Over 1 million tech questions and answers.

TDL-4 Virus Through Wifi / Router?

Q: TDL-4 Virus Through Wifi / Router?

Does anyone know if the TDL-4 virus (I have a variant of it) is able to infect a computer through a neighbors unsecured router? As careful as I am I keep getting it back. I used to run a hosting company year ago and have a good amount of experience with PC’s – never seen anything like this before however

I'm trying to figure out how I got it on my brand new PC within minutes after I opened it (running Win 7 Home Premium)

> Before first boot I unplugged my router / cable modem wifi switch on PC shut off and shut down all other PC's owned
> Created Restore DVD's via brand new blank DVD's
> Installed Kapersky Anti-Virus (using store bought CD) and scanned
> Plugged in modem only and ran hardwire connection to PC (wifi and router still off)
> Installed All Windows Updates and Kapersky updates and ran full scan again
> Installed and updated Malwarebites from manufacture website) http://www.malwarebytes.org/
(receieved noticed of blocked tunneling attack)
>Installed and ran hijack this (manufacture website) http://free.antivirus.com/hijackthis/
Which verified I had TDL-4 / Bootkit

Is this even possible? Any idea what steps I should take once I get it back from Sony and it’s clean (I hope)

RELEVANCY SCORE 200
Preferred Solution: TDL-4 Virus Through Wifi / Router?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: TDL-4 Virus Through Wifi / Router?

Hello, I moved this to Am I Infected as you probably have not removed it. I doubt it went across. But if they are redirecting then its another problem and needs to be fixed.Download the FixTDSS.exeSave the file to your Windows desktop.Close all running programs.If you are running Windows XP, turn off System Restore. How to turn off or turn on Windows XP System RestoreDouble-click the FixTDSS.exe file to start the removal tool.Click Start to begin the process, and then allow the tool to run.Restart the computer when prompted by the tool.After the computer has started, the tool will inform you of the state of infection (make sure to let me know what it said)If you are running Windows XP, re-enable System Restore.Download aswMBR to your desktop.Double click the aswMBR.exe to run it.Click the "Scan" button to start scan:On completion of the scan click "Save log", save it to your desktop and post in your next reply:NOTE. aswMBR will create MBR.dat file on your desktop. This is a copy of your MBR. Do NOT delete it.Please download MiniToolBox, save it to your desktop and run it. Checkmark the following checkboxes: Flush DNS Report IE Proxy Settings Reset IE Proxy Settings Report FF Proxy Settings Reset FF Proxy Settings List content of Hosts List IP configuration List Winsock Entries List last 10 Event Viewer log List Installed Programs List Devices List Users, Partitions and Memory size. List Minidump FilesClick Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run. Note: When using "Reset FF Proxy Settings" option Firefox should be closed.

Read other 7 answers
RELEVANCY SCORE 53.6

Anyone use this?

Windows 7 Virtual Wifi Router
I ran it and when I hit Configure/View Comodo told me that it was trying to have full access of my keyboard.

Is this a Trojan?

A:Virtual wifi Router ... Is this a virus or trojan?

Windows 7 Virtual Wi-Fi router is a software emulation of the wi-fi adapter which is present in your computer.

This is not a Trojan. The purpose of this virtual Wi-Fi router is to allow you to create a wi-fi hotspot from your computer so that nearby computers may connect to it for internet access. If you already have a wi-fi router in your home then you don't need it. This will come in handy when you have a cable connection for internet and wants to give wireless access to other systems in your home.

If you have installed it from internet, you may uninstall it from Control Panel - Programs and Features. Otherwise you may disable it in Device Manager.

Read other 5 answers
RELEVANCY SCORE 53.2

Hi,

I recently bought dlink D2750U WIFI ADSL modem/router, for my ADSL internet connection.

But I have now changed my ISP, who provide internet via cable(not telephone line). The ISP guy provides a cable modem(old modem) along with it.

I have connected my PC this way:
Cable modem -> Router -> PC through RJ45. I am able to access internet from my PC, but I am not able to get wifi working on the router. And I am logging onto internet through a dial up connection.
Questions:
1) Please help in configuring the router to get wifi working.
2) Also, my default gateway seems to be either 0.0.0.0 or blank. So, I am not able to login to the modem unless I remove the modem connection. Please let me know if I am doing anything wrong here.

Here are a few more details:
Output of ipconfig: http://pastebin.com/Zr9Eb7L7
 

A:Using dlink D2750U Wifi Modem/Router As a Wifi Router

Hey Narain. The D-Link unit you have appears to be a combo unit (modem and wireless router) since it connects straight to the RJ-11 phone line. This unit won't work with an ISP that provides service by way of coax cable. The D-Link will work if you want to use DSL, but you need a cable service compatible modem or combo modem/router if you use cable service.

ftp://support.dlink.co.in/broadband/DSL-2750U/manual/DSL-2750U_C1_Manual_IN_1.00.pdf
 

Read other 6 answers
RELEVANCY SCORE 48.4

I have a desktop that is able to have wifi it's a adapter dell 1450 UBS Wireless 802.11a/b/g it works so does the router which is a Cisco Linsky E 1000 it shows um that it works I'm getting packet but I just can't seem to connect I don't understand it says that I am connected but I cannot get on the internet what am I doing wrong please help my desktop is compaq hp with wireless capability help!
 

Read other answers
RELEVANCY SCORE 48

I am currently stationed in Germany, and live in a village that has horrible internet. I cannot stream netflix, hulu, and downloads take several hours.

Is there a way to combine the internet that my cell phone receives and the wifi router I have at home to increase speed?

I have the ability to create a wifi hotspot from my cell phone if this helps.

Just something I thought up in my head, and wanted to find out if it is possible. Thanks in advance.
 

A:Combining Wifi Hotspot and Router Wifi for faster internet

You can, try this http://www.octopusplus.com/download.jsp or http://www.connectify.me/
 

Read other 1 answers
RELEVANCY SCORE 48

My HP ZBook does not connect to my D-Link  Model DSL-2750U rooter even though my phone and other laptops can connect to internet.

Read other answers
RELEVANCY SCORE 48

I am looking to replace my tired Linksys WRT54G router that is about 10 years old. I love the router, and its even better with DD-WRT on it, but I'm starting to have troubles with the wifi dropping all the connects for a couple seconds when running all my wireless devices. I have 3 smart phones, 2 tablets, 1 Chromecast, a smart TV, and Roku + a laptop or 3 in my house right now, and it seems like its getting to be a bit much for it.
I have had to completely re-flash the firmware twice this year to get the wifi working again, so I'm thinking its time for replacement.
I have been thinking about just getting the new WRT54GL for $50, but I'm also thinking it might be a good idea to upgrade the wifi technology past wireless G .
I'm wondering if my Tablet (Nexu 9), and our smartphones (Razr HD Max) along with the Chromecast will take advantage of the new wireless standards and higher speeds or not? If they will can someone recomend a decent wireless router that takes DD-WRT nicely in the sub-$100 range? Thanks!
 

A:Looking for new Wifi Router - Will Tablet/Smartphone take advantage of new wifi Standards?

I been programming in Android/Linux since 2010 and there is code that supports VHT is Very High Throughput. Right now the standards are HT is High Throughput .

As for DD-WRT firmware is like your overclocking your router pushing it beyond the OEM limits. I use to use DD-WRT but had quit many years ago since the routers that used that firmware would fail too much.

So best to buy a better business type enterprise router wired then you can use WiFi router as AP or just get WiFi AP(access point). To me WiFi Router is also Wired Router, but to use just a wired router and use WiFi AP through a switch is better. If one or the other goes you can easy replace them. Where as if the WiFi Router fails you would need to replace it.

If you really want to use DD-WRT then Look at Buffalo WiFi Routers some come pre-installed with DD-WRT on them. Frankly you really don't need DD-WRT today because newer routers or WiFi routers are much better built and offer much more power NPU = network processor units and 128, 256, 512, 1GB of RAM some have Dual Cores.
 

Read other 9 answers
RELEVANCY SCORE 47.6

I have been trying for some time to accomplish the title result. I'm not techie enough to do it.

What I want is to be able to use a Tablet to read in the rear of my home (which is out of range for incoming wifi signal.)

If I can set up the computer to do this, I will cable connect to a router in that area.
I have two computers and could use either.

1.a PC running XP (should update to windows 8.1, but have never bothered to do that, since XP works just fine. (I had this computer sharing to the router, when I had DSL internet connection, using Windows wizard to set it up) Couldn't get it to work when I switched to WIFI internet access) I could switch to win 7 or 8.1 if that would help.

2. a Lap Top running WIN 8.1,

Any help is appreciated.

A:Internet access via WIFI and share WIFI via second router

Due to the age of XP this is not the best option for what you want to do

Either windows 7 or 8.1 have access to Internet connection sharing (ICS) built in

To use ICS you need at least two connections to the local LAN, these can be any mix of wifi or Ethernet.

As you have a laptop you likely already have a system to use for this

There is a tutorial explaining the basics ... and more on this site

Check it out and post back if you have any issues

Internet Connection Sharing - Create WiFi HotSpot

Read other 2 answers
RELEVANCY SCORE 47.6

Wifi doesn't connect when i move away from wifi router. I have a wifi router installed in my drawing room where i get good browsing speed on phones and laptops. But the problem starts when i take my laptop from drawing room to my bedroom which is not more than 5 mtrs from router. Wifi signal drops to zero on laptop whereas it remains decent on phones. Earlier my laptop used to connect in bedroom as well..This is happening lately. Is there any solution?

Read other answers
RELEVANCY SCORE 47.6

Hi Could you please tell me if this is possible:
My computer is connected to a wireless network. Can I hook up my D-link (DIR-412) to my computer and use the internet from the computer to output another wireless area?

Thanks sounds complicated.
 

A:Connected to WIFI and want to extend wifi with another wireless router

Where you live is your setup like this?

#1
Internet
Modem
WiFi Router

or

#2
Internet
Modem with built-in WiFi Router

If you want extend the WiFi you would get WiFi Access Point. Or you can take a WiFi Router and disable NAT, SPI, DCHP, then you create a static IP address. 192.168.x.50
 

Read other 2 answers
RELEVANCY SCORE 47.6

my HP 15 116 laptop wifi cannot connect to wifi router modem AND it keeep on saying "cant connect to this network" whereas it  can work perfectly fine on smartphone wifi hotspot . please fix it ......... DONT MAKE ME REGRET ON BUYING HP LAPTOP ....

Read other answers
RELEVANCY SCORE 47.6

So I got a new router yesterday to replace the old one, and I've been working on it for a long time. But I can't seem to figure out why there isn't any internet connection. The new WiFi Router (D-Link DR-842) Shows it is connected to the internet (green light) but in the setup page, it says disconnected. Could the PPPoE details be causing this? As far as I know everything is correctly set up except for the internet part.
 

Read other answers
RELEVANCY SCORE 47.2

i have posted this but no one has even viewed it as the title wasn't very good.

Anyway, i have 2 wifi routers, one in the lounge that is on internet, one in my room that is not.

i want them both to be able to supply internet.

the one in my room will just be used to ethernet internet into my PS3.

alternative is that i use the wifi on my laptop then ethernet my laptop to PS3, is this possible?
 

A:Wifi router to wifi router? so i can use PS3 via ethernet

Read other 16 answers
RELEVANCY SCORE 46.8

Hello, I am a bit of a hard time with 2 routers on one network and unfortunately as things stand now they both have to be there. So I just got ADSL and the only modem option available to me was one with a 4-port wired router, I hooked that up into my existing network of about 9 computers (5 laptops and 4 desktops) which is connected by another 4-port WiFi router.

I started out with my only goal of hooking 3 of these computers to the internet after I got the DSL by some MAC filtering configured in the WiFi router. But, having the DSL modem/router has created another issue. I am using 2 separate IP gateways for both the routers which are in the same subset, I can connect to both of them from all my machines. The problem is I don't have any control over which computer connects to what router. I am trying to avoid setting each PC up with a static IP that needs internet access.

Here is my setup in more detail. My ADSL router is 192.168.1.254 and my WiFi router is 192.168.1.111 and both have the subnet 255.255.255.0. My ADSL connection has dynamic IP and the modem/router is connected into a LAN port on the WiFi router. I have tried disabling DHCP on the modem/router and changed my WiFi router IP to that of the modem (which was counter productive) to no avail. Someone mentioned MAC address cloning but I am not sure if it will work in this setup. Since I configured this I am seeing quite a few IP conflicts, which are probably my fault as I didn't check when I was setting... Read more

A:Wifi Router + ADSL Router = Issues with dynamic IP

Read other 6 answers
RELEVANCY SCORE 46.8

I have a Netgear WGR614v9 router and was wondering if its possible to use this as a wireless adapter for my computer?? I think it might support the DDWRT open source firmware??? I am wanting to do this STRICTLY as a learning purpose.
 

A:Solved: use my wifi router as wifi adapteR??

Read other 8 answers
RELEVANCY SCORE 46.8

I just want to know if its possible to connect your wifi broadband to wifi router? and if it is, How?
 

A:HOw to Connect wifi broadband to Wifi Router

I may be misunderstanding you but if you're getting WiFi out of your broadband appliance already, you don't need a router. If you do want to use a WiFi router, you're not going to be using the WiFi signal from the broadband appliance.
Sent from my iPhone using Tapatalk
 

Read other 2 answers
RELEVANCY SCORE 46.8

Actually my wifi adapter can catch all other wifi signal except my wifi router.

A:my notebook wifi adapter don't get my wifi router

There are several resons.1. The wifi signal might be too weak at the point where the computer is.2. Other device radiation/signals might be blocking it.3. Your router signal might be hodden (check EWS of router).4. Signal broadcasting might have been turned off on router. Since other signals are found on the computer, there shouldnt be a issue with your couputer.

Read other 1 answers
RELEVANCY SCORE 46

Hello one and all,
I am sincerely hoping someone can assist with my little networking problem as i'm tearing my hair out now..

Here at work we have a Vigor Modem/Router hosting our connection to the world. It was originally on DHCP & the 4 computers & 2 printers found their own IP addresses without problem.

We added a Linksys router via ethernet (to a lan port not the wan) in another area of the yard. This was fine also on DHCP and connecting wirelessly from a laptop or mobile phone was a doddle.

Then our oh so wonderful IT geek decided to put the Vigor on a Static IP along with all the computers connected to it. This has some how cut off the wifi capability of the Linksys router now.

It is basically acting as a hub for two laptops and nothing else.

In simplistic terms with some detail what settings need changing on the Linksys if any?

The Vigors internal IP is 192.168.1.1
Linksys is 192.168.1.4
both on subnet 255.255.255.0

I have been advised to set the Linksys to a static IP on the Internet Connection option but what set of figures do i need for that??

Fingers crossed...

Stonkin
 

A:Adding a wifi router to router on static IP

Read other 9 answers
RELEVANCY SCORE 45.2

Hello,

I have a wireless adsl router in preparation for broadband arriving in our area soon (long story), and have some questions:

I have a laptop with wifi card and want to setup a home network with this, and my PC (plugged-in via LAN cable to the router).. laptop is XP, PC is Win2K
I can't seem to get this to work. one minute the PC can 'see' the laptop (in network neighbourhood) and then the other way round, but I can never access shared directories on either... is there a good guide somewhere to set this up?

Also, shouldn't I be able to use the router from the PC as if it were a wifi card?
i.e. on the laptop, once the wifi card is plugged in, it displays all wifi networks in the area and their signal strength etc.... how can I do this using the router/PC??

With the laptop I can connect to our neighbours wifi router and use their bradband connection, but I want to do the same from the PC.. is that possible?

Thanks in advance all..

(P.S. router is a D-Link DSL-604+)
 

A:Wifi Router / Wifi Network help!?!?

Read other 11 answers
RELEVANCY SCORE 42.4

Hi there

If you've a spare / old router which you can set up as a wifi bridge and connect a bit of LAN cable from Laptop into the Bridge router you'll generally get FAR better performance from even a cheap router.

Logic behind this is that most Wifi adapters are half duplex whereas a router is full duplex and throughput will be significantly better.

Another advantage is that you can still use 5 GHZ band even if your PC or whatever only can handle 2.4 GHZ wifi.

If your router doesn't have bridging facilities you can often do it by a firmware upgrade --for most routers try this :

www.dd-wrt.com | Unleash Your Router

Note --this is the Bridging router --not your main one that you use to connect to your ISP with --don't want to cause people to have inoperable boxes !!!!!.

I've found using a Router as a bridge far better than having to have loads of LAN cable all round the house --and also antennae in wifi routers are hugely better than most built in Wifi cards so you can in a lot of cases avoid extra slowdown caused by wifi extenders.


In my "man shed" -- a good 100 metres from the main house - could just about get 8 Mib/s on a very poor 2.4 GHZ wifi signal from the wifi card

Laptop now acceptable - still with 2,4 GHZ wifi but using "Bridged" method with an old EDIMAX wifi 4 port router. Around 70 Mib/s (still a lot slower by about 10X - I'm getting nearly 1Gb/s download in main house on 5 GHZ wifi --ISL has excellent Internet !!!... Read more

Read other answers
RELEVANCY SCORE 41.6

How would one set up a home wifi network with a non-wifi router? I have a router for my voip phone but it is not wireless. Do I just add a wireless card to my main PC?

I do not want to remove my current router. None of the wifi routers I have looked at have VOIP ports on the back.

Will adding a wifi PCI card do the trick? Most of the wifi cards show them in use with a wifi router.
 

A:wifi with non-wifi router

what about a wifi access point that plugs into an ethernet port on your existing router?

you can use a wifi card to do the same, but its a bit fiddly..

by the way, is it just to network pc's only?
 

Read other 9 answers
RELEVANCY SCORE 41.6

my hp 15r005tx shows wifi connection only beside the router. it shows range for non of the mobiles hotspots or and wifi connections unless they are placed right beside it. Also the wifi range it shows is weak even when wifi router is right next to it. apart from all this looses after every 5-10 minutes i have tried upgarding and reinstalling drivers multiple times but it was of no use. this is my first computer and i dont have a lot of knowledge about computers, also upgrading the pc drivers when internet connection barely lasts for 5 minutes is a very hectic task for me. The service centre guy is in no mood to solve my problems and blames the windows 10 upgrade for this issue but this thing happend 2 months after the upgrade. i feel very helpless about this problem... PLEASE HELP ME!!!! i will be thankful for your reply...

Read other answers
RELEVANCY SCORE 41.6

Hello!
 
My family computer has Win8.1 OS, with internal Wi-Fi Internet access. And for some strange reason, it now has limited access to the Internet.
 
When I try visiting most websites, the page loads and 20 seconds later I get an ERR_CONNECTION_TIMEOUT message. The same message pops up on multiple browsers (Firefox, Chrome, Internet Explorer).
 
We've had this issue since late January (and we've had lots of bad weather lately), so I thought it might clear up overtime. But the problem never resolved itself; we keep having the same issues every day.
 
Here are some other details:
The family PC has two accounts: one is a kid account (with no administrative rights), and the other is an administrative account The kid account is used the most...so I'm wondering if some sort of malware came in through that account, despite it not having any administrative rights, and then it infected the entire PC.
 
Non-PCs (tablets, smartphones, etc.) don't seem affected by this. They have full Internet access via Wi-Fi. (That said, it sounds like the issue is a bug that's targeting this PC specifically?)
 
If I use an Ethernet cable (instead of Wi-Fi) on the PC, it will also have full Internet access.
Does this sound like the work of some malware? Or could actually be a really strange modem/Win8 problem??? I somehow don't think it's a technical issue.
 
I've attached my documentation in the code box below, and you can view the Addition attachment h... Read more

A:PC Wifi Virus? (ERR_CONNECTION_TIMEOUT) - only affects PC WIFI

TWO IMPORTANT THINGS:
1. I made a major typo in that second line. It should say:
When I try visiting most websites, the page ATTEMPTS to load and 20 seconds later I get an ERR_CONNECTION_TIMEOUT message.
 

...Nothing actually loads. Except Google.com, and occasionally Facebook. (See below.)
 

2. Using an Ethernet cable DOES NOT really work. (I was able to go to Facebook with it, and that's it. Every other website still gives the Timeout error.)

Read other 3 answers
RELEVANCY SCORE 41.2

I was selected to participate in the FCC's broadband tests facilitated by Sam Knows (SamKnows - Building a broadband measurement solution for Europe and America)

They are suposed to be sending a Netgear WNR3500L and I would like to know how it stacsk up against the NetGear WNR1000v2 (Wireless N 150 Router)

Thank you for your help

A:Can you tell me which is the better Wifi router?

Well you could do a side by side comparrision and decide what you think. Here's the WNR3500L Answer

Then the WNR1000 v2 Answer

Check the specs and look at the forum questions and problems.
Just a thought
Fabe

Read other 1 answers
RELEVANCY SCORE 41.2

So currently i have a Netgear WNR2000V4 and it sucks! the speed of it drops from 60mbps to 20mbps and stays there. even after reboot. it sucks and nothing will fix it.

so im in the lookings for a new router. im looking to spend less then $70. anyone know of a really good 300mbps router? i will be connecting 10+ devices to it at all times.

i was looking into these but open to suggestions:

D-Link Xtreme Gigabit Wireless N300 Router (DIR-655) - Newegg.com

TP-LINK TL-WR1043ND Wireless N Gigabit Router Up to 300Mbps/ USB port x1/ Detachable Antenna x3/ IP QoS/ QSS Button - Newegg.com

A:Wifi Router

anyone? ideas?

Read other 1 answers
RELEVANCY SCORE 41.2

The thing is that I want a n router, a wifi one. Now I want QoS and good port forwarding since is going to be for gaming. Also it has to have good coverage.
Also I have heard about some that come with a USB extension for a hard drive so you can have a newtowork hard drive. Is that true or you need a nas hdd for that?

So as you can see I would appreciate a lot of feedback, some models, brands, links, etc. It's all going to help.

Thanks guys.

A:Need a new wifi router

Bump
anyone?

Read other 1 answers
RELEVANCY SCORE 41.2

Present router:
Netgear N900[WNDR4500]wifi router.
Wired it gets 125
wifi[in SAME room or any place in house, ]always low 20's

I understand the newer "AC" wifi routers are superior, would an "AC router"help me get over low 20's wifi through out my house[rectangle shaped 2500 sq ft/dry wall construction/NO BRICK,etc]...?

Kindly recommend a new product, ty
 

A:Should I get a new wifi router?

btw, the Netgear N900 router is wired to SURFboard SB4161 Modem...fyi
 

Read other 1 answers
RELEVANCY SCORE 41.2

can i connnect 2 computer (1pc and 1 laptop) wirelessly without a router. if so what do i need and slo do any of you guys know of any good wifi tools about that are free. thanks
 

A:wifi with no router

Read other 10 answers
RELEVANCY SCORE 41.2

I am using virtual router+ in my laptop....and using wifi with my xperia L.....but for a few days after connecting wifi with my phone it's not working...it just works for a second then autometically disconneted......its neither my mobile problem nor software it just a problem of my laptop.....please give me a solution.....what should I do?????????????
 

A:Wifi router

Simplest and easiest solution is the get a "real" wireless router & connect your laptop & phone accordingly.

Need a few questions answered before we can really help you further because there are too many vague things in your initial question...

Who is the ISP?
Did the ISP provide you with a cable modem or DSL modem? Does it have built in WIFI?
How did you setup the wifi from the virtual router software? WEP, WPA, etc?
Is the laptop connected to cable/dsl via wire or is it wireless? if it's wireless then for God's sake just use that wifi for your phone as well!
Is the laptop a PC or Mac? What version of Windows or Mac OS X are you running?

Post back, Hope this helps!!
 

Read other 1 answers
RELEVANCY SCORE 41.2

What wifi router should i get for windows 7? if it helps i have a lenovo tower. thanks
 

A:Wifi Router

Read other 13 answers
RELEVANCY SCORE 41.2

I have a Belkin wireless router. I have a Belkin wireless print server. The router is not connected to the Internet because where I live, only has WIFI service. Which means I also have a Linksys Speed Booster,WUSBG54 to connect to the internet. My problem is that my print server will only print if the CAT 5E is connected from my laptop to the router. At that point I lose my Internet connection. I have to unplug the CAT 5E from the back to gain Internet access.
Is this the way it has to be?
 

A:WIFI Router

Configure the router and get the wireless printer to work. Through the router, (it should not need the internet to print), Then Configure the wireless adapter to connect to the internet. Not sure, but it should work.
 

Read other 2 answers
RELEVANCY SCORE 41.2

Have a verizon router actiontec mi424wr all of the sudden I cannot conect to the internet thru wifi I have directv 2 laptops and a cell phon and now nothing will connect to the internet had verizon send me a new router and still same problem. I get 2 messages one connection is limited and the other not valid ip address. can anyone help
 

Read other answers
RELEVANCY SCORE 41.2

i have Macbook pro 2011 model. Currently i am using network via ethernet, but since few month my mikrotik RB951 wifi router in not working. I tried to reset to the router but its not connecting. my computer also could not open its setting by its number 192.168.168.1. please help in this concern.
 

A:wifi router

Try doing a FR (Factory Reset) on the router

Might need to be replaced
 

Read other 1 answers
RELEVANCY SCORE 41.2

Windows 10 trendnet tew711br TWC ethernet connection

Worked ok at first than I forgot password and tried to reset. Now all I can get is ethernet and cannot connect to chromecast or other devices. Wifi sign is there but it remains on ethernet. Help and thanks.
 

A:Cannot get router to go wifi

Read other 16 answers
RELEVANCY SCORE 40.8

I have a pocket wi-fi being shared by 3 laptops.. I want to connect a Zyxel Wireless N-lite Home Router so that I can also plug-in other LAN connected devices, e.g. VOIP phone. Is there a way to connect it or are there other devices I need for this internetworking. By the way, currently the router is connected to WiMAX broadband modem which I want disconnected already due to low available bandwidth.

The laptops OS are XP, Vista and Windows 7 and MacOS.

Thanks very much guys and more power to you.
 

A:Wifi/ Router Connectivity

Read other 6 answers
RELEVANCY SCORE 40.8

Tried configuring wifi router on my laptop but the login page was not loading.....neither on chrome nor on IE.
Later Successfully configured Router through mobile, i was able to use internet through wifi on my mobile without any problem.
When i again tried to use wifi on laptop it shows following errors. Pls help ...

Read other answers
RELEVANCY SCORE 40.8

A friend purchased a new laptop and signed up for Clearwire broadband. That is broadband broadcast from an antenna and he is at the very edge of the transmit range (about 6 miles from the antenna.) They provide a modem indicating signal strength one to five bars. The only place at his homesite to get over one strength bar is at the far end of his exterior deck. There is a waterproof modem made to match the Clearwire broadcast, and an electrical plug is available on the deck.
The problem is connecting that exterior modem to a computer located inside the house.
It seems there are three choices:
1. hardwire the modem with a long cord to the PC.(through a window)
2. hardwire the modem to a router inside the house with a long cord.(through a window)
3. hardwire the modem to an EXTERNAL ROUTER with a short cord (no wiring into the house.)
I searched Google for waterproof router with poor results-everything from bedpans to waterproof paints for router carved furnature.
HELP-can someone aim me toward a waterproof router or enclosure suitable to house an external router!
 

A:Waterproof wifi router

Get a water proof electrical box and house it in there and mount an external antenna. Or run the cat 5 under the deck to the house. One run would not be that hard to pull and terminate.
 

Read other 3 answers
RELEVANCY SCORE 40.8

I have the linksys WAP11 router and only one computer (laptop(MAC)) works on it at a time. I called Linksys but they say I have to pay $ to get the answer ( I am out of warranty period). Any advice. I am using two MAC's and have my modem connecting to my Wireless Access Point WAP11 wifi router.
 

A:How do I use 2 laptops on one wifi router?

It looks like the WAP11 is only an Access Point. Do you have a router connected as well? The router allows you to have mulitple computers online at the same time. Right now you are only connected through your modem, which allows 1 computer to connect at a time.

You need to get a router if you do not have one. Once you have a router, you can post back and we will help you set it up.

BTW
:wave:Welcome to TechSpot:wave:

Would you please take a few moments to read the following. It will help to make your Techspot experience a more pleasurable one.

Techspot FAQ.

A message for all newcomers.

SNGX1275`s A guide to making a good post/thread.

Thanks.
 

Read other 8 answers
RELEVANCY SCORE 40.8

Hi evrybody! i am new here and my english is not very good, sorry)Please help me,- what to do? i got a new HP notebook, we instoled Windows 8.1, and at home i tryed to connect it to wifi. The problem is: only very close to the router- my new PC can see it, and when i go as far as let say 3-5 m- no wifi and even its dosnt see any network/ ( my DELL- old one- even can see others wifi from the street, and can be connected to my network evrewhere in my 3 levels  house/ its a big problem for me- i cant seet next to the router only to stay conected to wifi/My rouer is new also and good/ Smthg wrong with my new HP or it can be fixed somehow? thank u  for cleaf advise!!

Read other answers
RELEVANCY SCORE 40.8

I am looking into purchasing a replacement wifi/router with vdsl that is capable of running a VPN. There are so many to choose from, any recommendations? Also is it possible to set these VPN routers up so that only certain Lan ports are VPN enabled and some ports remain on the standard network (not VPN enabled)?
 

Read other answers
RELEVANCY SCORE 40.8

I'm going to re-format my C: drive in the next few days. The computer's slow as anything and it keeps crashing alot.

I run a WiFi router from it, to serve as a connection for my laptop. I presume I will have to re-install the drivers and set-up from scratch. What settings should I look at writing down so all this is easier to do? It took me ages to get it up and running first time. I run Zone Alarm.
 

A:WiFi router set-up after format

Well, unless you have a very unusual configuration, your router or the connection to the laptop should not be affected at all. If you have a wired connection to the desktop, the default TCP/IP configuration after the install will connect just fine. Obviously, you'll have to configure ZoneAlarm to allow access, that that's not anything to do with the router.
 

Read other 3 answers
RELEVANCY SCORE 40.8

I guys, heres my configuration

modem (wired)---->TW100-S4W1CA (wired)---->Nexxt Nebula 150

I want to have a wifi connection trhough the nebula for laptops, ipad y cellphones, but i can only get to the nebula setup screen and no wireless connection

Can u help?

Thanks
Reuben
 

A:wifi router setting

Read other 8 answers
RELEVANCY SCORE 40.8

Hello, Could anyone suggest me a great wifi N router? Something not too expensive. Maybe sub-$100 range. Two things that are most important to me - range and connection stability. I'm not too big on throughput and I dont stream any video wirelessly. I've heard a lot about the D-link DIR 655. Its one of the oldest around and seems to be still quite popular.
 

Read other answers
RELEVANCY SCORE 40.8

can malwares or viruses come from a wifi router in a public; a coffee shop, a public library, a restaurant, or school?

A:malwares from a wifi router?

In public wireless places, malware comes from the other computers that are on the network, not the router. Always make sure your firewall is set to public, so it will stealth its ports to all other computers on the public wifi network. That way, other computers will not be able to see your computer while connected to the network. Other than that, it is no different from being at home.........There is always a risk of a malware infection any time you are on the web. Always use antivirus software, keep it up to date and do periodic scans with Malwarebytes and HitMan Pro (both are free).

http://www.surfright.nl/en HitMan Pro
http://www.malwarebytes.org/ Malwarebytes

Read other 1 answers
RELEVANCY SCORE 40.8

So I've tried setting up my desktop PC to create a hotspot so my mobile phone could get a WiFi internet connection at home.
However, I've run into some problems.

I used some guide I found online that used the Command Prompt to set up a hotspot using two lines:
netsh wlan set hostednetwork mode=allow ssid=Test key=testingnetwork
netsh wlan start hostednetwork

And this seemed to work fine (phone connected and I went online on it). However, I wanted this network to start automatically everytime I started up the PC. So I put those lines in a batch file and used the task scheduler to set that .bat file to run everytime I log in (using administrator rights).
However, it seemed that now my phone did connect to the network (WiFi connection symbol appeared), but I didn't receive any data. When I tried to run the script again, the first line executed fine, but when I tried to activate the network, I got this message:
"The hosted network couldn't be started.
The group or resource is not in the correct state to perform the requested operation."

And in the network settings, the created network didn't show up.
Any idea what might be going wrong?

A:Using desktop PC as WiFi router

You don't have a wireless router, just a computer with a wireless adapter connected to the internet by cable? Just trying to be sure what is going on.

Read other 4 answers
RELEVANCY SCORE 40.8

hello people, plz some one help me out. i have a vodafonemobile wifi router R207-. I have databundles loaded, but still cant use this wifi router on my mobile phone or laptop. even i may be connected to it. what might be the problem? thank you

Read other answers