Over 1 million tech questions and answers.

Would like to become a Network Engineer but need some advice.

Q: Would like to become a Network Engineer but need some advice.

Hello,

I'm entering my junior year in college majoring in Computer Science but would like to eventually work as an IT Specialist or a Network Engineer in the future. What are some things that I can do or read that will help me to familiarize myself and get an early start in the networking field? Thanks.

Regards,

Jerry

RELEVANCY SCORE 200
Preferred Solution: Would like to become a Network Engineer but need some advice.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Would like to become a Network Engineer but need some advice.

bump

Read other 2 answers
RELEVANCY SCORE 58.8

I am almost done with my associates degree in Computer Networking. So I am not a total noob at this, but my friend's computer has me stumped. Here's the scenario.

They have a wireless network. The router and modem is upstairs, with a mac connected to it. Downstairs are two pcs, both wireless. Things have been working for about 7 months just fine. Then, the other day both the wireless computers couldn't get on the internet. Running an ipconfig shows both computers still on the network. Both computers were able to ping each other and the router. I released the ip addresses and renewed them, DHCP server works fine, issued them the ip address. Both were once again connected to the network, able to ping the router. Still can't get on the internet though. I checked the access lists, which I set up for them 7 months ago so just their computers can get on. Nothing has changed, their mac addresses are still the only ones that can get on.

So I got rid of the access list anyway. Same thing, computers are on the network but can't access the internet. Shut encryption off on everything, nothing changes. Reset router to factory settings. Nothing changed.

So, has anyone encountered this before. I am completely stumped. The computers are on the network, they can ping each other, ping the router, but the wireless pc's cannot access the internet, only the directly connected computer can. Signal Strength is excellent. Sharing files printers, everything is grea... Read more

A:Need a really good Network Engineer here

Read other 7 answers
RELEVANCY SCORE 44.8

I need to theoretically network 4 PC computers for a class. The computers are currently running Win95. The specs of the computers are:

486/25 MHz processor, 80 MB hard drive, 8 MB RAM

486/66 MHz processor, 120 MB hard drive, 16 MB RAM

Pentium 75 MHz Processor, 120 MB hard drive, 16 MB RAM

Pentium 133 MHz processor, 1 GB hard drive, 32 MB RAM

Security is not important. Trying to find an inexpensive solution. The users will not be technical wizards.

Questions - What type of network would you recommend and why? What role would you assign to each of the four workstations and any other equipment you recommend? What type of upgrades might the workstations require to make your solution work?

please help me, thank you
 

A:{Advice Offered} - need advice for network

Well, I would put in one NIC per computer, use standard Windows 95 peer to peer networking. I would try to upgrade all machines to at least 32 meg RAM, but 16 would do if I couldn't manage 32.

Hell, I guess 8 would work, but it sure would be slow.

I would go with CAT5 patch cables and a small, inexpensive hub, to physically connect the machines. You could use BNC (coax type) cable and skip the hub, but hubs are so cheap now that I don't think that is a good idea.

As for roles - put all the shared files on the P133 since it has the most space and is the fastest.

------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

Read other 3 answers
RELEVANCY SCORE 43.2

I am using Firefox and had an auto upgrade. Since then my hard drive seems to be in a perpetual seek mode, two days. It has done this before but after an hour or so it would stop. I have "Acronis True Image Home" installed. I have two 500G hard drives installed. Task manager shows no appl running and no CPU usage.

Read other answers
RELEVANCY SCORE 43.2

i am trying to run pro engineer on my dell xps 210. i can start the program but when i try to use it, it just vanishes, any ideas please.
 

A:Pro engineer help

Is the machine powerful enough to run the program?

Have you had this copy installed on a different machine before?

What version of Pro Engineer do you have?
 

Read other 3 answers
RELEVANCY SCORE 42.8

Looking at implementing an SBS 2008 network for a client. All was going well until:

1. Found out SBS 2008 only supported 1 NIC
2. Client wants all wireless.

In my SBS 2008 Admin book, there is a diagram (see attached file).

Now, what I'm thinking of doing is using a DIR-655 Xtreme N Gigabit Router.

This has a WAN port and 4 LAN ports and has the benefit of being wireless.

The DSL modem would be hooked up to the D-LINK wireless router. The printers (it's a small office) would be hooked up to the LAN ports on the router, as would the SBS 2008 server. All desktops and laptops would have wireless LAN cards installed and connect to the router to gain access to the server.

Would this work? It's effectively like the other file attached (option 1.jpg - this is from HP's SBS setup guide) but wireless.

The only thing I'm not yet sure of is if it's just a DSL modem or a modem/router (client is based in a business centre). If the later, option2.jpg (attached) should do it.
 

A:Network advice - small business network

Read other 9 answers
RELEVANCY SCORE 42.8

Hi can anyone suggest a solution to my problem.
I am trying to run Pro engineer wildfire 3 on my Dell XPS 210, it has a the standard grafics card that came with the machine which has 512 on board, i have upgraded the Ram to 4gb.
Proengineer installed ok and will start but as soon as i try to use the program it just vanishes . If i just let it fireup and stand there it is fine.
Any help would be much appreciated, thanks.
 

Read other answers
RELEVANCY SCORE 42.8

My pc has given up the ghost! The video drivers have now packed in along with many other problems. Does anyone now a good PC Repair Engineer in the North West Kent area (near Swanley)?

Cheers.
 

A:PC Engineer in Kent?

Read other 9 answers
RELEVANCY SCORE 42.8

british gas alarm kp55010z

please can someone here tell me hjow to or what the engineer code is for this alarm? its a long shot but would be brill thanks.
 

A:engineer code?

don't know if this is you too...
http://uk.answers.yahoo.com/question/index?qid=20100525125233AAtdVGe
 

Read other 1 answers
RELEVANCY SCORE 42.4

I have encountered those delightful folks who get call you out of the blue, try to make you think that they are from MicroSoft, and tell you that there are horrible things wrong with your computer (it's been sending out signals, you see) that only a Microsoft Engineer can fix, and they will make it all better and cover you for a year for around $200. Right, sure, and I'm a Surgeon General of the United States Engineer and I will keep your nose out of your ass for a year for $200.
 
But--I have been using Avast as my antivirus for some time now, and it seems to be effective and user friendly. But now I had occasion to call them, and they ran some diagnostics and told me essentially the same thing as the above-mentioned scam agents. Deep down in my computer, it seems--so deep that it would make no difference if I replaced the hard drive and installed the OS (Windows 7 currently) from a new disk, I think they said even if I replaced the motherboard), there are baddies that only a Microsoft &c &c. And of course they offered to do it for around the same price.
 
Now I ask myself: Is there really anything that Microsoft Engineer from Avast can do that, say, Bleeping Computer cannot? Is there really a subbasement in the bleeping computer that only God or the mighty MS Engineer can get to? I'm skeptical, and I would much rather have you guys run Hijack This and ComboFix and do whatever is needed, because I know from experience how good you are. What he found was a l... Read more

A:"only microsoft engineer can fix your computer" for $$$?

I've never had occasion to contact Avast! support, so I don't know what they do or do not do.  I will say that there is nothing a Microsoft Engineer can do that taking the steps that you stated would not accomplish.  If the problem can't even be resolved by replacing the motherboard then it just isn't getting fixed.  Guess you'll just have to switch to Knoppix
 
What is the problem that you are having?  I'm from the nuke and reload school of thought.

Read other 3 answers
RELEVANCY SCORE 42.4

Hi All,

I am interviewing some desktop engineers soon and as part of the interview I would like to do a practical test.

I am would like some of your recommendations / experiences of what practical tests you have ever had to do or given.

Nothing too simple, something challenging.

We use windows XP and Dell machines

Also maybe some questions to ask

Look forward to your responses.

Thanks
Elliot

A:Desktop Engineer interview

This is a good start: desktop support interview tests XP - Bing

Read other 3 answers
RELEVANCY SCORE 42.4

Top 10 Concepts That Every Software Engineer Should Know.

Note: This article is one software engineering writer's opinion - not every computer scientist or software engineer would agree that these are the "Top 10", but they do quite nicely for an article post here.

-- Tom
 

A:Top 10 Concepts That Every Software Engineer Should Know

lotuseclat79 said:


Top 10 Concepts That Every Software Engineer Should Know.

Note: This article is one software engineering writer's opinion - not every computer scientist or software engineer would agree that these are the "Top 10", but they do quite nicely for an article post here.

-- TomClick to expand...

Very interesting, Tom !
 

Read other 1 answers
RELEVANCY SCORE 42.4

Hi,

I'm looking to purchase a specialist piece of software and am trying to search out any recommendations or advice from experiences you may have had. I work with AutoCAD and would like a package that can be used to analyse / model ground profiles to calculate the volume of earth contained within a section of ground.

In simple terms, I am looking for software to help with cut and fill estimating.

Any pointers would be appreciated.
 

A:Solved: Help a Civil Engineer...

Read other 10 answers
RELEVANCY SCORE 42.4

Hello,

I have recently been scammed with a transaction via PayPal but at the same time I was sent a file which I think was an attempt to take full control of my PayPal account.

It's a little kid that's doing this and he's using a VPN to access the Internet and a VPS to route the traffic of the RAT.

Is it possible to reverse engineer a Trojan at all to find some information I can send to his VPS provider to help track this guy down?

Read other answers
RELEVANCY SCORE 42.4

Im having a crap time with a dell pc and engineer is visiting me tomorrow to install new hard drive and then hes supposed to be setting my pc up so everything is running,the hard drive isnt going to have the facory preset of having the option of returning the pc back to its factory fresh mode so im wondering after the guy installs vista and my drivers for me,if i have problems in the future will i have to load drivers every time i use the vista recovery disc im a computer novice and im sad it seems i have the more complicated way of now doing things,i should add i only received the pc last thursday and one of their tech guys over the phone asked me to re install windows as the computer wouldnt set up properly or at least it did but when i re booted i just had a blank screen on my monitor,,which they have said is a known problem with vista and i have seen it mentioned on many forums,so basically it seems to be like pulling teeth getting any joy from dell
 

A:When engineer re installs visitor?

Confirm with the Dell engineer if your Vista recovery disc is just for the Windows OS only or if it also has all of the needed drivers and programs that came bundled on the computer. If it was Windows only and it was my computer, I would would be insisting that Dell supply me for free with any other recovery discs needed to restore the computer to full factory fresh conditions.
 

Read other 2 answers
RELEVANCY SCORE 42.4

I'm thinking of possibly minoring in computer engineering in college because of its supposedly high demand in the job market.
What do I need to know to become one? What type of "code" of whatever is needed? Is it like C++ or HTML or Java? I'm a newbie, so if you can just explain what I need to know and why would be nice!
 

A:What do I need to learn to become a computer engineer?

If you check the college prospectus, it will tell you the minimum requirements to study the course. You will generally need a basic understanding of how a computer works as well as how to compile code, with a basic knowledge of coding if possible, as you will be taught more on the course.
 

Read other 1 answers
RELEVANCY SCORE 42.4

Hello,

I have recently been scammed with a transaction via PayPal but at the same time I was sent a file which I think was an attempt to take full control of my PayPal account.

It's a little kid that's doing this and he's using a VPN to access the Internet and a VPS to route the traffic of the RAT.

Is it possible to reverse engineer a Trojan at all to find some information I can send to his VPS provider to help track this guy down?

Read other answers
RELEVANCY SCORE 42.4

Does anyone know what the options are for telecommuting in the Software Engineering field?
 

A:Software engineer telecommuting?

Read other 10 answers
RELEVANCY SCORE 42.4

Hi,

Sorry for posting this in 'Multimedia', but I wasn't sure where else it might go. Our Sky unit went wrong, so a Sky engineer came out (friendly chap) and replaced the decoder. However, when you press the ‘Sky’ button on the Sky remote now the TV doesn’t switch to SCART anymore. How can I get this working again? Everything’s working fine, apart from the fact the TV won’t switch to SCART when you turn the decoder on. You now have to use the TV remote to enable Sky. Any help would be much appreciated.

Thanks a lot,
Dan
 

A:Sky engineer messing up TV setup (help)

Read other 8 answers
RELEVANCY SCORE 42

Madam / Sir, on my Lenovo SFF   desktop 510s-08ISH- 90FN00BYIN I have three sata ports for 3drives. There are 2 drives pre installed. These drives get power from a cable with two sata power connectors and are connected to the motherboard with a 4 pin plug. Can this 4 pin power connector on motherboard support 3drives ??Regards John

Read other answers
RELEVANCY SCORE 42

My workflow is normally Solidworks, ANSYS, Matlab, and some other engineering software. I prioritized single core processing effeciency, and the GPU, so I ordered the following:2.8 GHz Intel Core Xeon E-2276M Six-Core64GB DDR4 | 1TB M.2 PCIe NVMe SSD15.6" HDR 400 FHD 1920 x 1080 IPS ScreenNVIDIA Quadro RTX 5000 Max-Q (16GB)So, a few questions: i.) It was hard for me to say no the the 8-core i9 as a gear nerd, I know the benefits of more cores. Would be interested in hearing feedback on if any performance differences between my setup and the i9 would even be noticable other than on a benchmark test? ii.) I wanted the 16GB VRAM in the GPU, so that was a factor in why I went with the GTX 5000. I am a bit ignorant to how hungry software are on resources, and where we are in technology today if 16GB VRAM is even utilized and beneficial? Are we a bit ahead of time with this one or is it worth having? Would my engineering software benefit from and utilize the additional VRAM? I know work load of course is a factor but please answer as best as you can. iii.) I was worried about the thermals with the i9 and even having a RTX 4000 paired with it. As we know the RTX 5000 is not offered with the i9. Am I ignorant in saying the setup I went with will have lower thermals and a more reliable and consistent performnce curve than any of the i9 iterations? iv.) Overall thoughts on my setup with my given workflow compared to a a different spec'd P53? Would you have... Read more

A:Just purchased a P53, have a few questions (Mechanical Engineer)

Fellow ME here. I work in the AEC industry and my work loads benefit the most from a few fast CPU cores. Autocad, for example, was optimal on up to 8 cores, and the user consensus was that you could get by with a decent gaming GPU (as opposed to an expensive workstation version). As I remember (and I haven't touched ANSYS and Matlab in more than 10 years), what you're using is very heavily bound by the CPU. Puget Systems has some Solidworks benchmarks that may highlight this. I got the Core i7 9850H with the Quadro T2000 and 32 GB RAM (16 GB from the factory, bought a matching stick and installed it myself afterwards) and two NVME SSDs (but my projects are on an external HDD, so these don't help as much). I'm satisfied with my decision. Back in August, when I ordered the laptop, there weren't any options for custom configurations. I would have liked the Xeon paired with the T2000, but it doesn't seem like this is an option even now. The 8 core i9 seemed very appealing, but I had to remind myself time and again that:- Turbo is no substitute for base clock, as much as the marketing hype says otherwise- I don't need as many cores (I upgraded from a 2c/4t Core i7 with a 2.8 GHz base clock and a 3.2 GHz turbo, and the actual speed in single threaded loads is not that different)- The price was better (paid for it myself), and the difference went into accessories (dock, cooling pad, RAM, additional USB hub, new carrying case). I'm not sure how much of a benefit the RTX5000... Read more

Read other 2 answers
RELEVANCY SCORE 42

I will be starting the first year electrical engineering program at my university next semester. I don't know much about computers. I just want your opinion on what model of laptop would be able to perform good with engineer-related software. I really don't want to break the bank but any opinion would be great.

P.S. I hear that lenovo is good but I'm not sure what kind of features I should customize it with.

Thanks for your time
 

A:Need an opinion on engineer capable comp

Read other 7 answers
RELEVANCY SCORE 42

My workflow is normally Solidworks, ANSYS, Matlab, and some other engineering software. I prioritized single core processing effeciency, and the GPU, so I ordered the following:2.8 GHz Intel Core Xeon E-2276M Six-Core64GB DDR4 | 1TB M.2 PCIe NVMe SSD15.6" HDR 400 FHD 1920 x 1080 IPS ScreenNVIDIA Quadro RTX 5000 Max-Q (16GB)So, a few questions: i.) It was hard for me to say no the the 8-core i9 as a gear nerd, I know the benefits of more cores. Would be interested in hearing feedback on if any performance differences between my setup and the i9 would even be noticable other than on a benchmark test? ii.) I wanted the 16GB VRAM in the GPU, so that was a factor in why I went with the GTX 5000. I am a bit ignorant to how hungry software are on resources, and where we are in technology today if 16GB VRAM is even utilized and beneficial? Are we a bit ahead of time with this one or is it worth having? Would my engineering software benefit from and utilize the additional VRAM? I know work load of course is a factor but please answer as best as you can. iii.) I was worried about the thermals with the i9 and even having a RTX 4000 paired with it. As we know the RTX 5000 is not offered with the i9. Am I ignorant in saying the setup I went with will have lower thermals and a more reliable and consistent performnce curve than any of the i9 iterations? iv.) Overall thoughts on my setup with my given workflow compared to a a different spec'd P53? Would you have... Read more

Read other answers
RELEVANCY SCORE 42

Madam / Sir, on my Lenovo SFF   desktop 510s-08ISH- 90FN00BYIN I have three sata ports for 3drives. There are 2 drives pre installed. These drives get power from a cable with two sata power connectors and are connected to the motherboard with a 4 pin plug. Can this 4 pin power connector on motherboard support 3drives ??Regards John

A:Power supply question for an engineer

Should not be a issue. Drives these days do not use a lot of power. Only real concerns for power supplies these days is graphic cards and CPU's. If you Google PSU calculator you should be able to enter in all your information and get a correct answer.  

Read other 1 answers
RELEVANCY SCORE 42

I am currently having a problem with my video in Pro/Engineer Wildfire and AutoCAD 2004. In both of these drafting programs, the cursor skips when it is moving across the screen. It is not solid like it should be.

The computer is a Pentium 4 1.7 Ghz, 256 MB RAM, 36.4 SCSI hard drive, 32MB Matrox Millenium Video G450 video card and a Windows XP Pro Service Pack 2 OS. There was no problem before I upgraded this computer from Windows NT 4 workstation. In NT4 the video was flawless. Certainly not in XP.

When I upgraded the computer, I installed the newest drivers. When I noticed the problem, I rolled the driver back to its previous version which did not work. I also have the video card set to full hardware acceleration. I have swapped the current video card with one just like it with no luck. I do not have a better video card to put in the machine.

Why would the video perform flawlessly in Pro/Engineer and AutoCAD 2004 while in a Windows NT 4 environment, but be skipping around in the same programs in a Windows XP Pro SP2 environment? Would a video card with more memory solve the problem? Are there any other steps I could try to troubleshoot and find a solution to this problem? Any advice I could get on this problem would be great.

Thank you.
 

A:Video Problems in Pro/Engineer and AutoCAD

Read other 8 answers
RELEVANCY SCORE 42

I was awoken with a phone call from an Indian supposed "Microsoft Engineer in the Technical department" telling me that my PC was generating and sending out enormous amounts of files and that I should get onto my PC in order for them to freely provide me with tools to eradicate my supposedly bad files causing this. Going onto my PC, I was "shown" (Told how to run it) the Event Viewer (Never previously used by myself). It showed 100's of ERROR reports that gave some credence to their statements. I did not realise at the time that these were merely common errors reported by the system. I later deleted them after finding out how to. A security-conscious individual of many years I am ALWAYS sceptical of such phone calls but sadly this time I decided that I may indeed be speaking to a Microsoft engineer and must allow them access or perhaps my PC would indeed be a major problem in a week's time. According to the con man my PC would close down eventually and I would be unable to retrieve any of my files again as the PC would not boot. I felt uneasy and still being rather sleepy, I was unsure as to his chat. Taken in by his speil I suspected a scam, especially since it was an Indian speaking and experience of bad business with such warned me off, but I felt that I may indeed be causing a problem to the Internet world and foolishly decided to allow them access to my PC. Once decided, they gained access via a software programme which they downloaded (Teamvi... Read more

A:"Microsoft engineer" rang me on saturday 17-07-10

Hello and welcome to Bleeping Computer. *Please Subscribe to this Thread to get immediate notification of replies. See HERE*It is important not to make any further changes or run any other tools/updates unless instructed to. This may hinder the cleaning process of your machine.*Please be patient, all Bleeping Computer helpers are volunteers and have lives outside this forum.*You must reply within 5 days otherwise this topic will be closed.=================================Please try to run GMER in safe mode. How to boot in safe mode: http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/Double click GMER.exe and if you are asked if you want to allow gmer.sys driver to load, please allow it to do so. If it gives you a warning about rootkit activity and asks if you want to run scan, please click on NO. In the right panel you will see several boxes that have been checked. Unchecked the following checkboxes: IAT/EAT Drives/Partition other than Systemdrive (typically C:\) Show All (don't miss this one) Now click on the Scan button and wait for it to finish. Once done click on the [Save..] button, and in the File name area, type in ark.txt and save it to your desktop.Post the contents of that report when you reply.

Read other 43 answers
RELEVANCY SCORE 42

Madam / Sir, on my Lenovo SFF   desktop 510s-08ISH- 90FN00BYIN I have three sata ports for 3drives. There are 2 drives pre installed. These drives get power from a cable with two sata power connectors and are connected to the motherboard with a 4 pin plug. Can this 4 pin power connector on motherboard support 3drives ??Regards John

Read other answers
RELEVANCY SCORE 41.2

this is one of the only logs that i can actually get.
please help.
ROOTREPEAL © AD, 2007-2009
==================================================
Scan Start Time: 2009/09/18 12:17
Program Version: Version 1.3.5.0
Windows Version: Windows XP SP3
==================================================

Drivers
-------------------
Name: dump_atapi.sys
Image Path: C:\WINDOWS\System32\Drivers\dump_atapi.sys
Address: 0xAAC0E000 Size: 98304 File Visible: No Signed: -
Status: -

Name: dump_WMILIB.SYS
Image Path: C:\WINDOWS\System32\Drivers\dump_WMILIB.SYS
Address: 0xF7A8E000 Size: 8192 File Visible: No Signed: -
Status: -

Name: PCI_PNP3408
Image Path: \Driver\PCI_PNP3408
Address: 0x00000000 Size: 0 File Visible: No Signed: -
Status: -

Name: rootrepeal.sys
Image Path: C:\WINDOWS\system32\drivers\rootrepeal.sys
Address: 0xAAA36000 Size: 49152 File Visible: No Signed: -
Status: -

Name: spnh.sys
Image Path: spnh.sys
Address: 0xF740C000 Size: 1052672 File Visible: No Signed: -
Status: -

Name: sptd
Image Path: \Driver\sptd
Address: 0x00000000 Size: 0 File Visible: No Signed: -
Status: -

Name: win32k.sys:1
Image Path: C:\WINDOWS\win32k.sys:1
Address: 0xF7816000 Size: 20480 File Visible: No Signed: -
Status: -

Name: win32k.sys:2
Image Path: C:\WINDOWS\win32k.sys:2
Address: 0xAABD6000 Size: 61440 File Visible: No Signed: -
Status: -

Stealth Objects
-------------------
Object: Hidden... Read more

A:ive got a malware nightware...i cant even run system repair engineer

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 41.2

I was curious as to whether or not anyone here knew the progam.

A:System Repair Engineer --kztechs Anyone Familiar With?

Some HijackThis experts use this program in the detection of malware. You would be better off checking with them.

Read other 3 answers
RELEVANCY SCORE 41.2

I had a Dell engineer arrive this week to replace the hard drive and screen on my Dell 7537 laptop. Dell customer support downloaded windows onto my usb key so that it would be ready for the installation.

Everything went fine and he installed windows on my laptop, but we didn't connect to wifi as I said I would use a faster internet connection later to download the drivers.
Now it turns out that the windows key used by the dell engineer wasn't the correct one and I can't activate my version of windows. Error code 0xC004C003. Is this because I originally had windows 8 on my laptop and then took the free upgrade to windows 10? I have asked if dell support could provide me with a key repeatedly but they keep deflecting the question.
Any help would be greatly appreciated

Read other answers
RELEVANCY SCORE 41.2

Team,
Please release the entity framework reverse engineer tool for visual studio professional 2017.
Regards,
Saravanan

Read other answers
RELEVANCY SCORE 41.2

 
 
Street is a master of deception: a social engineer, specializing in security awareness and physical compromise engagements. He’s outspoken, friendly, always wearing a smile, and besides working in the field, he’s also the InfoSec Ranger at Pwnie Express, and is well-known for his books and conference talks around the world.
 
The life of a social engineer: Hacking the human
 
Pretty good article about a social engineering guy. I'd say he is probably one of the best out there. One thing I don't think I ever really thought about with social engineering attacks, is that the people that do it are incredibly smart. Their skill set has to be broad. You gotta be confident and willing to talk to complete strangers and at least know above average IT related stuff.
Being a Security Engineer myself it is pretty fascinating reading these types of articles.

A:"The life of a social engineer: Hacking the human"

Nice little article, I enjoyed it quite a bit. I don't think I'm the kind of person that will fall for social engineering that easily, since I'm aware of that concept, how to protect myself against it, etc. but I'm sure that I would be totally helpess against pros like him (he could get me at any moment).

Read other 3 answers
RELEVANCY SCORE 41.2

Hi, I'mtrying to run Pro-Engineer Wildfire 4 student edition to run on Windows 8. Ican?t get it to launch, and I get a message that says it?s not compatible. Isthere anything that can be done as it did run on Windows 7?

Any help would be most appreciated.

Thank you

Ray

A:Compatability, Pro-Engineer Wildfire 4 student edition

Have you tried running all of the exes in the program folder in Windows 7 Compatibility mode, as well as the main program itself?

You may need to check on the programs website for compatibility.

Ah, that's Pro-E, which has always been a huge pain to install. Wildfire is too old, you are lucky to have been able to run in in Windows 7. You might have to update to Creo.

It may be incompatible with any 64 bit OS too.

Read other 1 answers
RELEVANCY SCORE 41.2

http://www.infoworld.com/d/security-centra...ecurity_centralJuly 09, 2010By Gregg Keizer | ComputerworldMicrosoft said it will deliver four security updates next week to patch five vulnerabilities in Windows and Office, including the bug that a Google researcher took public a month ago.As expected, the slate for next Tuesday is relatively short: Microsoft has been shipping alternating large and small batches of fixes, with the larger updates landing in even-numbered months. In June, for example, the company issued 10 bulletins that patched a record-tying 34 vulnerabilities. May's collection, meanwhile, amounted to just two bulletins that fixed two flaws."This month is light, and would have been even lighter if Tavis hadn't forced them to move faster than their norm [to patch his vulnerability]," said Wolfgang Kandek, the chief technology officer of Qualys.snipWhile some security researchers criticized Ormandy for taking the bug public, others rose to his defense, blasting both Microsoft and the press -- including Computerworld -- for linking Ormandy to his employer, Google.Last week, a group of anonymous researchers who called themselves the Microsoft-Spurned Researcher Collective (MSRC) -- a play on the acronym used by the Microsoft team bug-investigation team -- retaliated by releasing information about an unpatched vulnerability in Windows Vista and Server 2008. The group published its bug report because of what it said was Microsoft's "hostility... Read more

A:Micro$oft to patch Google engineer's zero-day next week

I like the idea that a group of security people are posting security threats in windows and getting M/S off there dead bass and verify the concerns and get the fixes out sooner.

Read other 4 answers
RELEVANCY SCORE 41.2

So this will be round 3-4 for this.... too many children and PCs at home with only me as tech support!

A:Next Round for an older mech engineer vs malware.

Hi and Welcome!!   
 
My name is Jeff. I would be more than happy to take a look at your malware results logs and help you with solving any malware problems you might have. Logs can take a while to research, so please be patient and know that I am working hard to get you a clean and functional system back in your hands. I'd be grateful if you would note the following:
The fixes are specific to your problem and should only be used for the issues on this machine.
It's often worth reading through these instructions and printing them for ease of reference.
If you don't know or understand something, please don't hesitate to say or ask!! It's better to be sure and safe than sorry.
Please reply to this thread. Do not start a new topic.
If you happen to have a flash drive/thumb drive please have that ready in the event that we need to use it.
Please be sure to subscribe to the topic if you have not already done so.
IMPORTANT NOTE : Please do not delete, download or install anything unless instructed to do so.DO NOT use any TOOLS such as Combofix or HijackThis fixes without supervision. Doing so could make your system inoperable and could require a full reinstall of your operating system and losing all your programs and data.
 
Having said that....     Let's get going!!  
----------
 Could you tell me a little bit about the problems that you are experiencing with your computer?  
 
Are you having any malware related problems??  

Read other 3 answers
RELEVANCY SCORE 41.2

SHOCKING Interview with NVIDIA Engineer about the GTX 970 fiasco

A:SHOCKING Interview with NVIDIA Engineer about the GTX 970 fiasco

I wonder if this explains some of the problems over in the BSOD Forum??






Quote:
Upcoming driver could improve GTX 970's memory performance

Nvidia really stepped in a pile of PR poo when it was discovered that there was an internal communication gaffe over the way the GeForce GTX 970 handles its 4GB of onboard memory and the resulting specs.
Source: Nvidia Will Help Disgruntled GTX 970 Owners Get a Refund, Says a Driver Update is Coming | Maximum PC

Read other 6 answers
RELEVANCY SCORE 41.2

Hi,

I am a computer technician for a small Engineering company with a networking job dumped on me. =) Our propietary software application runs in a small island network without Internet access. The network usually consists of a network switch of 5 to 10 computers using static IP addresses between 192.168.0.1 to 192.168.0.10, Win2K and Service Pack 4. That's my HAPPY little network! One particular customer INSISTS on Internet access. He plugs his laptop into the network switch and gains Internet access. His IP settings:

Ip 10.0.0.52
subnet 255.255.0.0
subnet 10.0.0.1

1. Am I correct to assume that he has also connected a network cable from the network switch to his Intranet because he is able to connect to the Internet?

2. If my assumption is correct, is it a good idea to place a firewall between the network switch and his Intranet to ONLY allow inbound and outbound web traffic (http) through the firewall?

3. Do I have enough information just from the laptop IP settings to configure the firewall? What other information do I need?

Basically, I just want to protect my happy little network. =) I would appreciate any advice on how to configure the firewall and or other questions I need to address. Many thanks!

network novice,
nybble
 

A:need network advice for my happy little network, please.

Hi, I would think he would be using a network patch cable, yes, but the switch must have Internet service of some sort--cable, DSL or dialup....for him to gain access to the Net. Isn't there some kind of modem there too/
He could be using a phone line but would be dialing into his own account if you don't have any dialup accounts active. (If he has your credit card, maybe you do have an account )
The only way he could connect without a cable is by wireless access point.
If he has XP on the laptop, that has a built in firewall> up to XP SP1, that is a oneway firewall to protect the pc but not protecting output from the pc. You would have to find out if they even have the ICF running, it can be turned off.
XP SP2, which is available now, should help with that.
From what I understand tho, it can stil be turned off.
 

Read other 2 answers
RELEVANCY SCORE 40.4

Pass Google Professional-Data-Engineer Exam In First Attempt:
We are offering study material to individuals, which will enable you to successfully achieve Professional-Data-Engineer Google Cloud Data Engineer Professional exam. The Professional-Data-Engineer Google Cloud Certified certification exam offers a better
job prospect and career path to move ahead. Our Google Professional-Data-Engineer exam questions preparation material is accessible in two formats PDF and Practice exam test. CertificationsBuzz offers you free exams updates for 90 exclusive days, at discount
rates.
Get the complete Google Professional-Data-Engineer Question Answers PDF & Start preparation:- Professional-Data-Engineer Exam Questions 2019.
Youtube Link:
https://youtu.be/cSHb-rJxj0Y

Read other answers
RELEVANCY SCORE 40

Hi all. I am looking for some advice. The situation is as follows.

I need to network a small office, in which 8 of the 9 machines are running Windows ME, and the 9th is running XP.

What I really could do with some help with is:

1) What Machine to setup first
2) Whether to create a disk once the first machine is done, etc.
3) Whether to create a domain and have everyone logon
4) What client to use to create the network, etc.

Also any help with setting up file sharing and printing so that everyone has access to everything on all machine.

I have currently successfully set up 4 of the machines so that they work as they should. However I am having a problem on 3 machines whereby I can not access the entire network or anyone elses machines with them. Also the XP machine is showing all the other machines in the network, but is unable to access any of them.

Basically I need to start fresh and want to know the best way to go about it.

Many thanks.

 

A:Network Advice

Read other 9 answers
RELEVANCY SCORE 40

I'm hoping someone here can give me some advice on managing my network. I work from home and until recently, I was the only one using it so I simply used a strong password and had no issues. I have a 2 story home and I am helping my sister and her 2 kids out until she gets back on her feet. I am letting them live on the upper level for very reasonable rent. I also share my internet connection with them and there are times were they kids eat up too much of the bandwidth leaving me with a slow connection. I also asked my sister what type of parental controls she has set up on the devices the kids use and she had no idea what I was talking about. I have a TP Link Archer C20i router and the parental controls are limited to on and off times per device.
What I am hoping to do is....
1. Limit there bandwidth
2. Monitor who is on the network and what they are accessing and be able to boot them at will.
3. Set up router level parental control banning the kids and their friends from sites labeled RTA.

I am sure my routers firmware can't do all this so I am open to third party software and or different or additional routers. I admit my knowledge and experience is limited and I may not use the correct terminology so you may have to dumb it down for me a bit.

Any advice will be greatly appreciated.
 

A:Network advice

Read other 7 answers
RELEVANCY SCORE 40

What is the best way to connect 2 networked PC's to the internet using only 1 ISP one on one machine? My intent is to use a 486 for a firewall and server, while my PII sits back on the network and accesses the internet from there. This does two things, free up resources on my main PC, as well as provide a machine to test programs on that I am not sure whether they could have a virus or not? So far, I have not gotten the second machine to access the internet over the network? Do I need a proxy server, if so, are there any good free ones.?

------------------
My Website
[email protected]
 

A:{Advice Given} - Network & 1 ISP

Yes, you will need a proxy server. If you are running win98 2nd edition you have one built in to the op sys. Go into the control panel and then into add/remove programs and into the windows setup and look under Internet Tools. You will find the internet sharing tool. It is a flaky little thing but it is the only free one I can think of off the top of my head. If anyone else knows of good free ones I would love to hear!!
 

Read other 2 answers
RELEVANCY SCORE 40

I am trying to install my old modem speedtouch 330.

When installing my drivers I am met with a decision

PPPoe 0-35 LLC
PPPoe 8-35 LLC
PPPoa 0-35 VCMUX
PPPoa 8-35 VCMUX
PPPoa 8-48 VCMUX
PPPoa 0-38 VCMUX

I tried to look at up on the internet but the info is inconsistent, people write totally different things and its stupid. However I get the idea its to do with your location, I'm in the UK if that helps. Which should I pick?

I emailed my Internet provider about my bad connection and one reason they said was because I might be using phone extension cords, which I am. I am at my parents house etc and they set it up, not my mistake

At my flat I simply have network cables, however when on the net looking for some I found RJ11 (ADSL) Cable, would that be good for my broadband connection (I play online games with it) or not? if not can you suggest a cheap solution please (not wireless please).
 

A:Network advice

Contact your ISP again. Find out if you have Point to Point over Ethernet (PPPoE) or Point to Point over ATM (PPPoA).

Since there are very different installation procedures depending on your modem's version and the operating system, the rest depends on what you have. There are new drivers for version 1.4 and for Vista.

It all depends on what you have. Be aware that the modem will not appear under network settings but under dial-up.

Courtney
 

Read other 3 answers
RELEVANCY SCORE 40

Hi everyone,

We're going to putting a new computer our my middle floor of the house. The computer right now is in the basement. First question is whether we should use wireless or not, it is possible to connect the two computers with a wire but it would haveta be like 30feet long. Also, is there a way to make it so no matter what computer u are on, you can always access your files in your name. For example, If i have my ID on this computer, can i get into those files from the new networked computer???
Also, are there any types of routers that i would need to make sure the broadband is shared aslong as the printer/scanner???
I kno this is loooooooooooooong, but thanks for any help!!!!!
 

A:Network Advice

Read other 12 answers