Over 1 million tech questions and answers.

Ethernet Yes, Wireless No?

Q: Ethernet Yes, Wireless No?

Hi there,
I'm having troubles with our new router. I can connect via ethernet but not through wireless. I'm certain it's an issue with my laptop, as I've managed to connect several other devices without any problems. Any help would be appreciated as I've tried everything I can think of.

Below is the result of "ipconfig /all" with the ethernet cable connected.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\WYN>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : WYN-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : dlink.com

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : dlink.com
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Adapter

Physical Address. . . . . . . . . : 00-21-63-CD-F0-BD
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d91f:81b7:31ff:4ac1%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 01 August 2012 10:36:26
Lease Expires . . . . . . . . . . : 02 August 2012 10:42:13
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 201335139
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-6B-C7-BB-00-1E-33-8E-4A-65

DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : dlink.com
Description . . . . . . . . . . . : Realtek RTL8102E Family PCI-E Fast Ethern
et NIC (NDIS 6.0)
Physical Address. . . . . . . . . : 00-1E-33-8E-4A-65
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::38ce:bbea:a97d:feab%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.5(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 01 August 2012 09:58:27
Lease Expires . . . . . . . . . . : 02 August 2012 10:38:57
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 167779891
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-6B-C7-BB-00-1E-33-8E-4A-65

DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 6:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.Belkin
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 11:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\Users\WYN>
And below, with it disconnected.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\WYN>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : WYN-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : dlink.com

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : dlink.com
Description . . . . . . . . . . . : Atheros AR5007EG Wireless Network Adapter

Physical Address. . . . . . . . . : 00-21-63-CD-F0-BD
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d91f:81b7:31ff:4ac1%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 01 August 2012 10:36:26
Lease Expires . . . . . . . . . . : 02 August 2012 10:42:13
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 201335139
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-6B-C7-BB-00-1E-33-8E-4A-65

DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : dlink.com
Description . . . . . . . . . . . : Realtek RTL8102E Family PCI-E Fast Ethern
et NIC (NDIS 6.0)
Physical Address. . . . . . . . . : 00-1E-33-8E-4A-65
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 6:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.Belkin
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 11:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\Users\WYN>
I hope this is enough information.

Thanks in advance,
ThatGuy.

RELEVANCY SCORE 200
Preferred Solution: Ethernet Yes, Wireless No?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Ethernet Yes, Wireless No?

------------------------------------------------------------------------
Atheros Wireless Adapter - AR5007EG & AR5007
Over the last couple of years we have been seeing a lot of problems with the above adapters, mainly concerning WPA and WPA2 encryption and mainly on windows Vista.
We have seen just a couple of issues on other windows operating system, windows XP and windows 7.

Windows XP:- A driver update has resolved the issue
Windows 7 :- No conclusive results for a fix

The wireless adapter gets an IP configuration, and shows as connected, but communication is non-existent or sporadic.

Log into the Router and disable the wireless security and see if you are now able to connect to the internet and surf OK.
Please post back a reply here, and let us know if that works or does not work.
If you post back the make and exact model of the router - we can advise how to disable the wireless security

Here are a number of possible solutions

--- 1) In Device Manager right click on the wireless adapter and "update driver."

--- 2) Download and install the latest wireless driver from your laptop manufacturer's web site support section,

If you post a reply here with the Make and EXACT model of your PC, along with the windows version you are running. we will see if we can find a link to the driver and will post a reply with the link here.

--- 3) On one occasion re-setting the router back to factory default and re-configuring the router settings has resolved the issue

--- 4) The majority of members, have now used the drivers from the atheros driver site, which has resolved the issue.
- see below for direct links for windows vista and the link for all Atheros adapters and supported operating systems
AR5007
Vista 32 / 64 Bit
Direct link Drivers for Atheros AR5007 and Windows Vista 32 / 64 bit
You only need to click on the green download button labelled " Click to Download " and wait, the file will download - you do not need to click on any other buttons to get the download started
AR5007EG
Vista 32 / 64 Bit
Direct link Drivers for Atheros AR5007EG and Windows Vista 32 / 64 bit
You only need to click on the green download button labelled " Click to Download " and wait, the file will download - you do not need to click on any other buttons to get the download started
Drivers for the other windows operating system
http://www.atheros.cz/atheros-wireless-drivers.php
You need to look down the page for your particular adapter model and then look across the columns to find your windows version.
Now click on the blue tick mark in the column under your windows version.
This will open another page for that particular adapter and that windows version.

Now click on the download button labelled " Click to Download " and wait, the file will download - you do not need to click on any other buttons to get the download started

Assuming that after all the above the wireless still does not connect to the internet, all I can suggest is to use wireless security of WEP or to get an external USB wireless card.

Please post a reply here , and keep us informed of the situation and how you finally resolved the issue.
------------------------------------------------------------------------

Read other 3 answers
RELEVANCY SCORE 47.2

Are you guys aware of a single pci card that offers the typical ethernet connection as well as a wireless one? I'd like to have the option to connect to either and I don't want to get two seperate cards. Any info is appreciated, Thanks
 

A:10/100 Ethernet/Wireless Ethernet PCI combo

I don't think you can do that but I would go wireless. :bounce:
 

Read other 1 answers
RELEVANCY SCORE 46.4

Hi, I currently connect to the internet through a wired ethernet port in the wall which connects to my university's network.

I want to make this wireless since I bought a new macbook and was wondering if this product would do it? http://www.amazon.co.uk/dp/B006PYGWG6

I don't know much about it but I was concerned because the Router Mode says 'cable connection only' and I'm not sure the connection is cable (is it ADSL?). Will I need anything else like a modem?

Any advice?
 

A:Making an ethernet university connection wireless with TP-LINK Wireless Travel Router

Read other 6 answers
RELEVANCY SCORE 41.6

hi, i am using a wireless connection but to play bf2142 well i need a wired connection. i have got an ethernet wire going from the wireless router to computer, and it works [i disable the wireless connection and i connect to the web through the wire]. but i want to use my ethernet wire as my PRIMARY way to connect to the internet, but still want the wireless connection active for my computers upstairs to connect to the web.

does this make sense?

is this possible?

thank you

denny
 

A:using ethernet instead of wireless???

Read other 15 answers
RELEVANCY SCORE 41.6

So my wireless works well and fine, but the only problem is is that it disconnects time from time and i'm trying to download a 15 gb file that has no resuming capabilities. I want to use my ethernet connection rather than my wireless, but the ethernet (local area connection) isn't showing when I go to Control Panel/Network and Sharing Center/Manage Network Connections. I only see Wireless Network Connection. I have a router and a modem. the router is a linksys cisco. And my cable modem is linksys wrt45 or something. How can I fix this? My other two computers are using the ethernet cables fine.

A:Wireless but no ethernet

Download and run VistaForums SysInfo Tool (Select All and export to a file) on the laptop you're having trouble with, and upload it.

Ed

Read other 4 answers
RELEVANCY SCORE 41.6

I've just moved into my Halls at uni in London. We have to use a CAT 5E ethernet cable to connect to a socket in the wall. When we open a web browser we have to enter a username and password to be able to go online. I was wondering if there is any bit of Hardware which i could plug into the ethernet wall socket which would then broadcast that ethernet connection as wireless and if so if it is possible to protect the connection so others cant use the WIFI.

thanks
 

A:Ethernet to Wireless, is this possible?

When we open a web browser we have to enter a username and password to be able to go online.Click to expand...

That probably means that they want to restrict usage to one computer per connection and do not want wireless networks set up. So, please check with the IT department before doing anything, as it's not very hard for them to detect violations.

On the assumption that you will not attempt this unless it falls within the rules, you can use a Wireless Access Point (WAP). Use encryption, preferably WPA2-PSK, AES, but at least WPA-PSK, TKIP. Use a passphrase that cannot be guessed and does not include dictionary words.
 

Read other 1 answers
RELEVANCY SCORE 41.6

should I enable the wireless when I want to use the ethernet, my wireless works fine, but when I try to connect with ethernet, either no connection or connection drops after a short time, It is a dell desktop with windows xp,with netgear switch, and comcast modem,with mac airport, I need to get my ethernet high speed working that I pay for. PLEASE someone help
 

A:ethernet and wireless together

If I am going to use ethernet for an extended time I remove an external wireless adapter or switch an integrated wireless off. But that's to extend the life of the unused component and to save the battery if on battery. If you are using a PCI wireless card with the desktop then disabling it is probably the best you can do. But that is not going to impact your ethernet usage, so it is really your choice.

Please show the following for when you have an ethernet connection and for when it has dropped ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 3 answers
RELEVANCY SCORE 41.6

Is there such a thing as a 5 Ghz Ethernet card, or is just 5 Ghz wireless?

A:Ethernet vs. wireless

No - 2.4/5 GHZ refer to the wireless frequency.

Ethernet comes in two speeds mostly - older 100 Mb/s (100 megabits) or more modern 1000 Mb/s (1 Gigabit). Of course, these are usually much faster than internet speeds even for slower 100 Mb/s unless you have amazingly fast broadband.

Read other 1 answers
RELEVANCY SCORE 41.6

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics, -1988 Mb
Hard Drives: C: 465 GB (273 GB Free); E: 5 GB (0 GB Free); F: 143 GB (0 GB Free);
Motherboard: MSI, H67MA-E35 (MS-7680)
Antivirus: Avira Antivirus

I used to access my home wireless with a Netgear N150 Wireless USB adapter. The device still works, because I use it for Roku, but my computer can't access the wireless network with it. As a replacement I installed a TP-Link 300Mbps Wireless N PCI adapter (TL-WN851ND). That hasn't worked from the start. During the course of trying to fix the problem, I changed at least 10 different settings, and none of them worked. Now, I've lost track of all the changes I made. What I want is to erase all of the previous settings and connections and act like my computer is fresh out of the box and has never been connected to the internet before. The TP-Link is what I want to use. Not knowing as much as everyone else on here about computers, I am assuming that the Netgear and TP-Link aren't the problems, and it is instead something with my computer. Is there some type of checklist I can go though step by step to see exactly what the problem is? I don't know if there is physically something wrong with my computer that I can fix by buying a... Read more

Read other answers
RELEVANCY SCORE 41.6

So I just bought myself a new laptop (hp dv6910us) and I'm enjoying it thoroughly but I have a very basic question about what to use in terms of internet. In my apartment, I can easily connect to the internet through my ethernet connection or through the wireless. Both are smooth, fast connections. In terms of increasing the lifespan and battery-life of the computer, should I stick primarily to connecting through the ethernet or through my wireless connection? I have an Atheros AR5007 802.11 b/g WiFi adaptor and my processor is an AMD Turion X-2 TL-60 2Ghz with 3.00GB RAM. Running windows vista 32 Bit. It's a general question, not a pressing issue so answer at your leisure. Thanks.
 

A:Wireless vs. Ethernet

Not sure if anyone has ever bench marked something like that. But my gut feeling is that the wireless would draw a little bit more power but I have no evidence to back that up.
 

Read other 3 answers
RELEVANCY SCORE 41.6

I'm having problems connecting my PC via ethernet cord to the internet. We just got cable today and one of our PCs has a wireless card, when the other one doesn't. My computer is the basic one with the specs in my profile. It only has a dialup modem. I don't know if I have to configure something to the router or modem, but when my computer is hooked up to the router(the internet still doesn't work then) all other computers on the network won't connect to the internet.

Any help will be appreciated!
 

A:Pc not getting wireless through ethernet

Read other 16 answers
RELEVANCY SCORE 41.6

I have a Linksys BEFW11S4 4 port wireless broadband router with 2 x wireless laptops that can see each other and share files fine. I also have a PC which is hardwired to the router. All 3 machines have an IP address from the range I configured and all 3 machines can access the internet. The problem I'm having is that my hardwired PC cannot see the workgroup I have set up so therefore it can't see the 2 wireless laptops. The 2 wireless laptops can see the hardwired PC but cannot connect to it to view the shared folders.

I have switched all firewalls off, changed lots of config in the router, reset it to default, rebuilt my hardwired PC, pulled out some hair, changed network settings all over the place but just cannot get the hardwired PC to see the workgroup.

Any suggestions anyone ! !
 

A:! ! ! ! ! Ethernet Can't See Wireless ! ! ! ! !

Well, as long as all three are getting DHCP addresses from the same network, then the router isn't to blame, so, get it configured and leave it alone.

You say you've setup a workgroup for the laptops. That desktop machine also needs to be a part of that same workgroup. Then, you need to have the same username and password combination on the three machines, and then the desktop should be able to share files with the laptops.

And you definitely want the firewalls disabled until you get things working.

-Scott
 

Read other 1 answers
RELEVANCY SCORE 41.6

Hey all im new here, and this is my first post.
First of all I have a DSL connection through my provider. I then have a NetGear FM114P wireless firewall/print server (router ) attached to the modem.

My computer is currently hardwired through the ethernet port in the FM114P router with two other computers connecting by WiFi.

What i was thinking, was loosing the ethernet cord and turning this computer in to a wireless connection like the other two, but if i do will i loose speed? This computer currently gets between 700-950 kbps., depending on traffic.

thanks
mausie
AKA foufymaus
 

A:Ethernet -vs- Wireless

Read other 9 answers
RELEVANCY SCORE 41.6

Here's something that is causing massive loss of hair.....

My PC is connected to my router with a wireless card. I also connect my PS2 to my PC using an ethernet connection (the ps2 is "modified" and I use this connection to play music and video thru the ps2 to the TV).

Everything works fine with one exception. It seems like the wireless is not getting a DNS. To obtain one, I have to disable the ethernet card, connect to my AP, then enable the card. If I lose my connect with the AP (which happens sometimes, it's on the other side of the house and the signal is a little weak), then when it reconnects I have to do the whole disable/enable thing.

It's not a huge deal, but I do like my stuff to work properly and usually things like this are not problem for me, but this one really has me wondering. Anyone have any ideas?

Here's my ipconfig /all if that helps. What's odd is the ipconfig is *exactly* the same when I can connect and when I can't. So maybe it's not a DNS issue, but something else. But I am unable to connect to any web sites until I disable and re-enable the ethernet card.

Windows IP Configuration

Host Name . . . . . . . . . . . . : HAL
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : domain.actdsltmp

Ethernet adapter Wireless Network Connection 3:

Connection-specific DNS Su... Read more

A:Ethernet and wireless on same PC

Read other 6 answers
RELEVANCY SCORE 41.6

A little confusion here - When I log onto my Verizon router page (that 198.xxx thing), I show many menus but the following 2 have me a little confused. One says "network connection" type is: Ethernet - I do have a yellow cable coming out of my Actiontec router to the pc so I get that. Another menu says "wireless settings" and this says "wireless" which I have set to WPA and the mode is 802.11g "only". Is this system wireless or ethernet or both? I would like to do the pc to tv connection for netflix movies at some point.. Am I all set with this configuration? (knowing I have to buy a box of some sort, Roku or Apple or something) and if I do have a wireless connection, can I connect the two without cables running from one to another? Hope that is all clear. Thanks in advance.
 

A:Ethernet or wireless?

Is this system wireless or ethernet or bothClick to expand...

both

you have a wireless router - and so you can connect to the router with a cable as you currenty are doing and other devices PCs etc or your PC can also connect with wireless
I would like to do the pc to tv connection for netflix movies at some point..Click to expand...

someone else will need to answer the netflix service

from what I can see on the website
http://www.netflix.com/HowItWorks#faq1
you can watch via a PC


http://www.netflix.com/HowItWorks#faq1
Can I also watch instantly on my PC or Mac?

Yes. Simply press Play on any TV episode or movie to instantly watch it online on your Internet-connected PC or Mac.Click to expand...

so you can watch directly on your PC without any other device - and then if you have your PC video output connected to the TV you should be able to watch on TV via PC

whats the make and model of TV
- what outputs do you have on the PC video card ?
- what inputs do you have on the TV

if you have HDMI on both - then you should be able to use that - although for some copyright materials you will only be able to display on the TV and not two monitors
 

Read other 3 answers
RELEVANCY SCORE 41.6

Hi, I have a Pavillion dv7-1129 wm laptop. With Windows Vista Home Premium ... Amd Turion (tm) X2 dual-core moble Rm-72 2.10 GHZ...Ram-2814... 32-bit Operating sytem
Can anyone provide me with the drivers for the Wireless and Ethernet connections

Drives for a Realtek RTL8101 Family-PCI -E Fast Ethernet NIC (NDIS 6.0)

Thankyou
 

A:Ethernet and wireless

Read other 12 answers
RELEVANCY SCORE 41.6

Hello,

I have a PC with wireless connection to the Internet (PCI wireless card). Is it somehow possible to use the Ethernet port (NIC) to PROVIDE network access to a device? (such as a D-Link internet camera with ethernet connection).

Thanks for your help!

Johnathon
 

A:One wireless, one Ethernet, can I use both?

Read other 11 answers
RELEVANCY SCORE 41.6

Hi everyone

I dont really know whether this is really relevent, but I was just wondering. If I have both ethernet cable and wireless on one computer as 2 networks. Can I join up both of them to increase my internet speed or somthing. I tested both of them seperately and the ethernet cable was much faster than the wireless. My router is next to my computer. Can I have some tips. I will be putting some screenshots later.

Thanks in advance

A:What can you do with both ethernet and wireless??

  
Quote: Originally Posted by mw2


I tested both of them seperately and the ethernet cable was much faster than the wireless.


Surprise, surprise...

Read other 9 answers
RELEVANCY SCORE 41.6

Hi

My W8 PC is connected to the Wireless Router by Ethernet Cable, the PC also
has Wireless connectivity; is it possible to connect to the Router with both at t
he same time and if I do will that improve internet speed?

Thanks

Daniel

A:Ethernet and Wireless

Your internet speed is determined by your provider and the package you have, it is irrelevant how fast your connection to router is as long as it is at least a little faster than speed to the provider. So you can not change the internet speed above what provider gives you.

Read other 2 answers
RELEVANCY SCORE 41.6

This is, perhaps, an extremely silly question, easy to answer as the Techguy says! I have been using a desktop with Ethernet LAN (Landline) for years. Now, I have a Dell Studio 15 Laptop with Wireless output signal. My question is, How do I connect the two, so that I can use the Laptop too through my land-line broadband connection? Do I use just a wireless router in between? Any type of Wireless Router, or, any specific type? Do I need to change anything in my desktop LAN setup?
 

A:Wireless to Ethernet LAN

Read other 6 answers
RELEVANCY SCORE 41.2

I have a cable modem hooked up to my router, and the ethernet cable from my router to my computer. internet and wireless were working just fine for about a month up until yesterday. it just stopped. now, either my ethernet will connect or my modem, but never both, which will not allow me to have wireless. i've tried resetting both the router and modem, but no luck. any help is appreciated. thanks
 

A:wireless and ethernet problem

Read other 7 answers
RELEVANCY SCORE 41.2

My old Westell DSL modem died, and Verizon sent me an Actiontec model GT704WG. I have two desktops, both connected to the modem by ethernet cable, and a laptop, which uses the wireless capability of the modem. This worked fine with the old modem (until it died). I connected the cables to the new modem exactly as they were connected to the old modem. I'm now browsing happily on the laptop (i.e., wirelessly), but the desktops cannot connect to the Internet. Strangely, when I go to 192.168.1.1 on one of the desktops, I get the setup page for the old modem rather than for the new one, even though the old modem is now sitting in a box. The status of the lights on the modem is as follows:

power - green
DSL - green
Internet - green
ethernet - not lit (all four of them)
USB - not lit
wireless - green

All computers are running Windows XP, SP-2.

How could wireless be working, but not ethernet? Usually it's the other way around!

Do I, perhaps, have to connect the modem to one of the desktops by USB cable? My understanding is that it's not necessary. If it is, do I need a driver from Verizon? They did not send a CD with the new modem. Is the driver available on the Internet somewhere?

Thank you!!
 

A:Solved: wireless OK, but no ethernet

ethernet - not lit (all four of them)Click to expand...

I take that to mean the ethernet ports are bad (have you tried them all?) or the cables are bad.

This may be the correct user manual: http://business.verizon.net/Help/dsl/Default.aspx?case=c13947

Try the USB port unless your computers are:

"Note: USB LAN port is not supported with Microsoft Windows
NT 4.0, Windows Vista 64-bit, or Mac OS."

That unit is a modem/router combo. The USB port is not to the modem part; it is a special LAN port, so no driver or special software should be needed.
 

Read other 3 answers
RELEVANCY SCORE 41.2

Hello I have been having a problem with my ethernet work but wireless not. It basically says acquiring IP address then says limited connectivity. Im using a Dell Vostro 1520 laptop and a dlink router. Thanks for your help.
 

A:Ethernet works but wireless does not

Check.
You have no conflicting wireless managers installed try using only the Windows built in tool
Remove any unneeded wireless networks from your system.
Remove and re add your network back in, ensure all settings are configured correctly. Connect firstly with the cable and note down everything exactly. i.e. SSID, Security type, encryption type, security key.
If it still dosent work look into updating or rolling back the drivers for your wireless card.
 

Read other 1 answers
RELEVANCY SCORE 41.2

hey,

I am trying to use my wireless router to convert my wired connection to wifi. i have two laptops in which i would like to use the wireless connection. Only router and one laptop have ISP mac registration. I would like to use my router as a bridge to conect to internet and then to trasmit wirelessly, so that i can use internet in both the laptop remotely. Is it possible?

currently one laptop is connected to internet and that too wired connection. it is having a static ip and gate way. How can i use this static ip and gateway so that the router makes the connection and later assigns a new ip to my laptops.

if you are still not clear about the question I can give you more details

can anyone please help me in this......

A:converting ethernet to wireless

I think I can help... but your not being very clear.

As I understand it, you have a Wired Router which is connected to the Internet. You want to connect a Wireless Router and use it as a switch, to transmit the data from the wired router to 2 wireless laptops?

So it would look something like this:

Internet>Wired Router>Wireless Router>Laptops

Is that right?

Read other 5 answers
RELEVANCY SCORE 41.2

Just built a computer and trying to get a wireless card that will work with Windows x64. Any hints, tips or advice? I have purchased 2 and they did not work with x64. Please help!
 

Read other answers
RELEVANCY SCORE 41.2

Hello all-

I am at my family's vacation home. For several years we have stuck to using dial-up here, part of the whole isolation thing you know, but recently decided to upgrade to the most basic DSL. I set up the connection and connected the modem (Lynx L-220) to a wireless-b router (Linksys BEFW11S4) and everything was working great for about, oh, maybe an hour. It started getting unbearably slow, worse than dial-up. So I connected to the router with an ethernet cable and it's fine, most of the time. I then disconnected the ethernet and surfed wirelessly, and it was also fine. So the wireless only would work properly if I had just used the ethernet. ?????????? That's odd.......

I tried pinging a few sites on ethernet and wireless to see what happened. I opened Firefox, tried loading a page (of course it wouldn't) and then typed ping www.google.com in command prompt. It timed out a few times, then get a reply and, low and behold, the page suddenly started loading. Now I'm really confused. The internet works sometimes, the wireless works sometimes, and the ethernet works sometimes. ?????

I'm certainly planning to call tech support, but as that is a big thing to attempt, I thought I'd post here first and see if there is anyone out there who perhaps can help me.

OMG OMG OMG

Edit: I have tried pinging and loading pages only connected to the modem as well. It still doesn't work properly. I guess it's not the routers problem, maybe ... Read more

A:Wireless fast only after using ethernet...

Read other 16 answers
RELEVANCY SCORE 41.2

I recently purchased an HP Pavillion Elite 441F computer. Upon starting it up, I discovered that although my wireless connection works perfectly, I cannot connect via an ethernet cable. I have tried multiple ethernet cables that I verified the connectivity of using my laptop. When I plug in an ethernet cable, the port shows a green light and an orange light below it. My computer recognizes that an ethernet cord has been plugged in, but shows the over the eternet box on the taskbar. All drivers are up-to-date.

Thoughts? I appreciate any help offered.
 

A:Wireless fine, Ethernet not so much...

Read other 9 answers
RELEVANCY SCORE 41.2

i have a computer that is connected to a domain.
i want to connect it with an usb wireless adapter.
the problem his that if i use the adapter i can't acess the domain because it's two different networks.

i'm working on windows 7 ultimate 32 bit
is there a way to work with both networks connected?

my computer is HP DX2300

and this is the specs:
GE115EA HP dx2300 MT PD-925 2x3.0GHz 2x2MB HT,1GB DDR2,160GB,DVD+/-RW,FastEth,WinVistaBusiness32

thanks!

A:can Wireless lan and ethernet Lan co exist?

I dont think it'll work but if anything, make sure your IP address on each network is different.

Read other 9 answers
RELEVANCY SCORE 41.2

Just a simple question. My apartment complex has installed wireless ethernet. My desktop computer has a 10/100 ethernet card installed, but I suppose I need to purchase a wireless card. What am I looking at as far as installation? Does it slide into a slot, or would somebody who's never opened his chassis before be better of getting pro help?
 

A:Wireless Ethernet Card

The ones I have seen advertized just plug into the ethernet jack on the back of the computer....I dont have one but my best guess is check with the manager of the apartment complex to ensure you get one that matches their frequency.
 

Read other 3 answers
RELEVANCY SCORE 41.2

This seems to be a common problem but after trying all that is out there (repairing and reseting TCP/IP Winsock, random You-Tube videos) I'm stumped. Here is my info from my cmd's IP config when I'm online and when I'm offline listed after that.

*ONLINE*

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Lisa
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8071 PCI-E Gigabit Ether
net Controller
Physical Address. . . . . . . . . : 00-1D-72-3D-89-61
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::48a5:e32d:4169:1d0c%12(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.84(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, July 24, 2011 10:55:52 PM
Lease Expires . . . . . . . . . . : Monday, July 25, 2011 10:55:52 PM
Default Gateway . . . . . . . . . : 10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 268442994
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-0F-F2-AF-24-00-1D-72-3D-89-61

DNS Servers . . ... Read more

A:connect to ethernet not wireless

Read other 7 answers
RELEVANCY SCORE 41.2

Hi.
im currently in rented accomodation and the internet is via a wired ethernet cable. i am not admin on the network. but im interested in a quick way to make a small wireless network using the ethernet so i can use wi-fi in my room.

looking for a cheap, simple option.
i have a bt voyager router available to me if that helps?
but i assume there's a small device you can buy that will transmit a short range wireless signal and work as the exchange between me and the network.

thanks!
 

A:Ethernet to Wireless - non admin

Read other 11 answers
RELEVANCY SCORE 41.2

netgear n300 wireless
wnr 2000 v4

Ethernet cable connections are ok
The computers that connect wirelessly have to be restarted often to regain connection.
 

A:ethernet/wireless router

from one of the computers - can we see an xirrus screen shot please

------------------------------------------------------------------------
Run Xirrus Wi-Fi Inspector
Download and install
If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
( the site now appears to require a business email, and does not allow webbased emails like gmail,hotmail or yahoo etc )

Use the links below

http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html
http://www.softpedia.com/progDownload/Xirrus-Wi-Fi-Monitor-Download-99109.html

Then run and install the program - on a wireless enabled PC/Laptop
if you get an error - You will need to have NET Framework installed for the WiFi Inspector to function.
On windows 8 - (i do not have windows 8) but, it would appear that, When you first try to run, you may get a message that .net framework is needed, and included in that message is a link to download/install.

Run the program

A user... Read more

Read other 2 answers
RELEVANCY SCORE 41.2

Im sure this is something really simple but basically with my laptop i can connect to my router wirelessly fine but when connected via an ethernet cable web pages dont load although everything states its connected???
When you attempt to load a page the load bar starts to work in the bottom right hand corner to indicate its loading but doesnt go any further than halfway and never loads?
My security programme is ESET and have attempted disabling the personal firewall in the hope this may help but no joy.
Have tried another laptop connected up via ethernet cable and that laptop worked fine loading pages problem free??
To me this seems odd but could be relatively simple as it states connection, can be prooved to work fine on another laptop so it must be something on my laptop stopping it going any further??
Could anyone please lend some much needed advice pls? would be much appraciated
thanks
Paul
 

A:Can connect wireless but not via ethernet ?

Try these simple tests using the wired connection only with the wireless disconnected.
Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key:

NOTE: For the items below in red surrounded with < >, see comments below for the actual information content, they are value substitutions from the previous IPCONFIG command output! Do NOT type <computer_IP_address> into the command, that won't work. Also, the < and > in the text is to identify the parameters, they are also NOT used in the actual commands.

Do NOT include the <> either, they're just to identify the values for substitution.

IPCONFIG /ALL

PING <computer_IP_address>

PING <default_gateway_address>

PING <dns_servers>

PING 74.125.45.100

PING yahoo.com

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

<computer_IP_address> - The IP Address of your computer, obtained from the IPCONFIG command above. (For Vista/Win7, the IPv4 Address)

<default_gateway_address> - The IP address of the Default Gateway, obtained from the IPCONFIG command above.

<dns_servers> - The IP address of the first (or only) address for DNS Servers, obtained from the IPCONFIG command above.

If you are on a machine with no netw... Read more

Read other 1 answers
RELEVANCY SCORE 41.2

Hey everyone,
I have a Toshiba Satellite Laptop A305D-S6848
I previously had Vista on it and now I have installed XP SP2 on it...
Everything in the laptop seems pretty good...
I have installed mostly every drivers I had to install, but the wireless won't work and so doesn't the Ethernet port work...
when i connect the laptop to the router through the ethernet, it doesn't connect to the internet...
The local area connection thing is missing too in Network Connections...
Any help would really be appreciated...
Thanks...

A:Ethernet and wireless not working

and welcome to the Forum

You need to load the driversfor the LAN and wireless cards . .

Read other 10 answers
RELEVANCY SCORE 41.2

A friend brought over a computer for me to remove a virus, after checking out the computer found that the OS was hosed. So backed up data, and put a fresh istall of XP pro on the PC, legal copy not bootlegged. Couldn't get ethernet working, figured since he did have a several nasty viruses, I'd flash the BIOS, and right 0's to the drive just to make sure no nasties were still on the machine. All said and done, reinstalled XP Pro, on an Emachine T2862. Installed drivers. Installed a pci 3Com ethernet card, with the right drivers. No ethernet, cant get an IP, tried using a good static IP didn't conect to the internet, couldn't ping the router. Plugged in a Linksys wireless usb adapter, grabbed an IP right away. Tryied plugging the ethernet in, ethernets get IP's now, unplug usb and ethernet stops working. Plugged usb back in did all of the windows updates, including hardware. Tried Ethernet with the new drivers, still doesn't work. Tried Winsock fix, tried XP bat fix. Any other suggestions, I'm stuck.
 

A:New install no ethernet, but can get wireless

What patch level of XP are you using? If this is SP2, the classic WINSOCK patch is not correct.

TCP/IP stack repair options for use with Windows XP with SP2.

Start, Run, CMD to open a command prompt:

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reboot the machine.

Let's also see this:

Start, Run, CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

Read other 2 answers
RELEVANCY SCORE 41.2

When I bring my laptop home, I plug in a Cat5 cable and boot it up. Windows 7 then hooks up to my router with both the cable and via wireless. When I then transfer files from it, they transfer at the lower wireless speeds. If I disable the wireless on the laptop, the transfer speed increases to Cat5 levels.

Is there some way to get it to use the wired connection instead of the wireless connection without having to disable the wireless adapter in Device Manager (which means I have to re-enable it when I take the laptop on the road again)?

A:Wireless vs Cat5 ethernet

When the eithernet cable is plugged in it takes over the wireless connection and only the wired connection is used. In other words it should be happening automatically as soon as you plug in the cable.

Quite a few have tested this including myself so unless your system is somehow different than everyone else's I can't imagine why you would be having this problem.

Read other 7 answers
RELEVANCY SCORE 41.2

SInce I bought the HP Pavilion Notebook T1E85EA#A I have suffered from unreliable wifi. I had put this down to my router however I have replicated the issue on another connection/router. The wifi always shows as connected but the throughput seems to stop. I cant acess any web pages, cant access the router and unable to ping them command prompt as well. After a while it will suddenly start working again albeit the page loads will appear slow at times. Today I decided to try using ethernet as well however I have found this has exactly the same problem. Some of the diagnostics I have tried are as follows: Alternate connection method (ethernet)Alternate broadband connectionManually specifying tcp/ip settingsUpdating drivers (no new drivers found and the ones installed are from 2015), Tried from the HP software, windows update as well as in the device properties. Restoring windows back to factory spec but the issue continues. Is there anything else I can do to rectify the issue or should I send it back to HP?

Read other answers
RELEVANCY SCORE 41.2

Hello,

I am having real issues with both wired and wireless connections. Basically, I don?t have either all of a sudden. One day my system was fine, the next nothing. I have searched and carried out all the obvious and non-obvious ideas but have got nowhere. I have even been out and bought a new Netgear WNDA3100v2 and NIC. Everything is recognised by Windows but will not connect to the internet. Please can anyone help. I suspect and fear that it is a Windows problem and that I will have to reload the OS. (Win7 64bit)


Wired and wireless issue
ISP: Talk Talk
Connection: DSL
Modem/Router: Netgear D6300
Anti-Virus: AVG 2014
Windows IP Configuration

Host Name . . . . . . . . . . . . : rtda-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

A:No ethernet or wireless suddenly!

Any suggestions anyone?

Read other 2 answers
RELEVANCY SCORE 41.2

This problem has confounded me.

1) Bought a new wireless router (it's a Corega CG-WLBARGNH router...I live in Japan).
2) Set it up fine with another laptop. On that laptop, both ethernet and wireless work great. On my HP Pavillion dv 1000 with Intel PRO/Wireless 2200bg...ethernet connects great, but wireless will not connect. Note the following:
a) The wireless router shows up fine on my list of available connections.
b) When I click to connect to the network, my computer just endlessly tries to connect..."waiting for network" even though the router is in the same room with me and showing full strength on my list of available networks.
c) I am able to connect to other wireless connections fine (though they happen to be my neighbors' unsecured networks)
d) I have updated my driver (as well as rolled it back). I have checked security settings multiple times (the router company suggested this). I have even fiddled with settings I probably shouldn't have (with the configuration of my driver or TCP/IP settings)
e) I have tried repairing my wireless connection at which point it says "Windows cannot finish repairing the problem because the following action cannot be completed: Connecting to the wireless network". How helpful is that...

Hey, any advice at this point...I'll try it. I've been struggling for weeks in my free time to get this set up. At this point, I have no idea what to try.

Does anyone have any idea?? It must be some si... Read more

A:can connet with ethernet but not wireless

Try removing all the stored wireless profiles and searching for and connecting. The fact that it's not asking for a key indicates you may have an incorrect key stored.
 

Read other 3 answers
RELEVANCY SCORE 41.2

My Operating system crashed yesterday and I had to reinstall it, thus deleting everything off of my computer, including my configuration for wireless internet.

I installed the wireless adapter (Netgear WG111v2) like I was supposed to, I put the most up-to-date drivers for my computer to use the adapter as well as for the adapter to operate. It detects signals just fine, but when I put in my network's WPA passcode, my adapter gets stuck in this loop of "acquiring network address" and then dropping it and "acquiring network address" again. This baffles me because the code has worked on other machines.

Then, when I tried to connect my computer via ethernet cable, not only would my computer not connect to the internet, it's not even showing ethernet connection as an option in my Network Connections.

I really have no idea what to do at this point. Can anyone help me with this?
 

A:Can't connect to wireless or ethernet

Read other 8 answers
RELEVANCY SCORE 41.2

Hi all
Im not compleatly computer illeterate but basically if something goes wrong im buggered!

latest problem is that I was connect to orange broadband (live box) with numerous problems, the main one being that i could only connect using ethernet(?) after numerous phone calls they sent me to 192.168.1.1 or something to that effect and had me change a few things around and hey presto it worked.

problem is I then moved and am now trying to connect to my very unhelpful flatmates O2 wireless box ii. and am back to only being able to use a cable to connect. I tried the previous address that orange gave me but im guessing it only works for them as it wont even display the page now.

i'm pretty sure the problem isnt the O2 box as my flatmate and friends have no problems connecting and i cannot connect to any wireless networks (macdonalds WiFi included lol)

so where do i go from here?
 

A:Solved: can use ethernet but not wireless!

Read other 11 answers
RELEVANCY SCORE 41.2

Hi guys ,I am facing the weirdest problem . when I m trying to connect my laptop using wifi , my modem get rebooted ..all light gets off (DSL,WLAN,Internet) automatically . is it any malware or what ? I have updated my BIOS , my wireless driver ..but nothing worked .nd when I m connecting using ethernet its working fine , modem working smoothly .
 

A:Wireless not working, but ethernet does

Hi Sssstud,

Please let us know the message you see when you try to establish a wireless connection to the internet. Is your computer able to detect wireless networks? What version of Windows are you using and what is the model and name of the wireless router?

Thanks and regards,
Babita G
#iworkforDell


For easy access to drivers, manuals and product updates, please visit our Support Site .
 

Read other 3 answers
RELEVANCY SCORE 41.2

My ISP has supplied a Thompson Gateway router with wireless and 4 Ethernet ports. I connect to the internet from my desktop machine (Windows XP) via Ethernet.

My new Fujitsu Esprimo Mobile V6555 (Windows XP Professional) connects to the internet via wireless. I swapped to using Ethernet for a couple of days but when I wanted to use wireless again I failed. I tried lots of things but eventually did a “restore” to a date prior to the use of Ethernet and all was well again. I experimented and can now swap between the two PROVIDED I disable the wireless connection before plugging in the Ethernet cable.

I can understand the Fujitsu not being able to use both systems at the same time but was surprised that having them both connected should then disable the wireless connection requiring a “restore” to get it back. I contacted Fujitsu and got the following response:-

“You should always be aware of whether you are connected to the wired or wireless network, and use only one network connection at a time. Your laptop can also be connected to both networks simultaneously, which can cause network instability, slow connectivity or confusing the OS!”

I would like to occasionally “network” the Fujitsu to the desktop machine using a spare Ethernet port on the router. This would only be used for basic exchange of files, no sharing of printers or scanners, or opening a file from one machine in an application running on the other, just very basic file exchange.

After my initial expe... Read more

A:Mixing Ethernet and wireless.

Read other 8 answers
RELEVANCY SCORE 41.2

i have had a bad relationship with at&t i'm getting really tired of it so i had the idea of getting verison, unforunetly they don't offer any service where i live, i saw an ad for verison broadband network, that comes with a netbook. i had the idea of getting that deal, and pay $30 a month rather than $100 for this crappy At&t connection. i though that i could could uplink/bridge the broadband and ethernet internet into our houses Ethernet/wireless router. i have been working on it with my computer, this is my set up. i have my wireless pc connected to the router. i have an ethernet port on the back, witch i have connected to another wireless wrouter, were a laptop then connects to that router, i know that sometimes the router won't uplink the signal, i have a fios router that has a WLAN connection aside from the Coaxe connection. both should allow incomming connections. so give me some guidence, i'll take anything. thanks for all your help, thank you.

Bwkrazyness

Read other answers
RELEVANCY SCORE 41.2

A friend brought over a computer for me to remove a virus, after checking out the computer found that the OS was hosed. So backed up data, and put a fresh istall of XP pro on the PC, legal copy not bootlegged. Couldn't get ethernet working, figured since he did have a several nasty viruses, I'd flash the BIOS, and right 0's to the drive just to make sure no nasties were still on the machine. All said and done, reinstalled XP Pro, on an Emachine T2862. Installed drivers. Installed a pci 3Com ethernet card, with the right drivers. No ethernet, cant get an IP, tried using a good static IP didn't conect to the internet, couldn't ping the router. Plugged in a Linksys wireless usb adapter, grabbed an IP right away. Tryied plugging the ethernet in, ethernets get IP's now, unplug usb and ethernet stops working. Plugged usb back in did all of the windows updates, including hardware. Tried Ethnet with the new drivers, still doesn't work. Tried Winsock fix, tried XP bat fix. Any other suggestions, I'm stuck.
 

A:New install no ethernet, but can get wireless

Read other 11 answers
RELEVANCY SCORE 41.2

I network an XP box and a 98 box via wired Ethernet. Currently, a DSL connection is shared via a Zoom modem with a built-in router (5651_X4_2_2) connected to a Linksys switch (EtherFast 10/100 5-Port Workgroup Switch EZXS55W).

Just bought a laptop with a wireless card installed and want to share Internet connection and files wirelessly as already done via wired Ethenet (between XP box and a 98 box). Laptop features VISTA Home Premium.

Instead of connecting the Laptop to the switch via a patch cable (to share DSL and files), thought maybe there's a type of Ethernet to wireless adapter product that simply plugs into a port on the switch that would in turn transfer a wireless signal to the laptop. Or not?

Thanks in advance.
 

A:Ethernet to wireless adapter

Read other 8 answers