Over 1 million tech questions and answers.

MBR Error 1 on startup

Q: MBR Error 1 on startup

I?m having a major problem booting up my PC. I keep getting the error message ?mbr error 1 Press any key to boot from floppy? every time I reboot my PC.

The PC is running Windows 7 Professional 64-bit, and everything was working fine until I started to do some cleaning up in preparation for moving my OS from an existing HDD to a new SSD. My PC has a Gigabyte X58A-UD3r motherboard.

I cleaned up my files using Windows System Cleanup and also defragmented the C: drive. All of this seemed to go successfully. On rebooting my PC, and with the SSD installed in an external caddy connected via eSata (because I wanted to clone my existing C: drive across to it to avoid a new installation of Windows 7), I entered BIOS and changed the SATA from IDE to AHCI. (As far as I am aware I didn?t change anything else). Then I booted up the PC and got the error suggesting that there was mbr error 1 etc.

I turned off the PC and went back into BIOS and reset the SATA back to IDE, and rebooted. Same error. I tried rebooting a number of times ? no success.

I then put my Windows 7 installation disc into the DVD drive and rebooted from the DVD (after selecting the DVD drive as the boot option in the BIOS startup). It seemed to boot up right into some version of Windows (note: it did not ask me if I wanted to install or repair windows; it just came up with a standard Windows 7 wallpaper and nothing else).
I rebooted again, with the Windows 7 disc in the DVD drive, but when it asked me if I wanted to boot from DVD, I just let it run ? and it booted up my Windows as normal. But when I tried and reboot without the DVD in the drive and with the HDD boot option as the primary boot, it still gave me the mbr error.
So I booted once again with the Windows DVD, and created a Windows Repair Disc. I rebooted with this and attempted to carry out a MBR repair (using the CMD line: bootrec.exe /fixmbr ? which indicated that it ran successfully). I rebooted the PC ? still got the mbr error.

I rebooted with the repair disc again and ran: bootrec.exe /fixmbr, and bootrec.exe /fixboot, and bootrec.exe /rebuildbcd. They all seemed to run successfully ? but on reboot I still got the mbr error.
I also downloaded and rebuilt the MBR using the MBR rebuild utility on Partition Wizard Mini Tool ? it still hasn?t solved the problem.
I also tried to recover using a previous backup of my C: drive (one created yesterday before I did any clean up or defragmentation, but I am not sure if it had the MBR backed up) ? it restored OK, but didn?t solve the error.
I also ran chkdsk on my C: drive ? it suggested that the drive was clean with no errors.

So at the moment the only way I can boot up my PC is to have the Windows 7 installation disc in the DVD drive and have the DVD drive selected as the first boot device (even though I don?t subsequently press any button to boot from the DVD) ? it just seems to force it to get around the mbr error somehow.

Can anybody suggest how I can resolve this issue ( as I am pulling out what little hair I have left trying to find a solution)?

RELEVANCY SCORE 200
Preferred Solution: MBR Error 1 on startup

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: MBR Error 1 on startup

Being prompted for floppy is unusual so I would first power down, drain power by holding power button, then physically unplug any floppy drive.

If that doesn't solve the strange prompt then enter BIOS setup and remove any floppy device from all listings including boot order.

While in BIOS setup first reset to defaults: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

Next set SATA controller to AHCI. Unplug all other HD's and peripherals. Plug in on SATA HD to mobo SATA port 1.

Then boot into Win7 DVD to Clean Reinstall - Factory OEM Windows 7 which steps are the same for retail.

If this fails wipe the HD first from DVD Command Line with Diskpart Clean Command.

If these steps all fail post back any error message and exact failure point during Clean Install Windows 7

After reinstall plug back in your HD to access and copy over data and access program installers which should be stored in your Downloads file.

Read other 9 answers
RELEVANCY SCORE 39.2

so everything was fine when my laptop started to become very slow and i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.

then i researched and found out that there is some problem with the windows service pack 1 and some daemon tools driver sptd.sys is also involved or something so i uninstalled daemon tools as well as windows 7 service pack 1 from control panel .

now the system is back to its normal speed once it starts up fully , and unless i switch it off there is no problem , but when i restart the system it takes at least half an hour to start up sometimes more than that , sometimes it never starts and i see the BSOD after the welcome screen with error 0x000000f4 and the physical memory dump fails with error 0xc0000010 .

i had also found something about minidump files which i didnt understand anything about , but i still tried to find the folder but i couldnt find the minidump folder in c:/windows/ so i figured maybe i didnt have a minidump folder.

any help would be really appreciated , and if you decide to help please do so thinki... Read more

A:BSOD on startup , error 0x000000f4 . startup takes half an hour

With the required information we can give you the best possible help.
http://www.sevenforums.com/crashes-d...tructions.html

Read other 7 answers
RELEVANCY SCORE 39.2

As the title suggests, my Acer Aspire has been running startup repair for over 20 hours following a BSOD yesterday. I'm not sure if it's worth the wait so maybe you all can shed some light. Yesterday I was stressfully trying to search for something (using Chrome) and the website I was on froze; admittedly I slammed the heels of my hands down on the laptop at that point. The site unfroze after less than 30 seconds, I continued using my laptop without incident, then let it hibernate for about an hour. Started up fine after that, and at that point I was beginning to rip a DVD (one that I owned; I just wanted the files on my computer) using a program that I've used successfully in the past, but the rip failed. So I began using VLC instead, and hadn't actually started ripping any files when my laptop froze. I had been trying to point to a file path for saving but hadn't saved anything. The laptop was completely unresponsive after several minutes, so I hit the power key to restart, which is when I got the BSOD. It flashed too quickly for me to read or remember anything other than the word KERNEL. I've been wracking my brain trying to remember if it said kernel error or kernel memory error or what.

After the BSOD I had the option to start normally or in startup repair; I hit "start windows normally" but it went to repair anyway. It was on the grey screen with the cursor but I thought it had frozen again, so I did another hard restart. No BSOD this time, but again the opti... Read more

A:BSOD on startup, unknown error, startup repair running too long

Bump...how can I tell if the startup repair is working?

Read other 2 answers
RELEVANCY SCORE 39.2

My laptop hasn't been in use for about a few weeks and all of a sudden, I am getting a Windows Error Recovery on Startup. I am given two options: Launch Startup Repair (recommended) and Start Windows Normally. Nothing happens when I try to restart Windows normally -- I only see a black screen. Upon selecting System Recovery, a teal screen pops up with "System Recovery Options" telling me to select a keyboard layout. Then it tells me to select my OS, but it comes up blank, telling me to load drivers for my hard disks. I stopped right there.

I am a little hesitant about using the System Recovery in fear of losing important files. If this is a possibility, I may try to backup my files using an alternate OS, like Ubuntu. Or are my files already long gone? Is this just a restore for important Windows files or a complete restore of Windows back to factory settings?

I have not installed any new software or devices. Running Windows Vista x64.

A:Windows Startup Error - System Recovery Launch Startup Repair

Definitely try to backup your files before doing anything else.

Read other 2 answers
RELEVANCY SCORE 39.2

Hi guys I was cleaning my laptop turned it on and it just wouldn't work so I turned it off and on again and it was giving me this error code saying my keyboard is not detected in start up. It then says there was a problem and shoots me to startup repair where it's just stuck not doing anything. My mouse and keyboard don't work, but I have a wireless mouse that I can use I can't access safe mode either because my keyboard doesn't work and I don't know if I can get a keyboard hooked up since my computer might not be able to recognize it. Sorry for the badly worded paragraph it's really late and I need to go to sleep. How can I solve this problem. Also startup time is really long ( usually 20 seconds) is now 5 min an doesn't even start up some times and I have no recovery disks or anything like that so im really confused what to do
Edit: A quick update, I started my computer in the morning and was not getting error 01010003, and my computer started perfectly fine however my keyboard still isn't working. I think it might be a driver problem, but I can't access Safe Mode... because my keyboard doesn't work. Is the only way of getting the key board to work getting a new keyboard and using that to diagnose the problem through safe mode or?

A:Error 0101003 Keyboard no detected, stuck on startup/startup repair

In this situation, you have to use another keyboard in order to test. I wish you will be luckier than me .... for me it turned out to be a motherboard failure My computer was working normally .... but no USB/PS2 ports were working.

Read other 1 answers
RELEVANCY SCORE 35.6

This message now appears on an otherwise excellent computer.

Cannot connect to wireless broadband (I'm doing this on my Equium P200D)

Any ideas. I've tried the Toshiba help to no avail.

A:Qosmio E10 CFSServ Listen Error & Recv InitConnect Error appears on startup

Hi

Someone wrote in this forum that the CFSServ is part of ConfigFree utility.
Remove ConfigFree application from the system and try to use and configure your WLan again or try to use the LAN connectivity!

Check it out

Read other 1 answers
RELEVANCY SCORE 35.6

Hi to all,

Around 5 days ago, some sort of error, cropped up while installation of Kaspersky Anti Virus on my laptop, and after that everytime, I turned the system on, I faced the blue screen error.

Then, i formatted my laptop and reinstalled Windows XP. It was running fine for two days. Suddenly, it started giving error "Logonui.exe application error" at startup displaying something similar to "The instruction at '0x0037149c' referenced memory" something.. It had to buttons - Cancel (for debugging) and Ok.. I pressed cancel/ok/close button. It always cropped up. Until after a series of pressing buttons, my log on screen came. After logging in, all my icons and taskbar gone. So, i opened Windows Task Manager and run "explorer.exe". After everything came up, Some Data Execution Prevention error cropped up. Whenever i tried clicking "Close Message", it always came up again with a separate window for the "Send Error Report to Microsoft" dialog box.

Whenever I connected to internet, the link under my Internet started blinking very fast. I even left it without any internet application open, but it still went on. I saw the properties window of my connection. It went on and on. And in return, everything went slow. Internet surfing and downloading. And one major problem occurred that, whenever I leave my internet open for a short while, it shows the blue screen of error and restarts.

I thought of formatting every drive ... Read more

A:Logonui.exe error at startup, dvd-rom not burning discs, blue screen error and more.

Hello and Welcome to TSF. I suspect you are infected with Virut.

Please go to: VirusTotalOn the page you'll find a Browse button.
Next to the Browse button you'll see a box to enter text.
Please copy/paste the following bolded text into the box:

e:\windows\explorer.exe

Then click the Send File button just below.
This will scan the file. Please be patient.
If you get a message saying File has already been analysed: click Reanalyse file now
Once scanned, copy and paste the URL from your browser address bar in your next reply.
Please repeat for the following files:

e:\windows\system32\userinit.exe
e:\windows\system32\svchost.exe
e:\windows\system32\spoolsv.exe

------------------------------------------------------

Read other 4 answers
RELEVANCY SCORE 35.6

Here's my story:

My sister's PC had been corrupted in lots of unnecessary programs and apps.
I deleted those craps. Windows Action Center then prompts me to update my windows, and I did.
PC restarted and POOF!!!, I am seem to be forever stuck in the Startup Repair Loop.
So I tried System Restore, but it's giving me the error code stated above (error 0x80070003).
I also tried System Image Recovery, and it's not also of help. Also, checking Hardware Options didn't help.
Lastly, I tried the Command Prompt option and it gives me nothing.

So how can I possible fix this error? ((

thanks in advance for those helpful respondents ))

A:Startup Repair Error (Forever Loop) Error Code 0x80070003

Hello Cath, and welcome to Seven Forums.

You might see if the tutorial below may be able to help with this.

Startup Repair Infinite Loop Recovery

Hope this helps,
Shawn

Read other 2 answers
RELEVANCY SCORE 35.6

This is a family member's laptop. It is a Dell Inspirion N4110 running Win 7 Home Premium x64
They gave it to me complaining that the shutdown button restarts the computer and will not actually shut it down.
So I checked its preferences, they were fine. I went into the registry and changed the value from 1 to 0. That didn't work. (I changed it back)

I noticed on start up there is an error (it still pops up) that says there was a problem starting c:\users\blah\AppData\Roaming\homsp.dll The specified module could not be found.

The I decided to run a virus scan. Their McAfee had expired so I uninstalled it along with some odd software from a company called SysTweak or something and installed AVG and Malware Bytes. Those full scans came back clean except AVG found something and removed it but it wasn't of any significance to this issue.

I decided to check Windows Update, it wouldn't run. So I tried to restart it in Services and it wasn't there. After some piddling I found a program that supposedly fixed the problem for you. It was called Fix WU. I got it Softpedia. After running it the Windows Update service was back. I was able to install some updates and thought all was well. Then there were more updates. I tried to install them and got an error 80246008.

So I then realized BITS wasn't listed in the Services, either. I found a download (? [SOLUTION] Windows Update and BITS services missing) that contained reg files for Windows 7, installed it, ran the bits file and then res... Read more

A:Update error 80246008, Restart on Shutdown, dll startup error

I'm in no way a expert on such things but I did notice something you found.
SysTweak

Their is no way of knowing all the things a program like that has done. If I had to repair this computer I would start with a repair install.

Give this a good read.

Repair Install

Then I would install MSE for a anti virus and use the built in Windows Firewall.

http://windows.microsoft.com/en-us/w...tials-download

Little note: If you didn't use McAfee's online removal tool their could of been left overs of McAfee on the computer when you installed AVG and that would be just more problems.
Any anti virus program you remove I recommend using their own removal tool found online.

Read other 3 answers
RELEVANCY SCORE 35.2

After installing win7 64bit home premium I cannot rum Macrium Reflect (free).
On startup of MR I get this msg:

Problem signature:
Problem Event Name: BEX64
Application Name: Reflect.exe
Application Version: 5.3.7109.0
Application Timestamp: 53ccfa37
Fault Module Name: StackHash_511e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0000000171af0000
Exception Code: c0000005
Exception Data: 0000000000000008
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 511e
Additional Information 2: 511ea21ce31ca5b9d66e08a72b3f15b4
Additional Information 3: 41bf
Additional Information 4: 41bf1755a6f43c010a107e904eb3c9eb

Searching MR forum the only lead I got was Win VSS. (MR won't let free users register for forums)
VSS is autostart and running. I re-registered VSS componentsand that didn't work.
Any ideas or help?
Thanks,
Frank

A:Macrium Reflect error BEX64 (Win error?) on MR startup

Try to start clean boot Troubleshoot Application Conflicts by Performing a Clean Startup
Same problem?

Read other 3 answers
RELEVANCY SCORE 35.2

Hey Everyone,

Please help! I recently let my roomate use my desktop - and now my computer seems to be dying.

Upon startup I get the following 3 errors:

RUNDLL: Error loading C:\WINDOWS\ociganis.dll
RUNDLL: Error loading C:\WINDOWS\dshtpras.dll
hpqthb08.exe - Common Language Runtime Debugging Services: Application has generated an exception that could not be handled. Process id=0xfa0 (4000), Thread id=0xfa4 (4004). Click OK to terminate the application. Click CANCEL to debug the application.

ALSO - Most importantly... my internet is not working! I've gone into the settings and changed everything back to default, but still no luck.

Any help?

A:RUNDLL Error & hpqthb08.exe Error at startup - No internet

welcome! I know that hp one is from hp imaging programs that install with a scanner or camera or something. Try uninstalling that and let us know what happens.

Read other 3 answers
RELEVANCY SCORE 35.2

The rest fo the error message says- "Failed to read configuration file. Please contact system administrator"
I have just R and R'd Firefox and I'm still getting this error message. It won't run now and now I see just how horrible IE is in XP,since I'm forced to use it now....sob
Please Help!!

A:Firefox won't startup-Error message says "Configuration error"

Only an idea!!!!  Not sure but it may be the newer FF may not run well on XP, you could experiment by down loading and older version.
 
Just checked I may be right check the link below!
 
https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp

Read other 7 answers
RELEVANCY SCORE 35.2

I am having problems with my computer starting in safe mode all the time. I have tried going into msdos and putting in boot 0 and changing read only stuff back again but to no avail.(ie) brindle 10-20-03.. help! I must have changed something some where eh? Also I keep getting these error mess. more and more. I have aim and just recently it started giving me mss about that and if I don't catch the pop up window that comes with aim, in time then my puter freezes on me and I have to shut down and go in again.. Also....... I am still getting the start up mess of a file is missing and to delete and uninstall etc etc then it has Mcaffee system ini etc etc ,...Well I went and deleted all Mcaffee stuff as recomemned by styxx and am still getting this at start up? HELP I am ready to throw this out the window... no pun intended! My husband thinks I have ruined his computer and is still giving me dirty looks..... I have windows 98se. 254 mgbytes memory, I think,and have dsl...Help
 

A:safe mode and startup error and error messages

Have you tried going into set-up and resetting all controls to "default setting"?

You're computer is most likely going into default mode because there is something else wrong with it.

You most likely haven't ruined it........jus need to take this one step at a time

What were the first error messages you were getting?

What happened the first time your computer started in safe mode all by itself?
 

Read other 1 answers
RELEVANCY SCORE 35.2

  
Quote: Originally Posted by Kaktussoft


Try to start clean boot Troubleshoot Application Conflicts by Performing a Clean Startup
Same problem?


I'm having same problem, but this solution didn't work for me.

VSS is autostart and running.

I've been running Macrium Reflect (free) for months on this system with no problem, but seem to remember it updated a few days ago.

Any other ideas?

BTW, I notice this thread is marked 'solved' so should I open a new thread?

Thanks, J.

A:Macrium Reflect error BEX64 (Win error?) on MR startup

Confused.

This problem got solve with update of macrium reflect few days after this problem started. But again few days ago got other next update from macrium and now same problem happen again.

Think I'll change to Comodo backup, its free too.

Read other 1 answers
RELEVANCY SCORE 35.2

Hello,

I have read a lot of helpful information on this site, so for that I want to say thanks!

I am struggling to fix the error that I get upon startup on my Toshiba Satellite L655 which Reads"

RunDLL
Error in C:\Users\(my name)\AppData\Roaming\actxprxy1.dll
Missing entry:Igwq

I just realized that this isn't referencing actxprxy.dll - it has a "1" stuck in there which is raising a red flag for me and may be why all my google searches come up empty.

I have updated windows, which I didn't update currently because I keep it up to date, I have run Microsoft Malicious Software Removal Tool which found nothing, I have run Malwarebytes which found nothing I have of course run my current anti-virus, malware, registry cleaner software and it says all is good too. Nothing is running poorly on my computer but I am starting to think that there was something that happened and my computer was able to remove it but maybe not all of it or there are damaged files from it? I am not super computer saavy but I do pretty well and can definately can follow good directions. I would really appreciate any help with this that anyone can provide!

Thanks,
Gaby

A:Error upon Startup, "Error in C:\Users\....\actxprxy1.dll

Hello,

Is there a actxprxy.dll present?

Is there an error in your event logs? When does the error display?
Dave

Read other 9 answers
RELEVANCY SCORE 34.4

Hi. I am currently using windows xp professional and on startup, i get these two annoying messages:

RUNDLL:
Error loading C:\WINDOWS\xccdf16_080906a.dll
The specified module cannot be found

RUNDLL:
Error loading C:\WINDOWS\xccdf16_080906a.dll
The specified module cannot be found

These messages are very annoying and i would like to get rid of them.
Here is my hijackthis log:

Logfile of HijackThis v1.99.1
Scan saved at 12:06:33 PM, on 10/Sep/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Acronis\Schedule2\schedul2.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\IVT Corporation\BlueSoleil\BTNtService.exe
C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
C:\PROGRA~1\AVG\AVG8\avgam.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Common Files\Acronis\Fomatik\TrueImageTryStartService.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\Program Files\VMware\VMware Workstation\vmware-authd.exe
C:\Program Files\Common Files\VMware\VMware Virtual Image Editing\vmount2.exe
C:\WINDOWS\system32\vmnat.exe
C:\WINDOWS\system32... Read more

A:RUNDLL Error on startup, error loading

Read other 15 answers
RELEVANCY SCORE 34.4

When i startup my computer an error appears

(Name Of Box)MOM.EXE - .NET Framework Initialization Error
(Red circle with X) Unable to find a version of the runtime to run this application.
[ OK ] Button

The picture on the task bar is the ATI logo and says ATI. I looked up MOM.exe and knew it has something to do with ATI, i have tried uninstalling and reinstalling my ATI drivers, didnt fix the problem.

I was having a problem before where I had a similar error at startup. The name of the box was MOM.EXE, and it said it couldnt run the problem if i remember right.

Im both cases i can click the OK button and the error doesnt come up again until i restart my computer.

I am using Windows XP Home.

Thanks in advance for the help.

A:At Startup Error: Mom.exe - .net Framework Initialization Error

This error may be a result of the .NET Framework either not being installed or the installation is corrupt. Go Start > Control Panel > Add/Remove Programs and make sure the Show Updates box at the top is checked. Then search for an entry called:Microsoft .NET Framework 2.0If it is there remove it (don't worry if it is not there). Then go to this site and download a fresh copy of it. Install it, reboot and then see if your problem has been solved.

Read other 16 answers
RELEVANCY SCORE 33.2

Windows vista enterprise edition on start up shows an error rundll32.exe,
error message saying "windows cannot access the specified device,path,or file. You may not have the appropriate permissions to access the item

A:Rundll32.exe error on startup error message saying "windows cannot access the specified device,path,or file. You may not have the appropriate permissions to access the item

Hi,
Please click start, type msconfig and press Enter.
Under the startup tab, find the item reads like RUNDLL32.EXE, c:\windows\system32\xxx.dll and uncheck it.
Save the change and restart.
Or you can modify the registry by loading registry editor.
Navigate to HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Deleted the RUNDLL32.EXE, c:\windows\system32\xxx.dll
Regards,Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 3 answers
RELEVANCY SCORE 33.2

When the machine would normally be going to the Windows startup screen, instead it shows two lines of print separated by a blank line, white print on a black screen:

Boot error: 0-00


Select partition to boot, 0-3:_

the underline at the end of the second line is a flashing cursor. It remains with this showing until I enter any character, and hit 'RETURN', whereupon the normal boot process resumes. It doesn't matter if I enter one of the four requested digits or something else, any character will do. While this seems simple enough, it worries me - I don't like partition problems, especially since I'v seen Windows 7 repeatedly simultaneously convert normal partitions on up to three drives at once into completely unreadable garbage that no partitioning software can read. While there seems to be no consequence from this behavior, I've become very skittish since witnessing what Win 7 can so completely foul up. I've had this boot error before, and the only thing that removed it was completely repartitioning and reformatting the drive involved. Does any body recognise this? I've been working on and in computer systems since they were called 'numerical calculators', back in the fifties, and I've never seen this until two years ago. Both times I've seen this start, it's begun at startup from a cold boot, after a long series of drive changes, otherwise I know of no other common factor. I know I'm getting old and stodgy, but I really don't like this. The error stays with the driv... Read more

A:Startup error 'Boot error:0-00'

Just out of curiosity have you run a malware scan with malwarebytes?

Please download the free version of Malwarebytes.
Update it immediately.
Do a full system scan
Let us know the results at the end.

Malwarebytes : Download free malware, virus and spyware tools to get your computer back in shape!

Read other 4 answers
RELEVANCY SCORE 32.8

Today I got my new laptop and decided to dual boot Ubuntu and Windows 7 on it. After several hours of partitioning and researching, I ran into many issues. Eventually I decided to boot Ubuntu from a USB drive, open up Gparted, and delete any and all Linux partitions while expanding the size of the Windows partition back to normal.

Unfortunately, in the process, I must have made an error, because now upon startup I get the "bootmgr is missing" error. I don't have a recovery CD nor does my laptop have a CD drive, so that's out of the question, but I know for a fact my Hard Drive has a recovery partition on it. I want to restore my computer back to normal, keeping my old files if necessary. However, since I just got the computer today, I clearly don't have anything on there I can't afford to lose, so if I must do a factory reset I will.

A:"Bootmgr is missing" error upon startup, caused by human error

Welcome to the forum,

Sounds like quite a mess, you can try Bootmgr is missing - Fix

Since you don't have an optical drive you can USB Windows 7 Installation Key Drive - Create

Since you need a repair disc or an install disc to do that you'll want to create one

With the installer ISO for your licensed version here Official Windows 7 SP1 ISO from Digital River ? My Digital Life



You may just want to get a superior clean reinstall using the COA key on your computer,

Clean Reinstall - Factory OEM Windows 7

Read other 7 answers
RELEVANCY SCORE 32

First let me say that i know very little about computers so if this makes no sense let me know
when starting my computer up it starts normally then gives me an error on my desktop. all that i can do is hit ok, but it is obviously not supposed to be there. here is the details of the message, if anyone could tell me how it got there and how to get rid of it i would greatly appreciate it

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ArgumentOutOfRangeException: Cannot anchor balloon at position '{X=1135,Y=779}.' The point is not contained within the visible bounds of any screen.
Parameter name: point
Actual value was {X=1135,Y=779}.
at Rilling.Common.UI.Forms.BalloonWindow.MoveAnchorTo(Point point, Point pivot)
at Rilling.Common.UI.Forms.BalloonWindow.MoveAnchorTo(Point point)
at Rilling.Common.UI.Forms.BalloonWindow.Show(Point pt)
at Swapdrive.Client.Screens.FormMain.ShowCustomBalloon(CustomBalloonType balloonType)
at Swapdrive.Client.Screens.FormMain.OnTimer(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4216 (Vi... Read more

A:startup error

Hi plots33,Go to msconfig>>Startup tab and uncheck the box next to Dell DataSafe Online (if it's listed there). Restart your computer and see if that stops the error. If this fixes the issue, to continue using the program you will need to check for updates on the Dell website. To get to msconfig...Go to start...Type in msconfig.exe..Learn More About Dell DataSafe OnlinePaulineedited to include link about Dell DataSafe online

Read other 1 answers
RELEVANCY SCORE 32

everytime i start up i get this message
can anyone help?

Error Loading C:\WINDOWS\system32\jlnrungo.dll
The specified module could not be found.
 

A:Startup Error

Read other 7 answers
RELEVANCY SCORE 32

I am having trouble removing an error i receive on startup. The message reads as follows:
"Error loading C:\PROGRA~2\Kodak\EasyShareSetup\$REGIS~1\Registation_7.4.20.2.sxt The specified module could not be found".

I had a similar problem on my old computer which i sorted easily as i used msconfig to remove useless files on startup. This one however i cannot find on Vista OS and have had no luck searching through regedit. I have also tried programs such as Register Cleaner for Vista and Ad-aware 2007. As far as i know i cannot see what is trying to open this non-existent file relating to Kodak EasyShare which i uninstalled a few days ago. Please help.
 

A:run.dll error on startup

Read other 6 answers
RELEVANCY SCORE 32

Hello TeCH GuYyz

i wanna ask this question . i bought a new motherboard and a proccessor that is:

Intel P III processor
868 Mhz. 128 MB Ram

and installed windows XP sp2 FINAL EDITION on my 40GB Hard disk.. the problem is this that whenever i switch on my PC before anything happens.. a BLUE SCREEN COMES with an error stated the picture is uploded at http://mobile.info.tm/seth/error.jpg Please temme how to get rid of this error..

Note: this error comes just before anything
2ndly if i press EXIT SETUP the computer works perfectly fine afterwords..
Help me
 

A:Getting an Error on StarTuP

What is happening is the motherboard BIOS is telling you that it has to be updated. You should contact the manufacturer of the BIOS and obtain the latest BIOS upgrade from them and follow the instructions that come with it to install.
 

Read other 1 answers
RELEVANCY SCORE 32

I get a error when ever I boot up and windows start, i posted a topic with a screen shot of it as well and was told to put my HJT log here.

Thread with screenshot is located HERE




Quote:




Logfile of HijackThis v1.99.1
Scan saved at 12:35:34 AM, on 10/09/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton Internet Security\ISSVC.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Norton Internet Security\Norton AntiVirus\navapsvc.exe
C:\Program Files\Spyware Doctor\sdhelp.exe
C:\WINDOWS\system32\slserv.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files... Read more

A:Error on startup

Create an uninstall list:
Open HiJackThis
Click on the configure button on the bottom right
Click on the tab "Misc Tools"
Click on the Box that says "Open Uninstall Manager"
Click on the button "Save list"
Copy and past the List from the notepad file into your post

Read other 1 answers
RELEVANCY SCORE 32

the computer is 1.6 gb with 512 mb ram 60 gb hard drive and 865intel mb
on bootup it gives me this error pri master hard drive disk:s.m.a.r.t. status BAD, backup and replace (press f4) to resume

after that i can load some operating programs win 98 one time the recovery another the last time it wouldn't get past memory, but later after os is on i get error messages about not enough memory available.

is it the controller on the mb or is it something in the hard drive itself.

i did try fdisk and it keeps retrying to verify drive and repeats at 12 to 15 % goes back to 0% and starts again.

Thanks in advance for any help
 

A:s.m.a.r.t. error on startup

Read other 6 answers
RELEVANCY SCORE 32

when i turned on my pc i got one of those "send-dont send" winodws and on error details i got this:

C:\DOCUME~1\HOSSEI~1\LOCALS~1\Temp\WERdfe9.dir00\Mini072206-01.dmp
C:\DOCUME~1\HOSSEI~1\LOCALS~1\Temp\WERdfe9.dir00\sysdata.xml

is it anything bad?
 

A:Error during startup

Well it is only inside the temp files.
Clean out your temporary internet files.
Control panel>Internet options
Delete temp files> all offline files box NEEDS CHECKED
hit ok and then restart and see if it comes up again
GOOD LUCK
 

Read other 1 answers
RELEVANCY SCORE 32

After getting off of the internet my computer shut down by itself, I restarted it and the Windows Vista Startup Repair came up. I ran it and checked the details and it had this listed as a problem, "Unknown Bugcheck: Bugcheck dl. Parameters = 0x9897, 0x2, 0x8, 0x9897". I started it in safemode and ran a virus check but a black screen with an error message came up, I didn't get the whole message because it went away to quickly but what I got was something about unverified file was not digitally signed and it could be the cause of malware or a virus". I do not have a Windows Vista install cd, so I can't use that. Also, after trying to restart it, the computer made beeping noises but it wouldn't start. I really hope you can help me as it is a brand new computer. Thank you for your help.

EDIT: I got the black error message screen again, here is the message. " A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. If you have a windows installation disc, insert the disc and restart your computer. Click repair your computer, and then choose a recovery tool. Otherwise, to start windows so you can investigate further, press the enter key to display the boot menu, press F8 for Advanced Boot Options and select last known good. Status: 0xc0000428, Info: Windows cannot verify the digital signature for this file.

EDIT: I got the problem fixed so feel free to ... Read more

Read other answers
RELEVANCY SCORE 32

I used the system recovery cd today because my sound wasn't working. Well, my sound works now but at every time I turn the computer on I get a windows explorer error and can only see the "Start" and time on the bottom bar. It also keeps refreshing itself every couple of minutes after every error report.
it pretty much just says "Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience."
can't use the windows button on the keyboard or anything, its just an hourglass when I put the pointer over the bottom bar.

any help would be appreciated, thanks

A:error at startup

Okay, first because of a sound problem, you basically reinstalled the entire Operating System ?

Given that you have done so, it's possible the install was bad. You could just reinstall again and see if it works right this time.

Normally, bad installs mean a hardware problem. Maybe a scratched disk, but doubtful. Bad Cd drive or bad Hard Drive. Or worse.

Did you do anything to the computer after the reinstallation. Install any programs ?

Did you go on the internet without updating windows, and setting up an Anti-Virus software ?

Read other 4 answers
RELEVANCY SCORE 32

Hey guys,
 A friend of mine has been getting two run dll errors on startup. Ive updated everything and it is still showing up. What should I do next? Any help is appreciated. 
 
The errors are C:\users\username\AppData\Roaming\seade.dll and C:\users\username\appdata\roaming\diprui.dll specified module could not be found.
 
 
Thanks

A:Run DLL error on startup

See reply to your topic at http://answers.microsoft.com/en-us/windows/forum/windows_7-files/im-getting-a-run-dll-error-on-startup/7d163e6d-6ccf-4d40-aefd-14986a4945b6 .
 
Louis

Read other 1 answers
RELEVANCY SCORE 32

Hey, Every time I boot up my computer I keeping receiving the same ATI error.

"could not load file or assembly 'MOM. Implementation, Version=2.0.3758.8360, Culture=neutral, PublicKeyToken=90ba9c70f846762e' or one of its dependencies. The system cannot find the file specified.

Now I'm pretty sure that this is a ATI driver issue, but I don't know how to go about replacing that driver with an updated one. Please help me out guys.

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: AMD Turion(tm) II P540 Dual-Core Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 3834 Mb
Graphics Card: AMD M880G with ATI Mobility Radeon HD 4250 , 320 Mb
Hard Drives: C: Total - 456418 MB, Free - 253528 MB; D: Total - 20216 MB, Free - 2937 MB;
Motherboard: Hewlett-Packard, 143F, 67.32, PL820011ZZU0QQ
Antivirus: Norton Internet Security, Disabled
 

A:ATI Startup Error

Go here and select your card and os.........
http://support.amd.com/us/gpudownload/Pages/index.aspx
Download the driver to your desktop.
Your driver is listed under integrated motherboard graphics/
radeon integrated HD series
Go to start/control panel/programs and features.
Double click AMD catalyst install manager listing.
Run uninstall and select express uninstall of all software.
Uninstall the software.
Run the installer you downloaded to install the latest driver.
 

Read other 1 answers
RELEVANCY SCORE 32

Hello,

Each time I start my computer, I receive a message stating:

DLL C:\WINDOWS\System32/2ndsrch.dll is not a valid windows image.

I ran adaware and spybot (deleted everything in red). Any attempt to install Spyware Blaster failed because:

C:WINDOWS\System32\MSINET.OCX error occured while trying to replace existing file DeleteFile failed;code 32. It is being used by another process.

I ran HiJack This

Logfile of HijackThis v1.97.7
Scan saved at 12:09:05 PM, on 1/4/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\Program Files\McAfee\McAfee VirusScan\Avsynmgr.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\wanmpsvc.exe
C:\Program Files\McAfee\McAfee VirusScan\VsStat.exe
C:\Program Files\McAfee\McAfee VirusScan\Vshwin32.exe
C:\Program Files\McAfee\McAfee Firewall\CPD.EXE
C:\Program Files\Common Files\Network Associates\McShield\Mcshield.exe
C:\Program Files\McAfee\McAfee VirusScan\Avconsol.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\McAfee\McAfee Firewall\CPDCLNT.EXE
C:\WINDOWS\System32\hkcmd.exe
C:\WINDOWS\AStart.exe
C:\Program Files\McAfee\McAfee VirusScan\alogserv.exe
C:\Program Files\Roxio\Easy CD Creator 6\DragToDi... Read more

A:error on startup

Read other 11 answers
RELEVANCY SCORE 32

hi
I AM POSTING THIS THREAD AGAIN....
PLEASE REPLY
i am using a win vista operating system in my laptop
i dont know how i get RunDLL errors....
these are the errors with subject of "specific module could not found"
c:\users\.......\temp\rqRKCrOi.dll

and

c:\users\.......\temp\ssqRKbYp.dll

please help me to remove this erros

and i want to remove expired norton antivirus from my system, so how can i remove it?????

wait for reply!!!!
p
 

A:startup dll error ............

Go to control panel then click on add remove programs and uninstall norton.
 

Read other 1 answers
RELEVANCY SCORE 32

hi
i am using a win vista operating system in my laptop
i dont know how i get RunDLL errors....
these are the errors with subject of "specific module could not found"
c:\users\.......\temp\rqRKCrOi.dll

and

c:\users\.......\temp\ssqRKbYp.dll

please help me to remove this erros

and i want to remove expired norton antivirus from my system, so how can i remove it?????

wait for reply!!!!
p
 

Read other answers
RELEVANCY SCORE 32

Awhile ago MBAM detected something and got rid of it. Now during start up this message pops up...

There was a problem starting
C:\Users\Len\AppData\Roaming\acccore\sp.DLL
The specified module could not be found.

I figure it's something left behind from what ever was infecting my computer. Any help on how to rid of it? Thanks.

A:sp.DLL error on startup

DownloadTDSSkillerLaunch it.Click on change parameters-Select TDLFS file systemClick on "Scan".Please post the LOG report(log file should be in your C drive) Do not change the default options on scan resultsDownloadaswMBRLaunch it, allow it to download latest Avast! virus definitionsClick the "Scan" button to start scan.After scan finishes,click on Save logPost the log results here.If you get crashes in normal mode,run it in safemode with networkingDownloadESET online scannerInstall itClick on START,it should download the virus definitionsWhen scan gets completed,click on LIST of found threatsExport the list to desktop,copy the contents of the text file in your reply

Read other 11 answers
RELEVANCY SCORE 32

could someone help please i get startup error over and over again when i boot my laptop and nothing happens i cant even enter safe mode or even boot from disk to format all the setting are fine aswell in bios.
 

A:startup error

What is the exact error you are getting on startup?
 

Read other 3 answers
RELEVANCY SCORE 32

I get an error msg saying problem with wintxr32.rom , does anybody know what this is? I am currently running a virus scan.

A:startup error msg

According to Bleeping Computer that is Malware processThis entry has information about the startup entry named wintxr32 that points to the wintxr32.dll file.(Source) http://www.bleepingcomputer.com/startups/wintxr32-16104.html If you are able to boot Please run your AV scan+ any Anti-Mal ware scan (www.malwarebytes.org/) or (www.superantispyware.com/)If you run MBAN Please post the scan log to this thread

Read other 2 answers
RELEVANCY SCORE 32

I am running xp pro with sp2. Everytime I get "error loading C:\windows\system32\sprt_ads.dll acess is denied" when my computer starts up and loads to the point where you start using windows. I can click ok and it goes away and everything works as it is supposed to. I go to msconfig and on the startup tab it is checked for loading at startup. The line is "sprt_ads C:\windows\system HKLM\Microsoft\Software\Windows\CurrentVer..
I can uncheck it and click apply and reboot but it comes up saying the same thing when I get to my desktop. I looked in system32 folder but there is no file sprt_ads.dll. I tried starting up in safemode but the error message still comes up. I unchecked all startup items in msconfig and rebooted but it comes up again at startup and when i go back to msconfig, it is checked again. What program uses this so I can take care of this problem? Thanks in advance for any help you can give.

A:Startup Error

This usually associated with a Rogue Spyware program such as IEDefender. They usually bring on Popup ads to entice you into buy said program or others. Are you having Popups?Please follow these instructions How to remove the Smitfraud / Generic Zlob Then do this: Download Attribune's ATF Cleaner and then SUPERAntiSpyware, Free Home Version. Save both to desktop .. DO NOT run yet.Open SUPER from icon and install and Update itUnder Scanner Options make sure the following are checked (leave all others unchecked):Close browsers before scanning.Scan for tracking cookies.Terminate memory threats before quarantining.Click the "Close" button to leave the control center screen and exit the program. DO NOT run yet.Now reboot into Safe Mode: How to start Windows in Safe ModeDouble-click ATF-Cleaner.exe to run the program.Under Main "Select Files to Delete" choose: Select All.Click the Empty Selected button.If you use Firefox browser click Firefox at the top and choose: Select AllClick the Empty Selected button.If you would like to keep your saved passwords, please click No at the prompt.If you use Opera browser click Opera at the top and choose: Select AllClick the Empty Selected button.If you would like to keep your saved passwords, please click No at the prompt.Click Exit on the Main menu to close the program.NOW Scan with SUPEROpen from the desktop icon or the program Files listOn the left, make sure you check C:\Fixed Drive.Perform a Complete scan. After scan,Verify they are all ch... Read more

Read other 3 answers
RELEVANCY SCORE 32

I am running windows 2000. When I boot up I get an invalid drive type A error message. It allows me to hit the "Esc" button and continue on. However, my floppy drive doesn't work. I checked my cables they seem to be attached correctly. Can you help?
 

A:Startup error

Read other 6 answers
RELEVANCY SCORE 32

Hi, I'm new. And I have many problems. One of which hopefully somebody here can help me with. Here it is:
I'm running Norton Internet Security (NIS) on my computer and every time my PC boots up (or more accurately when I log in, with any user) I get a WIndows Installer popup, followed by an error message saying something along the lines of "Norton Internet Security does not support the repair feature. Please uninstall and reinstall." My option is to press "Ok". Sometimes this gets rid of the popup and the MSI window, sometimes I have to hit it a few times (each time I do this it momentarily dissappears then pops right back up again). If I'm quick I can hit "Cancel" on the MSI window which aborts the whole process and prevents the popping-up of said error. But usually I don't bother. Before y'all ask/direct, I've uninstalled it and reinstalled it - several times, and the problem always returns. I also get the error any time I start an office application (Word, Excell, etc). Actually, I think having MS Office in startup is the trigger, but I'd really like to be able to stop the error completely.
I'm running Windows XP Pro SP2 and this is really starting to make me irate. If I hadn't paid for twelve months of Norton updates I'd p*** it off and switch to something else - surely no other anti-virus/firewall program is as resource hungry as industrial-strength Norton?
Help me Obi-Wan Kenobi, your my onl... Read more

A:NIS - Error on startup

Read other 10 answers
RELEVANCY SCORE 32

Recently I've begun getting errors on startup.
The error basically opens DOS and then a popup box comes up that says there's an error..it gives this information:

C:\DOCUME~1\ALLUSE~1\APPLIC~1\03450843\03450843.exe

CS:0de3 IP:021f OP:63 6b 67 72 6f


Ive run CCleaner as well as Ascensive PC Speedpro to no avail..the error still happens on startup.

Can someone please guide me through the steps i need to take to resolve this issue?

A:Startup MS Dos error

You should look at what startup programs are running. msconfig, startup tab, might be of help (start, run, msconfig.exe).
I'd also scan 03450843.exe with an antivirus or antispyware program. That's a rather suspicious file name. It's likely a 16-bit program hence the messages you're seeing. It's possibly even buggy (looks like it's crashing), so perhaps you're not getting any payload (+ 16-bit programs may not work entirely on pure 32-bit OSes like NT, 2000, or XP). Scan anyway to be sure.

Read other 2 answers
RELEVANCY SCORE 32

I have been having a lot of issues with my computer today. First, it froze up on me, so I had to restart it. After I restarted my computer, the Windows load screen comes up, but after it goes away it just gives me a black screen. No login screen or anything. So, I just restart again, and the same thing happens. Now when I try to restart it brings me to a screen that says exactly this "American Megatrends. AMD Athlon(tm) XP 2700+. Checking NVRAM.." Is there anything that I can do to get this to stop? Has my hard drive been "wiped" and have I lost all my files?

Any help or suggestions would be greatly appreciated.
Thank you.
 

A:Startup Error - Help please

Hi,

Switch on and constantly tap f8.
When you get presented with the options try "Last Known Good Configuration".

If this fails .....can you boot up in Safe Mode from the same list of options?
 

Read other 3 answers
RELEVANCY SCORE 32

Recently I've been getting a blue screen when I start windows. It occurs randomly (sometimes computer starts fine) and I can't seem to fix it. The following text is at the bottom:

STOP: 0x000000C5 (0xE1A7F000, 0x00000002, 0x00000001, 0x805448E9)

The error screen also states I should go into the BIOS and disable shadowing. Since I have no idea what this is, I'd rather not mess with BIOS settings. Also, in the Event Viewer I found error entries with this:

The following boot-start or system-start driver(s) failed to load:
abp480n5
adpu160m
agp440
agpCPQ
Aha154x
aic78u2
aic78xx
AliIde
alim1541
amdagp
amsint
asc
asc3350p
asc3550
cbidf
cd20xrnt
CmdIde
Cpqarray
dac2w2k
dac960nt
dpti2o
hpn
i2omp
ini910u
IntelIde
mraid35x
perc2
perc2hib
ql1080
Ql10wnt
ql12160
ql1240
ql1280
sisagp
Sparrow
symc810
symc8xx
sym_hi
sym_u3
TosIde
ultra
viaagp
ViaIde



The computer is a new Gateway CX2610 Convertable Laptop. Microsoft Windows XP Tablet PC Edition 2005 Version 2002 Service Pack 2.
Intel(R) Pentium(R) M processor 1.73GHz 512 MB RAM.

Any help would be appreciated, this is annoying me.

A:XP Startup Error

You should be able to boot to your recovery CD and do a repair install. What I am seeing here is a lot of system driver corruption (IDE channel, AGP channel, etc.)

Read other 15 answers
RELEVANCY SCORE 32

I keep getting this msg when I start the computer up. Just wondering what it is.

A:Error msg on startup

Ohh.. And it keeps popping up at least 20 times after I click on ok. It wont quit for awhile..

Read other 4 answers
RELEVANCY SCORE 32

Hi all,

The Vundo virus infected my system about a month ago, and i ran the Vundo fix program. It identified two files as being infected: grcqaskq.dll and qksaqcrg.ini. It moved those two files to the Vundo fix backup folder. Since then, every time i startup windows, a dll error pops up:

Error loading C:\Windows\System32\grcqaskq.dll

Access is denied.

Can someone tell me why this keeps popping up after the two files were identified as being infected? Here is my HJT logfile if it helps to resolve the issue. Thanks in advance.

Logfile of HijackThis v1.99.1
Scan saved at 7:06:35 PM, on 5/23/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16441)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Softex\OmniPass\Omniserv.exe
C:\Program Files\Photodex\ProShowGold\ScsiAccess.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Softex\OmniPass\OPXPApp.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Alwil Software\Avast4\ashMaiSv.exe
C:\Program Files\Alwil Software\Avast4\ashWebSv.exe
C:\windows\system\hpsysdrv.exe
C:\WINDOWS\system32\hkcmd.exe
C:\HP\KBD\KBD.EXE
C:\WINDOWS\s... Read more

A:dll error at startup

Read other 12 answers
RELEVANCY SCORE 32

When starting my PC just before the desktop appears I get a box that pops up:

Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c

if I click cancel or retry it just comes back if I click proceed then I can continue.
Also the PC continues to startup normaly during this time.
Anyway to get rid of this?

WinXP pro version 2002
service pack 2

Thanx
 

A:Error during startup

Did you install any new software or hardware prior to getting this message?
 

Read other 3 answers