Over 1 million tech questions and answers.

New Laptop BSoD Power State Driver Failure

Q: New Laptop BSoD Power State Driver Failure

Hello,
I am new. I cannot access my minidump folder because I do not have access and cannot find out how to get access, otherwise I'd post it up.

I am trying to download new chipset drivers from gateway and I am sitting at 0% the download will not start.

The laptop is new roughly 3 months old. I am running Vista 64 on a Gateway P-7800. I've BSoD'd probably 15 times in the last week or so. Please help. Thanks.

RELEVANCY SCORE 200
Preferred Solution: New Laptop BSoD Power State Driver Failure

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: New Laptop BSoD Power State Driver Failure

Follow the instructions here: http://www.techsupportforum.com/1871981-post2.html

It will provide us with the minidumps and more information about your system.

Read other 11 answers
RELEVANCY SCORE 111.2

From day one when I opened up this laptop it was crashing. I've had the RAM replaced, the SSD (twice), factory reset, MOBO replaced, and still the same intermittent crashing. The company I bought this from "tried" to fix it but couldn't ever get anywhere. This has been a 2 year P.I.T.A. for me and I'm finally coming to you guys because the company I bought this from has informed me that my warranty is up and I will have to start paying for their "help". I thought that was comical. Nonetheless. Here I am. I need help. Not sure where to start because I've never been able to pinpoint the cause. Most of the time the BSOD reads "Driver State Power Failure". I've personally updated all of my drivers, chipset, BIOS, graphics card, etc. The vendor has also done the same. To no avail.

Let me know what I can do to help someone diagnose this for me.


Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 16273 Mb
Graphics Card: NVIDIA GeForce GTX 960M, -2048 Mb
Hard Drives: C: 110 GB (31 GB Free); D: 1863 GB (1381 GB Free);
Motherboard: ASUSTeK COMPUTER INC., G551JW
Antivirus: Windows Defender, Enabled and Updated
 

A:New Laptop - BSOD - Driver Power State Failure

It sounds like you have an ASUS ROG G551JW laptop which originally came with Windows 10 Home 64-bit.
You say you bought it new and had problems with it the very first day of use, so I'm surprised you didn't return it for another one instead of having hardware replaced in it for the past 2 years.

There are several links here that you can read about "driver power state failure" in Windows 10.
https://www.google.com/?gws_rd=ssl#q=driver+power+state+failure+windows+10&spf=1498270496270

----------------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 110

Dear forummers,

Recently, I've been heving some BSOD'S wen putting my GE70-i550M287FD to sleep mode or hibernation. The NB just stays just active with a black screen for a while, only to end up in a BSOD eventually.
It gives me always the same BSOD, so I figured it would be caused by a single error. However, I haven't been able to detect and fix it up until now. I hoped that some of you might have dealt with it before or know how to deal with it.

The only hardware I've got plugged is the mouse. I have't been able to test if I got the same error without the mouse plugged. Also, this BSOD ONLY occures when going into hibernation/sleep mode.

This is a photo from the BSOD I keep getting once a week/2 weeks or so.

IMG_20140212_213442_zpse94cdbb9.jpg Photo by esmorax | Photobucket

I have read something about minidump files. How do I open them and do they contain any necessary information needed to fix this error?

Thank you in advance!

esmorax

A:MSI GE70 Driver-Power-State-Failure BSOD help :( (Laptop)

Hello Esmorax, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 8 answers
RELEVANCY SCORE 110

This error has been happening for 80% of the time when my laptop is shutting down or restarting. It started few days ago when I removed everything and reinstalled windows. I then refreshed my laptop couple of times but the problem is still persisted. I updated windows and all devices are up to date. Restarts are also slow when it does restart properly.

When I tried updating to windows 8.1, it would stop at "setting up 82%" and had to hold the power button to turn off the laptop couple times.

Dump file: https://www.dropbox.com/s/jdivgtmu3a...37-01.dmp?dl=0

ASUS laptop
Disk Drives: TOSHIBA MQ01ABD100
DVD/CD-ROM drives: HL-DT-ST DVDRAM GU71N
i7 3537U
8 GB DDR3
Nvidia Geforce 740M

A:BSOD - Driver Power State Failure when laptop shuts down

Please read BSOD Posting Instructions

Read other 2 answers
RELEVANCY SCORE 108.8

Hi,

I'm getting frequent random BSOD Power_Driver_State_Failure on my ASUS G551JM Laptop (https://asus.com/support/Download/3/...RbVetG02i5/41/) It happens while plugged in and running off battery but more frequently on battery power. It usually happens within 30 minutes of powering on the laptop or waking it up from sleep/hibernate. It primarily happens after logging into windows but on rare occasion will blue screen prior.

I've updated drivers from Asus and chipset manufacturers websites: intel rapid storage driver, Intel MEI driver, Intel INF driver, Intel wifi and bluetooth drivers, clean installed nvidia gtx 860m drivers. I tried to update intel HD graphics drivers but got this error message:
Computer Manufacturer Graphics Driver Detected. Your computer manufacturer customizes the drivers that run Intel components on your machine. You might lose functions and cause other technical issues by installing the Intel drivers.
Windows updates are up-to-date and no virus or malware.

Please help,
Thank You.

DM Log collector Tool LOST-Wed_08_03_2016_190523_80.zip

A:ASUS Laptop Constant BSOD Power Driver State Failure

Hi rapidvodka,

I would recommend to install the Nvidia drivers from ASUS

Code:
2: kd> !irp
Irp is active with 0 stacks 0 is current (= 0xffffe001e81748c0)
Mdl=ffffd0006f0853c8: No System Buffer: Thread ffffd0006f085458: Irp stack trace.
cmd flg cl Device File Completion-Context
2: kd> !irp ffffe001`ed49d010
Irp is active with 6 stacks 4 is current (= 0xffffe001ed49d1b8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe001e9fb3540 00000000 fffff80103cfe590-ffffd0006a7eb8f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe001ed481040 00000000 fffff80352fa875c-ffffe001ef323f08 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for n... Read more

Read other 3 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98.4

Hey guys!
I am hoping someone can help me.. I am going to upload the mini dump files that have been saved. I just got this new laptop today and have since had about 10 blue screens of death. I have not installed anything on this new computer besides Firefox. I am hoping that somebody can help me! thank you.

A:driver power state failure first day of use new laptop

Hi.

Please update this card reader driver to alleviate your issues:

Code:
o2sdx64 o2sdx64.sys Wed May 06 21:56:18 2009
Also good to do:

I also noticed many older drivers. Please visit ATI's website to get the latest video card driver.

Read other 4 answers
RELEVANCY SCORE 98.4

So about a month and a half ago I bought myself a new MSI Laptop, and in the past 3 weeks I've had 5 Driver Power State Failure (DPSF) BSOD's. I've searched around but I'm not confident enough when it comes to BSOD's to actually do anything without first getting some advice for my particular problem.All I have really been able to tell from this is that the error always occurs at the same location, ntoskrnl.exe (+7cc40), which, being a critical part of the OS, I assume is a very bad thing. Anyways, here are the minidump files:==================================================
Dump File : 090111-18798-01.dmp
Crash Time : 01/09/2011 2:40:06 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`07a29a10
Parameter 3 : fffff800`049423d8
Parameter 4 : fffffa80`0aa02970
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7cc40
File Description : NT Kernel & System
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.17640 (win7sp1_gdr.110622-1506)
Processor : x64
Crash Address : ntoskrnl.exe+7cc40
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\windows\Minidump\090111-18798-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File... Read more

A:Driver Power State Failure - New MSI Laptop

I would try...downloading (from MSI website)...chipset and wireless drivers for your system...then removing the current drivers via Device Manager, followed by installation of the new ones.

Or...if you have drivers CD with your system, you can use that, rather than downloading drivers from MSI website.

Louis

Read other 3 answers
RELEVANCY SCORE 98

I just recently got a new laptop and have gotten BSOD twice now with DRIVER_POWER_STATE_FAILURE
I wasn't on the computer at the time of the errors, the first time it was on over night downloading, the second time i think it just had some folders open and google chrome.It is on Windows 7 Home Premium 64bit OEM, I've only had it for about 2 weeks.
HP Pavilion dv6-6b10tx Notebook (DV66B10TX(A3E16PA)) | Techbuy Australia
I couldn't run perfmon /report it said
An error occured while attempting to generate the report.

Access Denied.

Hope you can help!

A:BSOD Driver power state failure 9f

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [K:\BSODDmpFiles\787Bill\Windows_NT6_BSOD_jcgriff2\012712-21496-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`041733c0?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02c5c000 PsLoadedModuleList = 0xfffff800`02ea1670
Debug session time: Fri Jan 27 01:38:38.811 2012 (GMT-7)
System Uptime: 0 days 8:57:27.857
Loading Kernel Symbols
...............................................................
................................................................
.................................................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*************************************************... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hi all, I've been receiving a Driver Power State Failure BSOD after shutting down/restarting my machine since yesterday. I just installed the Windows 7 RC1. My shutdown is taking around 20 minutes before crashing with the BSOD. How do I find out what is causing the error and fix it? Should I post my minidump? Thanks.

A:Driver Power State Failure BSOD

If you post your mindump files someone can take a look.

Read other 9 answers
RELEVANCY SCORE 98

Hello,
I have been getting a Driver power state failure bsod for about a week now. Some days it doesn't seem to occur that much while other its several times an hour. From googling it seems like the issue is either an out of date driver or my ram. I"ve run "whocrashed" and "bluescreenview" which point to

This was probably caused by the following module: ntoskrnl.exe (nt+0x14F9A0)
Bugcheck code: 0x9F (0x3, 0xFFFFE00101519060, 0xFFFFD0018AB69960, 0xFFFFE00106234C10)

but I guess this isn't the actual driver (or ram) causing the issue. Any help would be appreciated.

Thanks,

A:Driver power state failure BSOD

Hi jag213,

Welcome to the 8forums.

Please do the following:
Open an admin command prompt
Copy/paste "sfc/scannow" (without quotes) and press enter
When it finished reboot your system
Open again an admin command prompt
Enter sfc/scannow again
If sfc/scannow doesn't say "Windows Resource Protection did not find any integrity violation", please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

Please fill in your system specsPlease go to this site and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

Read other 10 answers
RELEVANCY SCORE 98

System Specs:
Windows Home Premium 64bit
Original System
OEM
Both hardware and system are 1 week old

Woke up this morning to find the BSOD

A:BSOD Driver Power State Failure

  
Quote: Originally Posted by cuz314


System Specs:
Windows Home Premium 64bit
Original System
OEM
Both hardware and system are 1 week old

Woke up this morning to find the BSOD


This was Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation

I would re-install using newest.

Read other 4 answers
RELEVANCY SCORE 98

Just started happening within last 2 days.

Gateway P7811FX laptop (approx 2yrs old), full retail Win7 Pro x86 installed early June 2011. Never had a BSOD until last couple days. Both crashes occurred seemingly at random (not at startup).

Ran verifier as instructed here and OS crashed at startup. Able to turn off Driver Verifier in Safe Mode. Restarted normally to collect dump and perfmon files.

TIA

A:BSOD Driver Power State Failure

A device driver is probably the cause
For that reason old drivers should be updated:

Synaptic Touchpad driver Drivers | Synaptics
SD reader driver Fujitsu Gateway Support - Downloads & Support Documents
Conexant modem driver(s) Gateway Support - Downloads & Support Documents
Marvel Yukon Network driver Marvell - Support


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 00000003, A device object has been blocking an Irp for too long a time
Arg2: 87bff2d8, Physical Device Object of the stack
Arg3: 82b2cae0, Functional Device Object of the stack
Arg4: 85e51ef8, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: 85e51ef8

DEVICE_OBJECT: 87999510

DRIVER_OBJECT: 85dc24b0

IMAGE_NAME: disk.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bbf20

MODULE_NAME: disk

FAULTING_MODULE: 8b218000 disk

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from 82acbf35 to 82ae3f2c

STACK_TEXT:
8... Read more

Read other 5 answers
RELEVANCY SCORE 98

OS - Windows 7 pro x64 - In place upgrade (since November 2009)

original installed OS - Vista Business x64 - OEM

System is 1 year and 3 months old

CPU - Intel Core 2 Quad Q6600 @ 2.40GHz

Video Card - Nvidia Geforce 9500 GT (1GB)

Motherboard - Asus - IBIBL - LB (benicia)

power supply - Coolmax M-500B - 500watts

The past week I noticed that every time I put my computer to sleep, I would notice that my monitor would either stay on or I'm assuming after a short while come back on while the rest of the computer was sleeping. My monitor by the way is a Samsung Syncmaster 2232BW plus. I noticed this monitor staying on problem at least 3 times this week. So today, I left my computer on, and when it tried to automatically enter sleep mode, a stop error occurred. This is the first time that I got this blue screen as the computer tried to enter sleep mode. Other system information that might be useful: I have a wireless mouse and keyboard, both logitech and both are operating with setpoint. I also have a Creative SB X-Fi sound card installed. Furthermore, shortly before this post I went to device manager and updated the driver for my videocard.

A:Driver Power State failure BSOD

Hi -

The bugcheck on the single dump file -

0x9f (0x4,,,) = driver is causing an inconstant power state - it is not able to sync with the PnP subsystem. The default NT Kernel named as probable cause.

I believe it to be a combination of NIC + Norton Internet Security.

Your D-Link DWA-556 Xtreme N PCIe Desktop Adapter driver must be updated - too old for Windows 7 -

Code:

jswpslwfx.sys Mon Apr 28 19:59:25 2008 (481664DD)

However, there are NO Windows 7 drivers listed for it and the April 2008 Vista driver appears to be the most recent available.

D-link Support DWA-556 --> http://www.dlink.com/products/?pid=DWA-556&tab=3

If you cannot locate an updated driver, the device will need to be replaced.

Remove NIS/ N360 from your system -

Download the Norton Removal Tool (NRT); save to desktop. Boot into SAFEMODE - NO Networking. Tap F8 key during boot-up. Go to desktop, RIGHT-click on the NRT icon and select Run as Administrator. When complete - re-boot.

NRT - ftp://ftp.symantec.com/public/englis...moval_Tool.exe

Reset the Windows Firewall to its default settings -
START | type firewall.cpl | select firewall.cpl above under programs | top-left, select "Restore Defaults"

Install MS Security Essentials --> http://www.microsoft.com/Security_Essentials/

Regards. . .

jcgriff2

.

Windows 7 RTM x64 -- BSOD Bugcheck 0x9f (0x4,,,)

Code:
Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hi

i recently bought a second hand alienware and i am constantly getting driver power state failure bsod

is this the code you need for someone clevere than me to tell me whats causing the problem

9f
BCP1: 0000000000000003
BCP2: FFFFFA800D619A10
BCP3: FFFFF80000B9C3D8
BCP4: FFFFFA801392F560
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

thanks in advance

A:driver power state failure bsod

btw iv updated drivers and bios from dell and ran the diagnostics checks the last bluescreen analyzer is this




0x0000009F_0x0000000000000003__0xFFFFFA800D595A10__0xFFFFF80000B9C3D8__0xFFFFFA8012C68A90_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5B3A10__0xFFFFF80000B9C3D8__0xFFFFFA801265FB40_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5D5060__0xFFFFF80000BA2748__0xFFFFFA80125D4490_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800F9F1E10__0xFFFFF80000B9C3D8__0xFFFFFA8012AB9C60_C__Windows _system32_drivers_hdaudbus_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D618060__0xFFFFF80000B9C3D8__0xFFFFFA8011AFE1B0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D614A10__0xFFFFF80004157748__0xFFFFFA8013485400_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5D9A10__0xFFFFF80000B9C3D8__0xFFFFFA8012A47CA0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D617060__0xFFFFF80000BA2748__0xFFFFFA80128E54D0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D597A10__0xFFFFF80000B9C3D8__0xFFFFFA801262B200_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D610A10__0xFFFFF80000B9C3D8__0xFFFFFA800D7FA800_C__Windows _system32_drivers_pci_sys

Read other 9 answers
RELEVANCY SCORE 98

Came back to a computer that won't shut down, restart or sleep properly. When it does it takes several minutes and at one time gave me the titular BSOD. Everything works fine in Safe Mode (go figure), so I've got a rogue driver in here and I can't for the life of me figure out which one's causing the trouble.

Other symptoms are slow startup (screen starts black for up to a minute after the welcome screen) and Device Manager hangs whenever I try to change (enable/disable, uninstall) drivers. I picked up a hotfix (KB977307) to alleviate the shut down/sleep symptoms but I'd like a little more information before I install it.

Aside from those symptoms there's no major hit to running performance. It looks like I can still use my main comp but I have to rely on hard power downs and jump through safe mode to turn on the computer. The device manager issue is such because I often have to reset my network adapter (Unid network kills my internet sometimes, working to fix that). This will become more of a problem when the next rounds of updates come knocking though.

Basic Spec:
Processor/Mobo/Memory Upgraded Feb 2011
Windows 7 64-bit (x64) Ultimate
Retail (received from MSDN)
Installed Feb 2011

A:BSOD: Driver Power State Failure

Run a system file check - SFC /SCANNOW Command - System File Checker

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests
BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Thu May 19 09:21:57.143 2011 (UTC - 4:00)
System Uptime: 0 days 0:14:30.439
*** ERROR: Module load completed but symbols could not be loaded for WUDFRd.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT_LARGE
BiosReleaseDate = 12/24/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed: 3300
CurrentSpeed: 3310
??????????????????????????????????????????????????????????????????????????????????????``

Read other 2 answers
RELEVANCY SCORE 98

I have been having random BSODs for Driver Power State Failure. I have attached the file requested.

Windows 7 Ultimate x64
Retail Version
Home built PC OS installed 18 months ago

A:Driver Power State Failure BSOD

  
Quote: Originally Posted by TomanSager


I have been having random BSODs for Driver Power State Failure. I have attached the file requested.

Windows 7 Ultimate x64
Retail Version
Home built PC OS installed 18 months ago



HI TomanSager and welcome

These crashes are virtually identical and Related to hidusb.sys Microsoft HID Class Driver.

It is simply taking too long to respond and there is probably a USB device preventing it.

What USB devices do you have connected?


I would run a system file check to verify and repair the OS files.

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

Read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report.


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\JMH\Desktop\Windows_NT6_BSOD_jcgriff2\051511-19047-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (3 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Bu... Read more

Read other 4 answers
RELEVANCY SCORE 98

Current OS
? Windows 7 Home Premium
? 64-bit

? What was original installed OS on system?
Windows Vista Home Premium 64-bit.

? OEM version (came pre-installed on system) or full retail version?
OEM Version.

? Age of system
7-8 Months.

? Age of OS installation
Windows 7 just installed, but i had this problem previously with Vista.

? CPU
Intel i7 920

? Video Card
Nvidia GTX 285

? MotherBoard
Not sure.

? Power Supply - brand & wattage
Not sure.

Thank you for your time. :)

A:BSOD driver power state failure

Hi -

The bugcheck on the lone mini kernel dump -

0x9f (0x6,,,) = driver in an inconsistant state of power; the power transition timed out waiting to synchronize with the Pnp

The first driver was named the probable cause of the BSOD. They all need to be updated -
[/font] [/code]

Code:

RTSTOR64.SYS Tue Dec 02 01:01:40 2008 (4934CF44) - Realtek USB 2.0 Card Reader

e1y60x64.sys Mon Aug 18 17:45:05 2008 (48A9ED61) - Intel(R) 82567LF-2 Gigabit Network Connection
gwfilt64.sys Thu Apr 10 04:20:29 2008 (47FDCDCD) - Realtek HD audio
SCDEmu.SYS Tue Aug 07 11:19:48 2007 (46B88D94) - PowerISO Computing, Inc.

Realtek HD Audio --> http://www.realtek.com.tw/DOWNLOADS/...&GetDown=false

Realtek USB card reader drivers --> http://www.realtek.com.tw/downloads/...&GetDown=false

Intel Intel(R) 82567LF-2 Gigabit Network Connection --> http://www.intel.com/support/etherne.../cs-029669.htm

Power ISO - see system manufacturer's web site.

Un-install Daemon Tools/ Alcohol 120. The driver common to each has caused many BSODs in Windows 7 systems.

Regards. . .

jcgriff2

.




Windows 7 x64 - Bugcheck 0x9f (0x6,,,)

Code:

Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading ... Read more

Read other 6 answers
RELEVANCY SCORE 98

i have been getting a blue screen of death when i play games. it says DRIVER_POWER_STATE_FAILURE. from my research this generally shows up during hibernation or shutdown. can anyone help?

A:driver power state failure BSOD

  
Quote: Originally Posted by salazni


i have been getting a blue screen of death when i play games. it says DRIVER_POWER_STATE_FAILURE. from my research this generally shows up during hibernation or shutdown. can anyone help?



All of these are blamed on acpi.sys. Can we get your system specs, BIOS version and date so we know what hardware we are dealing with?

Read other 3 answers
RELEVANCY SCORE 98

Hi. Every time I shut down, I'm getting the good old BSOD with the message DRIVER POWER STATE FAILURE. I attach TSF_Vista_Support.zip containing TSF_Vista_Support files and PERFMON.html. System spec below...

Windows 7 Home Premium 32-bit
Previous OS - Windows Vista
System is 8 months old, 4 months since Windows 7 installation
1.4Ghz Intel Core2 Solo
Motherboard: Acer Aspire 4810T Base Board Version
3GB RAM
Controller: Intel(R) ICH9M-E/M SATA AHCI Controller
Display: Mobile Intel(R) 4 Series Express Chipset Family

I hope that covers everything. Any help would be much appreciated as I have no idea what is going on! Many thanks in advance

A:BSOD Driver Power State Failure Win 7

Hello and Welcome to TSF,

From what you are stating here - Do have any external USB devices attached to the computer? were they attached when you reinstalled another operating system?

Read other 4 answers
RELEVANCY SCORE 98

Wondering if anyone can help....

I bought this laptop back in January, and have had this problem, almost as long as I have had the computer. I have zipped up the reports another thread said to zip up and attach. Any help with fixing this problem is extremely appreciated!

System Info:

Toshiba P505-S8980
Running Windows 7 - Home premium if I am correct.

This is getting aggravating, as I use it as a mobile DJ, it hasn't happened on a gig yet, thankfully, but do not want to take a chance of it happening!

Thank you for any help!

A:BSOD - Power Driver State Failure

Files needed are attched to this message!

Read other 2 answers
RELEVANCY SCORE 98

Hi,

? OS: Windows Vista SP2
? 64-bit
? No previous installed OS
? Age of system (hardware) - 2 years, 3 months
? Age of OS installation - have you re-installed the OS? 2 years, 3 months, never re-installed
? CPU - Don't know
? Video Card - nVidia - Display - NVIDIA GeForce 7600 GS
? MotherBoard - Don't know
? Power Supply - Don't know

The problem is sometimes when I want to shut my computer down it takes AGES. After waiting about 20 minutes, it will just BSOD and be fine when I re-boot it. Sometimes, but not as often, after I turn on my computer back from sleep mode it will go very slow for about 20 minutes then just randomly BSOD.

Thanks in advance to anyone that can help!

A:BSOD Driver Power State Failure

Hi -

The BSOD dump shows OS corruption. The likely cause is unknown hardware failure.

Run memtest86+ --> http://www.memtest.org/#downiso
- one stick at a time, alternate the slots

Run chkdsk /r

Run HDD diagnostics

Regards. . .

jcgriff2

.



Vista x64 SP2 - - BSOD BUGCHECK 0x9f (0x3,,,)

Code:

Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\Mini041310-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18160.amd64fre.vistasp2_gdr.091208-0542
Machine Name:
Kernel base = 0xfffff800`0204e000 PsLoadedModuleList = 0xfffff800`02212dd0
Debug session time: Tue Apr 13 21:25:44.807 2010 (GMT-4)
System Uptime: 7 days 0:29:19.048
Loading Kernel Symbols
..........................................
Loading User Symbols
*******************************************************************************
* *
* Bugcheck Analysis... Read more

Read other 9 answers
RELEVANCY SCORE 98

ah.....when i try to shut down my laptop....it just shows shutting down for 5-10 minutes and then.....bang!!!
this BSOD occurs..
and i'm not able to run perfmon /report
it says an error occurred
"can't find path specified"
Help please!!

Also,I can't connect to Internet and control panel doesn't respond on starting..

A:BSOD:Driver power state failure

Skip the perfmon /report and upload the zip file

Read other 4 answers
RELEVANCY SCORE 98

Hello TechSupportForum guys ,

i hope you can help me resolve following issues:

1. ISSUE - DVD ROM DRIVE

My DVD/CD ROM (MATSHITA UJ8C2) powers off on its own each time i start the laptop. I changed options in power management but the problem still persists. Also I am only able to eject dvd-drive, when pressing on eject button on the side of laptop. Ejecting in My Computer doesnt work - DVD RW Drive (powered off) is displayed with single line crossed red circle icon.

Device Manager message today:

Two different messages for DVD ROM Drive appeared after I booted the laptop.

Trasparent icon in device manager:
Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer.

Icon with yellow triangle
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

2.ISSUE - Continueous Dropping of Shared internet connection

For the last couple of days, when I share the internet connection via wifi using cmd line netsh wlan start hostednetwork, the other devices - laptop thinkpad w520 and mobile phones - lose connection after few minutes. I must then turn off/on wifi adapter and restart the batch file with netsh wlan start hostednetwork. However, sometimes the wifi adapter doesnt turn on, so I'm forced to reboot... Read more

A:BSOD - Driver Power State Failure

Update to ISSUE 1 - I tried several times uninstalling driver from device manager and let windows install it back again on reboot, but the problem persists. Today the DVD drive totally disappeared from My computer and in device manager the driver is with yellow triangle...

Read other 1 answers
RELEVANCY SCORE 98

Howdy

So I'm getting the driver state power failure BSOD as well. This computer used to be Vista, about a month ago I put Windows 7 on here. It worked great for like 3 weeks but now its giving me this BSOD every 1-2 days, starting May 7th. It happens randomly - the only constant is that I've had firefox open but I don't know if that really has anything to do with it.

I did look into this before posting here, but it seems like basically everybody's is for different reasons so I'm not sure what to do.

I've attached the latest memory dump file from today.

Any help would be greatly appreciated!

A:BSOD - Driver State Power Failure

dmp points to atapi.sys. Please run a system files check:


Quote:




Open an elevated command prompt and enter sfc /scannow.




Update or remove these old drivers or their respective programs:

Code:
fffff880`0443b000 fffff880`0459f400 RTKVHD64 RTKVHD64.sys Mon Jun 02 06:11:37 2008 (4843C759)
fffff880`02d5d000 fffff880`02d76000 SCDEmu SCDEmu.SYS Fri Oct 31 02:56:21 2008 (490AAC15)
fffff880`04fa2000 fffff880`04ff8000 SynTP SynTP.sys Thu Mar 27 21:15:32 2008 (47EC46B4)
You may also try a repair install.

Please upload any new dmps that might come.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Jonathan\AppData\Local\Temp\Temp1_051510-21528-01.zip\051510-21528-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00ba2730?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02a12000 PsLoadedModuleList = 0xfffff800`02c4fe50
Debug session time: Sat May 15 21:55:53.880 2010 (GMT-4)
System Uptime: 2 days 11:35:38.626
Loading Kernel Symbols
.................... Read more

Read other 1 answers
RELEVANCY SCORE 98

Please assist with a frequent and annoying BSOD, which gives the error stating: "Driver Power State Failure".

Files attached and information below.


? OS - Windows 7 SP1 (32-bit)
? What was the original installed OS on sthe ystem? Win7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Pre-loaded on laptop
? Approximate age of system (hardware) - 2 years
? Approximate age of OS installation (if you know) - 6 months
? Have you re-installed the OS? Yes after hard drive crashed and then replaced with SSD

? CPU - I5 3320M
? Video Card - Intel 4000

? System Manufacturer - Lenovo T530
Laptop

I have also run a Driver Verifier, but don't know where to find what. I did this before the Sysnative APP and the Perfmon reports.

The help is much much appreciated.
Tnx
Doug

A:BSOD - Driver Power State Failure

Hi. . .

You need to update your H5321 gw Mobile Broadband Driver.

The only known source is Lenovo Support - http://support.lenovo.com/us/en

If you can't find a driver update, go into Device Manager and disable the device since you are using your Intel 82579LM Gigabit Network Connection Ethernet for Internet.

Regards. . .

jcgriff2

`


Code:

Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\PalmDesert\AppData\Local\Temp\Temp1_SysnativeFileCollectionApp.zip\SysnativeFileCollectionApp\060115-10795-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?ffffffff`831769d4?

************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18798.x86fre.win7sp1_gdr.150316-1654
Machine Name:
Kernel base = 0x8304e000 PsLoadedModuleList = 0x831985b0
Debug session time: Mon Jun 1 04:14:29.677 2015 (UTC - 4:00)
System Uptime: 1 days 1:34:53.050
Loading Kernel Symbo... Read more

Read other 3 answers
RELEVANCY SCORE 98

OS: Windows 7 Ultimate
? 32-bit
? Age of system: 2~ years
? Age of OS installation: Two Weeks
? CPU: AMD Athlon X2 Dual-Core QL-60 1.90GHz
? Video Card: ATI Radeon HD 3200 Graphics
? MotherBoard: Not sure..
? Power Supply - brand & wattage: HP Part No.: 384019-002 Wattage: input - 100-240V~1.7A 50-60hz. output: 18.5V - 3.5A 65W (I wasn't sure which to put, so I just put everything I saw.)

After installing Windows 7 Ultimate (I had windows 7 RC before, and it ran fine), I've been getting a BSOD at random times that says:
DRIVER_POWER_STATE_FAILURE
0x00000009f

Then it would automatically restart. When it starts up again, usually it says that my system shut down unexpectedly and it asks if I want to search for solutions, but it keeps happening. The only programs that I can think of which are running at most times that these BSOD's come up are google chrome, windows live messenger, explorer.exe and microsoft word. I would appreciate any kind of solution.

A:BSOD - Driver Power State Failure

Hi -

The bugchecks on the 2 dumps -

0x9f (0x3,,,) - driver in an incosistant power state and blocking an IRP for too long a time

The Microsoft MSDL SYM site used to obtain symbol files to identify Microsoft OS componants is unable to ID the NT Kernel in your Windows system. I don't know the reason for this.

Run the System File Checker/ Repair utility -
START | type cmd.exe into the start search box | right-click on cmd.exe | select run as Administrator | type the following:

Code:
sfc /scannow
Upon completion re-boot to allow files in use to be repaired.

SFC general info - http://support.microsoft.com/kb/936212
SFC & the CBS log - http://support.microsoft.com/kb/928228

Validate your Windows OS installation at the Microsoft Genuine Advantage site.

WGA --> www.microsoft.com/genuine

I don't know how you got a 2007 driver for Avira in your system -


Code:

avgio.sys Thu Feb 22 09:57:32 2007 (45DDAF5C) - Avira anti-virus
AGRSM.sys Mon Nov 10 09:56:37 2008 (49184BA5) - Agere SoftModem Driver

There is not much that I can do with the symbol errors present.

I would suggest that you re-install Windows 7.

Regards. . .

jcgriff2

.

BUGCHECK SUMMARY

Code:

*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Mon Mar 15 16:40:53.697 2010 (GMT-4) ... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hello,
I have been experiencing BSODs since I bought this cpu almost a year ago. The time between blue screens can range from a couple of hours to over a month. I use my computer mostly as a gaming laptop and most of the blue screens occur while I game. However, they have occasionally occured while I was just surfing the internet. It is always a driver power state failure blue screen. On to the cpu specs:

Alienware M17x R3
? OS - Windows 7
? 64 bit
? The OS came pre-installed
? The system is almost 1 year old, bought in august of 2011
? Dual graphics card: Intel(R) HD Graphics 3000/NVIDIA GeForce GTX 460M
? Processor: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz, 2201 Mhz, 4 Core(s), 8 Logical Processor(s)

I heard Mcafee could cause blue screens and so I recently deleted it, however I just got a BSOD earlier today with it deleted.

A:Driver power state failure BSOD

48 hour bump

Read other 14 answers
RELEVANCY SCORE 98

Morning, all.

I could use a bit of help--I've been having a number of BSODs lately, and they always relate to a driver power state failure. Doing my own research has not really been as productive as I'd like.

Of note: this really only happens when I open the laptop back up after leaving it alone for some hours (when I wake up, and occasionally when I get back from work). The computer will run fine for about 5-10 minutes, and then I get a BSOD. I'm running Vista, SP2, on a Dell Inspiron 1525--haven't really had any major problems with this before.

I'm attaching a zip of the minidump and the msinfo32 file as I saw requested in another thread. Many thanks for any help!

Best
writingmiles

A:BSOD and Driver Power State Failure

For more specific troubleshooting, please follow the blue screen posting instructions to provide your full reports.http://www.techsupportforum.com/foru...ta-452654.html
Crashes point to your M-Audio KeyStudio device and/or its drivers. It is conflicting with your PreSonus Inspire WDM device and/or its drivers.

-----

Read other 2 answers
RELEVANCY SCORE 98

For some reason, I've started having this problem again, and I can't pinpoint what is causing it. I'm getting the BSOD with the error message "Driver Power State Failure." I've tried certain things to prevent, but to no avail.

Here is my system info:

OS-Vista Home Premium SP2, 64 Bit
This is the original OS on the system
Came pre installed on the laptop
Laptop is about one year old
OS has never been re-installed

Afraid that is all I know, unless someone could tell me how to get other info (motherboard, video card, etc).

Here is the crash dump log (Had to break it into two files). I tried to get the system health report, but I couldn't get it to work.

A:BSOD-Driver Power State Failure

Hello and welcome to TSF.

Bugcheck 0x9F pointing to o2sdx64.sys:
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Devin\AppData\Local\Temp\Rar$DI00.226\Mini101509-04.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18005.amd64fre.lh_sp2rtm.090410-1830
Machine Name:
Kernel base = 0xfffff800`0221e000 PsLoadedModuleList = 0xfffff800`023e2dd0
Debug session time: Thu Oct 15 22:59:50.501 2009 (GMT-4)
System Uptime: 0 days 1:49:51.614
Loading Kernel Symbols
...............................................................
................................................................
.......................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
**************************************************************************... Read more

Read other 6 answers
RELEVANCY SCORE 98

? OS - Windows 7
? x64
? What was original installed OS on system? Vista
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? MSDNAA through uni
? Age of system (hardware) - 18months..
? Age of OS installation - have you re-installed the OS? A week or so.. I did a complete fresh reinstall of Windows 7
? CPU - AMD Turion(tm) X2 Dual-Core Mobile RM-70
? Video Card - ATI Mobility Radeon HD 3400 Series

Blue screen received generally using standby, code 9f.

I tried using the 'verifier' tool but wasnt able to generate a blue screen. The display went black, yet the fan just kept on roaring..

I have tried updating the Atheros driver, as WinDbg was hinting that this was the cause, but without success.

Any help is greatly appreciated
Cheers

A:BSOD - 9f - Driver Power State Failure

Hi -

As the thread title states, the bugcheck on both dumps -

0x9f (0x3,,,) = driver in an inconsistant power state and blocking an IRP for too long a time. Probable cause is Atheros.

Are you running ESET ESS w/ firewall or just NOD32 anti-virus? I see you have ESET newest version v 4.2.40.0, so installation must have been recent. When exactly and do you know if BSODs began before or after new ESET install?

I usually find 3rd party firewalls involved in 0x9f (0x3,,,) BSODs. I myself run NOD32 a/v only on this particular system - not ESS.

Run the Driver Verifier --> http://jcgriff2.com/Driver_Verifier.htm

What is exact model of HP dv5? Look on bottom label. There are numbers after dv5-xxxx. Is HP support where you got the Atheros wifi driver update?

Regards. . .

jcgriff2

.

BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Thu Jun 10 22:04:06.702 2010 (GMT-4)
System Uptime: 0 days 0:11:58.495
BugCheck 9F, {3, fffffa800226a060, fffff80004089518, fffffa8005d10a70}
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
Probably caused by : athrx.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Thu Jun 10 06:50:41.607 2010 (GMT-4)
System Upti... Read more

Read other 5 answers
RELEVANCY SCORE 98

Hello,

I've been getting these BSODs and the error says it's caused by the ntsokrnl.exe. Below are the details of my laptop and I've attached the required reports. Any help is appreciated.

Thank you!

ASUS Laptop model K53E-BR5

- Windows 7
- x64
- OEM
- Age of system: 8 months old
- Age of OS: 8 months old

- CPU: Intel i3-2310M
- Video card: Integrated Intel HD Graphics 3000 video
- Motherboard: Not sure about the motherboard, this is an Asus Laptop with the Bios version: American Megatrends Inc. K53E.216

A:BSOD - Driver Power State Failure

Hi -

What is plugged into USB ports?

Code:
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800714f060 00000000 fffff80002ed07f0-fffffa80029c1220 Success Error Cancel pending
\Driver\usbhub nt!IopUnloadSafeCompletion
Args: 00016600 00000001 00000001 00000006
[ 16, 2] 0 e1 fffffa800700da00 00000000 fffff80002ed07f0-fffffa800ca43120 Success Error Cancel pending
\Driver\usbccgp nt!IopUnloadSafeCompletion
Args: 00016600 00000001 00000001 00000006
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800280a790
Run - http://www.techsupportforum.com/foru...ed-473665.html


Regards. . .

jcgriff2


`


BSOD SUMMARY

Code:
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\041312-15771-01.dmp]
Built by: 7601.17790.amd64fre.win7sp1_gdr.120305-1505
Debug session time: Fri Apr 13 16:28:36.571 2012 (GMT-4)
System Uptime: 0 days 1:10:36.554
Probably caused by : usbhub.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_usbhub.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`0714f060 fffff800`00b9c3d8 fffffa80`0521f860
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\040812-19172-01.dmp]
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Debug session time: Sun Apr 8 23:24:59.031 2012... Read more

Read other 10 answers
RELEVANCY SCORE 98

Hello, this is my first time posting, so I hope I have met all the requirements. I have ran into the ole' BSOD caused by a driver power state failure. Just to bring you up to speed with what I have done thus far...I started with a system recovery after making a second copy of discs, thanks to freedrivecommander, and re-upgraded to 64bit windows 7 ultimate, upgraded from vista, and it started the same problem again. I have tried to use my hp health monitor to check my drivers and the only one it showed needing updating was one for the IR receiver, so I thought no big deal. I attached the dump file but was unable to run the perfmon / report. Any input would be greatly appreciated.

Thanks!!!

Finally found my motherboard info

CPU Core 2 Duo p7350
Motherboard Compal 30F7
chipset GM45/GM47 Rev 7
southbridge 82801m (ich9-m) rev 3
Bios HP F.55 date 10/06/09
Single DDR2 4096b gskill 333mhz
intel 4 seriess chipset

Please ask for anything else I can provide to help...

Thanks for reading and helping!!!

A:BSOD Driver Power State Failure...Please Help

  
Quote: Originally Posted by micahl88


Hello, this is my first time posting, so I hope I have met all the requirements. I have ran into the ole' BSOD caused by a driver power state failure. Just to bring you up to speed with what I have done thus far...I started with a system recovery after making a second copy of discs, thanks to freedrivecommander, and re-upgraded to 64bit windows 7 ultimate, upgraded from vista, and it started the same problem again. I have tried to use my hp health monitor to check my drivers and the only one it showed needing updating was one for the IR receiver, so I thought no big deal. I attached the dump file but was unable to run the perfmon / report. Any input would be greatly appreciated.

Thanks!!!


These were virtually identical and Related to hpdskflt.sys HP Disk Filter from Hewlett-Packard Corporation. I would re-install it (or remove it completely). I am not a big fan of HP's bloatware and remove it at all costs.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\051111-47205-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2... Read more

Read other 7 answers
RELEVANCY SCORE 98

this is happening every day now, can anyone help?

A:BSOD driver power state failure

Hi,
Please reconfigure windows to collect the correct info
You want small memory dumps - "MiniDumps"

http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

And here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

Cheers

Dave

Read other 9 answers
RELEVANCY SCORE 98

Good Morning.

? OS - Windows 7 Ultimate
? x86
? What was original installed OS on system? - win7
? OEM ver.
? Age of system (hardware) - About 4 month
? Age of OS installation - have you re-installed the OS? - About 3 month
? CPU - AMD Turion(tm) II P520 Dual-Core Processor, 2.3MHz, 2 Core(s), 2 Logical Processor(s)
? Video Card - ATI Mobility Radeon HD 5145
? MotherBoard - AMD. 785GX chipset
? Power Supply - Toshiba 100~240V


Sorry I'm not well English. I'm Thai

A:[BSOD] Driver State Power Failure

Hi -

Your Broadcom 802.11n Network Adapter named as the probable cause of several BSODs -

Code:

bcmwl6.sys Thu Aug 19 22:52:32 2010 (4C6DEDF0)

It needs to be updated from Toshiba - http://www.csd.toshiba.com/cgi-bin/t.../jsp/home.jsp#

These drivers need to be updated -

Code:

aspi32.sys Wed Jul 17 11:53:00 2002 (3D3592DC) - Adaptec CD burning - http://www.adaptec.com/en-US/downloads/

TVALZ_O.SYS Thu Nov 08 22:07:46 2007 (4733CF02) - TOSHIBA ACPI-Based Val. driver - http://www.csd.toshiba.com/cgi-bin/t.../jsp/home.jsp#

tosrfec.sys Mon Oct 23 03:32:19 2006 (453C7003) - Toshiba Bluetooth USB Controller driver - http://www.csd.toshiba.com/cgi-bin/t.../jsp/home.jsp#


This driver used by Daemon Tools/ Alcohol 120 is notorious for causing BSODs -

Code:

sptd.sys Wed Apr 07 21:28:24 2010 (4BBD3138)

Remove the offending app.

If BSODs persist, run the Driver Verifier -- http://jcgriff2.com/driver_verifier.htm


Windbg Logs
--> http://jcgriff2.net/BSOD_Logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.net/BSOD_Logs/_99-db...riff2_.txt.zip

Regards. . .

jcgriff2


`

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Mon Oct 18 22:26:55.043 2010 (GMT-4)
System Uptime: 0 days 0:30:06.635
*** WARNING: Unable to verify timestamp for bcmwl6.sys
*** ERROR: Module load completed but symbols could not be loaded for bcmwl6.sys
DEFAULT_BUCKET_ID: ... Read more

Read other 2 answers
RELEVANCY SCORE 98

I get a
BCCode: 1000009f
BCP1: 0000000000000004
BCP2: 0000000000000258
BCP3: FFFFFA80036E5680
BCP4: FFFFF80000BA2740
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
when placing my computer into hibernate state. Also my usb ports cut out after a long time on the computer and device manager stops recognizing all input. I have reformatted the drive and reinstalled all up to date drivers.

Can any one help me please?

A:BSod Driver Power state Failure

Hi -

Please run - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 3 answers
RELEVANCY SCORE 98

Hi,
Just got my new Samsung ATIV SMART PC, preinstalled with Windows 8. After a few days, it begins to crash a lot, with mainly driver_power_state_failure as the cause. Could you nice ladies and gentlemen help me find the solution for this problem? Attached here is my diagnostic files using SF Tool. Thanks before...

A:BSOD Driver Power State Failure

Really need help here, cause i'm thinking about returning this machine ;(

Read other 8 answers
RELEVANCY SCORE 98

I am getting the bsod error driver power state failure. It appears to be random unless i go to play star wars the old republic and it does it with in about 10 minutes of playing every time. This is fairly recent. I was playing it before for several hours with out trouble, and now it does it outside of the game. I hope you can help. Attachment 312126

Attachment 312127

A:BSOD Driver Power State Failure

Hi punkiemi.

How many days ago you installed Service Pack 1? Very recently it seems?

The zip contains two crash dumps. One, the older one is related to games. And, this time the PC was not SP1 installed.

Code:
BugCheck 116, {fffffa80066fb010, fffff8800517e664, ffffffffc000000d, 3}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+97e664 )

Followup: MachineOwner
---------
Taking the age of your PC into consideration, stop 0x116 BSODs may occur under certain conditions.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

The PC seems to be overclocked.

Code:
Max Speed 2300MHz
Current Speed 2310MHz
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Install the NVIDIA DRI... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello All,
I have been attempting to fix a win8 64bit issue on my dell xps600 for two weeks without success. I started the install with a clean install of win8 64bit and found that the BSOD started immediately. I have discovered that restarting the machine works fine and fast without any BSOD. However I get the BSOD when turning on the computer after shut down. I have nothing in device manager that is showing a problem and I've checked all but a few drivers that are old.

I really appreciate your time!

Steve

A:Bsod driver power state failure

Welcome aboard, stevephl.

The crash is caused by Creative Audio Driver (WDM)

Code:
Irp is active with 10 stacks 8 is current (= 0xfffffa8003a48728)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa80024cd880 00000000 fffff8800499fd00-fffffa8003b261b0
\Driver\pci portcls!PowerIrpCompletionRoutine
Args: 00000000 00000000 00000000 00000002
>[ 16, 2] 0 1 fffffa8003b26060 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\drivers\ctaud2k.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ctaud2k.sys
*** ERROR: Module load completed but symbols could not be loaded for ctaud2k.sys
\Driver\ctaud2k
Args:... Read more

Read other 7 answers
RELEVANCY SCORE 98

Hi,

I had a bsod the other day and it said "Driver power state failure" stop 0x0000009f. Can anybody help me?

A:BSOD Driver power state failure

Hi,

BSOD mentions win32k.sys - a Microsoft driver which is probably not the real cause.

So, run the driver verifier to try and get the real cause to show itself.

Driver Verifier - Enable and Disable

Also remove SPTD.sys which is known to cause BSODs; remove Daemon Tools, then use this SPTD installer to remove it (pick the uninstall option when you run the installer): DuplexSecure - Downloads

When you get a few more BSODs then please follow these Blue Screen of Death (BSOD) Posting Instructions exactly.

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Nov 20 12:56:49.103 2010 (GMT+13)
System Uptime: 1 days 12:26:37.883
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
DEFAULT_BUCKET_ID: CODE_CORRUPTION
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 1000009F
Arguments 00000000`00000004 00000000`00000258 fffffa80`03d03040 fffff800`046614d0
??????????????????????????????????????????????????????????????????????????????????????``

Read other 2 answers
RELEVANCY SCORE 98

I performed a clean install of Win 8 x64 from Win 7 x86. I have had freezes or bsods at the Metro screen if the computer sits unattended for awhile or goes to sleep. I have updated the BIOS to the latest version, am running defaults and not overclocked. I think it is a driver issue but I cant seem to track it down. Any thoughts?

A:BSOD Driver Power State Failure (Win 8 x64)

bump? If more information is needed let me know. Thanks. If it's general incompatibility with a piece of hardware I may just go back to Win 7.

Read other 3 answers
RELEVANCY SCORE 98

Hey there again guys! Recently my computer has been giving me a handful of BSoDs lately, claiming to have shut down because of a "driver power state failure". I've done my Google homework on this problem, but none of the forums I've checked were specific to the issues I've been having with my system. They include: updating drivers, deleting certain things and etc, but they all have different stuff on their computer than I have. It's happened to me five times since it started, last week or so. I'd love you forever if you could figure out for me why I keep getting my BSoDs!

I've attached the .dmp file and thank you guys! <3
 

A:BSoD -- driver power state failure

When does the BSOD occur?
I'd start by taking out any add-on peripherals inside your PC. Leave only the required components required to get into Windows connected - motherboard, ram, cpu, graphics card (if neccesary), and hard drive.
If it continues with this setup, i think it may be graphics drivers.
 

Read other 1 answers
RELEVANCY SCORE 98

Hi everyone, have had a huge amount of help from this website in the past and am wondering if anyone can help.

I have a year old Windows 7 Acer Laptop. Has been performing fine, but have had a couple of Blue Screens in the past week, one of which was a "Driver Power State Failure".

Have attached the minidump files to this message. If anyone can help it would be greatly appreciated.

Thanks,
Jon
 

A:BSOD Driver Power State Failure

don't like to bump my own threads but if anyone can help, would be great help.
 

Read other 1 answers
RELEVANCY SCORE 98

Hi

I recently changed the case and added some internal peripherials to my computer. I have a 950W power supply so what I have should not be Bluescreening my computer. I cannot open the ,dmp files to find out what is going on. Can anyone help?

My system:
Win 7 Ultimate 32bit
950W power supply
4 hard drives
2 Super Mulit Optical drives
1 flash card bay
Asus motherboard (that was running fine before I changed cases)
in win IRONCLAD case (4 120 fans, and 1 huge fan)

I am attaching the BSOD for today as a zip file.

A:BSOD with Driver power state Failure

Make and model of your Asus mobo?

Please post the info from this topic: http://www.sevenforums.com/crashes-d...tructions.html

Initial triage suggests a problem with vclone.sys - a component of your VirtualCloneCD driver.
This theory is also supported by the presence of drivers related to it that date from 2002 (ElbyCDFL.sys and
ElbyVCD.sys)
I'd suggest uninstalling it to see if that stops the BSOD's

Also, your Norton shows up in the memory dumps, so I'd keep an eye on that.

PLease remove or update these older drivers. DO NOT use Windows Update or the update function of Device Manager:

Code:

ElbyCDFL.sys Thu Nov 28 09:18:04 2002 (3DE6259C)
- ElbyCDIO Filter Driver
- Driver Reference

dvd43llh.sys Mon Feb 07 13:16:49 2005 (4207B091)
- DVD For Free by RIF
- Driver Reference

ElbyVCD.sys Thu Nov 28 05:43:49 2002 (3DE5F365)
- VirtualCloneCD Driver
- Driver Reference

SI3114r.sys Wed Oct 03 17:45:37 2007 (47040D81)
- Silicon Image driver
- Driver Reference

DRVMCDB.SYS Fri Jul 21 14:20:31 2006 (44C11AEF)
- Drive Letter Access Component of Roxio Drag-to-Disc
- Driver Reference

SiWinAcc.sys Thu Jun 14 20:02:27 2007 (4671D713)
- Silicon Image driver
- Driver Reference

PxHelp20.sys Mon Jul 24 20:18:21 2006 (44C5634D)
- Sonic CD/DVD driver (used by many different CD/DVD programs)
- Driver Reference

DLARTL_M.SYS Thu Feb 08 23:04:41 2007 (45CBF2D9)
- Shared Driver Component of Roxio Drag-to-Disc
- Driver Reference

DLACDBHM.SYS Thu Feb 08 23:05:12 2007 (... Read more

Read other 1 answers
RELEVANCY SCORE 98

? OS -Windows 7
? x64
? Vista x64 original
? Age of system ~ 4yrs
? Age of OS installation - just reinstalled about a month and a half ago
? Q6700 quad core 2.66
? 2x 8800gt
? Asus p5n-e sli
? Power Supply - xion 800watt


the blue screen usually happens after the computer hibernates or something similar. i know it happens alot more than i actually see because i come back to my computer and it will have a recovery message. if theres anything else i need to post just let me know.

A:BSOD Driver power state failure

Are you overclocking - either the system or the video card? If so, please stop until we're finished troubleshooting.

Please check the KB articles about hibernation/sleep at this link: http://www.carrona.org/bsodindx.html#0x0000009F

There are 11 memory dumps
3 different BSOD errors
and 4 different causes blamed (all are hardware or Windows drivers)
This makes a hardware failure a possibility. In particular, you have 4 STOP 0x124 errors - which are usually either hardware or compatibility based. Please follow the instructions for troubleshooting STOP 0x124 errors here: http://www.sevenforums.com/crash-loc...-what-try.html

The P5 series of motherboards tends to have issues with RAM in Win7. Please don't use the Auto setting in the BIOS - rather, visit the website of the RAM manufacturer, get their recommended settings and use them in your BIOS.

Asus doesn't completely certify your motherboard for Win7 - so you may have issues that involve compatibility. Also, in this case, there is a driver present that is a known cause of BSOD's (ASACPI.sys dated from 2005). As there are no Win7 compatible drivers listed, you'll have to download the Vista 64 bit version and install it in Comaptibility mode. Again, this will be at your own risk as there's no guarantee of compatibility.

Here's the link to the page for the driver: http://support.asus.com/download/dow...ge=en-us&os=30
Expand the Utilities section and download the "ACPI driver for ATK 0110 virtual device&quo... Read more

Read other 3 answers