Over 1 million tech questions and answers.

Touch screen no longer works

Q: Touch screen no longer works

After a month of use, the touch screen of my Inspiron 13 5000 series no longer works.
Initially, when I restarted the computer it would work again. But now this doesn't help anymore.
I went to settings > connected devices >device manager > human interface devices > HID compliant touch screen and it says "This device is working properly." I disabled and then enabled again the device but nothing changed.
Is there anything else I should do?

RELEVANCY SCORE 200
Preferred Solution: Touch screen no longer works

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Touch screen no longer works

I'd suggest you uninstall and reinstall touch screen driver:
1. Go to device Manager, right click touch screen driver, and then uninstall. To reinstall touch screen driver, click 'Action' at the device manager taskbar, and then click "Scan For Hardware Changes".

Read other 3 answers
RELEVANCY SCORE 84.8

I've just reinstalled Windows 10 on this laptop and the touchscreen no longer works or is recognized. The device manager does not even list a touch-device under human interface devices, and the settings app reports that Pen & Touch is unavailable. I manually installed the intel chipset and display drivers from the support pages, but it has not made any differences. Does anyone have some insight as to why this might be happening?

Read other answers
RELEVANCY SCORE 84

Hi there, I recently purchased an HP Active Stylus to use with my HP Spectre x360 (HP Pavilion x360 - 13-u151tu). I followed some links online to try and find a driver that would allow the Active Stylus to work (as HP as failed to package native support with the laptop itself). I downloaded some Firmware that others have had success with, and it has unfortunately made my touch-screen unresponsive.  I've system restore to a point prior to the firmware upgrade, however that did nothing. I've also tried to update the driver firmware, but to no avail. (If it's relevant this is the exe output): **************** 1-th Brittle13_FHD_O-film_ID2BE5 Multi-sensor IAP ****************The system cannot find the path specified.Start FW update ProcedureThe system cannot find the path specified.ConsoleIAP ver. 1.43.1.57B4Update chip ...Update chip ...351/351[INFO] IAP Elapsed Time: 25016(ms)Update FW Success (Success= 1, Failed= 0)Delay 3s for ReK...********************* Write Flash Key and ReK *********************ConsoleIAP ver. 1.43.1.57B4[INFO] ReK Elapsed Time: 7719(ms)SUCCESSPress any key to continue . . . Regardless, I need some help restoring the touch functionality of my screen.  Kind regards

Read other answers
RELEVANCY SCORE 83.2

Hi,
I have Dell E2014T monitor attached to Intel NUC. Originally, the base install was Windows 7 64-bit, but due to the automatic updates it was updated to Windows 10. Obviously, it is not possible to revert operating system to Windows 7.
Nevertheless, everything worked correctly until recently, when new updates from Microsoft were automatically installed in Windows 10. Monitor works correctly, but the "click" on the touch screen does not work. Simply saying - I can move windows but cannot press any buttons.
For 100% it is not hardware fault - when attaching monitor to older laptop with Windows 8 both monitor and touch screen works properly.
I learned on the other threads that Dell states that Windows 10 is "not supported" for this monitor and recommends revert to Windows 7.
The question is - is how it can be? As Microsoft no longer supports Windows 7, and Windows 8/8.1 will be no longer supported in a year and 3 months from now, how it can be that Dell has not released any driver for MS Windows 10?
Does it mean that Dell is dropping now all users who bought this monitor?
I can understand that Dell may be dropping old and unsupported operating systems but in this case Microsoft forces all users to migrate to Windows 10, so users have no other choice than to migrate.
Can anyone in Dell take a look at this issue and release new driver for Windows 10?
Obviously, the problem is going to affect ALL USERS OF DELL E2014T MONITOR, on January 2018 the latest, as ... Read more

A:E2014T Touch Screen no longer works properly in Windows 10 after updates

Try installing the Win 8.1 drivers available Here--
www.dell.com/.../drivers
Dell is not abandoning those upgrading to 10, just cannot make new drivers for 10. Win 10 has compatible win 10 drivers for almost all hardware.
Before installing Dell drivers, try updating the ones you have by opening Device Manager and see if windows 10 has a better update.

Read other 1 answers
RELEVANCY SCORE 72

I got the Active Touch pen (the first one) when I got my laptop. I just changed the battery in the pen and now it isn't working. It worked up until now. I've already uninstalled and reinstalled the drivers but there's still nothing. What should I do? 

Read other answers
RELEVANCY SCORE 72

I have been having trouble with my mouse pad for my notebook. If i use the touch screen and move the mouse over a clickable box and use the mouse pad to click it will work.  However I cant right click or move the mouse with the mouse pad.  Really confusing....  So far I have done these stepsI have rolled back the driver - Didnt workUpdated the driver - didnt workUninstalled the driver and went to hp site and installed a driver from there - Didnt workWent into he settings and made sure the double touch feature was clicked - Didnt workUninstalled and restarted - Didnt workReenstalled and restarted - Didnt work Any other options from others I would love to try, Thank you in advance.

Read other answers
RELEVANCY SCORE 64

I have an Envy 23 that was touch/pen capable until only a few days ago.  It now shows "no pen or touch available for this display."  The HID compliant for touchscreen is hidden and cannot install, update, or rollback driver because the hardware is not connected.  I have attempted to rollback Window updates, install Window updates (all), restore to an earlier time when the PC was working with touchscreen, update and rollback drivers, reboot to the manufacturer set up, etc.  I would attempt to calibrate except there is no option for that.  Many of the suggestions require steps that are no longer found on the PC.The onscreen keyboard has even disappeared.   The only suggestions I can find from forums, web searches, and the customer care number is to winkey + X and update the driver in the HID --- No possible since it cannot find the hardware or hardware is not connected.  What hardware?  It is not in the hardware recovery, reboot, search of PC, and I did not buy this separate.  I have looked for calibration options but they do not exist on the PC as far as I can find.I have looked on HP's site for the driver(s) or other options and nothing. Is there a way to get the touchscreen driver, hardware, or whatever is needed fixed?  I purchased this specific for the touchscreen and to lose it kind of defeats the purpose of having it.Thanks 

A:Touch screen is just gone, no longer available on this displ...

Hi @who8mycookie, in regards to the issue, can you please follow the document below and let me know the results http://support.hp.com/in-en/document/c03488148 





I am an HP employee.Make it easier for other people to find solutions, by marking my answer ?Accept as Solution? if it solves your problem.***Click on ?Thumbs Up? STAR to say thanks!***

Read other 1 answers
RELEVANCY SCORE 63.2

The touchscreen only works for a week then I have to install it all over again. When are you guys going to fix this, lenovo its been a problem for over a month now. We want a permanent solution

A:X1 Yoga Touch Screen No Longer Working Even with F...

In response to customer reports of intermittent touchscreen function failure on X1 Yoga (Type 20FQ and 20FR) after resuming from sleep or when the lid is opened or closed, Lenovo has made a solution via touchscreen firmware available via download from the Lenovo Forums.
 
The beta touchscreen firmware can be downloaded from this Lenovo Forums link: https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Yoga-Type-20FQ-and-20FR-Touchscreen-Firmwa...
 
Please provide feedback regarding this beta in the discussion above to assist Lenovo with gauging the success of the firmware.
 
Thank you,
 

Read other 1 answers
RELEVANCY SCORE 63.2

My touch screen is no longer working... doesn't matter if the computer is being used as a laptop or if the screen is rotated and operating (not) as a tablet. In the device manager:- I have disabled, then enabled the "HID compliant touch screen".- I have uninstalled the same and rebooted the computer. I am not seeing any other suggestions on the internet...  

Read other answers
RELEVANCY SCORE 63.2

I had the touch screen on laptop working for years & yesterday, upon logging in, that function was no longer working. Upon troublshooting problem, found that the HID Compiant Touch Screen feature was no longer on drive. I didn't make any changes to my system nor did I download anything. Please help.

Read other answers
RELEVANCY SCORE 63.2

The touchscreen only works for a week then I have to install it all over again. When are you guys going to fix this, lenovo its been a problem for over a month now. We want a permanent solution

Read other answers
RELEVANCY SCORE 63.2

My recently purchased X1 Yoga touch screen has stopped working. Things I've tried to so far: Updating all drivers for BIOS and other devicesDisabling and re-enabling the touchscreen device and Wacom HID device in Device ManagerUninstalling touch screen device and Wacom HID Device in Device ManagerUnchecking "allow computer to turn off this device to save power"Reboot from safe modeRestore Windows to factory defaultFor clarifications the pen is working just fine.  I was able to get the touchscreen back for awhile by uninstalling the Wacom device in Device Manager and rebooting. That fix doesn't work anymore. I'm really frustrated by this - not even restoring windows to factory default fixes the problem. I've looked online for many hours on this issue and pretty much tried everything suggested. Any help would be appreciated! Thanks!










Solved!
Go to Solution.

A:X1 Yoga Touch Screen No Longer Working

Any update on this?  I just got my computer, all was fine.  Ran a windows update and the touchscreen stopped working.  Still works with the pen though.

Read other 9 answers
RELEVANCY SCORE 62.8

Yoga Pro 3 1370 This is an old laptop that I've had laying around. The battery went dead a few years ago and I chose to upgrade. I recently decided to sell it so I purchased a new battery. Everything works perfectly. However, there is a black screen.No Lenovo logo on boot up.Cannot get into the BIOS menu and the screen display.There is absolutely no picture. After reading I tried an external display and discovered the laptop works as well as the touch screen. I wondered if it was a software issue but when I tried to reset the laptop I receive the following message: "There was an issue resetting your PC. Nothing has been changed."This happens when I try to rest from the settings, the recovery button, and the advanced startup menu.I'm sure I could replace the LCD but is it really necessary to do so because the touch screen works?I'm not an expert by any means so my apologies if any of this sounded ignorant. Any advice or suggestions will help!Thanks in advance. 

Read other answers
RELEVANCY SCORE 62.8

My Lenovo Yoga 920-13IKB is a 2 in 1 laptop running Windows 10 Home.  Meaning full Active S Pen and Touch screen.  After installing the Version  1909 update, it's Device Specifications (via Windows Settings) Pen and touch:  No pen or touch input is available for this display.    In Device Manager/Human Interface Devices, no HID Touch screen device or driver is available.  The Wacom Device cannot start.  I'm assuming because Version 1909 eliminated the pen and touch support. I ran a full restore of Win 10 Home (no pen or touch support found), ran a driver update scan via Lenovo.  It identified a "Touch Panel Pen Driver - 10" driver to be updated.  Update the driver and reboot and nothing has changed.  Start the Lenovo Pen Settings App and get a message that the Wacom Pen Driver is required.  Odd, since the Wacom Device won't start as stated above.  Follow the Lenovo Pen Settings link to download the Wacom Pen driver, install it, no change in functionality.  Same process before and after v1909 update with no Pen or Touch support.  It's barebones, no antivirus, firewall, anti-malware to get in the way. The machine came with a HDD partition of drivers but nothing identified as an HID touch screen.   Brett

Read other answers
RELEVANCY SCORE 62.4

WEll. I am an new user of HP Desktop workstation and  recently  I  bought E230t touch screen monitor .And  it  is  not  work as  they said .( May be I am not familier with this modern tech. ) .Can  anyone  help me out ??Thanks  in Advance .ukyaw

Read other answers
RELEVANCY SCORE 62

the touch screen on my xps13 laptop only works on the menu bar at bootom of screen - i feel like this is some kind of choice that has been inadvertently made but i could be wrong - any one have any dieas?

Read other answers
RELEVANCY SCORE 62

SOLVED


Ok so my screen saver wont work. Ive tested it at 1 min intervals and no matter what i do wont work. Change theme, Set power options to never turn off . Nutting helps.

Windows 7 ultimate 64bit.. laptop ..

A:Screen saver no longer works..

Here is a list of whats running.

Read other 2 answers
RELEVANCY SCORE 62

I got my laptop just a few weeks ago, and it came with Windows 10.  Soon afterwards the touch screen started not working, very similar to the posts about the USB device being powered down to save battery (you can find those posts, from Dec 2013 else on this site).
However, I'm on Windows10, with the recent large November public update applied.  In device manager there is no 'USB Input Device' listed under Human Interface Devices.
Further: the System's Settings->About panel the OS is reporting under "Pen and Touch" that "No pen or touch input is available for this display".
So, beyond USB power settings, it seems like I'm completely missing the device driver for the touch screen.
I have applied every driver, bios & firmware update that I can find on the Dell support site.  Nothing fixed things.
Any hints?  Am I looking for a display driver or an input driver or something else?
Thanks!
Dave.

A:Dell XPS 15 (Model 9550) touch screen no longer working.

Same problem here, plus I see an “Unknown USB Device (Device Descriptor Request Failed)” in my device manager constantly appearing and disappearing. Also the touch does not work in the Diagnostic application you can enter via the bios. I don’t know if it should work there, on the 9530 Model it did…
I have the device now for about a week and I think Dell should again be deeply ashamed of what they deliver to their loyal customers.
With the 9530 model they refused to repair the coil whine problem a lot of people complained about. This was really annoying but at least I could work with the device.
The 9550 model has not two issues which really prevent me from doing my work.
As soon as you activate hyper-v the screen starts flickering and the display driver starts crashing.
Touchscreen not working.
We are talking about really expensive hardware here and it’s extremely frustrating when you experience more troubles with a 2.500$ Notebook than you do with 500$ hardware.
And on top of it all they told me today that they could not replace my display because Dell has no replacement parts on stock and they don’t know when they will get them. And that’s exactly what you get when you pay for “Next-Business-Day” “Pro” support.
If the device does not work at the end of the week I will send it back.

Read other 15 answers
RELEVANCY SCORE 62

Win 10, was working for a long time. Sometime in the last few months it stopped. Haven't been able to get it going again.

In System information it says no Touch Input is available.

In Device Manager it shows if you select to show hidden devices, but it says it is not connected. I uninstalled this, but at some point it returned, but now I did uninstall again and it doesn't show.

Everything seems up to date.

Not to keen on doing system reset.

Any suggestion appreciated.

Read other answers
RELEVANCY SCORE 61.6

I have a Dell Chromebook 3120 s/n<Service Tag removed> , the non-touch screen was broken and I replaced it with a multi-touch screen assembly. The touch functions properly but is not backlit and cannot be seen unless held at a certain angle. Any and all help is welcome and appreciated. Thank you

Read other answers
RELEVANCY SCORE 61.6

My HP all-in-one touch screen worked fine when I purchased it and even after I upgraded to Windows 10.  A couple of months ago I noticed the mouse behaving erratically, jumping to the top right hand corner of the screen. Thinking it was a problem with the mouse or keyboard I swapped them over however the problem persisted and got worse. I've tried the UEFI hardware diagnostics test and it showed that the touch screen was barely working around the left, right and bottom edges of the screen. Right now the HID-compliant touch screen driver is disabled as it is the only way I can use the computer without the mouse jumping around. I've trawled the internet looking for a solution but haven't found any. The PC is still under waranty, purchased in November 2015. Good PC apart from this very frustrating issue. Not easy to get hold of HP Support in Australia as I'm rarely home during their open hours. If anybody has any suggestions to fix this issue it would be appreciated. Jeremy  

Read other answers
RELEVANCY SCORE 61.6

Hi, my touch screen works partially. I can scroll with my finger on the screen, but I can not select or double click programs or files. I have alread checked Bios update and also my drivers (HID compatibel toucschreen) are up to date. Anyone has a solution for this problem ? Thanks for your help! Regards,Werner

Read other answers
RELEVANCY SCORE 61.2

My Lenovo solution center recently sent out a code saying my INTEL HD graphics were not up to date. After I updated it (to INTEL(R) Graphics 520) my touch screen stopped working. I looked to see if  my HID complient touch screen setting was turned off after the update, but I found that it no longer in my HDI tab. How do I get this back?


























HID problem.png ?108 KB

Read other answers
RELEVANCY SCORE 61.2

I have a Samsung series 7 Slate, which works great and is really fast with Windows 8. But with one piece of software the touch screen doesn't work, the menu items will light up but nothing happens when you press them. If I use a mouse it works fine and as it should. I don't think it's the software because I also used it on a HP 500 Slate and the touchscreen worked fine on that.

If anyone has any ideas for a solution to this problem I would much appreciate it.

Thanks in advance for any help.

A:Mouse works but touch screen doesn't!

There is a bit of a glitch when using older touchscreen hardware with windows 8.

Nearly all older touchscreen hardware is implemented as an mouse emulator. So when pressing on the screen it simulates a mouse click.

Windows 8 makes use of the touchscreen interface rather than the mouse interface for touchscreens, and the driver it installed for your touchscreen (if it installed one) may not be working too well with the hardware. If you install a driver separately for that touchscreen you may get back the mouse emulation for the touchscreen, but then some of the better options like gestures and sweep scrolling may not work well or at all in windows 8.

So what you really need is a touchscreen driver that is really a touchscreen driver (not a mouse emulator driver) for that model of touchscreen on your slate. If you know the touchscreen manufacturer you can maybe find a beta on their site for Windows 8? Find the touchscreen device in the hardware control panel and look up it's VID and PID to find the manufacturer if the driver page doesn;t already tell you. (There is a website somewhere that'll look up the VID/PID and tell you what the product and manufacturer is)

But.. may be slim chance. If not, try finding the normal windows 7 touchscreen drivers for it, that may help some, though not guarantee it'll be fully functional.

Read other 4 answers
RELEVANCY SCORE 61.2

My wife got a refurbished Yoga 2 not too long ago, and it had some quirks, but I was able to get them ironed out. Now I've encountered an issue I can't seem to figure out.

The machine fires up, but the screen does not come on at all. I hooked up the mini HDMI to the TV, and am currently able to use it as a monitor.

The touch on the screen works, as I can move around the mouse using my fingers on the screen.

I've tried changing settings, check hardware manager (says functioning properly), checked for new drivers, etc.
To my knowledge there are no new things installed or anything of the sort.

Any suggestions on what to try?

Thanks in advance!

Read other answers
RELEVANCY SCORE 60.8

My touch screen has been working fine however the touch screen is no longer working in either the laptop mode or the tablet mode, which of course makes the tablet completely unusable.  I do have the auto install set for upgrades.  I have searched the Forum and the Google web for possible solutions but nothing seems to work.  I have run the "Lenovo Check System for updates" but get a message that the lastest drivers are installed.  Here are my System specs -   System SKU:  LENOVO_MT_81B5_BU_idea_FM_YOGA 720-121KB   BOIS Version/Date:  LENOVO 5GCN29WW, 11/1/2018   SMBIOS Version:  3.0   Embedded Controller Version:  1.24   BIOS Mode: UEFI   OS Name: Microsoft Wiindows 10 Home   Version: 10.0.17134 Build 17134 Need advise to get this working again.  

Read other answers
RELEVANCY SCORE 60.8

I purchased a Lenovo Yoga 730 15" i7 in early August.  For the past couple weeks the screen has started to flicker / go all gray/beige for a few seconds at a time before returning to normal.  On Sunday, the screen went gray/beige for several seconds (longest that I've seen thus far) then went black.  I tried rebooting several times, powering on/off, moving the angle of the screen - nothing worked to bring back the display.  I plugged the laptop into a 4K television via HDMI and the picture displayed perfectly.  It doesn't appear to be an issue with the GPU, at least not that I can tell. Additionally, I updated the drivers to the latest recommended and updated the BIOS to the latest version found on Lenovo's support website.  Important to note, in one of the many restarts that I did after these updates the Lenovo's loading image displayed for a brief second before Windows loaded before going back to black.  This only happened once and I couldn't reproduce it. Any ideas or thoughts as to what happened and how the situation can be remedied?  Thanks!

Read other answers
RELEVANCY SCORE 60.4

Hi All I have Yoga 720 12 IKB ideapad, both touchscreen and fingerprint stopped working after aupgrading windows 10 pro. However, I was able to restore the fingerprint functionality but not the touch. When I took the laptop to one of the Lenovo agents in Kuala Lumpur he noticed (Which i did not notice before) that there is a Yellow box around the screen where the touch is working only out of the box and does not work inside this area. He asked for replacing the screen with just 1 month warranty which I simply refused. Any support here? 

Read other answers
RELEVANCY SCORE 60.4

Hello. My touch screen stopped working a few months ago and I have decided to see what I can do about it to fix it.My pen/stylus is still works, but touching the screen won't do anything. Here's what I've tried so far:I have tinkered with the Device Manager (disabling/re-enabling HID-compliant touch screen)I have checked for driver updatesI have run Lenovo Vantage's Hardware Scan (which doesn't check the screen as far as I know anyway)I have done a driver scan through Lenovo's website, which prompted me to do a BIOS update (which didn't fix my issue)I have run Windows 10 Hardware and Devices TroubleshootingHelp is appreciated. Thanks.

Read other answers
RELEVANCY SCORE 60.4

My touch screen stopped working for fingers but pen is still working.  Tried to disable touch screen in HID (Device manager) - no luck Everything seems to be up to date except Intel SGX which I unsuccessfully tried to update through Lenovo Vantage. Don't know if it matters. Help Please!

Read other answers
RELEVANCY SCORE 60.4

Hi, March of  last year (2016) I bought the Lenovo Ideacentre AIO 700 24" mainly because the clerk at BestBuy told me I could draw right on the screen with a stylus and that was not just on Sketchbook Pro 7 (bundled in) but with any drawing program. I called Lenovo at that time, they said the same thing.  I put it away as I had projects to complete and now have it set up, bought a Wacom Intuos Pro Paper Edition, which is great, but that stylus doesn't work on Sketchbook, or anywhere on the screen. Neither does my old little Bamboo Tablet's stylus. Wacom says, Oh, sorry, try another maybe. Lenovo said, only Wacom, then they realized my warranty or whatever had expired two weeks ago and wouldn't continue the conversation, stating if I were to purchase a new year, they could talk to me further, otherwise no. Nothing works and I cannot find any info....so here I am.Is there the functionality of drawing on my screen with a stylus of any kind at all? I know many are available but Wacom's are not compatible, and though I love my desktop, every reason I got it and the new $549.  Wacom Intuos Pro Paper Edition (great product) and all I actually wish to do is draw with a stylus on this screen. No info online, maybe there's an expert here!

Read other answers
RELEVANCY SCORE 59.6

I have searched a few hours for possible solutions and also installed the "touch firmware update." I have disabled and enable HID touch screen. They did not work. The touch screen with finger stopped a couple of days ago. Why the pen still works? How do fingers and pen work differently? Anything else I should try to make it work?  Thank you!

Read other answers
RELEVANCY SCORE 59.2

I have a 1 year old Lenovo 750 15IKB. Touch screen stopped working a week ago so I cannot use my finger to work on it. The pen works well. I have tried everything possible. A couple of days ago the HID Compliant Touch screen disappeared from the Device Manager. Does anybody have a solution for this?  Thanks 

Read other answers
RELEVANCY SCORE 59.2

Hi all, I got this machine new and the symptom happened about 2 months ago. I tried disable/enable, reinstall driver, without change. Besides hardware scan shows nothing out of order. I checked here and found two relevant posts, whose solutions all point to hardware problem (Replacing screen and "LCD CROSS LINE SHORT"). So, before convincing myself that I also get a faulty device and need to have it repaired (I still have warranty), is there anything else I can/should check? Thanks!

A:X1 Yoga 3rd gen, LD20CTO, touch screen not working, active pen works. What to check?

There are 2 separate digitizers and it is certainly possible that one (static discharge digitizer for finger touch) has failed and that the Wacom device for the pen is still fine. Get it serviced.

Read other 1 answers
RELEVANCY SCORE 58.4

Yoga 13 - touch screen works fine when installing windows 10, but not working after installed, starting from the reboot configuration... There is "HID compliant touch screen" in device manager. I am confused...

A:Yoga 13 - touch screen works fine when installing windows 10, but not working after installed

 

Read other 1 answers
RELEVANCY SCORE 58

Thinkpad 13 Gen2 touch screen works fine when installing windows 10, but not working after installed, starting from the reboot configuration... There is "HID compliant touch screen" in device manager. I am confused...

Read other answers
RELEVANCY SCORE 55.6

Touchscreen recently stopped working, went through troubleshooting, and HID-compliant touchsreen, is no longer in the drivers list for me to update, enable or disable.  anyone know where i can download the driver or where i need to go for an update or somesuch.

Read other answers
RELEVANCY SCORE 52.4

So I have a small 10" touch screen  as a secondary screen and it is recognized and installed when I plug it in the computer.My problem is that the actual touching is severly misplaced and I can not use the calibration tool (Tablet PC Settings in control panel) to correct this problem.It is as if the vertical and horisontal inputs of the screen has been swapped. If I touch the right side on the screen and drag my finger to the left I can see the cursor go from the top to the bottom and if I touch the top and drag down the cursor goes from the left side of the screen to the right side of the screen.Installing the drivers from the manufacturer of the touch controller, http://www.eeti.com, did not help at all. It just says there are no touch controllers connected to my computer.Is there a way I can correct this problem?

Read other answers
RELEVANCY SCORE 52

Yoga thinkpad 20cd. I have the original stylus that came with the lap top as well as an aftermarket LIfebook stylus. The screen doesn't register either stylus. When i go to the windows pen calibration the stylus works fine. The calibration consists of tapping targets with the stylus pen. It is very accurate. Soon as i close the calibration window the stylus doesn't interact with the screen at all. I assume I must have changed some setting by accident or it occurred with an update. The stylus use to work a few months ago. I have tried messing with my display settings to remove the adaptive brightness at one point and may have selected a wrong setting. Thank you for any help provided. 













Solved!

Go to Solution.

A:Touch screen not responding to stylus only finger. But in stylus calibration, the stylus works fine.

SOLVEDOpened Wacom Pen and restored to default settings. started working again. Never have opened Wacom pen before, not sure why that worked. 

Read other 1 answers
RELEVANCY SCORE 51.2

Can we replace the capacitive touch controller or is it fixed?

A:Can one capacitive touch screen be replaced by a resistive touch screen?

Can you please provide more details?
What device do you mean?

Read other 2 answers
RELEVANCY SCORE 51.2

Hello! I'm wondering why my laptop does not have touchscreen when that's what I ordered? Thank you! Model: HP Pavillion 15t AU020wmWindows 10 HomeVersion 1607Build 14393.187Product ID 00325-80721-64798-AAOEMProcessor: Intel Core i5-6200 CPU @ 2.3GHz to 2.40GHzRam: 8GBSystem Type - 64-bit operating system, x64 based processorPen and touch: No pen or touch input is available for this display I'm really bummed about this when I orderd the one with a touch display. Is this an error on your end for shipping me the wrong model?

Read other answers
RELEVANCY SCORE 51.2

I have a hp pavilion touchsmart 15-n029so. Unfortunately my touch screen is defect, so 5-6 points on the screen is constant active. Until recently I managed to disable the driver for only the touch driver (not the screen) through device manager, but then a lately update for windows 10 activated the driver again. So now the 5-6 points is constant active, and I cannot login because the screen will not focus on the login field.  This means I cannot login to windows 10. I have also tried to start safe mode (turning off computer repeatly, so it starts up in safe mode), but here the touch screen driver is also active.  How can I disable the touch screen driver without login into windows 10?  

Read other answers
RELEVANCY SCORE 50.4

I have a msi cr600
symatic or something like that

ever since the most recent update my
touchpad stopped working, its no longer installed actually.

if I roll back its working but that's kinda annoying to do every day.
I have it set to ask before updating but it never asks.

I would really like to be able to use my touch pad.
I build computers but I am not really in the whole programing and all that stuff, that's my bf's job. he's away for the week and this is annoying.

thanks I will answer any questions to make this easier.

also this is not an fn prob

A:touch pad no longer working

The way to fix the problem is to remove the drivers the updates installed and have windows install the default drivers again so then you won't have to worry about it reverting to the "updated drivers". In Programs and Feature under control panel make sure you remove the Synaptics driver if there is one, and also in device manager under control panel click "Human Interface Devices" and uninstall any touchpad devices it may list by right clicking on them and uninstalling also click the box which says to remove all the device files or whatever. After thats complete reboot and windows should resync itself and load the standard working drivers again.

Read other 2 answers
RELEVANCY SCORE 49.6

Normally when I adjust sound in Vista a graph appears on screen.
This is no longer happening.
Sound System is Realtek, the original programme that came with the laptop.
 

A:Solved: Realtek On Screen Graph No Longer No Longer Working.

Solved!
A box for Wistron had been accidentally unchecked in startup menu.
 

Read other 1 answers