Over 1 million tech questions and answers.

VPN and Terminal Server Client

Q: VPN and Terminal Server Client

I'm trying to use a VPN connection with a remote server. I need to extract data from a server that needs this connection for security purposes. The only way to run the software on this server is to use a terminal server client connection. I'm using WIN XP, but the server is running NT 4.0 Terminal Server edition. Once I open up the terminal server connection, the VPN connection will not connect. Now, reverse logic, if I open the VPN connection first, the terminal server client connection will not work. Is there a way to have both open at the same time with the OS's I have currently? Or is there something I need to change to get this to work?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: VPN and Terminal Server Client

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 81.6

I'm looking at setting up windows 2003 terminal servers all over the place to replace the awful thing people are currently doing here - vncing servers with one small shared password among everyone <holding my hands over my ears for the backlash>. Don't blame me, it's another awful legacy I have to get rid of...

1. I've got to set up a Terminal Server Licensing server and was thinking about putting this on my second domain controller. I was wondering what would happen in this server dies, though. Is there some way of having resilience in this scenario? Perhaps a second Licensing server or something, the way you have 2 or more Domain Controllers?

2. Also, I know that Windows XP has an RDP client, I've used before on many occasions, but what about all the Windows 2000 clients that I still have out there. What should I do for them to access the new Terminal Servers?
 

A:Terminal Server license server(s)? RDP client for Windows2K?

I'm not 100% sure on #1, but I believe that the TS licensing becomes integrated into the AD, so if one DC goes down, the other one will be able to check licensing. On another note, if you are using the TS for administration only, I don't believe you needs the TS Licensing to be installed.

For #2, you can download the latest version of the RDP client from MS's website. It should also be available through Windows Updates, although I think Win2K isn't supported any longer, other than Critical Updates.
 

Read other 1 answers
RELEVANCY SCORE 80

I have a NT Terminal Server 4.0 set-up with Microsoft client, as well as, Novell client. I can logon to the Administrators account just fine. When I log-on using someone else, I get an error stating that the logon script didn't take effect.
-An application error has occurredand a log file is being generated "nwlscrpt.exe"
-Then it looks for DrWatson log file directory and doesn't find it
-"Cannot open DrWatson log file
-"Windows NT error code=0

What do yo think this might be??
 

A:NT Terminal Server w/ Novell client

I think you should reinstall the client... Or isntall the ms novell client. That works for me.
--Adam
 

Read other 1 answers
RELEVANCY SCORE 78.8

I have the following:

Terminal Server 4.0 running an application called CLASS

100 seperate users are located at a remote sites, connecting via a WAN Router.
Users running Terminal client. Connects to Terminal Server, and runs
class. Each wants to print to a local printer from Class.

How to configure Terminal Server so that I can print from the terminal
server to my clients' printer, without mapping the printer at the Terminal
Server. In other words, I want to print to my clients local printer.
 

Read other answers
RELEVANCY SCORE 78

This problem has been bothering me for months, every so often client session hangs for about 10 seconds. If you using the mouse it just freezes and if your typing it will stop and continue after the pause. I've tried changing some settings like maximum throughput for network apps and changing application performance to none. But that didn't affect it. Has anyone else run into this problem?
 

A:{Resolved} - NT Terminal Server client session pausing

They just posted a knowledge base article to reference this problem.

The Knowledge Base Article for Microsoft is Q250042 Performance Issue and Delay in Keyboard Input. My experience throughout the TS world is a lot of TS administrators have run into this problem. Microsoft has a hotfix for this problem which will be run tonight. And is supposed to be fixed with the release of SP 6 for TS, which will not be released soon. I hope this helps alot of you out there.

[Message from Reuel: Just making the Knowledge base article a hyperlink to the article. Thanks for telling us about it]

[This message has been edited by Reuel Miller (edited 03-02-2000).]
 

Read other 1 answers
RELEVANCY SCORE 78

Some WIN 7 users (me for one) seem to have this issue after latest windows updates installed on 09-06-2016 (latest KB installed: KB3156017) when trying to open a terminal server connection: the current user and "use another account" option is displayed
twice. This is a company domain setup and updates are installed via WSUS.
Is this some kind of registry setting?

Read other answers
RELEVANCY SCORE 63.6

i have the server with windows 2003 SP1 and i executed replication active directory, domain controller on the new server, as i have two servers. all expect one client computer work ok.onthe problematically computer is with the windows me.
problem is:
when i shut down old server,the computer with win me drop out from domain and he don't see new server.when i power on old server the client computer work ok.i deinstalled the win me on this computer and i installed to him win xp pro but problem is same. this computer don't see new server and he don't see others client computers in network.
what i do?
i tryed to make new user account but nothing i can't because of this computer don't see new server.
on client computer light green indicator on network adapter (Realtek 8139d) all the time.
i use commands: ping with the ip address of server, with the name of server nothing, ipconfig /release, ipconfig /renew, ipconfig /flushdns, ipconfig /registerdns.

ip address of old server is 192.168.0.100 and new server 192.168.0.101.
maybe problem is when i type ipconfig in dosprompt on new server
i receive: DNS server 192.168.0.100 and DHCP 192.168.0.100

plz help me thanks
 

Read other answers
RELEVANCY SCORE 60.4

hi,
does anybody know how to prevent terminal services client from getting timed out ??
thanks
 

A:terminal services client

Go into the 'Administrative Tools" folder of the Term. Server, double click on "Terminal Services Configuration" icon. Now, highlight "connections" on the left, then right click on the RDP connection that you want to configure on the right. Right click the RDP connection...go down to properties. On the pop up window, click the "Sessions" tab....now look down just a bit and put a check mark in the "Override user settings" check box. Go down to where it says "Idle session limit" and select your timeout preference from the drop down list, and click O.K. to close the window. The new setting will not affect any currently active session....just new connections. The currently connected users will get the new settings the next time that they log in.
 

Read other 2 answers
RELEVANCY SCORE 60.4

I am using UltraVNC to remotely connect to all of out work computers while I am on the road.

I got that working great, except it is DOG SLOW.

So I was poking around the net and have started reading alot about Terminal Services in the Windows OS.

Well I have tested it out internally and it runs MUCH faster.

I have tried to find information on the following issues but cannot seem to find anything.

1) How do I connect via the internet to each computer. I assume a domain name type of setup. The question is what port numbers does Terminal Services use so that I can forward them in the router to each computer.

2) Security - Is it secure from the start? Are there different encription methods I can use?

3) Firewalls - I assume as long as I setup the appropriate rules in my firewall, all should be good that way...am I correct?

4) Any issues I am not mentioning that I should know etc?

They are all XP Pro Machines.

Thanks.
 

A:Terminal Service Client help

Read other 10 answers
RELEVANCY SCORE 59.6

We have someone setting up a network for us and they are providing a pentium 1.8 server with 2 gig ram and then connect 12 workstations to the network.

They want to sell us all the hardware but I think some of thier prices are to high.

We want to provide our own workstations and monitors as they were initially just going to sell us used 166's for the workstations. We are just going to be view contracts and text so I figured our workstations could would not need to be very powerful. Now they tell me that each workstation has to have a least an 8 meg video card. I figured they just said that because they want me to buy from them. Don't you think I would just need a pentium 166 + with a network card? I can find them for less than half of what this vendor wants for faster machines but most have 2 - 4 meg onboard video.

Perhaps its too broad of a topic but I didn't think we would need 8 meg video to view microsoft office docs?

Thanks for any comments
 

A:thin client/terminal question?

What are you using for your thin client? What OS is going on the server? I've ran a Citrix thin client environement for the past 5 years and we've had PCs with 486 processors, no hard drives, 1mb video cards and we had no problems working with M$ office docs.
 

Read other 2 answers
RELEVANCY SCORE 59.6

I have Terminal Services running on my Win 2K Advanced Server box at home.

I have the Active Client running on a webpage and am able to log into my box without problems from every location EXCEPT one of my workplaces.

I know (am asuming...) it must be some sort of security setting that is stopping me from running the ActiveX control. I never get presented with security certificate asking if I want to trust content from Microsoft.

The machines here are all running 2K Professional, and I am in the "Users" group.

We have an admin that is very inexperienced, and while he is willing to give the permission, he does not know whick permission it is that is denying me. We are currently locked down to the state where we can't even open the "Date/Time" options.

I really don't think it is the obvious IE Security options from Internet Tools which is affecting me, because I am able to alter those, and they make no difference.

Any ideas?

And if I posted this in the wrong forum, I apologise. I thought that this was the most appropriate place for it.

Thanks

[email protected]
 

Read other answers
RELEVANCY SCORE 59.6

Can you help?

I am working in a Domain Environment with a number of Group Policies controlling Internet Explorer. We are having an issue with an ActiveX control running as a standard user.

The ActiveX control is the Microsoft Terminal Services ActiveX (MSTSCAX.dll) the website is working as an Administrator, however when a user logs in the Manage AddOns icon appears at the bottom and the ActiveX does not load.

The ActiveX Control CLSID has been added to the PreApproved section in the Registry and the control is showing as Enabled for all users.

Any advice would be greatly appreciated

Regards

Read other answers
RELEVANCY SCORE 59.2

Hiya

By adding an additional server to your Microsoft® Windows® Small Business Server 2003 network, you can enable Terminal Server. Using Terminal Server, you can host your users' desktops. This can save your organization money by allowing you to extend the life of your desktop hardware.
After you have installed Windows Small Business Server 2003 and have completed the To Do List, you can join an additional server to your network and configure it as a terminal server.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word or Word Viewer
http://www.microsoft.com/downloads/...45-57ef-43eb-802f-f274fd937400&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 59.2

I don't know if this is help for our server or Excel I am looking for. Here is the issue...

Whenever one lady is logged into a session on our server, she opens a word document that has an Excel worksheet embedded in it. The second she tries to click on the Excel worksheet, Dr. Watson makes a call and hits me with the following message...

Error in Excel.exe
Access Violation (0xC0000005), Address: 0x304632a3



When she tries to just open the Excel program, she gets this error:

Compile Error in Hidden Module: ThisWorkBook

This only happens to her, should I make a new profile on the server for her? Is there something in Excel I can do? I am so lost and MS Knowledge base has been of no help to me.
 

A:Excel Shutting Down on Windows NT Server (Terminal Server, Citrix Metaframe)

Try this, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q169718

And this, http://support.microsoft.com/default.aspx?scid=kb;en-us;Q172211

Or look here for more, http://search.support.microsoft.com...Type=ALL&maxResults=150&Titles=false&numDays=
 

Read other 2 answers
RELEVANCY SCORE 59.2

I installed remote desktop on my 2000 client but i still cant log iinto it from my xp pro box. I can however log into my xp pro desktop from the 2000 pro client . I also notcied that terminal services is running on the xp box but its not available on the 2000 client. Is there a solution to this?
 

A:how do you load terminal services on a win 2000 pro client

Read other 11 answers
RELEVANCY SCORE 59.2

I have a thin client and every time she starts her client it automatically loads a seesion with the terminal server and loads the profile from the previous user. she must logout and then log back in and all is fine - where in thin clients would this session be starting from - I checked the startup groups and the RDP connection is not set to automaitcally run Im confused
 

A:Solved: Terminal Services Client PRofiles

Ok I found it - they had default RDP connections in their startup folder locally
 

Read other 1 answers
RELEVANCY SCORE 59.2

hi, i have a system whit a lite version win7 ultimate. from the lite version the remote desktop connection terminal client was remove. there is any way to install it now .?

A:windows 7 ultimate rdp terminal client install

What is a "lite version" of Windows 7 Ultimate?

Where did you get it?

Read other 1 answers
RELEVANCY SCORE 59.2

does anyone know where to get this particular client? It seems MS doesn't offer it anymore and the download they do offer doesn't seem to be the correct one.
 

A:Terminal Services Client (High Encryption)

Is this what you're after, Rockn?
 

Read other 1 answers
RELEVANCY SCORE 59.2

Hiya

Microsoft Windows Terminal Server lets users run Windows®-based applications on a remote computer running one of the Windows Server 2003 family of operating systems. This white paper contains testing methodologies, results, analysis, and sizing guidelines for Windows Server 2003 Terminal Server. Hewlett Packard working in cooperation with Microsoft to perform the initial sizing tests and data collection in HP labs. Microsoft performed the final round of testing and analysis collection using Hewlett Packard equipment. The tests were performed using Windows Server 2003, Enterprise Edition, build 3790.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word
http://www.microsoft.com/downloads/...63-7c42-4372-ab37-d8c8987a71da&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 59.2

Cannot access windows updates, any admin tools, av websites., cannot run spybot, internet explorer giving security settings warning, cannot change any of the settings.

HJT log file:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:08:50 PM, on 6/15/2011
Platform: Windows 2003 SP2 (WinNT 5.02.3790)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\Documents and Settings\administrator.#domain#\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Trend Micro\AMSP\coreServiceShell.exe
C:\Program Files\Trend Micro\UniClient\UiFrmWrk\uiWatchDog.exe
C:\Program Files\Trend Micro\AMSP\coreFrameworkHost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Trend Micro\Client Server Security Agent\tmlisten.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\rdpclip.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Broadc... Read more

A:Server 2003 Terminal Server cannot access admin tools

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you... Read more

Read other 2 answers
RELEVANCY SCORE 58.4

I've been having a lot of trouble with this and I hope someone here can shed some light on this for me...It's driving me crazy! Thanks in advance for any suggestions!

We're using Windows 2000 Server in Terminal Server/Application Server mode. the Clients are Win98 boxes. Every so often, (once or so every 2 to 3 months) all of a sudden, All the Printers will disappear and a reboot seems to be the only way to get them back. I've tried restarting the Spooler with no effect. I've gone to Microsoft's site and been unable to find anything on the topic.

Last time this happened my System Log was full (could this cause that?). The last entry was:

Event Type: Warning
Event Source: Print
Event Category: None
Event ID: 2
Date: 5/27/2004
Time: 1:41:35 PM
User: NT AUTHORITY\SYSTEM
Computer: NICO2
Description:
Printer hp LaserJet 1300 PCL6/DEB/Session 2 was created.

In addition to this error message in the Sys Log, I also receive the following two errors frequently and they were also the first two entries in the Sys log after rebooting:

Event Type: Error
Event Source: Print
Event Category: None
Event ID: 31
Date: 5/27/2004
Time: 1:41:57 PM
User: NT AUTHORITY\SYSTEM
Computer: NICO2
Description:
PrintQueue CN=NICO2-Generic / Text Only could not be created under Container LDAP://NICO1.nico.local/CN=NICO2,CN=Computers,DC=nico,DC=local because Mandatory properties could not be set. Error: 80070005

&

Event Type: Error
Event Source: Print
Event Category:... Read more

Read other answers
RELEVANCY SCORE 58.4

The answer to this might be a call to MS licensing........

I have a 2k server that has recently been wiped and reinstalled from scratch.

I deactivated the Terminal Server licensing ok and then reactivated it ok.

The problem I am having is with the clients. W98 clients are only getting a 90 day temporary license.

This would lead me to believe that the license isn't activated but when I try to activate it, Microsoft says that it has already been activated. Do I need to call them and have them "reset" the client licenses somehow?

On the server is there a way to delete the entry for that client?

On the client I tried deleting the registry entry under MSlicensing but still no luck.

TIA -
 

A:Win2K Terminal Services client licensing not activating

I ended up calling MS. They reactivated the licenses. Once the license has been activated it doesn't automatically reset with Microsoft. They have to manually reset.
 

Read other 1 answers
RELEVANCY SCORE 58.4

Hiya

The Terminal Services Advanced Client (TSAC) is a Win32®-based ActiveX® control (COM object) that can be used to run Terminal Services sessions within Microsoft® Internet Explorer.
Overview
The Terminal Services Advanced Client 5.01 Pack: RDP client with high encryption (128-bit) is no longer available

The new version of tsmmcsetup.exe can be found in the Windows Server 2003 Administration Tools Pack.

tsmsisetup.exe is replaced by the current Remote Desktop Connection software download package Once this package is obtained Administrators can extract the MSI package (msrdpcli.msi) by typing "msrdpcli.exe /c" at the command prompt.

tswebsetup.exe is replaced by the Remote Desktop Web Connection package.
System Requirements
Supported Operating Systems: Windows 2000
http://www.microsoft.com/downloads/...d8-9abc-4e15-a78f-eb2aabad74b5&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 58

I need to make the server's D: Drive appear to the client as the C: Drive.

The server's C: Drive is for system files.

The server's D: Drive is for everything else.

I want to install educational software on the server so that students using TS can access the software from their TS clients. (Note: the licensing issues are already resolved)

A lot of old and/or badly designed software assumes that the installation is on the C: Drive, and allows no deviation from that. I could simply install the badly-designed software on the server's C: Drive, where all of the system files are located. But, AFAIK, Hell hasn't frozen over - and I am not going to invite trouble by letting rogue software work its magic on the system files.

I haven't been able to find what I need on the 'web, or in MS documentation. Surely this is feasible with Terminal Services, given that Citrix had this functionality 10 years ago. MS is usually only a few years behind Citrix when it comes to features.

As an aside, for a couple of years I used "virtual drive" software that functioned as a sort-of-jukebox for serving up programs. When it worked, it was great. However, its database was easily corrupted and was a constant administrative headache.
 

Read other answers
RELEVANCY SCORE 56.8

pretty well much as the title says, its one of my more favorite tweaks that confuse hackers because i have no need of lan, if i need to share files i use ftp... that said what i want to do it on is a 2k3 server where i need remote desktop access, i have a high suspicion that the answer is yes and well might not go for it or go for something like real vnc

but real vnc is from spyware origins and even though now days they have converted over to the light and now is widely used it still makes you wonder....
 

Read other answers
RELEVANCY SCORE 54.8

Can I add terminal server role to my domain controller? The domain contoller only holds the files of the folks in the active directory. No databases run on this computer.
As of now the DC will only allow just the two administrative log ins and I have setup the terminal services licenses for 150 users on another computer in the domain.

Thanks.
 

A:Terminal server

Read other 10 answers
RELEVANCY SCORE 54.8

Location One :--- Head Office

I have one Terminal Server which have local IP Address as what I am using the IP range in company. IP Address of the server is configured in my SGS Firewall and is linked with Global IP Address.

Location Two :--- Ware House

I have one computer in warehouse which is using Dialup connection to connect with the Head office to access one folder.

Please Help :---

How can I connect warehouse computer with this terminal server through Dialup.
 

A:Please Help Terminal Server

start with this ms article
 

Read other 5 answers
RELEVANCY SCORE 54.8

This morning i am having issues with my company's remote site connecting to our server. I have a facility here and everything is fine. The Remote site there are three machines. They have been connecting for years and this morning nothing. They get online but can not connect via RDP. Just errors out, can not connect. I can connect from home just fine. Oh and heres a weird part. The vista machine can connect but two xp machines cant. HELP!
Thanks
Steve
 

Read other answers
RELEVANCY SCORE 54.8

Hi all,
My task is to allow my accountant access to my MYOB files. He tells me his clients usually do it through Windows Terminal Services (which I guess is the Terminal Server software). A few questions to start: How do I find out if its been installed; how do I enable it? and how do I get into the configuration of it? I'm new to this one but Ive got Logmein and XPUnlimited to work in the (distant) past ....
The other totally newbie question I have is .... Once its setup, what does the person that wants to connect to my machine do to connect?
Thanks
T.
 

A:XP and Terminal Server

XP does not have Terminal Services; TS is available on Windows Server versions only. Instead, XP has a part of it called Remote Desktop. Certain versions of XP can act as a Remote Desktop server.

What are MYOB files, and what type of access does he need? (Meaning, what is he doing with them?)

BTW, which version of XP do you have?
 

Read other 1 answers
RELEVANCY SCORE 54.8

now that i have all my users logging in remotely to the terminal server, they are filling up the c drive and it is having problems. how do i get the users info not to be housed on this drive? I want all the users to use the f partician.
All info has been greatly appreciated!
 

A:Terminal server

Read other 10 answers
RELEVANCY SCORE 54.8

Hi all hope someone has an idea because I am clueless.
helping out a Real estate office, they have Windows 2000 server which shares files and has a few apps, and runs terminal server for about 25 on and off users. The server is bogging a bit at the terminal database program, so i figured adding a second 2000 server to ease the terminal services load made sense. Also thought why not make it a bdc as well, good backup, but use the bdc for terminal services, double duty. My 30 or so accounts with settings already created so makes sense.

I installed the second machine, added it and promoted it to 'seconday server'. Within 10 minutes my users are populated from the pdc in user manager, beautiful. Except I can't log in to the bdc at all with anything but 'administrator". Whether through terminal services, or right at the console, any account other that administrator fails. "The system could not log you on, be sure username and password are correct" etc.

Am I missing something? Can I do what I'm trying to do?

Any help or clues would be appreciated!

Thanks all
 

Read other answers
RELEVANCY SCORE 54.8

Think I probably know the answer to this, but worth a shot.

I've got a bit of software that I've loaded onto our server and would like to be able to be accessed by people logging in.

When I run the application, it comes up saying that it can't be run on Windows Terminal Server.

Is there any options that I can adjust to enable this or will it simply not run?
 

A:Terminal Server

Probably not.... it usually helps to mention the software name though.

If it expressly says it won't run on terminal server then I highly doubt it will.
 

Read other 2 answers
RELEVANCY SCORE 54.8

I am setting up terminal services using windows 2000 server. Does anybody know of any good texts or documentation is on how to do this. I have some bits and pieces form all over the place but I thought somebody here might be able to better direct me.

Thankyou in advance
Shukran
 

A:Terminal Server

Here's a pretty good site: http://windows.about.com/cs/terminalservices/
 

Read other 1 answers
RELEVANCY SCORE 54.4

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 54

I am trying to get Office XP Pro to work using terminal services. The problem is when my users log in and try to access an office application they get an error:

"Only Administrators have permissions to add, remove, or configure server software during a terminal services remote session. If you want to install software on the server, contact your administrator."

I also get two errors in my event log. I have attached screen shots of the errors. The only thing I know for sure is that it is some sort of permissions issue. If I add the users in question to the local admin group on the server the errors stop.

I have been online and researched this until my eyeballs have fallen out but have had no luck. Any help would be greatly appreciated!

Thanks,
schony
 

Read other answers
RELEVANCY SCORE 54

Hello all,

Hope someone can help me out with this. We have a Terminal Server 2008 R2 running inside of Hyper-V. Once a week or so we are getting Bluescreens and the server reboots. I ran the SF Diagnostic Tool and upload to this post Appreciate if someone can help me out here.

Thanks

A:BSOD on Terminal Server

You have to much user mode application craches (information from MSINFO32.nfo). And in 2 dmp files we have:
CRITICAL_OBJECT_TERMINATION (f4) Probably caused by : csrss.exe EXCEPTION_CODE: (NTSTATUS) 0xc0000005
CRITICAL_OBJECT_TERMINATION (f4) Probably caused by : csrss.exe EXCEPTION_CODE: (NTSTATUS) 0xc0000005
It can be system files corrupted (try sfc /scannow ) or problems with security patches.

Read other 3 answers
RELEVANCY SCORE 54

I have my terminal service liscences set up as per device. Can I change it to per user? Can I buy individual terminal server liscences?
 

A:Terminal Server liscence

anyone?
 

Read other 1 answers
RELEVANCY SCORE 54

Hello, this is my first post and I'm kinda lost at this point. I know this is a Windows 7 forum but I need help desperately. I have a new windows server 2008 standard 32bit terminal server setup. The users log in to run several applications and do their printing. The server blue screens constantly while people are working. I am almost cretin the cause is print driver related. Please help me troubleshoot the minidump. The dump contains two separate days I tried to go live with the new box. Thank you for your help!

A:BSOD on new terminal server

Welcome

All the dumps show memory corruption
Run memtest86+ on each stick of ram for 8 passes
RAM - Test with Memtest86+

Read other 3 answers
RELEVANCY SCORE 54

I am trying to install Quickbooks Enterprise so that it runs as a Termnial Server session. Since Intuit is no longer supporting Canadian versions of this software I have no luck getting the proper procedures from them to complete the install. Does anyone know what is required to get the install done? Should be the same as the US version.
 

Read other answers
RELEVANCY SCORE 54

I have a user who is conneccting to our VPN server via
the internet remote connection. He stays connected for
anywhere from 15 minutes to an hour and a half. Then he
is kicked off with a VBscript remote desktop disconnected
internal error has occured error. When he tries to log
back in again he cannot find the server. I need to
reboot so that he can log in again. Had him ping the IP
and it timed out. Anyone know what is going on with
this??

 

Read other answers
RELEVANCY SCORE 54

Can any1 maybe help me to get this right.

I work for a company that has branches all over the show and the outside branches connect to a terminal server to work on an access application. how would i be able to get them to print to their local machine, and to make it worse some of the printers are network and some are just connected to a local machine of the branch.

Ive searched all over the web but to no prevail. and its realy starting to become a bother.

PLEAS help if any1 can.

OH! and have a good 1
 

A:Printing over a terminal server.

you'll need to install all the individual print drivers:

Printers and Faxes --> File --> Server Properties --> Drivers

If you want to avoid installing a hundred print drivers, you can install something like PrimoPDF (can get it from download.com for free) on the client machine and on the terminal server. If they print to PrimoPDF when in terminal services, it will bring it up in a PDF file on their end, and they can then print to whatever printers are attached to their machine.

You will also need to follow the article at the following address to make sure your printers can map to the terminal server:
http://support.microsoft.com/kb/302361
 

Read other 2 answers
RELEVANCY SCORE 54

Hi,

Apologies if this is not the correct forum but I figured it was closest.

When I log onto one of our new Windows 2003 terminal servers I get the error message:

"Your terminal services temporary client license will expire in 6 days. Please contact your system administrator to get a permanent license"

I looked for part of the message on the net and got the following ...

The function of Terminal Server CALs in Windows Server 2003
http://support.microsoft.com/kb/822134

... which told me that the solution was:

1. Click Start, point to Administrative Tools, and then click Terminal Services Configuration.
2. Click Server Settings, and then double-click Licensing Mode.
3. Change the Licensing Mode to Per User, and then click OK.

The problem I have is that if I do that I cannot change the licensing mode as the box is greyed out (no drop down).

This problem will cause the collapse of a major system within a few days so I am asking for help as I do not know what the solution is.

Kyu
 

A:Terminal Server Licensing

The TS needs to be licensed and it doesn't think it is. Are you using this just for the admin connections (2max) or for users to logon? If its for users you need to register that box with your license server for the TS cals.

edit: this may help http://support.microsoft.com/kb/325869
 

Read other 2 answers
RELEVANCY SCORE 54

On a shared printer from a NT Server I keep receiving an Event error 8775 Out of Disk space. I can print from NT server with any user I give permission to print with this printer. But when I install it on terminal server I can only print from administrator account even though the users have permission. This printer is a Deskjet 895C and connected to a Dlink printserver. I have a NT member server managing the que and is shared. I can't understand why it is not working! I just got done connecting a LJ4 with the exact print server and also connecting to terminal server and that is working fine.
 

A:{Resolved} - Terminal Server

I will answer my own question. I read on a website about the incompatability between HP printer drivers and NT Terminal Server. I used a Deskjet 660 driver in the place of the Deskjet 895 driver and worked and is currently printer for users on TS. Just wanted to share that in case anybody else runs into it.
 

Read other 3 answers
RELEVANCY SCORE 54

I have a NT 4.0 terminal server with the citrix server installed as well. The problem I am having is that when youre logged in and idle after a certain time you gett disconnected. Your processes still run on the server. When you log back in you're supposed to be right where you left off, however Word 2000 is coming back screwy where pages out of a document get scrambled. I want to bame this on word and temp files but not sure. Anyone else have any ideas? It only shows up in word so far adn only after a disconnect and reconnect.
 

Read other answers
RELEVANCY SCORE 54

I'm trying to set-up s terminal server and connect via RDP. It's running on Windows Server 2003, port 3389 is listening, but when I find the server on RDP, it says, "the client could not connect to the computer. Remote connections might not be running..." All remote and terminal services are running. Please help.
 

A:HELP. RDP terminal server issues!

The client is on the same LAN?

You made sure port 3389 is open on any firewall running on the server?
 

Read other 2 answers
RELEVANCY SCORE 54

I have a NT 4.0 terminal server with the citrix server installed as well. The problem I am having is that when youre logged in and idle after a certain time you gett disconnected. Your processes still run on the server. When you log back in you're supposed to be right where you left off, however Word 2000 is coming back screwy where pages out of a document get scrambled. I want to bame this on word and temp files but not sure. Anyone else have any ideas? It only shows up in word so far adn only after a disconnect and reconnect.
 

Read other answers