Over 1 million tech questions and answers.

Realtek ethernet driver error code 35, Compaq CQ58, Windows ...

Q: Realtek ethernet driver error code 35, Compaq CQ58, Windows ...

Hello. I have a new Compaq CQ58-353EM laptop. It came with preinstalled system (Windows 8). Afterwards I installed Windows and HP updates. The problem I have is with the Realtek PCIe FE Family Controller (ethernet). In the device manager it is shown with a yellow triangle with an exclamation mark. In the device state it is stated: Your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35). Laptop has all system and hp updates installed. I tried the following to resolve the problem:- 2 different bios versions (F.26 and F.25).- several add/remove/reinstall of the Realtek drivers- 2 different versions of Realtek drivers: 8.3.730.2012 and 8.20.815.2013 (from Realtek site). Ethernet is working OK under Ubuntu. Any suggestions or solutions to the problem?











Solved!
View Solution.

RELEVANCY SCORE 200
Preferred Solution: Realtek ethernet driver error code 35, Compaq CQ58, Windows ...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Realtek ethernet driver error code 35, Compaq CQ58, Windows ...

Test new BIOSCQ58 Notebook PC and HP 655 HP Notebook System BIOS Update (AMD Processors)VERSION:F.27 http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64675.exe

Read other 10 answers
RELEVANCY SCORE 86

This is the code my Compaq cq58 gives me back. 97190297 Please help me.











Solved!
View Solution.

A:compaq cq58 system disabled code 97190297

@siltricos? Enter   28898819 Regards, DP-K

Read other 4 answers
RELEVANCY SCORE 84.8

Disabled code 56993477. Need to access the system and reboot.

A:Compaq CQ58 disabled code 56993477. Need to reset my system.

Hi,Try inserting this code:49691479 Hope it helps,David

Read other 3 answers
RELEVANCY SCORE 82.8

so my friend got a compaq cq58 a day ago but the wireless isnt working, i tried alot of drivers but none worked,been sitting for about 5 hours,none of the drivers work and i dont know why but the cable lan works perfectly.please help

A:Compaq CQ58 WLAN driver problems

Hi there ... Have you tried the Driver from the HP website ..

Read other 4 answers
RELEVANCY SCORE 80

I have recently switch Broadband provider and now have up to 200mb Fibre Optic. The Notebook Adapter only supports up to 100mb. Does anyone now of any Driver upgrades that would get me nearer 200mb. The device currenty uses a Ralink RT5390R 802.11bgn Wi-Fi Adapter. Thanks PS - I am not hugely techie - so fairly layman type answers would be appreciated ! :-)

A:Network Adapters Driver upgrade for Compaq CQ58-278SA Notebo...

Your older gen notebook does not have the antenna connection to support a more modern, i.e. 802.11ac wifi adapter. You can purchase a USB 802.11ac wifi dongle. See the following examples at NewEgg,com.https://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100158094%2050001233%2050001315%2050012... I have the ASUS USB-AC56. It is a beast. 

Read other 1 answers
RELEVANCY SCORE 77.6

Dear All,

Actually I have formatted my HCL M622UCX PC and installed it again. But I found that I could not play any audio in it. I have installed Realtek AC 97 driver but showing erro code 10...I have searched the whole internet and could not resolve it....But in this site I saw one problem similar to mine one.... I hope this forum will surely help me

The Hardware ID and Vendor ID is below;

PCI\VEN_8086&DEV_266E&SUBSYS_2040161F&REV_04
PCI\VEN_8086&DEV_266E&SUBSYS_2040161F
PCI\VEN_8086&DEV_266E&CC_040100
PCI\VEN_8086&DEV_266E&CC_0401

Please please help me out....I will be ever grateful to this forum and site.
 

A:Realtek AC' 97 Driver (code 10) error

PCI\VEN_8086&DEV_266E&SUBSYS_2040161F&REV_04
PCI\VEN_8086&DEV_266E&SUBSYS_2040161F
PCI\VEN_8086&DEV_266E&CC_040100
PCI\VEN_8086&DEV_266E&CC_0401
Click to expand...

According to the vendor and device codes you submitted, your computer has this sound device:

Analog Devices ADI / SoundMAX Digital Audio

----------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 75.2

I bought a laptop from a friend and it has no sound. When I tried to find the source of the problem an error message pops up which I am sure is the root of my problem. It is Realtek AC97 audio driver error code 10. Make: emachines xp, Model number: m622-uk8x. Can someone please assist me with this issue, I would really appreciate it. Thanks in advance.
 

A:Solved: Realtek ac97 audio driver error code 10

Read other 16 answers
RELEVANCY SCORE 74.8

Hi, how can I download the drivers for Compaq CQ58-d64SG Win 7 64-Bit. I only find the drivers for Win 8. Thank you in advance.

Read other answers
RELEVANCY SCORE 74.8

Hi,yesterday I installed windows 10 on my notebook and I have problem, because i can't find the drivers for this operating system.  I found drivers only for windows 8 (8.1), will this version work? 

A:Compaq CQ58 - windows 1 - problem with drivers

Hi: You can try the W8.1 drivers since HP does not support your notebook for W10. Here is the info regarding what models HP supported... http://support.hp.com/us-en/document/c05195282?openCLC=true

Read other 1 answers
RELEVANCY SCORE 74.8

My Ethernet hasn't been working for about a month and a half now and I finally found the time to check my drivers. When I checked, All I am seeing are: - Bluetooth Device (Personal Area Network) #2 - Bluetooth Device (RFCOMM Protocol TDI)  - Intel(R) Centrino(R) Wireless-N 2230 - WAN Miniport (8 different WAN's)But I do no find my Driver for my Ethernet. I've attempted to use the Dell website to download and re-add the driver but it doesn't seem to be doing the trick. Please let me know if I am doing something wrong or if there is an easier way to do it. I'm not sure I can roll back an update for Windows 10 since I never created a roll back point. But I am kind of a layman to this stuff so I may just not know what I am talking about.

Thanks!

Read other answers
RELEVANCY SCORE 74.4

I can't install my audio driver after upgrading to Windows 7 Ultimate x64! I run a Lenovo Y550, my drivers can be found here. When it starts installing, an error pops up and says:Install Realtek HD Audio Driver Failure !![Error Code : -0001] Any help will be real apreciated.

A:Install Realtek HD Audio Driver Failure !! [Error Code : -0001]

try "run as admin"any error code like 0x000005g4?

Read other 9 answers
RELEVANCY SCORE 74

Hi,Someone who can help me find drivers for my notebook Compaq CQ58-d52SI Notebook PC?I need for Windows 7 64-bit..Thank you! 













Solved!

View Solution.

A:Need drivers for Compaq CQ58-d52SI Notebook PC Windows 7 64

On the hp customer care website, audio and network drivers for your model are available. Here is the link:http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5396717#N266 Also, I collated most of the drivers needed for your model and posted here:ftp://win7:R6yq*[email protected]/Notebook/Plato%201.3_HP%202000.zip The size of the file would be around 0.7GB. If you still need any missing drivers, please follow these steps:1. In the Run box type devmgmt.msc.2. Unknown devices would be listed as such and marked out with a yellow question mark.3. Select the unknown device or other device for which you need drivers and right click to access Properties.4. In the Properties window click on Details tab and select Device Instance Id or Hardware ID from the drop down.5. An alphanumeric string like this PCI\VEN_1217&DEV_7130&SUBSYS_012F1025&REV_01\4&6B16D5B&0&33F0 is the identification marker for the device.6. Please provide this number so that we can suggest the appropriate driver.

Read other 4 answers
RELEVANCY SCORE 74

I brought it for my daughter for college

A:I bought a windows 8 compaq CQ58 from a garage sale an its l...

 Immediately after powering on the laptop start tapping the Esc key-about once a second. This should bring up a menu where you can choose F11 for System Recovery. Booting into Recovery  you can do a System Recovery to restore to Factory. Windows 8 Recovery:http://support.hp.com/us-en/document/c03489643 

Read other 1 answers
RELEVANCY SCORE 72.4

I am planning to migrate my desktop pc from Windows XP to Windows 7 (both 32 bit).
The report of Windows 7 Upgrade Advisor suggests:
(!) Realtek RTL8139/810x Family Fast Ethernet NIC:


Before installation of Windows 7 download the actual driver for this NIC from the website of the manufactor (Realtek).

After installation of Windows 7 install the locally stored driver.
The web page  http://www.realtek.cz/realtek-driver.php?realtek=network  says: A driver for this NIC and Windows 7 is  not available for downloading.

What is the best migration path (if there are no driver)? Replacing this NIC in the pc tower by a more modern Fast Ethernet Adapter?
Thanks for your help in advance! 

A:Driver for Realtek RTL8139/810x Family Fast Ethernet NIC on Windows 7 32Bit

Download and save to a USB flash drive or a CD:
Win7 and Server 2008 R2 Auto Installation Program (SID:1656265)

Then install (by clicking on the unzipped setup.exe application file) after you have installed Windows 7.

Carey Frisch

Read other 2 answers
RELEVANCY SCORE 68

Hi i have notebook Compaq cq 58 301-Sl and is runnig so slow also on task mennager is showing high memory ussage .Any solution?
My notebook sys info is

OS Version: Microsoft Windows 8.1 Pro, 64 bit
Processor: AMD E1-1200 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0
Processor Count: 2
RAM: 3688 Mb
Graphics Card: Microsoft Basic Display Adapter
Hard Drives: C: 86 GB (64 GB Free); D: 209 GB (172 GB Free); E: 1 GB (1 GB Free);
Motherboard: Hewlett-Packard, 1885
Antivirus: Windows Defender, Enabled and Updated
Thanks ina advance ( sorry for my bad English )
 

Read other answers
RELEVANCY SCORE 68

I am trying to get into my BIOS and it is asking me for a password I do not have and it gave me the code 98113021 is there a code I can use to bypass this?

A:Compaq CQ58

Hi, Enter   27871007 Regards, DP-K

Read other 1 answers
RELEVANCY SCORE 67.2

Hey guys,

I am new to this forum and am very excited to see such a splendid tech world on net...

To start off, i have recently installed windows vista from windows xp on my MSI - VIA P4M800 + VT8237 motherboard....

What i can see the only problem in with the ethernet drivers....

The above mentioned motherboard supports Realtek 820 CL driver....

None of the drivers viz on-board as well as Lan card in not getting installed...

Whenever i run my driver cd that came with the motherboard, i get the error message saying its compatible only with windows 98/2000/XP...

I am really tensed as i am not able to use my home internet...

Can anyone help me out with the solution plz..????

If possible plz provide me the driver that can be compatible with the above mentioned configuration..!!!! Thanx in advance...!!!!!
 

A:Realtek Ethernet Driver needed..!!!

Read other 16 answers
RELEVANCY SCORE 67.2

what does realtek ethernet control driver do on win7 starter?

A:realtek ethernet control driver?????

I would recommend that you download the latest driver from RealTek for your ethernet controller. The driver Windows 7 installed is probably either an older version or a generic driver.

Read other 6 answers
RELEVANCY SCORE 67.2

My Compaq CQ58 pc is very slow and barely works! I also can't figure out how to do any updates on it. Anyone know how to speed it up and get it working again?

 

A:My Compaq CQ58 is too slow. How do I fix it?

Read other 6 answers
RELEVANCY SCORE 66.4

New Realtek Ethernet Card Driver Released
Release Date: 3-06-2008
Version: 6.107

Device Models:
RTL8100B(L)/RTL8100C(L)/RTL8101L/RTL8139C(L)
RTL8139C(L)+/RTL8139D(L)/RTL8100(L)
RTL8130/RTL8139B(L)


Realtek Software: Drivers & Utilities Download

NOTE: After you extracted the files, you need to run the Setup.exe program and select the Uninstall option the first time. This will remove your old driver. Run the Setup.exe program again, and it will install the new driver. No restart is necessary.

Updated or Fixed:
Fix 8139 does not turn off PHY while wake-on-lan is offShawn

A:New Realtek Ethernet Card Driver Released

I switched to this driver and have had nothing but problems. My system will randomly crash/reboot every 6 to 10 hours it seems. My reason for switching to this version of the driver was the previous version would crash/reboot my machine when I used Media Center (I use my Xbox 360 as an extender to view content on the TV and play music on the audio system).

Now the problem has gotten much much worse. I'm not sure if its a part of the condition, but I also installed the Zune Software (64 bit version) around the same time.

Vista was reporting the RTL Driver as the cause of these problems, and since upgrading windows now reports the RTL Driver and an error with my motherboards ACPI (or is it APCI? I don't remember, I'm at work, can't remember the error message) driver.

I have a spare MoBo (Gigabyte) I'm going to try putting in there, just don't really want to go thru all that hassle of re-installing everything... I really should make some base line images for each MoBo.

Read other 4 answers
RELEVANCY SCORE 66.4

Hi,

I recently upgraded my PC and my ethernet connector is showing a problem in Device Manager - (This device cannot start (Code 10))

I'm using Vista 32, have updated the drivers, but can't get any resolution. It's not an urgent problem as I don't use this connection currently, but I'm looking at installing a wireless connection, and I've been told that I will need to have my cable modem connected to the ethernet port to set up the wireless network (which I don't know is correct or not)

Any suggestions?
 

A:realtek rtl8168/8111 ethernet driver?

Read other 16 answers
RELEVANCY SCORE 66.4

New Realtek Ethernet Card Driver Released
Release Date: 3-06-2008
Version: 6.107

Device Models:
RTL8100B(L)/RTL8100C(L)/RTL8101L/RTL8139C(L)
RTL8139C(L)+/RTL8139D(L)/RTL8100(L)
RTL8130/RTL8139B(L)


Realtek Software: Drivers & Utilities Download

NOTE: After you extracted the files, you need to run the Setup.exe program and select the Uninstall option the first time. This will remove your old driver. Run the Setup.exe program again, and it will install the new driver. No restart is necessary.

Updated or Fixed:
Fix 8139 does not turn off PHY while wake-on-lan is offShawn

A:New Realtek Ethernet Card Driver Released

I switched to this driver and have had nothing but problems. My system will randomly crash/reboot every 6 to 10 hours it seems. My reason for switching to this version of the driver was the previous version would crash/reboot my machine when I used Media Center (I use my Xbox 360 as an extender to view content on the TV and play music on the audio system).

Now the problem has gotten much much worse. I'm not sure if its a part of the condition, but I also installed the Zune Software (64 bit version) around the same time.

Vista was reporting the RTL Driver as the cause of these problems, and since upgrading windows now reports the RTL Driver and an error with my motherboards ACPI (or is it APCI? I don't remember, I'm at work, can't remember the error message) driver.

I have a spare MoBo (Gigabyte) I'm going to try putting in there, just don't really want to go thru all that hassle of re-installing everything... I really should make some base line images for each MoBo.

Read other 4 answers
RELEVANCY SCORE 66.4

New Realtek Ethernet Network card driver released.

Version 6.105

For these device models:
RTL8100B(L)/RTL8100C(L)/RTL8101L/RTL8139C(L)
RTL8139C(L)+/RTL8139D(L)/RTL8100(L)
RTL8130/RTL8139B(L)

Here's the link:

http://www.realtek.com.tw/downloads/downloadsview.aspx?langid=1&pnid=6&pfid=6&level=5&conn=4&downtypeid=3&getdown=false

Shawn

A:New Realtek Ethernet card driver released

Updated from 6.104 to 6.105

Read other 1 answers
RELEVANCY SCORE 66.4

Yesterday I got a gaming pc for Christmas so I decided to set it up. I put windows 7 ultimate 64 bit on and used an Ethernet switch to connect to the Internet as I have an Xbox that needs a cable too. The problem is that nothing shows up when setting up a new connection.i checked device manager an this said that the Ethernet controller needs a driver update so the first thing I done was put in the Msi driver and utilities disc that came with it. It said that it found the driver on there but Realte pcie fe family controller doesn't let me update ethernet controller and I cannot figure out what I could do from here. I also tried the original and another Ethernet cable without using the switch but there is no change. Please help and thank you for your time.

A:Cannot download driver for Ethernet controller because of Realtek...

Did you install all the drivers from the MSI disc? Motherboard Chipset drivers first (the chipset drivers identify the devices on the motherboard and some will not install if the chipset drivers were not installed).

Read other 3 answers
RELEVANCY SCORE 66.4

hi,

optional windows update download for realtek network ethernet (real name too long) = so i downloaded it and installed and reboot then my internet/ethernet connection no longer worked! had to uninstall that device manaager, then use my gigabyte mobo
disc to reinstall their ethernet device, reboot, and that worked.

wonder why that recommended update didn't work?

also in "view updates" that realtek update showed, but in "uninstall updates" it did not show so I could not uninstall it there.

hmm, anyone else use that download?

also just got a bsod while using windows updates. the system log showed error - computer shut down unexpectedly, but gave no reason lol. it was evidently as surprised as me.

Msongs

A:win update realtek driver killed my ethernet?

FWIW - I tend to avoid driver updates from Windows - I use the hardware manufacturer's updates instead.

Read other 9 answers
RELEVANCY SCORE 66.4

the disable number is 82573769

A:lock out of my laptop compaq cq58

@deweydi2 Enter   33451369

Read other 1 answers
RELEVANCY SCORE 66.4

Hi all. My compaq CQ58 wont start up. I cant access the bios..I can here the CPU fan spinning,however the HDD is not!... I have one led light flashing on the CAPS key,approx every 3-4 secs.  I think that this may be a CPU problem..what can I do to fix this myself..?  Can I reset this in anyway? I have tried a hard reset..with no effect..Im thinking that I my have to replace some hardware. Please help any advice is welcomed Manythanks Karl. 

A:Compaq CQ58,wont start up .

Likely the motherboard has died. Processors almost never fail; motherboards fail frequently. The motherboard would be not very expensive and the laptop is relatively easy to work on. Post back with the full model number. CQ58-???

Read other 1 answers
RELEVANCY SCORE 66.4

I tried to turn on my laptop the power light and the wifi light blink and screen very briefly turns on. I've tried taking out the battery and holding power button. I've also tried pressing f10 but it doesn't stay on long enough to get any results. Please help I've had no previous problems with this before

Read other answers
RELEVANCY SCORE 66.4

I have compaq CQ58-202SX Notebook PC.its hard disk is failing. hard disk test giving me following results. Hard Disk smart check: passedHard disk short DST: FAILEDFailure ID: 9LPRUX-6JB84T-MFKT0K-60WU03Product ID: C8D66EA#A2N I created a recovery media 2 years back however i have lost it.The PC sometimes loading windows and suddenly freezing. I already bough a hard disk. Please advice how to get the original operating system and drivers to the new hard disk. I tried googling but no luck.  Appreciate you guys help. Thank you 

A:compaq CQ58-202SX Notebook PC

 You can create a Windows 10 installation on USB or DVD using media creation tool- free download offered by MS. Since it has been activated before as an upgrade you will click Skip when asked for license key.https://www.microsoft.com/en-us/software-download/windows10/ If you prefer reovering the original OS you can call HP Support to see if Recovery Media is still available to order. >>Contact HP

Read other 1 answers
RELEVANCY SCORE 66

I installed some windows updates including an OPTIONAL update to my Realtek Ethernet Controller. After the updates a driver cannot be found for my Ethernet Controller. Even worse, I can no longer connect to the Internet.

I tried an image restore to a previous version of Windows. I tried re-installing a new version of Windows. In all cases the Device Manager shows no driver for:
-Other Devices
--Ethernet Controller

I went to Gigabyte.com and downloaded (motherboard_driver_lan_realtek_8111_vista.exe - 3.89 MB). I can't get Windows to accept the extracted .INF driver file. I also tried running the extracted setup.exe file as Administrator. It says that the driver was installed but still no driver for my Ethernet Controller!
Antec P182 || GA-P35C-DS3R V2.1 || QX9650 3.0Ghz || 2x2GB Mushkin 4-4-4-12 DDR2-800 || ECS 8800GT || WD180GB + WD500GB Sata 3.0GB/s || SeaSonic M12 SS-500HM psu || Vista 64-Bit Home Premium || Lite-On 20x DVD

A:Realtek on-board Ethernet Controller driver not found

Time for the sledge-hammer approach. I am trying a reformat of the partition and then I will re-install Vista-64.

Read other 32 answers
RELEVANCY SCORE 65.6

Please help me folks, I'm on borrowed time today.

I had to reformat my computer thanks to a handful of Trojans and of course, I am missing the Ethernet driver to connect. In the past, I had a friend set me up, but he never told me how to do it and he's gone in basic training so I can't ask for his help today.

I have a custom-built Compaq HP
I will have Windows XP HOME installed when I get the cash.

What I need is help figuring out where to look to find the model number to install the correct driver. I have tried the HP website and it does not work; My driver is built into the motherboard.

I currently have Windows XP Professional for English Students, it's my father's OS
 

A:Unknown Ethernet Driver - Compaq HP (model unknown) Windows XP

"I have a custom-built Compaq HP"...

Custom built by HP or a friend? See if you can tell us the model of the motherboard. Give us any name or numbers you find
 

Read other 9 answers
RELEVANCY SCORE 65.6

I factory reset was done and now it is saying that internet explorer and other apps has been moved and nothing is working right it's like there turned off can I turn them on and how do i

Read other answers
RELEVANCY SCORE 65.6

Hello. I forgot bios password for my laptop . After 3 attempts I get code 50599761 , can you help?
Best Regards Flemming

A:Admin/power on password for Compaq CQ58

Hi, Enter  45491367 Regards, DP-K

Read other 2 answers
RELEVANCY SCORE 65.6

Hi All I have a CQ58 with a failed HDD, I have swapped the HDD and now need to boot from USB to install Windows 10. BIOS is passworded with a a lock code of 59535467. A little help  













Solved!

View Solution.

A:compaq cq58 bios password reset

Hi,       Try the below code to reset 46493469

Read other 2 answers
RELEVANCY SCORE 65.6

I just bought a Compaq CQ58 from a pawn shop. When I power it on it asks for  an administrator password or power on password. It didn't come with that information so I googled it and seen a couple of different multi number password that was suggested to type in. None of those work. When I try three times it comes up with "System Disabled" and gives the numeric code 96623987. How can I bypass this password?

Read other answers
RELEVANCY SCORE 65.6

can someone unlock my bios hidden (advanced) features i need it i'm advanced user i need those tabsand all hidden functions unlockedbut if there's only hidden advanced and power tab and no more hidden settings send me the unlocked bios to flashModel:Hp Compaq CQ58Bios:InsydeH2O Setup Utility Rev 3.7 (after update)Bios Version:F.29tabsMain (shown)Advanced (Hidden)Security (shown)System Configuration (Shown, it have hidden features but the tab is shown)Power (Hidden)Exit (Shown)Please Unlock And send me to flash it!!!!!!!

Read other answers
RELEVANCY SCORE 65.6

I need to no how to facter reset a Compaq CQ58 laptop

Read other answers
RELEVANCY SCORE 65.6

I'm getting ready to sell my Compaq CQ58 and I'm wanting to know how I can remove everything from my computer and have it set back to factory settings so when someone buys it they can set it up for themselves and they don't have all of my pictures and info. My laptop didn't come with a disk but has windows 8 installed. Step by step instructions are appreciated.

A:Restore Compaq CQ58 to factor settings

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue. The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.  Provided your computer came from the factory with Windows 8 installed, please see "Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 8)" to create the HP Recovery Media and see "Performing an HP System Recovery (Windows 8)" for instructions on starting the HP Recovery process.  If you have any further questions, please don't hesitate to ask. Please click the white KUDOS star to show your appreciation

Read other 2 answers
RELEVANCY SCORE 65.6

Hi, For some time now I planned on upgrading my old laptops memory, been looking all over the internet after some info regarding the overclock Mhz and the downclock Mhz,or at least to find out if it's fixed at 1066 Mhz, if any of you have any information about that please don't be shy to share. To not create confusion,the product name is CQ58-250SQ.  Thanks in advance and keep up with the good work,ive seen theres a nice comunity here.

Read other answers
RELEVANCY SCORE 65.6

Hi, I need my bios administrator password for my compaq CQ58 after three attempts I have this code : 97409013Please help me, thanks.

A:Compaq CQ58 needs bios administrator password

Please try this Password :  28561035   Steps to be followed:Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes. Hope this helps, for any further queries reply to the post and feel free to join us again !!  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

Read other 1 answers
RELEVANCY SCORE 65.6

Locked out of my computer Compaq CQ 58 my system disabled code is 60676256 please help me I have a essay due Monday and I'm locked out

A:Admin/power on password for Compaq CQ58

Hi: Restart the PC, and enter this unlock passcode... 75754898

Read other 1 answers
RELEVANCY SCORE 65.6

Please, I would like to know what hard drive name (or producing company) is pre-installed in compaq CQ58.

A:Which hard drive is pre-installed in compaq CQ58? (I don't m...

Hi: I have zipped up and attached a free utility that should tell you the manufacturer of the hard drive, below. Run the utility and close out of the summary window. Then on the left side of the screen, click to expand the Drives category. Then click on the SATA ATAPI drives category, and select the hard drive. Then on the right side of the window, will be all the details regarding the hard drive.    


























hw64_546.zip ?3317 KB

Read other 1 answers
RELEVANCY SCORE 65.6

Need BIOS password pls - error code is 65104384

A:bios password compaq cq58-330sf

Hi, Enter   70862900 Regards, DP-K

Read other 1 answers
RELEVANCY SCORE 65.6

Compaq CQ58 Hiwhen turning on I get Boot device not foundPlease install operating system on your hard disc.Hard disc (3f0)f2...........................visit hp.com.......................  And nothing else  So I do the F2 as follows:UEFI   V 1.6.0.0 - BIOSvisit...................Memory test..............passedHD disc check............passed  I Go to f10>F9 load setup defaults >yes>f10 save and exit>yes  No Improvement although there's life in there cos the disc or fan is spinning I think the next step is redo whole os from usb Can't find links suggested for reboot on HP site- they go absolutely nowhere, useless. This is my son's laptophe loaded windows 10was windows 8don't know what he did but he says it worked on 10 for a while.Why do microsoft allow minors to mess it up so bad? Anyway.... I don't know if it will want to restore as windows8 or 10I don't know if it is 32bit or 64bit anyway Does any of the f10 tell us which.......third line up suggests still windows 8 ????? Here is camera grab of f10  Any IdeasNo tellings off. No shutting of stable doors once the horse has bolted.Just useful suggestions and ways forward please. Much thanks.Regards Dad of Wilf  










Solved!
View Solution.

A:Compaq CQ58 - boot device not found

Hi, It doesn't matter if the upgrade was from 8 - as long as Windows 10 activated successfully, you can use the 'clean installation' method. It's possible that if the machine had just been 'refreshed', the hard shutdown interrupted system files being updated and this can lead to this sort of issue. Generally, a clean installation of Windows 10 has less problems/performance issues than the upgrading from a previous version of Windows. Regards, DP-K

Read other 10 answers
RELEVANCY SCORE 65.2

My network card disappear suddenly. I turn of my computer and turn down the power.
later I turn on my computer and it asked for the driver of a new psi device.
I download the driver from Realtek (one with autorun set_up and the other manual installation)
but the computer does not accept them and the yellow question mark remain on the device manager list for : other devices > PCI Device.

any help ?

thanks
 

Read other answers
RELEVANCY SCORE 65.2

I was in add and remove programs when I accidentally removed my Realtek ethernet controller driver.

Can someone please give me some advice? Thank you

A:[SOLVED] Realtek ethernet controller driver removed by mistake

First try System Restore.

Read other 8 answers