Over 1 million tech questions and answers.

Recent crash issues system exception bsod and Page Fault bsod

Q: Recent crash issues system exception bsod and Page Fault bsod

Just did a malware scan and ended up with bsod. Please check my mini dump and advise on what to try.

Hjalmer

RELEVANCY SCORE 200
Preferred Solution: Recent crash issues system exception bsod and Page Fault bsod

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Recent crash issues system exception bsod and Page Fault bsod

Tried loading Malware Byte and had BSOD:

On Thu 4/3/2014 2:19:27 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\040314-17440-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF800030B7D79, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System

Read other 3 answers
RELEVANCY SCORE 118

Hey all,

Whenever I boot my Windows 7 PC, I usually get to the Windows loading screen and then I get hit with a BSOD. The first one I noticed was a PAGE FAULT IN NONPAGED AREA notice. It restarts, then comes up another, it's either the PAGE FAULT IN NONPAGED AREA one, or a SYSTEM SERVICE EXCEPTION error. It's only these two. A few facts:

1. This doesn't occur in safe mode.
2. I've had this hardware for a month, the error did not occur with Windows XP
3. Once I actually get INTO Windows 7, which happens occasionally, the computer is fine for hours.
4. At the bottom of each blue screen, I see something happen called a memory dump, or something like that (it goes away pretty fast), with a percentage ticker.

Doing a bit of Googling tells me the fault could be made by faulty RAM, but I don't believe this to be the case as it is working fine in Safe Mode.

Any help would be greatly appreciated as these blue screens are ticking me off something shocking!

Cheers.

Edit: Sys Specs below.

A:BSOD on boot, system exception, page fault

  
Quote: Originally Posted by CelestialScribe


Hey all,

Whenever I boot my Windows 7 PC, I usually get to the Windows loading screen and then I get hit with a BSOD. The first one I noticed was a PAGE FAULT IN NONPAGED AREA notice. It restarts, then comes up another, it's either the PAGE FAULT IN NONPAGED AREA one, or a SYSTEM SERVICE EXCEPTION error. It's only these two. A few facts:

1. This doesn't occur in safe mode.
2. I've had this hardware for a month, the error did not occur with Windows XP
3. Once I actually get INTO Windows 7, which happens occasionally, the computer is fine for hours.
4. At the bottom of each blue screen, I see something happen called a memory dump, or something like that (it goes away pretty fast), with a percentage ticker.

Doing a bit of Googling tells me the fault could be made by faulty RAM, but I don't believe this to be the case as it is working fine in Safe Mode.

Any help would be greatly appreciated as these blue screens are ticking me off something shocking!

Cheers.

Edit: Sys Specs below.


Hi, Welcome to SF,

Could you please post the dump file http://www.sevenforums.com/crash-loc...d-problem.html

Hope this helps,
Captain

Read other 5 answers
RELEVANCY SCORE 114.4

Hello all, I've had this BSOD problem intermittently for around two months or more and I think it's time that I sort this out.
I had Windows installed to my HDD before purchasing an SSD and the problem still existed then so I think I can rule out it being a problem with my installation, I believe it is a driver error but what driver I'm not certain of, or even if it is a driver problem at all. It is entirely random and has no pattern to the BSOD, it can happen when exiting a game or when a game is already running, or can happen while on Youtube. It does not happen often though and I cannot replicate it.

Also another issue which may or may not be unrelated is that I cannot use Flash player, if I have it installed the system will freeze randomly and often (within half an hour or so of start up) and requires a hard reset. If audio is playing it will stutter or loop. I can replicate this by using any site with Flash on it, whether it be an advert or a video etc.

Thanks for taking the time to look and I hope you can help, I will answer any questions as best I can.

A:System service exception, page fault in nonpaged area BSOD. Flash too.

Welcome to the forum Jimjam,

Free up the start-up, nothing except the antivirus is usually needed.Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
Remove BitDefender and use MSE in its place.

Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability
compared to other antivirus or internet security software. It is free and lightweight:-Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computer
Good and Free system security combination.
How to Scan Your Computer With Multiple Antivirus Programs - How-To Geek


   Warning
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.



RTCore64.sys Mon Mar 11 11:32:06 2013 (513D6C56)
RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7)
Driver Reference Table - RTCore64.sys

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows you to remove leftover registry:-Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:Clic... Read more

Read other 1 answers
RELEVANCY SCORE 102.8

Hi, I have been rebuilding a PC for quite some time now, tripping up on many errors along the way.

Recently got the computer completely bug free and looked at OC'ing it... have played around with Freq. and Voltages in BIOS for a bit and since I found what I thought to be a stable limit, I got the

"BSOD - Page Fault in Nonpaged Area" like so many here seem to have had.

Computer Spec:

Intel Pentium 4 3.0Ghz (OC'ed to 3.6Ghz)
Corsair Vengeance 8Gb DDR3 RAM (2x4Gb)
Asus DDR3 Mobo
XFX Radeon HD 5450 1024Mb
Windows 7 Ultimate


Only non-stock software installed is CPU-Z and ATI Catalyst Control Centre


I have uploaded my 3 most recent minidump files as attachments, any help would be greatly appreciated

A:BSOD - Page Fault in Nonpaged Area? Recent

i have had this issue before also with overclocking. check ram. some brands cant handle what it says it can. remove all ram but one that is name brand and see if it takes the stress. this fixed it for me. all the ram was rated the same but some off brand korean stick was causing the issues

Read other 4 answers
RELEVANCY SCORE 100.8

Hello everyone,

I've been having BSOD for the past year. I've tried the normal ways to fix it: update drivers, chkdsk /r /f. Still having problems. As of late it has been happening more and more frequently. I don't game, it usually just happens when I'm browsing the internet or using excel. Any help would be greatly appreciated. (I had two BSOD while trying to post on this forum, not in the attached log)

Regards,

Vince.

A:Constant BSOD most recent 0x0000050 page fault nonpaged data

Just had another, 0x000000d1 wdf01000.sys, DRIVER IRQ NOT LESS Equal.

Even when starting my computer I got a BSOD. It's beginning to be ridiculous.

Read other 3 answers
RELEVANCY SCORE 96.4

Hello, Yesterday I updated the driver for my AMD Radeon HD6310 equipped Gateway laptop . After it was installed WM player and VLC player stopped working so I rolled back the driver but it did not fix the issue. I noticed that after the "driver" installation, some programs were added and some windows processes were altered.

I went to System Restore and picked a restore point before the driver update. However after initializing, the system crashed and I got a BSOD. I tried several other restore points but they all crashed and led to the BSOD.

Any help would be appreciated.

System: Windows 7 Home Premium 64bit, AMD Dual-Core Processor E-350, AMD Radeon HD 6310

Here is the system log:

A:BSOD during System Restore, Recent driver update at fault?

I should mention that I rolled back the driver but it did not fix the issue. I noticed that after the "driver" installation, some programs were added and some windows processes were altered.

Here is also some info I copied from the error report:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA80037A2390
BCP3: FFFFFA80037A2670
BCP4: FFFFF800027D1E40
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\081116-29187-01.dmp
C:\Users\David\AppData\Local\Temp\WER-53555-0.sysdata.xml

Read other 7 answers
RELEVANCY SCORE 96

Typically I use WhoCrashed to diagnose my BSOD issues. However, this recent round of crashing has been elusive due to the lack of crash log. There isn?t a dump file in system root folder or in the mini dump folder. Reading online I?ve made a few adjustments to see if somehow my crash dump was disabled. I made sure my pagefile was larger than my installed RAM, I made sure my pagefile is on the same drive as OS and I have more than 15% of free space. Doing a crash dump test with WhoCrashed does produce a crash dump but the BSOD still doesn?t. There are no other errors in the event log before the crash report. I don?t know what else there is to say. I?m attaching a SF Diagnostic zip.

A:BSOD no crash log: page fault in nonpaged area

Please post this report before we begin: Windows Genuine and Activation Issue Posting Instructions

Read other 3 answers
RELEVANCY SCORE 94.8

Hi there. I've had a number of BSOD in the last week or so. It tends to happen when I've just clicked a link, but it looks like it's happening in the middle of the night as well. Help?

Please let me know if there's more information I can provide. Thank you very much in advance!

Read other answers
RELEVANCY SCORE 92.4

hello all. i just recently completed the build on a customer build. at random times i will get a bsod crash and restart. the error says system exception error at the top of the BSOD and computer goes memory dump and system restart. it is an intermittment issue and definitely a little computer savvy.

System specs

AMD Athlon II X4 635 Propus 2.9GHz Socket AM3 95W Quad-Core ASUS M4A79XTD EVO AM3 AMD 790X ATX Seagate Barracuda 7200.12 ST31000528AS 1TB 7200 RPM SATA 3.0Gb/s 3.5 G.SKIL 1 GB 240-Pin DDR3 SDRAM DDR3 1333 x 4 Rosewill BRONZE series RBR1000-M 1000W EVGA 01G-P3-1158-TR GeForce GTS 250 1GB 256-bit DDR3 PCI

Exp Much help appreciated
matt

A:BSOD crash System exception error

Hi,
Your dump have error code :
0x3b = indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
0x7E = usually cause by drivers.

Start with removing avast and replace it with MSE , because I see avast driver involved in the crash.

Code:
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff88002abf2a3, fffff88006772a98, fffff88006772300}
Probably caused by : aswMonFlt.sys ( aswMonFlt+52a3 )
Perform system file checker because your windows services crashed or stopped in an unsupported way.
--> command prompt(as admin) -> sfc /scannow

Update these drivers :

Code:
AsIO.sys Mon Dec 17 01:11:49 2007 --> Asus PCProbe Utility
Rt64win7.sys Fri May 22 07:52:30 2009 --> realtek NIC
Log

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff80002ac56e0, fffff8800a3ecec0, 0}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceHandler+7c )

Followup: MachineOwner
---------

1: kd> !analyze -v
***************... Read more

Read other 4 answers
RELEVANCY SCORE 88.8

BSOD Page Fault, IRQ Less than or Equal Too, System Freeze.. minidumps.. help cpc2004

Hey,

I've been getting BSOD's lately, either the PAGE_FAULT.. or the IRQ_LESS_THAN.. and I even got a system freeze once. The system is an AMD purchased less than 2 weeks ago, running legitimate software (Windows XP Pro). I've installed a scanner yesterday but it was giving me a blue screen even before that. I've installed and uninstalled several programs already, such as ClamAV, UltraEdit, but still getting the same error. I've read the other threads and included 5 mini dumps and I'm desperately hoping someone can maybe help me diagnose it to see if I could fix it myself.

The CPU doesn't seem to overheat, and it's an AMD Athlon 64 3500+ CPU on an Asus A8V motherboard with a Seagate 200 gig SATA HD, Sony 28A DVD writer, Sapphire 9250 128M AGP 8x video card, and 2 sticks of Kingston 512 PC3200 RAM. The shop I bought it from is telling me to bring it in to their shop in a few days because they're too busy but it's for work and now I regret not purchasing from a bigger store who might have just exchanged it with me for a new one because I'm assuming it's a hardware problem (RAM)

Any help is greatly, greatly appreciated.

Thanks to all who contribute their time and expertise,

Herman

Here's the 1001 messages

Event Type: Information
Event Source: Save Dump
Event Category: None
Event ID: 1001
Date: 1/3/2006 ... Read more

A:BSOD Page Fault, IRQ Less than or Equal Too, System Freeze... with minidumps

Plse list all system devices.
 

Read other 4 answers
RELEVANCY SCORE 88

Hello, I have an Acer Desktop, And upon booting the machine first time in the morning, I get the BSOD 0x50 Page Fault In Non Page Area. Then it goes to the start up repair, then after reboot, it goes into windows fine.

I have ran the windows 7 memory diagnostic tool and it reports no errors

Attached are the dump files.

Help would be much appreciated
Many Thanks

A:BSOD 0x50 Page Fault In Non Paged Area When Booting System

http://www.sevenforums.com/crashes-d...tructions.html

Read other 2 answers
RELEVANCY SCORE 86.8

I have bought a new hardware recently ( Asus M4A78LT-M LE, AMD II X3 440 and Geil 2GB DDR3 1333 Value 9-9-9 ) I assembled everything togheter with hardware left from my old PC, which gave me this:

CPU: AMD II X3 440
Mainboard: Asus M4A78LT-M LE
Memory: Geil 2GB DDR3 1333 Value 9-9-9
Hard Drive: 160 GB Westgate
Video: Geforce 9600 GT
Power Supply: Chieftec smart 450W

I formatted whole HDD and installed fresh copy of Windows XP service pack 2. After few hours my windows started crashing ( BSOD, PAGE_ FAULT_IN_NONPAGED_AREA, STOP: 0x00000050, nv4.disp.dll, dumps of the BSOD in the attachment ) when I tried to play Crysis or Race Driver Grid. I checked other games and windows crash in all of them ( Modern Warfare 2, Need For Speed Shift, Left 4 Dead 2 ) with same BSOD. I tried reinstalling GPU drivers but that didn't helped, I also tried installing old ones, no success.
I have noticed that almost all of my applications suddenly crash ( Mozilla, Chrome, Office ) after few minutes of use. Furthermore, the files I download from the internet or copied from the usb sticks to HDD gets corrupted by CRC errors very often I reinstalled system two times but that didn't solved crashing and BSODS. After that I had all my hardware component tested and I also have found nothing:

CPU: Tested with orthos ( I ran two instances to test first two cores and the third one )
One hour test with no errors. ( 35 - 38 C when IDLE, 45 - 48 C when in stress )

RAM: I tested my stick with ... Read more

A:BSOD and system unstabilitity after hardware change. Page Fault In Nonpaged Area

0x50AGE_FAULT_IN_NONPAGED_AREA
Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).

nv4.disp.dll is a Nvidia display driver. Try the following:

1. Download Driver Cleaner Pro or Driver Sweeper (both have free versions; make sure the version will work with your OS) to your desktop screen and install.

2. Download the latest diver(s) for your video card but don't install them.

3. Uninstall your video card drivers and reboot your PC into Safe Mode. Run Driver Cleaner Pro or Driver Sweeper but ONLY for the video card drivers. I had someone use it on their chipset drivers! If it doesn't find any video card drivers that is quite okay.

4. Reboot and install new video card drivers.
 

Read other 7 answers
RELEVANCY SCORE 86.4

Hello,

I'm running window7. I installed my SSD 2weeks ago no problems until today.

BSOD "page fault on non page area"

It crashes after about one minute into startup

Really confused...

Obviously kind of a noob, but could really use some help.

A:BSOD crash 1min after boot "page fault in non paged area"

Hi,

Bugcheck 0x50 points to a memory problem.

Run MemTest86+ for a minimum of 7 passes (usually this takes several hours, so run it overnight) to check for errors.
RAM - Test with Memtest86+

Also, please follow the steps here:
http://www.sevenforums.com/crashes-d...tructions.html

Regards,
Golden

Read other 1 answers
RELEVANCY SCORE 85.6

Hi everyone, I always lurk around these forums for many a computer issue throughout the years, but after several BSODs rampaging through my system for the last few days, I decided it was time to make an account and get some direct help.

The BSODs are not a normal occurance. It started this week, happening just before I'm browsing the web (Firefox) normally. A "Content Encoding Error" page shows up after some random interval, and it seems that the BSODs happen right after I reload the page a couple times.

The messages that usually show up are Driver irql not less or equal or System service exception.

Naturally, I tried some basic remedies, like booting up the Safe Mode and scanning for malware with malwarebytes or adwcleaner, but no dice. I thought it would be a driver issue, and updated all of them through Driver Booster (Iobit).

I've cleaned with CCleaner, so the dump files aren't all that impressive, but I can't understand a lick of it.

I've attached the minidump file below. Let me know if there's anything I can clarify.

Thanks, you guys are the awesome!

Read other answers
RELEVANCY SCORE 80.8

I shutted down my computer this morning properly. When I turned it on in the evening I was forced to check filesystem. Filesystem errors were fixed, but after booting on in about a minute I got a BSOD: "page fault in nonpaged area".

I've booted into safe mode and all works fine. I've tested SMART on my disks all fine. RAM also ok. Tried to remove some software, drivers, nothing works :/

My system is:

Windows 7 Ultimate 64-bit BOX Full Retail SP1
Age of system: about 3-4 months.

2x Quad Core Intel Xeon E5472, 32 GB DDR2 FB-DIMM ECC, ATI Radeon HD5770 1 GB DDR5, 4x A-DATA 30 GB SSD in RAID 0 on Areca ARC-1231ML controller + BBU (for Windows 7), A-DATA 40 GB SSD (for Mac OS X), 980W Delta power supply, LG DVD-RW 22x

A:BSOD "page fault in nonpaged area" just after system startup

No one knows ?

Read other 3 answers
RELEVANCY SCORE 80.4

For a long time now i have been getting BSOD's, pretty much all of the time from System Service Exception and KMode Exception Not Handled. Sometimes the PC never gets to the BSOD and just freezes up and restarts. This happens at any time whether im doing nothing or on the internet, sometimes it happens before the PC can load up fully. Most of the time though it happens when i am gaming. I rebuilt most of my PC but this still carried on. The parts that i have replaces are the PSU, RAM, Graphics Card and the case as well as adding in 2 extra fans. The temperature stays withing good values. The PC also often gets stuck on the post boot screen where it says "SMART Check Capable and OK" and it will take a few minutes for it to get past this stage and carry on loading, but this doesnt happen not all the time. I have tried diagnosing this myself but i have hit a wall. I ran Seatools and the HDD failed all of the tests, however after checking the fail code this was simply because it couldnt find the serial number. The HDD then passed tests from both CrystalDiskInfo and DiskCheckup. I thought that it was either the HDD or the MB as they are the only components not to be replaced. Since HDD seems to have passed its SMART tests i am inclined to believe it is the MB. PLEASE HELP!!!

example of BSOD's in attachment

A:BSOD from System Service Exception and KMode Exception Not Handled

Hello Perry, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 2 answers
RELEVANCY SCORE 80

Okay so when I play World of Warcraft for 5minutes-6hours the game randomly shuts down.
I found out my problem was that my Video Card isnt up to date so I updated.
I updated and im still getting the same issue.



I looked at my EPU-4 Engine and when i click on VGA it says VGA not detected.
Can someone please tell me what the possible problem can be and how I can fix this?


My graphics card is a ATI Radeon HD 4600 1024mb.

I cant attach mini-dumps because for some odd reason it I apparently dont have permission so if anyone know how to bypass through this please let me know.

System specs
Motherboard)ASUS M4A785-M
(Processor)AMD Phenom II X4 955 3.22GHz
(RAM)2GBDDR3
(VGA) ATI RADEON HD 4600 1024mb

Oh and by the way it sometimes goes blackscreen with these lines coming down while the game plays in the background and I have to manually turn off my computer.
Sometimes it gives me BSODs with PAGE FAULT NON PAGE AREA or IRQL NOT LESS OR EQUAL.

A:[SOLVED] BSOD Driver IQRL not less or Equal Page Fault Non Page Area

Smells like video card puttering out.

Are you referring to a permission denial by attempting to attach the dumps directly? You'll need to zip them first before sending them over, as only certain file types are permitted. Plus there's a 5 MB limit (doubt that's the cause though).

Read other 7 answers
RELEVANCY SCORE 80

Guys..

I been facing some issues with my relatively new CPU.
I have an Intel i5 2400 cpu, combined with 4GB DDR3 memory.
Mobo is DH67BL - revision 3. No GPU installed.
Power supply is via Corsair VX450.

Problem i been facing:

1) BSOD saying that A clock interrupt wasnt recd.

Screenshot:-
http://i42.tinypic.com/262lbhc.jpg


2) BSOD saying: Page fault in non paging area.
Couldnt grab a screenshot for this.

3) Display randomly goes off for a split second and reappears.. but the color of the panes go blue (i havent chosen blue. My setting is for clear pane.)

Screenshot:-
http://i40.tinypic.com/o94vfs.png

This error solves itself after random number of hours/mins

4) Display vanishes for a split second and reappears, and a small balloon at the bottom right corner prompts that the display driver had stopped working.

5) System plain hangs/stops responding. Randomly happens.. but more so while on youtube, or after hrs of it idling, i come back to the comp and try to scroll the content onscreen.
Sometime it revives from the stuck state as if nothing happened, sometimes i have to give it a cold boot.
6) While reading forums with blue bands.. the blue bands kinda form blurry bars which stretch till the end of the screen. I tried to grab a screenshot but the screenshots were clean. The bands moved as i dragged the image about.

7) Also, my comp's display went off one day and within a second came back with a blue-ish hue. It restored itself but again has ... Read more

A:Facing BSOD(Page fault Non page area/Clock interrupt not recd) + hangs

33 of 44 crashes were related (as you surmised ) to a Bugcheck of 101. The rest were various hardware complaints. Please read below for what to try.

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg
You should also update to SP-1 when you resolve this issue.

Read other 7 answers
RELEVANCY SCORE 79.6

this is my 1st post so i hope im doing everything right. ive had this problem from the beginning, when i built this computer. it just happens more so when im playing online games. i get 3 different errors the most common one is the page fault non page error the other two are dxgmms1.sys and memory management something. i thought it might be bad ram so a ran memtest86+ and everything came back good. i also thought it might be a bad install so i ran a repair and it found NET framework 4.0 was bad, so i downloaded it again. i thought it was fixed but its still doing it, crashes. please help

A:BSOD mostly when playing mmos page fault non page error

Welcome,

You have 32 GB of RAM. Are all the ram speed/clocks at the same level?

How many passes did you take memtest for? Did you try inserting each stick in different slots and see how your computer performs?

Read other 9 answers
RELEVANCY SCORE 79.6

Here are my system specs:
AMD 2200+
WinXP Pro SP2
760MB Ram
nVIDIA GForce 4 video

My computer will randomly shut down with either the page fault in non page area or driver not less of equal errors.

I have uninstalled and reinstalled drivers for the video and usb.

I don't know what else to do.

Will

A:BSOD Page Fault in Non Page Area/ Driver not less or equal

Hi flannelman,

Please give us the exact error message.

Thanks,

Rigel

Read other 4 answers
RELEVANCY SCORE 79.6

Hi Guys,

I'm a composer working on a deadline and have started to experience quite intermittent BSOD's.
It appears to happen at higher system loads.
I'm reasonably experienced in building custom machines (this is my third on), and so far have never experienced issues with them.
This current one is a racked i7 3930K Hexacore on a Sabertooth x79, with 32gb of Ramm and a GTX470.
I'm using Nuendo 6 in 64 bit mode (Cubase's bigger brother) with an RME Fireface 800.
The fireface runs via firewire and has its own pcie card for this.
In addition there is an external G-tech drive connected via Esata.

In the last week I've been having 1-3 bsod's a day..a real productivity killer and I hope someone can help me out. I've used Whocrashed to at least get an indication of what it might be, but I don't have much experience with minidumps.

The only thing that I have noticed is that Windows is attempting a surface scan during startup, which fails due to a 'recently installed software package' I have no idea what that might be.
I've not been able to do a diskchk on C:
Regardless, C: seems to work fine and I've not noticed any issues.

Drivers are pretty much up to date.

I'm attaching a dump, would someone mind having a look and giving me a clue? Thanks in advance!

Joe

link to dump:
https://www.dropbox.com/s/avmzs9jxsf...3-35006-01.dmp

A:BSOD - Kmode exception and System Service exception

We need a few more files. Please follow the instructions in this thread:
Blue Screen of Death (BSOD) Posting Instructions

Then attach your files here directly using the paperclip icon.
Attachment 280245

Read other 5 answers
RELEVANCY SCORE 78.8

I keep getting BSOD at random times. Sometimes it crashes while I am not even doing anything. I have tried to reinstall windows couple times with different versions of Windows 7 x64. I have attached the mini dump files. Please help. Thank you
 

A:I keep getting Page fault in non page area BSOD on Windows 7

Hello,

I suspect bad RAM. Try testing it, using this guide:sevenforums.com/tutorials/105647-ram-test-memtest86.html

Sorry about the non-parsed link, I had to edit it to avoid detection by the forum software, which apparently prohibits new members like myself from posting links.

Firefox.exe was running in 2 dumps, which makes me suspect a network issue. Remove Norton, as per these directions: jcgriff2.com/NRT_N360_Removal.html

Replace it with MSE: microsoft.com/security_essentials

Summary of the Dumps:
Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Thu Oct 28 21:38:56.276 2010 (UTC - 4:00)
System Uptime: 0 days 1:45:02.587
BugCheck 50, {fffffa81856a0358, 0, fffff80002a8fb9b, 5}
Probably caused by : memory_corruption ( nt!MiDeleteAddressesInWorkingSet+27f )
BUGCHECK_STR: 0x50
PROCESS_NAME: firefox.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Mon Oct 25 22:59:36.070 2010 (UTC - 4:00)
System Uptime: 0 days 0:01:01.382
BugCheck 1A, {5002, fffff70001080000, 2704, 2785fffffffe}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+2971c )
BUGCHECK_STR: 0x1a_5002
PROCESS_NAME: sidebar.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии... Read more

Read other 20 answers
RELEVANCY SCORE 78.8

So just today, i turn on my computer, but i receive a BSOD, that says "Page fault in a Non page Area",
After some researching i clean my computer, and still receive the error.

I can safely boot into safe mode, and after booting into safe mode i can then boot into windows 7 (Windows 7 Ultimate 64 Bit) normally after restarting. But the computer just goes not responding, and i can't do anything.

I've run memtest but there's no problems.
I also have a minidump file.

Is there any solution to this?
 

A:Solved: BSOD Page Fault in Non Page Area

The minidump is showing klif.sys, Klif Mini-Filter fre_wnet_x86 from Kaspersky Lab, as the probable cause for your BSOD. Basically, it's a driver part of your Kaspersky software.

You may have installed a 32-bit version of Kaspersky on a 64-bit version of Windows 7.

Uninstall Kaspersky completely and try your computer again.
 

Read other 3 answers
RELEVANCY SCORE 78.8

I got this error when I installed Advance System Care and when i scanned my USB with noob killer. Then the P.C restarted and it started to displays the page fault in non page area.

The problem is when i boot in window xp cd it display this BOD error and when i boot Safe mode and Start windows normally it only reboot the P.C. So there is no way i can access the control tab window xp

My current p.C until i bought a new one :
Intel Pentium III ~ 1000Mhz ~ 192mb RAM ~ 15 GB disk and 40 slave HD

I need your expert advice thanks!!!
 

A:Solved: BSOD:Page fault in a non page area

Read other 7 answers
RELEVANCY SCORE 77.6

Hi,

I have an intermittant crash that never actually BSOD's when it crashes, but sometimes (around 50% of the time) leaves minidumps. I can force a crash using a graphics-intensive program, however the computer will sometimes crash even when it is idling on the desktop. At other times It will idle for many hours without crashing.

This is a P150HM Laptop Built by Clevo, rebranded by Metabox (running a Sager BIOS).
? OS - Windows 7 SP1, x64
This computer has only ever run on Windows 7 for the last approx 2 years (when I bought it). I reinstalled it 3 days ago due to these crashes.
? CPU - Intel Core i7 i think it is a 2720QM processor
? GPU - NVIDIA GTX485M 2GB
? Power Supply - OEM "FSP Group INC" 19V DC 9.47A

I have recently been receiving a lot of errors indicating the "Nvidia driver stopped responding and recovered" errors, and then when it started crashing often I reinstalled windows 7. I have now applied all the windows updates and installed the latest non-beta Graphics drivers however the laptop still crashes.

Faultfinding:
1) Fans are confirmed working and spin up when GPU temps rise. Using Furmark 3D, i have witnessed a crash at both 77 degrees, however minutes before that it didn't crash until it reached 99 degrees (which is near its peak temperature at full load)
2) The computer doesn't seem to crash (at all) when it is running on battery power. Including when running Furmark 3D tests.
3) The computer does crash almost always... Read more

A:Crash without BSOD - Suspected PSU or GPU Fault

I'm becoming more inclined towards a power supply fault. I have set power settings to remain in "power saver mode" even when the power supply is plugged in. The computer is perfectly stable while it is running on battery, however it is now crashing within a minute or so of plugging the adapter in.

So I can charge my laptop while it is off, and then i can use it when it is unplugged... and it works fine...

I've included a system log file into this post, noting that it often displays all 8 processors coming up with the error

The speed of processor # in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.

(all 8 processors come up with the warning at the same time)

I'm inclined to order a new power supply, i can get a new genuine one flown in on Monday for around $150.

Read other 3 answers
RELEVANCY SCORE 77.6

- x64 Win 7 home premium
- the original installed OS on the system? yes
- OEM version
- What is the age of system (hardware)?- 2 months old
- What is the age of OS installation (have you re-installed the OS?) 2 months old and no.


- HP P6674Y Pavilion Quad Core Phenom II 2.8Ghz, 8GB DDR3, 1TB SATA3, Windows 7 Home I did instal a video card: PowerColor AX3450 512MD2-H Radeon HD 3450 512MB 64-bit DDR2 PCI Express 2.0 x16 HDCP Ready Video Card and bigger PS: Antec EarthWatts Green EA-380D Green 380W and 2GB additional: SAMSUNG 2GB 240-Pin DDR3 SDRAM DDR3 1333 Desktop Memory ram when I first got it. The bsod has just started the last 2 days.

A:Page fault in non page area bsod

Hello there. I think that here you need to run a Check Disk tool.
Disk Check

Forget.
Ken answered you.

Read other 5 answers
RELEVANCY SCORE 77.6

Hello,

I am getting sick of BSOD's.
I recently changed by video card because i was experiencing the stripe problem with my XFX hd 5870.Now i used rma to get a new videocard and i got a Sapphire Vapor-X HD 5870 (I got it 08 juli 2010 so ignore the events before that, because that was probebly my old videocard) .
Only now i am experiencing random BSOD's. I got one just now when i was only running a virus scan (kaspersky was the only program running).
I also got one during gaming (Alien Swarm, but it doesnt even matter cause it does it with all games).
And i got one BSOD during downloading newsgroups with grabit.
I currently am remote desktoping to my home pc to make the zip file needed for this post, so the test might say that the network is a bit overloaded since i am running the test remotely.
I just saw the test is done and it said some nic's are disabled and that tungle (a vpn) is disabled. Just ignore those since i disabled them because i dont use them.

I also checked my primairy harddisk (intel ssd 80 gig) with hdtune pro and it did not find any errors.
Further more i uses memtest for my memory a while ago and it also didnt report any issues.
All drivers are up to date and so is windows 7.

So ignore network related issue's since this is not the problem.
And ignore problems before 08 juli 2010 since i got a new videocard.
And perfmon said i didnt have antivirus, but i do since i use kaspersky.

Please check out the zip file to locate my problem. I personally think ... Read more

A:BSOD: Page fault in non page area

What memtest did you run? Be sure to use Memtest86:






  
Quote: Originally Posted by JK


Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.


I know 3rd party anti-virus programs are famous for causing BSODs in Windows 7 and Vista, and Kaspersky is certainly one of them. Please remove it with this tool: http://support.kaspersky.com/downloa...vremover10.zip

Replace it with the free Microsoft Security Essentials: http://www.microsoft.com/security_essentials

If that does not work, please enable driver verifier: Using Driver Verifier to identify issues with Drivers

...Summary of the Dumps:
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Tue Jul 20 13:56:10.507 2010 (UTC - 4:00)
System Uptime: 0 days 1:49:51.600
BugCheck 50, {fffffa80029bc00b, 0, fffff800030a043b, 2}
Probably caused by : memory_corruption ( nt!MiAgeWorkingSet+41b )
BUGCHECK_STR: 0x50
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Mon Jul 19 15:17:30.014 2010 (UTC - 4:00)
System Uptime: 0 days 2:21:55.106
BugCheck 50, {fffff8a01548d0d8, 1, fffff880010f7920, 2}
Probably caused by : fileinfo.sys ( fileinfo!FIStreamLogForNL+7b )
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.e... Read more

Read other 1 answers
RELEVANCY SCORE 77.6

Hi there, I've recently been getting some weird crashes when I play Age of Empires 3. I'm not sure about other games, as this is the only one I've played in quite awhile. Randomly, I will get a BSOD, sometimes not at all though. The last one I got said PAGE_FAULT_IN_NON_PAGED_AREA. I've attached 6 (2 zips) minidumps in hopes that somebody can help me out

EDIT: I've read the pinned thread on what to do before attaching minidumps and completed (as best i could) all of the steps, but still get a BSOD. I have 1GB of memory, but it's in 4 sticks of 256MB so I couldn't really switch to a new slot. I did, however, clean the contacts.
 

A:Page Fault In Non Page Area Bsod

Hello and welcome to Techspot.

Your minidumps are quite old, being from december of last year.

Please post 5 or 6 of your latest minidumps.

Also, please go HERE and follow the instructions.

Regards Howard :wave: :wave:
 

Read other 3 answers
RELEVANCY SCORE 77.6

I have an ASUS Win 7 laptop. It keeps giving me a BSOD at any time. I have uploaded a zip file with hopefully helpful info.

A:Win 7 BSOD page fault in non page area

Welcome .

One bugcheck is not enough to establish a pattern, if you have some more please upload those as well.

We can see that by looking at the stack that something called win32k in order refresh a window
(redraw) but it hung for some reason and that Kaspersky (klif.sys) could have been involved
in some way or another not much info here.


Code:
Unable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
0xfffff880050aafb0 : 0xfffff960000e0000 : "win32k!DereferenceW32Process <PERF> (win32k+0x0)"
0xfffff880050ab028 : 0xfffff960000ffc0d : win32k!RGNOBJ::bCopy+0x5d
0xfffff880050ab068 : 0xfffff960003c8500 : win32k!gpvwplHungRedraw
0xfffff880050ab088 : 0xfffff800030c5cee : nt!KiPageFault+0x16e
0xfffff880050ab090 : 0x0000000000000008 : Trap @ fffff880050ab090
0xfffff880050ab0f8 : 0xfffff960001ad1fb : win32k!xxxSendMessageToClient+0x1f7
0xfffff880050ab168 : 0xfffff960001acaa7 : win32k!xxxSendMessageTimeout+0x2b6
0xfffff880050ab1a8 : 0xfffff960001687b5 : win32k!DEVLOCKOBJ::bLock+0x411
0xfffff880050ab1b8 : 0xfffff960001a7f5b : win32k!XDCOBJ::RestoreAttributes+0x3b
0xfffff880050ab248 : 0xfffff960001ae249 : win32k!ClearHungFlag+0x41
0xfffff880050ab278 : 0xfffff960001261f1 : win32k!xxxBeginPaint+0x2ad
0xfffff880050ab2d8 : 0xfffff960001bf2ec : win32k!NtUserBeginPaint+0x8c
0xfffff880050ab378 : 0xfffff960001c27bd : win32... Read more

Read other 1 answers
RELEVANCY SCORE 77.6

This might be a little longish and for that, I apologize. This morning, I turned on my Windows 7 Ultimate Dell XPS 720 and it ran for a few minutes and threw the BSOD error code described in the title. Let the system reboot, it ran for a few minutes and did the same thing. OK. Now we have a pattern. I'm not sure what it means but there is a pattern. I tried to restore to a previous date (June 24th and today is the 28th) and everything seemed to be going ok until it was complete. Now the system is restarted but I'm getting no video except for the cursor. I have video during POST but nothing except the cursor after Windows starts. Same thing happens during start up or start up in safe mode. Obviously, I can't see anything on the screen so I can't troubleshoot very extensively but if anyone has any suggestions, I would greatly appreciate your help.

A:BSOD Page fault in non-page area

Since Vista and 7 are very similar, and I just had the "black screen with cursor only" issue myself, this may help you, but I think it may be graphics driver related. I went to update my Nvidia graphics drivers, and it must not have worked properly, because all i got upon boot was a black screen with a cursor. i would get the windows boot logo and animation, and then it would go to a black screen.
I did not get the BSOD, because I have the pagefile turned off(I have 8GB of system RAM).

For my solution, you will need 2 things: current Nvidia drivers, and a program called driver sweeper.

First, boot in safe mode, and go into your control panel, and "uninstall" the nvidia graphics drivers. it sounds stupid, but this is the only effective way to uninstall the graphics drivers because of the software nvidia bundles with them. Next, run driver sweeper, and get rid of all remnants of the graphics card drivers. Then, reboot. First, go into a regular boot to see if you get video on the generic drivers from windows. If you do, your cards are good, reboot again, and go into safemode once again. If you dont get video upon normal reboot with generic drivers, see the * after this. Once back in safe mode, run the nvidia installer package, as administrator. It will install, and will prompt you to reboot. Reboot into a normal boot cycle and you should be fine, and have video again.

* if you boot into a normal boot, and you have followed the steps to remov... Read more

Read other 7 answers
RELEVANCY SCORE 77.6

Please help, my computer keeps restarting with the BSOD. The error it give is page_fault_in_nonpage_area. I have basic computer skills, so if you could please walk me through a fix on this I would really really appreciate it. I am running windows xp on a dell.

Thank you so much in advance!

A:BSOD Page fault in non page area

Boot off of the Windows Disc Or download the Recovery Console ISO. Burn it to CD with IMGBurn Boot off of the CD and get to the Recovery Console. Here type chkdsk /R and press enter. The Check Disk utility will try and fix any file errors.
You can also download the ISO image for Seatools, or WD DataLifeGuardin my signature and burn the image to a CD using IMGBurn also in my signature and boot off of the newly created CD and run the Quick and Advanced tests on the HDD to test the integrity of the drive.

Read other 5 answers
RELEVANCY SCORE 77.6

hi,
i just installed win 7 and installed all my drivers successfully,after an hour i got a bsod stating -page fault in non page area.Its been two days since am gettin this. i can log in and use my pc for some minutes before the bsod shows up..o and my pc is only 2 months old.please help.

A:BSOD-page fault in non page area

Hello Trx8 and welcome to Sevenforums.

BSOD Analyse

I'm suspecting 3rd party drivers, let's enable Driver Verifier.






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "IRP Logging", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next" ("Special Pool" may be able to be used depending on amount of RAM and errors being seen. In situations with small amounts of RAM, DO NOT select it),
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft... Read more

Read other 3 answers
RELEVANCY SCORE 77.6

I've been getting a BSOD for quite some time. (about 3 or 4 months)
At first they would usually pop up when I've had the computer for most of the day, but recently they've just come as they please.
I've done a Memory Diagnostics and it showed no problems.
I've included from what I've read I believe to be a minidump of the BSOD.
I've decided to send multiple errors I found in my system event log just to be on the safe side since I don't know which errors I'm looking for.
If you could find anything that could explain what is causing this, please let me know.

Thank you.

A:Page fault in non page area BSOD

I've also read the sticky in the BSOD topic and completed steps 1-4.
I've included that as well.
Unfortunately, I do not know all the parts in my computer since I was not the one that bought them or put the computer together.

Read other 12 answers
RELEVANCY SCORE 77.6

Hello I'm Wayne

Windows version : Windows 7 Ultimate
PC Specs : Intel(R) Core(TM) i5-3340 CPU @3.10GHz 3.30GHz
RAM : 8.00GB
64 bit
Manufacturer : Gigabyte Technology
Graphics : Nvidia GeForce GT 630

I Got a BSoD with some of the following text " CDD.DLL PAGE FAULT IN NON PAGE AREA "
I ran the Chkdsk Tool on windows and scanned with AVG and got nothing.
I'm pretty sure it's a RAM related problem , but not too sure , so I downloaded the SF diagnosis tool to get info to upload , please evaluate the logs and see if you can see a problem , thanks.

A:Bsod , cdd.dll , page fault in non page area

Hello, WayneTrain welcome to the Forums. I will try to help you. First start off by uninstalling all of the Gigabyte utilities as they are known BSOD causers. Next, reinstall your graphics drivers using this method
NVIDIA Drivers - Avoid Problems

See if that makes any differences to your system. Your dump files showed


Code:
nvlddmkm
start end module name
fffff880`072ba000 fffff880`07da2000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Wed Jul 10 06:44:34 2013 (51DD4922)
CheckSum: 00ABC1B3
ImageSize: 00AE8000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
The drivers are pretty old and need updating.

Read other 4 answers
RELEVANCY SCORE 77.6

I've lately been getting the BSOD after installing all the Sims 3 expansion packs. It's really annoying me because i don't know what to do. I'm going to attach the mini dump files, because i saw that on a similar question. My drivers are fully updated. I've gotten the following information from opening files on dxdiag, i don't think it's going to help but hopefully.

OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name COMPUTER
System Model MS-7048
System Type X86-based PC
Processor x86 Family 15 Model 2 Stepping 9 GenuineIntel ~2992 Mhz
BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 12/02/2004
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
Total Physical Memory 3,584.00 MB
Available Physical Memory 2.68 GB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.95 GB
Page File Space 5.34 GB
Page File C:\pagefile.sys

and this

OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz, x86 Family 15 Model 2 Stepping 9
Processor Count: 2
RAM: 3583 Mb
Graphics Card: NVIDIA GeForce FX 5200 (Microsoft Corporation), 128 Mb
Hard Drives: C: Total - 152625 MB, Free - 16655 MB;
Motherboard: MICRO-STAR INTERNATIONAL CO., LTD, MS-7048, ,
Antivirus: None

Please help, if you need more info t... Read more

A:BSOD - Page fault in non page area

Your BSOD errors are being caused by nv4_disp.dll, which is an Nvidia graphics card driver. The BSODs are occurring while TS3SP03.exe is running, and TS3SP03.exe is related to SIMS3.

If the BSOD only occurs when playing the SIMS3, it would be difficult to blame the graphics card drivers. On the other hand, updating or re-installing the Nvidia graphics drivers might help.
 

Read other 3 answers
RELEVANCY SCORE 77.6

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+, x64 Family 15 Model 67 Stepping 3
Processor Count: 2
RAM: 3071 Mb
Graphics Card: NVIDIA GeForce 9800 GTX/9800 GTX+, 512 Mb
Hard Drives: C: Total - 476929 MB, Free - 61344 MB;
Motherboard: Gigabyte Technology Co., Ltd., M61PME-S2P
Antivirus: avast! Antivirus, Updated and Enabled
Cpu usage sits at high 80's low 90's when app's are running
iexplorer.exe running at 22,000 when explorer is closed

Hi, still new to finding my way round a PC, so be gentle
 

A:BsoD Page Fault in Non Page Area

Please follow this small guide to attach your minidump files so they can be analysed.
First locate your minidump files, open Windows Explorer and click on the C: drive in the left pane, in the right pane look down the list of folders and double click on Windows to view its contents. NOTE: If your operating system is installed under a different drive letter then look there. Scroll down the contents of the Windows folder and look for a folder called minidump and double click on it. You should now see the minidump files which will have a .dmp extension.

Zip up at least 6 of the most recent files into one zip folder (if there are less then just zip up what you have).
NOTE: To zip up the files in Windows (all versions). Right click the file, click on Send To, and then click
Compressed (zipped) Folder. That will create a zip folder containing a copy of the file, you should see it appear.

If there is more than one .dmp file click on the first one, hold down the shift key and then click on the last one. That should highlight all the files. Then right click in the highlighted area, click on Send To, and then click Compressed (zipped) Folder.

Below the Message Box click on Go Advanced. Then scroll down until you see a button, Manage Attachments. Click on that and a new window opens.
Click on the Browse button, find the zip folder you made earlier and click on it so it becomes highlighted and click on Open.
Now click on the Upload button. Wait for the Upload to complete, it ... Read more

Read other 1 answers
RELEVANCY SCORE 77.6

I have been having issues with the BSOD since I first turned on the Laptop. It was a very good price, so I kept it dispsite the BSOD problems.
I have checked the drivers and updated what was updateable.
I flashed the Bios as 1 newer version was available.

BSOD message changed between the Fault in non page area, one about NTSF. and one with no reason.

Originally the BSOD would pop up unexpectedly. I have to restored or repaired every time I start up the Laptop.
That has changed now, it seems to only happen at system start ups.
I can restart the laptop repeatedly with no problems once it is stable. As long as there is a very short off time ("restart"). If I turn it off for a few hours, overnight or for days; I have to start the repair / restore procedure all over again. Until it is stabilized. I have tried making a restore check point before turning off and going directly to the restore on thr next start up. This seems to be a temporary work around until I can find the cause and correct it. Also running a registry checker and repairing it has stopped the need to do factory resets as the system becomes more and more unstable with each BSOD.
Note: The clock does NOT lose time. So that rules out the internal battery?
I keep it plugged into a power outlet all the times. There are NO AC and Battery problems.


I hope you can find the reason for the crashes in the attached files.
I hope I have attached and collected the files correctly.

A:BSOD page fault in non page area

Please visit the below link for resolution :-
TechyKorner: Windows 7 BSOD error 0x00000050

Read other 3 answers
RELEVANCY SCORE 77.6

I was on the internet playing a game and all of a sudden the screen froze and crashed to a BSOD. The error was BSOD Page Fault in Non Page Area, I'm confused at to why this happened and was wondering if anyone could help me.

 

Read other answers
RELEVANCY SCORE 77.6

Recently my Windows 7 laptop has been giving me BSODs nearly constantly. I ran a malware scan with ClamWin and it seemed to stop it. It makes it stable enough to post this without going into Safe Mode. I've also noticed that my CPU usage is fluctuating quite a bit, from 17% to 98% then it crashes. I'm a relatively advanced user. Even if the BSOds stopped I need to find out what caused them and perhaps that will fix the CPU usage issue.
 

 

· OS - Win7 Enterprise (got it from a business that was going to junk them)· x86 (32-bit) or x64 ? X65· What was original installed OS on system? X64· Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM· Age of system (hardware) 5 Y.O.· Age of OS installation - have you re-installed the OS? No, I really· CPU i7 640 L· Video Card Integrated· MotherBoard - (if NOT a laptop)· Power Supply - brand & wattage (skip if laptop)· System Manufacturer HP· Exact model number (if laptop, check label on bottom) 2540p· Laptop or Desktop? Laptop
 

 

I also ran BIOS tests for hardware issues, no problems found.
 
Thanks for the help!
(If you're wondering why my name is Linux4Ever and I'm using Windows it's because the homeschool application I use doesn't support Linux)

Read other answers
RELEVANCY SCORE 77.6

I have been receiving seemingly random BSOD crashes. I get:

STOP: 0x00000050 (0xE62B8BFC, 0x00000000, 0x8045F843, 0x00000002)
PAGE_FAULT_IN_NONPAGED _AREA
*** Address 8045F843 base at 80400000, DateStamp 41773335 ntoskrnl.exe
Beginning dump of physical memory
Physical memory complete. Contact your system administrator or technical support group

I have removed any software/hardware that was added around the time the crashes started.
I've defragged- hard drives and pagefiles. I've run spyware and adaware removers. I've done memory tests. I've set my pagefiles to zero, restarted, then set them to the recommended values...
I've dusted the computer, and moved my one piece of RAM to the other slot.
The crash does not occur when the computer is idle- only when I am using it. The crash does not seem to be linked to any specific programs I run, for I have ran different combos of programs, as well as no programs at all when the crash occurs.
My startup programs are:
atwtusb.exe beta
s3apphk.exe
mobsync.exe
vptray.exe
adobe gamme loader.exe
ultramon.exe

I am running win2k SP4 on a Compaq Presario 7360.
To install 2k I had to install 98SE first and then add 2k. I don't know why the 2k boot disks do not work, but that's a whole different issue.
I have no little excalmation point icons in my device manager.
I really don't know what could be causing the crash... any help in determining what the culprit is is greatly appreciated.

If I missed any ... Read more

Read other answers
RELEVANCY SCORE 77.6

I keep getting blue screens but I don't remember what most of them say. I can't remember where the log is. (I'm pretty sure there is one, right?)

I don't know what is causing these. It seems like I just keep going AFK and come back to a BSOD. One of them said something about a "page fault in a non page area", or something like that.

I'm not sure what to do.

A:BSOD "Page fault?"

This can be caused by faulty RAM. You should run a RAM diagnostic test.http://www.memtest.org/

Read other 21 answers
RELEVANCY SCORE 77.6

Getting page_fault_in_nonpaged_area very frequently. It's very frustrating. Running W7 Home Premium x64, tried formatting my disk and reinstalling windows, still getting BSOD's. The system itself is only 2 months old, if that.

Files attached. If you need anymore information just let me know.

A:Page Fault BSOD

Two issues. AVG, and Norton.

Symantec (and AVG) are frequent causes of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

Download tools and utilities | AVG Worldwide

Read other 9 answers
RELEVANCY SCORE 77.6

When starting some programs I get this Page fault In Nonpaged Area
Then BSOD Reboot And Things Seem Fine
Please see Dump File

Thanks billy
Attachment 59780

A:BSOD Page Fault

  
Quote: Originally Posted by billyh


When starting some programs I get this Page fault In Nonpaged Area
Then BSOD Reboot And Things Seem Fine
Please see Dump File

Thanks billy
Attachment 59780



Hi Billy and welcome
Straight foward... Memory corruption

I would download memtestx86 and run it for 5 passes to check your memory for errors and possible heat issues.

Let us know the results

Ken


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\030910-19141-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02e68000 PsLoadedModuleList = 0xfffff800`030a5e50
Debug session time: Tue Mar 9 23:00:09.712 2010 (GMT-5)
System Uptime: 0 days 4:55:36.414
Loading Kernel Symbols
...............................................................
................................................................
..........................
Loading User Symbols
Loading unloaded module list
.......................
********************************************************************... Read more

Read other 2 answers
RELEVANCY SCORE 77.6

Hi,

I am currently using an Asus eee pc 1005ha netbook. I get a blue screen when I start up and get the error code 0x00000050 PAGE_FAULT_IN_NONPAGED_AREA. When I try to boot in safe mode, I get hung up at Mup.sys. I can't boot into the last known good conformation. I tried swapping out my memory, but I still got the same stop code. Any ideas?

Thanks so much.

Read other answers
RELEVANCY SCORE 77.6

Hi all...

Got another BSOD today, but this one with a different message from the last one. Can anyone help?

Many thanks!

Rob

A:BSOD.. Page Fault? Help

Hi all... cancel my last, it's been solved.

Not sure what the exact problem was, but ran memtest and straight away it reported an error. I recently disabled something in the BIOS to stop the message below appearing. Now reset it to what it was before, and memtest is not reporting any errors.

http://i1189.photobucket.com/albums/...creen-Shot.png

Read other 1 answers
RELEVANCY SCORE 77.6

Roughly 3 hours ago my ati catalyst followed by mozilla firefox crashed, at first I thought my gpu overheated (or that the horrible horrible gamebryo garbage of a game was the cause) but bluescreen followed almost immediately after
I did not pay much attention to it until 3 subsequent bluescreens occurred right afterwards due to page_fault_in_non_paged_area (I did not manage to confirm it was present in all 4 instances but assumed it was) neither I did manage to obtain the error code as of yet
system also requested scan of C drive (only once)

knowing there were no changes to drivers, av softwares or anything similar I started dreading that hardware might be the cause
I've run mdsched.exe which immediately detected hardware problem

my setup:
Win 7 Ultimate 64 bit
8gb ram (2x4gb kit)
Intel i5 760 (if my memory serves right)
ati HD6950

my questions are:
is mdsched.exe's diagnosis 100% accurate ? (as I don't want to rush into decisions in case something else may be the cause as well, see dumps below)
is it likely that only one of the sticks (2x4gb kit) is broken ? if so am I to remove one and see which one is the faulty one ? can I do this diagnosis with mdsched.exe alone ?
can I safely keep just the one for the time being ? can I pair any single 4gb stick with one from the dual kit ?
could the failure be caused by something specific (software related operations for example) or is it just a result of natural deterioration ? (even though they are barely 2 years ... Read more

Read other answers