Over 1 million tech questions and answers.

Dell Optiplex 3040 SFF cannot PXE boot windows 7 image

Q: Dell Optiplex 3040 SFF cannot PXE boot windows 7 image

Hi,
I am trying to create a windows 7 image to the new PC's that we have just purchased. On boot after pxe network boot I get the message "Please add the network driver to the windows PE image on Windows Deployment Services." I have added many drivers to WDS with no luck and the correct one from the dell website errors and will not let me added it. I have the packaged the drivers into the install.wim and boot.wim using the AIK but still no luck. The drivers from the dell website do not seem to work in the PE environment. I'm hoping that someone has done this before and can point me to the correct driver. I have been looking for the best part of two weeks and i'm sure it can't be this hard.
Thanks in advance!

RELEVANCY SCORE 200
Preferred Solution: Dell Optiplex 3040 SFF cannot PXE boot windows 7 image

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Dell Optiplex 3040 SFF cannot PXE boot windows 7 image

Hi Ihint,Thanks for posting.Please see this YouTube video for assistance: http://dell.to/2tMiDOH

Read other 1 answers
RELEVANCY SCORE 92.4

Hello
I am using MDT 2013.  I've imported the driver pack for the OptiPlex 3040 from Dell for Windows 7 x64.  After MDT installs the OS, it reboots into Windows to begin initialization but it never finishes.  Instead it reboots again and goes into the Dell Diagnostics utility and runs a test on memory. 
After the test runs, it tries to boot into Windows and I end up selecting "last know good config."  It finally loads windows but then none of the USB ports work.  I have to remote into the pc to manually install the USB and chipset drivers to finish the MDT deployment process.  This has happened on multiple machines and is a repeatable process.  Is anyone else having this issue? 

A:Dell OptiPlex 3040 Windows 7 MDT Problems

Did you either manage to resolve this issue? Or did you always have to go through last good config?
I'm trying to get Windows 7 x86 to install on both a OptiPlex 3040 and a Latitude E5570 with no joy. The previous models were fine.

Read other 5 answers
RELEVANCY SCORE 87.2

How to install Windows 10 on a Dell OptiPlex 3040 MT coming with Windows 7 Pro x64 installed (and which includes a Windows 10 Pro license)?
The system comes with a DVD labeled Windows 10 Pro x64 reading "use to reinstall the operating system on a system with OS installed"

A:(Redirected) Dell OptiPlex 3040 MT Windows 7 Pro (include Windows 10 Pro license) - How to install Windows 10?

Best to post this in the Windows 10 forum here:http://en.community.dell.com/support-forums/software-os/f/4997Bev.

Read other 1 answers
RELEVANCY SCORE 85.6

How to install Windows 10 on a Dell OptiPlex 3040 MT with Windows 7 Pro preinstalled (includes Windows 10 Pro) ?
The system comes with a DVD labeled Windows 10 Pro x64 and reading "to be used on a system with an OS installed and to be used only to reinstall the operating system".

Read other answers
RELEVANCY SCORE 85.2

I have just purchased these for school and need to split the HDMI to 2 x VGA to run the interactive board & the monitor - anyone else out there doing this?

Read other answers
RELEVANCY SCORE 85.2

So I recently got a Dell Optiplex 3040 SFF for a good deal. It came with an i5 6500, 1TB HDD and a Single Stick of 8GB DDR3L. I've been reading the specs for the Optiplex 3000 series and they just came with an i5. I was just wondering if it's ok to replace the CPU with an i7 6700 non K, since i have one just lying around. I'm also planning on adding a low profile GTX 1050Ti (Msi probably) Will the 180W PSU that came with the computer support those upgrades?

Read other answers
RELEVANCY SCORE 85.2

I've disconnected default SSD (Samsung) in order to connect new emty SSD (Transcend). I was in need to clone my laptop's HDD on this new SSD as a transit SATA port, because I've got only one SATA to USB connector, used by laptop's drive. I've successfully cloned my drives, disconnected all new drives, connected default SSD (samsung) and - no OS boot. I've not changed ANY BIOS settings.
Ok. I've a look on BIOS settings, and I see NEW (almost disconnected) SSD (Transcend) as bootable device. And NO Samsung SSD in boot device. Only Transcend which is no more connecned to motherboard. In SATA I see only Samsung SSD connecned, but I don't see it in BOOT section. 
I've restored to factory and than to default settings with no effect. Than I've cleared CMOS - no effect. I see disconnected SSD device in BIOS BOOT section. What I'm doing wrong?

A:Dell Optiplex 3040 SFF

I've changed firmware of my BIOS. Downgraded it up ti 1.2.3 version, than upgraded it again. No effect. Old SSD doesn't appear. BUT in Legacy boot disconnected drive is still present. I cannot delete it. cannot change it to connected SSD drive. I guess it's somewhere in Legacy Option ROMS, and must be changed - but there are no options in this BIOS section. I'm gonna hate UEFI

Read other 1 answers
RELEVANCY SCORE 85.2

Hello everyone . Just want to ask , can pentium g4560 work in dell optiplex 3040 ? Both of them got same socket 1151 .

Read other answers
RELEVANCY SCORE 84.4

I've ordered a Dell OptiPlex 3000 3040 SFF desktop, and need to install a serial port. Can anyone tell me what will be compatible for this hardware? E.g. Will a standard low profile PCIe card be installable?
Many thanks,
Martin.

Read other answers
RELEVANCY SCORE 84.4

I replaced the CPU on my Optiplex 3040 SFF that originally had an i5 6500 with an i7 6700 I had that was just lying around. It booted up into windows but when i check the system information it still thinks that it has an i5? Is it going to cause issues in the future and should I reformat my windows? Thanks for the answers.

Read other answers
RELEVANCY SCORE 83.6

 have recently taken delivery of 150 Dell Optiplex 3040 PC's all with the same specification.
I am trying to image then using MDT.
Before taking delivery of all the PC's I took a sample of 2 to test with to make sure I could create an image and deploy it. This worked without any problem using Litetouch and a defined sequence. Happy days.
I then took delivery of the remaining PC's and tried to apply the same image. However this fails on every PC I have tried apart from the initial 2 samples and it is driving me crazy. PC spec is identical for all PC's and there is only one W10 cab available from Dell that I am using for drivers.
I get a black screen  stating
windows failed to start. A recent hardware or software change might be the cause.
Status Oxc000001
A required device is not connected or can't be accessed.
This happens as the process seems to be connecting to the Litetouch image so I think it might be a possible NIC issue, even though it does successfully connect to the WDS deployment server.
Any suggestions?

Read other answers
RELEVANCY SCORE 83.6

Have speakers that worked on old computer.  when I'm on the speaker/headphone tab of the dell audio setup, and click the speaker icon... there IS noise coming through them.  But no noise when I try youtube or even a video on the dell website.  The sound is not muted, and the when I click on the sound icon down by the clock/date, it appears that there is sound coming through.  Speakers are on, volume is up.  What is going on?  How do I fix it?
TIA
Byrdie

Read other answers
RELEVANCY SCORE 83.6

I bought new memory for this computer... Kingston KCP3L16ND8/8 8gb 1600mhz Low Voltage Mod Mem which is supposed to be DDR3L-1600 UDIMM, but I only see one slot that looks like a memory slot in this box.... and the stick is too long for the slot.  Am I supposed to be looking somewhere else (like under something) for it?  Is this the wrong memory?  The Kingston memory finder said this was the memory for this system. I have 8gb and it is supposed to be expandable to 16.

A:adding memory to dell optiplex 3040 SFF

Is this the small form factor, or the micro form factor?  The micro version uses notebook type soDIMM (shallow profile) memory.

Read other 1 answers
RELEVANCY SCORE 82.4

Hi there,
I've got a Dell Optiplex 3040 in my workshop at the moment. The computer seems to turn on: there's a light on the PSU, the HDD indicator flashes, the num lock toggles on and off and the traffic light on the ethernet port is active. However, there's no output from the HDMI port or the display port. The machine only has onboard graphics.
I'm thinking that the onboard graphics are at fault, but I don't have a graphics card that will fit in with the PSU in it's current location.
Any ideas for fixes on this? Thanks in advance!

A:Dell Optiplex 3040 - Boots but no video output

Did you try a diff monitor and new cable? Hard to solve this without any screen. Which model do you have? Only a couple of model 3040's support a discrete card. If you don't have MT or SFF model you can't install a card.
Supports optional discrete graphics (MT/SFF only): AMD Radeon? R7 350X, AMD Radeon? R5 340X

Read other 3 answers
RELEVANCY SCORE 81.6

Recently Bought Dell optiplex 3040 and installed windows 10 pro 64bit operating systems, but accidently keyboard (model: kb216p) which i received with pc not working. while replug it is trying to download driver but no success. i hope you will give a solution asap.Yours Truly,Mohammed Palakunnu

Read other answers
RELEVANCY SCORE 81.6

I need some tech support on this computer/monitor combo…
I have the one monitor hooked up display port-displayport, it works fine.  The second monitor is hooked up monitor-DELL display port-hdmi adaptor, then HDMI cable to HDMI port on computer.  Computer sees the display port monitor only.  both monitors are set to monitor the display port .  Let me know asap, thanks..

I have the dual Dell displays, they only have Displayport and maybe DVI connectors...  brand new Optiplex 3040, had display port and Hdmi ports for video, need them both active at the same time to run the dual display...... OR does dell make an adaptor to run its dual display from one display port?

A:Dell Optiplex 3040 cannot use both HDMI port and Displayport at same time?

Optiplex 3040 onboard video out ports = HDMI, DP
A computer HDMI out port cannot up convert to a monitor DP in port via a straight cable. What you bought is designed to do the opposite; down convert a computer DP out to a monitor HDMI in port.
You would need to add an HDMI to DP Active Converter.
Computer HDMI out --> HDMI to HDMI cable --> HDMI in to DP out converter --> DP to DP cable --> Monitor DP in

Read other 12 answers
RELEVANCY SCORE 81.6

Recently Bought Dell optiplex 3040 and installed windows 10 pro 64bit operating systems, but accidently keyboard (model: kb216p) which i received with pc not working. while replug it is trying to download driver but no success. i hope you will give a solution asap.Yours Truly,Mohammed Palakunnu

Read other answers
RELEVANCY SCORE 80.4

I have just configured an Optiplex 3040 for a customer to run Virtual XP machines for his CNC mills.
I upgraded from windows 7 Professional to Windows 10 64 Bit Pro as the replacement CAD/CAM software he is trialling needs this 64 bit OS.
Apart from a lot of research to find out why I couldn't boot from the Windows 10 DVD media to install Windows 10 (not included in the Dell FAQs) everything runs OK. However there is one niggle in that on boot the Numlock doesn't stay on.
I have checked the bios and the relevant setting in the Post section is ticked and the Numlock LED comes on during Post but then goes off as Windows 10 loads. This is not a big problem but rather annoying as the customer uses the numeric keyboard a lot for data entry of measurements.
Is this a bug in the Dell Bios or is it something to do with UEFI?
Many thanks 
Fozzie

A:Optiplex 3040 - Numlock does not stay on after boot

On some Inspiron models, disabling Fast Startup from inside Windows 10 fixes that problems. So you might try that....
1.Type Control Panel in the search box.
2.Click Control Panel.
3.Click Power Options.
4.Click Choose what the power buttons do.
5.Click Change settings that are currently unavailable.
6.Scroll down to Shutdown settings and uncheck Turn on fast startup.
7.Click Save changes.
8. Reboot

Read other 1 answers
RELEVANCY SCORE 80

This machine is not connected to a domain. It is in a homeoffice workgroup with full local admin rights.The feature updates 1607 and 1703 will not install during Windows Update. They fail constantly. I tried downloading the standalone installers for them but they fail as well stating that they are "not applicable to this computer". I even downloaded the standalone installer for creator update 1709, which had not yet shown up in the customers Windows Update just see if it would work and it failed with the same message as well. I've uninstalled the antivirus and tried the Windows Update reset procedures outlined on Microsoft support help article 971058 but same issue. Before resorting to reinstalling Windows I was hoping maybe someone here could shed some light on the situation. As a sidenote, all other Windows updates work fine. Its just those 3 that fail.I know this is primarily a hardware forum but I posted here to confirm a claim from a tech who responded to this question when I posted it on Reddit claiming these creator updates were not compatible with these Dells which makes no sense to me.
Thanks in advance,
Adam

A:Dell Optiplex 3040 with Win10 Pro - Creator Update 1607 and 1703 will not install

A general comment.  The Windows version you have may be an issue.  Its not that its not compatible with Dell, its that some updates will not install on Enterprise versions as they leave it up to the corporate IT department on when/if they want to implement the updates on corporate systems.
Considering you have an OptiPlex (one of Dell's business system lines) this may be the case.

Read other 2 answers
RELEVANCY SCORE 74.8

On January 10th a new BIOS update was released for the OptiPlex 3040 which added 'Windows 10 Enterprise support'.
As we run Windows 10 Enterprise on these machines I'd be interested to know what support this BIOS update actually adds and whether we need to spend the time updating the existing machines.

A:OptiPlex BIOS 3040 1.4.11 and Windows 10 Enterprise

This is mainly a user-to-user forum and only Dell can answer that question.
If your company has an assigned Technical Account Manager, that person may be your best resource.
I guess you could update one of them and see what changes and/or new options are available in BIOS...

Read other 1 answers
RELEVANCY SCORE 73.2

Hello Support Users,
I'm having an issue with the OptiPlex 3040 Intel HD Graphics 530 Driver for Windows 10 Pro. The machine will work fine for awhile then while certain applications like Microsoft Excel are running, the machine will stop working and give the following error:"Display driver igfx stopped responding and has successfully recovered."
This machine has 2 monitors so using the Microsoft Basic Display Adapter doesn't work, even googling if that works or detects such is almost absent. I'm just letting whoever know it doesn't work with dual monitors on Windows 10 Pro.
I've found this link and installed the following display driver to see if that clears the issue + adjusted some PC settings in "Advanced System Settings" Under This PC : Windows still chooses what to do for visual effects and Virtual Memory is now 4096MB. I've also added the TdrRelay = 10 to the GraphicsDriver section in Registry.
Here is the link that's been suggested and the steps I've taken so far, I did skip the DELL driver and went for the initial Intel Generic Driver instead.
Is anyone else facing this issue with their onboard graphics?
Thread I've used so far to troubleshoot:www.intel.com/.../000005482.html
Any suggestions which could help or solutions for this PC?

Read other answers
RELEVANCY SCORE 73.2

We have a number of Optiplex 3040 units that we purchased from DELL. These have been downgraded to Windows 7 SP1 using the Windows 10 downgrade licensing from DELL. They have the DELL factory Windows 7 Pro SP1 image on them. When trying to activate Windows, the activation fails. We pulled the OEM KEY from Windows and SMBIOS and had it checked on Microsoft site and there is a problem with the key according to Microsoft. We have tried DELL level 1 support who then transfered us to a REC tech for higher level support but communication with this Resolution Expert Center analyst has been awful.  I have seen very similar issues in this forum but have not seen a resolution. Need Help

Read other answers
RELEVANCY SCORE 72.4

I posted this earlier, but I didn't see it listed... Here it is again.
I have a syspreped Windows 7 Enterprise 64 bit image that will successfully install on any make / model of Dell or Lenovo computer that our agency uses, but not on a Dell OptiPlex 7010 workstation.
The syspreped Windows 7 image is a clean install with just the OS with updates. No other applications are installed.
After the image is installed on a Dell 7010 and reboots, OOBE setup starts and get a blue screen error when installing devices. It makes to about 70% before getting the blue screen error.
On reboot after the bluescreen, OOBE setup will continue briefly then displays the following error: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click “OK” to restart the computer, and then restart the installation."
I think the USB 3.0 drivers are causing the problems. I know the Regedit fix to get past this to finish OOBE setup, but it is a manual process.
Our agency uses LANDesk to image computers. The whole process is automated start to finish.
We mainly use Dell desktops and Lenovo laptop in our agency. The same image installs flawlessly on all of them except for the Dell OptiPlex 7010 desktop. What is different about the Dell 7010?
We even had the same issues before using LANDesk. We previously imaged computers with Acronis.
The image will not get through OOBE setup on a Dell 7010 without getting a... Read more

Read other answers
RELEVANCY SCORE 72.4

Recently our secretary informed me that in the past 2-3 months she had a strange occurrence twice:
The 3040 micro (running windows 10) was locked and making a beeping sound (she couldn't describe the pattern, but must had been very noisy since she mistook it with an alarm going off)
On the monitor there was a blue (not 100% sure about the color) screen, with a big computer icon in the center, no description or text whatsoever, no windows taskbar or anything. Underneath this central icon, was a smaller one with a speaker icon that you could click on (from what she explained the mouse was working) muting the beeping sound.
The only escape route was the power button of the computer.
At first I thought it must have been the new Windows 10 BSOD. When I googled it though, I couldn't find any similar incident, the BSOD appears different from her description too. I checked the event log, but there was nothing critical or error that I couldn't account for. It has Kaspersky internet security installed and it's up to date so I doubt it's some virus/malware; Plus the computer is new (4-5 months).
Now I'm wondering if it was indicative of hardware failure or power surge. I asked her to take a photo next time she sees it, but I thought I'd ask here in the meantime.  - I've seen computers coming up with a screen from the MoBo informing me that the computer was locked in order to avoid damage from a power surge that just happened. But never seen one with ... Read more

Read other answers
RELEVANCY SCORE 70.8

In Optiplex 3040 - There is no option to choose 'ATA' mode from  BIOS. 
Due to this, i am unable to deploy windows 2008 server on optiplex 3040. 
"Once i boot from USB and try to deploy the windows, the setup is asking for the "windows deploy share path". 
Please advise how to enable 'ATA' SATA operation mode in optiplex 3040 BIOS and install windows 2008 server.

Read other answers
RELEVANCY SCORE 68.4

Hi please help i have got a dell OptiPlex 755 (discontinued model)

i boot up that takes a bit longer than normal then it goes to the windows 7 logo twirly thing it pauses half way through a flash of blue screen (too short to get a code) then it restarts i can then go to the option to start up recovery or start normally i go to recovery it scans my system wants to send something to Microsoft. i have also tried boot rec.exe that didn?t work

i have just got hold of windows vista and xp instillation disk i am going to try that.

Please help

Also see my vid of what it does http://www.youtube.com/watch?v=KJ6rwHmGNhk

Thank you

A:windows 7 dell optiplex 755 boot fail

You could download the appropriate .iso file, burn it to disc, and then try to repair your computer.

Official Windows 7 SP1 ISO from Digital River ? My Digital Life

Read other 3 answers
RELEVANCY SCORE 68

in the past with the optiplex 3020 I was able to connect a VGA monitor even thru the DP, by getting a $10 converter from DP to VGA.
in the 3040 model, they dont work. not a DP-VGA nor does the HDMI-VGA work.
Is there any way for me to get my VGA monitor to work on the 3040 computer? Even just one monitor would help. Or would I have to buy a new monitor with digital connection??

Thanks,
Shia

A:Optiplex 3040 with VGA

What form factor 3040, mini-tower, small form or micro form?
Do you have an add-in video card or only onboard Intel video?  A VGA port was extra-cost option on the 3040.
Have you checked BIOS setup to make sure the video output is set to Auto?

Read other 2 answers
RELEVANCY SCORE 67.6

Hi

I have been using my machine (winXP Media Center) fine since I purchased it but I went to boot the pc this morning and it will not boot windows. All that happens is the dell screen loads (the white bar fills up) then all that appears is a black screen with a cursor blinking in the top left corner?? How can I fix this?

I have looked all over the net but cannot find the answer, thanks!
 

Read other answers
RELEVANCY SCORE 67.2

Using Optiplex3040 SFF came with 128GB SSD..Its HDD bracket has sendary 2.5" HDD mounting space, but doesn't have spare SATA port nor power socket. (Has 2 SATA port on board. 1 is being used by ODD.)Do you think we can add sendary HDD to this model?

A:Can Optiplex 3040 SFF install 2nd HDD?

Only externally - not internally.

Read other 1 answers
RELEVANCY SCORE 67.2

Hello,
we encounter a strange problems to operate the wake on lan with dell optiplex 3040 , when the PC is turned off you can turn it back on if the magic packet  is sent within 5 or 10 seconds .Afters this no more WOL is possible. 
bios options are (ver 1.4.3) :
deep sleep control = > deactived
Wake on lan => lan only
block sleep has tested => ko
3 versions of the realtek drivers lan card has  been tested with unchecked power options , and then test by disabling some option .. nok the wol is not stable
Few version of windows . Tested OS : Windows 7 Pro and Windows 8.1. (With or without deactivating the Quick Start ) 
This is not append with other optiplex (7010, 7020 and 790)  model on same site with same switch and routers. 
Lan card is a Realtek PCIe GBE Family Controller (DEV_8168). 

 Any idea ? 
Thanks 

Read other answers
RELEVANCY SCORE 67.2

Hi, I tried to replaced the original 4GB non-ECC ram with 2x8GB ECC MT18KSF1G72AZ-1G6 ram but system tilt with beep sound. I tried to mix 4GB non-ECC with 8GB ECC ram and system prompted it doesnt support mixed ECC and non ECC ram. I upgraded the BIOS to latest 1.46 but it doesnt help. May I know how to install these 2x8GB ECC MT18KSF1G72AZ-1G6 ram to Optiplex 3040. Thank you

Read other answers
RELEVANCY SCORE 67.2

Hi! What is a name for a part number or flex connector capable into motherboards optiplex 3040 for VGA displays? See the pic. TY and sorry for my bad english....

Read other answers
RELEVANCY SCORE 67.2

First I want to re-emphasize just how bad Dell support is. I went through something similar with an Optiplex 3020 32-bit video driver for Windows 10. Dell doesn't care about problems. They just wanted a credit card. Here we are again....
There is a problem with the Optiplex 3040 and SSD drives. I have four of them out in the field that will, on occasion, reboot for some reason (has to have something to do with the SSD) and when they reboot it immediately goes in to diagnostics and says there is no hard drive present. The fix is simple. Turn it off and turn it back on and it boots fine but there is obviously some conflict with the Optiplex 3040 and SSD drives.
So... I get in chat with Dell and guess what? They don't care. It isn't their problem. They would be interested if I gave them my credit card info. So I took it a step farther and asked is there was some kind if database with reported issues by model. I was told no! You got to be kidding! Dell gets reports of problems and they don't document it or take it serious???? What a jaw dropper. I know Dell support was horrid, always has been, but this goes beyond horrid!
So Dell is obviously clueless. Any users have issues with the Dell Optiplex 3040 and SSD drives like I am having?

 

Read other answers
RELEVANCY SCORE 66.4

I have an optiplex 3040 with a display port to VGA adapter connected to an Acer 24" monitor.  Every other day or so the screen will have flickering horizontal lines on it periodically throughout the day.  Sometimes powering the monitor off/On resolves this sometime it doesnt and they go away on their own..... One day the screen had horizontal pink lines going across it.  That time it didnt go away until I power the monitor off/On.    I tried a HDMI to VGA adapter, I tried a different monitor, updated bios and video driver.  Any thoughts or suggestions?

Read other answers
RELEVANCY SCORE 66.4

We have a number of receipt printers that we've been using via serial cable. With some new software in the future, I've been moving them from serial to USB and have had no issues. We did have to order about 8 new PCs and I can't get the receipt printers to work on any of them. The printer vendor hasn't been very helpful so I'm kind of stuck. I'm installing the printers the exact same way but when I power them on, Windows is saying it can't recognize the USB device and it's showing as Unknown Device in Devices and Printers and Device Manager. All of the PCs, new and old, are Windows 7 x64. The only thing that's different with the new ones may be the USB ports. They're Dell Optiplex 3040 Micro computers that have 2 - USB Charge ports | 1 - USB smart power on port | 3 - USB 3.0 ports. I believer our old PCs all have USB 2.0 ports, which may be the problem. Doing some research, it appears that the 3040's use xHCI on the USB ports which sometimes cause issues with legacy drivers. Is there a way to disable xHCI and see if that's the issue?

A:Disabling xHCI on Optiplex 3040

XHCI is XTENSIBLE HOST CONTROLLER INTERFACE aka USB 3.0  You cant disable this unless you don't care if NONE of the USB ports work properly.  There is no such thing as making USB2 drivers work with USB3 ports.  There is also no support for Skylake and 3RD party USB Serial printers and Drivers here on the Dell Site.
Dell makes Special Windows 7 builds for Skylake.  There is NO Downgrade Rights for Home Versions of Windows 10 only the PRO versions.  And Dell is not obligated to provide you with downgrade media.   There is support for windows 7 on newer dells but its not free.

You must install the eXtensible Host Controller Interface drivers for windows 7 as well as the CHIPSET Drivers for windows 7.   Skylake Systems are NOT SUPPORTED with windows 7 by microsoft.
Only WINDOWS 10 is supported.
Otherwise you have to find OLDER Dells and use them.
https://www.walmart.com/ip/112687721
 

Read other 1 answers
RELEVANCY SCORE 66.4

I have connected a monitor to the displayport with a DVI converter, and DVI cable and installed a DELL DVI card to the PCI port and connected an other monitor also with DVI cable to this DVI card.
PC does not see the DVI card/monitor. I have tried it with other optiplex 3040 and other DVI card but got same results.
What can be wrong in this configuration?
Thank you 

Read other answers
RELEVANCY SCORE 66.4

Hi dears ,

I bought new Dell OptiPlex 3040 mini tower the CD room is on horizontal but Dell logo is vertical ?

Should I use it as vertical or horizontal ?

I prefer Horizontal for space .

thanks in advance 

A:OptiPlex 3040 HORIZONTAL or VERTICAL

You can lay it on one side but not the other because the DVD would be upside down and vents would be covered.  

Read other 1 answers
RELEVANCY SCORE 66.4

Need a solution to run 3 monitors on an Optiplex 3040 SFF. Desktop has one HDMI and one DP integrated into motherboard.
Are there any inexpensive y-adapter solutions or would I need a new video card?
If new video card needed, any recommendations?

Read other answers
RELEVANCY SCORE 66.4

So, we have a wee 3040 here that my mates kid is using. Hes got his hands on a generic 8gig stick of PC 12800 and planked it into the 3040 along with the existing 4gig stick and it wont post. As we have other parts about we tested the following1: Its own normal 4 gig stick  - POSTs2: the new 8 gig stick on its own - wont POST3: the new 8 gig stick with the original 4 gig stick - wont POST4: the new 8 gig stick with another 8 gig PC10700  - wont POST5: two sticks of 8 gig Pc10700  - wont POST6: put the new 8 gig stick in another system on its own or with other memory - POSTs fineso from what I can tell the issue is with the optiplex itself, have to confess ive never seen this and we use 3020's and 3040's in work so not exactly unfamiliar with them.Any suggestions, Anyone seen this before?
 

Read other answers
RELEVANCY SCORE 66.4

I have a new Optiplex 3040 running Windows 10 and are trying to add a PCIe Parallel port card to it but windows does not recognise the card. I have tried digitus and Unitek ( Y5707 ) with the latest WIndows 10 drivers supplied from China but no go !!
Can anybody help please ?
Michael

Read other answers
RELEVANCY SCORE 66.4

Hi All,
I'm just curious what the maximum number of displays is for this model.  I've only got the Intel 530 Graphics no extra AMD or NVidia card.
The reason I'm asking, is I'd like to add one or two USB video adapters, and want to be sure that the 3040 can actually support the additional displays.
From the Features and Design page:"Support for two displays: DisplayPort, HDMI and optional VGA connectivity allows greater visibility of your tasks. "
But I think that's is just referring to the built in video outputs.
Thanks!

Read other answers
RELEVANCY SCORE 66.4

Hello,I have dell OptiPlex 3040 Mini Tower. In the owner’s manual it shows that there is on option for SD Card Reader that can be installed in this computer, but I am unable to find any information about it – part number, link, specs or anything else about this card reader on Dell’s website. I would like to purchase and install one in my computer, but I cannot figure out how to order this part or accessory. Any help or suggestion would be much appreciated.Thanks

Read other answers
RELEVANCY SCORE 66.4

I would like to replace the PSU on the 3040 MT with an EXTERNAL aftermarket unit. First, I need more power to run a better GPU and multiple drives. Second, I prefer the heat outside the case anyway. I am using the Moddiy 24-pin to 8-pin Dell Mobo adapter cable.
Someone said that the Antec EarthWatts EA-380D Green would NOT power on my computer (actually they said the EarthWatts series would not work) though they failed to elaborate in any way as to why.  
According to the specs I can find, there is no reason why it should not work provided the cables are run correctly.
Is there anyone here that can expand on WHY or the EarthWatts series will not work? If it does not work, can someone please recommend a PSU of 400 watts more or less that WILL work. Again, provided the cables are taken care of.
Thanks very much!

Read other answers
RELEVANCY SCORE 66.4

I bought a computer identical to the DELL optiplex gx280 I own. I wanted to swap the hard drives but when I did and booted up the new (to me) computer, I got the message INTEL ACCELERATED SVGA BIOS .....DECOMPILATION OR DISASSEMBLY PROHIBITED....so did I permanently wreck something?
 

A:Solved: dell optiplex gx280 windows xp boot error message

Read other 8 answers
RELEVANCY SCORE 65.6

These are brand-new-in-box and spit out 0xc004c008 when attempting to activate stating that the key has been used before.
I have done all windows updates and used dell command to update drivers and firmware.
Somewhat related as this is why I'm here and not on the phone with dell yet: When I enter the Service tag number, on the dell website it tells me I'm out of warranty (bought December 6th this year) and that if I want to speak to an agent it's going to cost me.

I'm in Canada if that makes a difference.

Read other answers
RELEVANCY SCORE 65.6

I am not able to find the usb drive when using the system restore disk. If the system boots up it will find the usb just find and fill exists in the  root WindowsImageBackup directory on the usb. The system are brand new and 3040 model with windows 7  64 bit. It seems OptiPlex 3020 worked just fine and found the image location but all my 3040 do not find them. I talk with Dell support for 4 hours and they just though it was a bad motherboard...I said I did not think so since all of the pc I have will not find the usb during system restore.
I check the BIOS also legacy is on and rom is on. Boot order hard drive, usb. cd/dvd . I hit f12 at start up and select cd/dvd to boot where my recovery disc is. and opens fine but never sees the usb drive to find my image.
Could I load usb driver from C: drive? If so which one?

Thanks in advance!

Read other answers