Over 1 million tech questions and answers.

Problem in Adjusting Screen Resolution

Q: Problem in Adjusting Screen Resolution

Hey Friends,
I have Samsung Sync 15000:1 19' inch LCD Monitor with Native Resolution of 1600x900 & Windows 7 is installed in my PC.
Last time i was playing GTA & Suddenly PC Switched off Automatically due to Power cut.
After that i started PC & saw that 1600x900 Resolution is going out of screen.... & i cant even Adjust it through Monitor Buttons!!!
I Tried System Restore but even that didnt Helped
I changed Graphic Card of NVidea 9400GT to GeForce 7025 & yet 1600x900 is going out of screen
& now only 1280x1024 Resolution can be adjusted to see everything Properly........ But its not as sharp as 1600x900 was
i want that back!!! Can anyone tell me Solution?????
Even Re Installing Graphic Drivers Didn't Help me!!

RELEVANCY SCORE 200
Preferred Solution: Problem in Adjusting Screen Resolution

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Problem in Adjusting Screen Resolution

Do you have the latest drivers for your monitor installed?

Read other 4 answers
RELEVANCY SCORE 86.8

Hi everyone!
I have a problem when i start using Win7 and adjust my screen resolution...
when i adjust the resolution to 1206x682 or higher, the whole windows become larger and eventually become larger than my screen. So i can see only part of my taskbar. However, this will not happen when i use XP.
Is this normal?
At this time i can't use any video editing software as they require 1024x768 or higher resolution, what should i do?
Sorry for my poor English. I am still an English learner.
thanks!

UPDATE-----
when i set to a higher resolution in XP, the icons are smaller and the size of the windows doesnt change. But when i do this in 7, the size of icons doesnt change but the whole windows become larger.
SCREENSHOT-----
In 1820x720: (im using a Chinese Win7)

but in 1206x682:

A:Problem when adjusting screen resolution

Hi Son, welcome to the forums Hereis a link to the drivers for you're video card NVIDIA DRIVERS 257.21 WHQL if you post a little more info on you're system we may be able to help you further

Read other 9 answers
RELEVANCY SCORE 76.4

How can I change my default resolution on my monitor so it doesn't everyday

Read other answers
RELEVANCY SCORE 76.4

Until recently, I was always able to adjust my monitor's screen resolution. Now whenever I try to adjust it to 2048 by 1536 pixels (the most resolution), I get an error message that says:

OUT OF FREQUENCY

HF: 95.4 kHz
VF: 60.0 Hz

OPERATING FREQUENCY

HF: 30-70 kHz
VF: 50-160 Hz

What does all this mean? Why can't I do something simple like set my screen resolution?

Help would be appreciated... thanks.
 

A:Adjusting screen resolution

That's a pretty high resolution. Sometimes resolutions are listed that a monitor doesn't support. Where you able to set it there before?
 

Read other 3 answers
RELEVANCY SCORE 75.6

AOC 2353 monitor, on windows 7 has a recommended resolution of 1920 by 1080

when it is set here I notice even the desktop boots up quick and efficient. opposed to when it is set at 1600 by 900. which is best on the eyes.

problem with 1920 by 1080 is that the folders and print are far too minute to see.

this is with Intel onboard video, from the processor.

is there a way to expand the text and folders? browsers can be zoomed

would having a video card help?
 

A:adjusting screen resolution - AOC monitor

If you go into the advanced display settings, you can increase the size of items and fonts and can "bold" the text.
I've got bad eyes, so I do this every time I set up one of my computers after I install the Windows operating system.

The native resolution for my 27" monitors is 1920 X 1080.
This is an example of what my desktop looks like after changing the display settings.
As you can see, the icons and text are noticeably larger and bolder than they would be from using the default settings.
(click image to enlarge and view it)

--------------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 75.6

Hey guys,
I've been looking for a program to adjust my screen resolution. I'm connecting my computer to a TV, unfortunately either my graphics card or the TV suck. I used to have a program with which I was able to set my custom screen resolution. Does anyone know of such a program?

Thanks in advance!

A:Program for adjusting screen resolution

try this one

http://www.snapfiles.com/get/qres.html

Read other 3 answers
RELEVANCY SCORE 75.6

So I bought a new netbook for work travel recently and loaded a program that I need to use. Program runs fine and all, however the prescribed screen resolution for the program is 1024x768 and the netbook (with Windows 7 HE and an Intel GMA 3150) doesn't seem to want to go past 1024x600. Does anyone perhaps have a thought or a way to get 7 to display more here? I don't mind if I even just need to scroll around to get to all the material, but right now its just cutting off part of the program making it impossible to work on some of it.

A:Adjusting Netbook Screen Resolution

Hi Orion3,

While your 1024x768 program is a standard 4:3 aspect ratio, 1024x600 is a widescreen aspect ratio (16:9) as many netbooks have. I'm pretty sure that if 600 is the maximum pixel height it can display but you still need to match the 4:3 aspect ratio program, then you'll have to go down to 800x600 rather than up. Try that and let me know how it works.

Cheers,

Walker
Windows Outreach Team

Read other 5 answers
RELEVANCY SCORE 61.2

i have laptop hp 15-ay191nia with 620 HD card & radeon r7 m440, i need to adjust the screen resolution to 1280x1024 but only the resolutions allowed is 1366x768 max. how can i do it please???also how can i adjust it to 1920x1080 please?

A:resolution adjusting proplem in 15-ay191nia

Hi, The screen of your machine supports 1366 x 768 max as shown:     39.6 cm (15.6") diagonal HD SVA BrightView WLED-backlit (1366 x 768)    Source: http://support.hp.com/au-en/document/c05363483 Number of dots is the number of dots, you can't pump it over its suppoted resolution. Regards.  

Read other 2 answers
RELEVANCY SCORE 59.2

Hi! something's really wrong with my Display Settings. In adjusting the Resolution, you can only adjust to 600x800 to 1024x768 pixels. I'm getting pissed trying everything. I think the default monitor should be turned off..
 

A:Please help me with adjusting the resolution for Windows Vista Basic Acer laptop

Please HELP ME
 

Read other 3 answers
RELEVANCY SCORE 52

I have had my laptop for nearly half a year now and I just recently found an HDMI cable in an old junk box that can be connected from my widescreen Samsung DLP to my Laptop. The problem is that when I set my TV to be the main display the task bar does not fit on screen and I can barely see it. Another problem is when I play my games or watch videos they also appear to be bigger then what my screen is. I cant even see the exit or minus button when I make my windows/browsers in full screen. I have tried changing the screen resolution, but that doesn't work either. I then thought it might be my TV but it does not give my the option to change its aspect ratio.

I there solution to my little problem? Like a download or a program that is naturally in the computer that can adjust the aspect ratio (not resolution) manually for extended displays? And the resolution is on its recommended settings by the way.

A:I need help with adjusting my screen.

What is the graphics card on your laptop? Both AMD and nVidia cards have overscan options in their software which should give you the capability to adjust your display size manually until it fits. Also check that you're outputting the correct resolution for your TV.

Read other 3 answers
RELEVANCY SCORE 51.2

I have a HP laptop. Its screen it very bright. I want to dim the screen brightness. The keyboard keys doesnt help much it and i cant figure anything in settings section. Kindly help me with it.

A:Adjusting screen brightness

Hello Saniahasni Please tell us the full model number of your laptop and the operating system used. HP Notebook PCs - How Do I Find My Model Number

Read other 1 answers
RELEVANCY SCORE 51.2

well when my laptop is plugged in it shows maxiumum brightness, but when its not plugged in it become brighter, yet brightness setting shows in the middle, for not plugged in, how can i get the plugged in brightness to equal unplugged brightness, and I have tried changing power settings.

A:Screen Brightness adjusting help

First of all, please specify maker and model of your laptop. Some vendors could have their own third party replacements for some functions.

Also, please go to Control Panel - Power Options - on the right side of your current active power plan select "Change plan settings" - in the next window click "Change ADVANCED power settings" - then navigate to - Display - Display brightness and check percentage.

Read other 5 answers
RELEVANCY SCORE 51.2

I installed 8 on my wife's laptop, she plays several games through FB, She has to lower the screen size to 75% to play Words w Friends. There is no place to do this when FB has been pinned to the Start. Any suggestions.

Read other answers
RELEVANCY SCORE 50.8

After coming out of sleep one day my laptop's screen resolution was changed from its native 1280x800 to 1024x768, and it is impossible for me to change it back. I have tried to change it via display settings, powerstrip, ati catalyst control center, editing registry files, updating the bios, updating the drivers, scanning for viruses, and updating windows - all have failed. I was just wondering how to revert my resolution back to 1280X800.

The guts:
HP TouchSmart tx2 Notebook PC
4.00 GB RAM
Windows Vista? Home Premium (6.0, Build 6002) Service Pack 2
ATI Radeon HD 3200 Graphics
DirectX 10
AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-85 (2 CPUs), ~2.3GHz

Thanks in advance for any and all help.

A:Screen Resolution Problem

Actually, the work-around is to Turn off the screen saver or set it to the "Blank" screen screen saver. This way the resolution will not be changed during the screen saver run and Vista will not get confused when the computer wakes up.

It is the issue with Vista

Read other 5 answers
RELEVANCY SCORE 50.8

hi
am working on windows 8 only from 2 day
the screen resolution of my computer is only show two setting
1024 * 768
1280 * 1024
and the two setting are not good for my screen 22"
how can I add more resolution
my VGA is build in ,motherboard is Intel DG31PR

Read other answers
RELEVANCY SCORE 50.8

Hey all,

I have recently been running my computer for really long periods and have only just turned it off last night.

When I turned it on this morning it did a file corrupt scan which sometimes randomly happens. When windows fully loaded the screen resolution had been changed, almost to safe mode resolution.

So i\I have tried changing the resolution (Normal is 1920x1080), with no luck. Even though it says it is on 1920x1080 (recommmended), I know for a fact that it's not actually that resolution.

You can tell by this photo that the desktop is way to large for 1920x1080. Unfortunetly I do not have a photo of my original desktop resolution


I have installed the latest NVIDIA graphics driver, and it is the right driver for my card. Also checked all windows updates

So basicly has anyone had this problem and does anyone know of any fixes?

Specs:
Graphics Card - GTX 460
Monitor - BenQ G2420HD

Thanks guys!

A:[PROBLEM] Screen resolution not right!

Tried uninstaling graphics drivers and reinstalling? (Possible corrupt Driver File)

Try a diffrent Driver Version? (Might be a bug in driver version your using)

Does you monitor need drivers? (Sometimes installing monitor Drivers help things)

Try These then post back!

Read other 7 answers
RELEVANCY SCORE 50.8

Yesterday I installed a driver for my new mouse, then restarted my laptop. After that my resolution is stuck at 1600x1200. When I right click my desktop and click resolution, it says it's at 1920x1080! but it's definitely not.

It also shows a message in the resolution window "If your resolution is below 1600x1200, some items may not fit on the screen".

I tried uninstalling the mouse driver (im not sure if thats the cause of the problem..), I tried rolling back my display driver, then updating it back to normal. I also rebooted my laptop many times.

What should I do? Should I maybe completely uninstall my display driver? If so, how do I re install it? I appreciate any help I could get!!!

Im running Windows 7 64bit, and I have Nvidia Geforce GTX 260M...

Also, ever since this problem started yesterday, when I start a game, I cant move my cursor for some reason, with my mouse or my touchpad.

A:Screen resolution problem

Hi and welcome to TSF please post the make and model of your computer or if a custom build the make and model of the motherboard

Read other 9 answers
RELEVANCY SCORE 50.8

Problem Description:
I AM RUNNING WINDOWS XP PRO WITH A MOTHERBOARD
MAKE ASROCK P4VM890
WITH ONBOARD GRAPHICS ADAPTER VIA / S3G UNICHROME PRO IGP.
THE PC COMES UP WITH A RESOULTION OF 800 x 600 FOR MY MONITOR AND AS COMES UP AS "PLUG AND PLAY" TYPE

WHEN I CHANGE RESOLUTION (TO HIGHER) I HAVE TO SCROLL LEFT OR RIGHT, OR UP
AND DOWN TO VIEW ANYTHING ON MY SCREEN.
ITS LIKE THE DESKTOP IS BIG AND THE MONTIOR IS ONLY SEEING A SECTION OF IT
ANT ANY GIVEN TIME.

MY MONITOR IS A 16:9 FORMAT 22INCH LCD
MADE BY SANYO.

My graphics card supports lots of different resolutions.
COULD YOU HELP ME I HAVE TRIED DIFFERENT THINGS FOR THE PAST 2 MONTHS WITH NO LUCK
 

A:Screen Resolution problem

Read other 8 answers
RELEVANCY SCORE 50.8

Hey guys,
I had just recently formatted my computer (had to get rid of Vista) and installed XP MCE. I am using a 32" HDTV as my monitor, and changed the resolution on my computer to a wide screen resolution using Media Center. All seemed to be working well, until i closed my Media center. Now all that shows up is "no input" after windows loads. Any help in fixing this problem would be greatly appruciated.

Thanks in advance

A:Screen Resolution Problem

Hi, can you boot into safe mode? Press f8 on boot up and once in reset your video settings.

Read other 7 answers
RELEVANCY SCORE 50.8

Hello, After formatting my laptop I have got some problems with drivers, what driver should I install to fix the problem will the screen resolution, I also cannot see when making volume higher or lower on the screen ,

A:Screen resolution problem

Hi: You need this driver for the graphics...Install and restart the PC. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp48280.exe You need this software for the brightness and audio on screen display... This package provides the HP On-Screen Display Utility for the supported notebook models and operating systems. The HP On-Screen Display Utility enables the pop-up graphic displays that are shown on the screen when certain characteristics, such as volume or brightness, are changed. File name: sp55152.exe    

Read other 1 answers
RELEVANCY SCORE 50.8

System Specs:
Dell XPS M1710 -

80gb HDD
Intel Core Duo T2600 (2.16 GHz)
2 gb RAM
NVIDIA GeForce Go 7900 GTX 512 MB graphics card
WUXGA Truelife Glossy screen

I recently reformatted my harddrive with gparted. Created a primary partition (nfts) and installed vista home premium 32 bit on it. On the remaining unallocated space I installed Ubuntu 8.10. Before I did this my display in vista was beautiful, 1920x1200 resolution. Ever since I reinstalled vista and reinstalled my nvidia driver it lists the current resolution as 1920x1200, but I can definitely tell that it is not the same resolution as before. I'm very frustrated because my monitor/graphics card is definitely not running at 1920x1200 resolution, but it says that it is under my display settings.

Any ideas why this is happening?

A:Screen Resolution problem

Originally Posted by ubunturocks


System Specs:
Dell XPS M1710 -

80gb HDD
Intel Core Duo T2600 (2.16 GHz)
2 gb RAM
NVIDIA GeForce Go 7900 GTX 512 MB graphics card
WUXGA Truelife Glossy screen

I recently reformatted my harddrive with gparted. Created a primary partition (nfts) and installed vista home premium 32 bit on it. On the remaining unallocated space I installed Ubuntu 8.10. Before I did this my display in vista was beautiful, 1920x1200 resolution. Ever since I reinstalled vista and reinstalled my nvidia driver it lists the current resolution as 1920x1200, but I can definitely tell that it is not the same resolution as before. I'm very frustrated because my monitor/graphics card is definitely not running at 1920x1200 resolution, but it says that it is under my display settings.

Any ideas why this is happening?



can you post a screenshot of your desktop and resolution settings? including refresh rate? example below

Read other 14 answers
RELEVANCY SCORE 50.8

I have Windows 7 Ultimate RC 32 bit that I'm using in dual-boot mode with Windows XP Professional SP2. I am using an old ViewSonic monitor and I don't have the drivers. Windows XP is apparently using a generic driver which lets me set any screen resolution I like and I usually use 1024x768. Windows 7 has a generic driver which will only allow 800x600. Does anyone know if the Windows XP video driver will work in Windows 7 and, if so, the best way to copy and install it?

A:Problem with screen resolution

Its not the monitor - You need to install Windows 7 Drivers for your Graphics Hardware.

A monitor by default uses a Generic PNP Monitor or Generic Non PNP Monitor Driver, either one should not affect what resolution you can run it at. What graphics adaptor do you have? I'd be happy to help you find drivers for it..

Read other 4 answers
RELEVANCY SCORE 50.8

So im currently running Windows 7 64 bit with a Nvidia 9500 graphics card. I installed an update for my graphics card and it failed. It changed the resolution, and when i tried to change it back it turned the screen black and didnt revert. Now whenever i
start my computer, even when in safe mode and when I tried plugging my screen into the media accelerator attached to the mobo, my screen says
D-sub
Out of Range
74.9kHz/60Hz
 
How can i get my screen res back to normal?

A:Screen Resolution Problem

Hi,
I suggest performing System Restore first.
http://windows.microsoft.com/en-IN/windows7/products/features/system-restore
If it still does not work, try reinstalling the graphics card as below:
1. Click the Start button and type DEVMGMT.MSC and press Enter.
2. Find out your graphics card, right click on it and choose Uninstall.
3. Also check the uninstall driver software box if it is available.
After that, restart the computer and install driver from the manufacturer's website.Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Read other 3 answers
RELEVANCY SCORE 50.8

Hello all,

I have a bit of a screen resolution problem. It just seems to be a bit sretched, and I only have two options to switch my resoltion to, neither of them helping.

My graphis card is a ATI Xpress 1150 256MB HyperMemory (Integrated graphics). I'm not sure how to fix it, I've tried seeing about updating the drive, but that doesn't seem to work.

Thanks ahead of time

A:bit of a screen resolution problem

Buy a new card, that's about all you can do (in my knowledge) to gain more resolution options. Your card, being integrated, isn't the best and doesn't have that much option.

Beyond that, what's the native resolution of your monitor? And what size is it? Is it a laptop?

Read other 9 answers
RELEVANCY SCORE 50.8

Unknowingly, I had reduced my screen resolution and, of course, all the icons etc were huge. I found a post here about changing the resolution back to 1024 X 768 and successfully did this via Control Panel, Display, Settings and pressed the "Apply" button and then the "OK" button and everything returned to normal. However, whenever I switch off and restart the computer again it reverts back to the lower screen resolution and I have to reset it again. How can I rectify this so that the screen resolutions settings are saved?
 

A:Screen Resolution problem

You likely have a failure of your video graphics driver, or your screen hardware is failing.
First, download a new driver. Once you have it handy and can find it again, remove or disable the old driver. Next, install the newly downloaded driver.
You could also have other hardware errors such as memory or hard drive not properly working.
 

Read other 3 answers
RELEVANCY SCORE 50.8

Help...

I was playing a game in windowed mode and after exiting the game I noticed my screen resolution was lower than what it usually is. I tried changing the resolution back to 1280 x 800 only to find that it was already set at 1280 x 800 and yet my screen is still showing a clearly larger resolution than this.

My computer is a HP dv5 - 1138TX

Apparently my screen should be able to higher resolution than 1280x800. New problem. I am not able to select a higher resolution than 1280 x 800

A:Problem with Screen resolution

I have the same problem. I usually put my computer on Hibernate, or Standby. Well, this time I shut it down. When I turned it back on, the resolution went to a different one. I went to personalize and display settings, raised the bar looking for 1440x900 and didn't find it. It was the highest setting at one point cause it was my native resolution. Now it's gone.
I tried "back-up and restore center" from Start>All programs>Accessories>System Tools>System Restore
Restored the system. Nothing changed and I went to furthest restore point I possibly could.
Then, I tried to update my drivers through ATI.(some people have Nvidia or something...)
That didn't work out. They said to first download it, uninstall the current driver then install the new one, then reboot.
All it did was add a resolution but didn't add the one I needed.
Then I read somewhere to just unplug my monitor for ten seconds, plug it back in and it in and what do you know. It fixed it.
Then, since I restarted from the restart point, I had to re install the Windows Updates and guess what happened the resolution sucked again.
Now I'm too lazy to restart my computer and unplug it and all that good stuff.
So give all that a try. good luck.

What I meant on that last part about "restarted from the restart point..." was "Restore point". Also, I was working with a laptop today and i have one of those '2 port KVM switches' and decided to use my 17" Gateway monitor as an extend... Read more

Read other 1 answers
RELEVANCY SCORE 50.8

Hi all,

I just turned on my computer about an hour ago and immediately I noticed there was something different about my screen resolutions. Everything appeared bigger and "pixelated." The black edges appear normal, but everything else within this frame was larger. When I change the resolution settings it isn't the default setting I've always had (although sometimes it gets close) and the black edges get messed up. When I first started up my computer, the settings were at 800 x 600, and I changed them to 1024 x 768, but the black edges are still messed up and aren't how they should be. Does anybody have any solutions? I've tried just about everything I can think of.
 

A:Problem with my screen resolution.

Read other 6 answers
RELEVANCY SCORE 50.8

Help, please!
I recently had to reinstall Windows XP and a new hard drive. And now I'm having resolution problems. The best I can get is 1280 x 800. Before the crash, I was running at 1280 x 1024. If I increase it to 1280 x 1024, the display is larger than the screen, and scrolls if I move the mouse to the edge of the screen.
My settings say I'm running [multiple monitors] on ATI Radeon XPRESS 200M. I'm only running one monitor, and there's no other option in the settings. I seem to recall running into this problem with a previous computer, but I can't remember how to solve it.
Any help would be appreciated.
Thanks,
Scott
 

A:Screen Resolution Problem

did u install your graphic drivers .........these are for xp
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=uk&dlc=en&product=453183&lang=en
 

Read other 2 answers
RELEVANCY SCORE 50.8

A friends screen does not extend to the left and right edges of his monitor. he changed the screen resolution 8 times, not all at once. It quit changing. the screen is slightly off to one side of the monitor. There is a black space on both sides of the monitor.

It is a CRT monitor, XP, 256 MB of memory and 2.53 Ghz Pentium 4.

Advice?

Thanks in advance.

A:Screen resolution problem

umm....has your friend tried adjusting the monitor settings yet?

Read other 4 answers
RELEVANCY SCORE 50.8

Hi allYesterday I fitted a (used) graphics card in place of the onboard version I used to have. The old one is listed up as an hp [email protected] Intel® 82865G Graphics Controller. The new(?) one (that I took out of a computer I was given) is an NVIDIA GeForce4 MX 4000 (Microsoft Corporation). It was running fine on the other computer and, funnily enough, it was set at 1024x768. But when I try to set it to 1024x768 resolution on my current computer the screen goes black and then there are flashes of interference lines and then, after about 5 seconds, the screen comes back to normal showing the resolution it was set at before I changed it.Does anyone have any idea on what may be causing this and can it be fixed? Any help would be much appreciated.Thanks in advance.

A:Problem with Screen Resolution

This should be the proper drivers/download for that card;

http://www.nvidia.com/object/winxp_2k_93.71_2.html

Has this been installed, and you're still having problems?

Read other 2 answers
RELEVANCY SCORE 50.8

Hey guys/girls.. As you'll notice by my elite post count, I'm a brand newby.

I'm fairly experienced PC user, however, I just formatted my system after an uncontrollable virus got into my System32 dir.. At least thats what some free antivirus program said

Anyhow, I formatted, and re-installed all programs as I usually would, reconfigured my PC just as I had it prior format, and installed Norton Antivirus Pro 2003, however, I just tried changing my screen resolution from the standard (800x600px) to a more bearable (1024x768px) and each time I attempt this, the machine instantly resets.

I've checked my Graphics card, and thats firmly plugged in to the motherboard, and the VGA lead to the card is firmly plugged in and screwed in. This is the first time I've ever had this problem, so it's really bugging me to a) get it resolved and b) to find out the problem


Thanks.
tr3nt.

A:Screen Resolution Problem

Try re-install you grafic card driver or get the latest driver for your card. make sure you install using manufacturer instructions. Also you monitor might need a driver. Check with manufacturer.

Read other 3 answers
RELEVANCY SCORE 50.8

Hi,

This may be simple, but I've not come across it before.

My next door neighbours PC has started to default to 640x480. When I attempt to put it back to 800x600 or 1024x768, it says it must restart, but when it does, the resolution stays set at 640 x 480.

Any ideas?
 

A:Screen resolution problem

Read other 10 answers
RELEVANCY SCORE 50.8

Hi, yesterday i intalled Windows 7 x64 and a can't set my screen resolution upper 1024*768 with my nvidia driver. If i don't install the driver and i desable the Microsoft's video cart driver i can go upper 1024*768.

My graphics cart is GForce 7800 GT.

Any one have a idea ?
PS : Sorry for my english !!

A:Screen Resolution problem

Run driver sweeper after uninstalling the driver and install the newest one.

Read other 1 answers
RELEVANCY SCORE 50.8

hello. i have Windows XP home edition. my computer has been running at 1024 by 764 resolution since we obtained the computer many years ago. My little brother was messing around on the computer and now ther resolution is messed up. when the resolution is at 1024 by 764, the entire display seems to go "up" passed the limits of the screen, but reappears cascaded beneath the taskbar. also, the taskbar is raised up. when i try putting the computer at 800 by 600 resolution the taskbar goes back to the bottom of the screen and the display no longer extends above the top of the screen. However, many of my links are cut off at the top. I want my computer resolution to go back to 1024 by 764 and work properly, but i cant figure it out. my thinking was if i could find a way to move the entire display vertically down, much like adjusting the display on a tv, then it will solve the problem. However, i dont kno how to change the problem. much help would be appreciated, but please, dont use big words on me. im not a computer genius. only a 16-year-old boy who is addicted to his computer.

A:xp screen resolution problem

Quote:





Originally Posted by Andrew038


hello. i have Windows XP home edition. my computer has been running at 1024 by 764 resolution since we obtained the computer many years ago. My little brother was messing around on the computer and now ther resolution is messed up. when the resolution is at 1024 by 764, the entire display seems to go "up" passed the limits of the screen, but reappears cascaded beneath the taskbar. also, the taskbar is raised up. when i try putting the computer at 800 by 600 resolution the taskbar goes back to the bottom of the screen and the display no longer extends above the top of the screen. However, many of my links are cut off at the top. I want my computer resolution to go back to 1024 by 764 and work properly, but i cant figure it out. my thinking was if i could find a way to move the entire display vertically down, much like adjusting the display on a tv, then it will solve the problem. However, i dont kno how to change the problem. much help would be appreciated, but please, dont use big words on me. im not a computer genius. only a 16-year-old boy who is addicted to his computer.




Try setting the resolution you want and if your Monitor has an auto adjustment function use that :)...

Read other 3 answers
RELEVANCY SCORE 50.8

We have a computer running Windows 7 with a Gateway LP1925 widescreen monitor. But the only screen resolutions available are 4:3. No driver is available at Gateway. Any ideas on how I can force a 16:9 resolution? I think the monitor's max. res. is 1600x900.

A:problem with screen resolution

welcome,
If you are running an intel graphics chipset, and you download the latest driver, there is a feature that allows you to set a custom resolution. I wouldn't suggest forcing a resolution though. If the resolution is hidden, it is because it cannot display correctly.

Read other 1 answers
RELEVANCY SCORE 50.8

Now i'm running Win 7 x64 Ultimate.
My normal resolution is 1440x900 i powered up my comp last night and i noticed straight away that it wasn't.
It was set to 1024x768.
I'm using an Nvidia Geforce 9500GT GPU.
Straight away i uninstalled the driver as there was no option for 1440x900 and installed an older driver.
Everything was fine.
This morning i get the little yellow exclamation mark on my Nvidia icon in taskbar indicating an update, so i updated and stuff and everything was ok.
I powered down my machine and went and did some things, came back, powered up rig and same damn problem.
A friend thinks it might be something to do with my BCD file.
Any suggestions please?

A:Screen resolution problem

Right! It's just jumped back to 1440x900 on it's own while i was seeing what watching media looked like through VLC Player.
So i'm thinking there's a glitch somewhere.

Read other 6 answers
RELEVANCY SCORE 50.8

hello i have the same problem as Nentin. My screen resolution appear to has a problem.The problem happened once ( before 2 days) when i turned on my laptop and after a while ( 10 mins) it was ok,it fixed by it's shelf,but it happened again last night and until now it's still like that, even if i tuned off my laptop for 10 hours..Have you got any ideas what's the problem and what do i need to do???thanks a lot

P.S. I am using Windows 7 and my graphic card version is 8.672.1.2000.

A:Screen Resolution Problem

  
Quote: Originally Posted by eirini


hello i have the same problem as Nentin. My screen resolution appear to has a problem.The problem happened once ( before 2 days) when i turned on my laptop and after a while ( 10 mins) it was ok,it fixed by it's shelf,but it happened again last night and until now it's still like that, even if i tuned off my laptop for 10 hours..Have you got any ideas what's the problem and what do i need to do???thanks a lot

P.S. I am using Windows 7 and my graphic card version is 8.672.1.2000.


There are a lot of things you can try and they may not help;

1. Remove the battery for approximately 20 minutes.
2. Try cleaning out any dust accumulation.
3. Try repositioning the top portion with the display (move it down an inch)
4. Be sure it is not overheating.
5. Take it to a local repair shop for a diagnostic.
6. Contact the manufacturer.

HTH

Read other 2 answers
RELEVANCY SCORE 50.8

This game I want to run requires my desktop resolution to be set to 32bit. But when I go to the visual settings under "properties", I can only go up to 24bit resolution. Is this a problem with my monitor or with my video card? What can I do to change it?

For your information, I am running an HP Pavilion (yuck, i know) with Windows ME (yuck) and a factory-made graphics card (yuck), some weird card called "Intel Graphics Controller 199" or something.
Thanks in advance to anyone who can help me!
 

A:screen resolution problem

It means you most likely have to update your graphics drivers...if you tell us exactly what model HP Pavilion you ahve, or what model graphics card, then we can help you more.

Oh, and what game are you trying to play?
 

Read other 3 answers
RELEVANCY SCORE 50.8

Anytime I log on to Yahoo Msgr 9 my screen resolution automatically goes to 800x600. I have to manually reset it. My PC specs are: Win XP SP2, 2GB RAM, ATI video card with the latest drivers, 19 inch LCD monitor. This error only occurs with yahoo msgr. I tried reinstalling the software but that did not work.
 

Read other answers
RELEVANCY SCORE 50.8

Right now my screen resolution is set to 1024x768. I don't know if thats the reason but on most web pages I have to scroll over to view the whole page. I thought it was the website but than I realized on my friends computer it shows the whole page without having to scroll all the way over. Is there a way to make it differant so I don't have to scroll all the way over? I have windows xp pro. Please help!

A:screen resolution problem

well you could try changing the resilution to higher

Read other 2 answers
RELEVANCY SCORE 50.8

hey guys ty for te help i turned on my pc this morning and my resolution was at 800x600 when it is normally at 1600x1024.
So i turned it back to 1600x1024 and there where these horizontal lines going across the screen so basically was wondering if u could help me get rid of the lines i have an ATI 4850 with the catalyst drivers which i updated today thinking it would help but it didint plz help

Read other answers
RELEVANCY SCORE 50.8

Hi! I'm running Vista Ultimate 64-bit. I have a 24" LG Flatron L246WP-BN HD widescreen monitor and an integrated Radeon HD 3300 GPU on my ASUS M3A78-T mobo. After buying the monitor I realized it wouldn't work properly with my old system so I built a completely new one. (Check out my full system specs.) The monitor's native resolution is 1920 x 1200.

The problem I'm having is that I can't set the resolution higher than 1280 x 720. If I do I lose almost one-half of my screen (everything shifts to the left so I can't even see my Start button, etc.).

Am I doing something wrong? What good is it having a widescreen 24" 1920 x 1200 HD monitor if I lose half the screen by setting it to it's native resolution?

Thanks for any help you can provide!

A:Problem with screen resolution

I have the identical problem after playing a game. My laptop is acer aspire 5920 vista home premium 15.4" graphic media accelerator 3100 2gb ddr2 CORE 2 DUO Processor 5750. My screen resolution has changed to 800x 600 while minimum requirement is 1280x 800.
I would appreciate if someone can guide how to restore the resolution.

Read other 5 answers
RELEVANCY SCORE 50.8

Hi,

I have been using Windows 7 since the past 2 months and it was a breeze.Yesterday my brother messed up something and formatted the windows so I had to do a re-install.
Now the problem is that I am not able to acheive the desired resolution as before, everything is showing quite stretched (as in wide than normal proportions).What I am looking for is a reslution of 1280 x 880 or 1440 x 990, but I am not able to coz there are no options though earlier it was working fine.

Quick reply would be appreciated.

Many thanks,

Monti

A:Screen resolution problem

  
Quote: Originally Posted by montiahuja


Hi,

I have been using Windows 7 since the past 2 months and it was a breeze.Yesterday my brother messed up something and formatted the windows so I had to do a re-install.
Now the problem is that I am not able to acheive the desired resolution as before, everything is showing quite stretched (as in wide than normal proportions).What I am looking for is a reslution of 1280 x 880 or 1440 x 990, but I am not able to coz there are no options though earlier it was working fine.

Quick reply would be appreciated.

Many thanks,

Monti



Monti

Probably video driver. type device manager in search. goto the display tab. Is you card listed? and working? are there any unknown drivers with have yellow triangles on them
Let us know
Ken J+

Read other 9 answers
RELEVANCY SCORE 50.8

Hi

I have just had to do a clean install of Windows 7 after a disastrous couple of weeks using Windows 8.

My problem now is that I have used the recommended screen resolution, but no matter what I do, square images just are not square, they are elongated.

Can anyone help me get my square images back?

Many thanks.

A:Problem with screen resolution

Try and find the Video card drivers you used before for windows 7, or download the newest ones of what ever website you will need the graphics card drivers so if you are with AMD or Nvidia.


World Leader in Visual Computing Technologies | NVIDIA UK
Global Provider of Innovative Graphics, Processors and Media Solutions | AMD

Regards,
Andrew

Read other 9 answers
RELEVANCY SCORE 50.8

Hello,

I was wondering why i have only one device for my screen resolution called Generic PnP Monitor on Standard VGA Graphics Adapter.And can't get it back to normal.

Here's a pic.

A:Screen resolution problem.

Well, the system apparently could not automatically find the right driver for your monitor. Go to the manufacturer's website (of the monitor) and see whether they have something more appropriate.

Read other 2 answers
RELEVANCY SCORE 50.8

Hello!

I've just installed Windows 7 Ultimate 32-bit. My graphics card is geforce 8800gts 320mb and my screen is hyundai imagequest L72D. My screen does support 1280x1024 but 7 gives only the options of 800x600 and 1024x768. I've installed the latest nvidia drivers for that card also. 7 shows my screen as PD421 analog. Dunno why. I'd like to get that 1280x1024 resolution to use because I don't like this 1024x768. I used Windows XP before and in XP I can use that resolution.

Please someone help.

A:Screen resolution problem

  
Quote: Originally Posted by pasuli


Hello!

I've just installed Windows 7 Ultimate 32-bit. My graphics card is geforce 8800gts 320mb and my screen is hyundai imagequest L72D. My screen does support 1280x1024 but 7 gives only the options of 800x600 and 1024x768. I've installed the latest nvidia drivers for that card also. 7 shows my screen as PD421 analog. Dunno why. I'd like to get that 1280x1024 resolution to use because I don't like this 1024x768. I used Windows XP before and in XP I can use that resolution.

Please someone help.


Have you re-run the windows experience index (WEI)?

Read other 9 answers