Over 1 million tech questions and answers.

M91p doesn't wake from sleep after 1709 upgrade

Q: M91p doesn't wake from sleep after 1709 upgrade

Hi,after installing the Windows 10 fall creators update 2017 (1709), my M91p doesn't wake up from sleep any more. Before the upgrade it worked fine. Now I have to shut it down the hard way and restart - then it will continue at the point where I left off. Any ideas on that?Best regards,Sebastian

RELEVANCY SCORE 200
Preferred Solution: M91p doesn't wake from sleep after 1709 upgrade

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: M91p doesn't wake from sleep after 1709 upgrade

Addendum: installed the latest BIOS and drivers provided by Lenovo.

Read other 1 answers
RELEVANCY SCORE 83.2

I have multiple Inspiron 7569 systems that do not work correctly after install the 1709 update. When waking from sleep, the display just shows random black & white lines. I also have multiple Inspiron 7353 systems that exhibit the exact same behavior with the 1709 update installed. Dell lists both models as tested for this update.
In 100% of cases:

Rebooting and using F12 to run diagnostics shows no hardware problems
Using Dell Update to check for updates says the machines are up-to-date
Rolling Windows back to 1703 immediately fixes the problem

Given the number of machines and complete consistency in behavior it seems overwhelmingly likely there's a software or driver compatibility problem here. Is the list of compatible models simply wrong? Are the software updates needed to fix this problem distributed through some channel other than the normal Dell Update? Something else?

Read other answers
RELEVANCY SCORE 76.4

Hello,I've M91p, i5 2400 - Win 10 64 bit.3GB RAM.BIOS Version - 9HKT43AUS. After I shutdown the computer, the power led doesn't turn off (like in the picture below))? And after that I can't turn on my PC until I make hard shutdown (press the power button for 7 sec).thats happen every time I shutdown my PC.What can I do about it?And I read about the problem of freezing - twice a week I have that issue too.I know that's because of unsupported CPU with Win 10. There is something to do about it?a CPU upgrade will help? Or BIOS update? (-If I'll need to update my BIOS - is there some guide in this website to help me do that?) THANKS!!!!

Read other answers
RELEVANCY SCORE 72

Hello,         I have been using this new machine for last 2 months and am experiencing this issue from time to time. When I don't work on the laptop, I just close the lid. After some time, I see that the red led light on the lid goes blinking on slow pace - that tells me the machine has gone into sleep mode. Now, when I come back to the machine later, usually I see either the red led is still blinking or completely gone off. I open the lid, the machine wakes up and I can start working on.       However, at times, when I come back, I see that the red led on the lid is constantly on. In those occasions, when I open the lid, the machine doesn't "wake up". I see that the greed led on the power button is constantly on - so that kind of indicates that the machine IS probably awake. But, the screen is black/empty as if its still sleeping. In these situations, I normally end up with force restarting the machine - making me to reopen all the  applications once again, if not loosing some work/data.        Is there anywya I can tweak any setting or follow any best practice - that can prevent this issue from re-ocurring?         Thank you very much in advance for your suggestions.

Read other answers
RELEVANCY SCORE 72

Running a self built system that was working nicely for over a year,now when I put it in sleep mode it won't wake up without pushing the power button and then sometimes I have to switch the power off on the back of the system and let it sit for a minute before it will restart. Running Windows 7 Ultimate
 

A:Sleep doesn't wake up like it used to

Did you install SP1? Have you checked for driver updates for chipset and video? What else is supposed to wake the computer? Mouse? Keyboard? Check Power Management settings for those devices in Device Manager.
 

Read other 2 answers
RELEVANCY SCORE 72

Hi      I bought a new p51 last week and am experiencing this issue from time to time. When I don't work on the laptop, I just close the lid. After some time, I see that the red led light on the lid goes blinking on slow pace - that tells me the machine has gone into sleep mode. Now, when I come back to the machine later, usually I see either the red led is still blinking or completely gone off.  I open the lid, the machine wakes up and I cannot work, I see black screen.    Problem exists on Windows 10 and Fedora 27, so this problem is related with BIOS. One more thing, this problem is not present on battery only when laptop is connected to AC adapter. BIOS: 1.20

Read other answers
RELEVANCY SCORE 71.2

Ok First of, I have Hp pavilion, Windows vista Ultimate, the problem that i have is at random times my monitor goes to sleep mode and never does wake up, I get frustrated over this because I have to end up pressing and holding the power button down which is unsafe for my computer. Please help!! Thank you

A:Monitor goes to sleep and doesn't wake up

Usually if the monitor goes to sleep in means that there is not a video signal.  However, if holding the power button down on the monitor? will wake it then the issue is the monitor.  If you are holding down the power button on the PC then you have another issue.  Which power button are you holding down? What model PC and operating system are you using?

Read other 9 answers
RELEVANCY SCORE 71.2

A Dell Dimension E521 is set to go to sleep after a while, but when I try to use it the only way to wake-up the PC is to press and hold the POWER switch on the front to reboot.

Any ideas? I know that others had this problem. The PC is running Vista 32-bit.
 

A:PC doesn't wake-up from SLEEP MODE

Read other 6 answers
RELEVANCY SCORE 71.2

----------------Thinkpad T480BIOS ver. 1.17Windows 10 ProAll drivers and Windows are up to date.---------------- The problem is very strange because evry thing works fine if the laptop is on battery. But when the laptop is connected to power supply thre is no way to wake it up (whitouth to disconect the power supply). Are there people with the same problem or with solution for it?

A:T480 doesn't wake up from sleep

Hi,I have exact the same problem on my brand new T480 (one week old).First I thougt this is a problem with Suse Linux Tumbleweed, but under Windows 10 Home the problem is also present.I also updated everything to the newest versions and use BIOS ver. 1.17 -> nothing changed. Has anybody a idea to fix this? 

Read other 1 answers
RELEVANCY SCORE 71.2

I've enabled AHCI within Vista properly and it works fine but it's just not restoring from an S3 sleep anymore, whereas it was before in IDE mode.

Are there any solutions about to this?

I'm running 32-bit vista home premium SP1 on a Gigabyte 965P-DS3 (rev 3.3)
 

A:Vista doesn't wake from S3 sleep

No ideas?
 

Read other 1 answers
RELEVANCY SCORE 71.2

Hi, I've recently been running into a problem -- I put my computer into sleep mode, and then when I press the power button to wake the computer, either the screen stays black and I have to do a forced reboot (holding down the power button), or it simply does a forced reboot automatically. This doesn't happen all the time, but I'd say probably 60% of the time that I want to wake my computer from sleep...and I haven't noticed a certain pattern of when it does and doesn't work. It has only been happening the last month or so, and has happened more often recently. I got a new battery for my laptop about a month ago, so that may have corresponded to when this problem started, I can't 100% remember.

I have an HP Compaq 8710w laptop with Windows 7 Professional (32-bit). I have updated all the drivers already (literally went through every device in Device Manager and tried finding updates for each), and the issue is still happening. What's the next step I should take? Thanks in advance!

A:Computer often doesn't wake from sleep

Is this your system?

Software & Driver Downloads HP Compaq 8710w Mobile Workstation - HP Customer Care (United States - English)

I only see Windows 2000 as a supported OS.

Read other 19 answers
RELEVANCY SCORE 71.2

----------------Thinkpad T480BIOS ver. 1.17Windows 10 ProAll drivers and Windows are up to date.---------------- The problem is very strange because evry thing works fine if the laptop is on battery. But when the laptop is connected to power supply thre is no way to wake it up (whitouth to disconect the power supply). Are there is other peaople with the same problem or with solution for it?

Read other answers
RELEVANCY SCORE 71.2

Hi, I'm having problems when my laptop goes to sleep, I'm not sure what happens but when my battery is low, it goes to sleep but doesn't wake up even if I plug the charger in. The only way I can get this fix is to restart it by shutting it down through the power button.
 

A:My laptop goes to sleep and doesn't wake up

Read other 7 answers
RELEVANCY SCORE 71.2

I've been having this problem for awhille -- approximately 30-50% of the time, when I put my computer in sleep mode and try waking it up, it simply doesn't wake up. I hear it turn on (fan starts running, etc.) but the screen is black (forced to hold down power button to reboot)...or it goes to the startup screen (but won't finish starting up -- have to hold down power button to reboot).

I have an HP Compaq 8710w laptop with Windows 7 Professional (32-bit).

Here is what I have done already to try to fix it:

-Updated drivers
-Tried turning off wireless before putting to sleep
-Changed power plan from "High Performance" to "Balanced".

No dice. Any other ideas?

A:Computer often doesn't wake from sleep

You can try to go to A computer that is running Windows 7 or Windows Server 2008 R2 stops responding when you put the computer in sleep mode (S3) or resume the computer from the S3 mode and download hotfix to your computer.

Read other 4 answers
RELEVANCY SCORE 70.4

Hello,

It has recently started that while i am playing games like Mass Effect 2 and League of Legends after 15 or so minutes of playing the screen goes black, displays that it is going to sleep, and then stops responding. To fix this i have to restart my computer completely.I am running windows seven. I have run malware and virus scans of my computer and nothing has come up, so i'm not sure where to go from here.
Thanks.
 

Read other answers
RELEVANCY SCORE 70.4

Hi all,

When I click the sleep button my computer seems to go into sleep mode successfully however when I hit a keyboard key or wiggle the mouse to wake it the tower fans & motherboard lights switch on but there is no picture or sound from my monitor. I have to hit the reset button which does a dirty reboot before I can get back to the desktop.

I'm fed up of having to do a full shutdown/restart of my computer everytime I go away to do something!

Please find my computer details here: removed due to sensitive info.

If you need any other information, please ask.

Thanks in advance,




Joe

A:Sleep Mode Doesn't Wake Up Properly...

Hi please do 2 things first remove the dropbox link (I will do that)as you have posted sensitive info ie serial number you can repost with that removed,the other is check your power settings

Read other 2 answers
RELEVANCY SCORE 70.4

When bringing the W541 out of sleep while docked, the internal monitor and external monitor do not turn on. I believe the PC itself wakes from sleep, but I can't see anything. I have to do a hard reboot. I have the latest display driver as recommended by the Lenovo update utility. I downloaded the latest firmware for the docking station (UltraDock), but when running the executable it does nothing. No window presents itself. Any ideas? 

A:W541 Doesn't Wake From Sleep While Docked

I should note it's related to this thread I posted last year. When running the firmware update exe for the dock, it's crashing and creating a dmp file.  https://forums.lenovo.com/t5/forums/v3_1/forumtopicpage/board-id/Special_Interest_Utilities/highligh...

Read other 1 answers
RELEVANCY SCORE 70.4

Hi, I recently purchased a Thinkpad X1 Yoga, shipped on May 16, 2016.  I have an issue:     When I use the left side USB port (the one on the side of the power charging port) to charge my old Ipod and the laptop goes to sleep. The laptop does not wake up when opening the lid or pressing on the power button. However, as soon as I disconnect my Ipod from the USB port. The laptop immediately wakes up but unable to login using the fingerprint reader. Specific steps to reproduce: 1) Plug x1 yoga power cord to the laptop 2) Plug Ipod to the left side USB port. Make sure Ipod has no earphones plugged in. 3) Put the laptop in sleep mode 4) Close the lid of the laptop 5) Wait until iPod is no longer being charged by the laptop (a few seconds after the laptop goes to sleep) 6) Wait until iPod automically turns off on its own (it takes 15 to 30 mins, not sure exactly how much time.) 7) Open the laptop lid and notice that the laptop is not waking up. 8) Press on the "power" button on the right side of the X1 Yoga. Notice that the laptop does not wake up. 9) Remove the iPod from the USB port on the left side of the X1 Yoga.        Notice that the laptop is now able to wake up.        Also notice that the finger print reader is not responding. Cannot login using the fingerprint reader. Seems like a driver issue. Lenovo please confirm! ThanksWilly

Read other answers
RELEVANCY SCORE 70.4

My Yoga 500 ISK would sometimes not wake up from sleep.I mean, I can see the computer is working, I can hear it, but the screen is black and unresponsive. What happens is that I either leave it on and it goes to sleep on its own within 15 mins, or put it to sleep via start>power>sleep - it doesn't matter. Sometimes I press the power button and it wakes up fine, but sometime I get the black screen. My computer is up to date on the latest BIOS update (from today), Both Intel and nVidia graphics drivers are up to date, and in my power settings, my hard drive is set to not turn off ever. Does anyone know a solution to this problem??

A:Yoga 500 ISK Doesn't wake up from sleep properly -...

Hi there, I own the same model and I believe I have the same issue. Also I find booting up to be painfully slow. It gives me so much Apple Mac envy. I am almost certain the issue is with regard to the HDD itself, the WDC WD10S21X-24R1BT0-SSHD-8GB. It is used in many of the new-ish lenovo laptops including the Y50 touchscreen gaming computer. Many customers have complained about the SSHD, google that long model and you'll see loads of complaints on forums. I intend to open up my Yoga 500 ISK and replace the SSHD with what should be in there - an SSD. I shall let you know how I get on! Harry

Read other 5 answers
RELEVANCY SCORE 70.4

Came across my first major problem. When I try to go into sleep mode (either through the Start menu or pressing the power button), the hard drive light blinks for a second then the screen goes black. BUT... my power light stays on (should be blinking) and pressing it again, the mouse button... nor any key press on the keyboard will wake it up. I had to hard shutdown (holding the power key down for like 5 seconds) for the light go off and had to keep rebooting from scratch.

That's a major pain since waking up out of sleep mode is normally much faster and convenient. To make things worse.... it seems like 10 takes longer to boot up from scratch than 8.1 did. I've yet to see if SHUTDOWN works properly or not. Not a happy camper on the sleep mode issue. It worked under 8.1 just fine. Anybody else?!?

EDIT: Shutdown goes through a longer process, but ends the same as sleep does...... The power light stays on.

I'm using an HP Envy w/ i7-4510u CPU / 8GB RAM / 4GB Nvidia GTX 850M / 1TB drive

EDIT#2: Now SLEEP and SHUTDOWN appear to be working properly and Windows 10's boot up times are as fast or faster than 8.1 now. It's like a car and trying to clear out the lines of bad fuel before it runs right. Just some weird hiccups.

EDIT#3.... Now it's doing it again!

A:Sleep Mode doesn't work right nor does it wake up.

Identical issues here. Also an HP Envy. Also sleep/hibernate works sometimes and not others.

This will be a deal breaker for me if I can't turn off my computer and turn it back on with my status still intact. I'll (gulp) be forced to return to 8.1

Will post here if I figure out a solution

Read other 9 answers
RELEVANCY SCORE 70.4

Hello, I'm the owner of an EliteBook 8560p running under Windows 7 Professional 64 bits Edition. I started the installation from scratch with a driver-empty Windows. I've downloaded the drivers separately on the HP Support Website. Everything is running fine but when I put my computer to sleep (normal stand-by mode) I am unable to wake it up from the keyboard keys or trackpad buttons. The only way I can wake it up is by pressing the Power Button. Then it wakes up normally and I go back to the Windows 7 login screen. Is it possible to wake up this computer by pressing a key instead of the power button ? I don't want to press it too often.For example on my old Acer Aspire 5315, pressing a key wakes up the computer instantly.Also, I have no "Allow this device to wake up computer" option in my Device Manager.I can't find this option in the BIOS neither.Can you wake your HP Notebook computer by pressing the keyboard ? Is there a way to do that on EliteBooks ? Thanks and sorry for my mistakes, English is not my mother language.

A:Keyboard doesn't wake up computer from sleep

If you have an external display, it will stop the computer from waking. Disconnect display port cable and try again.Also, check your drivers so that Power Mgmt. allows mouse or keyboard to wake system. I have found these issues effect my HP 8460P as well as HP 2540P. Also, make sure that the BIOS allows USB to wake system.

Read other 1 answers
RELEVANCY SCORE 69.6

I have a External Seagate 2 Tb hard drive that after a while, will disconnect and I can't wake it by trying to access the drive in Explorer. I tried rebooting my computer but it doesn't show up anymore. The only solution it seems is to disconnect the drive and plug it back in.

Any advices?

I am on Windows 10
 

Read other answers
RELEVANCY SCORE 69.6

Hello,I have a lenovo y700 on Windows 10 and when I put my laptop to sleep, I am able to turn it back on. But sometimes the screen stays black and the keyboard lights are on. Such that the computer did start up but the screen doesn't want to.The only way I am able to fix this is buy putting the computer to sleep multiple times and then wake it up back again and after once or twice it starts to work. The solution (fool-proof) is to hold the power button to shut it down and then start it up again.I bought this laptop a week ago and (yes) I updated all my drivers(including NVIDA GPU) and windows updates. I also don't have that many background apps running.Here are my specs:Lenovo Ideapad Y700-15 Laptop - 80NV005FUS Processor - 6th Generation Intel Core i7-6700HQ (2.60GHz 1600MHz 6MB)Operating System - Windows 10 Home 64Memory - 16.0GB PC4-17000 DDR4 2133 MHzGraphics Card - NVIDIA GeForce GTX 960M 4GBHard Drive - 1TB 5400 RPM+128GB SSDThanks for your time, cheersBouga











Solved!
Go to Solution.

A:Lenovo y700 screen doesn't wake up from sleep

Hi bouga ,
 
 
Welcome to the Community Forums. 
 
Checking on the support site for   Notebook IP Y700-15ISK I7 , seems no BIOS update needed for this model. 
Typically even on Win Vista and Windows 7 that issue with sleep has been related to hybrid features. 
 
Method 1 : You may try to disable it using the cmd elevated for the command  powercfg -h off . 
Check on this video link for the guide steps 
 
Method 2 : Setting Power option to High Performance instead of conservation mode . then manualy setting sleep on the start icon 
 
Continue to apply neccessary updates that may correct this issue but for the time being , you can use Method 2 as alternate solution if method 1 fail to correct it. 
 
Hope this helps. 
 
 
Regards

Read other 9 answers
RELEVANCY SCORE 69.6

Hi! I have a brand new X1 Carbon Gen3 i7 running on Windows 10 64 bit, the issue is that when it goes into deep sleep mode I am not able to wake up the unit by any mean, neither by pressing a key nor by pressing the power button. I am forced to reboot the unit by holding the power button.  I saw some similar issue in a T440 thread, but no solution was foundhttps://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T440-Doesn-t-Wake-from-Deep-Sleep/td-p/1... Your help is highly apreciated! Cheers Enzo 

Read other answers
RELEVANCY SCORE 69.6

Hi,

On a 8 month old machine if I let machine go into hibernate/ sleep mode with power settings it will not wake up .

I can get it going again by removing and replacing the battery .

I have done a restore to a few days ago when this problem did not exist ..same result

Any offers ? Thanks

A:After hibernate/ sleep mode Tecra M11 doesn't wake up

Hello

Can you please tell us at first which notebook model do you have and which operating system do you use?

Read other 5 answers
RELEVANCY SCORE 69.6

Hello. I have a laser jet printer that is connected to my router through ethernet. My computer detects it but it is always on sleep mode. I called the costumer service and also my internet provider and they were unable to help. It needs a firmware update, but it also doesn't let me do the update.
 

Read other answers
RELEVANCY SCORE 69.6

Upgraded to Windows 10 from Windows 8.When laptop lid is closed, after about an hour or more the power light is steady on.Laptop will not wake from Sleep Mode.  Keypad, or any other key does not wake this up.Hard shutdown/reboot via holding power key does force a reboot and system works after that.Have put this manually into Sleep Mode and power light blinks and wakes up on keyboard select.  Long term sleep causes problem to recur when manually placed into sleep mode I have updated all drivers including the MEI driver.I have checked power options and all are correct re Sleep Mode.Hibernate Mode is not selected for any Power Profile. I see some reference to installing a backlevel MEI driver version 9.xxxxxxx.  I don't understand how to do that or if that is compatible with my laptop.  I have downloaded in from the Intel website, but have not unzipped it.  Also have seen suggestions to turn off the MEI driver. Any guidance on how to proceed next would be appreciated.  If install of the driver is required, what specifically must I do to accomplish that?  

Read other answers
RELEVANCY SCORE 69.6

Hello, I would like to ask a question about my desktop here. After upgrading to Windows 8.1, I noticed that there has been a problem with my display. It doesn't happen everytime, but randomly, when the computer is idle for 10 minutes and the screen is automatically turned off, it won't turn back on anymore. Normally, I will just move the mouse and the display will turn back on again. However, when the problem happens, no matter what I do, moving the mouse, typing in the keyboard, it won't turn back on. I even tried to press the shutdown button, thinking that the computer is just sleeping and it will wake up again, however it doesn't do anything. The only thing that works is the restart button... I've tried every way to try and stop the problem: uninstalling the graphic drivers and reinstall the latest beta drivers, uninstall the drivers again and install the WHQL drivers, installing monitor drivers, checking out the power options and making sure that the computer isn't set to sleep after a timeout period... Nothing works, the problem will still randomly happen again after the desktop turns off the display monitor. My graphic card is Sapphire Radeon R9 270.. does anyone have any solution to this problem of mine? Help is greatly appreciated, I'm very tired of this happening suddenly, I do not want to lose my data from restarting the computer...

Read other answers
RELEVANCY SCORE 69.6

I have been using this laptop (510s) for few months now. I paid over a thousand dollar for this laptop and the laptop doesnt even wake up from sleep. i can hear the fan working and the keyboard light turns on but the screen stays dark. this is not acceptable. i have to fully turn my laptop off in order to turn on the screen back on again. this problem doesnt occur everytime, but still happens every now and then. 

Read other answers
RELEVANCY SCORE 69.6

Hello,

I have a lenovo y700 on Windows 10 and when I put my laptop to sleep, I am able to turn it back on. But sometimes the screen stays black and the keyboard lights are on. Such that the computer did start up but the screen doesn't want to.

The only way I am able to fix this is buy putting the computer to sleep multiple times and then wake it up back again and after once or twice it starts to work. The solution (fool-proof) is to hold the power button to shut it down and then start it up again.

I bought this laptop a week ago and (yes) I updated all my drivers(including NVIDA GPU) and windows updates. I also don't have that many background apps running.

Here are my specs:
Lenovo Ideapad Y700-15 Laptop - 80NV005FUS

Processor - 6th Generation Intel Core i7-6700HQ (2.60GHz 1600MHz 6MB)
Operating System - Windows 10 Home 64
Memory - 16.0GB PC4-17000 DDR4 2133 MHz
Graphics Card - NVIDIA GeForce GTX 960M 4GB
Hard Drive - 1TB 5400 RPM+128GB SSD

Thanks for your time, cheers

Bouga
 

Read other answers
RELEVANCY SCORE 69.6

Hey everyone,

I've got a self-built PC that has been running great since 2010 without issue. However, I recently found that the sleep function no longer performs as expected. The computer sleeps on command but wakes just 3-4 seconds later. Worse, the system is totally unresponsive after waking, with no video to the monitor. I own a backlit USB keyboard (Corsair K90) and the keys weirdly flicker when I try to type in this state. The only way to exit the state is by a hard shutdown. I can't seem to pinpoint the issue since "powercfg lastwake" returns an empty wake history by next boot. I also haven't installed any new hardware since having the problem. I found a troubleshooting guide for sleep issues and followed that, and the only device that is able to wake my computer is the keyboard, according to windows. I'm wondering what to do since I'd love to have my computer always available but leaving it on wastes a ton of power. Thanks for reading my question.


PS. I think this could be related to RAM. Under normal operation (after a fresh boot), the ram status led's are all green, meaning that there are no issues. However, when in the above unresponsive state, I fond that the same status led's are orange, a warning indicator. I am using S3 sleep, so the session is always saved to RAM. Just what I know, hopefully it's a clue to the solution. Thanks again.

A:PC Wakes immediately after Sleep(S3), but doesn't respond after wake

Have you tried system restore?

Read other 9 answers
RELEVANCY SCORE 68.8

Hi,

I have a rather weird problem since installing win 8. When the computer goes to sleep, my normal practice is to hit the esc key to wake it. Worked fine on win 7. Now, when the computer goes to sleep, I hit esc and the computer wakes up but only for about a second or two and then it goes back to sleep. I must wait until it goes to sleep completely (about 5-10 seconds) and after I hit esc again, it wakes up ok.

I have a gateway laptop running intel core i3-2310M.






Acer - Recovery Management Version 5.00.3002.0
Acer Incoperated - Identity Card Version 1.00.3006
Acer Incorporated - Power Management Version 6, 0, 3006,
Acer Incorporated - Updater Version 1.02.3005
Acer Incorporated - Welcome Center Version 1.02.3101.1031

Communications

↓ Broadcom NetLink (TM) Gigabit Ethernet
Status: Cable unplugged
Dhcp Server: none responded
Physical Address: B8:70:F4:8F:4B:A0
↑ Intel(R) Centrino(R) Advanced-N 6205
primary Auto IP Address: 192.168.0.11 / 24
Gateway: 192.168.0.1
Dhcp Server: 192.168.0.1
Physical Address: A0:88:B4:0A:F6:D4
Connection Speed: 144 Mbps
↓ Microsoft Hosted Network Virtual Adapter
Status: Not connected to a network
Dhcp Server: none responded
Physical Address: A2:88:B4:0A:F6:D4
Microsoft ISATAP Adapter
Microsoft Kernel Debug Network Adapter
↓ Microsoft Wi-Fi Direct Virtual Adapter
Status: Not connected to a network
Dhcp Server: none responded... Read more

A:must wake from sleep twice after win 8 upgrade from win 7

Try pressing other keys; clicking; fooling with trackpad. On my laptop, I sometimes have touch the power button briefly. This procedure doesn't make much sense though. If fast startup is enabled, then you might try disabling it: Fast Startup - Turn On or Off in Windows 8.

Read other 5 answers
RELEVANCY SCORE 68.8

Hello, I have an Ideapad 510S13ISK on Windows 10 bought less than a year ago.After installing the Updates for windows (Version 1709) on December my pc started not to wake up from sleep mode, neither closing and opening the screen nor trying to wake it up using the power or any other key.I tried previously to update all drivers from Lenovo's support site.Then i tried to use a restor point created before the Windows Updates, but they still remained installed.At that point i reset the pc using the reset option by windows but the problem was still present.I updated again all drivers after the reset but nothing, it doesn't wake up. Precisely the pc seems to wake up but the screen doesn't, and it "flashes". Here a video of the probem: https://www.youtube.com/watch?v=LntcxCrlZqQ I'm sorry for my english, hope you understand. Kind regards. Marco

Read other answers
RELEVANCY SCORE 68.8

I usually lower the laptop lid when i want to put it into sleep mode; after the windows 10 update, this stopped working. I tried putting it into sleep mode from the start menue. This causes the screen to become black, but power to remain on ( I can see this from a steady light from the power button whereas sleep would have a flashing power button). The laptop's fan also increases in speed. When I try to wake the laptop, nothing happenes; I have tried to use ctrl+alt+delete, however this also does not work. I am ususally forced to resort to a manual shut down via holding the power button for a few second and restarting the laptop. I have tried updating the display adapters, restarted the laptop, and still no result. Does anyone know why this is happenning and how I can fix it?

A:Laptop doesn't wake after sleep mode after Windows 10 update

I was having the Exact Same Issue. The reason I decided to go back to windows 8 was because since upgrading to Windows 10, when my computer goes into sleep mode, I cannot wake it up. I have to press and hold the power button to shut it done and restart. Even if I close my laptop, and reopen the lid, it wont start back up and I have to press and hold the power button and shut it down and restart.  After trying to restore my HP Envy Laptop from Windows 10 to Windows 8, it got stuck in a Repair PC Loop and I could not even access the desktop, I tried the restore option to an earlier date and that failed and all the repair options also failed. The last option I had was to do a full PC Refresh, and that one worked. It took about an hour but no data was lost, and only a few of my downloaded apps were removed. An html url was left on the desktop that showed a list of all the apps that were removed. So all I did was download those back and now im back up and running Windows 8. 

Read other 9 answers
RELEVANCY SCORE 68.8

Hello all,
Hopefully I've posted this in the right place.  I have an Asus G60VX gaming PC. I'm using 64 bit Windows Vista. I had my hard drive replaced a few months ago and am now just using it a lot. Over the past week I seem to have been having this issue but now it's really coming now. It's happened twice yesterday. When I close the lid it goes into sleep mode, then when I open it, the lights on the center part of the outside of the lid (Republic of Gaming logo) come on as do a couple of lights near the power button but the screen remains black and I have to hold down the power button to restart it. I don't like doing this because I was told it fries the motherboard and harddrive. After it reboots Windows Error Recovery comes up and prompts me to go to safe mode or start windows normally. I'm pretty sure my drivers are updated although I'm not 100% sure about BIOS. I've tried enabling/disabling hibernate but according to the command prompt I don't have permission. I'm all out of ideas.  Also, when I took my PC in to get the hard drive upgraded, the guy said there was a bug in some Asus models that cause a black screen whenever you restart them.  Has anyone heard of this or did he mess something up and just told me this?  Thanks.
 
EDIT: Actually according to System Information it's a G60VX.

A:Sometimes my Asus G51V Lalptop doesn't wake up from sleep mode.

Bump
Any ideas?

Read other 2 answers
RELEVANCY SCORE 68

Please help, I just upgrade RAM on my laptop (3GB to 4GB), replace one 1GB with 2GB stick with the same specs but for some reason, windows 7 start getting BSOD after wake up from sleep. I ran the tool but could not find the output folder Windows_NT6_BSOD_jcgriff2 in my documents (also check with search in windows explorer for the whole system) even though it did open cmd screen and ran a lot of diagnosis, auto open my user folder with document folder highlighted. So what I have in the zip file is dump folder and PERFMON_report.html
Operating System
MS Windows 7 Professional 64-bit
CPU
Intel Mobile Core 2 Duo P7350 @ 2.00GHz 50 ?C
Penryn 45nm Technology
RAM
4.0GB Dual-Channel DDR3 @ 531MHz (7-7-7-20)
Motherboard
LENOVO Base Board Product Name (CPU)
Graphics
Generic PnP Monitor @ 1280x800
BB Capture Driver
Mobile Intel(R) 4 Series Express Chipset Family
Hard Drives
313GB Western Digital WDC WD3200BEVT-22ZCT0 (SATA) 39 ?C

A:BSOD after RAM upgrade after wake up from sleep

  
Quote: Originally Posted by cncarrollton


Please help, I just upgrade RAM on my laptop (3GB to 4GB), replace one 1GB with 2GB stick with the same specs but for some reason, windows 7 start getting BSOD after wake up from sleep. I ran the tool but could not find the output folder Windows_NT6_BSOD_jcgriff2 in my documents (also check with search in windows explorer for the whole system) even though it did open cmd screen and ran a lot of diagnosis, auto open my user folder with document folder highlighted. So what I have in the zip file is dump folder and PERFMON_report.html
Operating System
MS Windows 7 Professional 64-bit
CPU
Intel Mobile Core 2 Duo P7350 @ 2.00GHz 50 ?C
Penryn 45nm Technology
RAM
4.0GB Dual-Channel DDR3 @ 531MHz (7-7-7-20)
Motherboard
LENOVO Base Board Product Name (CPU)
Graphics
Generic PnP Monitor @ 1280x800
BB Capture Driver
Mobile Intel(R) 4 Series Express Chipset Family
Hard Drives
313GB Western Digital WDC WD3200BEVT-22ZCT0 (SATA) 39 ?C



Several problems
1-stpd.sys use dby daemon tools and alcohol. Uninstall it

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads

You can use MagicDisc as an alternative.

Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) Overview
2-Old drive... Read more

Read other 2 answers
RELEVANCY SCORE 68

Most of the time when I try to print a document from my laptop (or my wife's - both Dells) I go to the printer room to find that the printer didn't wake up from sleep mode. I have to wake it up and then print everything again.
 

Read other answers
RELEVANCY SCORE 68

I've upgraded my Lenovo T540p to Windows 10 Creators Update and the laptop stopped waking up from sleep mode. All I see is flickering display (once in a few secs). Sometimes it wakes up after a minute or so of such behavior. Though most of the times only reboot helps. I went further and did a clean install of Windows 10 Creators update. The problem persists.  Didn't have such a problem before the latest update. Does anyone have the same issue? Any ideas why it's happening?   

Read other answers
RELEVANCY SCORE 67.6

My PC is fairly new and I'm having problems with slow shutdowns/restarts and slow sleep/wakes. Recently it seems to fail waking altogether and restarts after a while instead. Usually during waking I just have a black screen for a long time before the reset/restart but sometimes I see the Windows log-in screen but it's unresponsive.
The problem predates my CPU undervolting and doesn't seem to change when I switch RAM settings back to Auto instead of XMP (I my RAM necessitates some kind of overclock in order to function at its rated speed).

Can anyone advise how to proceed? Thanks.
System specification below. This forum has a fantastic design that eliminates the form of pasted lists of information. That's just great for preventing people from reading it. I was worried someone might have read this information.
OS: Win 10 Pro 64-bitMainboard: ASUS Z170 Pro GamingCPU: Intel i7 6700 (6th gen), Stock HSF, Undervolt Offset -0.15 V, LLC 4RAM: Corsair LPX Vengeance 2x8GB DDR4-3000 (CMK16GX4M2B3000C15)Graphics: Gigabyte NVIDIA GeForce GTX 950Sys Drive: Samsung Evo 750 SSD, 250 GBData Drives: OCZ Vertex 2 SSD, 60 GB; WDC WD1002FAEX-00Y9A0, ~1 TB; WDC WD2003FZEX-00Z4SA0, ~2 TB; WDC WD2002FAEX-00MJRA0, ~2 TB; RAID 0, ~300 GB [Maxtor 6B160MO x 2]PSU: XFX TS 750W (P1-750S-NLB9)Bluetooth: Parani UD100 Bluetooth USB AdapterMonitor: LG 21.5" W2246S-BF 16:9 Wide LCD Monitor 1920x1080 5msLogitech G500 mouse, K120 keyboard.UEFI BIOS divergence from optimised default settingsAI Overclock Tune... Read more

Read other answers
RELEVANCY SCORE 67.6

Upgraded to Windows 10 in late July- (I should have known better than to upgrade since I had a year to do it). --now laptop won't wake from sleep withoout a hard button shutdown and reboot. Have followed the instructions on HP website about enabling keyboard, allowing to wake from sleep, updating bios and allowing automatic updates for windows and HP. Please help, this is crazy rebooting my laptop everytime I walk away from it for awhile. Product number:G6T85UA#ABABIOS:F.26-01/19/2015Keyboard revision:89.23Total memory:8.00 GBProcessor name:Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz













Solved!

View Solution.

A:Notebook won't wake from Sleep after Windows 10 upgrade

Check out this post and see if it applies/helps: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/How-to-Resolve-Post-Windows-10-Upgrade-Issues-on-HP-Laptops/m-p/5209825/highlight/true#M309942

Read other 10 answers
RELEVANCY SCORE 67.2

This is an issue that I've seen in two other posts, but I can't find a resolution: https://forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/Brand-new-M715Q-will-not-wake-after-sleep/m-... https://forums.lenovo.com/t5/Enterprise-Client-Management/NVMe-Drivers-and-M715q-Tiny-AMD/m-p/370512... I've posted on those threads to see if somone had a resolution on there, but I don't see any posted. We are experiencing the same issue.  Brand new m715q with BIOS ver M11KT31A (3/31/2017).  Windows 7 preinstalled.  Goes to sleep.  When you move the mouse or touch the keyboard the screen stays black and it doesn't wake from sleep.  Tried upgrading all drivers.  No change.  Tried upgrading the firmware.  That was when we discovered the firmware will not upgrade.  Firmware issue.  From the TVSU program it runs through the whole BIOS upgrade process, shutsdown windows, then the screen goes black, the fans rev up, and then stays that way.  Monitor says going to power save mode.  It never continues past that point.  If I go into the BIOS system log it says "BIOS updated"; however, the version has not changed.  We tried upgrading to M11KT32A.  Then recently they just released M11KT33A.  Same thing, doesn't upgrade.  I've tried running the update from system update, from the windows command line with manual reboot, from a bootable USB stick, and a bootable CD image and nothing works. ... Read more

Read other answers
RELEVANCY SCORE 67.2

I am posting to this forum looking for a solution to this ridiculous problem of computer not waking up (monitor-wise) when it goes to sleep.  To recreate the issue I merely walk away from computer for 10 minutes or so, come back, monitor is dark.  If I hit any key the other 2 attached montors awake but the monitor on the W540 does not.  I am sick and tired of having to reboot to get it to wake. What I've done over past two months to fix this: Tried many of the suggestions here including going back to previous "Intel" driversTried the newest Bios update  This is a nagging and (in my opion) absolutley unacceptable problem to have.  It's like stepping back 15 years to the infancy stages of laptops.  I don't get it doesn't Lenovo have a QA department?  Obvisouly not. I hate to lump in mulitple problems and won't but I also want to say the touch pad is absolutely a failure.  These two problems make the W540 more of a burden than a help.  As it is now I would never recommend a Lenovo to anyone.   Wake up Lenovo, how many posts like these do you have to see and not do anything?













Solved!

Go to Solution.

A:W540 Sleep, Hibernate, Won't wake up, new Bios driver doesn't work (3/13/2015)

I've just resolved this by going back to the 21st May 2014 driver:http://www.opendrivers.com/download/driver-167436.html

Read other 9 answers
RELEVANCY SCORE 67.2

W7 PC wakes up from sleep every few minutes. It didn't use to. I am the builder / owner / sole user. Investigation done so far at the DOS prompt to establish the cause:

powercfg -devicequery wake_armed
(no results returned)

powercfg -waketimers
There are no active wake timers in the system

powercfg -lastwakeWake History Count - 1
Wake History [0]
Wake Source Count - 0Other ideas to try and establish the cause with please?

Many thanks.

Read other answers
RELEVANCY SCORE 66

I have a TP T530, 2359-4LU, that has Win 10 installed.  Originally had 4gb of ram. After upgrading to 6gb of ram, system ran fine. Went to seep mode when closing the laptop lid as normal, but when opening the lid, the device would not wake/resume, instead with a black screen the device would shut down.  I have read something about possibly too much voltage needed by the new ram and some devices can alter those settings in the bios, but I can't find that for my system. Any suggestions? Doug

Read other answers
RELEVANCY SCORE 61.6

Hi,

I am new here. Hoping someone can help me out with this issue. I work in IT so am not a complete computer bonehead and am at my wits end with this.

My laptop is about 4 years old, it's a toshiba. For whatever reason, it started taking 5+ minutes to wake up from sleeping. If it sleeps for an hour, it's OK.. but if you leave it sleep all night and try to wake it up in the morning, it's quite cranky. After the 5+ minute wake up, it performs as normal. It was running Windows 7 Home 32 bit.

Troubleshooting steps that I have taken are as follows.

Reinstalled windows. Issue was resolved! but after about 2-3 weeks, issue came back. I thought maybe it was some type of windows update, so I reinstalled windows again and paid closer attention to the updates. Issue presented itself again after 2-3 weeks, and there were no updates immediately done prior to it starting.

I started to think maybe it was something related to my hard drive, so i performed laptop surgery and swapped out my original hard drive with a solid slate drive, and installed windows 7 Ultimate 64 bit (this laptop can support 64 bit so I figured why not upgrade.).

issue again was resolved for a few weeks, and now it's back to taking 5+ minutes to wake up again.

If you're turning the laptop on from scratch, it takes 10-15 seconds tops. if you're restarting, it's 10-15 seconds tops (man, I love SSD...)... if you're waking itup within the hour, its 1-2 seconds. But anything longer then that, 5+ minutes.

It ba... Read more

A:Laptop extremely slow to wake up from sleep mode, 5+ minutes to wake

Hi there, have you ran any malware/anti virus scans?

Read other 9 answers