Over 1 million tech questions and answers.

Do hard drives come with an SATA cable?

Q: Do hard drives come with an SATA cable?

Just bought a HDD on amazon and I was wondering if it comes with an SATA cable. It didnt say it did, nor did it say it didnt include one. If not, where could I buy one? Walmart? Best buy?

Preferred Solution: Do hard drives come with an SATA cable?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Do hard drives come with an SATA cable?

It depends. Often they are oem drives - no screws or leads included.

You might need screws, sata data cable and molex - sata power cable. They are usually very cheap on Amazon, Scan, Aria, etc.

I expect they have them in Best Buy.

Read other 4 answers

I want to transfer data from my hard drive in my laptop (Lenovo Y480) to a hard drive in my desktop. the cables for the sata adapter do not fit the hard drive from the laptop. Is there a different form for a 2.5 hard drive and a 3.5 hard drive?

A:sata to usb adapter cable dosen't fit sata hard drive in laptop?

Does the drive have an adapter need to remove to expose the SATA conenctors? I don;t see anything about the Y480 not having a standard SATA drive and laptop and desktop SATA connectors are the same.

Maybe post pictures of both the drive and your SATA cables.

Read other 2 answers

I currently have 2 PATA hard drives installed in my system that both run off the same IDE ribbon cable. My MSI MS-7184 motherboard has 2 SATA connections and 2 SATA power supplies available. Would I benefit much by upgrading my hardrives to SATA ones? One of them holds the operating system and programs etc (160GB) and the other stores my mp3's (320GB). Would there be much speed gained or not enough for me to notice? Also would data be transferred faster if my PATA drives had one IDE cable each instead of sharing one? I seem to have 2 IDE connections on the motherboard.

A:Solved: SATA Hard Drives vs PATA Hard Drives

Read other 8 answers


I have an ssd and hdd already connected to one sata power cable and was wondering if I can connect a third (ssd)?

I'm sure my psu can handle it!? but I just need some reassurance it can

Thanks in advanced!

A:can you have 3 drives connected to one SATA power cable?

Yes, if the cable has 3 or even 4 sata power connectors on it, you can use them all, the PSU puts out more power when it has to.

Read other 5 answers

I have 2 IDE HDs installed and added SATA drive lately. SATA runs in IDE mode in CMOS. Problem is, even though SATA drive is recognized by BIOS, Disk Manager, Norton Ghost & System Works, it doesn't show in My Computer, causing problems with saving and opening files. Tried a couple of tricks (changing the drive letter,disconnecting & reconnecting the drive, reformatting etc. ) nothing seems to work. I use this SATA drive for storage and for now I have to drag the files down there manually.
I don't know if it's of any importance, but I have nVidia GeForce graphics card onboard.
Has anyone encountered this kind of a problem ?
Thanks Carl

Read other answers

I have two separate instances of Win8 running on two separate IDE hard drives (both Win8's restored from same exact backup image).

The one on the hard drive comected to the SATA port (via an adaptor) runs fine, but the one on the IDE connection (motherboard's only one), does not respond properly when a manual shutdown is initiated. Instead of shutting down the PC, it goes into sleep mode. This does not happen if an application (my backup software, for instance) is set to perform a shutdown after completing it's job. Only affecting manual shutdowns, but all of them.

So I am wondering if Win8 is lacking an IDE driver of some kind, and if there is a way to deternine this.

Seems strange to me that while both hard drives are IDE "underneath the hood", that the one connected throgh an adaptor is more easily being recognized by Win8, and curious if there is an easy fix.

Read other answers

I've got an old Dell Inspiron 8200 PC that the office uses as shared storage, printer server etc, and it's been having issues seeing USB drives correctly (Although the laser printer that's on USB has never ever had a problem!?!)

Yesterday it dawned on me that instead of plugging in the extra 2 drives I need I could put another couple of hard drives in, in place of the optical drives, that are never used on that machine.

So after a bit vague googling it seemed this was possible, so I went ahead and removed both optical drives, replacing them with 2 hard drives, (so now the PC has 4 internal drives).

... and they work! You wouldn't believe the hassle I've had with NetworkAttachedStorage and various different USB drives, while figuring out that this machine doesn't like USB drives!)

The thing is: the drives seem to be running really slowly. Is this because CD drives won't need to receive data as fast as hard drives do? Is there any way of setting it up to send data faster to these drives?

A:Plugging Hard Drives into to Optical Drives' IDE Cable?

Read other 10 answers

I currently have an SSD with the OS on it.

I have a 500GB hard drive about to fail that has all my games and programs.

I have a new 2TB HD and a SATA cable.

My question is what is the best way for me to move all my programs and games over to this new hard drive?



Read other answers

Hello my laptop needs to be an internal cable Hard to look for this model What is the number that exists on cable model Hp Compaq  presario cq58 d56se 

Read other answers

Hi all (first question!)

I've just got a new pc, and I deliberately only got 1 hard drive as I was going to take out the slave drive from my old pc. However, being a noob I didn't realise that the old drive (it says it's an ultra sata drive if that helps) is connected to the mobo using an IDE cable, wheras the new drive is connected using the newer SATA 2 thin red cable.

The question is, can I have a SATA 2 connected hard drive and an IDE connected hard drive on the same mobo? I particularly wanted to put in that specific hard drive as I copied all of the pictures of my son onto that drive.

the mobo in question is an ECS P965T-A: DUAL DDR2, S-ATA, x16 VGA, 3 PCI/3 PCI-EX.

Thanks in advance!

A:IDE and SATA Hard drives

If your motherboard has an IDE connector, sure (although Tedster will try to tell you otherwise).

You may get some booting issues depending on the braindeadedness of your BIOS and the Windows installation. The only way to find out is to try

Read other 3 answers

I have a 80 gb Samsung HDD which has OS on it. I also want to install a SATA II 160 gb WD, but windows xp doesn't recognize the drive.

I have googled the problem, i think there could be a solution but they are so complicated for me. I should also say that I have an old motherboard which doesn't support SATA II.

After some searching on WD's website, I try to use a jumper setting but still there is the problem.
The setting I tried is like that:
[] : : :

: [] : :

Any ideas?

A:IDE and SATA Hard Drives

I've had older boards that didn't see drives that were set for 3Gbps transfer speeds... see if the drive has a jumper to limit the speed to 1.5Gbps. That's what I have to do to get drives to work on my old Asus A8V-series boards.

Does the drive show in the BIOS, but not in Windows? If your SATA controller has a RAID mode, you may have to go into the BIOS and configure it for IDE instead of RAID operation. Either way, you may also need to install drivers for the SATA controller (with some boards, it will be different drivers depending on whether it's set as RAID or IDE).

Read other 1 answers

whats the difference between the two

A:sata ide hard drives

IDE are also called PATA (Parallel ATA) drives. They typically use 40- or 80- pin ribbon cables to connect to the system board.

SATA drives are "Serial ATA" drives, and provide much faster throughput, but use a different interface to connect to the system board (typically a 4-pin wire, non-ribbon cable).

Read other 1 answers

I have a sata 250gb hard drive and a ide 80 gb hard drive. I heard that in sata there is no master or slave. So what do u do with the jumpers on the sata drive, Do you just take them off or what? I want to have a partition on the sata 125 and 125 and have my windows on it. My questions is how do i set sata so that my pc boots from it and the ide is set to slave as a storage drive. Also my bios does not recognize the sata it only shows the ide being as master and nothing as being slave. idk how to set this up.

A:help with sata and ide hard drives

The jumper on the SATA drive is probably to force compatibility mode, i.e., set the drive to 150MB/sec speed vs 300MB/sec speed, as some older controllers won't work with the faster drives. Info on the jumpers should be printed on the label, or in the documentation that comes with the drive.

If your BIOS doesn't see the drive, it may need the drive jumpered for 150MB/sec mode, or it could be the SATA controller has been disabled. You'll need to search through the BIOS to find the settings for the SATA controller. There should also be some way to specify the SATA drive as the first boot drive vs the IDE, but that may not be visible until the BIOS can see the drive.

Jumpers on the IDE drive don't need to be changed. The Master/Slave settings only refer to how the controller refers to the two drives that it controls, not whether SATA or IDE is first boot device.

If you want to install anything earlier than Vista onto the SATA drive, you'll need to provide SATA drivers during the install via a floppy drive, or create your own install CD with the drivers slipstreamed onto the CD. The drivers should be on the Motherboard driver disk, or can be downloaded from the MB/PC manufacturers web site. Note that some motherboards have a BIOS setting that puts the SATA controllers into an IDE compatibility mode, so that Windows setup can recognize the drive without separate drivers.

If you don't have a floppy, this article is a good reference: http://news.sof... Read more

Read other 1 answers

Hello All

What is the difference between the SATA Hard Drive and IDE?. Which one is the best to buy.

-Seagate 750GB Barracuda 7200.10 IDE Ultra/100 - HD-ST3750640A
-Seagate 750GB Barracuda 7200.10 SATA 3Gb/s - HD-ST3750640AS



A:Hard Drives(SATA or IDE? )

SATA is newer, faster, and better.
IDE (also known as PATA or ATA) is older and slower.

It is not recommended you mix the techonologies. It may or may not work depending on the motherboard you have. I have learned this from experience.

Read other 4 answers

Just installed Win 8 but cant for the life in me get it to see the other Hard Drives or DVD Drives. The problem might be that 'Intel(R) C600/X79 series chipset 6-Port SATA AHCI Controller' has a little yellow icon against it. However I cant seem to get rid of it. Any Ideas?

A:OS Won't see other SATA Hard drives

Heh. I had the exact same issue on my first boot into Win8 Pro retail. For some reason, none of my other drives showed up. By SHUTTING DOWN, POWERING OFF, and REBOOTING, they magically appeared. You probably already have this fixed if you were the same as me.
If still there then your driver did not magically install itself and you need to go to your mobo's website for the right driver. If it fails due to Win8, try changing the compatibility mode in properties to Win7.

Read other 1 answers

I currently have a 80gb seagate IDE hard drive. Fair enough, does the job pretty well.
I've been meaning to upgrade for a while and what I've seen around alot lately is SATA hard drives. New PSU, it has one SATA drive connector, my motherboard has two signal ones. The hardware is there just I have a few questions:

1. How easy is it to set up the drivers on XP Professional, I assume it can be done without wiping the system.
2. Can I still use the 80gb one? (It will eb used to boot off, the SATA will be used for storage)
3. How can I find out if my motherboard has SATA I or SATA II?

Also, if soemone could maybe give a step by step guide, that would be ace.


A:Hard drives IDE/SATA

Read other 16 answers

So I got a new hard drive for my new computer that is a SATA drive. My old two are IDE. I was wondering if it would be ok to put my IDE HD's in as slaves and leave my SATA HD in as the master... thoughts?

Also, if this were to work, how would I set up the IDE ones? Windows is on my 40 gig and my 80 gig has all of my games and stuff on it. I need to access both. Would I set both jumpers to slave and then just pick one to be on the end of the ribbon cable?

A:3 Hard Drives? (SATA and IDE)

Read other 16 answers

I just made a mistake and put a locking type SATA cable in my computer and now cannot get it out. The idea is good but the design leaves a lot to be desired. I am afraid of damaging the motherboard by just pulling this thing out of the socket.

I have another identical cable to look at and experiment on and pressing on the metal device on the sides of the head does not do anything that I can see.

Is there a secret to getting these out of the sockets? Once out, I will not be using these again.


A:How to unlock SATA hard drive cable?

Actually, pushing the metal release does depress the two small latches. Try this. Depress the metal release, and put the connector INTO the board first and wiggle it around gently. Then, gently pressing it away from the metal catch, try to remove it.

Read other 1 answers

hi guys,

I have just built a computer with the following spec
intel 2.6 E5300 dual core processor,
gigabyte GA-73PVM-S2 motherboard with graphics and audio,
hanns g 19 inch widescreen monitor via dvi,
sony SATA dvd rw,
western digital 500 gb sata hard drive (WD5000AKS)
4gb corsair ddr2 ram

In Bios my sata hard drive is assigned as IDE and if I assign it as RAID or AHCPI it gives an error and I cant boot to XP. No big issue there. The hard drive is connected via a sata cable and so is the DVDRW. What I want to know is if my hard drive is working as a SATA drive. WHat is the way to check this please ? Just wanna make sure that the pc is at optimal.

Also, my SATA DVDRW only has two connections, as far as I can see, sata and power. My motherboard has a CD in, how do I connect a CD in cable to the DVDRW or is this not necessary because it is connected via a sata cable ?

many thanks

A:sata hard drive and cd in cable for dvdrw

anyone ?

Read other 1 answers

IDE cable 1
master-hardrive 1
slave - hardrive 2
IDE cable 2
master-dvd 1


IDE cable 1
master-hardrive 1
IDE cable 2
master - hardrive 2
slave - dvd 1

do the above configurations make any difference?

A:both hard drives on same IDE cable? or No?

IDE cable 1
master-hardrive 1
slave - hardrive 2
IDE cable 2
master-dvd 1

That is absolutely fine and the best way to go about it.

Regards Howard

Read other 7 answers

i have 2 old hard drive's with some data in them and im trying to retrive it back to my current computer.
one of the drive's works perfectly, but when i connect the second drive it kills the cable totally.
i cant use the cable anymore.. even for the first drive.
it happend for the second time already so i figured out the hard drive is the problem..
any ideas how to fix the problem? what should i do?

Read other answers

I finally loaded my window xp media center on my brand new Seagate 320gb SATA 3.0g/s transfer rate hard drive 7200.10 series and the next day the computer wont turn on at all dead. My thoughts were first the power supply went bad or bad power cable to power supply but after checking all connections and possible options i found out that it was hard drive related. I thought it was my hard drive at first because only when the power cable was connected was when the computer wouldnt power up at all and it would shut off if i tried to connect it while computer was running. The hard drive also smelled like an electrical fire so i thought i fried the mother board on the hard drive or it froze on me. I sent it back in the Seagate warranty and they gave me a factory repaired unit. I used a temporary hard drive (WD 60gb IDE not SATA)for the time being with windows xp proffesional on it and worked completely fine no problems at all. As soon as i got the new hard drive i found out that the new hard drive didnt fix the problem i had before and in fact it got worse. The computer will run but somewhere where the red cable connector meets the hard drive power connector is where it starts smoking and burning up. So im thinking it could be the power cable itself because i was using the same SATA power cable as before but im not totally sure yet? any suggestions

A:SATA hard drive power cable shorting?

You can have a defective connector. As a test, use a molex>sata power adapter to connect the sata drive to a standard molex connector ie the same one you used for the ide drive.

Next have you given the sata connector a VERY close inspection with a bright light?

Read other 2 answers

hello! i recently got blackscreened on my old dell. it would boot up to the log in screen and allow me to pass but would not load from there. from what i read online, this SATA cable would allow me to access my hard drive on another computer to possibly save some files. when i plug it in to the new computer, it recognizes the drive but when I click on it i get "Access is denied." I tried to go to settings-security-allow user permissions to access. When I did that I could see some file names I recognized flash by on the screen but it still wont allow me access. any help is greatly appreciated!!

A:trouble accessing hard drive via SATA cable


Read other 1 answers

New Build-- Jan. 2007

Intel motherboard---BoxDG965WHMKR P965-retail
CPU- Intel E6600
MEM 1Gx2 Corsair Twin2x2048-6400 R
Hard Drives-- WD 74GB sata and WD 250GB sata
OS- Vista Ultimate

Everything seemed to work fine on the new build for a week or so. That is until I installed a promise
ultra 100 tx2 pci controler where I could add another hard drive(ide drive) Well, after that the system
would not even boot until I removed the pci controller card. Also, when it did boot, found no operating
system. I rebooted into bios and my two sata hard drives were missing. I have tried everything I can
but the bios will not recognize the sata hard drives anymore. However, the sata dvd-rw is recognized
and works fine. I have cleared cmos, have updated to new bios again, reinstalled drivers, still no sata hd in bios.
I even installed winxp pro on a (ide hd ,using the only one slot this mb has ) and everything works fine on winxp
but still bios will not recognize neither of my two sata hard drives. When I installed the ultra 100 controller in the
pci slot, did it mixup my controller drivers for the sata or what????????????????????? Have worked on this problem
almost 3 days. Any help would be very much appreshiated............

A:Sata Hard Drives Missing

First, if the BIOS can't find the drives, then your problem has got nothing to do with any software, including operating systems and drivers.

Try your SATA drives one at a time in another computer to make sure that they actually work.

Read other 1 answers

Hi can anyone tell me if you can mix these drives.
I wanted to install my old drive as master which is IDE
and have my new disc as slave which is SATA
My motherboard supports both but I am unsure as to what the result would be.

This is my first build so any suggestions would be most helpful.

A:Solved: Can you mix IDE & SATA Hard drives

Read other 6 answers

I have a HP desktop PC that was factory fitted with a 160GB IDE hard drive. I have now added an internal 750GB SATA hard drive that will be used for data storage, the OS and Programs etc will stay on the IDE hard drive.
However, sometimes when I try to start the PC I get an error telling me that the 'BOOTMGR' cannot be found. I think the PC is trying to start from the SATA hard drive instead of the IDE one.
In the set-up (F2) I have set the PC to start from one of the DVD drives first and then the IDE hard drive but it does not appear to respect this, it always goes to the SATA drive.
How can I configure the PC to boot from DVD and then IDE and completely ignore the SATA hard drive?
The PC is running Vists Home Premium SP1, fully updated.

A:Configure IDE and SATA hard drives

Read other 6 answers

I have one of these motherboards


It seems the SATA HDD and DVD ROM can either work in IDE mode or with SATA mode selected in the BIOS, the HDD can only work in RAID mode.
Is it possible to select SATA mode default and how would I do it through the BIOS ?

A:SATA mode hard drives

Read other 16 answers

I had a Pentium III PC running Windows XP that I had installed a master hard drive which ran the operating system and programs, etc. and a larger slave drive that I have saved all of my data to for years. My PC recently broke down and a friend of mine gave me his Dell Dimension 4700 to use. Currently it has a Sata hard drive installed and connected to the primary ATA channel is a CD-RW and DVD-RW.
I want to use the slave drive out of my old system and I am not sure how to connect it. Does it have to be connected to the primary channel or can I use the secondary? And do I jumper it as the master or the slave since it has that sata drive already running?

A:Can you combine Sata and ATA hard drives?

You can definitely use PATA and SATA together. SATA and PATA drives are independent of each other therefore the jumper settings for Master and Slave are not based off the SATA drive, same as PATA drives connected to another PATA port. Master/Slave jumper settings only apply to drives connected on the very same cable. So if the hard drive is connected by itself on an IDE cable it should be jumpered as Master(or Single or Cable Select). If its connected with another drive on the same cable then you need to jumper one as Master and one as Slave(or both as Cable Select). As to which is Master and which is slave, doesn't really matter in most cases although most people prefer to have the HDD jumpered as Master. Additionally, the boot order in the BIOS will determine which drive will be used to boot the system, so make sure after adding the PATA drive that not only is that PATA/IDE channel enabled in the BIOS but that the boot order still has the SATA drive as the primary hard drive for booting.

Read other 3 answers

Sorry I must not have sent the last post correctly. I am new to this site. So I will try again.
I was getting ready to upgrade to bigger hard drive or drives. Before doing that, I needed to take the old hard drives out to obtain some information off the labels. I did so, and while they where out, I cleaned the Mounting slots a little better than using just air.
Having done that I re-installed them both. When I turned on the power button, the button lit up and the fans were running. But it does not seem that the hard drives are getting any power, as I can't hear or feel any thing. Plus the computer is not booting.
I don't recall unplugging anything other than the two hard drives. But I also notice that I have a short cable bundle with two white plugs with three pins and one empty pin hole. on the other end a black connection with with five connector slots with one middle on blank.
That makes me think that I unplugged the power to the hard drive someplace along the ling. As I have a wire bundle that has two SATA power connectors. that are plugged in. But their are three white female plugs marked P4, P5. and P6 which are not connected to anything in that wire bundle. I don't know at this point if the power comes through that bundle from the power source. Of if I do not have the power plugged into the lope.

I hope that somebody can help me figure this out, and let me know if I burnt out the hard drives and have to start over with my recover disk reloading windo... Read more

A:No Power to SATA hard drives

How would I close this post out. Dumb me had the monitor plugged into an unused VGA port. It only took me two and a half days to figure that out. I wanted to let others know to check and see if they have everything plugged in where it should be. Including the VGA or other monitor cables.

Read other 1 answers

Anybody know cheap prices for sata150 hdds? preferably $30 or under.

Thanks for any help

A:Solved: Sata 150 Hard Drives

Read other 16 answers

I am currently running Ubuntu 11.04 on my HP (DV5 1110em) laptop from an external USB 2 Buffalo ministation hard drive, I have noticed my machine is equipped with an E-SATA port. Would using an e-sata external hard drive be any faster that the usb option ?.


A:USB.E-SATA external hard drives

Let's say the BUS is definitely faster on e-Sata. But if you really notice any improvement depends largely on your Hard drive.

Read other 3 answers

BSOD with SATA hard drives- Viamraid.sys

Hello all- I just built a pc with these specs-
Socket 775 P4 3ghz hyper threading psu
Asrock 775v88 motherboard
dual 1gb memory
1x40gb seagate sata hard drive
1x200gb maxtor sata hard drive
dvd, dvd-r, floppy drives
external usb cable modem
Windows xp installed and updated successfully on the 40gb drive, but if I try to format the 200gb drive, or try run any programs from the 40gb drive, or even sometimes at bootup, i get a bluse screen with the following info-
Stop:0x000000D1 (0x00000030,0x0000007,0x00000000,0xF77909A0)
Viamraid.sys-address F77909A0 base at F7786000, Datestamp 4063e304
When I installed xp, I pressed F6 to install the drivers from the Asrock disk, which gave me the same blue screen, and then downloaded the sata drivers from Via.
I also tried removing each memory stick, and rebooting but still the same thing happened!!
Any help would be greatly appreciated!!

A:BSOD with SATA hard drives

This is almost the exact same sort of issue I am having, was there any resolve ever?

Read other 2 answers

Hi, I'm looking at buying a new SATA hard drive and would like to clarify a few things. First, I know there are SATA-150 and -300 versions. Is a motherboard restricted to just one or the other? If a motherboard can only use one, say 150, would a 300 work and just not run at its max? Also, I think it's the buffer (usually 8MB or 16MB) - which is better and what do they do? I very much appreciate any answers, thanks in advance!

A:Questions about SATA Hard Drives

SATA is fully backwards compatible. All SATA 150 devices will play nicely with SATA 300 devices (at SATA 150 speeds).

The buffer size is totally irrelevant. Look at seek times (less is better), sustained throughput (more is better) and warranty (more is better).

Read other 2 answers

I filled out a pc spec form when I joined, don't know if you guys can see it or not but I have two Sata II Drives;

1 x Western Digital 250GB (drive with Windows XP & all main apps)

1 x Maxtor 500GB (extra storage, games, films, misc)

about 4 months ago or maybe more my Maxtor started to click all the time when I played games and it would freeze the whole game up then a 'whirring' sound would come out of the drive then the computer would 'un-freeze' giving me less than 10 seconds to quit the game before the click happened again then when the game eventually quits and im back at the Desktop the clicking and whirring stops altogether and only happenes rarely when im browsing the internet or something although when I accessed some files on the Hard Drive it would click but not always, anyway so I have unplugged the Maxtor ever since that started to prevent any further damage to it.

So since then My Pc has been running smoothly until a couple of days ago when my Western started having the exactly same clicking problem in exactly the same manner! but not as frequent though I fear that if i do keep using my pc then the frequency will increase and I really don't know what to do about it.

I have been searching though the web and found out that some of the causes of this problem can be:

1. power surges

2. poor power supply (closely related to first cause)

3. poor condition of the cables

4. high magnetic interference from speakers for e.g. thou... Read more

A:Both My Sata II Hard Drives are Clicking, Can anyone help?

Read other 8 answers

I've built 2 computers recentlly for relatives, and have used SATA hard drives instead of IDE. Both computers have back-up drives. Here's what is weird. The drives are visible in the BIOS, AND are visible in Device Manager of XP. However, I cannot see them under My Computer, so that means nothing can be saved into them and in effect they cannot be back-up drives.

How can I get the drives to show up under My Computer?


A:Can't See Back-Up SATA Hard Drives

You need to go into disc management and format and consign drive letters/names to them

Read other 4 answers

Hey I just built a computer and it works all fine nad nice but one thng...I have two sata hard drives but it only registers one and when I try raid it says it doesn't detect it (as in the raid drive...says only unknown drive....and in bios it detects both drives...

A:Solved: Sata Hard Drives

Read other 14 answers

Well, I'm building a computer from scratch with one Serial ATA hard drive. Everything seems to be working great, until I try to install Windows XP. I load up and everything goes well. I get to the Windows XP Install screen, I press F6 to load my drivers. I do so. However my hard drive is still not seen! I'm streched to the end of my rope. I've tried a different SATA cables, both the SATA 1 and the SATA 2 ports on the motherboard, different floppies and the drivers that came with the motherboard CD and the drivers from the floppy.

My motherboard is an ASUS SK8V.

Any suggestions?

A:SATA Hard Drives and Windows

Read other 16 answers

I have just fired up my first computer build. The monitor, keyboard, mouse, 3.5 inch drive, CD reader all work fine. The motherboard is an Aopen AX4SPE Max and the BIOS is a Phoenix Award V6.00PG.

I have installed two Western Digital WD360 Raptor SATA drives, configured as RAID0. The BIOS reports the status of this volume as normal and bootable with a size of 68.9GB. There are no other hard drives in the system.

I have installed Windows XP Pro and it finds only 34.4GB as total size of drive C. With RAID 0 it should see one drive of 68G.

When I formatted the drives, one took several minutes and the second less than a minute. I can't for the life of me, find my way back to the place allowing me to format the drives.

Any suggestions would be greatly appreciated.

A:SATA Hard Drives Problem

see if there is anything on this link to help


Read other 2 answers

I am running two SATA hard drives (not in RAID) and have a spare IDE hard drive sitting around, was thinking of using it but I am unsure if it will affect the speed or anything of the SATA drives?

My computer needs a format so would it be better when I format to install the OS on the IDE or the SATA?

Any advice will be appreciated

A:Mixing SATA with IDE hard drives?

You can easily mix ATA (IDE) and SATA hdd's.

It would be best to have the OS installed on the SATA as it is the faster HDD.

I currently have my OS on an 80GB ATA(IDE) and my storage on a SATA, but that's for my own reasoning. Best to make the most ofthe speed of the SATA drive. Just make sure when installing Windows that you WILL need to have the motherboards sata drivers on a floppy disc.

Read other 3 answers

Hey guys, I have a Gigabyte 870-UD3 motherboard and I also have two hard drives, One is a TB and the other is 500GBs, The TB one is the primary one at the minute and I was wondering does it matter what way my hard drives are connected to the motherboard? Will one slot make it slower or faster??
thank you for the answers and help =)

A:What cable to connect to my Hard drives?

I am assuming the hard drives are SATA hard drives.
There will be no performance difference between different SATA connectors so you can use whichever you like.

Most modern drives will run at Ultra DMA Mode 5 or 6.

Read other 5 answers

Hi, I'm looking for a reliable power cable for a SATA hard drive, which one(s) would you recommend?

A:reliable SATA hard drive power cable recommendation

Read other 16 answers

were would I get a splitter canle for sata hard drive

A:Install second hard drive need a sata data cable splitter???

Hi, You can't split SATA data signals.  SATA power yes, but data no.

Read other 1 answers

I just bought a couple Barracuda drives on eBay and want to install in my desk top LeNovo computer.
There is a couple cables free but only one fits the drive. The other 4-pin ones don't. There must be some sort of adapter for this.
Appreciate some help.

A:Cable(s) for SATA hard drive - Seagate Barracuda, in LeNovo

We would need to know which exact Barracuda drives you bought and your exact motherboard or atleast the model of the Lenovo in order to provide any useful guidance.

Read other 3 answers

Ok heres my story. PSU went out on my computer and took the motherboard with it, comp would not power up even with new PSU.

I got a new motherboard, exact same model as before so my windows xp would work, installed it and it powered up. Everything gets recognized except my hard drives. I have 2 Western Digital SE 160 gb hard drives that had in a RAID. I have them both plugged into master just like it was on the other MB, I have 'set sata as RAID' set in the BIOS, I've checked the connections which seems pretty simple so I am at a loss. Am I missing something? I have never replaced a motherboard before so I am just wondering. Could my old PSU have taken BOTH HDs out along with the old MB? Thanks for any insight you can offer.

Here are my over all specs:
P4 3.6 ghz cpu
2 Western Digital SE 160 gb HDs
Windows XP Home

Read other answers

I have a Targa Ultra AN64 3700+. I had blue screen of death. I had to backup stuff from the drive so i disconnected it and used a USB Universal Drive to back up it to my onto my laptop.

Now the problem i have here is when I try to installed XP or Windows 7 it does not find the hard drives. It displays

Unkown Disk

<There is no disk in this drive.>

Things i have tired:

disable the SATA in the BIOS and still does not detect any of my hard drives.
re-enable it and it still can't find it.
When I go to Standard CMOS Features it can not detect any hard drives.
It detects it then it doesn't detect it. It comes and goes everytime. They don''t have any jumpers on them it came like that. It should be IDE 2 Master and IDE3 Slave.

I know some people are buying USB Floppy disk. I really don't want to buy anything else due to Christmas coming up.

Any ideas to get my PC going?

Read other answers

Hi everyone

I am running WXP SP3 using 2 X 20Gb Hard Drives with Raid 1.

The Motherboard is GA-81945P-G, it has 4 x SATA II connectors.

One of the Hard Drives became faulty. I need to change it.

Hard Drives are becoming obsolete.

Instead of changing for another IDE Drive, I intend to get 2 X 128 SATA II SSds.

Although I know a little about PCs, I do not know enough to install and set up new Drives.

Can you guys give me detailed advice sufficient for a novice to successfully carry out this task ?.

Your help will be very much appreciated.

Many thanks in advance.

A:Change from IDE Hard Drives To SATA SSDs

I hsve 3 Corsair SSDs...I install/use them the same as I would any drive with SATA connections, with the exception that I reserve their use for operating systems/programs installed. I have a ton of other drives I use for data storage, backups, etc and I see no value in using SSDs for storage at this time.

No special requirements that I'm aware of, just newer/better technology.


Read other 1 answers