Over 1 million tech questions and answers.

Sharing a mailbox - Can't see flags

Q: Sharing a mailbox - Can't see flags

2 of us share an In box. For us to make sure we don't both handle the same
email we were using the Flags. In 2003 it was a flag. In 2007 it's a
catagory. One of us is green the other blue.

I upgraded to 2007. The colors still seemed to work but for some reason now
we can't see each others flags/catagories.

Could this have changed with some Microsoft updates? Neither one of us have
changed anything with our Outlook setups.

RELEVANCY SCORE 200
Preferred Solution: Sharing a mailbox - Can't see flags

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Sharing a mailbox - Can't see flags

Anyone out there?

Read other 1 answers
RELEVANCY SCORE 59.6

Hi all

I have two users (on separate, networked PCS running Windows 7) that need to both access one email account, including seeing replies/forwards/sent mail.

An IMAP mailbox would be perfect for this but our company email provider can only provide us with POP3.

Is it possible to set up the mailbox file that outlook uses as a shared file and for both clients to access this?

If not what are my alternatives?

Many thanks
 

A:Outlook 2007 Mailbox Sharing

Hi badasafish, and welcome to TSG.

I am not sure about Outlook 2007, but I do know that previous versions would not support simultaneous sharing of Outlook files between multiple users.

One possible solution is to have all but one installations of Outlook set to not delete messages on the POP3 server when downloading them to the computer. The one special Outlook account would be set to leave the messages on for a number of days long enough for everyone else to receive their copy. You need to be careful about any storage quota limits on the mail server. If the quota limit is reached, no new incoming messages will be accepted until some older ones are cleared out.

This setup will only show sent messages in the Outlook sent folder on the one computer that sent it. As far as I know, there is no way to easily make it appear in everyone's sent folder. The sender could cc themselves and it would show up as an incoming message for everyone.
 

Read other 2 answers
RELEVANCY SCORE 52.8

Hello everyibe,
We have a hydride infrastructure, with E2016 onpremise and O365 (Exchange, teams...). On both sites we have the same users and separate created mailboxes.
We are migrating mailboxes from Ex2016 to O365 in phases to remove E2016.
Users on both sites have the same mailbox name. Example: E2016 [email protected] and O365 mailbox [email protected]
 
Issue:
When we migrate a user's mailbox to O365 and from ExchangeOnline we send an email to a non-migrated user, the email reaches the existing mailbox in O365, not the onpremise mailbox.
 
An alias has been created for non-migrated users in O365, marking themselves as main and we have tried to delete the default email address given by the username. But even if the latter is deleted, the deleted email address always appears, so the email always
reaches O365 and not E2016.

Is there any way that when a user with a migrated O365 mailbox sends an email to a user with a mailbox in E2016 onpremise, the email does not go to the O365 mailbox and to the onpremise mailbox?
 
What would be the solution to keep the default username (for teams solutions, etc) and to be able to modify the email in O365?
 
Thank you

Read other answers
RELEVANCY SCORE 41.2
Q: Flags

Is there any chance you could change the way flags are displayed. For instance it would be nice if you could hover over the flag and it would tell you which country or state you live in?

A:Flags

Good idea, it would save a lot of generally inaccurate guesswork.

Read other 2 answers
RELEVANCY SCORE 40.8

Just curious to know in "about flags" there is an option "override software rendering" - enabling GPU rendering on unsupported system configuration.

Just curious what exactly this does? Doesn't IE9 use GPU rendering on all pages as well by default?

Thanks

A:Chrome About:Flags

IE9 does have Hardware Acceleration set to On by default, yes. But if it detects an older GFX card that doesn't support HA, it will just use software instead.

So that line here - "override software rendering" - enabling GPU rendering on unsupported system configuration. I would assume means it's for using/forcing HA on an unsupported configuration/card.
http://www.sevenforums.com/tutorials...-turn-off.html

Read other 1 answers
RELEVANCY SCORE 40.8

email messages are set to show the yellow flag when unopened. If I open an email below one that has not been opened, the flag on the email above the one I opened turns to grey instead of staying yellow, so it appears as if it was already read, when in fact I have not opened it yet.

Anyone know how to fix this?
 

Read other answers
RELEVANCY SCORE 40.8

after imageing a PC there in device manager is 2 pci items no drivers are found
whats weird is this is an exact image of another machine that is Identical in every way . where could this be coming from? and how to get rid of it.
Gary

A:Pci and other device flags

I can't tell you why, but the easy solution would be to just update the drivers.

Read other 6 answers
RELEVANCY SCORE 40.8

My monitor today started showing what looks to be like American flags. There are red and blue things which flash on and off on the screen. They even display when windows is still be loaded - I think. I tested the monitor on another computer and it works fine. I have checked all cables and everything is plugged in all the way.When going into a game which changes the resolution, more of these 'flags' appear.This first started happening after I opened a song file that I downloaded from Limewire. However, it probably isn't related.Here is a screenshot of whats happening: http://www.mypicstudio.com/out.php/i227_update.JPG

A:Flags On My Screen!

Did you recently move something next to your monitor that has a strong magnetic field (such as speakers)?

Read other 9 answers
RELEVANCY SCORE 40.8

somebody please tell me what these are for they are under most of the avators thanks.Jerry

A:flags under avator

hello jerry, here you go

Reputation And Badge

Read other 5 answers
RELEVANCY SCORE 40.8

Hi, I have had a rash of firewall warnings from the same place with different ip addresses saying there was an invalip tcp flag, exactly what is that? And is there anything that I can do legally? I have emailed them about abuse several times, but it doesn't stop, I sent them everything I found on it, all the ip addresses and timestamps. Now I want to, if possible to sue this company if they are doing something illegal, or trying to.
Thanks
 

A:invalid tcp flags

What is your firewall, and what are the IP addresses? Did you check to see who it was? It might actually be your ISP pinging you to see if the IP address you are using is being used, that is if you have a dial-up. If it's a cable modem then perhaps your being scanned by scanners?

khaz
 

Read other 3 answers
RELEVANCY SCORE 40.8

I'm setting up a fresh installation of Windows on a little notebook for my daughter to use in college It's running XP Pro, SP3. Office 2003. IE8 and Firefox 3. I've been using it a week now, testing and updating it and had just wrapped it up and cloned the drive for safety last night. THEN Amazingly for such a fresh PC, Avira scanning this morning found "C:\WINDOWS\system32\SBUtils\SBWebCtl.dll " . It quarantined and then deleted the file. And now it's blocking access for C:\System Volume Information\_restore{DAAD8284-5896-4B40-A753-8454BDC2E5A5}\RP84\A0008964.dllIt is detecting it as an Undesired Virus or Program- ADSPY/WindowEnhancer.FSo, I installed MWBAM in safemode and renamed it, started it in regular mode, updated, and it found nothing.Ran SAS in reg mode and nothing.I ran ESET Online Scanner as well, and noticed that when the scanner got to that same System Volume Information area, that Avira popped up and blocked the file again. Denied access. Eset says no threats found.Downloaded Dr.Web. It's Quickscan finds nothing. But it also sets off Avira at a certain point for the same file.Perhaps I should add that I do have Nero ImageDrive installed on this system. I forgot to disable it when I scanned. ALSO: I've got SpywareBlaster running on this system as well. http://www.dslreports.com/forum/remark,14507747Googling gives few hits for this file, but one German Avira user ha... Read more

Read other answers
RELEVANCY SCORE 40.8

a friend and i communicate online. occasionally one of us will get infected somehow and then the other person typically does. as if a hacker watches one of us or both of us and just decides to screw around once in awhile.  earlier today in trillian, her text would constantly be selected/deleted without her doing so or it would become bold or italized, even after fully disabling all the keyboard shortcut commands. 
 
further, they seem to be able to disable our scanning programs from producing any results.  example : every single time i run superantispyware or hitmanpro i typically get at the very least, a ton of tracking cookies. however, not anymore.  they don't find anything which to me means they have been remotely modified somehow.  i don't know. even when i uninstall and reinstall them they still don't seem to work.  
 
anyway, i decided to do a scan to see if i got infected too today.  i just ran aswmbr (plan to run more) and it found 2 red flags.  never seen these before on this os install or this comp.  
 
I will attach the log here :  
 
 
aswMBR version 0.9.9.1771 Copyright© 2011 AVAST Software
Run date: 2013-09-14 21:50:52
-----------------------------
21:50:52.984    OS Version: Windows 5.1.2600 Service Pack 3
21:50:52.984    Number of processors: 2 586 0x200
21:50:52.984    ComputerName: COMPUTER-3815  UserName: Owner
21:50:55.781    Initia... Read more

A:two red flags in aswMBR. what to do next?

Hi there,my name is Marius and I will assist you with your malware related problems.Before we move on, please read the following points carefully. First, read my instructions completely. If there is anything that you do not understand kindly ask before proceeding. Perform everything in the correct order. Sometimes one step requires the previous one. If you have any problems while following my instructions, Stop there and tell me the exact nature of your problem. Do not run any other scans without instruction or add/remove software unless I tell you to do so. This would change the output of our tools and could be confusing for me. Post all logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts. If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed. Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean. My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.   Scan with Gmer rootkit scannerPlease download Gmer from here by clicking on the "Download EXE" Button.Double click on the randomly named GMER.exe. If asked to allow gmer.sys driver to load, please consent.If it gives you a warning about rootkit activity and asks if you want to ru... Read more

Read other 31 answers
RELEVANCY SCORE 40.8

My wife's old XP PC gave her fits last night. Security Defender informed her that she had 17 booboos including a keystroke logger and she had bettter hurry and spend $80 on their cleaner or all of her credit card info would be harvested in China. Something like that. Security Defender was was very insistent and not really good with English so I looked her up. Sure enough, some kind of malware / scam.

So I started running AV scans, OneCare scans, and finally, a new highjackthis scan. Then, I pasted the HJT log into a parser and got some red-flagged items. I "fixed" those items, but Security Defender hung in there.

Cut to my new Win 7 PC. I thought hmmm, maybe I should run HJT and parse the log on the new PC as well. I did, and got lots of red-flagged lines, including 23 O23s.

Then, I read something that made me doubt the utility of fixing HJT problems, specifically, somethat said OTL is the new standard for finding and fixing PC malware problems. My impression is that OTL logs are processed somewhat in the same manner as HJT logs: copy and paste to forum (like bleepingcomputer) where somebody would look at the logs and recommend fixes.

Two questions: (1) Is that impression correct? (2) Is bleepingcomputer a forum that looks at OTL logs?

If yes and yes, where should I go to post my two OTL logs?

If no and no, any alternative advice would be greatly appreciated.

PS: Furthermore, I want to eradicate Security Defender from my wife's PC.

A:New Win 7 PC, some hikackthis red flags

See this:Preparation Guide For Use Before Using Malware Removal Tools and Requesting Help

Read other 3 answers
RELEVANCY SCORE 40.4

Check this out, Avast flagged a TSG webpage as an infection, see attachment.
Quite puzzling to me why it would do that.
 

A:Avast overboard: flags TSG

Read other 11 answers
RELEVANCY SCORE 40.4

Hi All,

I am having the issue with the Google Redirect and found that the infections flags.ini & uses32.dat, were the cause. I have run ComboFix and was very much helpful for me to remove them along with other infections.

I have another System where the OS is been installed on the E drive, and I am unable to remove these Trojans, can any one help me?. Can we remove them manullay rather than using any Malware removal tools?

regards

Simpson

A:Infections flags.ini & uses32.dat

As no logs have been posted, I am shifting this topic from the specialized HiJack This forum to the Am I Infected forum.==>PLEASE DO NOT NOW POST LOGS<== unless a log is specifically requested.Please describe the issues you are experiencing with your computer.

Read other 2 answers
RELEVANCY SCORE 40.4

- KB article, http://support.microsoft.com/kb/310593, documents RunOnceEx flags. This article uses flag 0x0000002 in one of its examples, but that is not a supported flag according to the same article???
Please explain and supply me with a complete list of RunOnceEx flags.

Here's the provided example:
RunOnceEx Sample to Run Notepad
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx
Title = "My Setup Title"
Flags = dword:00000002

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx\0001
RunMyApp = "||notepad.exe"
 
 
Here's the article's list of supported RunOnceEx flags:
0x00000000 Default All functions are disabled
0x00000004 Check Shell Status Verifies the shell is ready to accept OLE commands
0x00000008 No Error Dialogs Error dialog boxes are not displayed
0x00000010 Create Error Log File Create C:\Windows\RunOnceEx.err file if errors occur

0x00000020 Create Execution Log File Create a C:\Windows\RunOnceEx.log file with status of commands

0x00000040 No Exception Trapping Does not trap exceptions that occur when registering DLLs

0x00000080 No Status Dialog Status dialog box is not displayed while RunOnceEx runs


I do not see flag value '2'.
 
 

- Also the article suggests to me that I will see the RunOnceEx Status Dialog by default. As desired, I do see the Status Dialog in Windows XP, but not with Windows 7. In Windows 7, I have yet to see the Status Di... Read more

A:Windows 7 RunOnceEx Flags etc.

 is the full list
Value                     Function                    
Function definition
0x00000000          Default                        All functions are disabled
0x00000001           Delete                        Delete registry entries
after     processing them ((normally only RunOnceEx)
0x00000002          Wait                            Causes
items to be run synchronously
0x00000004            Check Shell Status       Verifies that the shell is ready to accept OLE commands
0x00000008          No Error Dialogs       Error dialog boxes are not displayed
0x00000010  &nbs... Read more

Read other 4 answers
RELEVANCY SCORE 40.4

I've recently removed a shedload of virus's from my PC (zeroaccess etc) and now I think it is clean, but after trying LOADS of options I still cannot download anything!
It didn't work when I had no antivirus, it doesn't work now I have Kaspersky Internet security 2014 trial, I used Kaspersky rescue disc to clean up my pc without booting into windows and after many scans it now all shows up clean. beforehand I had Microsoft security essentials which obviously didn't work.....

I have tried reinstating windows defender (was corrupted) by partitioning the hdd with a new install and copying over the windows defender files and deleting the old corrupt ones but now it says it cant run the service, (isn't there). I have tried various options of turning off the smartscreen filter and that does nothing, I'm pulling my hair out now, really stuck on this guys and I really really don't want to do a fresh install again.

I'm running IE10 on Windows 7 Home Premium SP1 64 bit.
Seen problems with AVG but never had it installed and searched for it but that didn't come up with anything.

Any help appreciated, Thanks!
(Cannot download any tools or utilities until tomorrow when I have a laptop to download and transfer files across to the pc)
 

A:Cannot download anything in IE (everything flags up as a virus)

Read other 16 answers
RELEVANCY SCORE 40.4

Bonkers Microsoft Security Essentials flags Google.com as malign






Quote:
A dodgy update to Microsoft's anti-virus software on Tuesday meant users of the software were wrongly warned that Google's homepage was infected with the infamous Blackhole Exploit Kit.


You really couldn't make it up...

A:MSE flags Google.com as malign

Thats great! And it would explain why I had back-to-back updates on both my computers for MSE. I did think it was suspicious

Read other 1 answers
RELEVANCY SCORE 40.4

Hello,
Is somewhere a list of TPM flags, that Bitlocker changes? Or more specifically: does Bitlocker change the TPM readSRKPub flag? I was trying to find it in my computer, but I couldn't find this flag.
Thanks

Read other answers
RELEVANCY SCORE 40.4

Hai friends.When we looked at our startup programs list using a startup manager like Spybot S&D or Browser Hijack Retaliator , i see lot of startup programs uses an additional flag at the end of there file path.I.E. C:\Program file\MSN Messanger\msnmsgr.exe /backgroundWhat is this /background flags tel the perticuler program?like wise there are some other flags too. i am very happy if get a description of each flags.1. /background2. -osboot3 -quit (Yahoo messanger uses this flag)There can some other flags. if there please inclede them in the list.Looking forward to the answers.

A:Windows Xp Startup Flags

well /background would mean that the program operates in the background of the processes. os boot I would assume means the program opens on the operating system bootstrap and quit could be telling yahoo to open a different program when it quits, possibly when you exit out of a chat and it goes to the toolbar or something similar.

Read other 5 answers
RELEVANCY SCORE 40.4

I'm looking for a program that sort of flags a file. For example, I have a .pdf file that I already read, so I want to be able to right click the file and label it in some sort of way, so that I don't read it again. I'm just looking for some easy way to label and distinguish a file from other files within Windows Explorer.

thanks

A:Program that flags files

I don't know of such an app off-hand.

If the PDFs are in the same folder, you may consider creating a new sub-folder called "read" and move the file after reading it.

Read other 1 answers
RELEVANCY SCORE 40.4

Robocopy is failing when it is activated by clicking on my "run_bckup.bat" file.
Although the batch file has Admin-privileges, the following line fails:
  Robocopy "%src%" "%trgt%" .. /B ..  

But starting the DOS-Window (open as Administrator) & running the same file "run_bckup.bat"
succeeds!!  

My Question:
Is there a setting that allows me to activate robocopy by clicking on my batch-file, while using the flag "/B" ?

Here are the Robo reports for the 2 cases above.

==== 1. ROBOCOPY REPORT ON "RUNNING BY CLICKING" on "run_bckup.bat" ====
(this method failed)

ERROR : You do not have the Backup and Restore Files user rights.
*****  You need these to perform Backup copies (/B or /ZB).

Source : c:\Utils - bckup\
Dest   : G:\Utils - bckup\
Files  : *.*
Options : *.* /NFL /S /E /DCOPY:DAT /COPY:DATS /PURGE /B /XO /XA:SHT /R:5 /W:1 

--- END OF REPORT 1 --

==== 2. ROBOCOPY REPORT ON RUNNING by OPEN DOS-Window, and then run "run_bckup.bat" ====
(this method succeeded)

Source : c:\Utils - bckup\
Dest   : G:\Utils - bckup\
Files  : *.*
Exc Files : *NTUSER*
Exc Dirs : *AppData*
    *Templates*
    *Administrator*

  Options : *.* /NFL /S /E /DCOPY:DAT /COPY:DATS /PURGE /B /XO /XA:SHT /R:5 /W:1

           Total    Copied  &nb... Read more

Read other answers
RELEVANCY SCORE 40.4

So, I was trying to do a clean install of Windows XP on my laptop. I completely deleted the old partitions and made new ones. Installed the OS.... but when it's all done, I can't access my wireless internet program. I opened up the Device Manager and this is what I found:

YELLOW FLAGS:
Base System Device
Ethernet Controller
Network Controller
PCI Device
SM Bus Controller
Video Controller (VGA Compatible)

I tried using my driver installation disk I got along with my computer and the OS disk, but it didn't work. Any suggestions????

The OS i have is Windows XP Media Center Version 2005 with Update Rollup... that's what it says on the Reinstallation DVD. But on my computer information it says it is Windows XP Media Center Edition Version 2002 Service Pack 2
 

A:The Yellow Flags of death. HELP!

I have looked at this post frequently hoping someone would have an answer, from what you have said I am assuming you are not online because of your driver problem I hope you know the manufacturer of your network controller drivers because these are the ones you will have to install to get online, most people have there drivers saved to an external device to reinstall after a reformatt. But if you know the name of the manufacturer you can go to the home page and download the drivers even on another computer and save them to a floppy or cd to install on your computer. If you have belarc on your computer this will tell you the manufacturers name.
http://www.belarc.com/free_download.html but if you are not online how can you download it. I hope you know the manufacturers name, what I would do is take it to a computer shop where I think they will have devices to find out all this, or maybe some one more knowledgable than me will post, I will keep my eye on this post. Sorry I could not be any more help but this is a difficult post.
 

Read other 3 answers
RELEVANCY SCORE 40.4

Blue arrows have appeared on my desktop icons and ALL my save pictures. Can someone tell me how to stop them and also how to get rid of the ones that are currently there? I can't figure out where they suddenly came from.

A:blue arrows/flags

Hello Patti, and welcome to Vista Forums.

It sounds like your shortcut arrow overlay icon has been changed to this. The tutorial below can help show you how to restore the default shortcut arrow back.

Shortcut Arrow

Hope this helps,
Shawn

Read other 1 answers
RELEVANCY SCORE 40.4

I have WinXP Media Center edition. I created an automatic backup, set for backing up changed files on a weekly basis. I realized I had screwed it up when I noticed three sets of files and the backup file was growing bigger than the drive I was backing up. I deleted my file and schedule and used the Wizard to create a new schedule etc. After the backup ran, I noticed the only files it backed up were the ones changed from my previous backup.

How do I restore the backup flags on all of my files/folders so that I can start from scratch?

Read other answers
RELEVANCY SCORE 40

I am pretty sure my laptop is infected.
Running XP Professional SP 2
My Symantec system scan consistently identifies c:\WINDOWS\system32\cl.dll. Calls it a Trojan Horse. It fails to clean virus from file or quarantine.

I downloaded ClamWin and ran it but it did not flag this file.

Installed Windows Defender with same result.

The virus behavior is as follows...
When running Internet Explorer after a few minutes additional IE browser is started and system scan software is offered saying my computer is infected. It keeps popping up browsers and I have to quickly close the browsers sometimes using Task Manager to do it.

I also have a intermittent issue where sometimes I return from a being away from my laptop and find a blank MS Paint screen has popped up. Not sure if this is related to above.

If I run Firefox browser I do not have any problems (that I am aware of) or popups

I also downloaded [email protected] and tried their MoveOnBoot option. This product allows define of a specific path and file name and the option to delete, rename or move the file as the OS is rebooting. I tried the Delete option (not sure if this was smart) but it did not work. I am not sure I ran it correctly, as I cannot locate a log file indicating any action was taken or attempted.

I will appreciate any and all help.

connorb01

A:Symantec flags \windows\system32\cl.dll

Hello and welcome.please do two scans.Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself.Press the OK button to close that box and continue.If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install. Alternatively, you can update through MBAM's interface from a clean computer, copy the definitions (rules.ref) located in C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware from that system to a usb stick or CD and then copy it to the infected machine.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at th... Read more

Read other 1 answers
RELEVANCY SCORE 40

Is there any reference site that gives explanations for the experimental settings in "opera://flags/"? I do not understand many of them, and need more information.

A:opera:flags (Experiments) references?

14 Opera Flags Tweaks for Better Browsing Experience - Hongkiat

Read other 6 answers
RELEVANCY SCORE 40

Hi, i am trying to dual boot my windows 10 home laptop with  OS X Yosemite (10.10.1) but i am stuck with the boot flags. This is my BIOS:Legacy boot: enabledUEFI Boot order: USB disk first Legacy Boot order: USB disk firstI've tried this boot flags:-vno boot flag-f-v -f/hp/hp1/hp npci=0x2000/hp npci=0x3000/hp1 npci=0x2000/hp1 npci=0x3000So what am I doing wrong?

Read other answers
RELEVANCY SCORE 40

I just bought a new laptop and after loading Office 2003 and formatting Outlook to get to my emails, I noticed that no flags were shown by the messages that I had already flagged. I also noticed that I cannot flag any of my emails. It is not an option in either the shortcut menu or on the toolbar. Nor can I figure out how to make it an option. My new computer is running Vista Home premium 64 bit. Not sure if that has anything to do with it or not. My old computer was running XP and it worked fine.
My server is an HTTP account through MSN.
Another thing I noticed was that there are no attachment icons next to any of the emails in the inbox. When I check them from web-based mail at Windows Live Hotmail, the icons show up.

Can any one walk me through the steps to enable "Follow Up" flags and to show the attachment icons in my email folders? I've already spent 3 hours researching it and haven't found any thing helpful.

Thanks,

Doug
 

Read other answers
RELEVANCY SCORE 40

On both of my Vista / WIN 7 PCs, the Farbar FSS scanner shows that TCPIP.sys has an incorrect MD5, but the Kaspersky TDSS Killer OK's the TCPIP.sys driver. Is this just a false positive from FSS?

PCs are all up to date, they all work OK, no redirects, no files flagged in Norton.

John

====

Farbar Service Scanner Version: 27-05-2012
C:\Windows\system32\Drivers\tcpip.sys [2012-05-11 08:40] - [2012-03-30 08:39] - 0905600 ____A (Microsoft Corporation) 27D470DABC77BC60D0A3B0E4DEB6CB91

====

TDSS rootkit removing tool 2.7.38.0 May 25 2012

11:48:48.0607 5724 Tcpip
(27d470dabc77bc60d0a3b0e4deb6cb91) C:\Windows\system32\drivers\tcpip.sys

11:48:48.0701 5724 Tcpip - ok

11:48:48.0716 5724 Tcpip6
(27d470dabc77bc60d0a3b0e4deb6cb91) C:\Windows\system32\DRIVERS\tcpip.sys

11:48:48.0763 5724 Tcpip6 - ok
====

A:FSS flags TCPIP.sys , TDSS Killer OK's it

FSS doesnt flag tcpip.sys as infected,it is clear from FSS log that tcpip.sys is cleanA (Microsoft Corporation) 27D470DABC77BC60D0A3B0E4DEB6CB91

Read other 6 answers
RELEVANCY SCORE 40

Sorry if this is repetitive, however, being fairly new, I have not found enough information to know what this is doing. I recently discovered this process running on my machine and so I started looking. 
Windows\system32\rundll32.exe C:\Windows\system32\inetcpl.cpl,ClearMyTracksByProcess Flags:8388616 WinX:0 WinY:0 IEFrame:0000000000000000
From what I can find, this process clears various cached data and that there are many Flags that are added up to include what is done. However, all I can find goes up to about 16000ish. As you can see above, the Flags on my process show 8388616.

Does anyone know or can anyone point me in the right direction to find what these flags indicate?
I appreciate the help!
Thanks!

Read other answers
RELEVANCY SCORE 40

For the first time in 7+ years, something bizarre happened to my Flag Status column. Here is how it has always looked until today:



Somehow, someway, I did something unknowingly and now my flags all look like this:



Does anyone know what I might have done and more importantly, how I can get the old look back?

It is a real problem since sorting the column does not sort the colors correctly.

Thank you so much for any insights. -Bill

A:lost Flags in Outlook 2003

Just found a video about use of flags in Outlook 2003. I looks to be quite comprehensive, so you might find what you did to change the appearance:

YouTube - Microsoft Outlook 2003 - Message Flags

P.S. I tried to insert the YouTube video itself, but failed miserably! So I included the link instead.

Read other 5 answers
RELEVANCY SCORE 40

Is there any reference site that gives explanations for the experimental settings in "opera://flags/"? I do not understand many of them, and need more information.

Read other answers
RELEVANCY SCORE 40

I'm helping a friend with an Outlook Express problem, but this one has me stumped. Every message she receives automatically has the flag and the paperclip (for attachments) set. There are no attachments, and no rule has been set up to automatically flag messages. Any suggestions on how to turn off the automatic flag and paperclip? She is running Windows XP and Outlook Express 6.
 

A:Outlook Express flags all messages

Read other 6 answers
RELEVANCY SCORE 40

I have been using this article to customise my run commands. I am trying to execute the command " "C:\Documents and Settings\HP_?garen\Lokala inst?llningar\Application Data\jagexlauncher\bin\JagexLauncher.exe" runescape ", however it says that it cannot find the file. When i remove the last line (thats called a flag, right?) it executes, but the application requires the line to know what application to launch (cause it says that it cant load the parameter file) so it doesnt work. Is there possibly a value i could add to the key which specifies the flags to be used?

A:How can i make my custom run commands use flags?

I think you have to use either the "-" or the "+" sign without the quotes just before the runescape flag. Do not use the quotes around the flag.
Hope this helps.

Read other 6 answers
RELEVANCY SCORE 39.6

Unpatched Microsoft bugs raise red flags.

Microsoft has released its security updates for the month of September, but a couple of unpatched flaws have some security experts wondering if the software company will be forced to release an emergency patch sometime in the month ahead.

Security researchers believe that an unpatched flaw in the SMB (Server Message Block) 2 software that ships with Windows Vista and Windows Server 2008 could turn into a major headache.

Related article: Fuzzing Snags a Serious Flaw in Windows.

Vulnerability hunters increasingly rely on "fuzzing", a technique that tries to break programs with pseudo-random inputs.

-- Tom
 

Read other answers
RELEVANCY SCORE 39.6

Hi

I am using Windows 8.1 Update and Windows ADK.

If I use the command


Code:
Dism /Commit-Image /MountDir:"<Mount_Directory_Path>" /Append /CheckIntegrity


to add a volume image modified, how should I do to set the name and description of the new image without using the ImageX command?

Thanks

Bye

Read other answers
RELEVANCY SCORE 39.6

I use Outlook 2003 and set up follow up flags and then sort by "due by" date. I recently got a new computer and inported all my files via pst folder. Everything came over except the dates - how could I get the dates to appear?
 

A:Outlook 2003 - Dates Follow Up Flags

Hi Djacks

Do you see the Due by date, when you open the .pst file instead of Importing it?

In Outlook 2003:
File > Open > Outlook Data File
Browse to the location of the .pst file and select it.
It should then appear in Outlook.
Are you using the same version of Outlook on the new computer?
 

Read other 3 answers
RELEVANCY SCORE 39.6

Suddenly this error pops up:gbb.flags is nonzero:0x00000039read-only firmware id:  Google_Glimmer.5216.198.11active firmware id:  Google_Glimmer.5216.198.11 Was previously used in classroom.Already tried OS restore from thumb drive.Any thoughts or tips for repair?????Thanks










Solved!
Go to Solution.

A:gbb.flags is nonzero:0x00000039 read-only firmware...

I have the same problem. We purchased alot of laptops for schools and reimaged them. This one came to us with a no power issue. So I replaced the mainboard, and this problem came up. gbb.flags is nonzero:0x00000039read-only firmware id:  Google_Glimmer.5216.198.11active firmware id:  Google_Glimmer.5216.198.11 Along with "OS verification is off at start up." And to turn OS verification on by pressing space key. - pressing space bar key only shows dev_key_switch off or something similar to that (since it goes by pretty fast). I did alot of research on it and it seems that it has something to do with the read/write screw on the Mainboard itself. Hardware manual also said the same thing, but when I removed the read/write screw on the Mainboard, the chromebook still will not let me go into Developer Mode. Did you ever figure out the solutions for this? Are you able to get into developer mode?

Read other 4 answers
RELEVANCY SCORE 39.6

I am trying to run the command REG FLAGS "hklm\Software\SomeKey" SET DONT_VIRTUALIZE and each time I run it on a 32bit version of windows 7 in our environment I get the help screen. Even if I put in a bad path instead of getting a message
that the path was wrong I get the help screen.   When I run it on my computer (Windows 7 64bit) it works as expected.
It does the same thing when I try REG FLAGS "hklm\Software\SomeKey" QUERY.  Its like the 32 bit version doesn't know what FLAGS is although it is present in the help screen.

Ideas?  Suggestions?  Recipie ideas?

A:reg.exe FLAGS command not working in 32bit environments

Hi Beast of Burden,
How did you test the command line ?
Input the command one by one manually or copy .Usually syntax screen indicates us that we have typed the wrong command .
Here is the command line I input one by one "reg flags "hklm\software\classes" set dont_virtualize".You can copy it and run it as an administrator to have a check .
We can add the output to check the result of the command line "reg flags "hklm\software\classes" set dont_virtualize >C:\1.txt"
Then check the content recorded in this txt file .(C:\1.txt)
Please also check the permissions of this registry key and the parent key and run the command line with administrative privilages.
Best regards

Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 5 answers
RELEVANCY SCORE 39.6

Hi Guys,

I'm setting up a new system for some of our users, and the long and the short of it is I want them to set flags on the outgoing mail so that when it reaches it's destination, rules on the inbox can use the flag to filter the mail into relevant folders.

For instance, in one example a user may create a new message, fill in the address, subject and body and then click on the 'message flag' icon on the toolbar, overwrite the 'Follow up' string with say 'For Canterbury' and then send their mail. When the mail reaches it's destination a rule reads the 'For Cantebury' flag and moves it into a relevant folder.

Now it all works fine, but the system is set to be expanded, and if possible I'd like to have a toolbar when a user creates a new e-mail, that has buttons relating to all the possible flags, they press the relevant button, and hey pretso the flag is set.

I tried recording a new macro, going through the process above, but none of the actions were recorded, if I had the vba script, I could easily amend it for all the given flags, and create a toolbar, saving them time, and me headaches as they're bound to make typos and the like if they manually have to type the flags.

So can this be done? If so, anyone know how? Or if not, can anyone think of another way of acheiving this?

Hope all that makes sense, and many thanks for any help you're able to offer me.

Nick
 

Read other answers
RELEVANCY SCORE 39.6

I have problems on my Windows 8.1 taskbar. Some of my icons have small symbols added to them and one of my programs, Internet Explorer, has TWO icons on the taskbar, one normal and one with an extra symbol overlaid on it. I'd like to know what these extra symbols mean and what I need to do to get rid of them.

This is definitely a case where a picture is worth a thousand words so I've done a screen cap of my task bar.

The icons with the extra symbols are (from left to right): Firefox, and the first Internet Explorer. (Ignore the tiny "1" on the Skype icon; I know that was just someone trying to contact me.) I can't make out what the extra bit on the Firefox and first IE icons is supposed to be; it's too small for me to make out. It could be a tiny "1" or maybe a graphic of a keyhole or something else. In any case, I'm trying to figure out what this signifies and what I need to do about it.

I also want to get rid of the duplicate IE icon and could do that easily enough with a left-click and then an "unpin from taskbar" but will getting rid of that extra bit of graphic on the first IE icon get rid of the duplicate automatically? I'm really not sure what to do here....

I'd appreciate some advice from the experts here :-)

Read other answers
RELEVANCY SCORE 39.6

What gives? New here so hi to all. I will try not to be a stranger..
I quote:
What is the current listing status for bleepingcomputer.com/download/rkill?
Site is listed as suspicious - visiting this web site may harm your computer.
 
What happened when Google visited this site?
Of the 5 pages we tested on the site over the past 90 days, 4 page(s) resulted in malicious software being downloaded and installed without user consent. The last time Google visited this site was on 2015-07-10, and the last time suspicious content was found on this site was on 2015-07-10.
This site was hosted on 2 network(s) including AS13335 (CLOUDFLARENET), AS15169 (GOOGLE).
 
Thanks for all you do.

A:Google Flags Rkill download as infected

Hi Goin2Dover This is a false positive coming from Google. I think that Grinler have to contact them and ask them to remove the warning, but other than that, every downloads hosted on BleepingComputer are completely safe.

Read other 3 answers
RELEVANCY SCORE 39.6

Chrome has a flag option that lets you set the maximum tiles number to 512 or something else(tweak to speed up Chrome). I was using it until today, when I found out it wasn't there any more( in the: chrome://flags ). So I'm asking if it's only happened to me or everyone else?
 

Read other answers
RELEVANCY SCORE 39.6

Hi

I am using Windows 8.1 Update and Windows ADK.

Without using the ImageX command, how do I change the volume image flags values displayed with the Dism /Get-ImageInfo /ImageFile:"<WIM_File_Path>\<WIM_Name.wim" /Index:<Image_Index> command?

Where are these values ​​stored?

Thanks

Bye

Read other answers
RELEVANCY SCORE 39.6

Now that Avira has re-classified IOBit related files as Trojans, how do I suspend or stop Avira?s constant nag popups related to Avira?s IOBit reclassifications? If I completely uninstall all the IOBit related applications and files from my PC and connected exterior storage devices, will that stop or get rid of the IOBit related Avira popups?

Can someone please tell me or direct me to a source to completely uninstall all the IOBit applications on my PC? I?ve tried uninstalling all the IOBit applications prior Avira re-classifying IOBit related files as Trojans, without complete success.

Also, can my PC be harmed if I don?t do anything with all the Quarantine files shown in the Avira Quarantine and Event Logs (Files Attached below)? What do you recommend I do with them?
 

A:Avira flags IObit PUA to Trojan Issue

Maybe its a false positive and you can report it to Avira.
You can also add them to exeptions.
Or you have cracked them and Avira detects the crack.
 

Read other 13 answers