Over 1 million tech questions and answers.

Desktop AMD A10-Series - hardware scan failures

Q: Desktop AMD A10-Series - hardware scan failures

Hi folks, I've owned this computer for about 90 days or so. It's ran pretty well up to this point. Now saved notepad documents open slowly as does my external storage drive. A scan was ran using the Lenovo solution center. The scan shows a number of failures in a storage device. The error code is: W13E7552K-4GA8B8. The areas of the failures are: ST2000DM001-1ER164 - 1.82 TBs (Targeted Read Test - FAILED) (SMART Short Self Test - FAILED) (SMART Drive Self Test - FAILED) Any suggestions on what to do about this? Pretty disappointed that I have a problem so quickly with this computer.

RELEVANCY SCORE 200
Preferred Solution: Desktop AMD A10-Series - hardware scan failures

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Desktop AMD A10-Series - hardware scan failures

It looks like you have got a defective Seagate HD, which means back up all of your important data to a USB or DVD drive ASAP, and once the backup is complete, you might try to create recovery media if you can. Unfortunately, sometimes you get hard drives that just go bad even from manufacturers like Seagate, and there is not really much you can do but to go to http://support.lenovo.com/ let it detect your system, click on Warranty and Repair and open a warranty support ticket online, or just call Lenovo Support at (877) 453-6686 and open a ticket over the phone. Typically they will send someone out to replace the hard drive with a new one under warranty. I had to have a system board replaced after about 7 months, and it took less than a week to have the part shipped and a tech out to install it, but with the HD, they might be able to just send it to you directly if you are up to installing it yourself. Good Luck,

Read other 1 answers
RELEVANCY SCORE 78.4

I keep getting 2 failures and am seeking solutions to fix them.  Thank You. 

























LENOVO HARDWARE SCAN FAILURES NOV 13 2016.jpg ?108 KB

Read other answers
RELEVANCY SCORE 62

I've been having a constant issue since I got this desktop with a popup message saying that a USB device needs more power than the port can supply. The only USB devices I use are a mouse, keyboard and an external hard drive and it seems to happen at random. I've run hardware scans and each time the results show a failure with the motherboard USB test. If anyone has advice about this issue it would be very appreciated. (I am using my old keyboard because I don't care for the one that came with the desktop, so I don't know if that could be the problem or not.)  

Read other answers
RELEVANCY SCORE 61.2

After purchase today, I updated hardware drivers with Lenovo's own program and have the following error code; Hardware scan detected one or more failures.Reference the error code below when contacting lenovo support at http://www.lenovo.com/eticket Result Code: WMB01A008-WL7D2L (it is under MOTHERBOARD  - USB Test) I am unable to access the 'eticket' site as it redirects me to the main support site and nothing shows on the error code when searching on the site.  Will appreciate your guidance.ThanksBB

Read other answers
RELEVANCY SCORE 60

Hi,
Recently I have had a series of hard drive failures. Three different hard drives have failed in the past month, two of them new. Each hard drive failed the same way, initially the MoBo would not detect the hard drive, I would then change the Sata port and it would be detected again. The hard drive would then start failing during use, as a result the computer would just reboot and I would be left with a non system disk error in bios. After that any attempt to use the hard drive fails because of many many bad sectors on the disk. What I need to know most is, what is causing the problem and is there any way to fix these bad sectors (I have used the Vista built in disk check to no avail.
cheers
Hynesy
 

A:Series of Hard Drive Failures

Have a look here: Tutorial: No POST (Power On System Test)

In particular to Benchtesting and cleaning your computer of dust (if it's a PC)

Also the power disperse should avoid you changeing Sata ports all the time

Let me know how it all goes
 

Read other 9 answers
RELEVANCY SCORE 56.4

Alrighty, here goes... I've searched high and low for an answer to this problem and even ran across a few similar sounding problems, but no real solutions. Unfortunately, I want to make this as short as possible, but hopefully typing up the whole situation in detail until "what's going on now" might isolate the problem.

About 6 days ago I was kicking back and enjoying a game of Savage, when suddenly the game crashed and the good ol' "submit X report blah-blah" screen popped up for submitting a crash report to S2 games. Thinking this was just a random crash that sometimes happens with the game, I tried booting it back up again. I get to the game menu, the monitor blanks out and all I get is sound. I try alt-tabbing out, ctr-alt-del - no response. So, I have to do a hard reboot.

System boots back online fine and I cruise around to see if maybe it's just the game or maybe my system is stressed for some unknown reason. So I try something a bit more rough, Doom 3. Starts running, initializing, the intro movie sound kicks in, but the screen freezes and the monitor blanks out again forcing another hard reboot. At this point, I am getting worried, I never overclock and heat has never been an issue in the two years this system has been running even with graphic intensive games (the graphics card is a Gainward Geforce Ti4600 - and has performed well up until now), so I decide to see if a driver went corrupt.

I check my drivers and do a DXdiag,... Read more

A:D3D/Hardware Failures?

Read other 10 answers
RELEVANCY SCORE 56.4

What part of a PC is most likely to fail?

Personally, I have had many dead hard drive experiences. Post your thoughts here.
 

A:Hardware Failures

Hi codexaenir

Components that have moving parts usually fail first. Hard drives, fans, floppy and cdrom drives. Then high power components like CRT and the system power supply.
 

Read other 1 answers
RELEVANCY SCORE 56.4

A friend has brought his PC for me to look at as he has been having some serious problems with it.

A couple of weeks ago, the PC wouldnt boot up past the motherboard manufacturer 'welcome' screen - after a bit of investigation, it looked like one of his RAM modules was bust.

We replaced the RAM and everything appeared to be working fine.

This weekend, it looks as though the HD has now failed - it boots past the 'welcome' screen but then we get a 'disk read' error.

I've removed the HD and tried to slave it to my PC but to no avail.

The motherboard is a Micro Star International (MSI) & the HD is a Western Digital Caviar WD1200 (120gig).

I've got a sneaky feeling (whether rightly or wrongly) that there could be an issue with the power supply - has anyone any views/advice?

Thanks in advance.
 

A:Hardware Failures

of course the PSU could be the problem...but we have to look at the underlying issues
here..did you test the RAM before you changed it - how did you test it ?....what have you used to test the HDD ?

HDD failure can be very insidious - it will make your pc do all sorts of strange things (like you
described) Find out for certain if the RAM is bust and/or the hdd.
 

Read other 2 answers
RELEVANCY SCORE 56

I posted this in the security forums, and there wasn't much success in finding a solution. Moreover, due to recent changes in the problem, this thread is best suited here.

New problem to solve. My computer's on the fritz. When I boot it into Windows XP Professional, I have about 15 seconds after logging in before my computer freezes. To prevent this, I looked at the taskmanager, and began disabling three all caps .exe files that start that were unfamiliar to me. I believed them to be a virus.

When I google'd them all, they appear to be programs that should be running. One is a Creative executable, and the others are monitor programs for an Epson Stylus printer I have access to on our network.

Only after I disable these does the machine work fine, for a while. It will still freeze up when I'm working once and a while.

I've run virus scans, spyware, and adware scans, and there appears to be no malicious files.

Whenever the computer locks up, 10% of the time, on a restart I'll get strange POST noises (a repeated one second beep). Usually turning off the machine and wiggling the RAM fixes this. The RAM is all fairly new, so I don't assume that to be the problem.

Just recently, when it froze, I got a very strange error just after the memory test. Something about a CMOS error, reverting back to defaults. I hit F1 to continue. Never seen this message until just now.

The computer seems to lock up when I'm taxing it by playing an intense ... Read more

A:Freezing / Hardware Failures

Read other 16 answers
RELEVANCY SCORE 55.2

For about six months now, I have been experiencing random restarts while using Windows XP. The problem started after I moved my PC to my new house, and I hadn't installed any new programs or hardware for several weeks. It had been very stable for several months before. I have unchecked the "restart on system failure" box, and still the restarts occur, with a blue screen appearing for half a second or so, not long enough to read. Microsoft OCA reports that the error is caused by a hardware failure. The erros truly are random and do not occur during specific tasks or programs. My computer will, at times, restart several times at night while I am not even using it. It may go several days without restarting, or may restart several times during a day, but has never gone an entire week without a reboot.
Here is what I have tried:

Flashed BIOS to the latest revision.
Replaced power supply (with a 500W Antec)
Reformatted and reinstalled Win XP (w/ all updates)
Swapped out RAM from another computer.

I am willing to spend money on new hardware, but I would like to find some way of determining the exact problem before I spend money replacing everything. Any advice would be helpful.

My specs:
P4 2.6, 800 bus w/HT
512MB PC3200
GigaByte 81PE1000 Pro F11 rev. Mobo
 

A:Random Restarts: Hardware Failures HELP!

Looks more like a heating , do u use any software to moniter system temp, also is the insides of your PC dirty(dusty) try cleaning them preferably using a brush (be sure to ground urself properly before cleaning), if u have already done this than post back to explore at other possibilities.

Hello and Welcome to techspot :wave: :wave:
 

Read other 10 answers
RELEVANCY SCORE 55.2

Hi friend,
Actually, I want to know how can I test for hardware failures in my computer. If any body has knowledge about it please give your opinion.

Thanks,
James
 

A:How can I test for hardware failures in my computer?

Ultimate Boot CD
Memtest
 

Read other 1 answers
RELEVANCY SCORE 54.8

Here are the test failures. The scan completes itself daily. Today the test completed in the background and when I viewed the results I saw the failures. I repeated the test and the failures still detected. What can I do with the code to locate the problem? Thanks.


























Untitledhh.jpg ?97 KB

A:Two failures during Lenovo Solution Center scan test

Here is the other image. 


























Untitledgg.jpg ?126 KB

Read other 1 answers
RELEVANCY SCORE 54.8

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\Stack registry errors using windows 7. How can I safely add this to my registry?

Read other answers
RELEVANCY SCORE 54.4

I have a Lenovo X61 laptop. A week ago the hard-drive I bought after getting the laptop died. I put the original hard-drive in and did a factory reset (Vista was jacked) using Lenovo's rescue and recovery.

The first reset never gave me the option to set up a user--it just set up an admin account.

I did another reset. That one let me setup a user account. I installed NOD32, Outpost, and Firefox. After rebooting I couldn't do anything without the computer crashing.

I did a third reset. Did the Sp1 upgrade. After a couple log-ins it started freezing again if I tried to do anything.

Same after the fourth reset.

I gave up on Vista and tried installing Ubuntu. The install made it to about 70% before giving me an error saying it couldn't finish the install, and that the disk could be bad. I tried burning Ubuntu to another disk. Same error around 70%.

I've done a full scan with the PC-Doctor in the rescue and recovery option. The only error that comes up is SMBIOS, which I've read doesn't affect the computer's performance.

Any ideas on what's going on?
 

Read other answers
RELEVANCY SCORE 54.4

I recently installed Windows 10 on my HP Elitebook 2740p. The installation went fine and the Os worked great. I come to a problem only when I restart the computer. Once it shuts down and begins to turn back on the Caps lock and Num lock keys on my laptop blink 5 times. According to HP support forums this signals a General Board Failure. When I shut down normally the laptop boots fine and after blinking 5 times the computer hangs for a second then boots up fine. I'm trying this on my laptop right now without any issues but I don't know how to tell if this is a false alarm caused by Windows 10 or if something in my laptop is actually failing.

A:Windows 10 causing false hardware failures.

There is a Windows 10 sister site to this one by the way. Windows 10 Forums I would try turning off sleep and hibernation and see if that helps.

Read other 2 answers
RELEVANCY SCORE 54.4

Hi,

Case study: 1 PC with Windows Server 2003 with public IP.
Apache Web Server installed and run a java-based application with an SQL Server 2000.
The clients are using browsers to connect to server.
The server and clients are using SSL certificate (server and client).

The question: I need to find which is the best solution to have no hardware failures ?
Backup ? Another parallel identical server with the same configurations ?
Any ideea, solutions or personal experience would be verry usefull.

Thanks,
 

A:I need to implement a backup solution for hardware failures

Read other 6 answers
RELEVANCY SCORE 54

Hi, I have a 2.5 year old Toshiba Satellite that has had major issues in the past year. In the last 6 months, I have had to replace the hard drive, fan, cooling system and processor.

Some specs:
Toshiba Satellite with Windows XP Home
1.60 GHz, 100GB Hard drive (replaced from 60 GB), 496 MB RAM

In February, the processor was replaced due to overheating caused by a broken cooling system and fan. Immediately after I got the computer back, I noticed that it is running extremely slow. It takes 15 minutes to boot up, five minutes to load Firefox and another five minutes to shut down. Additionally, the computer frequently freezes and occasionally stops/restarts and tells me that I have experienced a system error. It also gives me an error message at shut-down on occasion.

I've tried to check to see if the issue is with software or the memory, but I'm very sure it is not a software issue. Additionally, the computer has a 100GB hard drive that is less than 50% full. I've defragged the laptop, run virus checks and cleaned up all the spyware. None of that helps. I'm pretty sure that I have a hardware issue because the problems were immediately noticeable after the fan/cooling system/processor were replaced.

I saw the slowness in the tech shop, but the manager insisted that they had repaired the computer perfectly and that the processor simply needed time to "break in". I didn't believe him, but I couldn't prove otherwise, was in a foreign cou... Read more

A:Trying to diagnose hardware issues after major failures/replacements.

Most likely a setting in the BIOS setup. Go to BIOS and set the machine for best performance and see if that helps. You need to save the settings beofre rebooting. If that doesn't work try setting it to the default settings. If none of that works try looking at your Power Settings in Control Panel and set to Portable Laptop if it is a laptop and Home/Desk for a desk top.
 

Read other 2 answers
RELEVANCY SCORE 53.6

When I first built it, a RAM stick was bad so I replaced it with a quality set of Corsair XMS2. Few months later - The wire that connected my power button to the motherboard randomly combusted, resulting in me getting a new motherboard thinking it was the problem. I kept it. A month or two later - Apparently one of my sticks of XMS2 died. I took it out and was using the 2GB single stick I had left, I went to BIOS and loaded default factory settings, and BAM - my computer boots back up with this

Boot Block Compatible Version ver 024
Bad Bios checksum
Looking for USB drive
Looking for CD

A message similar to this. I got on my laptop, downloaded the BIOS and put it on the USB stick which was freshly formatted with NTFS. I put the stick in my computer, it erased, then programmed, and told me to reboot to get my system back. When I rebooted, black screen. I've reseated everything and bought some cheap RAM at Bestbuy too to see if RAM was the problem. I don't know what to do at this point.
 

A:Hardware failures out of the blue, will now fail to even POST or get a monitor signal

Read other 16 answers
RELEVANCY SCORE 52.4

Hi, I have been having a problem with my PC, I have built it myself and everything was properly installed. However I am having issues with blue screen restarts and hardware failure. So far I have lost 1 motherboard 1 of the sticks of ram went bad and all were replaced. Also 1 sata harddrive and 1 sata SSD have failed. I have since replaced all those parts and am still getting blue screens that restart my computer. These blue screens happen at random times and I am unsure what to do. my specifications are as follows.
 
windows 7 home premium 64bit
16 gigs kingston hyper X DDR 3
AMD FX 6100 6 core at 3.3 ghz
Nvidia Geforce GTX 460 SE
M5A97 LE R2.0 motherboard
 
 
I don't know tons about computers but I know enough to put one together and navigate my way around. So if someone can walk me through a way to get whoever is helping me the information they need to make a proper diagnosis that would be awesome.
 

A:rediculous bluescreen prob multiple hardware failures. mobo/ram/2 hard drives..

Well, I probably look at your power supply since you have not replaced that. It could be providing dirty power causing the other components to fail.

Read other 1 answers
RELEVANCY SCORE 50.4

I'm seeing some very odd remote desktop problems at work. The server is 2008 Server R2 64-bit. Unfortunately, I do not have administrative privileges. I have to escalate to another group in order to analyze logs. I have done this, but my team may meanwhile sit idle for days. All clients are Windows 7 Enterprise Service Pack 1 64-bit. I have full admin privileges on all clients. The clients that cannot connect are on a domain, and the clients that can connect are not on a domain. The server is on a totally different domain, and we are logging in with local user accounts.

Some of the clients can connect to the server using remote desktop. Other clients cannot connect using precisely the same credentials. This rules out a username/password error. However, it is some sort of username/password problem because repeated attempts will lock out the account. The remote desktop failure message is "invalid credentials." If I remove the system from the domain, the problem goes away! It seems like being on the domain is causing the credentials passed to the server to be invalid, even though we're typing the same username and password that work on other clients. We're specifying exactly the same username and password, and we're specifying a local user account by prefixing the username with the remote desktop server hostname: servername\firstname.lastname

They are on the same subnet, and I can literally move the network cable from one system that works to one that ... Read more

A:Mysterious Remote Desktop Failures

Any suggestions? Remote desktop works when I'm not connected to a domain. It does not work when I am on the domain. The username and password I'm using is identical in both cases. In both cases I am prefixing the username with the remote computer's local computer name: NAME\username

Read other 4 answers
RELEVANCY SCORE 48.8

My printer just stopped working. I use a laptop which has Windows 7. Green indicator light is flashing. Is there any hope and/or simple way of restoring this excellent printer? Thanks!

Read other answers
RELEVANCY SCORE 48.8

Is it possible to change the sound card on my sony vaio VGN-N130G laptop to one that is XP proffesional compatible? and is it easy enough for me to do it?

Also how much will this sound card be? Im looking for the cheapest one that will last a very long time, and im not bothered about the quality, just as long as im able to hear sound im happy

cheers
 

A:Sony Vaio N series hardware question

bump
 

Read other 1 answers
RELEVANCY SCORE 48

Hi everyone. Can anyone tell me what this code means. It relates to a failure in the random pattern test on physical memory.  Does this mean I have a fault on my installed RAM.Any assistance is much appreciated. Charlie

Read other answers
RELEVANCY SCORE 47.2

Hi all,
After building my first PC in december, I've had a string of bad luck with hardware failures. On my first video card, an EVGA 7800GT, the fan was dead...not sure if it was ever working, but as soon as I looked at it it was dead. (within a day or two). My second video card (another EVGA 7800GT) starting artifacting and tearing when I unplugged my power strip from the wall, then plugged it back in, about 6 months after running perfectly. I didn't think to turn off the power supply or turn off the power strip at this time. Not sure if the problem is related to the unplug/plug in routine or not. While this card was being RMA'd, I also got a new LCD monitor, a BenQ 20.1" widescreen with an internal power supply. While waiting for my new video card, I turned on the monitor...it showed the BenQ logo, then said no signal and shut down. However, when I got the new card and connected the monitor to the PC, the monitor would no longer power up. Not even a green power-up light, nothing on the screen. That is now being RMA'd for another of the same model.

So...I'm wondering if all of these failures, particularly the second vid card and the monitor, could be caused be some sort of power surges. I do have them all plugged into an inexpensive grounded, surge protected power strip that I got at Best Buy. My apartment is pretty old, and I'm wondering if the outlet is actually grounded or not...it is the three-pronged only outlet in the r... Read more

A:After several hardware failures, could I have "bad power"?

it sounds like you just had some bad cards. I have heard of many problems like that with the 7900's, however i'm not sure if the 7800's had the same issues or not.

your PSU is a good quality unit and should not have a problem with stable and sufficient power.

as far as your house wiring is concerned. even though most of your outlets are two pronged, there's a good chance that the outlet box that their mounted in is still grounded (and that your three prong outlet is in fact grounded as well)

you can buy an cheap outlet tester like this one to verify that your three prong outlet is grounded. or if you know what you're doing, a multimeter will work as well.

good luck
 

Read other 2 answers
RELEVANCY SCORE 46.4

Hi all,

Someone know a free software for scaning a pc hardware for error, i mean a software for scaning cpu, memory, adaptor etc..
Thanks

Guys
 

A:Hardware Scan

Dvi said:

Hi all,
Someone know a free software for scaning a pc hardware for error, i mean a software for scaning cpu, memory, adaptor etc..
Thanks
GuysClick to expand...

Hi Dvi,

Hmmmm. CPU tests generally exercise all of the instructions, so there are probably some benchmark tests that each CPU mfgr runs at the factory to verify that each processor meets its specifications. I know there are floating point tests and integer tests, and there are probably some generalized benchmarks that are run by the PC mags, etc. So, goggle for 'PC & benchmark test' and you should be able to find out where to get some - if they are free - not all are. There are specialized compiler tests which validate the compilers, and some may be nearly in the public domain - i.e. free to use as is, but must retain the Gnu license copyleft (as opposed to copyright) , like for Gnu C and C++ compiler, but most of the really good ones are probably by vendors and are paid.

Then there are memory tests which I can point you to:
Memtest86: http://www.memtest86.com
WinDiag: http://oca.microsoft.com/en/windiag.asp (Microsoft Memory utility)
MEMORyAL4.2.1: http://www.umopit.ru

There are also hard disk drive utilities from each of the drive mfgrs to test their hard drive functionality (S.M.A.R.T.):
Links to Hard Drive Manufacturers at: http://compreviews.about.com/cs/manhard/

You can also run SpeedFan (I run it on boot up from my system tray to monitor temps), and it also does a nice job of repo... Read more

Read other 2 answers
RELEVANCY SCORE 46.4

You can scan for viruses but is there such a thing as a hardware scan? I suspect I may have a hardware issue but am not sure.

Thanks.
 

A:Hardware Scan

Read other 8 answers
RELEVANCY SCORE 46.4

I ran a hardware scan 6/23/2016 on a 90ED0009US/700-251SH desktop.The motherboard usb test failed with an error code  WMB01A008-WL7AHH.What should be done about this? The computer seems to work ok.

Read other answers
RELEVANCY SCORE 46.4

Hi! I've been trying to start my hardware scan, but everytime I go for it, the computer gets suuuuper slow, eventually frozes, and I need to reset it. I've already uploaded Lenovo Solution Center, since I thought that could be the reason, but it still fails. What can I do?  Thanks!  

Read other answers
RELEVANCY SCORE 46

I opened them in notepad, one reads:

"
[.ShellClassInfo]
[email protected]%SystemRoot%\system32\shell32.dll,-21799
"

and the other:

"
[.ShellClassInfo]
[email protected]%SystemRoot%\system32\shell32.dll,-21769
IconResource=%SystemRoot%\system32\imageres.dll,-183
"

These appeared after a full Malwarebytes scan.
 

A:2 hidden desktop.ini files appeared on desktop after Malwarebytes scan

The desktop.ini files are backups that windows makes
when changes are made to the desktop.
I see them periodically because I have show hidden files
enabled in folder options.
I usually just delete them if I am not having problems with the desktop.
 

Read other 1 answers
RELEVANCY SCORE 45.6

thCan some one please tell me what this means??I am concerned about the warning:   the result code was WHD01000-DL7086 

Read other answers
RELEVANCY SCORE 45.6

I am using Windows 10 Home/64 on a Lenovo 700-251SH desktop pc.On 6/23/2016 i ran a Lenovo hardware scan and the motherboard usb test failed with a WMB01A008-WL7AHH error code.Can someone please tell me how to clear this up?As far as i can tell the computer is working ok.The hardware scan app is hung on this error.
 

A:Hardware scan error.

Read other 9 answers
RELEVANCY SCORE 45.6

The hardware scan returned a Result Code:WHD01V01I-HL9X0L indicating problems with my HDD: Targeted Read Test, SMART Short Self Test and SMART Drive Self Test all failed.  What do I do now? Thanks.

A:Hardware scan results

Backup your data now.Spidey101 offers great tips in this post:https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-g70-test-issues/m-p/3511074#M585...

Read other 1 answers
RELEVANCY SCORE 45.6

When I run my hardware scan as usual my storage devices scan (Targeted Read Test) failed so what can I do to fix it plz ?

Read other answers
RELEVANCY SCORE 45.6

I ran a hardware scan on my new E93Z which has Windows 7 Pro. Everything was fine except a Warning on the Local Connection test.The result code was WWF00F000-RJ7X1KI don't know how to find out what that means or how to fix it. Grateful for any help. Thanks

A:Warning in Hardware Scan

Same issue with a brand new W541.

Read other 3 answers
RELEVANCY SCORE 45.6

WDC WD10S21X-24R1BT0-SSHD-8GB - 931.51 GBs , smart status test failed, final result code:W1QXNCAL8-NXLHWBFailedSaturday, September 17, 2016 9:38:54 PMHardware scan has detected one or more failures.Reference the error code below when contacting Lenovo support at http://www.lenovo.com/eticketDate run: 9/17/2016 9:38 PMDevice: WDC WD10S21X-24R1BT0-SSHD-8GB - 931.51 GBsProcessor can anyone help on this? Thank You.

Read other answers
RELEVANCY SCORE 45.6

When I run my hardware scan as usual
 
my storage devices scan (Targeted Read Test) failed
 
so what can I do to fix it plz ?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

A:G50-70 - Hardware Scan Failed

Welcome ytmh1989
 
1. What is your laptop model?
2. What is the storage devices being scanned?
You may want to check for disk error with Command Prompt (Run as Administrator).In the Command Prompt, type chkdsk /f /r c:
 
3. Run the storage device scan again.
 
PeterThinkPad X40 | ThinkPad W520 | ThinkCentre E73 SFF | Yoga 11s | Yoga 3 Pro | Yoga 900 | Yoga Home 900 | Yoga Tablet 2 Pro | Miix 2 10" | IdeaPad Y460p | IdeaPad K1 | 3000 Y300 
Give kudos to reward people for their assistance | Mark thread solved if the solution works | I am an active volunteer, not an Lenovo employee
=====================================
List of Sound Enhancement Thread
T520 | W520 ; Dolby ; IdeaPad Slate Tablet ; Yoga 3 Pro ; X100e ; Vibe Shot ; Yoga 900 ; P50 ; P40 Yoga | Yoga 14 | Yoga 460

Read other 2 answers
RELEVANCY SCORE 45.6

Hi, I am having same issue with my G50-80. Result Code: WWF00F000-UL7XCH. Thanks.
 
 
Mod edit:   The above post was added to an old thread in the ThinkCentre desktop forum.   I created a new thread for it in the correct notebook forum.   That prior ThinkCentre thread is paraphrased here: 
 
"I ran a hardware scan on my new E93Z which has Windows 7 Pro. Everything was fine except a Warning on the Local Connection test.   The result code was WWF00F000-RJ7X1K
 
See https://support.lenovo.com/us/en/documents/ht076691 - should not be an issue according to this."
 

Read other answers
RELEVANCY SCORE 45.6

Deckard's System Scanner v20071014.68
Run by Jess on 2008-03-31 16:30:39
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Failed to create restore point; unknown error code 0x00000001


Backed up registry hives.
Performed disk cleanup.

Total Physical Memory: 383 MiB (512 MiB recommended).


-- HijackThis Clone ------------------------------------------------------------


Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2008-03-31 16:33:30
Platform: Windows XP (5.01.2600)
MSIE: Internet Explorer (6.00.2600.0000)
Boot mode: Normal

Running processes:
C:\WINDOWS\system32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\explorer.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\amVzcw\command.exe
C:\Program Files\Logitech\iTouch\iTouch.exe
C:\Program Files\Logitech\MouseWare\system\EM_EXEC.EXE
C:\Program Files\MUSICMATCH\MUSICMATCH Jukebox\mm_tray.exe
C:\WINDOWS\system32\dllcache\newhost.exe
C:\Program Files\Java\jre1.6.0_05\bin\jusched.exe
C:\Updater.exe
C:\WINDOWS\system32\RooTsoft.com
C:\WINDOWS\mrofinu.exe
C:\Program Files\Logitech\Desktop Messenger\8876... Read more

A:Ran Scan What does it Mean????(moved from hardware)

Download SDFix and save it to your desktop.

Double click SDFix.exe and it will extract the files to C:\SDFix

Please then reboot your computer in Safe Mode (without Networking) by doing the following :Restart your computer
After hearing your computer beep once during startup, but before the Windows icon appears, tap the F8 key continually;
Instead of Windows loading as normal, the Advanced Options Menu should appear;
Select the option, to run Windows in Safe Mode, then press Enter.
Choose your usual account.
Open the C:\SDFix folder and double click RunThis.bat to start the script.
Type Y to begin the cleanup process.
It will remove any Trojan Services and Registry Entries that it finds then prompt you to press any key to Reboot.
Press any Key and it will restart the PC.
When the PC restarts the Fixtool will run again and complete the removal process then display Finished, press any key to end the script and load your desktop icons.
Once the desktop icons load the SDFix report will open on screen and also save into the SDFix folder as Report.txt
(Report.txt will also be copied to Clipboard ready for posting back on the forum).
Finally paste the contents of the Report.txt back here along with a Combofix log..(below)

Please visit the webpage HERE for instructions for downloading and running ComboFix.

Don't click on the window while the fix is running, because that will cause your system to hang.
When finished and after reboot (in case it asks to reboot), it should op... Read more

Read other 1 answers
RELEVANCY SCORE 45.6

I don't really know what i should do and I hope this is the right board... W1F74XUFM-DMJNF5  ??

A:Hardware scan failed

The code is pretty much useless, but after the scan completes, you have the option to "View Log", which will display the results in plain English.    If you open the Lenovo Solutions Center, click on Hardware Scan, you will be presented the option to "See Last Results"   If you click on that option, you can then click on the 3.5" diskette icon above the "Final Result Code" to save the log to a file that you can then attach to a reply if desired. Cheers, 

Read other 6 answers
RELEVANCY SCORE 45.6

 Via the Lenovo Solution Center on my T440p Thinkpad, a hardware scan has detected a failure.  The eticket link provided inside Lenovo Solution Center (http://www.lenovo.com/eticket) did not take me to a working page. Here are the details of the failure.The "Targeted Read Test" of this device failed. I don't understand the meaning of this, whether it's serious or not so serious.  Greetings.

Read other answers
RELEVANCY SCORE 45.6

I picked up an old windows 98 box the other day to play around with, but it doesn't show POST at start up, even though it is set up to do so. Anyone know of an online hardware scan that will work with a machine this old?

thanks much
mystmaiden
 

A:hardware scan for old computer

You can try Belarc Advisor from here http://www.belarc.com/free_download.html or Everest Home Free edition from here http://www.belarc.com/free_download.html
 

Read other 2 answers
RELEVANCY SCORE 45.6

hi i have a hp 11o desktop pccan someone ples tell me how to boot from a memstick ples

Read other answers
RELEVANCY SCORE 45.2

Hi!Can someone tell me what this failure code means: WME800800-FL9D1KIt's related to a memory problem. Thank you!

Read other answers
RELEVANCY SCORE 45.2

Hello, At my laptop's prompting, I did a hardware scan and it came back failed on the eMMC Storage Device Read Test, but doesn't really tell me what to do about it. This is the code it gave me: WHD100100-DL7CCG I just bought this laptop a few days ago, so I'm a little confused about how there could already be something wrong with it.  This is the exact laptop I have, if it helps: http://www.bestbuy.com/site/lenovo-ideapad-100s-11-6-laptop-intel-atom-2gb-memory-32gb-emmc-flash-st... Thank you in advance!

Read other answers
RELEVANCY SCORE 45.2

My Lenovo Solution Center tell me to contact ur support for this failuer code: whd01v00j-dn7y7j Any help please.

Read other answers
RELEVANCY SCORE 45.2

Almost immediately after my warrant ran out I got a message stating that a Hardware Scan had Detected an error. Result Code WHD01V001-WM7WMF  It seems related to a Targeted Read Test and a Smart Short Self Test.  I had warnings on each of the Wireless Test also but I'm not sure the Wireless Network Adapter has ever worked on this well. At any rate, the computer is dragging so something is wrong but I can't pinpoint it. I don't have any known issues with virsuses or programs running in the back ground.  Unfortunately we don't have the money to get it fixed right now and I'm hoping that I can find some solutions or answers here. Any help would be much apprecited. Thank you. 

A:Hardware Scan Detected Error

Sounds like a disk problem.  Get a copy of CrystalDiskInfo (freeware) and see what it thinks of your HDD.

Read other 1 answers