Over 1 million tech questions and answers.

Updating bios

Q: Updating bios

Hello,today i wanted to update my bios (from "P02-A2" to "P03-A3) because i want to use my new processor - intel i7 3770, but after start updating i got sad massage "Rom file size does not match existing BIOS size".I have got a predator g3610 and i was installing it through DOS by using pendrive.What should i do now?

RELEVANCY SCORE 200
Preferred Solution: Updating bios

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Updating bios

P03-A3 BIOS description says:BIOS (for device with Ivy Bridge & USB 3.0 supported) has your Predator the Ivy Bridge microarchitecture? i don't think you can update P02-A2 version to P03-03, the BIOS flash is telling that, different ROM size.

Read other 6 answers
RELEVANCY SCORE 53.2

I have downloaded the bois from the lenovo official site. But when I am updating its show the error message not for this notebook . I have lenovo g500s laptop .other people also facing same issue for the same laptop .please help ...Thanks in advance...











Solved!
Go to Solution.

A:Lenovo g500s bios updating problem. While updating...

Pan761,
 
The correct version of BIOS update has been just released - BIOS Update for Windows 8.1 (32-bit, 64-bit)
 
Now there should be no problems with it's  installation.
 
Regards,

Read other 1 answers
RELEVANCY SCORE 49.6

Hi. I have a dell inspiron laptop. My problem starts when i tried to update my bios from a07 to a15. While the update is running my laptop screen suddenly turned blank but my laptop is still on. What should i do?

A:Bios update fail. Blank screen while updating bios

Please check and see if you can get into BIOS. By the way list Dell model number and version of window. Ex: Dell Inspiron 3543, windows 10
1. Power off computer
2. Power on computer, quickly start tapping F2 key continuously. Hopefully, you'll be able to see BIOS screen.

Read other 1 answers
RELEVANCY SCORE 49.6

AMD Dual Core processors - updating BIOS?

how do you do this?

thanks a lot
 

A:AMD Dual Core processors - updating BIOS/flashing BIOS?

Flash a BIOS?
You need to download the update from the motherboard manufacturer. Then follow the directions in the readme file that usually comes with it.
 

Read other 3 answers
RELEVANCY SCORE 49.2

Hello.I need to update BIOS on my notebooks.I used my second computer to creat  a BIOS recovery drive on my USB.I used this way:Recovering the notebook BIOS using an external storage devicehttp://support.hp.com/us-en/document/c02693833 I download recommended version:sp62234.exeAfter step "5. In the Location to Save Files window, click Change."The HP System BIOS Update Utility DOSENT opens and i have 2 errors: 1.IHISI: Get support mode fail in SMI!  2. BIOS did not support InsydeFlash!  Please help me.

Read other answers
RELEVANCY SCORE 49.2

hi there, i am fixing a friends old computer and the hdd was stuffed so i got a new maxtor diamondmax 9 for it. although once installing it i found out that it would only run in udma2 mode (checked it in another computer and it ran at full udma6)
so i suspect that the current bios cannot support udma5 or 6, so i am looking for a bios upgrade for it.
the bios string is 6A69RPRDC-00, the number on the actual motherboard is 35-C960-00-05
thanks for any help, i am really hoping i can make this board work at udma5 at least and not have to settle for udma2.
thanks again
-Moltenz

ps. i just found this
AM-960
04/19/2001-i815-ITE87X2-6A69RPRDC-00 ITE87X2 + Winbond-W39A
at http://www.plasma-online.de/english/identify/serial/mainboard/mb_aristo.html
if that is any help.
 

A:help with updating bios. cannot find bios upgrade - 6A69RPRDC-00

WOW..............

Old Machines.....(just like me... but can still perform to the max lol)

I your Bios has the option of udma up to 6 then generally the bios supports the Mode! and your problem is that the HDD does not support the mode (cant remember if you said it does).

You are probably using wrong criteria for bios upgrade search.
Try WWW.driverguide,com

You Need the MB's Manufacturers Name or at least the MB Chipset and bios Manufacturers Name as well. go to the Computers muanufacturers website (you probably done that already) and search model.

otherwise Download a System info utility from Tech Spot, I use SiSoft Sandra or AIDA32.. (sandra might cause bluescreen on older machines).. Aida problably will have link direct to bios update site. hope this was of some help
 

Read other 9 answers
RELEVANCY SCORE 46.4

i updated my bios and the fan is now very loud on it for some reason , im not sure why here's my belarc advisor list if anyone can help me get the fan back to normal that would be very helpful!

Windows XP Professional Service Pack 2 (build 2600) Packard Bell NEC SPIRIT 550
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.93 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache Board: Packard Bell NEC
Bus Clock: 133 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 07/15/2005
Drives Memory Modules c,d
80.02 Gigabytes Usable Hard Drive Capacity
63.95 Gigabytes Hard Drive Free Space

COMBO IDE5232CO [CD-ROM drive]
SCSIVAX DVD/CD-ROM SCSI CdRom Device

Apple iPod USB Device [Hard drive] -- drive 1
ST380011A [Hard drive] (80.02 GB) -- drive 0, rev 8.01, SMART Status: Healthy 480 Megabytes Installed Memory

Slot 'A0' has 512 MB
Slot 'A1' is Empty
Local Drive Volumes

c: (NTFS on drive 0) 80.02 GB 63.95 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
ashley 12/4/2005 4:57:52 PM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never
Marks a disabled account; Marks a locked account None detected
Controllers Display
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
SiS PCI IDE Controller None detected
Bus Adapters Multimedia
VAX... Read more

A:BIOS HELP!!!!!! fan very loud after updating bios

Read other 16 answers
RELEVANCY SCORE 46.4

hiiam new to this so forgive me if i have posted in the wrong placei own an hp 250 g4 recently i updated my bios and after successful update i tried to enter bios and its asking for admin password but i never has set any admin passwordit says system disabled  [ |  87228416] i can normally boot into my os but cant enter the bios plz help me 

A:asking for bios password after updating bios

When prompted for password try 38180438

Read other 2 answers
RELEVANCY SCORE 44.8

I am thinking of upgrading my pc by putting an Intel E8200 cpu with an ASUS P5E x38.

Im just wondering if this is as straightforward as I think because I read somewhere that most of the x38 motherboards are not updated for the latest E8+ cpu`s.

If this is so, does anyone know how to resolve this problem?
 

A:Updating bios

Read other 6 answers
RELEVANCY SCORE 44.8

I have a laptop in the shop and one of the things the tech is doing is updating the BIOS, he said they were way out of date. It got me to wondering, should I be updating BIOS on my other computer? is it something I can do? I don't really understand that part.
 

A:Updating BIOS

Check the PC (or motherboard) manufacturer's web site to see if there is a firmware update for the BIOS. If there is read the notes to see if you think that the fixes or improvements are worth it. Updating the firmware is doing a brain transplant so in the unlikely event that something goes wrong there will probably be no recovery.

Yes, you can probably do it, depending on the procedure given.
 

Read other 3 answers
RELEVANCY SCORE 44.8

Recently got an older Dell laptop with Vista on it. I know nothing has ever been upgraded on it and I'd like to upgrade the bios but Dell won't give me any information because it's not under warrantee. Is there a web site where I can go to that can scan for the correct updated bios and possibly scan the laptop and let me know what else needs to be updated or should I just take this into a repair shop.
 

A:Updating Bios

Is there a web site where I can go to that can scan for the correct updated biosClick to expand...

Don't know if anything like that exists. Why not just go to www.dell.com, Support section, and see if there is a BIOS update for that machine? Use the Service Tag for easier searching.

and possibly scan the laptop and let me know what else needs to be updatedClick to expand...

Dell may do that. Reinstall Vista (or Recover to factory defaults) if that was not done and then get and install the latest drivers from Dell's site. Install the chipset first.
 

Read other 2 answers
RELEVANCY SCORE 44.8

Hi all,

My PC seems to keep turning itself on after I power off and apparently a common issue is that you need to update your bios.

My Motherboard is GIGABYTE GA-78LMT-USB3 AMD 760G (Socket AM3+) Micro-ATX Motherboard. Using System Tools I've found out that my BIOS version/date is "Award Software International, Inc. F2, 10/08/2012".

I think I've discovered the correct motherboard on this site

This is how far I've got - unsure what I need, or should download from the options there (and even if I have the right site). Obviously I'm really cautious about all of this so would really appreciate any help or advice?

cheers

Scam

A:Updating my BIOS?

Hi,

Its a good idea to be cautious. Please check on your motherboard to see whether its a Rev. 4.1. If it is, then that is indeed the BIOS to download and install, and that is the correct site.

Regards,
Golden

Read other 4 answers
RELEVANCY SCORE 44.8

So lately i have been thinking of updating my BIOS now first of all how do you know when its time to upgrade and how does one go about doing this process. I have the Asus P8H61 MLE/CSM. Any insight or help is appreciated

A:Updating BIOS how and when

Unless there is a specific problem you're trying to fix, and you know for certain that the BIOS upgrade will fix that, do NOT do a BIOS update. This is nothing like apps version updates or driver updates. If something goes wrong during the BIOS update, your machine is turned into an electric brick.

My advice to folks is to NOT do any BIOS updates unless you are sure of the following:
1) You have a way to store off the current working BIOS code to a media that can be used to restore it
2) You have a way to restore that saved BIOS code if the update goes badly.

That said, ASUS board I have used in the past had something known as EZ-flash (or something like that) that involved you booting with a special key combination that then launched a BIOS update utility. You could then stick in a diskette or a USB stick and save off the current BIOS. IF that utility still exists with your motherboard, it will be explained in the manual that came with it.

Read other 2 answers
RELEVANCY SCORE 44.8

Will updating an A-Bit BIOS to the latest BIOS remove any Virus that is in the BIOS. And what BIOS Viruses are out there and what can you do to get rid of them?
 

A:Updating BIOS

If your BIOS is infected overwriting it with the latest version of the real one will overwrite the problem. Most of these however render your PC useless to the point you cannot even boot. SOme of the names are Chernobyl, PE_CIH, Win95.CIH, Win32.CIH, W95/CIH.1003, CIH.Spacefiller
Most AV sites have removal tools
 

Read other 1 answers
RELEVANCY SCORE 44.8

I bought a Yamaha CDRW and my system won't recognize it. It was suggested that I upgrade my BIOS to fix this problem. I have an Asus P2B Motherboard and when I downloaded the update, all I got was a Fax Viewer Document, not what I expected. Do I really need to update the BIOS? I am using Win 98 SE.

I have checked all the IDE cables and all configurations.......do I have a paperweight?
Any help would be great!

Rattzo
 

A:Updating BIOS

Depends on how old your bios are. If it's the last chance

Anyway here is link to your motherboard page
http://www.asus.com.tw/Products/Motherboard/Pentiumpro/P2b/index.html

You can just click on the link for the bios and get the upgrade, whichever you want, with or without hardware monitoring.

Have you tried the burner in another machine just ot see if the burner is good.
Differnet cable
Different power connector
Different master slave settings on ide's
 

Read other 1 answers
RELEVANCY SCORE 44.8

i have a nvidia geforce 9600 gt grahic card 1gb ddr3

i just wanna update its bios.
just to fix bugs.

plz tell me from where to download bios update?
 

A:updating bios

Read other 16 answers
RELEVANCY SCORE 44.8

I would like to update my BIOS. However, there is no download available for my computer and operating system on the HP site. 













Solved!

View Solution.

A:Updating BIOS

Hello, The BIOS update is available for WIN 8.1 and not yet tested and released for WIN 10 as of now. However you may try updating BIOS using HP support Assistant(HPSA)Download and install from here : http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl_ot_ob_ds_pd/hpsupportassistant_cc/dt#.WEY3fdV974Y Also please go through this document explaining how to use HPSA.http://support.hp.com/us-en/document/c03467905  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

Read other 2 answers
RELEVANCY SCORE 44.8

if anyone could help me on updating my bios it would be most appriciated. here's any vital information needed and if i left something out, please let me know and i apologize..

manufacturer: American Megatrends
bios rom size: 256k
bios id: 62-1030-009999-00101111-040201-VIA_K7
chipset: VIA 82C3189 rev 0
 

A:Need Help Updating BIOS

http://www.techspot.com/vb/showthread.php?p=120976&posted=1#post120976
 

Read other 1 answers
RELEVANCY SCORE 44.8

1.Please use the prepared boot disk to boot into DOS mode. Then, type in the following commands?

afudos /i For example, afudos /ip4c800b.rom,


refers to the fullname of the BIOS file. The following shows the procedure of BIOS refreshing.
_________________________

How do I find out the fullname of my BIOS file? I typed in the given one, but it said error: can't open rom file.
 

A:Need help on updating my BIOS

The file is on your floppy. Just look at the contents with the dir command or browse the thing in Windows or whatever.
 

Read other 2 answers
RELEVANCY SCORE 44.8

While I"'m installing software downladed from your website, it shows IHISI: Get suppport mode fail in SMI. and then BIOS didn't support insyde Flash

A:BIOS is not updating

We need the exact model number of the laptop and identification of the BIOS update you are trying to install. 

Read other 1 answers
RELEVANCY SCORE 44.8

Hello!

My OS is Win7 ultimate 32-bit.
I have an Asus P5LD2-X/1333 motherboard. I used to have a Intel Pentium Dual-Core 1.80ghz. Today I installed a Intel Pentium Dual-Core 2.50ghz E5200. It's running just fine, without any software updates. However when starting the PC I get the following message:

Unknown CPU detected. Update BIOS to unleash it's full power.
Fress F1 to continue.

As I said, Windows runs just fine. But I feel like I should update the BIOS (or should I really?).

After 2 hours of failed attempts to update it, I find myself here. The update file i got from the Asus site is a .rom, so I can't run it with Windows.

So what have I done?
First I created a bootable flash drive with the .rom file on it using windows's tools (cmd > diskpart) as fat32. When trying to boot it (after I changed the boot order) I get a message saying "Remove any storage or media". When I use the BIOS's EZ Flash I get the following loop:

Checking floppy...
nothing found!
Checking CD...
nothing found!
etc etc

I tried the same, this time with ntfs - same results.

Then I did the same, this time making the flash drive bootable with Rufus. The results are mostly the same, but this time when I boot it, I get a flashing "_" at the bottom left of the screen. It stayed there for 6 minutes and I eventually lost patience. Should I have waited more?

Final note: I had been using a 2gb and a 4gb flash drive. Just now I've read that I have to use a f... Read more

A:Help updating BIOS

Bear in mind that if you screw up a BIOS update, it's very easy to turn your pc into a doorstop.

Read other 2 answers
RELEVANCY SCORE 44.8

BIOS: Phoenix - AwardBIOS v6.00PG

That is my bios from dxdiag...where can I update it?
 

A:Updating...BIOS

best place is from the Motherboard manufacturers website.

wrs
 

Read other 3 answers
RELEVANCY SCORE 44.8

Recently discovered my BIOS is from 1999, All i know about it is that is is a Dell AO6 Revised, where can I get an update (preferably for free)?
 

A:BIOS updating-ing

I would check Dell's web site. Only update your BIOS if you have a reason to do so! If everything is working OK leave it alone.
 

Read other 1 answers
RELEVANCY SCORE 44.8

I need to upgrade my BIOS in an attempt to hopefully fix my new video card. I have a Phoenix ROM BIOS PLUS Version 1.10 A05. Anyone know where to get the updates and how to do them? My computer is Dell Dimension 2400. Thanks.

Oh and I don't have a floppy drive. So I'm not sure how to update the BIOS without one.
 

A:Updating BIOS?

Read other 9 answers
RELEVANCY SCORE 44.8

Can anyone set me in the right direction on what I need to do to update my bios? I am running windows 95 4.00.950b on a Compaq 575 Deskpro with 32 ram and a screamin 518 megs of hard drive.

I have run a Compaq Diagnostics Version PC10.19A and it shows these ROM Revisions that seem older than dirt:

System ROM
Revision: 05/20/1998
Family: 486G
Video Controller ROM
Revision: 12/01/1994
Family: V1
Keyboard Controller ROM
Revision: C.7 06/14/1991
Family: K

I downloaded and ran one of those utilities that tell you what you have on your system and it couldn't even recognize my bios and told me I needed to update it so I thought I would give it a try...

While I got you here (and if I need to address this in another thread I will) In my controll panel / system/ Devices /hard disk controllers I have 2 "Standard IDE/ESDI" listings...as far as I can tell they have diferent input/output ranges and IRQ's...I THINK I remember reading somewhere that this could be a problem...any light you can shed on this cunundrum would be appreciated.

Thanks..you guys are the greatest and btw with your help I finnally found that graphics controller I was looking for and it seems like I have a new computer...WOW..."look at the colors man"(Dennis Hopper-Easy Rider)
 

A:Updating BIOS

Read other 6 answers
RELEVANCY SCORE 44.8

when im done building my pc and installing the os, do i need to download all the updates for the bios that were released? or just the most recent one. because im confused that if i download the most recent update, it wont fix all the bugs that the updates before it fix
 

A:updating bios

Read other 8 answers
RELEVANCY SCORE 44.8

Hiya doin' CHILL here, I need to know how to update my BIOS for my E-machine W3623 System. The BIOS is very outdated (7/29/2005) which I think maybe causing certain performance issues I have been having. I at least want to have the most recent BIOS running for the machine (for optimal performance) which I have already looked into (which is the Coconut Creek CR94510J[1].15A.1015 2009). I realize this update MUST be downloaded straight from the manufacturer ONLY or I could risk screwing myself over.

I downloaded the file from the E-machines support site. Problem is, when I try to run it I get the Intel Express Update Set-up screen which comes up and then it says "This program is unable to continue. Internal System Error: This is a programming or internal problem." After that I can't continue and the process automatically shuts down. So now I'm stuck and don't what know to do. Here is some more information about my system:

Operating System: Windows 7 Ultimate 64x
Intel Express Family Chipset 82945G
RAM: 2GB

Also another side question: Is this unit capable of more RAM than 2GB? Thanks in advance and I would GREATLY appreciate any help I can receive on this as I am lost. Let me know if you need anymore specific specs on the system.

A:Need BIG help with updating BIOS

Welcome to SevenForums,

Performance issues aren't necessarily fixed up updating the BIOS. You are running a fairly low-spec PC so I wouldn't expect the performance to be outstanding. What sort of issues are you having? There may be easier way to fix this.

That is the correct BIOS update - how are you flashing the BIOS?

Unfortunately, your machine supports a maximum of 2GB only.

Regards,
Golden

Read other 9 answers
RELEVANCY SCORE 44.8

Hi it seems that I have a problem with my SATA II speed settings. Apparently this might be due to a lack of BIOS / Motherboard support for SATA-II - is there a way to check for this? I mean, I can check the BIOS settings, but I dont see any particular reference to SATA-II - Is there a resource to cross reference my particular BIOS generation or type to see if it does allow SATA II? Thanks!

A:Updating BIOS - should I do this?

It seems that my BIOS might not support SATA II If is does not, can I, should I - upgrade my BIOS? (My laptop is about 1.5 years old now - should it have SATA II installed in the BIOS settings?) Thanks!

Read other 9 answers
RELEVANCY SCORE 44.8

Hello, My laptop is Pavilion 15-e017tx Notebook and i need to update the bios. After downloading the .exe file in the installation wizard it showed "options for creatin partition as recomended  " & "proceed without creatin the partition".What should i do. I dont have the recovery parition drive in my laptop as i formatted it by mistake. What shold i do. Or can i proceed without any partition create and i want to know actually what is created in the partition. Thanks

A:Updating Bios

 Your laptop with Windows 10 installed has no updates for anything including the BIOS. Only updates for Windows 8x and 7. The latest BIOS version is F.24A I have updated BIOS a number of times but have never come across the installer asking about creating partitions.

Read other 5 answers
RELEVANCY SCORE 44.8

While updating BIOS..when my laptops restarts it stops with a blank screen and caps lock starts blinking two times

Read other answers
RELEVANCY SCORE 44.8

I need to update my Motherboard Bios. I found the site and downloaded the Bios file. I was cautioned by the Motherboard site to first make a copy of my existing Bios. Just how do you do this? How do you get to look at the Old Bios to copy the file name down or even copy it to a floppy?
I'm runnging Win 98 SE on a new ABIT motherboard.
 

A:Bios Updating

Read other 9 answers
RELEVANCY SCORE 44.8

Hi, I just bought a new graphics card, Geforce GTX 960.On the support page of EVGA, manufacturer of my card, they stated that I either have to update my BIOS or buy a new motherboard...I checked the website and there seems to be no update for bios available.My current version is AMI 7.13, 5-1-2012. Does that mean that there is no other option than to buy a new motherboard?

A:Updating BIOS

You can try a compatible graphics cardhttp://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Official-list-of-supported-graph... Or check with the manufacturer of the card

Read other 2 answers
RELEVANCY SCORE 44.8

Hey, my laptop has been giving me some pain recently with BSODs when exiting Source games. I've also been experiencing performance drops in these games and in others which were all fine some time ago. Steam support suggesting updating my video and audio drivers (which I did) but they also said I should update my BIOS.

I have never updated my BIOS before and want to ask what and where should I get an update for my laptop, how to apply it and things I should be careful about. Also, would this void my warranty?

The laptop is an Acer Aspire 5742ZG
OS Windows 7 Ultimate x86
CPU Intel Pentium P6100
Motherboard Intel(R) 5 Series/3400 Series
Memory 3 GB DDR3
Graphics Card(s) NVIDIA GeForce GT 420M

LE: Also, while we're on the subject, do you have any good reads on BIOS updating and when it should be done? It's unexplored territory for me

A:Need help updating BIOS

Hey, first thing you need to do is type msinfo32 in the Start button search/run box. In the window that opens, look up the field Bios version/date and tell us what exactly you see there. This tells you the version number and date of the currently installed bios. By knowing this it can be determined whether an update is actually applicable.

Bios updating used to be a dangerous business in the earlier days but with better and more user friendly tools its quite OK, as long as you take certain precautions. However, do remember that no matter you do everything right, theres a very small chance that your mobo can get bricked, so the responsibility is all yours.

Not trying to frighten you, just need to be careful and be prepared.

Read other 9 answers
RELEVANCY SCORE 44.8

So the motherboard should be compatible with some of the ryzens.But will the bios support it ??

A:Updating the bios ??

@letsthrowq, welcome back to the forum. There are letters associated with the model, such as, nc, nf, nt or no.  Once I have this information, I will able to answer your question better.

Read other 1 answers
RELEVANCY SCORE 44.8

Mod Edit:  Split from http://www.bleepingcomputer.com/forums/t/580653/windows-81-black-screen-with-cursor/ - Hamluis.
 
I got the same thing except I'm pretty sure a virus wiped out the BIOS (Basic input Output System) I got a update Bios based on my model on a USB and am currently trying to figure how to load it through EFI Shell, which is simular to DOS i guess

A:Updating BIOS

Please explain what is going on with this computer.
 
Does it run at all?
 
What makes you believe your BIOS is infected?

Read other 1 answers
RELEVANCY SCORE 44.8

I recently put in a new motherboard, a new cpu, and new ram. the computer POST is fine but when it gets to the load windows screen, it just reboots. there is no error, just flashes to a blue screen, then restarts the computer and when it restarts it comes to the screen asking me to choose between restarting in last known good configuration, or in 3 different safe mode options. all of them just repete the process. i tried reinstalling the windows from the boot cd and it reinstalled it fine with no errors, but when it restarts the computer it still wont get passed the load screen. Someone sugested that maybe i have to update my BIOS becase of the new motherboard and new cpu. can someone please explain why that might be, what the symtems are of needing a BIOS update, and why it would help me? im just looking for some clarification before i run such a risky procedure. thank you, kevin
 

A:Updating BIOS

Did you reinstall windows after fitting that lot? If not, thats your problem.
 

Read other 41 answers
RELEVANCY SCORE 44.8

Basically I want to flash my Bios, but the thing is... I am not sure which I have to choose! is it all of them? do I choose the latest one? I am lost.

Bios updates: http://www.gigabyte.com/products/product-page.aspx?pid=3863#bios
Motherboard: GA-Z68A-D3-B3 http://www.gigabyte.com/products/product-page.aspx?pid=3863#ov

your help is really appreciated.

(p.s. if I am correct, my current version is F3. Not even listed!)
 

A:Updating BIOS

You only choose one and that is usually the latest one.

That said, are you having a problem that you hope the BIOS update will fix? If not, see the warning:

"Warning:
Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction."
 

Read other 4 answers
RELEVANCY SCORE 44.8

I have a Pavillion A6200NI am using Windows 7I would like to update my Bios (Phoenix Technologies LTD 5.20 10/3/2007) but not sure how.I checked HP and one is not offered.Any ideas on how I go about finding and updating my Bios?MotherboardMCP61PM-HM (Nettle2)Manufacturer: ECS

A:Updating Bios

Hello fredb38, I managed to locate a BIOS update for the motherboard you listed. You might take a look at the information in the link below and see if it is what you require. MCP61PM-HM Motherboard BIOS Update    BIOS Link Here   is a link for the drivers and software for your system. Hope this helps.

Read other 9 answers
RELEVANCY SCORE 44.8

How risky is bios updating. asus sabertooth x58

A:Bios updating

ocir, your motherboard site shows that the latest bios is:
Sabertooth X58 1304 BIOS
2011.09.26 update

I would download the update and most bios system updates have a choice to accomplis from booting a disk
or from the Windows OS.
Choose which you want to do,

I have done this lots of times, mostly from Dell but also intel and asus.

Rich

Read other 5 answers
RELEVANCY SCORE 44.8

I'm really not sure if I should update my BIOS or not. I'm trying to optimize my Windows 7 x64 and get it updated. I've been following this tutorial, Optimize Windows 7, but I'm unsure weather or not to update my BIOS.

I have an ASUS M5A97 R2.0 motherboard, and I haven't had any problems with it. However, I noticed I'm running version 1006 from 10/17/2012. The latest is 2301 from 3/27/2014 and it improves system stability (not to mention the countless updates and fixes between versions 1006 and 2301).

Plus, there's some chipset drivers for AMD and I've been having problems getting my CCC started.

So... should I update or not?

A:Updating the BIOS?

Read the BIOS notes for the fixes it provides. I do not recommend updating the BIOS unless it has a fix for your issue.

Read other 9 answers
RELEVANCY SCORE 44.8

how can i update my BIOS? sisoft sandra claims that my BIOS is old and needs to get update...

General Information
Manufacturer : AT/AT COMPATIBLE
Version : Award Modular BIOS v4.51PG
Date : 06/16/98
Plug & Play Version : 1.00

Performance Tips
Tip 201 : System BIOS is old. Check for an update.
Tip 200 : SMBIOS/DMI Interface not supported. Check for a BIOS update.

I just can't find an update from the internet...plz help!!!
 

A:updating BIOS

Most manufacturers have updated BIOS on their websites for download. If it is a custom build, the motherboard manufacturer will have one.

It is not usually necessary to update BIOS unless you have a particular issue that the update resolves . .

wrs
 

Read other 3 answers
RELEVANCY SCORE 44.8

I have:
American Megatrends
BIOS date: 04/25/01
BIOS ID: 62-0425-001437-00101111-071595-SiS730S-M810LR
Chip Set: SiS 730 rev 2
OS: Microsoft Windows XP Version: 5.1.2600
CPU: AMD 1.2 GH

What do I need to update my BIOS

Thanks in Adv...
 

A:Updating BIOS

Read other 15 answers
RELEVANCY SCORE 44.8

Hi,
its a bit lengthy and might not seem a really general question; but I guess Im only asking for basic understanding here:

Im occasionally getting the error 13 :
: The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.

I thought I would do a bios update. I googled it and found this,
when I go to the manufacturer website (here) , I cant see any batch file that the manual mentions, instead there is exe files to updating the version of bios. when i download and run them, I get the error saying that the file didnt install properly and if i want to redo it with the recommended setting. I tried checking the version of the bios externally with a software and it seemed its still the previous version. I tried reinstalling the update using the new settings, same old same old.
note: in the sony website it says:
This BIOS update must be installed before upgrading to Microsoft? Windows Vista? operating system. ( the computer was shipped in xp)
I have missed it.
anything I can do?

cheers,
Shahab

Read other answers
RELEVANCY SCORE 44.8

Hi i have just bought a new laptop as i fried the MoBo in my last one which i bought in the early days of Vista, not realising what system requirements were for Vista i landed up with a very under resourced in the hardware dept. laptop and i am shure my constant tinkering with the hardware caused the death of it. Which brings me to my query (now that i am overly paranoid about tinkering with hardware) i have been researching and have found there is very mixed opinion on applying Bios updates and was wondering what people here thoughts are? I have two pending Bios updates 1st addresses better support for SP2 and the 2nd improves system performance & LCD panel brightness.
and if i apply these updates do i need to do both updates or just apply the current one, any opinions would be greatfully received.

A:Updating the BIOS

Bios updates are mutually exclusive (ie, you can only have one installed). I believe that most bios updates are cumulative so if you choose the newest one you should get both of these issues addressed.

Read other 2 answers
RELEVANCY SCORE 44.8

Not sure if this is the right subforum.  System specs: Model: HP Pavilion p6522f desktop PCProcessor: AMD Athlon II X4 635 2.9 GhzMemory: 8 GB RAM installed  (2 sticks x4)GPU: Nvidia GeForce GTX 560 graphics card Motherboard: CPU-Z tells me it's a "FOXCONN" model "2A92 1.01" and the BIOS is American Megatrends Inc. v 6.09 09/07/2010. My BIOS seems very out of date (3 years old) and I would like to update it. I use this computer for gaming, and Borderlands 2 is unreasonably laggy even on mid/low settings, and I've read in multiple places that making sure the BIOS is updated is an effective fix. How do I go about doing this? What's the right .exe to download and run?  













Solved!

View Solution.

A:Updating my BIOS?

Hi, You can find new BIOS up to 8th May 2013 on the following link:    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4254837#N682 Regards.

Read other 6 answers
RELEVANCY SCORE 44.8

Hello, I'm trying to update my bios version so I can run a virtual machine on my laptop. My current bios version is Insyde F.13 I know that sometimes this can create issues, but however I cannot update it for some reason.. Thank you.

Read other answers