Over 1 million tech questions and answers.

Mother Board Replacement Help

Q: Mother Board Replacement Help

Hey guys
i have a compaq presario SR1610NX Recently i shorted out my mother board while doing a proccessor trade out (trust me the proccessor is compatable as the computer did run for a while after the switch). anyway i called up compaq and they say that my mother board was discontinued and they tried to sell me a whole new tower. i need a compatible replacement. im using a AMD Athlon 64 3700 proccessor.
Please Help Me- Dr. Feelgood

RELEVANCY SCORE 200
Preferred Solution: Mother Board Replacement Help

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Mother Board Replacement Help

Read other 11 answers
RELEVANCY SCORE 84.8

Is it possible to purchase a mother board for an older hp desk top model # P6216F if so where could I purchase one.thank youAnthony Simonie

A:Mother board replacement

Motherboard P6216F  If you found my answer helpful please say thanks by clicking on the Thumb's Up icon.        If my answer solved your problem please mark it as the Accepted Solution. Thanks!

Read other 1 answers
RELEVANCY SCORE 84.8

How to get replacement Mother board from HP

Read other answers
RELEVANCY SCORE 84.8

Last night I tried to replace the mother board on my Dell Inspiron 5000e laptop. I bought the replacement part from an Ebay store, and it is still under warranty (90 days). After taking apart my entire laptop and putting the whole thing back together--a job that took my friend and I three hours--we plugged it in for the moment of truth. The battery light came on, so far so good. Then we hit the power button and...nothing happened. Well almost nothing. The machine appeared to turn on. All three lights on the the bottom of the LCD went on, but that's it. The fan didn't start, the monitor didn't start. The hard drive light was on but didn't appear to be reading at all. (i.e. no blinking or noise.) I'm quite perplexed. Everything appeared to go back together perfectly with the possible exception of the diskette drive cable clip, which we weren't exactly sure whether to put back in over, under, or through the disk drive data cable. We eventually put it through. For instructions and pictures of the process, check out link:

http://support.dell.com/support/edocs/systems/pblan/removing.htm

Everything else seemed to go back together seemlessly. We were very careful with screws and put all the right sizes back into their correct places. What could be causing this? Have I received a defective part? Are there any other explanations? I suppose a possible explanation is that the processor and/or video board are not quite connected correctly, but they seemed t... Read more

A:Mother Board Replacement

Read other 13 answers
RELEVANCY SCORE 84.8

unplugged elect cord of phone from voltage surge protection,computer went off but light stayed on.  I've been told it was my mother board,  This machine has stuff I need and I  would like very much to fix it.  Does anyone know where I can get this done?

A:MOTHER BOARD REPLACEMENT

A local computer repair shop is the best bet, but for a computer that old, it will probably cost more than it is worth.  Best option is to salvage the data from the hard drive onto a working PC.  Easiest way to do that is to remove the hard drive from the old Pavilion A6400 and connect it to a working PC.  If it is just to retrieve the data, an adapter similar to this will work nicelyhttps://www.amazon.com/AGPtek-Drive-Adapter-Converter-External/dp/B00BIE996S/ref=pd_sim_147_2?_encod...

Read other 1 answers
RELEVANCY SCORE 84

I don't think the model will matter, however, mine is a Pavilion Slimline s5510f. With thanks from this forum, I have determined that I need to replace my mother board.  I have found HP support documentation on how to replace the mother board, but that leaves the question as to whether I have to do any type of programming of the new mother board or is the MB more or less a plug and play? Thanks for any help.  

A:mother board replacement and programming?

Hi, Actually you can't do anything with motherboard (only updating BIOS which is still in the hands of vendors). What you see is what you get or using your terms: it is a plug-and-play part. Regards.

Read other 1 answers
RELEVANCY SCORE 83.2

I have a HP Pavillion x360 (13z-a000) that I bought two years ago.  The CPU is dead.  The computer does not power on and the Caps Lock button blinks constantly (single blink).  I brought it to a local shop and they confimed this but they do not fix HP.  If it is the motherboard, can I just buy one and replace it myself?  Where can I buy the mother board?  How do I find the part number?  
 
The serial number is [Personal Information Removed]
 
Larry

A:Pavillion x360 mother board replacement

Here is the Manual: Service Manual There are 4 different AMD motherboard depending on if you have the A8 processor or the A6 and Windows Standard or Pro. Get the same Windows version as you have or you will have to buy another copy of Windows. Your hard drive installation of Windows will not activate unless you install a motherboard set up for the same OS version. Post back if you need a more detailed explanation. Yours is a CTO laptop so we cannot just look up your original factory specs. You can interchange the A6 and A8 version of the motherboard with the caveat stated above. The Manual shows the "how-to" on replacement. Assuming you have the A8 and Windows Standard this is the part number: 769075-501 This is it on US amazon.com for $109 which is a pretty fair price: https://www.amazon.com/HP-Pavilion-Convertible-Motherboard-769075-501/dp/B0118AZL1S/ref=sr_1_1?ie=UT... Post back with any more questions.  If this is "the Answer" please click "Accept as Solution" to help others find it. 

Read other 1 answers
RELEVANCY SCORE 83.2

I have to change the motherboard of the above laptop and would appreciate indications on the manufacturer of that part and serial number. Best regards Michel Bellier

Read other answers
RELEVANCY SCORE 83.2

What is the correct procedure for replacing the MB battery? Power off? etc. I have a alton m760v MB that reverts back to cmos defaults after being unplugged for a couple of days. Is this normal, I have 2 that do the same thing. Old batteries ?
 

A:Mother board battery replacement procedure?

CMOS should only reset if there is something wrong, or if a battery is bad.

Replacing it is just as you said - unplug power, take out the old one, put in the new one.
 

Read other 1 answers
RELEVANCY SCORE 83.2

I have an Emachine T-3092 and need to replace mother board and CPU potentially due to a failure. Have not replace one before. Need to know suggested motherboard as I could not find it on E-Machine website. Thanks.
 

A:Emachine T3092 Mother Board Replacement

You will most likely end up replacing everything except the case. Any ATX or mini-ATX board should fit. How many PCI slots do you have now? 3? The power supply should be changed while your at it... Just deside what processor and memory you want to use, and select a motherboard that will run it.
 

Read other 6 answers
RELEVANCY SCORE 82

One of my 2 Gb Corsair Ram sticks has stopped working so looking to replace all the others . At the moment I have 6 x 2 Gb Sticks = 12 Gb .
Can I use 2 Corsair Vengeance 8Gb sticks , As I am not sure if the X58 mother board will support just 2 sticks or do I have to replace and fit 6 x 2 Gbs sticks the same as was fitted .
At the moment I have 6 x Corsair Ram Sticks there specs are 2048 Mb 1866 MHz 7-8-7-20  1.65v ver2.1 DDR 3
Replacement sticks I was thinking of fitting are Corsair Vengeance Pro 16 Gb DDR 3 1866 MHz  Red 2x8Gb 1.60v Ver8.22 .
Any Thoughts any one Many Thanks

A:Suitable replacement Ram for Alienware Aurora r4 with a X58 mother board

You cant use 1.6V RAM
Ballistix Sport 4GB DDR3-1600 UDIMM
CT2849354

DDR3 PC3-12800 • 9-9-9-24 • Unbuffered • NON-ECC • DDR3-1600 • 1.5V • 512Meg x 64 •
upgrade for Alienware AURORA-R4 system.

http://www.crucial.com/usa/en/aurora-r4/CT3682798
 

Ballistix Tactical 8GB DDR3-1600 UDIMM

Upgrade for: Alienware AURORA-R4
Crucial part number: CT3682798
Brand: Ballistix
Form Factor: UDIMM
Total Capacity: 8GB
Warranty: Limited Lifetime
Specs: DDR3 PC3-12800 • 8-8-8-24 • Unbuffered • NON-ECC • DDR3-1600 • 1.5V • 1024Meg x 64 •
Series: Ballistix Tactical
 

Read other 4 answers
RELEVANCY SCORE 82

Does anyone have the manual for the W530 as I need to look at replacing the motherboard as the GPU has failed and cannot be replaced on it's own? Thanks.
 
 
Moderator comment: New post created. Subject edited. Was: Re: Replacing motherboard myself - OR - Repair motherboard













Solved!

Go to Solution.

A:W530 - manual; mother board replacement; GPU failure

Sparky5 wrote:
Does anyone have the manual for the W530 as I need to look at replacing the motherboard as the GPU has failed and cannot be replaced on it's own? Thanks.

Welcome to the forum!
 
GPU is soldered, meaning your're right about needing to swap the complete motherboard. You can download the HMM (Hardware Maintenance Manual) from here: click me!
 
Good luck with the swap! 
 
-
 

Read other 1 answers
RELEVANCY SCORE 80.8

Hi friends,
I have windows xp sp2 on 80gb harddisk , mother board mercury make,intel processor now this mercury mother borad what i have donot support ddr2 RAM, i had moved harddisk to intel motherboard box.

i am able to detect harddisk and windows apologies to start safe , last good menu and start normally and command prompt appears, i tried all options but fail to start windows xp.

MY IDEA IS AFTER LOGGING INTO WINDOWS , LOAD INTEL MOTHER BOARD DRIVERS.
Pl. find me solution to loginto windows and resume work.
THANK YOU

Regards
Vinod

A:moved windows xp sp2 harddisk from mercury mother board to intel mother board

welcome
you cant use the same xp on another motherboard.

Read other 2 answers
RELEVANCY SCORE 67.6

my hp mother board lights up the green light on the board but it doesnot power on

Read other answers
RELEVANCY SCORE 60.4

I have a defective computer with a busted cpu (Athlon, 'forgot the speed). I like to replace it with Athlon XP2000 or higher. My mother board is ECS K7VZA rev. 1.0. Will the Athlon XP2000 or higher work on my mobo. Help please.
 

A:ECS mother board

Read other 8 answers
RELEVANCY SCORE 60.4

Hi, i need to know how much RAM my mother board can take, it has 2 slots.. but i was thinkking i would get 2 x 1 GB stickas of ram.. i was wondering if it would take that much..

Info:

 

A:My mother board..

http://www.atozincomputer.com/catalog/gigabyte_k8vm800___amd_athlon_64_motherboard_and_cpu_combo_4467394.htm said:



MEMORY
Supports up to 2 GB DDR 400/333/266 Modules via (2) 184-pin DIMM slots.Click to expand...

I think thats your mobo there.. just double check by going to the link i gave..
Make sure you have matched pairs of ram to ensure max compatibility..
 

Read other 4 answers
RELEVANCY SCORE 60.4

I was wondering if anyone has any tips on where to get parts to fix/replace a mother board for not too much money? I was informed yesterday that my mother board was shot on my year old gateway laptop. My husband is pretty good with computers and has built our desktops that we've had but he's currently deployed so I have to wait until he returns to fix or attempt to fix my laptop. I live in CT but am more than willing to order parts online. Thank you.
 

A:New Mother Board?

Read other 8 answers
RELEVANCY SCORE 60.4

well don't now if anybody can help but ill give it a go.
bought packard bell 5077 (imedia) last year for my wife working ok very good spec, but was getting board of the case (tower) so bought new case & swopped everything over ok all works fine apart from have no idea how to wire up the the top usb2 ports, yes it had them before but were all multi block conections now its loads of single wires HELP HELP. the only thing i can get from the net is the mother board is a columbia4?????? but cant get the full wiring diagram. any help would be nice CHEERS..
 

Read other answers
RELEVANCY SCORE 60.4

My son's computer was running a little slow. Then when he went to turn it on, it would boot up, but would let him past the start up screen. Kept asking for password. I took it to my computer guy. he checked, said he couldn't find anything wrong. He wiped it out and reinstalled. He said he did this two times. Then he calls me and says he needed to try something else. Calls me back next day, says its my mother board. No good. Called him yesterday, said that it wasn't ready, needed to reinstall everything. This is now the 4th time he is reinstalling. Called today, said it's not ready, taking long time to reinstall everything. Told me I could probably pick up a new computer for about 400.00. I told him to just reinstall everything. Told me he was trying, but said that he may not be able to. Can anyone shed some light as to what is going on. I don't trust him all of a sudden. Why reinstall 4 times. Any suggestions what it could be, or what's going on.
 

A:Is It my mother board?????

Sure sounds fishy to me. If you can get it back maybe someone on the forum can assisst you to get it up and going.
 

Read other 1 answers
RELEVANCY SCORE 60.4

Hi,

Here i have an P-III mother board but in that i does not have on board speaker and also if try to connect external speaker there is no connector for connect that ex. speaker. So how to i check the RAM slots in that board is workin or not.

Kindly help me.
 

A:Mother Board

Read other 9 answers
RELEVANCY SCORE 60.4

i am using a intel m/b model d845gl va with the o\s winxp pro service pack 2
can anyone help me with the insruction to bring the bios menu up i am not going to touch it i just would like to no if any technically minded person needed to.tia.col.
 

A:mother board.?

Your MoBo uses an amibios, you can enter setup by tapping either Del, F1 or F2 keys on POST or during boot logo.
 

Read other 2 answers
RELEVANCY SCORE 60.4

This is the firt time I have used a forum so I hope I am doing this correctly. I am still new with computers and I installed my first new motherboard today. Every thing went good but I hooked the on off switch wires incorrectly. I think I got it on two + posts. Needless to say I did let some smoke out of the switch box. I have since corrected this but now the computer will not boot up. Did I fry the new motherboard? Any help I can get would greatly be appriciated.
Paul

Read other answers
RELEVANCY SCORE 60.4

well i live in iran and my graphic chipset is not working right and they said i have to but a new mother board.so im looking everywhere and i cant find a place to order my mother boardwhere can i order this model's mother board?!model : 15-q178caproduct: G6R93UA#ABL

A:mother board

This is the motherboard: For use only on computer models equipped with an Intel Core i7-4702HQ processor, a graphics subsystem with discrete memory, and the Windows 8 Professional Standard system 765736-501 This one would also work: For use only on computer models equipped with an Intel Core i7-4722HQ processor, a graphics subsystem with discrete memory, and the Windows 8 Standard system 801521-501 HP does not have either part in stock.  You are not going to like the price but here is one on eBay shipped from China and it appears they will ship to Iran http://www.ebay.com/itm/For-HP-ENVY-15-Q-765736-501-Laptop-Motherboard-850M-4GB-i7-4702HQ-HM87-Test-... If this is "the Answer" please click "Accept as Solution" to help others find it.   

Read other 2 answers
RELEVANCY SCORE 60.4

I want to unplug everything from the existing mother board, remove it, and slide in a new mother board, reconnect everything, boot from the Win XP CD, do a repair and take off running without having to re-install all the application programs.
Will this work, or do I have do do a completely new install of XP and reinstall all the applications?
 

A:New Mother Board

Read other 8 answers
RELEVANCY SCORE 60.4

hello every one .I am hopeing you might be able to help me .I have a 14 month old computer what decided to stop working what i mean is it just said my mouse and keybord could not be loaded and it seemed to be stuck on a black screen before my windows xp, also i noticed the clock at the bottom was losing time .a few days before hand any way i turned to a shop and they said i needed a new mother board as the old one had lost its drivers and no new ones could be loaded . They have fitted a new mother board but now it seems my instalation discs what the original computer supplier supplied do not work so i cannot reformat my hard drive . please leave an easy to under stand note here if you can help me as i am not a bright person when it comes to this thankyou

A:My New Mother Board

You can use your Windows op system to reformat your hard drive, but then you would need to reinstall the operating system and you stated you do not have the disk.

What exactly are you trying to do? Why do you feel you need to reformat the drive?

Read other 4 answers
RELEVANCY SCORE 60.4

One problem that has me perplexed . When a customers motherboard goes down , it means reformatting and re-installing XP. Of course all my customer info is gone. If you try to boot up With the new motherboard XP will not load. It launches a critical error and says the boot sector has a virus. I know that XP has this built in to prevent it from being installed on several different computers . This anti-piracy is based upon motherboards bios.

I will not build a computer with pirated software but when the legal owner of the PC and the software needs his computer fixed he should not have to lose all his info. This is when I miss 98 , ME. Under those most computers it was replace motherboard and after several reboots you were all ready to go with all your data intact.

has anybody come up with a work around for this ?

A:When Mother board goes w/XP

What kind of computer are we talking about? According to MS, if you get an OEM motherboard from the manufacturer, with SLP (System-Locked Preinstall) in the BIOS, that's all you need. They don't mention any re-install. Maybe you can sort it out from This Page Is it possible to do a repair install and save the data?

Read other 2 answers
RELEVANCY SCORE 60.4

i have a dell dem 8100 and it has a planar mobo it is a 5e692 i need to know if it is an atx or what it is i am going to buy a new case and need to know please help me out i am new to this stuff
 

A:need help with my mother board

It should be an ATX form factor. I have an 8300 and it's a standard ATX mobo. The only thing you need to be careful of is that there isn't anything proprietary like the front panel connections or power supply connections. Sometimes they use things that are not standard.
 

Read other 2 answers
RELEVANCY SCORE 60.4

Hello,
I am wanting to get a new mother board, to use with the AMD XP 1700 or greater processor. I am wanting to sue RDRam. However all I see is DDRAM boards. Is DD and RD Ram the same thing??? If a mother board supports DDRam will it also support RDRam???
Is there any reomendation for a mother board that will use RDRam and the AMD chip???

Thanks,

Bear
 

A:Mother Board

Currently, there are no motherboards or chipsets that support RDRAM with AMD processors. It could be a possiblity in the future.

RDRAM and DDR RAM are not at all the same thing. They are two different types of memory. None of the memory types are interchangeable. A particular memory slot can only accept one type of memory. Some motherboards support two different types of memory, but they have separate slots for each type, and you can only use memory sticks of one type. You cannot use both types at one time.
 

Read other 1 answers
RELEVANCY SCORE 60.4

My computer i have rightnow is a HP T6212 and its around 7 years old at its to the point were it cant do anything right with out random performance drops so were going to get either a new computer or build on. Ive told my mother that building would save atleast 100 dollar. Now my problem is i need a mother board that can take 4 GB of ram (DDR SDRAM) and we dont need more then 125gb memory, the computer we hae right now has 145gb, and only 30gb are used :/ so i think we an save money froom haveing les mem. I plan on playing Mabinoig, combat arms, Dragons nest,Vindictus,mincraft, and my sister plans on playing Sims 3, all of this on my computer, and being able to record videos like minecraft. on top of that the normal flash games. this is like 10-15 mb of space, not much so alota space isnt needed, but a fast enough mother board is needed.
Also what is a good enough graphics card to play these games, they arent high end graphics and i dont need high end either. so yeah name em please and make em cheap
 

A:Mother board

Additional Details

Some where around 400-600 dollars and i only want a hard drive with around 120 gb and ii ment 4 ram slots i will be playing games that are like bf2 level of graphics and things. i have a case for the computer but i need a new mother boards and a decient graphics card. the power supply i have is stock so a cheap but decient power suplly would be nice.
 

Read other 2 answers
RELEVANCY SCORE 60.4

TENGO UNA NOTEBOOK HP ENVY ALUMINIO, 17T-J100, 18Gh ram, 2 discos duros. debo reemplazar la placa base, la pregunta al momento de solicitarla con estas caracteristicas lo puedo hacer o existe alguna otra a considerar: Mod. 17t-j100. serial: 5CG5111GZJ. n| MOTHERBOARD: SPS: 720265-501. CT 1541. TAMBIEN DONDE LA PODRIA ADQUIRIR

A:Mother board

Ingles, por favor

Read other 1 answers
RELEVANCY SCORE 60.4

How can I find out what mother board I have?

--maxim
 

A:Mother board

You can download sisoftsandra from http://www.tweakfiles.com It will identify some motherboards or else the hard way. Look at it and find the manufacturers make and model or the fcc number. The fcc number is generally located right around the dimm slots.

or you can try ctbios, it will read the bios rom's and report what is there. http://www.windrivers.com/identity/mboard/biosid.htm

 

Read other 1 answers
RELEVANCY SCORE 60.4

I had my daughter's computer fan fixed and I told them not to erase anything but the computer has been reset. Is there anyway to retrieve information from the mother board that we need?

Read other answers
RELEVANCY SCORE 60.4

hello my main board is dead finish finito, OK now i wont to bay new mother board, can i bay any mother board or it has to be a specific one or as same as the old 1. I rely do not know the maker of my mother board all i know is that it has Pentium 4 in it. When i go to bay new mother board what info do i hawe to bring with me about my computer or can i just bring my old mother board with me and say to the computer guy at the store give me the same 1 or closest to.

1) Can i use old Pentium 4 and put in to new mother board or do i have to bay new chip

2) Can use same memory sticks from my old mother board an use it in my new mother board which it might not be the same model.

PS

What would be the price of the mother boards i realy do not need anything expensive
 

A:Mother Board

Well, all u need is a "p4" mobo, becuase all have the same procesor socket. U need 2 mind out whether u have ddr dual ddr or sdram. The easiest thing is, as u said 2 take the mobo 2 the comp guy, and ask him about momory.
 

Read other 3 answers
RELEVANCY SCORE 60.4

Hi,
I have a pentium III system with ASUS CULS2 motherboard and it's running on xp pro. I'm wondering how much hard drive capacity it can keep up with. I tried it with up to 230 GB and it worked and in a while i'm going up to 320GB and wonder whether the mother board will support it. And also i'm wondering how to update the BIOS in case if I have to do that. Should I have to backup the old BIOS before it and where can find the new version? I'm really looking for your help.
Thanks
 

A:mother board help

Should work fine. You'll have to partition the drive.
 

Read other 2 answers
RELEVANCY SCORE 60.4

so ive been having a problem with my computer upon startup it loads boot menu and goes to windows vista loading screen but tends to stay at it forever resulting in my holding down my power button till it shuts off then trying again, but anyways ive been having to do that alot lately and sometimes i gotta go to system repair.sometimes i can actually get onto my computer but then after running a game it Freezes or Shuts off wich is not normal, its not a bad comp. now for some reason when i try to boot my comp it wont even display anything but it still does run??? please help this is very frustrating, im pretty sure that my hard drive went but im not sure if anything else did aswell with it. Also is there a way i can checl to see if the hard drive still works by putting it in a diff comp? cuz i need to backup alot of files on it. Thanks!
 

Read other answers
RELEVANCY SCORE 60.4

I am tryin to build new computer and have bought a AMD athlon XP 2700,
MSI K7N2 Delta mother board New Midi tower case 256DDR ram new WD80Gig HD and my 128Gig AGP video card also have transfered my exisiting DVD cd rom and CD/RW cd rom into the case also my old 20Gig HD which has Win ME on it which is set to master and the new one is set to slave and is formatted and partioned my problem lies here in when i turn the computer on it doesnt beep and just hang i have checked all the jumper settings for the board and have also cleared the bios in hope of it starting now this is the hard part this is the second motherboard i have had the first did the same so sent it back and this replacement one does the same *nothing* it just doesnt want to go into the bios all leads have been checked and triple checked any ideas and help would be grateful
 

A:Mother Board Help

Read other 6 answers
RELEVANCY SCORE 60.4

hellomy HP  ENvy  17        17-j184na iam told by engineers needs new mother which no longer exsists for this machine im told so has to be a refurbished one at 169.99    does this seem reasonable for refurbished ..are new no longer made for an under 2year machine ut has already been fitted but they cant reinstall windows,,they say when it was refurbished it been completly wiped of codes which would have been put there by HP when made is this true hope for advuse please regrds david

A:mother board

Where do you live? In the UK? Use the HP PartSurfer to find the compatible motherboard part number. Input the notebook's serial number in PartSurfer. Search online for a  new replacement HP PartSurferhttp://partsurfer.hp.com/

Read other 1 answers
RELEVANCY SCORE 60.4

Have a Question... after replacing a motherboard if you forget to put thermo paste on the processor and it over heat will I have to also replace the motherboard and the processor this time.
 

A:Bad mother board

Read other 9 answers
RELEVANCY SCORE 60.4

Have an E Machine PC it is not booting up, so, I open up the computer. I saw the CPU fan was not running and the processor was hot. I went out purchase used CPU Celeron, the computer is doing the same thing and not booting up. Do you think the CPU and the mother board is bad. The power supply is good, the fan in power supply is working. I also used a power supply tester.
Thanks!
 

A:cpu and the mother board

Was your old CPU a Celeron as well? Same speed?

You may want use the Clear CMOS jumper to clear the BIOS settings or you can pull out the CMOS battery for a few minutes.

Try reseating the RAM and video card as well. Or try a known good piece of RAM and a good video card. You can disconnect all the drives and remove any unneccessary PCI cards like a modem.
 

Read other 2 answers
RELEVANCY SCORE 60.4

ok like the subject said i need one about in that range. im building a computer as u can tell right now i have (i should of gotten the mother board as one of the first things ) a 512mb sdram card a radeon 9000 pro 128 agp graphics card a 48x12x48 burner a 52x cd romdrive a 350 watt antec power supply and a antec case that 8.1" (W) x 20.6" (H) x 18.6" (D) and i plan on having a pentium 4 proccesser at 2.4 ghz and a 40 gig hard drive so if u could tell me where i could get a motherboard that would suit that computer please tell me where i can get it!!
 

A:need mother board from 80$-110$

Read other 16 answers
RELEVANCY SCORE 60.4

Is it possible to change mother boards without losing my installation of XP?
 

A:New mother board

Read other 7 answers
RELEVANCY SCORE 60.4

I currently have a "soyo" P41875P mother board (two gig memory) in my computer. I need to upgrade for "speed", "memory", and now that soyo is out of business, I need a reliable supplier who is going to be around for a while for upgrades to the BIOS. What is the latest in motherboards for all the above, with 4 gig of memory? I think I have a "baby at" motherboard. I have antec "file server" which is bigger then a standard computer box. I have 5 fans in it, to keep it cool, one is on the supply, two in front, and two in the rear of the box. I need all the extras like a few extra bus 2.0, and firewire connector 1394. Dual core, I guess, Thanks I've tried everything to make this go faster. The only thing I have in the start up is my AVG free. That's what takes the longest to load at boot up. I don't know if windows 7 (windows 8 due out 2011) will make it faster. Thanks
 

A:New Mother Board

Read other 11 answers
RELEVANCY SCORE 60.4

Do you think this mother board is ok and good quality etc. And will be ok for this.
Socket-A SOLTEK SL-75DRV5 VIA KT333 Chipset ATA-133 AC97Sound DDR Memory Supported $169
http://www1.soltek.com.tw/English/home/01.htm

AMD ATHLON/PALOMINO XP1900 (1.6ghz) Socket A (Athlon not palimnio

SOCKET A / 370 ThermalTake Volcano 7+ THERMAL SPEED CONTROL Copper AMD 1.5gig

DDR-DIMM 256meg KINGSTON DDR266 (PC2100) DDR-DIMM 256meg KINGSTON DDR266 (PC2100)

CD Burner IDE 24x10x40x ASUS with recording Software Model CRW-2410A

DVD-CD-ROM IDE 16x DVD SONY OEM Model DDU1621
SeaGate 80 gig 7200rpm Barracuda IV ATA-100

GeForce4 TI4200 X-MICRO 64meg DDR Ram TV OUT Games pack
Internal PCI 56.6/V90 WEB Excel ESS Chipset

Keyboard & Mouse KIT MICROSOFT Hardware Value Pack Ergonomic Keyboard & Intellimouse

Undecided on speakaz

Midi-Tower A-Open ATX 300watt Model H600A P4 Ready USB PORTS FULLY OPTIONED

Sony Floppy Drive
Second hand monitor 15+

Also will it be easy to overclock cpu do any of u have expeirience witht this brand etc.
Thnakyou in advance,
Esky
 

A:Mother board?

you wont like that monitor , I got one .
 

Read other 1 answers
RELEVANCY SCORE 60.4

which specification of a mother board will show that it has a 20 pin or 24 pin power socket
 

A:mother board

Power supply:
http://www.atxpowersupplies.com/

Converters are available for 20-to-24 and 24-to-20.
 

Read other 2 answers
RELEVANCY SCORE 60.4

System specs are Pentium 4, 1gb ram, Asus P4R800-VM motherboard.

Problem is I'm pretty sure the ram is dead or very slowly dying, constant program crashes, different stop errors such as 0x0000000a and 0x0000008e (win32k.sys).

Things I have tried are swapping RAM to different memory slots, cleaning the RAM, changing win32k.sys to win32k.old. Tested RAM with MemTest. The latter threw up about 8 errors in less than 5 minutes. Doing a little bit more searching around I'm wondering if its the motherboard that is failing. I have tested the hard drive, its fine no problems there. I have also done a fresh install of xp with sp2, and still having the same issues.

I have tried to create a disc with the microsoft windows memory diagnostic tool, I can't burn the iso every program throws up errors (burn at once tells me the iso is too small). Have tried extracting the files and burning to a blank cd, set boot option to my cd drive but it just wont work.

Are there any other diagnostic tools etc, that I can use to determine if its the memory slots failing of the RAM. The ram is DDR400 RAM 2 512 sticks, I have other ram but its PC2100 I did try testing with this but the computer wouldn't boot up with the PC2100. I would try putting the DDR400 on the other motherboard but that one wont support the DDR400.

What should I try next? At the moment I can't use any programs without having crashes or having to restart the computer. I'm not to keen on the idea of... Read more

A:Mother board or RAM?

Read other 6 answers
RELEVANCY SCORE 60.4

Hi all, my girls laptop is broken, when ever she try to turn on laptop it's like black screen but you can hear that laptop is on. I went to 5 places where they fixing laptops, all of them said MOTHER BOARD is died. How much would cost to change mother board? and where i could do it?

A:Mother board

@Dainiux2 Hello;Allow me to welcome you to the HP forums! You can use this link to get a list of part numbers for your PC:  http://support.hp.com/us-en/product/HP-Pavilion-dv6-6c00-Entertainment-Notebook-PC-series/5191856/mo... If the motherboard part number is listed you could try ordering it from HP. If HP no longer has it, you would have to do an online search using Google and the part number.Good Luck

Read other 1 answers