Over 1 million tech questions and answers.

Unable to configure ATA on new domain controllers

Q: Unable to configure ATA on new domain controllers

Hi All,
I am trying to configure ATA Lightweight gateway on additional domain controller. I am getting the error.
The Console, https://ata.domain.com, returned an error while attempting to register the gateway. For more details, please review the Center error logs.

I can open https://ata.domain.com from the DC without any issue and the Port required for the communication is open.
There is no error in Application or system logs on DC or ATA server.
Center error logs in ATA is also not pointing to any error.

Thank you for assistance.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Unable to configure ATA on new domain controllers

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 74

Hi everyone,
I'm unable to configure WinRM on a domain computer. I have a simple domain with

1) Windows server 2012
2) A client running Windows 7

If I try to run WinRM on the local Administrator, everything works fine, but if I switch to a domain user, than problems occured.

For example, if i run winrm quickconfig in powershell as the domain Administrator, then I get:

WinRM already is set up to receive requests on this machine.
WSManFault
    Message = WinRM cannot process the request. The following error occured while using Negotiate authentication: An unknown security error occurred.
 Possible causes are:
  -The user name or password specified are invalid.
  -Kerberos is used when no authentication method and no user name are specified.
  -Kerberos accepts domain user names, but not local user names.
  -The Service Principal Name (SPN) for the remote computer name and port does not exist.
  -The client and remote computers are in different domains and there is no trust between the two domains.
 After checking for the above issues, try the following:
  -Check the Event Viewer for events related to authentication.
  -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use
 HTTPS transport.
 Note that computers in the TrustedHosts list might not be authenticated.
   -For more information about WinRM configura... Read more

Read other answers
RELEVANCY SCORE 62

Hi Just installed the latest version of Windows 2003 for Small Business (Sp1)

I have installed this OS on a new Fujitsu PRIMERGY TX150 S4.

Now I want just to use this Server as a server on a Workgroup. But the OS insists that it should be the Domain Controller. And then it just shuts it self down. Below is a log from the event viewer. Is there a way around this or will I have to bow down to the might of Microsoft. Just don't really want to configure the entire Lan from workgroup to Domain
Event ID 1014
Source SBCore

This computer must be configured as a domain controller. It will be shut down in 30 minutes. To prevent this computer from shutting down, run Setup on the disk that you used to install the operating system to configure the computer as a domain controller.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
 

A:Domain Controllers - Can anyone help please

Read other 8 answers
RELEVANCY SCORE 62

We have a primary and secondary domain controller on our network. We use a windows 2000 exchange server as our primary controller and another server as our secondary controller. to start, the active directories are not the same, as they should be between the two servers. how do i fix that?

the other problem I am starting to have is that the Windows xp client machines can't find the domain after being rebooted. I end up having to rejoin the domain in order to get the client machines to log on. If the client logs off, without rebooting, logging back onto the domain is no problem. I think this has something to do with the clients trying to log onto the secondary controller for some reason, and since the active directories arent sync'd, its only causing more problems...can anyone shed some light on the subject? thanks.
 

A:Domain Controllers

Hey DVation, sounds like you need to force replication for Active Directory between your Primary and Secondary domain controllers. Only members of Domain Admins or Enterprise Admins groups can perform this function unless you have been delegated the appropropriate permissions.
Refer to the following link for details:
http://www.microsoft.com/technet/tr...2003/proddocs/entserver/dssite_force_repl.asp
***********
As far as your XP machines go, make sure that your DNS suffix for each PC is correct and that your IP, DNS, and Gateway addresses are correct. Windows 2000/XP use DNS for name resolution in an Active Directory environment. Also, is Active Directory running in Mixed Mode or Native Mode?
 

Read other 3 answers
RELEVANCY SCORE 62

I have quite a number of DC's and the configuration of port mirroring is something that we just cant take on.

I understand there is going to be a release of ATA where the port mirroring is not a requirement and an agent will take that role on the DC.

Anyone heard of this?

Read other answers
RELEVANCY SCORE 61.2

i configured a domain controller on my virtualbox and i want to connect another DC to it. the guest machine is windoms 8. the network adapter i used is NAT. first DC IP:192,168,5.2, Gateway: 192.168.5.1, Subnet mask:255.255.255.0 and DNS as the gateway IP. for the second domain controller, server IP: 192.168.5.3, gateway: 192.168.5.1 and DNS as the IP of the first DC..192.168.5.2......i dont know why they are not communicating with each other. The moment i run dcpromo on the second DC it comes up with an error message to check my DNS and the domain name...it comes with this error too, 0x000005B4_TIMEOUT.....CAN ANYONE HELP
 

Read other answers
RELEVANCY SCORE 61.2

greets,

I have an older 2000 server which is a domain controller, I can not for the life of me figure out how to demote the machine so i can rejoin it to a new domain. I do not need two domain controllers in this network.
any ideas on how to? i already tried start>run>dcpromo


I decided to post here since i didn't see a section for server 2000. thanks
 

A:problems with Domain controllers

Read other 7 answers
RELEVANCY SCORE 61.2

Unless i am missing something we cant "detect" a new domain controller added to a enviroment as this is a "regular" task , not sure if admin logging on to new server would trigger in a enviroment that have been running more than 30 days

But 
Adding Domain Controllers to sentisive groups
Listing Domain Controllers not monitored by ATA
List newly created/removed domain controllers

Would be a great feature for future versions

Read other answers
RELEVANCY SCORE 61.2

Hope this belongs here............

I have some questions regarding changing the hardware in my domain controller. Im basically rebuilding it with new Processor, RAM, Mobo, etc.
Its just a desktop computer running Windows Server 2003. I plan to keep all the names of the machine and IP/domain the same. Is there anything I need to lookout for by doing this? I dont want to lose my active directory and user accounts on the machines that rely on this domain controller. Can I just build the new server, set it up as a domain controller with all the same settings and the computers will be aable to log into the new controller with the same users?
 

A:Changing Domain Controllers

Read other 6 answers
RELEVANCY SCORE 61.2

I have only got 2 domain controllers on my network, the primary server deals with all my DNS, file charing etc, server2 is our proxy server but also doubles up as a backup domain controller.
The problem is server2 cannot update active directory from server1
i get the following message when trying to connect to server1 from server2
"The domain controller server1 was not validated because. The RPC server is unavailable"
I am also getting plenty of error events on both servers, the error i am getting on server1 is event 1645
"The Directory Service received a failure while trying to perform an authenticated RPC call to another Domain Controller. The failure is that the desired Service Principal Name (SPN) is not registered on the target server. The server being contacted is daa52d87-1d82-44f1-b032-a6930524e669._msdcs.isenterprisesintl.co.uk. The SPN being used is E3514235-4B06-11D1-AB04-00C04FC2DCD2/daa52d87-1d82-44f1-b032-a693[email protected]
Please verify that the names of the target server and domain are correct. Please also verify that the SPN is registered on the computer account object for the target server on the KDC servicing the request. If the target server has been recently promoted, it will be necessary for knowledge of this computer's identity to replicate to the KDC before this computer can be authenticated. "
I have looked this up on ms.com and found an article explaing a hotfix will fix this. All updates are installed, so it obvious... Read more

A:Domain controllers cant replicate

just been running a few more checks and have seen a descrepancy between the 2 servers
server1
Schema server = server1
Domain server = server1
PDC server = server1
RID server = server1
Infrastructure server = server1
server2
Schema server = server1
Domain server = server1
PDC server = server1
RID server = server1
Infrastructure server = server2 ---- ????

I have tried to change this setting on server2 in active directory operations masters, but it says
"The current domain controller is the operations master. To transfer the operations master role to another computer, you must first conenct to it"
But it wont let me connect to the other DC because it cant find the RPC server!!! argghh
is there another way to alter these settings?? anyone??
 

Read other 1 answers
RELEVANCY SCORE 61.2

Actually, I have 2 DC's 1 Threat Management Gateway, 1 Windows Server (Web Server), 1 Windows Storage Server, 2 Exchange servers and 1 Sharepoint Server and 2 Hyper-V servers. ALL Running Server 2008 R2

Should I be upgrading any of these to SP1?

A:Upgrade Domain Controllers to SP1 or not

Hello Abuttino,

I would recommend to wait until the "official" SP1 RTM is released by Microsoft sometime this first quarter of 2011. Afterwards, it should be available in Windows Update, and for download (standalone version) directly from Microsoft.

Hope this helps,
Shawn

Read other 2 answers
RELEVANCY SCORE 61.2

Hello,

I just swapped out domain controllers and am now having synchronizing issues. It is still looking for the old server that i just replaced and i cant make it look for the new one. Does anyone have any suggestions?

Thanks!!

Read other answers
RELEVANCY SCORE 60.4

Hi everybody,
after my last Implementation of ATA (one week ago) I got a strange "condition". It's an implementation with LWGW on all DCs (Server 2012 R2), no seperate gateway installation.
Everything worked like a charm, as always, just worked through the deployment guide. We get alerts on DNS Enums or suspitious AD requests. We see logons on different member servers and clients if we search for them. We see changes to security groups and
we even see if I create a new service on one of the DCs so I guess event forwarding works.
What we don't see: Any logons on the domain controllers. It doesn't matter if I rdp into one of the DCs or via console. If I search for one of the domain controllers and let ATA show the "profile page" of it, the timeline ist just empty. Tried
different DCs, different user accounts, even created new users and new domain admins. ATA doesn't recognize any logon on domain controllers.
I appreciate any hints.

Thanks!

Thanks, regards, tim

Read other answers
RELEVANCY SCORE 60.4

I was excited to see that the new ATA 1.6 has a Lightweight Gateway that no longer requires port mirroring by installing it directly on the Domain Controllers. This makes total sense to me and gives me confidence in this ATA team. We have VMWare
and the port mirroring was an issue.
However, we are not excited about the .NET requirement on the Domain Controllers. The installation does indicate it is needed for the setup, but does anyone know if we can uninstall the .NET component once the installation is complete? Any thoughts?
Thanks!
-Srvrgeek

Read other answers
RELEVANCY SCORE 60.4

At my work we have an active directory domain. In the root of this domain there are two domain controllers.

ie dc1.mywork.com, dc2.mywork.com

When users login, they always seem to get authenticated by dc2, as you can see the login script running from that server, and when we shut down dc2, no one can login.

(have not shut down dc2 for any length of time to see if dc1 will eventually "take over" the login duties)

Where can I specify which server provides authentication for the domain? Or can I be assured that dc1 will take over for dc2 when dc2 goes down?
 

Read other answers
RELEVANCY SCORE 60

I have over 400 domain controllers. The initial look at ATA seemed to require port mirroring on the DC's and that was just impossible. I was told an agent of some type on the DC's was coming. Is that an option now?

Read other answers
RELEVANCY SCORE 58.8

Can Microsoft please provide methodology for setting up Windows Event forwarding (Sender initiated) for a Domain Controller based on a Windows Server 2012 R2 Core installation? Unfortunately all of your documentation relies on using the local Event
Viewer GUI to set this up. Connecting Event Viewer from a full Server 2012 installation to a Core Installation loses this ability entirely. The only option I've tried to employ so far leverages an .xml file, but I am not sure it is working correctly.

Please note: this is for Windows Security Event ID 4776 ingestion.

Read other answers
RELEVANCY SCORE 58.8

I have the latest version of ATA - 1.9.7312.32791
I have deployed ATA Lightweight Gateway to many domain controllers throughout my organisation from exactly the same "Microsoft ATA Gateway setup.exe" with accompanying .json file in the same folder.

Nearly all the Domain Controllers have been Windows Server 2016 Core with a quiet install via command line.
The installation has worked perfectly with the exception of two domain controllers on the same physical subnet/site.
The installation error code in the log is:
Error [\[]TaskAwaiter[\]] System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IdentityModel.Tokens.SecurityTokenValidationException:
Failed to validate certificate thumbprint [\[]thumbprint=FC78E602AA1E8BF57CC2270E81788E5ADC511DF4[\]]

Seeing as every other installation worked fine, I suspect something must be blocking or interfering with the certificate being successfully negotiated back at the ATA centre
The likelyhood if being an error with the JSON file is extremely small as the failures occurred in the middle of the installation program, with successful implementations either side of the two that failed.

What can I get the network team to check regarding firewalls, network traffic or blocked ports?

Has anyone seen similar?

Thank you

Chris

Read other answers
RELEVANCY SCORE 58

After the 1.9 upgrade we got an Timeline event about Brute Force attacks.
When investigating and looking at Event Logs >Security I started to panic when noticing 4776 errors against user: "administrator" and the source workstation was always a domain controller.
This would happen every few seconds.  Stopping the ATA gateway service on the domain controllers stopped this behaviour.
Any ideas or recommendations?
Thanks
The computer attempted to validate the credentials for an account.

Authentication Package:    MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
Logon Account:    [email protected]
Source Workstation:    DC4
Error Code:    0xc0000064

Read other answers
RELEVANCY SCORE 58

I want to set all my domain controllers (DC and RDC) to pull time from time.windows.com. In order to achieve this I am planing to create a gp (Computer Configuration/Policies/Administrative Templates/System/Windows Time Service/Time Providers)and
link to Domain Controller OU.
My question is, is it the best thing to do, or is there any risk or best practices with respect to this.

Read other answers
RELEVANCY SCORE 58

I am attempting to lab up ATA 1.7.1, and am having a similar issue to the following ATA Forum thread: https://social.technet.microsoft.com/Forums/security/en-US/c817193a-9859-48fa-a208-eb644b17005b/service-on-lightweight-gateway-wont-start?forum=mata
Event viewer is showing that the service is attempting to restart, and the ATA logs are full of this error (occurs every 20 seconds):
2016-10-18 23:49:50.2983 856 5 00000000-0000-0000-0000-000000000000 Error [DirectoryServicesClient+<OnInitializeAsync>d__12] Microsoft.Tri.Infrastructure.ExtendedException: Domain controllers are not configured
at Microsoft.Tri.Gateway.Resolution.DirectoryServices.DirectoryServicesClient.<OnInitializeAsync>d__12.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Tri.Infrastructure.Framework.Module.<InitializeAsync>d__18.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Tri.Infrastructure.Framework.ModuleManager.<OnInitializeAsync>d__4.MoveNext()
--- End of stack trace from previous location whe... Read more

Read other answers
RELEVANCY SCORE 56.4

fns should read dns in title...
I am about to loose my website space which my internet provider supplied including my domaine name & the associated linking. I just cannot figure out how to setup another "supplier". Our phone company (Bell) decided to terminate that service. I have a site that gives me the linking from my domain name to my "real" email address. But with all the technical issues associated with the linking etc I'm lost! Is there somewhere I can go to learn the ins & outs of changing dns so my domain name gets linked correctly and ends up in my mailbox. The variables associated with this just blows my mind. I've used a domaine name for 20 years or more but never had to "mess" very much with it... Help please!
 

A:How to configure web site domain name linking & fns etc!

Yeah it can be tricky to setup email forwarding right. Have a look at FreeDNS - http://freedns.afraid.org/. That service may help you.

Also check out this article on how to use outlook.com to host your domain email
http://betanews.com/2013/08/26/how-to-use-outlook-com-as-a-free-custom-domain-email-host/

There's google apps, it used to be free, but now costs $5/mth, which still isn't too bad
https://www.google.com/intx/en_au/work/apps/business/pricing.html

And just doing a quick google, I found this site which has some more suggestions.
http://web.appstorm.net/roundups/em...aces-to-host-your-email-with-your-own-domain/

Hope that helps.
 

Read other 1 answers
RELEVANCY SCORE 55.2

Hello everyone,

We are running into a somewhat peculiar issue that I have been unable to find any information about and I was hoping someone here could point me in the right direction.



Several of our Windows 7 laptops (We're working on moving to W10) have become unable to change the password for a domain account from the Change a Password screen after hitting CTRL ALT DEL. Usually when someone would select to change their password,
it would take them to the text boxes with the domain\username pre-populated, I'm sure you are familiar.

Recently, when following the same steps, an account selection screen comes up with the option to use a smart card or simply type in the username. While we are working on implementing smart cards, they are not yet in use and in fact should not even
show any options for them yet. After opting to type in a user account, rather than populating the username field with domain\username, the field remains blank with grey text saying "provider\user name" instead. If the user types in their domain\username
and attempts to change the password, they get a generic error stating it is unable to change the password.



Users are still able to use a co-workers machine to change their password from the same screen by substituting the username. Most of the affected machines are from users that work in the same team, even though those same users can change their passwords
elsewhere just fine. It appears to be isolated to specific ... Read more

Read other answers
RELEVANCY SCORE 55.2

I would like to configure ATA to be in a work group and external to the monitored domain. Not having SEIM I plan to use ATA to collect the events using eventlog forwarding. In the documentation, it is mentioned that the domain controllers and ATA gateways
are connected to the same domain. So is my desired configuration of an ATA workgroup outside the domain not possible ?
thanks for any information


Read other answers
RELEVANCY SCORE 55.2

hi,

Is it possible to give the domain users the option of adjusting the settings of Modems using telephon.cpl in Control Panel themselves? Currently if a normal users runs Telephone and Modem Settings in Control Panel then under Modems the buttons are greyed out. How can I as admin activate those buttons for them so they can call the modem properties and adjust them for their own needs?

thanx

Edit: edit: I have already checked the User/Group Policies using mmc but have not found any option to activate them.
 

Read other answers
RELEVANCY SCORE 54.4

I come to you again seeking help. We have a problem with our logon and startup to our Windows 7 Enterprise system. We have more than 3000 Windows Desktops situated in roughly 20+ buildings around
campus. Almost every computer on campus has the problem that I will be describing. I have spent over two months peering over etl files from Windows Performance Analyzer (A great product) and hundreds of thousands of event logs. I come to you today humbled
that I could not figure this out. The problem as simply put our logon times are extremely long. An average first time logon is roughly 2-10 minutes depending on the software installed. All computers are Windows 7, the oldest computers being 5 years old. Startup
times on various computers range from good (1-2 minutes) to very bad (5-60). Our second time logons range from 30 seconds to 4 minutes. We have a gigabit connection between each computer on the network. We have 5 domain controllers which also double as our
DNS servers.
My original posts on:
Technet: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/e8400dbe-e6b8-4b1d-8851-a03e7af32e6e
Reddit: http://www.reddit.com/r/sysadmin/comments/w5f38/network_logon_issues_with_group_policy_and/
I followed a lot of what you all told me to do from testing the domain controllers with dcdiag and also completing netlogon tests. I did group policy tests where I got rid of the group policy
and just did default policy and it only slightly fixed the prob... Read more

A:Major Network Logon Issues (8 Domain Controllers and 3.5 thousand workstations) DNS, Time Server, DHCP, and Group Policy Errors

Hi,


I would like to suggest using Network Monitor to troubleshoot the issue.


Thanks.

Jeremy Wu
TechNet Community Support

Read other 4 answers
RELEVANCY SCORE 54

we have built a new 2003 domain for legacy and I need the users to be able to use their existing local profile on their XP machines when they added to the new domain, the users will have the same usernames carried across. What registry key should
I change to get this result?

Read other answers
RELEVANCY SCORE 49.6

When Win updates are downloaded, the computer will not configure them and reverts back.What can I do?
 
JN

A:Unable to Configure Win Updates

The cache update files could be damage delete the Windows update cache files.
Save all your open files and close all programs.
Open Command Prompt as a administrator.
Type Sc stop wuauserv press Enter key.
Type Rd  /q   /s  "C:\Windows\SoftwareDistribution" press Enter key.
Type Shutdown  /r  /t 1 press Enter key.
 
After computer restarts check and install available Windows updates.

Read other 1 answers
RELEVANCY SCORE 49.6

When I download Win updates, I am unable to configure the updates. How can this be corrected?
 
JN

Read other answers
RELEVANCY SCORE 48.8

I am unable to configure Windows Firewall and Security Center settings on a Windows XP SP2 operating systems. Windows Firewall is disabled. I cannot use the Windows Firewall tool in Control Panel to turn on Windows Firewall or to configure Windows Firewall settings on the Windows XP SP2 computer. When I try to configure Windows Firewall settings, some options are appear dimmed, and I receive the following message: "For your security, some settings are controlled by Group Policy."

In addition, my Internet Explorer default settings are not available.
Recently I removed trojan.cachecachekit and had made the assumption this problem was caused by the trojan. System Restore is not an option because in following the Symantec instructions to remove the trojan I reset the restore date. Can you please help me get my system back to its original configuration?

Thanks! Nica

A:Unable to Configure Windows Firewall

You may not have removed the trojan.cachecachekit completely. IMO I would follow the instructions here http://www.techsupportforum.com/showthread.php?t=15968. Also read this http://www.techsupportforum.com/showthread.php?t=59099.

Read other 6 answers
RELEVANCY SCORE 48.8

I have an Asus wireless WL-520GU that I have a wired connection to my PC. Why, because I am using the wireless only to allow access to my webradio.

Problem is the web radio connects 50% of time. Other times to connect I need to manually configure on webradio to connect to connect to wireless. It works sometimes other times not. I haven't been be to get to point of securing the SSID. So probalby someone is stealing my bandwith.

Now to explain my setup, my modem is connected to my Linksys 2102 adapter (used for VOIP) which to connected to the Lan port on the router.

I can surf the web on the PC, but trying to establish a connection, the PC does not recognize a wireless device. I cannot even access the Asus web interface (192.168.1.1)

My default gateway is 192.168.0.1 that of the Linksys adapter,

How to enable SSID so I can lock it and I can access the wireless problem-free from the web radio (Aluratek) ?
 

A:Unable to configure wireless router

Read other 16 answers
RELEVANCY SCORE 48.8

Gooday all. I have a laptop set up for my entertainment area. I am using an HDMI cord from laptop to a screen and using the sound output to a set of surround sound speakers. This a pretty cheap set up,nothing fancy. I am trying to get all the speakers recognized by my Realtek Sound Management application. The Lasptop (http://speccy.piriform.com/results/J...8QITBgvOYgX6Ol) is only recognizing a 2 speaker stereo set up. How am I able to change this so as to be able to adjust settings to the 6 speakers of the system. Thanks in advance.

A:Unable to configure speakers on Laptop.

Looking at the Speccy, I don't see anything other than RealTek HD Audio. If the laptop has a RealTek HD Audio Manager, have you tried setting the speaker type there?

Aside from the audio issue, I notice you only have 2GB of RAM. The 64 bit OS does you no good with only 2GB of RAM, and can be an issue with only the 2GB which is bare minimum for a 64 bit OS. The main reason for using a 64 bit OS is to use more than 4GB of RAM, since a 32 bit OS cannot address 4 GB (or more) of RAM.

Read other 2 answers
RELEVANCY SCORE 48.8

When I press F1 in Outlook 2010, it starts a Configure dialogue. It always fails, then says restart to complete, even though it says it rolled-back changes. I don't know why it is failing, nor where to look. Obviously, I can't get help within Outlook.

Thanks.

TSG SysInfo:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 8122 Mb
Graphics Card: NVIDIA GeForce 310M, 512 Mb
Hard Drives: C: Total - 597562 MB, Free - 350316 MB; F: Total - 1907695 MB, Free - 1084235 MB;
Motherboard: TOSHIBA, NWQAA
Antivirus: Kaspersky Anti-Virus, Disabled
 

A:Outlook 2010, Unable to Configure

Have you tried a repair install of outlook or uninstall then reinstall?
 

Read other 2 answers
RELEVANCY SCORE 48.8

I updated my Sprout Workspace to get the new 3D Capture application.  After installing I can now longer launch the app and I get the error message "Unable to configure Sprout for 3D Capture".   I did a complete reinstall of Windows 8.1 and went back to the original Sprout Workspace and 3D Capture and everything works fine.    Has anyone had this issue before and solved the problem?

A:Unable to configure Sprout for 3D Capture

I reverted to Sprout Workspace 1.04.4.3241 Rev B. Problem solved.  I went  to:  http://support.hp.com/us-en/drivers/selfservice/Sprout-by-HP/7471144/model/7471145#Z7_3054ICK0KGTE30... then paged down to software solutions and downloaded  and installed previous version 1.0.4.3241 Rev.B  (see the following )   

Read other 1 answers
RELEVANCY SCORE 48.8

Greeting to all. I have been anable to configure neither outlook nor thunderbird to download or send messages from my yahoomail address. each time a dialogue box comes up asking me for my password. or a message says failure to connect (or something like that) But with gmail things work well. Someone proposed that I use Ypops. I downloaded and installed it but the problem remained.
Thanks for any help
 

A:unable to configure outlook 2010

What kind of configurations you have there?
If you can update on that, would be helpful to rectify the problem.
 

Read other 3 answers
RELEVANCY SCORE 48.8

as you can see the properties button does not lit up and remains grey out although i click on IPV4, why is this happening? i was open it a few years ago

A:Unable to configure network properties

Have you done this? Change TCP/IP settings

Read other 9 answers
RELEVANCY SCORE 48.4

When I go to gameplay config controls, it only has the keyboard but when I toggle to any other devices it doesnt even have an option for my gamepad. But windows reconizes the gamepad just fine and it works fine. Just cant config it. Is it something with the game itself or the gamepad. Cause I dont know if I should return the pad or what. I have a MadCatz PC Con USB Controller
 

A:Unable to configure gamepad in Need for Speed Underground 2 - plz help!!!!

Read other 7 answers
RELEVANCY SCORE 48.4

Hello all.

My Dell Inspiron 3520 was going quite slow for unknown reasons so I decided to 'refresh' it using Windows advanced start-up setting. Since that time I have been unable to install Windows updates. Well, I can 'install' them, but they won't 'configure'. Once installed and 'configured' 100% I get this error message advising following reboot : "Failure to configure updates. Reverting changes". The laptop then stays paralysed on that screen.

This only started to happen AFTER I "refreshed" my laptop, which was running Windows 8.1 pretty-much problem-free, though a bit slowly, until a week ago. For now I have found a temporary 'fix' by disabling automatic updates; otherwise the laptop is constantly stuck on the "failure to configure updates" error page (because, obviously, it's automatically attempting to install updates). I have done all the standard troubleshooting, including running MS Fix It, Dell Dr ('My Dell' found no hardware issues), MS Malware removal and Mcafee anti-malware. All reported "no issues". I have been in command prompt and found no issues I even tried to 'refresh' the laptop again two more times. I have also spoken to two Windows "technicians" and allowed one of them to remotely access my laptop. He found no issues or "violations".

Obviously, the temporary 'fix' of turning off auto-updates isn't a long term solution, and 'refreshing' the laptop hasn't helped (it actual... Read more

A:Unable to 'configure' Windows updates since 'refreshing' l

Have you tried system restore to a good working spot
before format you can use reset factory settings
you can try this in safemode
http://download.microsoft.com/downlo...nostic.diagcab
give a boot from your DVD and give automatic repair a try

Read other 10 answers
RELEVANCY SCORE 48.4

Windows XP Home Ed. My Dell laptop computer loses this setting and I have to reset it each time I start the computer. It looks like this may be because the "Apply" button is dimmed in the Wirelss Zero Config. Properties Window so that I can only click "OK". Have any suggestions?
 

Read other answers
RELEVANCY SCORE 48.4

I constantlly get error_not_found 0x80070490 when trying to install updates.

The Microsoft website says its a CBS issue and that the resoloution is to run a repair installation of Vista. Thing is the software was pre-installed so i have no disc and i'm unsure how to run a restore without an OS disc and also without wiping everything accidentally.

HP say speak to Microsoft, Microsoft say speak to HP.

Any ideas how i fix this one before the PC flies out the window ?????

A:Unable to Configure / Install Vista Updates

Hi -

See if this tutorial helps --> http://www.vistax64.com/tutorials/88...all-vista.html

If no Vista recovery DVD, use the recovery partition - most systems = hit the F10 key during boot-up.

Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 48.4

Hi

When I am in Internet Options, Advanced Tab, when I click on an item, it will highlight, but can't click to enable or disable. I am using Mozilla as my primary browser, but don't know if this has any relevance! One
of the main reasons is that I keep on getting an error message from Java (please see log below):-

Additionally, I also receive errors such as FDGO.exe, NTDLL.dll etc etc. I have no idea what I am doing wrong, so would much appreciate all and any help possible!
JavaJava Plug-in 1.5.0_06
Using JRE version 1.5.0_06 Java HotSpot™ Client VM

----------------------------------------------------
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
----------------------------------------------------

Many thanks
Nat

A:Unable To (click) Configure Internet Connections

Uninstall your Java and any Java plug-ins, then reboot your computer. After that, go and try the same things again in your browser options. If everything works out fine, just reinstall your Java and any plugins you may want.

Read other 1 answers
RELEVANCY SCORE 48

After restoring my new laptop back to factory settings (to fix problem I was having with MSE), I find that I am now unable to configure my restore points. I am trying to increase the storage space so I can have several restore points. When I click 'Apply' or 'Okay' after changing the space allocation, the following error appears:

"The filename, directory name or volume label syntax is incorrect. Error 0x800707B"

The following drives appear in the Restore Config window with Restore set to 'On':

System_DRV
Windows7_OS(C:)(System)
Windows7_OS(C:)(Missing) -- this seems odd to me

For background info, I restored to factory settings and added MSE and then other programs one-by-one. After programs were re-installed, I restored my data from the previous night's backup. Everything is working fine and there are no system errors that I can see.

Would anyone have any insights on this problem?

A:Unable to configure restore points - Error 0x800707B

  
Quote: Originally Posted by hallydai


After restoring my new laptop back to factory settings (to fix problem I was having with MSE), I find that I am now unable to configure my restore points. I am trying to increase the storage space so I can have several restore points. When I click 'Apply' or 'Okay' after changing the space allocation, the following error appears:

"The filename, directory name or volume label syntax is incorrect. Error 0x800707B"

The following drives appear in the Restore Config window with Restore set to 'On':

System_DRV
Windows7_OS(C(System)
Windows7_OS(C(Missing) -- this seems odd to me

For background info, I restored to factory settings and added MSE and then other programs one-by-one. After programs were re-installed, I restored my data from the previous night's backup. Everything is working fine and there are no system errors that I can see.

Would anyone have any insights on this problem?


Turn off SR, you can read help to find out how.
Turn off computer
Boot up
Turn on SR
May not work, but it does 3 out of the 5 times the problem was on this board.

Read other 5 answers
RELEVANCY SCORE 48

Hi, I recently purchased a pair of Corsair Vengeance 2000 wireless USB headphones. However, when I installed them and tried to use them, I came across a rather unusual problem. I couldn't test them, or set them as default device, or configure them. It's like Windows doesn't recognise them. All the drivers are installed correctly .

I have also tried them on another computer, with the same version of Windows and they worked fine, so I know that there is no problem with the headphones.

I am running RealTek HD audio just incase it is needed.
Thanks

A:Unusual problem: No sound bar for headset and unable to configure them

Sounds like they could have a corrupt status in Windows. Connect the headphones then go to the Device Manager, either the headphones will be listed in the sounds and audio devices or there will be an unknown device listed in the USB section. In either case, RIGHT click on the entry and then LEFT click"Uninstall". Then disconnect the headset and restart the PC. After Windows starts, connect them and Windows should detect and install them, like a new installation. This may take care of the problem.

Read other 9 answers
RELEVANCY SCORE 48

Hello everyone,

I'm about at my wit's end trying to figure out my problem and finally decided I should ask the pros for help, since an exhaustive search of the interwebs has turned up nothing. I'm a hobby PC user so please be patient with me. So here is my problem.

I recently bought all the stuff to build an HTPC/gaming rig for my girlfriend and I and I wanted to set up RAID 1 but no matter what I try, I can't get it to work. Here is my rig.

ASRock H77 Pro4-M mobo
Intel i7-2600
(2) 2TB Seagate Barracuda 7200 rpm; 6.0GB/s HDD
(4) 2GB G.SKILL Ripjaws DDR 1600 RAM
EVGA GeForce GTX 550 Ti Video Card
Cooler Master 600W Silent Power supply

I think that's about it.

Here is what I've done.

I went into bios and set my storage configuration to RAID. After, I saved and exited, and allowed the machine to reboot. When it did, I pushed Ctrl + I to enter the RAID volume setup menu. I labeled the volume, chose RAID 1, selected my drives, selected my size, and saved and exited. Then I booted from my Windows 7 Home Premium 64 bit (Dell OEM, if that matters). I selected my regional settings, and when prompted, accepted the terms and selected "Custom" install. At the drive select screen, I saw one disk, which I believe is what I should see. I highlighted the drive and selected "Load Drivers." I used the driver labeled with the arrow in the attatched image. I got it from my mobo's website found here ASRock > Products > H77 Pro4-M. After the driver loaded, I re... Read more

A:Unable to configure RAID on Windows 7 Home Premium

Why do you want RAID? WIn7 doesn't much like RAID which isn't even Redundant so risks losing both HD's if one fails. Better to install to one HD and use the other for backing up an image.

If you saw one correctly-sized RAID array when you booted into the installer to try hardware RAID then the driver wasn't needed as it's only loaded when no drive shows up. Try again.

Read other 9 answers
RELEVANCY SCORE 48

Hi all my friend,
I have a (Air Access) - ZG-5000-11g Wireless Outdoor Bridge , Ap Router, It has hanging problem, so I make it factory default. but now I have unable to configure it. so plz some one help me to find out default ip address.. plz help me&#8230;
 

A:Solved: unable to configure router after factory reset

Read other 7 answers
RELEVANCY SCORE 48

I have an application running 24/7 which occasionally loses the ability to pause or configure it by right-clicking on the systray icon.
Is there an alternative method of doing this, or is a reboot the only answer?
(The programme is [email protected]).

Cheers

A:Unable To Configure A Running Appn From Systray Icon

I am not sure what your question is.Do you interact with this or is it a remotely controlled client allowing the use of your computer's unused processing power by the research group?If the program stalled, you may be able to look in the task manager (ctrl/alt/del), highlight the running ap by right clicking on it, choose "go to process" , then right click on the process which will be highlighted and choose "set priority". Try elevating the priority.I suggest you write down what you did so you can reverse it if necessary.There is also a Bulletin Board for this. They might have or be able to provide specific information on the ap:http://forum.folding-community.org/There's also a wiki that may help answering questions:http://fahwiki.net/index.php/How_tos

Read other 4 answers