Over 1 million tech questions and answers.

64-bit installation fails Error Code: 0x80070570

Q: 64-bit installation fails Error Code: 0x80070570

I used to run windows 8.1 x64 but I had to reformat because I thought that would've fixed my problems installing windows 10. When I tried to install windows 8.1 x64 again it failed and got the 0x80070570 error. I also tried windows 7 64bit and windows 10 64 bit but I got the same errors. 32-bit OS installs fine though. Of course all my attemptse were clean installs.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: 64-bit installation fails Error Code: 0x80070570

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 92

I am trying to install Windows 7 on an HP Slimline s5220y with a USB installer I made from a Windows 7 ISO (I made the ISO from a working Windows 7 DVD). At around 25% through extracting the files, I get an error message with the error code 0x80070570. Any help is appreciated

A:Windows 7 Installation Error code 0x80070570

Hello and welcome Cave mate I think personally although fiddly using this tutorial and invoking the ie.cfg removal tool would be far less problematical as long as you choose the correct version for which you have the activation code for.

Clean Reinstall - Factory OEM Windows 7 it does also give info on doing it with a stick anyhow.

Read other 5 answers
RELEVANCY SCORE 92
A:Error code: 0x80070570 during installation 7100 x86

As I have just posted on another thread put the iso back in utorrent and force a recheck. The same thing happened to me a couple of weeks ago and it turned out the iso was not complete. If it is complete try burning at slower speed.

Read other 4 answers
RELEVANCY SCORE 90

Guys i have this problem with my Toshiba laptop:
Several days ago my com crashed..when i started my computer on the very beginning on start up screen when it says windows is starting i get a 1second blue screen with some saying and my laptop restarts by it self.
So,ok i have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% i get this message Error Code:0x80070570
I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taked out 1 tried to install-same error,putted in another slot-same error,replaced and putted my other Ram Memory in the slots same again.
So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%???Could be something else causing that error code mentioned above??
Please someone respond and help me...THANK U IN ADVANCE

A:WINDOWS 7 Ultimate installation Error Code 0x80070570 problem!!!

Follow these steps exactly to Clean Reinstall - Factory OEM Windows 7.

Did Ultimate come with the laptop? Install only the licensed version using the Product Key on COA sticker.

Wipe the HD before install with Diskpart Clean Command

Read other 9 answers
RELEVANCY SCORE 78

Hi, trying to install alps tpad drivers to get multitouch on win7 x64 dell laptop. the installer tries to load "Microsoft .net 4 client profile" but it fails with error (from log)

"MSI (C:\3b228d38aff65874c154c648\netfx_Core_x64.msi) Installation failed. Msi Log: Microsoft .NET Framework 4 Client Profile Setup_20130915_191425624-MSI_netfx_Core_x64.msi.txt


Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:01:24)."

I have also tried to install latest .net4 downloaded from ms downloads, but get the same error.
The multitouch worked fine in win8 (which i hated) but this is a very clean install ( partitions removed and reformatted) of win7 ultimate, sp1 loaded. I updated as per ms instructions for all win7 updates it said i needed (not counting the Office ones i don't want). I've spent many hours now and any help would be appreciated.

A:.net 4 installation fails with error code: (0x80070643)

  
Quote: Originally Posted by mikep


Hi, trying to install alps tpad drivers to get multitouch on win7 x64 dell laptop. the installer tries to load "Microsoft .net 4 client profile" but it fails with error (from log)

"MSI (C:\3b228d38aff65874c154c648\netfx_Core_x64.msi) Installation failed. Msi Log: Microsoft .NET Framework 4 Client Profile Setup_20130915_191425624-MSI_netfx_Core_x64.msi.txt


Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:01:24)."

I have also tried to install latest .net4 downloaded from ms downloads, but get the same error.
The multitouch worked fine in win8 (which i hated) but this is a very clean install ( partitions removed and reformatted) of win7 ultimate, sp1 loaded. I updated as per ms instructions for all win7 updates it said i needed (not counting the Office ones i don't want). I've spent many hours now and any help would be appreciated.


Hi mikep,

Welcome to Seven forums.

Please make sure that you clean boot the system by following the steps below:

Troubleshoot Application Conflicts by Performing a Clean Startup

If aany firewall or antivirus installed then disable the same and check again. Please check these articles which would be helpful:

Error codes

I get error code 0x80070643 when installing .Net Framework 4.0 on - Microsoft Community

Kindly update your system s... Read more

Read other 9 answers
RELEVANCY SCORE 76.4

I've seen several entries regarding sp1 instalation errors, but none with this one: falat error c0000034 applying update operation
 
Machine is x64 (intel core i7), with 8gb mem
 
tried installing sp1 via windows update. there were three patches to install, one of them, sp1
 
did the two first, before, and then tried sp1.
 
It failed while rebooting (not remember the code, sorry), but i was able to do a system restore to pre-sp1.
 
them, got the full SP1 media from msdn, and did install it in offilne mode. Setup looked faster (of course?) and in reboot, this fatal error c0000034 appeared. But this time, no option for system restore.
 
if i try to enter in safe mode, i get stuck on driver loading (last loaded is classpnp.sys)
 
if i try to run, as seen in other threads, the sfc tool, i get a "there is a system repair pending which requires a boot to complete..." Of course, reboot just gets me to the 34 error.
 
As i cannot get to Windows, no InPlace setup is available...
 
So, i read about DISM could be used as a before-last resourt... How? I'm not sure what this error is, so i'm a bit lost about getting something out of DISM to correct it.
Any help?

A:Windows 7 Ultimate SP1 installation fails with error code c0000034

thiswoot,
Thank you for posting and wanting to help other users, but unfortunately, I had to delete your post. We have found that the steps in this post while allowing you to recover from the non-bootable state, leaves the machine in an unserviceable state, with SP1
partially installed.  There is not a known way to recover a machine from this state at this time, so we recommend that people follow the steps in the KB article which allow you recover the system with Windows SP1 installed successfully. So as not to leave
customers in state which is not serviceable, your post was removed.
 
KB article with steps to resolve the issue:
975484  Your computer may freeze or restart to a black screen that has a "0xc0000034" error message after you install Windows 7 Service Pack 1
 http://support.microsoft.com/default.aspx?scid=kb;EN-US;975484
 
We also have a blog post on the issue with more details of why the deleted steps should not be attempted:
http://blogs.technet.com/b/joscon/archive/2011/03/11/why-you-don-t-want-to-edit-your-pending-xml-to-resolve-0xc0000034-issues.aspx

Thanks
-Tony MannIT Pro Audience Manager for Web Forums

Read other answers
RELEVANCY SCORE 76.4

Installation of Microsoft Visual C++ 2008 fails everytime on my PC. It stops on the very first step (Runtime Pre-requisites). When I took a look at the error report, I found out that the error code was (Can you believe my luck!) 1603. It just means "Fatal Error during installation" (Or does it?).

After this, I tried to intall this software after uninstalling VC++ 2005 and deleting all of the related files too but it didn't work either. I gathered from the installation log that the installation just did diddly-squat at the very first step. Anyway, I am attaching the installation logs for analysis. Please help me!
 

A:Visual C++ installation fails with error code 1603 in Vista.

Bump.
 

Read other 1 answers
RELEVANCY SCORE 75.6

Following the Windows Update Posting Instructions I have met a difficulty in that I see the maximum zip file upload is limited to 8MB. My CBS.zip file is 27.2MB and I would appreciate advice of any steps I should take before proceeding further.

I have installed the System Update Readiness Tool and the installation of KB976932 fails with the display of error code: 8024200D.

A:Windows 7 Home Premium Installation SP1 Fails Error Code:8024200D

This image shows the contents and file sizes of my CBS folder
Attachment 268353

Read other 7 answers
RELEVANCY SCORE 75.6

I am working on a client's laptop, and have been unable to update to Service Pack 1. Stand-alone manual installer results in error 0x800f081e

I have also run the System Update Readiness Tool, and this is the most recent log:

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2016-12-23 17:24

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages
(f) CBS Registry Error 0x80070002 Package_for_KB2695962_SP1~31bf3856ad364e35~amd64~~6.1.1.0 failed to get Visibility

Checking Component Store

Summary:
Seconds executed: 531
Found 1 errors
CBS Registry Error Total count: 1

Read other answers
RELEVANCY SCORE 73.2

Get this error code 0x80070570
cant remove any programs or files
Windows 8.1
HP PC

Read other answers
RELEVANCY SCORE 73.2

first of all sorry for my bad English..

I have downloaded windows8 developerPreview-32bit-English (2.8 GB) successfully..
made a bootable USB and tried to install (fresh install).
when it comes to expanding files at 57% it gave error code:0x80070570 and tried again.
same error..
tried to install on VMWare, Virtual Box directly with ISO..
same error.
on the other system with different configuration..
and again same error..

so, i searched on google. only the solution there may be problem with ISO is to re-download ISO..
but my net speed is very very low (download sppeds upto 12 kbps).
i downloaded it 2.8 with great difficulties.. (took 5 days to download.)

i can't download it again..

is there any alternate solution like rebuilding the ISO with working files.
is it possible to know which files of ISO are corrupted and replace them with working files..

pls help...

A:error code : 0x80070570

Sorry, but your best bet is to redownload. good luck.

Read other 5 answers
RELEVANCY SCORE 73.2

I tried to update my son's laptop with the latest "Cumulative Update for Windows 10 Version 1607 (KB3213986)", but after downloading the update I got : Error code: (0x80070570). The same thing happened with the December Cumulative Update and I thought that Microsoft would fix this in the January update? Apparently not. At all other computers at home there was no problem with the update. Any solutions?
 

Read other answers
RELEVANCY SCORE 73.2

I keep getting the error code: 0x80070570, cannot locate file, installation will now be cancelled.  This is Windows 7 Home Premium-32 bit.  I'm trying to do a clean install. Please help.

A:Error Code:0x80070570

Hey,in my view, this kind of problem is probably caused by the culprits as follows: 1.memory installation issue : try to check the installed memory situation on you motherboard and fix it if it has come adrift. 2.driver confilt : update some unsuitable driver to the latest version.

Sometimes things happen that are just out of your control.

Read other 5 answers
RELEVANCY SCORE 73.2

Trying to install Windows 7 Pro and I keep getting the error code 0x80070570.
I have tried everything from removing ram, clearing BIOS, jumper configs, re-downloading the software, slow burn...etc...
Can someone help me please

A:How do I fix 0x80070570 error code??

Fill in your computer specs. Since it's a custom build, include the motherboard make and model.

Read other 5 answers
RELEVANCY SCORE 72.4

I keep getting error code 0x80070570
An unexpected error is keeping you from creating the folder. If you continue to receive this error,you can use the error code search to help with this problem

any suggestion to fix would be appreciated
Thanks
D

A:Need Some Help New To Windows 8 Error Code 0x80070570

When do you see this error message? Is it during install or while using Windows 8?

Read other 5 answers
RELEVANCY SCORE 72.4

I get the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have windows Vista Home edition and I am trying to install either Windows 7 Home premium. I have the requirements it takes to put windows 7 on a computer. You can post on this thread to help me or if you need to email me for some reason it is [email protected]
 

A:error code 0x80070570 When installing win 7

Read other 6 answers
RELEVANCY SCORE 72.4

Hi,

Hope someone can help me with this issue.

I am trying to install Windows 8 64 Bit on a HP 2530p laptop using a USB Flash Drive that I set up with DiskPart and copied OS files to - from DVD disc.
I first tried to install using a DVD disc in a external DVD RW I plugged into USB port of laptop - this laptop has no built-in optical drive.
I got the same error code with DVD disc that I get with USB Flash drive.
I formatted HD during beginning of install so there is no OS on laptop...

Windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570.

I ran a MemTest86 and did a HD Test from BIOS and both passed.

Any thoughts?

Thank you all

gregmy123

A:Win 8 64 Bit Install Error Code 0x80070570

I would rebuild your USB install drive, you might have ended up with some corrupted files. Was this computer shipped with Win 8? if not then you'll need to set up your USB to boot UEFI, IE is has to be formatted fat 32, then on boot up hit which ever key on your computer that brings up a boot menu select you UEFI USB drive
UEFI Bootable USB Flash Drive - Create in Windows
Upgrade Install to Windows 8 or Windows 8.1

However I would use RUFUS to create your install USB thumb drive

Read other 7 answers
RELEVANCY SCORE 72.4

Hello,

I recently built a rig (spec below) and originally installed windows 7.

I decided today I would install windows 8.1 as I get it for free from my university. I booted the installation disc in EFI mode, wiped the SSD and deleted all partitions. I let windows create the partitions it needs and proceeded to install.
The installation got up to 2% in expanding windows files and showed error:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code: 0x800070570.

I rebooted and tried again several times and the same thing happened whether I chose EFI cd boot or not.

I then reinstalled windows 7 without any issues, and downloaded an 8.1 pro disc image from mydigitallife. The installation got a little further into expanding windows files, but the same error came up again.

Ive been reading that it may be a memory issue so i'm the process of reinstalling windows 7 and running memtest86+, but I doubt this is the case as its a mew system and windows 7 has no trouble

If anyone can shed any more light on why I am having this problem I would be much appreciated

Regards.

System Spec:
Mobo: Asus P8 Z77-V LX2
CPU: Intel i7 2600k (no overclock)
RAM: Crucial 8GB DDR3 1600mhz (one module)
GPU: GeForce 650Ti

A:Error 0x80070570 during installation

See if this helps: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with

Read other 3 answers
RELEVANCY SCORE 72

I've seen a lot of threads about Error code: 0x80070570 here, but none of the solutions works for me.

I posted on /r/techsupport earlier today:

https://www.reddit.com/r/techsupport...boot_from_usb/

Where I had trouble getting into the windows installer. I managed to get the installer going, but now I am getting an error message during the installation:

https://gyazo.com/cc6818f7667da1c11a66f360a712a0d3
Error code: 0x80070570

This happened after I formatted my drives; during the installation. I've tried to take out my RAM 1 by 1, but with no luck.
Running Windows 7 Ultimate x64 on a self-built desktop computer. Installing Windows 7 Ultimate x64 with a Kingston USB-stick "burned" with Rufus. This is the ISO I am using:

Download Official ISO's of Windows 7, Windows 8.1 or Windows 10 legally and for free - TechFleece

I have no access to a different Windows computer, only a MacBook Pro Retina. Nor do I have a different USB-stick or drive, so solutions which no not require any of this is appreciated. I am not the most computer savvy guy either, so keeping it simple would be nice

Thanks in advance!

Read other answers
RELEVANCY SCORE 72

I'm new guys so bear with me.

Just built a new rig, specs are in my bio but long story short I'm trying to install w7 fresh onto a sshd from a usb. When it gets to 15% during expanding windows files it gives me the error code 0x80070570. so here's what I've done: ensured sata settings are set to ahci, used different ram in different slots on mobo, format hd in cmd with diskpart, made sure ram settings good in uefi, redownloaded Iso file and reran program to make usb drive bootable. Currently I'm using the clean all command in disk part and then going to try and partition the drive. Should I be partitioning for the ssd? Is there something else I'm missing with the hybrid drive? I've been working at this for about 2 days and could use some help. Thanks in advance

Read other answers
RELEVANCY SCORE 72

I am trying to install Windows 7 32-bit RC on a desktop PC. I have previously used this disk successfully to install the OS on a laptop.

I keep getting an error message to the effect thatWindows cannot install required files.
...
Error code: 0x80070570Initially I thought that this was due to a flaky DVD drive but I have now installed a different drive and am still getting the same message. I also tried a SATA DVD drive but it seems that the Windows 7 installation process didn't like (have drivers for) this interface

edit:I have previosuly managed to load Windows 7 64-bit RC on this PC but had some problems with stability so thought I would give the 32-bit version a go.

I notice that some people have got around this problem by burning the DVD at slow speeds and by using a USB drive to boot from; since I have successfully installed using this DVD, the former doesn't seem relevant and I don't have an 8GB USB drive available. I will try running MemTest86+ on the system on the off-chance.Any explanations / other suggestions . . . please . . . ?

ps - I have just downloaded a new copy of Windows 7 32-bit RC, burned it at 1x and have got the same unhelpful error message

A:Error code: 0x80070570 when attempting to install

Welcome surv1v0r.

Burn the iso again with imgburn @4x speed and try again!!

Good Luck

Read other 9 answers
RELEVANCY SCORE 71.2

If you just want the solution page down .. it's in this blue

New shiny windows 7 disk arrives. ...... doesn't want to install ...

keep getting error message 0x80070570 when Windows 7 is expanding files:






Quote:
Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.


Spend an hour googling .. people suggest RAM problems .. I know my RAM is good but spend an hour or two running MEMTEST ...

Then I see a lot of people reduced to trying to install from a USB key .... great .... borrow my neighbours 4GB Cruzer, follow instructions, ... and bork it in the process of not installing the OS.

So eventually I call Microsoft and speak to a very nice lady in India who runs me through a dozen or so workarounds for this .. I'm pressing control +F keys left, right and centre, taking out RAM sticks, disabling EVERYTHING in BIOS.

Always the same thing:






Quote:
Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.


So after maybe two hours on the phone with her she decided to report the issue to the second line team. I'm told they will call me back today as they don't work weekends (all this took place Friday up til now).

EASY SOLUTION:

I don't wait weekends for answers (nor do I usu... Read more

A:0x80070570 Error Code on install - One Easy Solution

thanks for telling them , they're flooded with all sorts of setup issues (most of which are resolved with hardware removal)

Read other 9 answers
RELEVANCY SCORE 71.2

I have installed Win 8.1 in some different way than normal. I have sysprepped Win 8.1 in VMware and then saved a image using Clonezilla. When I installed/copied this image to a new computer I removed admin account - before that I have created another admin account with another name. I have RAID array which is my D: partition and when I tried to download file using utorrent it gave me - error the disk is unreadable or corrupted. If i try to copy one file in D: it gives also same error with code 0x80070570.

Read other answers
RELEVANCY SCORE 70.4

windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570. This happens when im trying to do a clean install on a blank ssd - Samsung using windows 8 or windows 7 ultimate. My computer is an Avatar Pitbull gaming computer and you can find the specs here :

Newegg.com - Avatar AMD FX-Series 16GB DDR3 2TB HDD+120GB SSD HDD Capacity Desktop PC Windows 8 64-Bit Gaming PitBull

A:Windows cannot install required files. Error code: 0x80070570

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. (If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install.) Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. Your installer is questionable so if it fails after one more attempt, try another ISO burned with tool in link, then try flash stick method.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the... Read more

Read other 7 answers
RELEVANCY SCORE 70.4

For the last few days, the system BackUp on my external hard drive is getting failed with error code 0x80070570 after completing nearly 95%. The backup consists of system images and other folders that windows automatically choose. Even when trying to run backup without the system images, the backup fails. As per my findings, the 'AppData folder' in additional locations is creating the problem as removing it from backup settings does solve the problem. But this problem didn't exist a few days ago and while letting windows choose what to backup, brings back the problem. How to fix it?

A:Unable to complete System BackUp, Error Code 0x80070570

Hello UrAshish mate maybe it is worth running a test on that drive because that error code covers other issues that come up on a Google.

SeaTools for Windows | Seagate

Read other 3 answers
RELEVANCY SCORE 70.4

While i am installing Windows 7 Home Basic 64 Bit on my SONY VAIO VGN-NW350F laptop i am getting the following error .

Windows Cannot Install Required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570.

I am getting error at installing Windows level.....while Expanding Windows Files at 5% it struck.

Formatted total HDD and given new partitions, No use

I have tried with 3 Different Genuine Windows 7 Disks but getting same problem every time.

Please provide me workaround or good solution to fix the problem.

Thanks In Advance
Shankar
9986680858

A:Getting Error code: 0x80070570 while installing Windows 7 Home Premium

Work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 70

Hello,
I am working on a Dell Latitude D630 laptop. Intel Duo Core 2. Had Windows XP on it. Trying to install Windows 7 Ultimate (store bought). Tried to do a clean install. (Wouldn't let me upgrade from Win XP).

During installation, about 4 minutes into installation, I get the error
"Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570"

I tried another copy of Windows 7 Ultimate, which I know is good. Same error.

I swapped the CD / DVD drive, and still get the same error.

I ran Memtest x86 and am getting A LOT of errors with the memory.

Here are my questions:
1) Is the bad memory causing this error?
2) I found one memory slot, directly on the bottom middle of the laptop (2 screws to remove the cover). Where is the other memory located? It has 2 memory modules in it, and I can't find the other one!
3) Is there anything else that could be causing this error?

Thanks alot!

Ox

A:Windows 7 Ultimate Installation Error: 0x80070570... Bad Memory?

SOLVED! The memory was the problem. Also, the other memory module is underneath the keyboard.

Thanks!

Read other 1 answers
RELEVANCY SCORE 68.8

The light weight gateway is being installed on windows server 2008 R2 sp1 domain controller.
=== Verbose logging started: 10/30/2016  15:52:44  Build type: SHIP UNICODE 5.00.7601.00  Calling process: C:\Users\adintg\AppData\Local\Temp\{9D17F9BE-88D6-4AB6-A188-6008DA2407AA}\.be\Microsoft ATA Gateway Setup.exe
===

MSI (s) (20:B0) [15:52:49:364]: Executing op: ProductPublishClient(,,)
MSI (s) (20:B0) [15:52:49:380]: Executing op: SourceListRegisterLastUsed(SourceProduct={4632A5E2-B516-4D6A-824F-9B579B604A85},LastUsedSource=C:\ProgramData\Package Cache\{4632A5E2-B516-4D6A-824F-9B579B604A85}v1.7.5402.41928\)
MSI (s) (20:B0) [15:52:49:380]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (20:B0) [15:52:49:380]: Specifed source is already in a list.
MSI (s) (20:B0) [15:52:49:380]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (20:B0) [15:52:49:380]: Adding new sources is allowed.
MSI (s) (20:B0) [15:52:49:380]: Set LastUsedSource to: C:\ProgramData\Package Cache\{4632A5E2-B516-4D6A-824F-9B579B604A85}v1.7.5402.41928\.
MSI (s) (20:B0) [15:52:49:380]: Set LastUsedType to: n.
MSI (s) (20:B0) [15:52:49:380]: Set LastUsedIndex to: 1.
MSI (s) (20:B0) [15:52:49:380]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=55531884)
MSI (s) (20:B0) [15:52:49:380]: Doing action: RemoveExistingProducts
MSI (s) (20:B0) [15:52:49:380]: Note: 1: 2205 2:  3: ActionText 
Action ended 15:52:49: InstallExecute. Return value 1.... Read more

Read other answers
RELEVANCY SCORE 65.2

Hi there,

i'm actually trying to install the service pack 1 (kb976932) for windows 7 on my girlfriends machine but i won't let me.
I tried thorugh windows update and the standalone download version. Nothing works.
I run the 'System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [November 2013] ' succesfully but it won't helped me.

PS: It's a german version of windows 7.

Please can someone help me....

A:SP1 installation on Windows 7 fails (Code 8024200D)

Please follow the Windows Update Posting Instructions and post the requested data

Read other 9 answers
RELEVANCY SCORE 61.2

OS: Windows 8.1 Pro. fully patched and updated.
I have a user who connects to several systems which require JRE on the local pc. Java version 1.8.0_77 was installed and working correctly.  The user has been successfully logging into the different systems without issue until last Thursday.  When
attempting to log in to a system that she doesn't use very often, she is told that she cannot continue because that system requires java version 1.7.0_?? to 1.8.0_51 to run.  I installed 1.8.0_51 and she tried again.  she still got the same error,
so I uninstalled 1.8.0_77 and she tried again.  This time the interface told her that no version of Java was installed.  I verified that, indeed, Java was installed, had her reboot and try again.  Same error.  So then I uninstalled 1.8.0_51,
and verified that the registry was clean of Java references, rebooted her computer and tried to reinstall the current version, build 77.  THIS time, the installation started normally, but when the "downloading java" screen popped up (the one
with the small green bar that goes across as it downloads), the window went away after about a second or maybe two, and nothing else happened.  A look at Task manager indicated that no installation routines were running.  A look at Programs and Features
in the control panel showed no installation of Java.  Testing with IE showed that Java wasn't installed either.  A look at the event... Read more

Read other answers
RELEVANCY SCORE 59.6

During Windows backup, which wants to backup the 'C' drive and my games drive 'E' (for some reason), I get the following error message after the 'C' backup has completed but not the 'E':

'The backup operation that started at '‎2015‎-‎12‎-‎20T06:00:25.459859400Z' has failed with following error code '0x8078012D' (The operation failed due to a device error encountered with either the source or the destination. If the source or destination volume is on a disk, run CHKDSK /R on the source or destination volume, and then retry the operation.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.'

I ran CHKDSK \R and received several errors of the type: 'A disk read error occurred 0000185. The disk does not have enough space to replace bad clusters detected in file xxxxxx of name xxxxxx.'

My 'E' drive is 2TB with 205GB free. I really don't believe that the cluster(s) in error are bigger than 205G, but what do I know?

Anyone have experience with this problem?

Thanks.

Read other answers
RELEVANCY SCORE 59.6

Hi heroes,
I can't install win 7 on my brother's laptop. error 0x80070570, file missing or corrupted.
I've seek solution on the net but nothing seems to work.
Laptop decription: ACER Inspire 7250, AMD proc. 64bits,8 Go RAM, HDD 500 Go, 3 partitions : 1.PQSERVICE(OEM) with windows and drivers 2.System reserved 3.Principal
What I tried (I used 8Go USB card with windows usb download tool):
- format principal drive and install clean windows -> format ok, install failed at 4% code 0x80070570
- use (shift) + alt + F10 at startup to reset at factory default -> nothing happened
- download another iso of windows -> same error
- try another version of windows -> same error
- verify integrity of all memories -> errors found on the HDD clusters moved in quarantine -> same error
- plug the HDD on my desktop and try install windows -> same error
- format and delete all partitions on the HDD, except the RECOVERY OEM reserved and create new clear partition -> same problem
No more ideas... please help

A:Unable to install win 7 (code 0x80070570)

Try another flash stick or DVD using the ISO and tool to burn to disk/stick in Clean Reinstall - Factory OEM Windows 7 which steps will assure you get and keep a perfect install. Since Acer Recovery will not run after a Clean Reinstall to C, delete all partitions during the booted install.

If this fails work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums reporting back any failure by when it happened and any error or other behavior.

If these fail test your hard drive using the maker's HD Diagnostic extended CD scan, followed by another Disk Check run from installer's Command Line on the full disk partition you created.

Read other 7 answers
RELEVANCY SCORE 58.8

I am plague with Vista Business update to SP2 with the error Code 80070002
I have performed all the "Get help with this error" suggestions. The System Update Readiness Tool has run and completed with no problem and I have tried installing SP2 from the stand alone download

A:SP2 fails error Code 80070002

1.Try reset the whole WU in aggresssive mode How do I reset Windows Update components?
2.Try install SP2 standalone version in safe mode

Read other 7 answers
RELEVANCY SCORE 58

Hi
I been trying to install update KB950125 but it keeps failing with error code 80070020.

I've tried disabling all non MS services, disabling my McAfee security centre, downloading the individual file for a single install all no luck.

I've also tried in safe mode but the installer won't run at all then.

Once windows update actually said it was successfully installed but the history said it failed and it was still on the list to install.

Any help will be very much appreciated!!

Read other answers
RELEVANCY SCORE 58

Running Win 8.1 Pro 64bit and I have been trying for over 2 weeks to install KB3008923 - tried 8-10 times. Everything seems successful until the restart and then at 67% complete it bombs out and undoes everything. Have tried downloading and running manually (same results) and have tried the Windows Update Diagnostic Tool. The diagnostic tool finds several errors and says they are "fixed" but it lies. I can run the diagnostic several times - either restarting between times or not) and it still finds and "fixes" these same errors. And no luck getting 3008923 to take either before or after "fixes" and restart.
Error Code for the Update is 800F0922 and I've attempted fixes outlined for it including resizing the System Reserved Partition in case it was too small. Still no joy.
Running Norton Internet Security so don't know if it's got something locked out or not. I am logged in as an Administrator, so I assume that the Diagnostic and Updates run at sufficiently elevated privileges so I'm not sure where to go from here. Any help would be much appreciated.

After a week waiting for reply, I guess I'm the only one so afflicted, so guess I'll have to install an old system image, see if it'll update and start arguing with Microsoft about why I'm having to reinstall Microsoft Office 2013 (downloaded product) within a month of initial installation.

Read other answers
RELEVANCY SCORE 58

For about the past two months Windows update has failed to run. If I try to run it manually it just sits there spinning its wheels. It does not appear to end or produce an error code.
I have seen the message "could not check for updates automatically"
I've been to the MS site and downloaded both
MicrosoftFixit.wu.RNP.6329995410378136.2.1.Run.exe
and
WindowsUpdateDiagnostic.diagcab
and the third party
Repair-tool.exe by ParetolLogic
but none of these fix the problem.
Today I have run SURT as instructed and the output from sfc /scannow is attached.
Update is still refusing to do anything.

A:Windows 7 update fails. No error code

I see no attachments??

Read other 9 answers
RELEVANCY SCORE 58

Can this error code be corrected so that I can download Vista update KB937287?

A:Vista Fails With Error Code 800736cc

Hi, this might help you. I found it while searching google for your problem. http://forums.techarena.in/windows-update/674767.htmRegards,Adam

Read other 1 answers
RELEVANCY SCORE 58

Trying to upgrade an existing 1.6 ATA install to 1.7.  Get Error code: 0x80070643.
I have tried both from Windows Update and a standalone installer.  Same error both ways.  Not seeing anything in the logs other than the same error code.
Any ideas?
 

Read other answers
RELEVANCY SCORE 58

I m trying to enumerate the DFS namespace and folders hosted by the DFS server using NetDFSEnum API
But API call fails with error code  87 (ERROR_INVALID_PARAMETER)
It works only when i pass \\DFSserver\Namespace name as first argument to api call, It didn't works if i just pass the \\DFSserver name as first argument (it worked on few servers)
Could someone please advice why it didn't work 



 

Read other answers
RELEVANCY SCORE 58

After failing twice, I read and followed the directions MS posts for this error code: (1) download and extract subinacl.exe and (2) create/run as admin the reset.cmd batch file, as instructed. Reset.cmd ran as expected. Additional attempt to install update failed with the same error. I have hidden the update for now.

Note: The parameters of this error do not fit. I am Admin and logging in as such. Also logged in using super administrator account. Firewall is not obstructing. Updates are set correctly. Also, please do not bother suggesting running SFC.exe.

A:KB3023266 Fails with Error Code 80070005

The logs show the following problems...





Quote:
The following boot-start or system-start driver(s) failed to load:
StarRAM
ysyfer








Quote:
The Trend Micro Client/Server Security Agent service failed to start due to the following error:
The system cannot find the file specified.


DiskKeeper appears to be causing registry problems on shutdown

Without the logs, that's as far as I can go.

Read other 9 answers
RELEVANCY SCORE 58

Hello, My T470 is hanging when attempting to boot. It hangs on the "Lenovo" screen and  then eventually enters "Boot Menu". I ran the lenovo diagnostics and it threw an error code: START TESTS 20181124T213405UTC START STORAGE_READ_TEST 20181124T213410UTC STOP STORAGE_READ_TEST FAILED 5 S STOP TESTS UHD020020-UN7W0I --- STORAGE FINAL_EXECUTION  FINAL_RESULT_CODE U1THPBDV2-ZD1LE2 Does anyone know what this means? This is on an SSD. Any chance of data recovery? I have no idea where to find information on this error code and no idea how to contact lenovo for information/tech support (all contact pages just seem to be pointers to resources, these forums or order support).  My machine is out of warranty (standard 1 year, purchased ~1.5 years ago) but I did buy with amex with plan that it would cover me for an extra year. Does anyone have experience with this process? What information I would need to get to have amex cover the repairs.  Thanks!Ben

Read other answers
RELEVANCY SCORE 58

Hello,

Here's what I've tried so far.

1.)Attempted to install the update manually.
2.)I've ran an sfc /scannow. It told me that it repaired some corrupted files.
3.) Tried the contents of the Software Distribution folder.

At least one other computer on my network was able to install this update successfully. Any suggestions? Thanks.

Read other answers
RELEVANCY SCORE 58

On an Asus laptop with Windows 8 preinstalled, I have secure boot on, AV off, but every time I try to install the update from the Windows Store I get as far as:
Getting the update ready
This App wasn't installed, - view details.
Something happened and the Windows 8.1 couldn't be installed. Please try again. Error code 0x800703f9

I've tried installing with nearly every non-windows process disabled, but that doesn't help. I've Googled the error number, but although I found instances of it (back to Vista), I couldn't find what the error was or anything helpful.

A:8.1 Upgrade fails, Error Code 0x800703f9

I've also experienced this issue. I know that on my system I managed to partially break the Windows bootloader and I've assumed that's the source of the problem, having tried a lot of other potential resolutions that haven't worked. I've tried repairing the bootloader without success so I think it's going to take a "refresh" or reinstall to solve. I don't have time to do that at the moment though so I can't confirm that that will work (I may not do it in the near term anyway because I don't trust it not to nuke the dual booting Linux partition on the same disk... which is how I managed to damage my bootloader in the first place :P)

Read other 3 answers
RELEVANCY SCORE 57.6

Hello -

I used Windows Update to try the SP1 update, it updated all except the SP1 package. I tried to update and then turned off M Security Essentials, spent an hour looking for the version number, but have downloaded all W7 updates ever offered, so expect it is up to date. Scanned for the Essentials update, but not found on the MS download site.

I ran the W7 Update TroubleShooter, downloaded and ran the W7 Windows Updater system checker and checked the two logs generated, no errors or problems there.

Went into manual mode, went to the download site, pre-installed the 4826 update and downloaded the W7 SP1 file, same error message, 80070057.

No other malware or other programs running, it is a recent Sony Vaio laptop, 8 GB memory, no weirdness when monitoring install with Task Manager.

My other 4 computers updated SP1 with no problems.

Any ideas considered,

Michael Lowery
Colorado Springs, CO

A:W7 SP1 Installation fails on Error# 80070057

I installed SP-1 successfully with the following procedure:

1. Reinstalled Windows 7 ? rebooted
2. During re-install, software reported: Net Framework V. 4 needs to be repaired
3. Was repaired by install program, rebooted
4. Checked services.msc, found Windows Updater running
5. Ran 64 bit Software Update Readiness Tool ? rebooted
6. Ran 64 bit Windows SP-1 Standalone Installer ? rebooted
7. Restarted Windows Security Essentials

Evidently there is some setting in the registry or some minor corrupted file in the existing W7 installation that is not found by running the Software Update Readiness tool that generates a wide variety of error messages and cannot be fixed by the various registry fixers. I sent a my log files from the failed installs along to Microsoft tech support, hopefully they can update the SURT and the SP-1 Automatic Update to fix the problem. Otherwise the most time-saving approach is to do a re-install that leaves the files and installed programs intact.

Read other 1 answers
RELEVANCY SCORE 57.6

Hey guys!

So I will start by saying I am pretty tech savvy, so don't try to dumb it down for me. If I have a question, I will ask!

So, we got a computer into our class (I'm a student at a High School). It is a personal favour. It started with Dell telling me it couldn't locate it's BCD FIles. I did some tracking, and couldn't find the files needed, and they don't have any discs or USB's provided by the OEM. Great. That's a problem.

My second thought was to grab Hiren's BootCD v15.2 to grab anything important off of the drive (It has Linux and MiniXP. Both options failed. Kind of starting to irritate me at this point. I asked the person if anything important was on there, the answer was no, so I went with a full reinstall.

Now, I do have a Dell DIsc, which is authorized for any Dell Computer to install Windows 8. But of a brick wall, but no R/W Disc. Transferred things into an ISO for a USB stick using Rufus. Boot into it, fails. Now I'm really mad. At this point I went into the CMD from "Repair" option in the stick. I cleaned the drive of ALL info, drive letters, everything. I created a new volume to store info, assigned a Drive letter ( C:\ ). The new drive is a RAW data storage type, "converted", got an error, checked and it said it was NTFS. Great, reboot, retry an Install -- fails.

I'm quickly running out of options now. I'm lost to what to do, the issue simulates what happened to my personal machine a number of years ago, but that was ... Read more

Read other answers
RELEVANCY SCORE 57.6

Security Update for Windows 7 for x64-based Systems (KB3033929)

Installation date: ?3/?11/?2015 8:57 AM

Installation status: Failed

Error details: Code 80004005

Update type: Important

A security update. . .

I can't find any info on this error.  Tried the update twice and both times it failed.

A:Update KB3033929 fails with error code 80004005

You may want to try the following:
1) Running the following FIX-it (for resolving WUS issues)
  LINK:  ~http://support.microsoft.com/en-us/kb/971058 

2) Then change windows update to "manual" update mode (as aposed to install updates automatically)
3) Scan for updates
4) Uncheck and then "hide" KB KB3033929
The update should no longer download or install going forward. 
You can then revert the WUS to ?automatic? if you desire (recommended). 
Perhaps MS will FIX and re-release this in the future. 
At that point you could choose to ?unhide? the patch and then 
try to reinstall it at that time.

Read other 95 answers