Over 1 million tech questions and answers.

Random BSOD with random error code at random moment

Q: Random BSOD with random error code at random moment

Hello
Ok now i'm out of solution so i come here hoping that someone could help me
I always had bsod hapening randomly but not like the this week
I got 2 bsod/day when i'm playing, when i'm staring at my monitor or even when i'm sleeping with random error code like 0x1e, 0x24, 0x3b, 0x4a or 0xa
I read a lot of forum like this one of people having similar problem and most of the time people were talking about testing the ram so I ran mdsched.exe last night but no error has been found
They also talk about using the windows debuging tool so I tried to download it but even the debuger downloader is buged!

So if someone could help me find out what's the problem that would be great

ps: No need to ask i already uploaded the minidumps of the this week here: https://www.dropbox.com/s/57a0dv8l7x...mp%20files.rar

RELEVANCY SCORE 200
Preferred Solution: Random BSOD with random error code at random moment

I recommend trying the free service from Zip Cloud. It's currently our users' favorite backup and storage solution and will save you headaches down the line.

You can get it direct from this link http://goo.gl/rFYDxc. (This link will open the Zip Cloud homepage.)

A: Random BSOD with random error code at random moment

Welcome to SF mandrac , please follow the Blue Screen of Death (BSOD) Posting Instructions.

And testing the RAM using WMD is no longer the recommended way going about doing so.
Testing the RAM:









Quote: Originally Posted by koolkat77


Test and Diagnose RAM Issues with Memtest86+:RAM - Test with Memtest86+


Tip
Pay close attention to part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.




When done with the testing procedure take a picture and upload it here.

Read other 7 answers
RELEVANCY SCORE 110.8

Three days ago my water cooling failed (got up to 77C while gaming is when I noticed the problem as my CPU should not go over 62C). I decided to install an aftermarket heatsink instead of a new water cooling system ,and add a few more fans just to make sure my whole motherboard was getting plenty of air flow. I installed a Cool Mater Hyper Plus 212 heatsink. I followed the instructions, and looked at a few installation videos on my phone just to be sure. I'm pretty positive everything was done correctly including the thermal paste as my system has not gone over 45C while gaming even playing games on Ultra settings.

I got one BSOD late last night, after about 6 hours of it being on but no other problems after that. Today however I have been having BSOD issues the entire time at random times from just 5 minutes up to 2 and a half hours between BSODs. They have ranged from: NTSF_FILE_SYSTEM, PAGE_FAULT_IN_NONPAGED_AREA, KMODE_EXCEPTION_NOT_HANDLED, and SYSTEM_SERVICE_EXCEPTION

I have researched the errors on google all day and tried fixes for each one such as running memory diagnostic tool, deleting the old page info from memory and creating a new one, deleted all of my video drivers and reinstalled them, and I've even opened my case to make sure all my memory and cards are plugged in all the way.

These are the errors that BlueScreenView gave me:

120313-25490-01.dmp 12/3/2013 11:01:36 AM PAGE_FAULT_IN_NONPAGED_AREA 0x00000050 fffff87f`f903edfb 00000000`00000008 ffff... Read more

A:Random BSOD problems in the past 2 days. Random errors at random times

Welcome to the Forum.

Please remove the software:

Code:
Start Menu\Programs\Advanced SystemCare 7 Public:Start Menu\Programs\Advanced SystemCare 7 Public
Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling. This allows you to remove leftover registry entries of the software: Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems





Quote:
This software is a known cause of BSOD's. The windows 7 operating system does not require these registry cleaning software. They often tune-down rather than tune-up and can wreck the OS beyond repair. Microsoft have improved Windows 7 significantly and it is much better at organising and optimising itself than its predecessors. Check this, this and this thread for evidence. If you feel the need to use a registry cleaning or optimisation software, most of us recommend the use of CCleaner - PC Optimization and Cleaning - Free Download but make sure you back up the registry before making letting ccleaner delete anything. 10 Tips on How to Properly Maintain Your Computer



Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Start Menu\Programs\McAfee Online Backup Public:Start Menu\Programs\McAfee Online Backup Public
McAfee is a known cause to BSOD's. Please remove it and use Microsoft Security Essentials it is recommended from a strict BSOD perspective, compatibility... Read more

Read other 9 answers
RELEVANCY SCORE 107.6

Hey Guys,
My PC has been running great for about 3years then all of a suddenly i've started getting BSOD. Only thing i can think of was on the day they started, i installed Borderlands Pre sequel to play with my girlfriend. When it happened i realised my watercooling pump had packed up and thought that was the issue (ive replaced the system and its still doing it) So i think my pump may have packed up at any time and i failed to notice.

Its doing it with nothing open but a brower, in games, all over the place but at random times. I ran a mem Test and everything came back fine on my memory. I tried a Prime test and it blue screened. I dont understand mem dumps to save my life though which is where im hoping you guys can come in and save me <3

If anyone can point me in the right direct that would be great, im hoping its a driver problem somewhere but i just dont know where as it started all of a sudden.

I hope i've uploaded everything required (ive included all dumps since this problem started)

Thanks for any help in advance
Toby

A:BSOD at random time with what appears to be random error codes

I'm finding that im getting ntoskrnl.exe as a problem as well as the bug code 0x0000001e. I'm still not at all sure what these point too.

I also did a much long Memtest and the Modules failed 2 tests. But im not sure if all my problems are memory or not.

I also tried to run verifier but when my computer crashed it just distorted the screen and froze. I wouldnt let me boot, so i had to boot to safe mode to turn it off.

any help will be greatly appreciated

Read other 2 answers
RELEVANCY SCORE 106.4

Hello,
after searching through many forums and Windows help sites i still can't help myself to find, why i am getting these bluescreens. I even installed Windows completely new, but after installing the Realtek GBE network driver (manually, cause Windows didn't find it) the 'fun' began again. I removed all Realtek drivers again and installed the latest i could find on the Realtek site and it seemed to run smoothly. Then i downloaded all the other drivers like the AMD Graphics and Soundblaster Z driver and installed them. The BSOD's came/come completely random. Today i've been able to play three Dota 2 matches without any problems, then 15 minutes later again. I also have to say this system ran like this for half a year without almost any problems or BSOD's. It somehow became slow and i tried stuff, broke it and now it seems still broken, although i formatted the drive and reinstalled Windows.

I've tried to debug the minidumps myself but it says something different evertime (I'll add the dmp files at the end, although there has not always been one created after a BSOD). I've tried reinstalling all the drivers and no help. I've put all stuff from AMD/ATI into the exception of Avira Antivirus, because i've read there might be interferences.

I ran MEMTEST86+ for like 3 hours - no errors. I have ran disk scans - nothing.

The BSOD is different every time. The time i get it is completely random. The only common i could recognize is that STOP: 0x0000001E (0x0000000000000, 0x000000... Read more

A:Random BSOD's at random times often error 0x0000001E

Please follow Blue Screen of Death (BSOD) Posting Instructions and upload the results with your next post.


Code:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x1E
PROCESS_NAME: avguard.exe
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
That is your Avira Anti virus


Code:
*** WARNING: Unable to verify timestamp for avnetflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avnetflt.sys
avnetflt+0x7000
fffff880`069f29d8 fffff880`069f2c88
fffff880`069f29e0 fffff880`069f2c00
fffff880`069f29e8 fffffa80`120aa388
fffff880`069f29f0 fffffa80`1209ba10
fffff880`069f29f8 00000000`00000001
fffff880`069f2a00 fffffa80`120aa350
fffff880`069f2a08 fffff880`02636511 avnetflt+0x4511
Avira again. Uninstall Avira with the Avira Removal Tool Avira AntiVir Removal Tool - Download


Code:
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiKernelCalloutExceptionHandler+e
fffff800`02a7d5be 90 nop
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt!KiKernelCalloutExceptionHandler+e
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: hardware
DEBUG_FLR_IMAGE_TIMESTAMP: 0
IMAGE_VERSION: 6.1.7601.18409
MODULE_NAME: hardware
FAILURE_BUCKET_ID: X64_IP_MISALIGNED

Code:
lmvm atikmdag
start end module name
fffff880`11088000 fffff880`11f98000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmd... Read more

Read other 9 answers
RELEVANCY SCORE 106.4

Hey everyone, Im new here on this forum.

I've been having this extremely frustrating problem ever since i swapped out my Motherboard for a new one. I reformatted my computer multiple times, yet my computer seems to BSOD randomly.

What happenes is that everything becomes unresponsive; cant alt+tab, cant ctrl+alt+del etc etc. everything freezes randomly... then boom, BSOD. its happened twice, with no apparent pattern.

And then, when it restarts, it tries booting but then it goes into the boot selection screen and my SSD is nowhere to be found. I have to power off then power on again for it to boot up and log in.
- System

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

EventID 41

Version 2

Level 1

Task 63

Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2012-02-26T23:15:40.693210900Z

EventRecordID 6298

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Jason-PC

- Security

[ UserID] S-1-5-18


+ EventData

BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0

I've attached my BSOD info along with my Heath report.

if anyone could help please let me know.

Windows 7 Home Premium 64x
System hardware age: from 3 years to a few months.
OS age: just recentl... Read more

A:Random BSOD during Random times, error 0x8000000000000002

No DMPS in upload

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 8 answers
RELEVANCY SCORE 106.4

Hey!

I recently upgraded my setup with an Asus M4A78LT-M mobo, Athlon II X4 640 processor and TakeMS 2x2GB 1333MHz DDR3 memory. After installing the parts I tried to boot to Windows but it always resulted in the same BSOD so I reinstalled my system.

After installing Windows for the first time I had some problems downloading updates and I got a couple of BSOD's during the update process. I then thought the installation was faulty and reinstalled it again from a different DVD. Once again I got two BSOD's during the Windows update but after all updates and drivers had been installed the problems vanished and three days pass without any problems.

Today I was watching a movie from my computer and suddenly the computer made a BSOD. I rebooted, opened Event Viewer and got a BSOD again.

I ran memtest for 6 hours and it passed 5 times without errors. I had set the memory timings to 9-9-9-24 and memory voltage to 1.5 after the first BSOD's a few days back to ensure they were running at the proper settings. Apparently it didn't help.

I'm really not sure what might the problem. The new processor consumes 25W more than my previous E5200 so maybe my 500W power can't keep up with it sometimes?

All the required files are attached and information of my setup can be found in my profile. I really hope someone smarter than me could figure out what might be the problem!

A:Random BSOD's with random error messages after a new setup

Added a new minidump from the latest crash. Happened again while watching a HD-movie. Also a bump.

Read other 9 answers
RELEVANCY SCORE 106.4

Hello I've been having these blue screen issues since I got the computer and the thing is, it's random but also not random. My computer may go weeks without crashing then suddenly (most likely triggered by running a certain program or game) I crash and then it happens like 10 times in 1 hours or until I get fed up. Another thing, is, I used to play a couple games here and there and this one game I played (not very resource intensive btw, usually fairly outdated older games) would never have any issues, then upon triggering the wave of crashes somehow, my computer would start crashing periodically while playing this game. But other times I could play the game for a couple hours even without a single problem.

This made the issue really hard to diagnose but I do have this info which may or may not help...

- The crash may be related to memory as a lot of the error codes are like X00000000 (have a lot of 0s in them) and a buddy of mine said that usually means memory error. However I have installed new memory chips and still crashes
- One of the codes usually looks something like XFFFF80A08 or something like that though...
- There are a couple ways I can guarantee a crash which includes: trying to sync music to my phone, trying to burn a cd, trying to install certain programs (bigger programs)
- The first crash I ever had followed the genuine windows warning and messages, I've used various remedies for it which usually work for a little while, of course until my computer ... Read more

A:Random yet not random BSOD crashes + genuine error

Quote:





Originally Posted by lc94fsh


- The crash may be related to memory as a lot of the error codes are like X00000000 (have a lot of 0s in them) and a buddy of mine said that usually means memory error.




Not true. The numbers listed in the bugcheck parameters (inside the parenthesis) are simply hex memory addresses and can be any hexadecimal number/letter.

I ran 14 of the dumps you submitted.

The bugcheck on all 14 dumps was 0x124 = WHEA = Windows Hardware Error Architecture, a/k/a "Machine Check Exception" - a severe and unknown hardware error.

0x124 BSODs are notoriously difficult to solve because the cause is simply "unknown hardware failure".

Unfortunately, the dumps are incapable of telling us which piece of hardware has failed. Dumps are only good for figuring out software (driver) problems.

All I can really do here is to give you some hardware diagnostic programs to run.RAM - memtest86+ - run 1 stick at a time; alternate the slots - https://www.sysnative.com/forums/har...memtest86.html
HDD - SeaTools for DOS, LONG test - https://www.sysnative.com/forums/har...agnostics.html
FurMark video card test - https://www.sysnative.com/forums/har...ress-test.html
Prime95 CPU - https://www.sysnative.com/forums/har...s-testing.html

The problem may also be with other hardware parts such as the motherboard or PSU for which there are no software tests.

If you are encountering a spe... Read more

Read other 1 answers
RELEVANCY SCORE 104.8

computer randomly blue screens while watching youtube, or just doing nothing.
bluescreens at least once a day, NEED HELP!

A:BSOD random, error code f4

Hi culi1997.

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Test your HDD with Data Lifeguard Diagnostic for Windows.
Let us know the results. Alsopost a screenshot of the HDD using CrystalDiskInfo - Software - Crystal Dew World.

____________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck F4, {3, fffffa80... Read more

Read other 5 answers
RELEVANCY SCORE 104.8

Hi! I have the files as noted in the pinned topic but I have to write this on my phone as my computer currently won't stay up long enough to post. I'll edit from my computer.
I'm getting a "hardware malfunction - call your hardware vendor for support - the system has halted" message, sometimes as Windows is loading, sometimes ten minutes into use, never in safe mode. I don't know what hardware/drivers are at fault - I installed a new graphics card, updated Windows, uninstalled and reinstalled peripherals, nothing. I kind of lost track of what I did because of the many crashes.
My brother built this computer so I'm not sure all the specs but here's what I can find
Windows 7 x64, Came with it I guess
System is probably 3 or 4 years old
I have not reinstalled the OS, I don't have disks
CPU - intel core 2 duo cpu
Video card is GeForce gtx 750ti
Not sure where to find motherboard or power supply info
It's a desktop.
It's also really slow, but only has 2GB ram so I guess that's part of it (it's reallllly slow tho even with no applications running).
Edit 1: logs posted
Edit 2: I'm running verifier but can't run the other two, no CD on this machine (burner or drive) - any other options?

Read other answers
RELEVANCY SCORE 104.4

Recently had my computer open and lying on it's side for around 5 days, put the cover back on and booted it up to play some WoW and started having BSOD's, constantly at windows log in, or 5-30 mins sitting at desktop or playing games. Including zipped folder of eventvwr files. Thanks in advance!

A:Random BSOD's random error codes

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 9 answers
RELEVANCY SCORE 103.6

Hello,
Built my first custom rig about 2 years ago now and recently have started to get BSOD 3b and its happening more often every day.
I have done what the instructions say and uploaded the zip file.
Let me know what else i need to do, Thanks for your help guys.

EDIT - I recently bought a Logitec G510s keyboard, and i think the BSOD's startedaround the same time as installing this. Should this be something i try and removing as the drivers are all upto date. I have not tried this yet because reading most of other peoples errors seem to be related to graphics or antivirus.

Cheers

A:BSOD error code 3b, Happens at random times.

Welcome to SF Epenian .

If you feel the issues started around the time you purchased the keyboard
then yes it would be wise to stop using it and remove the drivers, at least as a troubleshooting step.
The next step is updating to Service Pack 1:
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Assess the situation and report back .

Read other 1 answers
RELEVANCY SCORE 103.6

Hi,

I have been struggling to figure this problem out for the past 2 weeks. Hopefully I can explain before I BSOD again... I have had my Qosmio x505 Q870 since 2010 and I have just started getting BSOD with random errors (Memory management, multiple IRP Complete Requests, and a few more). I used Memtest86+ with no problems, I updated my drivers that I could in Device Manager. I guess I am mostly wondering what the file is that is making these BSOD happen and how to continue to fix it. I do not have a way of reading my dump files and was hoping someone could help me out with that.

I did upgrade my memory from 2x2gb to 2x4gb because I was getting these BSOD with the old RAM too and thought new ram would fix it...

thank you

A:BSOD Random Error code each time

Hello xjam and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information if able. One of our BSOD experts should be by later when able to further help.

Read other 1 answers
RELEVANCY SCORE 103.6

Hello,

I've recently upgraded my pc where I installed a new Motherboard (ASUS Z87-PLUS) , CPU (I5 4670k) and a GPU (GTX780TI). After having done this I've started encountering some problems while using it. The computer has started BSODing along with the message "WHEA_UNCORRECTABLE_ERROR". The BSODing is seemingly random where I've had it crash both when I'm gaming and while the pc is idle. I am not running an overclock and as far as I know this is not a temperature issue.

I have already installed a fresh version of Windows 8 in an attempt to fix this. I've also updated all of my drivers along with my BIOS as well as Windows to their latest versions. I've started to suspect that I've got a faulty component although I'd like some with this.

Thanks

A:Random BSOD error code 0x124

Hi

Please post a Speccy snapshot of your system following Speccy - Publish Snapshot of your System Specs - Windows 7 Help Forums

Read other 9 answers
RELEVANCY SCORE 103.6

? OS - Windows 7, x64
? Age of system: Not more than 1 year

? Intel Core i5-2500K 3.3GHz
? Gigabyte Radeon R9 280x
? MotherBoard: Assus P8P67 REV 3.0
? Power Supply: Thermaltake SmartSE 730W

Despite the BSOD my PC is working perfectly fine. The last BSOD happened In moment I pressed Shut Down button in windows. Other ones happened a month ago while playing games. And some happened while browsing the internet. Unfortunately I don't have other dump files saved. But I'll post if it happens again.

A:Random BSOD On MY New PC, every time different error code...

Bump

Read other 4 answers
RELEVANCY SCORE 103.6

Hi everyone!

This is 2nd time i am asking question in this forum previous time you guys helped me a lot thanks!

Ok now lets get to my problem my pc just having random bsod while gaming,browsing,watching videos etc.

All my drivers are updated and i also keep my windows upto date! but from 1 month i am having strange random bsod which is so annoying

I still can,t find the fix why its causing bsod which software or hardware causing that bsod i have no idea.

I tested my pc with stressing programs such as prime95,aida64 extreme,hyper pi programs like that but i did,nt get a single bsod that time it just happen randomly some time i get bsod at ideal as well.

Everything is on default values i did,nt overclock anything all hardware running on their default values.

Here,s the actual image of bsod :

Attachment 321507

PC SPECIFICATION :

CPU = INTEL CORE I7 2600K 3.4GHZ 8MB CACHE
RAM = KINGSTON 8GB DDR3 1333 MHZ
CPU COOLER = NZXT RESPIRE T20
MB = GIGABYTE Z68A-D3-B3
VGA = GIGABYTE GTX 770 OC 2048 MB GDDR5
MOUSE = G500S LASER GAMING MOUSE
PSU = GIGABYTE SUPERB 550 WATTS
CASE = GIGABYTE GZ-G1 PLUS
CD/DVD = 2 LG SUPER MULTI DRIVES
HDD = WD BLUE 320 GB 7200 RPM,WD GREEN 1TB
DISPLAY = SAMSUNG SYNCMASTER P2370HD
OS = MICROSOFT WINDOWS 7 SP1 64BIT
CONTROLLER = XBOX360 CONTROLLER FOR WINDOWS

After all that i came here to ask you guys whats the problem is? please help me!

Thanks in advance!

FULL REPORT :

A:Random BSOD While Doing Anything Error Code = 0x00000124

It's having BSODs because your Windows installation is counterfeit. You have an Acer PID on a Gigabyte retail motherboard.


Code:
Host Name: PENTIUM-4---I7
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: nabil009
Registered Organization:
Product ID: 00426-OEM-8992662-00006 ----> Acer PID
Original Install Date: 7/5/2013, 5:48:43 AM
System Boot Time: 6/13/2014, 2:11:13 AM
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z68A-D3-B3
System Type: x64-based PC
Counterfeit installations such as yours can contain heavily modified code that causes the installation to behave it unexpected ways. Analysing BSODs and determining their causes on these sorts of installations is very unreliable. For this reason, many analysts won't attempt it.

My recommendation is to install a genuine Windows 7. This will minimise the problems you are experiencing, and make subsequent diagnosis of BSODs far more reliable. Once you are running a genuine Windows 7 installation, and are still experiencing BSOD's, we will be happy to help you solve them.

Read other 1 answers
RELEVANCY SCORE 103.6

Hi all,

The dreaded keeps happening randomly on my 9 year old laptop, it's been running solidly for the whole 9 years up until 2 days ago, when this BSOD keeps randomly striking it down.
I've added as much of my system spec as I can find, hopefully this will be ok, if not, please let me know and I will look for any other system information you require.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 100000ea
BCP1: FFFFFA8006EE6060
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\060416-22464-01.dmp
C:\Users\Ben Frizzell\AppData\Local\Temp\WER-70918-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Read other answers
RELEVANCY SCORE 103.6

I am getting a few random BSOD error codes a day. I win-zipped the dump files and uploaded them below. If you need any other information I will be glad to provide it.

A:Random BSOD, error code 0x0000007a

Welcome zmartin87, please follow the Blue Screen of Death (BSOD) Posting Instructions .

In the meantime, please test the HDD.


   Warning
The Following Method Should NOT Be Performed On An SSD!
Testing the HDD:
Perform a Disk Check | Disk Check- Scroll down to OPTION TWO of the tutorial and use the /R switch in the CHKDSK command | chkdsk C: /R.
Then Post the Disk Check results following | This Tutorial.
Once back in Windows, download Crystal Disk Info and post a screenshot (multiple shots if you have more than one drive).
Download SeaTools for DOS if you don't want to use a CD to test the HDD you can use YUMI ? Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
If SeaTools for DOS is unable to recognize your HDD:
Visit HDDdiag and follow the instructions | Or follow the instructions below.
If SeaTools For DOS does not recognize the drive;
Boot into the BIOS using the *Fx key.
Look for an entry called SATA Mode (or something similar), it should be set to IDE / AHCI.
It's probably set to AHCI which is why SeaTools doesn't recognize them in the DOS environment.
Set it to IDE then save and exit usually by pressing the F10 key.
Now boot into SeaTools and it should detect the drives.
Start the Long Test and let it run.
Upon completion don't try to boot into Windows as it will only result in a BSOD, go back into the BIOS
and change the SATA setting back to what it was in the first place.

*Popular BIOS access... Read more

Read other 1 answers
RELEVANCY SCORE 103.6

I have been plagued with this BSOD for a while now. I have ran my driver utility and as far as I can find I have the most current version of the BIOS. I ran a system scan that said it found no integrity problems. I will attach the minidump file and pray that the issue is simple and just evades me. This computer is very imprtant to my wife due to the fact that she uses it for school.

Thank You,
Michael
OS: Windows 7 Home
Prossessor: AMD Athlon II

A:Random BSOD with error code 0x0000001E

crud: just had another BSOD. This is getting old. I used to get one for BUGCODE_USB_DRIVER but I think I finally got that one done. This one seems more generic and I am gettingmore frustrated by the day. Please help if at all possible....Thanks again

Read other 3 answers
RELEVANCY SCORE 103.6

Hi, when i watch YouTube or play games or do the normal things i do, i after some time (no specific time it will happen) i will get a BSOD saying "KERNEL_DATA_INPAGE_ERROR" this is a serious problem because when im in some hardcore fighting and my friends need me, i sometimes get a random bluescreen and my pc reboots. It started occuring ever since i bought a new cpu and mb. I upgraded from an AMD FX-8350 and a shitty MSI board to an i7 4790K and a MSI Z97S SLI Krait. I reinstalled W7 after getting the new parts. I will link the .dmp file(s).

Ask me whatever u want, and answer as quick as possible!

A:Random BSOD's Error Code 0x7a

Diagnostics Test

 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run following testsShort Drive Self Test
Short generic
Long generic
If the short generic fails, no need for the long generic.



   Note
Do not run SeaTools on an SSD as the results will be invalid.


Run chkdsk
Disk Check - Windows 7 Help Forums

Run HDTune toscan for errors, no quick scan but full scan
check the health,
benchmark.
It may take some time, but please take the time you need to perform it properly.
Let me know what the results areof the error scan,
make a screenshot of the health of every hard drive and post the screenshots,
post screenshots with the benchmark of thetransfer rate,
access time,
burst rate,
cpu usage.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC... Read more

Read other 1 answers
RELEVANCY SCORE 103.6

Hi! fist of all, sorry for my bad english.

I've been getting BSOD for a like a month now, i had my laptop stored for a year because the power jack and poder cord of my laptop where broken. A month ago i asked a friend to help me soldering both. Since then, ive been getting bsod when i open several chrome tabs, connect a second monitor to the laptop, or try to run unity3d. BSOD usually happens after a couple of minutes of doing one of those things or just random after using the computer for a couple of hours.

i ran memtest86 for 14 hours, chkdsk /f /r, 0 errors.

im wondering what else can i do, please help.

A:Random BSOD, Error code 0x124

Hello and welcome Chris sorry you have been waiting for a bit.
I am no expert but will have a go - now in the dump files there is a possible problem with the processor or it could be down to drivers of some sort ie chipset.

First can you run Speccy and if possible send back the temps on that machine please https://www.piriform.com/speccy/download if the readings come back as rather high then I suggest you check out the air intake and outlet of the laptop see my little ditty (below) for checking that out because the machine has just been lying around for so long it might well be just a build up of crud in it.



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80046d4038, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b6000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000010015, Low or... Read more

Read other 9 answers
RELEVANCY SCORE 103.6

when i start to use wifi connection after an interval random time my pc restart with BSDO.
I think that the problem is the wifi card and i try an usb card but the same problem returns.
with ethernet everything is fine.Attachment 53318
Can you help me to solve this important problem?
thank you very much

A:BSOD using wifi, error code random

Out of 12 memory dumps there were 7 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- dirt/dust/hair/fur/crud inside the case. Blow out the case/vents with canned air (DO NOT use an air compressor or vacuum as they can cause damage to the system)
- missing Windows Updates
- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

You can get a head start on the hardware diagnostics if you'd like - they are located here: Hardware Diagnostics

Your UEFI/BIOS dates from 2011. Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the UEFI/BIOS is a very unforgiving process - and one mistake can physically damage your motherboard. If possible, use the "inside Windows" flash mechanism (if your OEM provid... Read more

Read other 2 answers
RELEVANCY SCORE 103.6

For a few weeks know I've been experiencing random blue screen crashes all with the same error code (d1, more info to come). The computer will crash whether I'm playing a game, on the web, or if my computer is just sitting idle. I've tried factory restoring the computer, updating the drivers via Dell and Intel, and every security, memory, and hardware scan I've run has come back clean which has brought me to the end of my computer know-how. Below I've posted my system specs, the error codes that Windows gives me when my computer boots after blue screening, and I've attached some crash dump files. Thanks for any help in advance!

System Specs:
Model: Inspiron 5423 (14z)
Processor: Intel i7-3517U (1.90GHz)
Ram: 8gb
OS: 64-bit Windows 7 Home Premium
Graphics: Intel HD Graphics 4000 & AMD Radeon HD 7570M
Disk Drives: Hitachi HTS5450 (500GB) & Litenoit LMT-32 (32GB SSD)

Error Codes:
BCCode: d1
BCP1: 0000000000000038
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88001753CA8

A:Occasional random BSOD Error Code d1

It appears to be caused by your Intel rapid storage drivers


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {38, 2, 0, fffff880016f0ca8}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : iaStorA.sys ( iaStorA+5bca8 )

Followup: MachineOwner
---------

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff880010566b0, fffff88004129868, fffff880041290c0}

Probably ... Read more

Read other 1 answers
RELEVANCY SCORE 102.4

MOORE-PC-Thu_12_22_2016_234557_79.zip - Google Drive

My pc is getting blue screens quite often and it doesn't matter what i am doing. I could be playing video games or I could be using google chrome, and it would still crash. I have brought the PC to two different computer repair stores, and neither of them have been able to find any issues with my PC. I have ran memtest86+ for three passes with no errors, and have also run the memory diagnostic tool with no errors. I looked at the minidump with bluescreenview and have seen that for each of the bsod there is an error with ntoskrnl.exe+37ab70 for the bccode f4 errors, and ntoskrnl.exe+e50c2 errors. The two errors that I am seeing are the f4 error and the 7a error, but the f4 is more frequent. This error has occurred ever since I moved to the US from Asia, and I dont think it has anything to do with the PSU. It couldn't possibly be an issue with windows because I have switched from 7 to 10 and back to 7, and there is still the same issue. I have also switched from an older HDD to an SSD, and the problem still persists. Could it be RAM (because memtests are not 100% trustworthy)? Or could it be GPU/Mobo? CPU issue?

Please look at the minidump and respond if it's a hardware issue, or if it's an issue with my drivers or software. Thanks.

Read other answers
RELEVANCY SCORE 102.4

Hi all,

A couple of days ago my laptop started randomly BSODing every so often, sometimes as close as 5 minutes apart, but sometimes it stays on for a few hours.

This happens while playing games, browsing websites or even when just leaving the computer alone, I really can't see a pattern.

I've tried a few different things to resolve the issue myself:
- updating drivers to the most recent version. When upgrading the iastor.sys driver with the latest version, they error message changes slightly, but BSOD remains and frequency seems to increase
- run anti-rootkit scanner (TDSSkiller) -> negative
- chkdsk, sfc scannow, system test that comes with alienware prior to booting into windows, they all run without issues

Finally, I've reset the laptop to the factory image from the restore partition. Unfortunately, that didn't fix the issue and I'm out of ideas.

I hope someone can help shed some light on the issue or give me some idea on what to try next to resolve the issue, I would be most grateful.

SFC package attached with most recent eight dumps between wiping the drive and posting here.

A:Random BSOD, iastor.sys related - error code d1

All the dumps indicating to Intel RST (Rapid Storage Technology) driver.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {38, 2, 0, fffff88001713ca8}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
Probably caused by : iaStorA.sys ( iaStorA+5bca8 )

Followup: MachineOwner
---------
Turn off RAID in BIOS. Get rid of intel rapid storage.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "Disc Drives" by clicking on the triangle in front of it.
Select one item under it, right click, uninstall.
Continue the process for all items under "Disc Drives"
Now restart the computer. At restart, windows will auto configure the appropriate system driver, msahci.sys.
Let us know the results.

Read other 3 answers
RELEVANCY SCORE 102.4

Hi my notebook got BSOD with random error code and frequent everyday at random time

it started suddenly , i already try spyware,antivirus,last know good configuration and restore but still got BSOD. it become more and more frequent recently with 5-7 times BSOD every day

here the kernel dump :

A:BSOD Random but frequent every day error bcc code A/D1/1000008e

some solution i already tried :

change anti virus to microsoft essential

scan with TDSSKILLER.EXE and found stpd as risk and i uinstall it with daemon(using special progam for stpd uinstaller)

using tune up 1 click maintenance

i cant repair my windows because my notebook dvd rom already broke

Read other 7 answers
RELEVANCY SCORE 102.4

Hi,

I've had this Dell laptop for about a year. A few months ago, it started blue screening, pulling a "PAGE_FAULT_IN_NON_PAGED_AREA" message, along with the bug code 0x00000050. I downloaded BlueScreenView, to find that the error apparently originated in ntoskrnl.exe, but I'm not sure how to fix it. I did a memtest, but it came back clean. About two months ago, I tried speaking to Dell, and after remotely accessing my system and scanning for errors, the only thing they could tell me is that the system had to be wiped. I didn't want to do that, and it stopped doing it for about a month and a half, so I figured it was fine, maybe just some sort of fluke or something. For different reasons, I wiped the system about a week ago. My issue started again last night. It's blue screened twice in the last 12 hours, pulling the same error codes and messages as before.

As per instructions, I've uploaded my dump file. If you need anymore information, let me know and I will gladly give it.

Thanks in advance for any help you can give.

Read other answers
RELEVANCY SCORE 102.4

i have been getting random bluescreens all with error code 3B. ther has been no pattern. I have also uploaded here the SF diagnostic tool results. can someone help?

A:BSOD Error Code 0x0000003B Random Timing

Welcome

If you are overclocking any hardware, STOP. Reset any changed values back to default.

Most of your Bug Checks are 3B, its usual causes are: System service, Device driver, graphics driver,
memory STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION

One of your Bug Check is 50, its usual causes: Defective hardware (particularly memory - but not just RAM),
Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS.
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

None of the dumps tell us the probable cause.

Suggestions:

Code:
Start Menu\Programs\avast! Free Antivirus Public:Start Menu\Programs\avast! Free Antivirus Public
* Uninstall Avast! antivirus for now and keep MSE. Run a full scan if possible after its updated.
Microsoft Security Essentials - Free Antivirus for Windows

* To make sure your hard drive is good run:
Disk Check

* Run the system file checker to repair any damaged files within windows:
SFC /SCANNOW Command - System File Checker

* Hard drive test both short and long with:
SeaTools for Windows

* Test the RAM with memtest86+ for 8 passes on each stick on each slot. Preferably overnight:
RAM - Test with Memtest86+

One of your dump shows rockusb.sys causing BSoD.
Rockusb.sys driver | What is Rockusb.sys file?

Check for an update on its driver. If there's none, suggest you uninstall it.

Let us know the results.

Read other 9 answers
RELEVANCY SCORE 102.4

hi,
i got the problem of random BSOD/freeze. when my pc reboots sometimes he reboots again at the page loading operating system. and i keep receiving the BSOD/freez after that it appears in 20-30 min. the only way to stop the freezes or BSOD's are that when my memory is half available (i got 8GB DDR3 and it only shows 3.99GB available). the things i tried already are :
-newest driver of GPU
- memtest for 24h : no error's ( also tested the module's one by one and all together )
-reassamble the pc.
-forcing windows to use the 8GB of ram (in MSconfig)
-tested my memory on GPU
does anyone know how to fix it i'm out of idea's for the fix. here are the dump files

greets

A:random BSOD/freeze while using pc error code 0x000003

The reason why your computer can access only 3.99 GB is that you have 32 bit OS.

Install 64 Bit OS and your computer will be able to access 8 GB Ram

Read other 9 answers
RELEVANCY SCORE 102.4

Hi Everyone

i got new High End Gaming PC ,,installed windoes 8.1 64bit and started to get random BSOD after normal use/ Gaming Freeze ( the same file that shows here ntoskrnl.exe and many others )

I tried windoes 7 and and the same thing happen if not worse ,, i went back and installed windoes 8.1 64bit

i tested my RAM first thing with memtest86 for 2 passes with no errors ,, i'm running Prime95 all the night and the max temp was 50c

but 5 min ago when i tried to run firefox it froze for a few second then i got the error mentioned above

i tried to run the Driver verifier in windoes to see if there is anymore errors or BSOD will happens but i didn't know how to use it
-------------------

update:

i just got another BSOD ,, trtied to play BF4 then it crashed before i play actually
i updated the attachment
Please find the file attached and help me solve this and enjoy my new Pc

Best Regards

A:Random BSOD ,,Error code: 0x7A ntoskrnl.exe

Hi

Please provide a Speccy snapshot of your system following Publish a Snapshot using Speccy - Internet Applications Mini-Guides

Make sure to post the web link "Speccy" displays.

Read other 10 answers
RELEVANCY SCORE 102.4

Hey guys! I dont know why but i get BSOD with the massage 0x0000001E. Sometimes i dont get it like for 3 days, but sometimes i get it like 3 times in less than 12 hours. Here is a log from dm log collector. Hope u can help me with this one.

A:BSOD in random times with error code 0x0000001E

Code:
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\YUSRA\Downloads\Compressed\MARKO-PC-26_05_2015_151631,15\052615-28532-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18839.amd64fre.win7sp1_gdr.150427-0707
Machine Name:
Kernel base = 0xfffff800`02c11000 PsLoadedModuleList = 0xfffff800`02e58730
Debug session time: Tue May 26 19:04:52.096 2015 (UTC + 6:00)
System Uptime: 0 days 0:00:19.751
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

.................................................
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
*******************************************************************************
* *
* ... Read more

Read other 1 answers
RELEVANCY SCORE 102.4

the bsod dont seem to occur at any paticular time seems pretty random. a .rar file is attached for possible assistance . hope i did everything correct. thank you

A:seems random bsod restarts to quickly to get any error code

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 116, {fffffa80038ed4e0, fffff88003e42cb0, 0, c}

Unable to load image igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : igdkmd64.sys ( igdkmd64+23cb0 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa80038ed4e0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff88003e42cb0, The pointer into responsible device driver module ... Read more

Read other 1 answers
RELEVANCY SCORE 102.4

Hey folks,

I'm the victim of at least one daily BSOD crash over the past few weeks. I'm the office guiney pig testing the first 64bit machine introduced onto the network...

I can't seem to identify what single occurance is causing the crashes, as they seem to be triggered by anything from typing and email, to very large graphics in photoshop, to just waking the pc from sleep.

I've attempted to update ever hardware driver I can find on the machine - to no avail. In an effort to remedy the scenario I have recently updated to Win7 pro - 64bt - SP1, and have also recently upgraded the graphics card from the onboard intel hd to an AMD Firepro v3900.

From WhoCrashed and Windbg the offending party appears to be either ntkrnlmp.exe or ntoskrnl.exe, but not sure where to go from here with that information.

Any help greatly appreciated - SF Diagnostics attached...

A:Random BSOD's - Bugcheck code: 0xA - Error: IRQL_NOT_LESS_OR_EQUAL

Hi scottagecheese.

The zip contains a stray crash dump only, and it does not contain much more information about the crash.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you mad... Read more

Read other 5 answers
RELEVANCY SCORE 102.4

So I bought this Laptop for 10$ off my friend whos moving to vegas. I'm thinking it has bad RAM but I dont know a lot about Comp. hardware. Hopefully you can help me out. Here's the SF DT .zip file.

A:BSOD At random times. Idk the error code. I did not record it :/

Welcome aboard. Your crash dump says ...

Code:
.......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffff6fc50018ff8, 0, 0, fffff80002969635}

Probably caused by : memory_corruption

Followup: memory_corruption
---------
According to Carrona.org, STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility.

The BIOS is very old here. Try to update it.

Code:
BIOS Version/Date TOSHIBA V2.20, 3/10/2008
Dont you use any Antivirus? I failed to find any in your system. You should use Microsoft Security Essentials - Free Antivirus for Windows

As it is indicating the RAM modules, stress test those.
RAM - Test with Memtest86+

Let us know the results.

Read other 3 answers
RELEVANCY SCORE 102.4

Hi Guys am a newbie to the forum and i thought i start with a hum dinger for you, the random restart

I'm well aware you need loads of info to diagnose this issue so i'll post what specs i think you'll need then repost whatever you ask for..

I've used sandra to get ll the info so it should be ok i think...

Proc - AMD Athlon 64X2 Dual Core 3800+ 2Ghz
Mobo - KV2 Lite
Chipset - K8T880Pro
Gfx - Nvidia Geforce 7600gs 256Mb ddr2
HDD - 250gb Maxtor STM3250820AS Sata
Sound - Creative soundblaster X-FI Extreme
OS - Xp home SP3
PSU - SumEvision 550w
Ram 2x 1Gb Kingston KVR

Updated all drivers

This pc was a fresh install yesterday as Norton decided he wasnt going to let me use net no more, so i looked at my desktop n thought "time for a format" (as ya do) fully formatted n reinstalled, started to load up world of warcraft and randomly between 5mins and 1hr get buzz then a restart, initially thought it was WoW but then noticed if i do anything excessive really it forces restart, havin a serious head scratch wi this one and would appreciate any valuable input as to wht to try next, any logs you need just gimme info how to get em and i'll repost, i've used the site for a while unregistered to analyse probs of friends etc but this one is seriously checkin the stability of my brain...

Thanks in advance..


Error code from BSOD - Stop 0x0000008E (0xc0000005, 0xf7b70981, 0xb8a4bac, 0x00000000)
Mousewd.sys - Address F7B70981 ... Read more

A:Random Restarts, updated with BSOD error code

No replies necessary, used my brain n sorted it myself
 

Read other 2 answers
RELEVANCY SCORE 102.4

Hello,

I've been having BSOD crashes for some time now and haven't been able to attribute them to any particular action. They sometimes occur when the computer is just sitting idle.

System Specs
Windows 7 Home Premium 64-bit
Original OS (OEM)
Hardware age: 2 yrs
OS Installation age: 2 yrs (never reinstalled)

According to BlueScreenView, almost all of the crashes have been caused by driver "ntoskrnl.exe", with one instance being caused by "atikmdag.sys". I'm a novice at this so I don't know how to go about fixing the problem. Any assistance would be appreciated.

An example of the typical error information is below and the performance monitor zip file is attached. The zipped Windows_NT6_BSOD_jcgriff2 folder was still too large to attach (10 MB). Is there any way to make it smaller (note: there are 50 dmp files)?

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8003D2A060
BCP3: FFFFF80000B9C4D8
BCP4: FFFFFA8004510370
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\020912-25303-01.dmp
C:\Users\Esi\AppData\Local\Temp\WER-83569-0.sysdata.xml

A:Random BSOD crashes...error code 0x0000009f

No DMP files included in upload

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 6 answers
RELEVANCY SCORE 101.2

Rather vague title I apologize.

Setup:
Operating System
Windows 7 Ultimate 64-bit SP1
CPU
Intel Core i7 Extreme 965 @ 3.20GHz 46 ?C
Bloomfield 45nm Technology
RAM
16.0GB Single-Channel DDR3 @ 530MHz (7-7-7-20)
Motherboard
EVGA EVGA X58 3x SLI Classified 3 (Socket 423) 29 ?C
Graphics
Dell 3008WFP(Digital) ([email protected])
2047MB NVIDIA GeForce GTX 660 Ti (EVGA) 50 ?C
Storage
931GB Western Digital WDC WD10 01FALS-00K1B0 SCSI Disk Device (SATA) 35 ?C
447GB Corsair Force GS SCSI Disk Device (SSD) 34 ?C
Optical Drives
motorola XT926 USB Device
HL-DT-ST BD-RE GGW-H20L ATA Device
TSSTcorp CDDVDW SH-S223Q ATA Device
Audio
High Definition Audio Device
PSU
CORSAIR HX Series CMPSU-1000HX 1000W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS Certified Modular Active PFC Compatible with Core i7 Power Supply

This is with current idle temps. I get random restarts with no minidump and just an error code 41. The restarts can happen After a long period of time (8+ hours idle), or just shortly after running a video game (APB:R forces a restart within 10 minutes)

Drivers are updated, I have scoured forums and past solutions over the course of about 2 weeks. Advanced System Settings option to automatically reset has been turned off. NVIDIA Control Panel's global setting has been set to Maximum performance. My RAM is only two days old. I have an aftermarket CPU water cooling system installed.

I have run several temp logs in games that I would suspect force a ... Read more

A:Random restarts. No BSOD. Event viewer error code 41.

If you have not already done so; try running a sfc /scannow and or a chkdsk /f via a elevated command prompt(run as administrator) to see if there are any errors and if there are; whether or not they can be fixed.

Read other 3 answers
RELEVANCY SCORE 101.2

This is a custom-built desktop system. I built it at the end of September and it has been running fine with no problems up until this month. Since the beginning of the month, it has BSODed 4 times: Dec. 2nd, Dec. 6th, Dec. 19th, and today (Dec. 22nd). Each time, using "BlueScreenView" it shows that the driver causing it was "ntoskrnl.exe" and the error code was: 0x0000003b (For the BSOD that happened today, Windows did not capture a minidump for some reason, so I can only speculate that it was the same error...)

There is no real consistency in what causes it. The screen will just randomly "mess up" with kaleidoscopic distortion, any sound playing will stutter, and then the system crashes to a BSOD. I have installed no new hardware since I built the computer. The last two programs I installed before this began were Skyrim (Nov. 28th) and CDBurnerXP (Nov. 26th). It's hard for me to see how either of these could be the culprit, since it has never BSODed while they were running.

My only "guess" as to what might cause it is a partitioning issue. When I first installed Win7, it took up the whole disk (1 TB) with one partition. Later, I created separate OS and DATA partitions. However, the Windows disk management utility did not allow me to create the OS partition of the size I wanted, it limited me to something like 400 GB. I used GParted on an Unbuntu live USB to make the partitions I desired (250 GB OS and 750 GB DATA). I think this ... Read more

A:BSOD occurring at random in ntoskrnl.exe, error code: 0x0000003b

Driver Verifier returned something interesting. When I restarted, Windows initially failed to start, going to a BSOD I had never seen before: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION with an error code of 0x000000c1. When I next restarted, Windows ran startup recovery and asked me to restore to a restore point. After that, it started normally. For some reason, this BSOD also did not create a minidump.

Read other 9 answers
RELEVANCY SCORE 101.2

I'm not really sure what happened, walked away from my computer, came back and it had crashed. Restarted it and got a Bluescreen error message but forgot to copy it down.

Any help would be greatly appreciated!

A:Seemingly random BSOD - didn't manage to get the error code

Just a stab in the dark with no errors but you might want to use this time to check your drivers to be sure everything's up to date. It's also never a bad idea to backup your critical data just in case you have a hardware device going bad. Keep a notepad handy in case it happens again and report back with useful data like error codes, what you were doing when it happened, etc.

Read other 3 answers
RELEVANCY SCORE 101.2

Hi my computer has BSOD'd about 4 or 5 times since I rebuilt it back in December, the only things I kept in the rebuild were my 1TB HD, PSU, disk drive, and the case.

When the computer comes back up windows pops up a "Windows has recovered from an unexpected shutdown, check for a solution online" message. The following picture is the given problem details when these occur: http://i.imgur.com/BFJenHk.png

I couldn't figure out how to access the files listed in the details, but I can zip them and upload them here if it would help you guys out.

As far as the old HD vs new HD thing goes, I installed windows on the new HD, and then transferred over the data from the old one to the new one that I wanted to keep and then wiped the old harddrive (via select all and deleting all the files I realize now this could be the issue maybe)

Please let me know what I can do to help you guys, help me troubleshoot my BSOD issues!
Thanks,
Matt A.
EDIT: After creating my post the site popped up BSOD posting instructions, which I will be appending here...Also, sorry if I was supposed to rename the zipped diagnostics information

A:Random BSOD's - sorry haven't been quick enough to grab the error code

Hello and welcome FatHalpert mate you obviously have a new Motherboard I take it and if you used the old OEM (its activation will be tied to that old board) unless you got the ok from Microsoft - just explain the board went south and can you use it (the old OEM) on a new board they are usually good with this - then you will have problems.
The alternative is to buy another OEM and install it.

Read other 7 answers
RELEVANCY SCORE 101.2

Hi there am trying to fix a random bsod for a friend and by random I mean random, shes can be playing a game on the net or just browsing the computer will blue screen and quickly flash off and restart iv tried a few things but cant get to the bottom of it and am starting to think its maybe a software or driver issue somewhere...

Iv attached the mini dump and other files for anyone who is willing to help me, it would be much appreciated.

Thanks In Advanced
Micky

A:Random BSOD Unknown error code All files attacted

Welcome aboard.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {28, 2, 0, fffff880011aa6fd}

Unable to load image \SystemRoot\system32\drivers\ndis.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ndis.sys
*** ERROR: Module load completed but symbols could not be loaded for ndis.sys
Probably caused by : NETIO.SYS ( NETIO!RtlCopyBufferToMdl+1d )

Followup: MachineOwner
---------
NETIO.sys is a microsoft provided driver, and it cannot be the real cause of the crash. But it indicates some network blockage. Some unsuitability .... but what may cause it?

A deeper look at the latest crash dump reveals it:

Code:
fffff880`031ed718 fffff880`05aa308e*** WARNING: Unable to verify timestamp for mfefirek.sys
*** ERROR: Module load completed but symbols could not be loaded for mfefirek.sys
mfefirek+0x2908e
Description here: Driver Reference Table - mfefirek.sys

McAfee is the most well known network blocker, it is to provide network safety, so
I would suggest to uninstall this program.

Code:
Start Menu\Programs\McAfee Family... Read more

Read other 8 answers
RELEVANCY SCORE 100.4

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1039

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA80089B44E0
BCP2: FFFFF880107EB6AC
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004


Files that help describe the problem:
C:\Windows\Minidump\031814-40763-01.dmp
C:\Users\Henry\AppData\Local\Temp\WER-96346-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Suddenly the screen goes black, and it looks like its on sleep mode(the screen) the computer keeps running in the background for a bit, then when i recover windows(restart via power button) it prompts me with this


LOG:

A:BSOD Error code 116, Playing games/Idle, random times

Thank you for your time!

Read other 5 answers
RELEVANCY SCORE 98

Hello, I've been having random BSOD crashes with weird distorted text I can't make out on the screen while playing a video game called For Honor.
 
It seems to be happening at random, mostly after playing the game for a while the PC completely freezes and the BSOD error appears.
 
I also monitored the temperatures of my HDD, GPU and CPU while playing the game, alt tabbing.
 
The cpu seemed to always stay around 40-50C, the GPU would range from 50 up to 70 maximum, the HDD seemed to be running fine at around 27-29C most of the time.
 
Help would be greatly appreciated
 
 
 
 
Here is the speccy link: http://speccy.piriform.com/results/4WTAaTXfOgfncy4RdQbCPX8
 
Thanks.

A:Random BSOD crashes with distorted text/no error code while playing video games.

It looks like only 5 of the 6 CPU cores are working.

Read other 4 answers
RELEVANCY SCORE 96.8

My GF has had a Toshiba L500 laptop for 4 years now. It's a great model and it worked well...till now.

It started about two weeks ago, with 1 blue screen every 1-2 days. I haven't reinstalled her windows for about a year, so i figured that was the problem.

Four days ago it started blue screening randomly (from just after the welcome screen, clicking on start button to opening a new tab in a browser). Sometimes it dies instantly, other times it keeps on going for an hour.

I tried:
- fresh install of windows (x64) (it bsod just after the input of computer name)
- another install (bsod just after welcome screen); i figured it was the video card, so i downloaded the latest driver, but it didn't help. I ran a check disk, everything was ok.
- tried the driver posted by toshiba and the newest posted by intel; i didn't get to installing anything else, because it kept crashing
- another install, this time Win 7 x32 Home, and let it update everything, didn't install anything else; still nothing.
- ran memtest x86, 2 passes once, 7 passes the second time, no errors.
- removed ram cards one at a time, still nothing
- heavy load, stressed every component, no crashes, everything was ok.
- checked out some settings in bios, nothing there
- tried driver verifier (it froze at windows logo the first time, restart 2 minutes after log on with no blue screen, froze at the windows logo the third; the I put it out of it's misery and disabled the verifier)

Safe mode works just f... Read more

A:Random BSOD at random moments on Toshiba L500 laptop; graphics card?

Hi luciflash.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.17273.x86fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Also update Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter from Realtek

Let us know the results.

Read other 9 answers
RELEVANCY SCORE 96.8

I've been plagued by odd problems since making this custom build about a month ago, but the latest is the increasing frequency of BSODs. They never occur at load (gaming with high end specs), but often occur at shutdown (forcing a restart before I can then actually shut down). I normally boot into windows in 8-10 seconds (SSD) but the latest post-BSOD boot took about five minutes from typing my password into the login screen to where my desktop popped up. A subsequent reboot was at normal speed. The memory dumps always include the NT OS kernel, but then also some other driver (different each time), which I suspect just happens to be the one trying to run at the time of the error.

Things I've tested:
Temperatures (didn't really suspect them in the first place, but I'm running cool)
Memory (Both the native Windows test and memtest found no issues)
Hard drives (chkdsk came back clean)

All drivers are up to date, although the uploaded report might show an older version of my sound card driver, as I just reinstalled it at the behest of windows action center (which didn't make the notification go away, mind).

I'm hoping someone wiser than I can make sense of this, because it all seems so random to me. Thanks in advance to whoever that is.

A:BSOD at seemingly random times, memory dump blaming random drivers

How many passes did you take memtest for?

Code:
Debug session time: Mon Apr 14 14:39:57.702 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 3:33:21.985
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
BugCheck 1A, {41790, fffffa800b8e2ca0, ffff, 0}
BugCheck Info: MEMORY_MANAGEMENT (1a)
Bugcheck code 0000001A
Arguments:
Arg1: 0000000000041790, A page table page has been corrupted. On a 64 bit OS, parameter 2
contains the address of the PFN for the corrupted page table page.
On a 32 bit OS, parameter 2 contains a pointer to the number of used
PTEs, and parameter 3 contains the number of used PTEs.
Arg2: fffffa800b8e2ca0
Arg3: 000000000000ffff
Arg4: 0000000000000000
BUGCHECK_STR: 0x1a_41790
PROCESS_NAME: AvastSvc.exe
FAILURE_BUCKET_ID: X64_0x1a_41790_nt!_??_::FNODOBFM::_string_+35084
BiosVersion = 2201
BiosReleaseDate = 11/22/2013
SystemManufacturer = To be filled by O.E.M.
SystemProductName = To be filled by O.E.M.
??????????????????????????????????????????????????????????????????????????????????????``
Debug session time: Thu Apr 10 10:21:01.348 2014 (UTC + 6:00)
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
System Uptime: 0 days 8:53:05.394
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : aswSnx.sys ( aswSnx+27e08 )
BugCheck 1A, {31, fffffa800f46b160, fff... Read more

Read other 1 answers
RELEVANCY SCORE 96.4

Heyy..

So yesterday due to a sudden power outage (happens allot here), my windows started behaving erratically.

First when the power came on my windows 7 ultimate 64 bit, was stuck on windows logo. i waited for about 20 mins and it was still stuck. The HDD read activity light on my casing was active the whole time and it was red.
i restated the system and the same thing happened. I tried the safe mode and it didn't boot..It was stuck at classsys.pnp with solid red light of HDD..i restarted my system again.

After about 10 restarts the system finally booted up after ..i thought the problem had been solved but after 10 or so mins a damn BSOD appeared..i restated the system and the same thing..stuck at the logo with constant read activity on HDD..
Today also..the same things..stuck on logo..restart again..after 3 tries windows starts..then BSOD..then again stuck on logo..Its has become an unpredictable cycle of what the system will do next..

The exact same thing had happened before about 3 weeks back, and i formatted my HDD and reinstalled the windows new..Now i dont know what to do..Is it a software problem or my hardware like motherboard, RAM or HDD is failing..plzzz help urgently..

PS..i have attached my crash dump and other files necessary fro evaluation.

A:Random BSOD after start and Random stuck on windows logo screen

Test your HDD with Seatools for DOS. Take both the short generic test and the long generic test.

Let us know the results.
_______________________________________

Code:
BugCheck 7A, {20, ffffffffc000009d, fffffa8007a0a3c8, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+50080 )

Followup: MachineOwner
---------

Read other 1 answers
RELEVANCY SCORE 96.4

I have finally had it up to here with the BSODs, so I really need help. I ran a windows memtest and it detected no errors. I just finished updating to SP1 with pretty much most updates too. The BSODs I get the most are:

Driver IRQL not less or Equal
System Service Exception

and these two I just got before I decided to post:
Interrupt Exception Not Handled
No More IRP Stack Locations

I recently took this desktop back from my brother. I bought a new harddrive and installed a fresh Windows 7 x64 Home Prem. on it. I have two other HDD's connected too, a 1TB and a 500gb. I built this originally (and I had no problems when I built it) back in 09. System Specs are included. I replaced the RAM too. I know it isn't on the Approved List for my mobo, but nothing on the mobo lists 8GB and I'd like to use 8GB.

My parts are:

Asus P5P43TD Mobo
Core 2 Duo 8400 Wolfdale
(2x4gb GSKILL F3-12800CL9D-8GBRL)
XFX Radeon HD4890 (but i hadn't noticed, but radeon now only sets out drivers for the entire series, 4XXX, etc.)
Sunbeam (Ithink) 780w psu

I'm not in the market to buy a new performance pc (although the parts I have my eye on are roughly 1400)

Please lmk what you think I should do.

A:BSOD doing random things (Google Chrome, minecraft, random times)

I see some memory corruption in the dumps. Can you follow this tutorial: RAM - Test with Memtest86+

Report back after the tests

Thanks Ant

Read other 3 answers