Over 1 million tech questions and answers.

Cpu running at half speed help please

Q: Cpu running at half speed help please

hey i have an asus p4vp-mx thats suppose to have a 2.8 ghz processor with 1.2 gigs of ram but according to some of my games their reading the processor as 1.5ghz so none of these games are properly working even though my computer more than meets the hardware requirements anyway any help would greatly be appreciated

RELEVANCY SCORE 200
Preferred Solution: Cpu running at half speed help please

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Cpu running at half speed help please

Sounds like the BIOS is set up incorrectly.

Whaen you 1st boot up, hit Del a few times and you'll enter the BIOS.

Hopefully, on the far right tab, there will be an option to "Load Optimised Defaults". Do that, reboot and see what it's reported as now.

CPUz will tell you what it is actually running at: http://www.cpuid.com/cpuz.php

Read other 11 answers
RELEVANCY SCORE 70.4

i just put together a pc with :
giga-byte ga-7vaxp motherboard
amd athlon xp 2600+ w/ 333 front side bus which is supposed to run at 2.1 ghz
my problem is that my computer shows to be running at 1.2 ghz
I'm pretty sure that I have the jumpers set wrong but cannot find any info on how to set them (m/b manual does not help ) any ideas would be greatly apreciated thanks
 

A:cpu running at half speed

Read other 13 answers
RELEVANCY SCORE 70.4

Hello Everyone! So after reading dozens of threads about the problem im having.. i have to call uncle and ask for help. I installed a new ssd into my pci-e slot of my Dell precision t7400. I found it to be the cheapest way to get the fast speeds i was hoping for. I have a SanDisk SDSSDA240G installed into a PCI-E SATA 3 adapter(Images: pci-express_01 / ssd)info). Im running windows 7. I have made sure i am in AHCI and that i am running the correct Bios. The Card is in the First PCIE (Slot1) and my graphics card is in the other PCIE (Slot4). It is plugged into the only SATA port that was available (Image: MotherBoardSetup). Ive run the benchmark app and it seems like its only running 3G instead of the 6 that i was hoping for.
I have Dual quad cores Intel Xeon e5450. EVGA GeForce GTX 560 2GB Graphics Card. 32G of DDR2.
Windows 7.
Im a 3D artist and use multiple 3d programs. I know its running fast now, but any extra would be helpful. Can anyone please take a look at these pics and help me out?
Thanks -DT

A:SSD running at half speed. Please take a look

I also have this pic from when i startup...and one of the PCIe card i bought...if that helps.

Read other 7 answers
RELEVANCY SCORE 70.4

hey im running my pc with 2x 1GB patriot 6400 sticks of ram on an Asus p5w dh deluxe mobo and an intel core 2 duo E4500 2.2ghz currently overclocked to 2.6ghz. what i have noticed is that the ram on dual channel is running at 180mhz and on the post bios message i see "dual chanel ram 3200" and if i hitch up my processors clock speed the ram speed falls. whats going on and how can i fix this. all help appreciated thanks.
 

A:Ram running at half speed

oh and if i mod the ram speed as well as the cpu speed i get a message from the bios "over voltage or overclocking failed"
 

Read other 8 answers
RELEVANCY SCORE 69.6

I had to replace the hard drive in my Pavilion when the original failed. I reinstalled the original software from the Recovery CD set I purchased from HP. The system now identifies my processor as an Athlon running at 750 MHz instead of the original Athlon 1.3 GHz. This 750 MHz figure is the same in the BIOS setup screen and in Windows XP My Computer Properties screen. I have not changed any components other than the hard drive, and the processor is the original Athlon 1.3 GHz. What would account for the decrease in speed and what can I do about it?

Thanks,
John

Windows XP Home Edition
AMD Athlon 1.3 GHz
512 MB RAM @133MHz
A7V-VM motherboard
 

A:AMD CPU running at about half original speed

Go to www.lavalys.com and get the free Everest Home Edition. Run that, it will tell you all about your PC and its components.
You may need to do a reset to basic values or optimised values of your BIOS.
Check the mobo-manual for multiplier settings in the BIOS.
 

Read other 1 answers
RELEVANCY SCORE 69.6

I'm running a P111 coppermine 1Ghz on cusl2-c MB. The cpu is continually reported as running at 500mhz, although diagnostics (sandra etc) show cpu range as 500-1000mhz. The bios settings have changed and I cant reset them to 1000mhz because on save & exit the bios just reappears saying that the settings are wrong. (have updated bios etc etc.)It will only work on a lower setting. This is causing me major probs with CAD apps.
What can this be?????
 

A:heeeeeeeelp!!! CPU running half speed

Read other 13 answers
RELEVANCY SCORE 69.6

I have an AMD Sempron 2300 which normally runs at 1.8 Ghz. Now, it says it is running at 950 Mhz, and i dont know why. i tried restoring my BIOS to fail-safe defaults, and i changed the CMOS battery, but it didn't work. I really need help on this, so any thoughts are greatly appreciated.
 

A:AMD processor running at half speed. why?

Try opening up some program like Internet Explorer or something that will stress your CPU. See whether the speed goes back to normal.

Some processors automatically throttle back when idling to reduce power consumption. When you stress them by opening a program or doing something like that, their speed goes back to normal. See if that works.

What socket is your CPU?
 

Read other 10 answers
RELEVANCY SCORE 68.8

I have a Inspiron 1520 with a CPU running at half speed. I thought the original CPU, a Core 2 Duo T5450, was failing, as it was running at 1 to 1.2 GHz and it should be 1.6 MHz. I replaced it with a T8300 2.4 GHz, which now runs at 1.2 to 1.6 GHz.
I don't see anything in the BIOS that could change it. I'm going to try and flash the BIOS (it is at the newest version).
Anything else I can check?

A:Inspiron 1520 CPU running at half speed

Does the system correctly recognize the AC adapter, or is it showing "unknown"  (look at the system setup -- F2 at powerup) -- to verify?

Read other 2 answers
RELEVANCY SCORE 68.8

Hello, i have recently purchased a conputer. The processor is a intel pentium 4, 2.8 GHz, however it is running at 1.4GHz. Can anyone help me? Specs from CPUID follow:-

Processor :- Intel pentium 4 (northwood)
Package:- Socket 478 mPGA
Spec:- Intel(R) Pentium(R) 4 2.80GHz
instructions:- MMX,SSE,SSE2
Core speed:- 1400MHz =(
multiplier:- x 14.0
bus speed:- 100MHz
Rated FSB:- 400MHz
MOBO chipset:- intel i845GL
Type:- DDR / Size:- 512MB
DRAM freq:- 133.3MHz
FSBRAM: 3:4
Let me know of any other specs needed.

Regards

Strike191
 

A:Intel pentium 4 running half speed

Read other 6 answers
RELEVANCY SCORE 68.8

Hello, im a new member to the forums but i use it a lot for information. I recently bought a linksys network adapter for my desktop and i did not know the passphrase to connect to the wireless. I then reset my router and i got it all working but it is now running at half speed. Yesterday, before my reset, i was running at 159 mb/s. and today, after reset, it is at 72 mb/s. It was my first time reseting the router and i am not very experienced so i may have screwed something up. any help is appreciated
 

A:Wireless running at half speed after reset

Read other 9 answers
RELEVANCY SCORE 67.2

If anyone has any Ideas on this I would appreciate it greatly.

A:AMD Athlon 2650e, 1.6GHz Processor is running at half speed!

Hi and Welcome to TSF!


What happens if you run a game or a large program? The processor should increase the the max power. Today most processors can idle therefore they don't use max power.

Read other 4 answers
RELEVANCY SCORE 65.2

Hello, Samsung 970 is the best SSD in the market and it cost me 460 Euro to buy the Samsung 970 Evo NVMe M.2 SSD 2TB  in order to make my T470 20HD achive Read/Write 3.500 and 2.500 MBps. But this expensive SSD is running half of its speed on T470 20HD read and write 1748 and 1685 MBps. While most Laptops with Intel dual core ( https://www.userbenchmark.com/  )  with Samsung 970 Evo they got ( read and write speeds: 3.500 and 2.500 MBps respectively).   T470 20HD read and write 1748 and 1685 MBps.   From Lenovo website I bought this (Tray 1 for ThinkPad M.2 SSD drive Cost: Euro 30):   I am not fine with T470 20HD half speeds of read and write 1748 and 1685 MBps.Looking forward to hearing from youthank you in advanced.

Read other answers
RELEVANCY SCORE 61.2

I'm pretty sure I clicked a fake mega upload download page. All the sudden all types of fake spyware diagnostics start running. I'm also pretty sure the problem has made changes to my computer as well. I say this because on start up or shut down I get all sorts of " xxxx cannot close due to runtime error" or " xxx must close would you like to send an email to microsoft". Up to this point I have ran Rkill, Spybot, MBam and VGA. All will run without being terminated by the virus and all find and will remove several trojans and etc. However the browser is still hijacked and every once in a while I get a Microsoft Development Enviroment Run pop up but it stops and shows another error box saying " an exception of type Microsoft JScrip runtime error object was not handled.============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\System32\svchost.exe -k netsvcsC:\WINDOWS\system32\svchost.exe -k WudfServiceGroupsvchost.exesvchost.exeC:\WINDOWS\system32\spoolsv.exesvchost.exeC:\Program Files\Common Files\Maxtor\Schedule2\schedul2.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\Program Files\Bonjour\mDNSResponder.exeC:\WINDOWS\eHome\ehRecvr.exeC:\WINDOWS\eHome\ehSched.exeC:\WINDOWS\Syste... Read more

A:Windows Security Shield Alert, windows running half speed and browser hijacked

I forgot to add there is a fake "windows security alerts" icon on my bottom right portion of my tool bar. I haven't touched it but I can tell by looking its a fake.

Read other 4 answers
RELEVANCY SCORE 52

bought a used thinkpad t61 laptop with 2gb ddr2 ram and a t7300 cpu processor

using CPU-Z program, i checked 'memory' and it shows dual channel, symmetric, and ' dram frequency 332.5 mhz dual channel'

not the 667 mhz i was expecting ?

Detailed specifications - ThinkPad T61, T61p
maybe this is normal? or do i maybe have bad ram or a bad setting somewhere?

A:ram speed looks like half what it should be

You have to divide the speed (667 MT/s) by 2, as it is dual channel. You get ~333 MHz.

Read other 2 answers
RELEVANCY SCORE 51.6

I bought and iBUYPOWER pc (BB902) , and when test my internet speed and i get 40 mb, when my internet connection in all my other devices is 100 mb and the modem is really close to my PC
I use this realtek rtl8811au wireless lan 802.11ac usb 2.0 network adapter and i installed the lastest driver.

Please help

A:I get half internet speed on my new PC

Then the bottleneck would have to do with the Wi-Fi card built in to the computer. What you can do is try updating the driver for it from the manufacturer, but other than that, the hardware you purchased (inside the computer) is what is slowing you down.

Read other 0 answers
RELEVANCY SCORE 51.6

Hello,
I posted before and some how never got any results. Probably my fault. I upgraded to Windows 7 ultimate from XP home. All seems well and things are still pretty fast. When I do bandwidth speed tests, my results in 7 are 1.5 Mps download. In XP they were almost 3 Mbs in XP. I'm paying for 3 Mbs and I have always been close to that until I started using 7. I have tweaked everything to the best performance. Disabled all the eye candy and visual effects etc. Just wondered if I have missed something. I have 160 gig hd with only 1/4 used. 2 gigs memory. 3.2 gig Intel Pentium processor. I have disabled all non essential items. Any ideas on this? Thanks,
John

A:Download speed cut in half

  
Quote: Originally Posted by jsmoline


Hello,
I posted before and some how never got any results. Probably my fault. I upgraded to Windows 7 ultimate from XP home. All seems well and things are still pretty fast. When I do bandwidth speed tests, my results in 7 are 1.5 Mps download. In XP they were almost 3 Mbs in XP. I'm paying for 3 Mbs and I have always been close to that until I started using 7. I have tweaked everything to the best performance. Disabled all the eye candy and visual effects etc. Just wondered if I have missed something. I have 160 gig hd with only 1/4 used. 2 gigs memory. 3.2 gig Intel Pentium processor. I have disabled all non essential items. Any ideas on this? Thanks,
John



are you by chance using homegroup?

Read other 9 answers
RELEVANCY SCORE 51.6

Hi again...

My internet is normally 4-6 (sometimes higher) mbps download, .5 upload. It dropped to .1 on a wired and 2 wireless connections. Called ISP they said everything was testing fine until they finally found a problem on the line and they said it needed to be reinforced and it was their fault. They did that, and the speed went up to 2.5 mbps. They said a tech would need to come out and check for physical problems on my end.. the card in the box down the street and cables and such. They replaced the card to be safe, checked the other stuff, no speed improvement.
The tech tested the speed at the box outside, 12 mpbs. He came inside and tested the line directly, 12 mbps.
When I was running a traceroute the other day, it would always get stuck on one of there servers in louisiana before passing the signal. I have a feeling the problem isn't with my router but with whatever one guy did on their software end. He said barely anyone still has the copper connections which makes me think its not really a priority for them to care about the connection and most people are using the fiber optic which my landlord doesn't want to switch to for another few months.

I called them back to let them know the guy who i talked to before who said the problem would "definitely be fixed" after the tech came out and they said the tech is gonna have to do tests on the router which is fine if they aren't going to charge me, which they probably will, and alas the tech... Read more

A:internet is half speed after ISP did something

Read other 6 answers
RELEVANCY SCORE 51.6

I recently upgraded my VDSL speed to 40mbps down and 20mbps up. Since the upgrade my speed is only at about half. I am reading at about 19-20 mbps download. I had 20 down and 5 up prior to the upgrade. And always got full speed over WiFi.

I get my full speed over a ethernet cable. I have a actiontec V 1000 modem/router. or as Qwest calls it the Q 1000. It supports 802.11 N.
Its also dual band.

My laptop wireless card is a Realtek RTL8187B wireless 802.11 b/g 54mbps usb 2.0 network adapter.

I have tried changing the channel of my router. I also tried changing the power level of the radio signal. I also updated the driver.

I changed the channel of my realtek card as well. I am stumped. I also called my ISP tech support. They have no idea whats wrong. The person I spoke to thought 802.11 n was a model number.

If anyone knows what I can do to fix this, it would be much appreciated if you could help.
 

A:WiFi only half speed. Help.

Welcome to TSG!

Sorry to say that's all you'll get with 802.11 g. The 54Mbits/sec is the maximum physical layer bit rate. Actual throughput will be around 24 Mbits/sec Max.

Only way to "fix" it is to upgrade to 802.11 n.

I have an 802.11 n setup which connects at 130 Mbits/sec, but the Max throughput is around 60-65 Mbits/sec.
 

Read other 3 answers
RELEVANCY SCORE 51.6

I have dsl 3.0 mbps. I also have Vista....if that matters. Anyways, a couple weeks ago I noticed that my speed is now 100 mbps and when i did this http://www.speakeasy.net/speedtest/ my speed was 845 kbps. About a month ago I downloaded something that was supposed to maximize my download speed. I don't remember what it was called. At first I noticed it was slightly faster but now everything online is much slower. I have a wireless router but it's password protected and the wireless light isn't lit up so I don't think that's a problem. Please help!
 

A:My dl speed has been cut in half....what happend?

Register at DSLReports and run their Line Quality Tests. Post a link to the results here.
 

Read other 3 answers
RELEVANCY SCORE 51.6

I using my 12 year-old Dell Latitude C840 laptop running Windows 7. It was working fine until one day it started to run extremely slow. It has a 2.6 ghz Pentium 4, but it now starts up at 1.3 ghz, at times starts up at 1.3 ghz, or even 800 mhz. Very seldom I can get it to restart at full speed. This is definitely a hardware problem, since when I swap the disk to my old XP disk, This problem still occurs, even though back when I was using XP, it always ran at full speed.

Assuming I can't find the hardware problem, I'm looking for a windows 7 compatible utility that can bump the CPU back to full speed. Recommendations or solutions?

I actually have duplicate C840 laptop I was using to run openSUSE. This slow CPU problem hit the Linux machine over a year ago. I was able to find a UNIX utility that was able to bump the CPU speed back to normal. That machine is currently disassembled in an attempt to isolate the problem by swapping parts.

I'm confident this is not a Windows 7 problem, but I am looking for a Windows 7-compatible solution.

A:CPU powers up at half speed (or less)

Hi,

Go to the power configurations and make sure the CPU power is set to 100% maximum for both AC and battery.

You should also download a temperature monitoring program on both and see how temps are running. If the slow one is running hotter, you could have a problem with poor heat transfer from the CPU/GPU ti the heat sink because of an incorrectly attached heat pipe or heat transfer medium.

Check whether the SpeedStep option in the BIOS menu is enabled. If it's disabled it may cause the system running at half speed, whilst CPU is not idle.

Read other 1 answers
RELEVANCY SCORE 51.6

I bought and iBUYPOWER pc (BB902) , and when test my internet speed and i get 40 mb, when my internet connection in all my other devices is 100 mb and the modem is really close to my PC
I use this realtek rtl8811au wireless lan 802.11ac usb 2.0 network adapter and i installed the lastest driver.

Please help

A:I get half internet speed on my new PC

Your internet speed is determined by your broadband provider and 40Mb would be typical of a system where you have fibre to the cabinet near your home and then copper wires from the cabinet to your house. So this sounds correct unless you are expecting a much faster download speed such as you can get with fibre to the house.

The internal speeds of the wireless connections within your home are typically much higher as you have observed but at the end of the day the bottleneck is always the speed from your provider.

Read other 1 answers
RELEVANCY SCORE 51.6

I DOWNLOADED A MODEM BOOST PROGRAM THE OTHER DAY AND I INSTALLED IT'BUT AFTER THE INSTALL I FOUND OUT THAT MY MODEM SPEED WAS CUT IN HALF AND I CANT FIGURE OUT HOW TO RESET THE CONFIGURATION FOR IT.IT IS A SUPRAMAX 56I VOICE PCI MODEM,I DELETED THE MODEM BOOST PROGRAM AND REINSTALLED THE MODEM DRIVER BUT ON THE MODEM TEST PAGE THAT I GO TO SAYS ITS STILL L ESS THAN HALF MY NORMAL SPEED,I RUN WINDOWS 98 SE 200 MEG CPU AND 128 RAM,CAN SOMEONE PLEASE HELP ME RECTIFY THIS PROBLEM,I AM SURE IT IS NOTHING MAJOR BUT I CANT FIGURE IT OUT,THANKS TO ALL OF YOU WHO MIGHT HELP ME, MY NAME IS GUY.EMAIL [email protected]

PS I USE AOL FOR MY PROVIDER IF THAT HELPS
 

A:modem at half speed!

Read other 8 answers
RELEVANCY SCORE 51.6

I HAVE A 20mbit CONNECTION WITH VIRGIN MEDIA (NTL) BUT ONLY SEEM TO BE GETTING ROUND ABOUT 10mbit WHERE AM I GOING WRONG .
IVE TRIED VARIOUS WAYS TO SOLVE THIS BUT CANT SEEM TO GET ANYWHERE
ANY HELP WOULD BE APPRECIATED
MICHAEL...
 

A:Solved: Help Im Only Getting Half The Speed I Should Be

Read other 16 answers
RELEVANCY SCORE 51.6

Hi. I pay for a 3.0 mb/s att dsl connection. For some time now, pages seem to load slower than they did initially. After going to speedtest.net, my download speed was stated at 1.14 mb/s. This is not even close to the 3.0 I'm paying for! What might be causing this. Could the company purposely be giving me less speed thinking I won't notice? If it matters, I'm using Vista home premium and have a wireless gateway but I'm using my desktop and our wireless connection is password protected.
 

A:Actual DSL speed is less than half of what it should be. Help please.

Read other 7 answers
RELEVANCY SCORE 50.8

Hi All
I know I am lucky to have a 100mb internet connection (virginmedia) But I speed test and only get about 47mb (This is using my PC hard wired directly to the superhub).HOWEVER, when I run my PC in SAFE MODE WITH NETWORKING I get around 102 to 104mb ( which is great if I only used safemode).
Therefore something is draing my connection. I have scanned for Malware, Viruses ans disabled most things in the MSCONFIG but still no improvement.

I attach 3 screenshots which may be of those who know about these things
Any help would be great

Thanks

Rob

A:Getting only half the broadband speed being sent to router

My first guess would be to blame AVG. Try starting up with out AVG then testing for connection speed might help.

Read other 8 answers
RELEVANCY SCORE 50.8

I have a subscription to Comcast Cable, and a D-Link DI-604 Router (not wireless). Yesterday I hooked up the router (not to another computer, just wanted to see what would happen to my primary computer). To make the story short, the speed went from about 3400Kb/s to around 1600Kb/s. I tried it over and over again, unhooking the router, going directly from modem to computer, and got the same results every time. Are routers supposed to do this or is it fualty? If this is normal, is there a better way of "splitting" the connection between 2 computers without losing that much speed?? It is noticable when i download files, etc...

Thanx in advace,
X_Gamer7
 

A:Router cuts speed in half??

Read other 7 answers
RELEVANCY SCORE 50.8

Hello. I've been working on an old tower that I have on and off for about a year now. It has a soyo sy-k7ada v1.0 motherboard and an amd athlon 1800+ polomino processor. The trouble it was having was that it wouldn't post. No beeps or anything, just the fans spinning after power up. I've changed psu from a 250w to a 430w antec. I can get it to post now but only with the jumper settings on the motherboard misconfiged. This results in me getting only 766mhz instead of the 1.5ghz that I should be. When I have the jumpers set in the proper position it doesn't post. It has my bus speed set at 66mhz instead of the 133mhz that it should be at. The multiplier is right 11.5. T My question is would bad ram cause a situation like I'm having? I ran a memtest and it kept coming up with an fault at an address and then it would restart the test. I have one stick of pc 2100 512mb. There are 3 slots and I believe the motherboard can handle up to 1.5g of memory. When the tower was running before it had troubles with posting the speed it ran at was 1.1ghz. After doing research while troubleshooting I've learned that it should have always been running at 1.5ghz. Anyways any help in this matter would be greatly appreciated. I'm going to purchase another stick of ram to try. Thanks in advance.
 

A:Processor clocks at half speed

First I'd configure the MB properly - make sure the BIOs is set correctly for the CPU/Mem - and if it still doesn't work then maybe try new Mem.
 

Read other 3 answers
RELEVANCY SCORE 50.8

hey there. i'm running half life 1 (you know, the 1998 game) on my laptop and for some reason, it runs way too fast. i run around the maps at high speed, sound clips stutter, monsters are too quick, etc. i've had this problem before with tactical ops, however that was a relatively easy fix (i just typed cpuspeed=1800 into the console). im pretty sure its a problem with my cpu being too fast for the game and the game not being able to time itself properly. however, the tac ops fix i mentioned above doesn't work for half life. any one got any ideas?

specs:
AMD Sempron 3100+ (1.8GHz)
512MB DDR
SiS M760GX 64MB video card (supports openGL and direct3D)
Windows XP SP2
 

A:half life 1 game speed

i wouldnt say its your cpu been too fast, mines a 3700 (2.2ghz) and it runs fine.
you can never have too much power, only too little power.

see if theres any updates or patches.
 

Read other 1 answers
RELEVANCY SCORE 50.8

Hello,
My uTorrent is downloading files only at half of the maximum speed of my internet connection. I download files via HTTP at full speed (when good server. Also, it's not fault of the tracker or ratio 'coz I'm using private tracker which has about 50s/2l ratio at the current file I'm downloading. Also I have open ports. I have the same problem on XP, but from what I remember I don't have this problem on Ubuntu. I'm using router Modecom MC418

A:Torrent downloading only at half speed

  
Quote: Originally Posted by fiorello


Hello,
My uTorrent is downloading files only at half of the maximum speed of my internet connection. I download files via HTTP at full speed (when good server. Also, it's not fault of the tracker or ratio 'coz I'm using private tracker which has about 50s/2l ratio at the current file I'm downloading. Also I have open ports. I have the same problem on XP, but from what I remember I don't have this problem on Ubuntu. I'm using router Modecom MC418


Hi Fiorello! Welcome to SevenForums! μTorrent or any bittorrent client WILL NEVER reach the maximum speed of your connection. And HTTP servers probably won't either. Your lucky if you're getting half of your connection because most people only get a sixth of it (1MBPS on Bittorrent is AMAZING)!

So this isn't anything to do with your connection, however your ISP may be throttling BitTorrent so...

Open μTorrent and press CTRL and then P
Go to BitTorrent at the side
Under Protocol Encryption select "Forced" or "Enabled"
(This encrypts outgoing BitTorrent Traffic so your ISP can't tell that it's BitTorrent)
Tick "Allow incoming Legacy Connections"
Press "OK"

That's pretty much it.

Thanks,
ZeshanA
If a user helps you, click the scales at the top right of their post and give them rep!

Read other 2 answers
RELEVANCY SCORE 50.8

I am a complete noob re WiFi (alway use hard wired) but recently bought a cheap USB dongle described as 150Mbps 11n. On testing I found I was getting about 22Mbps download with the dongle (1 metre from router) compared to 62Mbps wired. Upload speed was about the same as wired.

A bit of Googling told me this was a simplex/duplex problem. I did a test with a friends laptop and got full speed, so its not my router (BT homehub) and I have the latest driver from Windows update. So - is this about par for a four quid WiFi dongle, or do I need to set some value or other to get duplex? I could see this half speed business being a problem for someone already on a low speed line.

A:USB WiFi speed half that of wired

Hi 3D Jed.

Could I have more details on the USB Dongle please?

Also is it a 3.0 USB? Maybe you friend has usb 3 and you only have usb 2?

Read other 7 answers
RELEVANCY SCORE 50.8

I just signed up for Comcast cable internet. I am going to be splitting the cable up for two computers by a router. The computers aren't going to be networked, just both are going to have cable running to them. Will this cut the speed in half because of the two computers, or will it still be the same speed as if I were to only have it hooked up to one?
 

A:Router cuts speed in half?

same speed.. unless you are using the other.. for Internet access at the time you are playing..if you are playing a game.. and another user gets on the computer and starts to DL "whatever"/check email/stuff.. then you will see a difference in your connection on the server you are on.

Unless you have a mega nice Cisco or something along those lines.. to do load balancing..
 

Read other 1 answers
RELEVANCY SCORE 50.8

Hello,
I'm having a problem with sound input. Basically whenever I try to record sounds using a microphone it records at half speed. I've tested this with two different microphones and Widows Sound Recorder (if I increase the play speed by 100% after finishing recording it sounds fine). I'm using the VIA AC'97 audio driver for the built in sound on a AZ11E motherboard. Also, if I enable feedback as Iím recording it sounds fine to me, just not when recording or talking online.

Has anyone ever seen anything like this before, or have any solutions/tips? Thanks in advance for your help.
 

Read other answers
RELEVANCY SCORE 50.8

I have bought 2◊8GiB DDR3 SDRAM by recomendation in Hardware mainteinance manual: Samsung M471B1G73DB0-YK0.But system shows only half speed of them: [email protected]:~$ sudo lshw -C memory
*-firmware
description: BIOS
vendor: LENOVO
physical id: 0
version: A4CN29WW (V 1.50)
date: 07/22/2014
size: 128KiB
capacity: 8128KiB
capabilities: pci upgrade shadowing cdboot bootselect edd int5printscreen int9keyboard int14serial int17printer int10video pc98 acpi usb biosbootspecification netboot
*-cache:0
description: L1 cache
physical id: 2e
slot: L1 Cache
size: 256KiB
capacity: 256KiB
clock: 1GHz (1.0ns)
capabilities: pipeline-burst internal write-back unified
configuration: level=1
*-cache:1
description: L2 cache
physical id: 2f
slot: L2 Cache
size: 4MiB
capacity: 4MiB
clock: 1GHz (1.0ns)
capabilities: pipeline-burst internal write-back unified
configuration: level=2
*-memory
description: System Memory
physical id: 25
slot: System board or motherboard
size: 16GiB
*-bank:0
description: SODIMM DDR3 Synchronous 800 MHz (1,2 ns)
product: M471B1G73DB0-YK0
vendor: Samsung
physical id: 0
serial: 378B8EF6
slot: DIMM 0
size: 8GiB
width: 64 bits
clock: 800MHz (1.2ns)
*-bank:1
... Read more

Read other answers
RELEVANCY SCORE 50.8

Can anyone explain this? My old Cat5E lan cable was cutting out and could not be repaired. So I went and got a new CAT6 UTP 9106 cable. The guy showed me this cable and it looked very tough. He asked how much I needed and I replied about 80 meters. My old cable was 70 meters long. ( I think the guy just put the new ends on the cable as it was already rolled up and he came back in about 5 minutes with the new end installed. There was not enough time for him to unroll all that cable, measure it and roll it back up again. Once I ran the cable and secured it there was a good 8 meters or more extra.)

I wanted to also run this cable inside flex tubing to further protect it from the elements. You may ask why the long length. I share the internet with my neighbor and that is how far it is from his modem to my house. Not a problem installing the cable things went fine and the cable was easy to push thru the flex tubing. I left the protective covers on while I ran the cable. Once everything was secured I hooked the lan cable up. Then proceeded to to a speedtest at speedtest.net. My download speed was what it was before. My upload speed was half the speed of what it was before. I did not change of the settings in the Bigfoot Killer Network Manager software . I did not change of the settings. Current settings are 1000 Mbps Full Duplex. My question is this - why did the upload speed drop in half? Before my upload speed was 20 Mbps and now it is only 9 Mbps. The modem is a fiber optic co... Read more

A:After new lan cable Upload speed cut in half

Sharing your neighbors internet is almost certainly a violation of the terms and conditions of his ISP agreement so unfortunately we don't want to assist with this and I'm going to close this thread.
 

Read other 1 answers
RELEVANCY SCORE 50.8

Just today I noticed that my CPU clock speed was 1.01Ghz when it should be 2.01ghz. It is an AMD 64 3200 not overclocked or anything. The only change I made was upgading my graphics card. It is now a 7800GTX 256. The power supply is 450W which is recommended.

Help?

Thanks

Ironfist
 

A:Solved: CPU at half speed suddenly

Read other 8 answers
RELEVANCY SCORE 50.8

So I just got a new laptop and unhooked my desktop and hooked that cable up to my new laptop (the ethernet cable that is). My internet has been given me garbage speeds (max 60KBps) on my desktop. So when I hooked up my laptop I immediately did a speed test on dslreports. I got just over 1.2Mbps and downloads were going at a regular 165 KBps. But then for some reason it just completely dropped down to 60KBps. Also I did a port test and before it dropped, a lot of the ports I tried were open, but after the drop, basically every port was closed.

So is this because of closed ports or something else? I should also note that the download speed has declined before. I can't remember the last time I got 1.2 Mbps. Before I got 60 KBps, I had it at 120 KBps, and then before that I had it at 1.2 Mbps. This is soo frustrating and I don't understand any of it. Also when I took a test on speedtest.net (when I had 1.2 Mbps) and compared it to the average ISP speed, I was not even close. I was waaayyy down...

The router is a Linksys RVS4000 if that helps.
 

A:Solved: Download speed cut in half

Read other 15 answers
RELEVANCY SCORE 50.8

Hey,

I have a strange problem in that my network speed to my laptop appears to be halved. I have a 152Mb/s service which comes through on my xbox one being on a gigabit network. My laptop is limited to 100Mb/s due to the speed of the network card.

The speed I obtain however, is ~40Mb/s through normal use, via ethernet cable or wireless. But, when I use safe mode with networking, the speed becomes ~90Mb/s as I would expect.

I have gone into Safe Mode and taken pictures of the then currently running processes and tasks. I tried comparing to the processes running on a regular use and decided to end specific tasks that didn't match. However, I was unable to solve the problem and determine which program (if it is one) that is causing this slow down.

Any help would be greatly appreciated.
Thanks.

Information

Network Adapters -

Qualcomm Atheros AR9485WB-EG (Updated to most recent drivers)
Realtek PCIe FE Family Controller (Updated to most recent drivers)

A:Connection Speed Cut by Half (But not in Safemode)

A free utility such as LookInMyPC will create a report. This can be limited to Services. The report is a table with the service names, status, and start type. It's easier to compare hard copy and cross off the ones running in safe mode from the standard mode list.

Note if you can't print from safe mode just wait until booted into standard mode to print out the table. Save to desktop or whatever.

Read other 12 answers
RELEVANCY SCORE 50.4

Hello,
My installation of Firefox was running fine, then slowed down my internet connection to less than 1mbps. I have done clean install several times and installed an older version 3.6, then the newest version. I made a point of saving my profile folder (renamed so it didn't cause a conflict), but cleaning out all other files. The new install tests about 3+mbps and when I re-test a second time (within minutes) It is down to 1mbps. This happens over and over.
IE is installed and it consistently runs at 3+mbps. Can anyone suggest a solution?
Jeff
 

A:When Using Firefox My Internet Slows down Over Half.Speed

How is Firefox behaving in Safe Mode?

How to Start Firefox in Safe Mode
 

Read other 2 answers
RELEVANCY SCORE 50.4

Hello ....
every time i download something ,the internet speed start very good sometimes its 6 Mb and sometimes its 1 Mb
this is an example :
and after 40 seconds or more its dropped to the half to 50 KB :

this problem is so annoying :'(

driver of network card is updated :
ipconfig /all :
screenshot of xirros :
guys sorry if u want more information about the problem tell me and ill answer quickly . i showed u all the information i know .

and thanks a lot i appreciated so much

A:Why my internet download speed drops to half

no one commented

Read other 5 answers
RELEVANCY SCORE 50.4

On my laptop the internet speed is fine when it is being charged but becomes half of it or less when its running on battery. Downloads take twice the time and videos buffer slowly.

I tried contacting HP but they never come to help in chat support and their forums are too confusing to ask in. Please help me solve this issue.

A:Internet speed becomes half when laptop is not charging

It will be a power setting which reduce power for CPU wireless etc to give most battery life

Read other 2 answers
RELEVANCY SCORE 50.4

I recently upgraded to windows 2000 from 98 and my computer began running at half the speed. Next I restored 98 using a restore CD and installed 2000 side by side with 98 so I now have 2 operating systems running. In 98 mode, my computer runs at normal speed, 400 mhz. In 2000 mode, it runs at half speed because my front side bus is running at half speed. In 2000 mode, it says my FSB is only 49 mhz while in 98 it reports to be 100 mhz which is the actual speed. Any clues? IBM aptiva 400 mhz, 64 MB RAM, putting in more RAM does not help.
 

A:windows 2000 makes cpu run at half speed

Please don't duplicate post, reply here:

http://forums.techguy.org/showthread.php?s=&threadid=110709
 

Read other 1 answers
RELEVANCY SCORE 50.4

Hi guys, a few weeks ago there was a huge lightning storm. the powerline outside my house was struck by lightning and now my internet is half the speed it used to be on downloads. we have changed the power adapter for the modem but still the same issue. I also can no longer use ethernet on my PC since the lightning strike. we've tried ringing our ISP but they said everything was fine.
 

A:Lightning strike, internet now half speed.

Read other 6 answers
RELEVANCY SCORE 50.4

When plugged in via ethernet I can get about 35 megabit but when going wireless, I'll be lucky if I hit 14 megabit. I have a linksys e2500 router with the latest firmware. I have tried 2 different wireless cards one usb (TP-link n150) and a PCI-e (asus pce-n15), both with the latest drivers available. With the Asus my connection is a steady 5 bars, at 144.5 Mbps. I am in an apartment complex so there are a lot of other signals around me but I have tried to select the best channel I can with the least amount of overlap I can. Anyone have any ideas about some hidden router settings that might throttle speeds? Any help would be greatly appreciated!

Oh and I'm running windows 7 64bit
 

A:Solved: Wireless half the speed of ethernet

Read other 15 answers
RELEVANCY SCORE 50.4

My pc is runnin at like half speed. i tried doin a virus and spyware scan and it found a Win32 trojan downloader.qoologic or something, i suspect that thats the problem, cause like everything opens up slow and my games all run at like 10-12 fps instead of about 20-30 fps.
What the hell is its problem, need help!!!!!!

My pc has 3.0GHz
1 GB RAM
9600 Ati
by all rights it should be better then it is at the moment
 

A:my pc is runnin at like half speed wat the hell is wrong?

Read other 16 answers
RELEVANCY SCORE 49.6

Hey, i recently received a brand new Huawei router from TalkTalk a few weeks ago and since we started using it my download speed has been roughly half of what it used to be (700kbps down to 380kbps) and i find i have almost no bandwidth.

Also when i download games on steam, the download speed acts in an erratic pattern. Steam says it jumps to about 600kbps and then drops to about 200kbps, meets in the middle at about 400kbps and then starts over again.

As well as this new speed drop, i have an issue which has been present for years now.
No matter what i do in the router settings, all of my ports are aparently closed even though i have uPNP enabled (I used This To Check) At first i thought it was our terrible old belkin router, but this Huawei gives exactly the same results...

I used the program Open ports viewer and it showed me a bunch of ports listed as "Listen" "Established" and "N/A" but none of them were for my Pc's remote address.

Can anybody shed some light on my situation? Even an explanation of why TalkTalk internet is **** or why my router started launching Chinese rockets at me would be appreciated.
 

Read other answers
RELEVANCY SCORE 49.6

I have a peculiar issue with wifi on Windows 10. My computer shows a wifi link speed of 270 Mbps and i have tested the same by sending huge files over my network. Now the issue is that i strongly believe that something in Windows 10 is throttling the internet speeds drastically. I am only getting half of the subscribed download speeds on my Windows 10. I have other devices/phones connected to the same wireless network and they are getting full speeds!

I have tried several things but i am unable to achieve full download speeds on my Windows 10. This has been affecting me for the past around 15 days. Prior to that things used to be normal.

Any clue guys? Because if nothing works then i may have to downgrade to Windows 7

Thanks

A:Full Link Speed but Half download speeds!

bump

Read other 0 answers