Over 1 million tech questions and answers.

Problem with audio recording program (Entry Point Not Found)

Q: Problem with audio recording program (Entry Point Not Found)

Ok,this one is wierd. I just installed winXP Home on a new hard drive, and downloaded this program:

http://www.download.com/Audio-Record...ml?tag=lst-0-1

When I open the program I get this Error

"The procedure entry point WMCreateSyncReader could not be located in the dynamic link library WMVcore.DLL."

This program worked on my computer fine with my old hard drive and it still works fine on my buddy's laptop. Not sure where to go from here...

RELEVANCY SCORE 200
Preferred Solution: Problem with audio recording program (Entry Point Not Found)

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Problem with audio recording program (Entry Point Not Found)

Have you installed Windows Media Player yet? This should fix the codec problem. If that doesn't work, try installing the Windows Media Audio 10 Pro (Windows XP) codecs, then reboot.

Read other 1 answers
RELEVANCY SCORE 94.8

I uninstalled ZoneAlarm Firewalla and now strange things happens...............

rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll

Whenever i log in to windows i get

userinit rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll

winlogon rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll
When i right click "MY PC" i get
rundll32.exe - Entry point not found
The procedure entry point LdrResfindResource could not be located in the dynamic link library ntdll.dll

I tried sfc /scannow without any success :/

A:rundll32.exe - Entry point not found The procedure entry point LdrResfindResource could not be located in the dynamic link libr...

You currently have an open Malware Removal Logs citing same issue, http://www.bleepingcomputer.com/forums/topic473316.html .

Since you have the open malware topic, we request that you pursue that and resolve any/all issues there...before proceeding with a topic in a different forum, citing the same issues.

At the conclusion/resolution of your MRL topic...you should then initiate a topic in the appropriate forum for any system issues that you may then have.

To avoid confusion, this topic is now closed.

Louis

Read other 1 answers
RELEVANCY SCORE 87.6

Hello,
 
I'm new to this community. I've read many topic based on this title 'Entry Point Not Found'. Actually i can't open my half of the file due to this which is either link on internet.
Using window 7 32bit. This problem happened when i update my Windows via Windows update. I tried to update the window again but nothing, still the error.
Message Showes is 'The Procedure entry point (Of somthing) could not be located in the dynamic link library WININET.dll'.
I tried sfc /SCANNOW in the command prompt but it shows
 
'Beginning verification phase of system scan.
Verification 100% complete.
 
Windows Rescource Protection did not find any integrity violations.'

A:Entry Point Not Found Problem

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

Read other 4 answers
RELEVANCY SCORE 86.8

I'm trying to find out why a Windows 2000 machine has the error "The procedure entry point RtlUnhandledExceptionFilter could not be located in the dynamic link library ntdll.dll." As of now, I guess it is related to uxtheme.dll. According to what I have found, uxtheme.dll is for Windows XP and Windows 2003. Is that any application which will install uxtheme.dll onto a Windows 2000 machine?
 

A:Entry Point Not Found problem for ntdll.dll

1. Search for the file UXTheme.dll.
2. If found, rename to Uxtheme.old

There are many 3rd parties programs that install that file: ex: Trillian.
 

Read other 3 answers
RELEVANCY SCORE 77.2

I keep on getting a popup everytime I turn on the computer... That reads ONENOTEM.EXE Entry Point not Found.
The procedure entry point OpenSemaphoreW could not be located in the dynamic link library api-ms-win-core-synch--I1-2-0.dll.

What does this message mean and how can I fix it. I tried fixing my computer in the startup options and I also installed a new OS. However this problem is still here. Thank you!

Read other answers
RELEVANCY SCORE 77.2

After the Windows 8 Update, I get the following message when I log in;

dwm.exe - Entry Point Not Found

[red circle with white x in it]

The procedure entry point CheckDesktopByThreadId could not be
located in the dynamic link library C:\WINDOWS\system32\dwm.exe.

A few days before update I installed Office 2013 Preview.
I use Windows8 since the consumer preview without problems on my Lenovo S10-3 with the following specs;
Intel Atom dual core processor @ ~1,7GHz
1GB RAM
Much more isn't in it XD.

I had also made some small changes in the Registry to change the max resolution, but I did that in June and I didn't had any problems with my laptop until now.

A:dwm.exe - Entry Point Not Found

Someone? It happened after the October update.

Read other 4 answers
RELEVANCY SCORE 77.2

hello. i recently purchased and installed cycling '74 max/msp v4.5.2 and i got this error. the title reads "max.exe - Entry Point Not Found" and the dialog is "The procedure entry point PifMgr_OpenProperties could not be located in the dynamic link library SHELL32.dll." my only option is to click OK which closes the program before it has a chance to start. i went to the companys support and they assumed it was a problem with my system so i checked by installing on a friends computer and it worked perfectly. i have no idea what could be wrong since both our systems are almost identical (P4 2g, winxp). does anyone know what this means or know how to fix this? thanks for any help.
 

A:max.exe entry point not found

Read other 13 answers
RELEVANCY SCORE 77.2

For the past couple m onths, I have been having boxes pop up midscreen that say

"WLANmon.exe-Entry Point Not Found
The prodecude entry point apSearchInterface could not be located in the dynamic link library wlanapi.dll"

and

"WZCSLDR2.exe-Entry Point Not Found
The procedure point apsInitialize could not be located in the dynamic link library wlanapi.dll"
Can someone tell me what these mean? And how to fix them? I've just clicked "ok" every time because I have no clue what to do. Thank you for the help in advance

A:entry point not found

Hello have you around that time removed a bit of malware or upgraded to say SP3?

Read other 6 answers
RELEVANCY SCORE 77.2

For the last past few days, I have been getting the errors saying that "The procedure entry point setupapi.CM_HW_Prof_FlagsA could not be located in the dynamic link library CFGMGR32.dll".
2 of these pop-up evey hour or so. First one with a title "random number.exe - Entry Point Not Found" and second one with a title"41.exe - Entry Point Not Found". The second ones are always 41.exe. The error message is same on both errors.
How do I fix this?
 

A:Entry Point Not Found?

Better run Ad-Aware and Spybot to check for malware. But for those specific errors, have you searched for the files? See if you can find them, check their properties, and try deleting them. You can restore them if you don't empty the trash.
 

Read other 3 answers
RELEVANCY SCORE 77.2

I uninstalled some software (Media Shout) then reinstalled it. When I tried to start the program I got the following error:

Entry Point Not Found
The procedure entry point [email protected]@@[email protected]@@Z could not be located in the dynamic link library ExplorerExt.dll

Did a Google search for the ExplorerExt.dll and found nothing. Any ideas as to what caused this error, or how to fix it?

Thanks,
 

A:Entry Point Not Found

Hiya

Did you uninstall it due to any problems with the program?

When you uninstalled Media Shout, did you delete the folder in the Program Files, via Windows Explorer? If not, uninstall again, delete it (leave in Recycle bin), reboot and install again.

If still no joy, if you go to Find Files and Folders, can you find ExplorerExt.dll?

Regards

eddie
 

Read other 1 answers
RELEVANCY SCORE 77.2

Every time I try to open system restore I get 'the procedure entry point RemoteAssistancePrepareSystemRestore could not be located in the dynamic link library WINSTA.dll

I have tried to open system restore all through the computer but it will not allow me too. Also I am having problems updating my computer. It says that I have installation files missing. All this happened when I tried to install systemworks and also Nero. I also tried to udate XP using the CD. Nothing works. I still get the pop up. When I run regsvr32 WINSTA.dll another pop up comes that the WINSTA.dll was loaded but that the DllRegister Server entry point was not found. This file can not be registered.
When I find a system restore folder, I am not able to access it.
I have tried to go to my computer and disable the system restore tab on all the drives, but the pop up comes up.
 

A:entry point not found XP

Read other 16 answers
RELEVANCY SCORE 77.2

error message shows
Startup monitor.exe Entry Point not found

The procedure entry point reinitializing critical section could not be located in the dynamic link library Kernel 32 dll
 

Read other answers
RELEVANCY SCORE 77.2

Hello,

I just had my hard drive replaced because windows would not load up and was told it was because of failure of my hard drive. That being said, I am getting an error message as soon as Windows loads up: "Smart Bridge Alerts: Motive SB.exe. The Procedure Entry Point Get Process Image File Name W Could Not Be Located in the Dynamic Link Library PSAP1.DLL"

I don't have the slightest idea what this means, nor how to fix it. Please Help!! After I click OK and close the dialog error box, Windows continues, but I'd like to know how to fix this problem. Thanks a bunch.
 

A:Entry Point Not Found

Read other 6 answers
RELEVANCY SCORE 77.2

I am running XP Pro x64 and ever since I started my computer this morning I cannot access any 32 bit programs without recieving a simular error "The procedure entry point _except_handler3 could not be located in the dynamic link library msvcrt.dll." the only reason I am able to post this is because I am using Internet Explorer x64 . and luckly my firewall is 64bit I have never seen this happen before and am wondering how to fix this

A:Entry Point Not Found

See if this gives you more information:http://support.microsoft.com/?scid=kb%3Ben...p;x=17&y=12

Read other 1 answers
RELEVANCY SCORE 77.2

Hello,

I'm not sure if this is the right forum or not. I do not believe this is a spyware/virus issue, so please direct me to the right place, if I am wrong.

The computer in question is my aunt's, and she always calls me with "the kids broke it again." Usually it's simple stuff that if they had read the install instructions on the program they were using, they would figure out themselves or some spyware that's screwing up Itunes.

This time it looks like this computer is totally screwed, and it's totally beyond me. Can someone please take a look and tell me if this is something I can be walked thru here, or do they need to take it to a Pro?

-Apon loading Windows Xp, this error pops up:
"SmartBridge Alerts:MotiveSB.exe Entry Point Not Found
The Procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL"

Googling the error, I came across some threads about it being a conflict with IE7, which they apparently updated to right before the computer started acting up.

Other symptoms are as follows:
-There are no icons on the screen. Right clicking on the Desktop gives no response at all.

-I forgot to write down the icons that are loaded on the startup toolbar, but I think they were: Itunes, Yahoo Protection, AVG, and the SBC rocketship.

-The wireless mouse acts skitzo. As if it's stuck on something.

Clicking on most of the programs at Start results absolutely nothing with the exce... Read more

A:Entry Point Not Found

How can u b so sure that its not a problem of Virus/spyware???

All the processes u have posted is fine...

You should do a thorough scan for both Virus and Adware....
n then
Download and Run Registry Mechanic
http://www.computeractive.co.uk/vnun...try-mechanic50

Read other 3 answers
RELEVANCY SCORE 77.2

When I turn on my computer I get a Smart Bridge Alert:Motive SB-Entry point not found. The procedure entry point Get Process Image File Name W could not be located in the dynamic link library PSAPI.DLL

A:SB-Entry point not found

You can download and run diagnostics from your hard drive manufacturer to rule out drive failure . . suggest you first back up any data your cherish

Read other 2 answers
RELEVANCY SCORE 77.2

I can only launch programs that come with windows then like Microsoft Edge , File Explorer, and everything like that. Whenever I try to launch and other software it says "The procedure entry point NtSetHighWaitLowEventPair could not be located in the dynamic link library C:\WINDOWS\system32\wow64.dll" PLease help I have Windows 10, a desktop PC and I have done virus scans and all that it started happening all of a sudden.
 

A:Entry Point not Found

welcome to the forum

was the virus scans clear?
...also run a SFC scan.
System File Checker is a utility available in Windows 10 that checks for system file corruption. It's recommended for advanced users. To run it:

Right-click (or press and hold) the Start button, then select Command Prompt (Admin).
Enter sfc /scannow (note the space between "sfc" and "/").
from this link:
http://windows.microsoft.com/en-us/windows-10/using-system-file-checker-in-windows-10
 

Read other 1 answers
RELEVANCY SCORE 77.2

On boot up, many startup programs fail to load and a message box is displayed, such as:reader_sl.exe - Entry Point Not FoundThe procedure entry point could not be located in the dynamic link library KERNEL32.dllOnce the message box is dismissed, another startup program reports the same error.Finally, no more message boxes are displayed.However trying to start Word or Excel does the same thing...WINWORD.EXE - Entry Point Not FoundEXCEL.EXE - Entry Point Not FoundTrying to search for a solution, many similar problems were solved by removing a virus or malware. I ran scans using Avast! and Trend Micro House Call, but no problems were detected.I tried following the instructions at this forum's "Preparation Guide for use before posting about your potential Malware problem"However, when trying to run gmer.exe, it crashes each time. One time the computer crashed and restarted.Any help would be appreciated.DDS (Ver_09-12-01.01) - NTFSx86 Run by Joanne at 7:46:18.73 on Fri 02/12/2010Internet Explorer: 8.0.6001.18882 BrowserJavaVersion: 1.6.0_17Microsoft? Windows Vista? Home Premium 6.0.6002.2.1252.1.1033.18.2046.138 [GMT -8:00]AV: avast! antivirus 4.8.1368 [VPS 091219-1] *On-access scanning enabled* (Updated) {7591DB91-41F0-48A3-B128-1A293FD8233D}SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}SP: avast! antivirus 4.8.1368 [VPS 091219-1] *enabled* (Updated) {7591DB91-41F0-48A3-B128-1A293FD8233D}============== Running Pro... Read more

A:Entry Point Not Found

Resolved the problem using the System File Checker as instructed in the following Microsoft Knowledgebase Article:How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7http://support.microsoft.com/kb/929833The System File Checker was not able to repair a Microsoft C Runtime Library:C:\Windows\winsxs\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4016_none_d0893820442e7fe4\msvcr80.dllI compared a copy of this file from another computer and found they were different. I followed the instructions for taking ownership and granting permissions to the file then replaced it with the good copy.Once this was completed, I rebooted and everything worked as expected...no more Entry Point Not Found message boxes.Not sure how this file got corrupt...no evidence of a virus or other malware.

Read other 4 answers
RELEVANCY SCORE 77.2

Every time I open Mozilla Firefox, I am greeted with this error message.

http://img8.imageshack.us/img8/5422/errorwk.png

Additionally, I get the same error message when I start the game Mythos on my computer, except replace where it says cmdinstall.exe with Mythos.exe.

I am currently running Comodo Internet Security for antivirus and firewall protection, and believe that is what the cmdinstall.exe pertains to.

Does anyone have any suggestions as to how I may be able to fix this error? Thank you.

A:Entry Point Not Found

Block MS Updates temporarilly, go back to a Restore Point before this happened, and then do some research on interferance of new Updates with Firefox or that game.

Read other 1 answers
RELEVANCY SCORE 77.2

Eh... yeah, this is bad. I don't have a good feeling about this. So yesterday, I went to bed fine, my computer was great. I leave it running usually. I wake up... I can use everything normally, that was opened. I didn't try to run a new .exe file.

So I was using Firefox fine, and msn too. Then, I wanted to watch a video with media player classic, and I get an entry point not found error. Notibly I was concerned, but I figured it was just a corrupted file within the realm of the media player, not my computer.

So, I decided to try and open up taskmanager. As soon as I do, this is the error I get "

The procedure entry point NdrtypgUnmarshall could not be located in the dynamic link library RPCRT4.dll." Also, something to note, is that if I click okay on the error, it just pops back up, so I can't get rid of it. My cursor has also returned to the original version, (I'm using cursorXP).

I went to system32 to check if I still had the .dll file, or if it had somehow been edited, and nope, it's still there, and it seems untouched. What on earth is going on? How can such a huge error pop up overnight without me doing anything?

Also one more thing, some programs that are already open, such as AVG, will not give me an error when I try to run something within them, merely nothing will happen. I can't use my control panel, either...

A:Entry point not found?

Hello Exavion

I think you have a malware infection

Please follow our 5 Step process outlined here:

http://www.techsupportforum.com/secu...oval-help.html

After running through all the steps, please post the requested logs in the HijackThis Log Help forum.
http://www.techsupportforum.com/secu...this-log-help/

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please be patient when waitung for a reply. This forum is very busy and someone will help as soon as possible.

Thanks

Read other 4 answers
RELEVANCY SCORE 77.2

Left my computer on earlier today when I went out and came back to a prompt on the screen saying

ihf.exe - Entry Point Not Found
The procedure entry point MSWSOCK.MigrateWinsockConfiguration could not be located in the dynamic link libraby WSOCK32.dll.

None of the programs I have tried to run will work and the computer won't even connect to the internet.

Please help...

A:ihf.exe - Entry Point Not Found

Hello fastred04R1 Can you download and eun these off a Flash drive or CD?Save mbam-setup.exe to a flash,usb,jump drive or CD. Now transfer it to the infected machine, then install and run the program. If you cannot transfer to or install on the infected machine, try running the setup (installation) file directly from the flash drive or CD by double-clicking on mbam-setup.exe so it will install on the hard drive.Full instructionsNext run MBAM (MalwareBytes):Please download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1 <<<== Use this one first.Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically u... Read more

Read other 10 answers
RELEVANCY SCORE 77.2

I have a problem with my windows media player. Whenever I try to load or play it, I get the messege that follows:"Setup_Wm.exe - Entry Point Not Found The procedure entry point GetUserGeoID could not be located in the dynamic link library Kernel32.dll". This is on a Win2K AdvSvr Edition. Help! Help!!
 

A:entry point not found

Read other 9 answers
RELEVANCY SCORE 77.2

My screen and icons were large. I went to reboot my computer (I have WIndows XP) and I am getting an error message. It says "Isass.exe Entry Point Not Found". Then it states "The procedure entry point_resetstkoflow could not be located in the dynamic link library msvcrt.dll" I then click okay and the screen is black. Nothing happens. I rebooted and got the same error but instead of saying Isass.exe, It says services.exe.
I don't know what to do. I cannot even get into my computer at all. I am using a different computer right now.
Please help. I hope this is somthing that is fixable and I hope somebody is familiar with this.
I have put in search terms with different terms in the error message and have come up empty handed each time.
If anyone can help, "thanks" in advance!

Cathy421
 

A:Entry Point Not Found

Read other 14 answers
RELEVANCY SCORE 77.2

Hi all,

Brand new here, and I look forward to your help.

I have athlon xp 1900+ processor, and was running xp sp3. The computer was just getting slower and slower over time, and I decided to try running a virus scan in safe mode. When I tried rebooting and hitting F8, it still booted normally, and never gave me the safe mode options. So I used system configuration to change boot.ini to safe mode.

When I then rebooted, I got the endless reboot cycle. I then got out my Windows installation disk, selected install windows, and when it recognized a previous installation, I chose Repair.

During the (lengthy) repair process, I got messages telling me that the following two files were either corrupted or didn't install:

Windows\system32\inetcomm.dll
ProgramFiles\OutlookExpress\msoe.dll

Then it told me that Windows MediaPlayer needed to be reinstalled, and I chose to do it manually later.

Now, I am able to boot up normally, but of course it's now Windows XP sp1, with no updates yet. My computer is connected to the internet (I can tell because I'm logged in to LogMeIn, and I was able to update my Spybot definitions), but I can't open Internet Explorer. I get the error message titled "iexplore.exe - Entry Point Not Found". The message says, "The procedure entry point SetDllDirectoryW could not be located in the dynamic link library KERNEL32.dll"

When I try to log into Windows Live Messenger, I get two of those messages, one referencing... Read more

A:Entry Point Not Found

First go to Start/All Programs and click the shortcut at the top to go to Windows Update, see if that works. If not, Go to Start/Run and type SFC /scannow and hit enter. The Windows File Protection window pops up. You may need to put in your XP disc. It will now try and copy and missing system files from the disc (make sure it is clean of any smudges, or scratches). If this doesn't work try it with another XP disc that is the same version (Pro, Home or MCE)

Read other 13 answers
RELEVANCY SCORE 77.2

Hello,

I posted this also in the Windows XP forum, because I do not believe that this is a spyware/virus issue, but the only reply I recieved wasn't very useful and suggested that it was a spyware/virus related.


The computer in question is my aunt's, and she always calls me with "the kids broke it again." Usually it's simple stuff that if they had read the install instructions on the program they were using, they would figure out themselves or some spyware that's screwing up Itunes.

This time it looks like this computer is totally screwed, and it's totally beyond me. Can someone please take a look and tell me if this is something I can be walked thru here, or do they need to take it to a Pro?

-Apon loading Windows Xp, this error pops up:
"SmartBridge Alerts:MotiveSB.exe Entry Point Not Found
The Procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL"

Googling the error, I came across some threads about it being a conflict with IE7, which they apparently updated to right before the computer started acting up.

Other symptoms are as follows:
-There are no icons on the screen. Right clicking on the Desktop gives no response at all.

-I forgot to write down the icons that are loaded on the startup toolbar, but I think they were: Itunes, Yahoo Protection, AVG, and the SBC rocketship.

-The wireless mouse acts skitzo. As if it's stuck on something.

Clicking on most of the programs ... Read more

A:Entry Point Not Found

Hello BeaGuav:


Please download HijackThis . This program will help us
determine if there are any spyware/malware on your computer. Double-click on the file you just downloaded. Click
on the "Unzip" button to install. It will by default install to the directory - C:\PROGRAM FILES\HIJACKTHIS\
Run a scan and save the log file. Do not fix anything in HijackThis since they may be harmless.
Make sure to include the System information at the top of the log as well.


Post your HJT log in this thread.

I see you have a wireless mouse (check the batteries). Do you also have a wireless keyboard? Some systems won't boot into Safe Mode with a wireless kb.

Read other 3 answers
RELEVANCY SCORE 77.2

Eh... yeah, this is bad. I don't have a good feeling about this. So yesterday, I went to bed fine, my computer was great. I leave it running usually. I wake up... I can use everything normally, that was opened. I didn't try to run a new .exe file.

So I was using Firefox fine, and msn too. Then, I wanted to watch a video with media player classic, and I get an entry point not found error. Notibly I was concerned, but I figured it was just a corrupted file within the realm of the media player, not my computer.

So, I decided to try and open up taskmanager. As soon as I do, this is the error I get "

The procedure entry point NdrtypgUnmarshall could not be located in the dynamic link library RPCRT4.dll." Also, something to note, is that if I click okay on the error, it just pops back up, so I can't get rid of it. My cursor has also returned to the original version, (I'm using cursorXP).

I went to system32 to check if I still had the .dll file, or if it had somehow been edited, and nope, it's still there, and it seems untouched. What on earth is going on? How can such a huge error pop up overnight without me doing anything?

Also one more thing, some programs that are already open, such as AVG, will not give me an error when I try to run something within them, merely nothing will happen. I can't use my control panel, either...

Also note that I am using windows xp professional
 

A:Entry point not found

Read other 16 answers
RELEVANCY SCORE 77.2

When I click on my Wordpad I get a message that reads:

wordpad.exe Entry Point Not Found

The procedure entry point SHRGetValueW could not be located in the dynamic link library SHLWAPI.dll

How can I get my Wordpad back? I have a Dell 8200 w/ Win. XP, should there be a cd or something I can use to reinstall it, or maybe some how download a new entry point SHRGetValue?

I don't know if the problem is with Wordpad or the dynamic link library or what the heck is going on? Can you help?
 

A:Entry Point Not Found

I would uninstall/reinstall WordPad and see if the error repeats itself. If it does, the shlwapi.dll file might be corrupted. You could fix it by extracting a new copy from the Windows CD, or installing the latest Internet Explorer security update.
 

Read other 1 answers
RELEVANCY SCORE 77.2

Hi everyone,

I keep getting this error message when I boot up occasionally. It says-

"The procedure entry point_crtCreateSymbolicLinkW could not be located in the dynamic link library C:\Program Files(x86)\Norton Security\Engine64\22.7.1.32\MSVCP110.dll"

The image shows what I see on my desktop immediately after I enter my password.

Does anyone have any idea how I could go about this? It doesn't seem to affect the general running of my PC.
Thanks in advance.

Read other answers
RELEVANCY SCORE 77.2

rundll32.exe - entry point not found!
Click to expand...


the procedure entry point GetProcessImageFileNameW could not be loacated in the dynamic line library PSAPI.DLL
Click to expand...
well this message always come up in most of the program i open!
the message started to come out when i accidently install the the window nt driver ( 3d card driver[ msi 8800 tnt 2 m64 ]) in my window xp sp2?

but it always caosing the program to not reponding!!
making my head big!
Some one know how to fix it...
i already uninstall the driver.. and intall the right driver!!
but the problem still there!!

or there is something happend.. and i dont know??
 

A:Entry point not found

just looked on google says run all anti spy u have if still no good try start run type sfc /scannow may ask u 4 windows disc if u do not have it available on c drive
 

Read other 1 answers
RELEVANCY SCORE 77.2

Hello Everyone, Hope I'm posting this in the correct place. If not I appologize.

Ok, I have always used a program called Viber on my pc. For those unaware it's just basically a messanger that works on phone and pc. Anyways I've never had a problem with it. It would always run with no problems at all. But last night I uninstalled it because I was having trouble getting pictures from it.

So I reinstalled it but now when i try to open Viber I get a pop up window that says.. "The Procedure entry point if_indextoname could not be located in the dynamic link library iphlpapi.dll" So now Viber will not open cause of this.

I've never gotten this message before with any programs, definantly not with Viber. I did a bunch of googling, only found 1 site that claimed Speedy PC Pro could fix dll problems. But I read many bad things about that program and dont want to risk it.

How can I fix this? Any help would be greatly appreciated.

A:The Entry Point Not Found?

Hi did you try a system restore to a point prior to you removing Viber.

Read other 15 answers
RELEVANCY SCORE 77.2

The message I'm getting is the following
Norton Antivirus:navapw32.exe-Entry Point Not Found
the proceure enrty point? [email protected]@[email protected] could not be located in the dynamic link library SymRedir.dll.

This when my windows(xp) is starting back up.
Can someone help????
 

A:Entry Point Not Found

Here's Symantec's solution (I found this by using Google and searching for "[email protected]@[email protected]").

http://service1.symantec.com/SUPPORT/nav.nsf/docid/2001091211120006&src=n
 

Read other 1 answers
RELEVANCY SCORE 77.2

I get this error when I try to access the manage computer or device manager.

MMC.EXE - Entry Point Not Found
The procedure entry [email protected]@[email protected]@[email protected] could not be located in the dynamic link library mmcbase.dll.

The only changes i've made was update to SP3. It seems to have started sometime after that.

A:MMC.EXE - Entry Point Not Found

Hi gr00m,

just found this:
http://www.winforums.com/showthread.php?p=67718

If you scroll down you will see a resolution is to uninstall SP3 and the reinstall using the standalone version.

Hope that helps

Read other 3 answers
RELEVANCY SCORE 77.2

I've installed Canon Creative For Windows on my PC(windows xp) and all of it works except for Design Essentials. When I try to open it, I get a message that says... designe.exe-Entry Point Not Found
The procedure entry point_adjust_fdiv could not be located in the dynamic link library MSVCRT20.dll.
Did it install correctly? Is there some way I can remedy this?
 

Read other answers
RELEVANCY SCORE 77.2

I updated a game console and received this message: Game Console -wt.exe-Entry Point Not Found the procedure entry point TF_ClearLangBarAddins could not be located in the dynamic link library MSCTF.dll, I am puzzled as to how to repair the problem. I am a novice with computers. Please Help!!! Thanks soooo much!!

A:DLL entry point not found - please help

Run system restore - choose a restore point prior to update -
START | type rstrui

You would need to contact game app manufacturer and make inquiry about INOP update.

Regards. . .

jcgriff2

`

Read other 2 answers
RELEVANCY SCORE 76.4

Hi,
I've been searching the internet for the past 4 hours trying to find a solution for this. The only thing i've been able to find are posts for people requesting help without and replies... I really don't want to reformat my HD because I have alot of files that i would rather keep than not. This is a post from someone else somewhere else that has/had my problem but it describes the exact problem that I have(Any and all information that could be provided to save my computer from death would be greatly appriciated)
:

Quote:
I'm upgrading my XP Home system to XP Pro. I've
encountered the following error:

unregmp2.exe Entry Point Not Found
The procedure entry point GetIUMS could not be located in
the dynamic link library MSDART.DLL


My only option is to click OK, and the error immediately
recurs. I've clicked OK over 100 times and am still at
that spot. Any ideas?

End of quote.

Also... I've tried to reboot the machine to see if it would just make it go away... In the very beginning the problem started at 13 min before the installation was complete. After the installation It has since then moved itself up to 34 min. I don't know why this is... Please help
,Ian
 

A:unregmp2.exe entry point not found

zianac,

have you tried doing this

When the problem occurs, press Shift +F10 to bring up the
command prompt. Then type taskmgr.exe in the DOS window
and press Enter. The Task Manager should be started. If
not, try to press C+Shift+ESC. In the Task Manager
program, select the error messsage window in the
application list and click "End Task". In the process
list, terminate the unregmp2.exe program. Exit the DOS
prompt window and resume the installation process

I found the possible solution here http://www.mcse.ms/message297206-3.html

Let us know if that works for you
& welcome to TS:wave: :wave:
 

Read other 6 answers
RELEVANCY SCORE 76.4

Hi,

Recently this error popped up, "The procedure entry point SsoCredentials could not be located in the dynamic link library DialogManager64.dll."

This appears at Windows logon, either when I boot my machine or lock my computer.

What's this and how do I go about fixing it?

Read other answers
RELEVANCY SCORE 76.4

After installing Mercury Loadrunner Testing Tool, asks for reboot winxp. But after restarting get this error message "miregsvr.exe - entry point not found" "The procedure entry point mxdr_clone_p_aes_string...could not be located in aes.dll". When manually registered the dll shows a processing window "completing setup...." and with the error mesage "File C:\Program Files\..\Mercury Loadrunner\bin\aes.dll is missing entry: "ProductName" in Section: "General""

Checked microsoft error library, did not help.
Can anyone say why this error and its work around.
 

Read other answers
RELEVANCY SCORE 76.4

Hi everyone,

I have a dual core e2140 with 1gb ram,I have just install the OS of XP pro sp2,after all the installation it goes to the windows desktop and the remark of :"outin.exe - entry point not found,The procedure entry point ShutdownBlockReasonDestroy could not be located in the dynamic link library User32.DLL"

I have tried using registry seeker to clean the registry but still the same remark comes out.

I turn on the PC then shut off but when on to the desktop again the remark appears.

Hope someone can help me. Thank you very much.
 

A:outin.exe-entry point not found

What is "outin.exe" > Search For it > Where is it Located ... To what it Belongs ??

Start > Run > msconfig > Startup Tab > uncheck anything related to "outin.exe"
 

Read other 2 answers
RELEVANCY SCORE 76.4

Hello, got this problem on my HP laptop.

Anyone please can help me with this? pop up every 5 mins.
 

A:service.exe Entry point not found

C:\ProgramData\Windows\ does not exist on my reference machine running Win 10 Pro version 1809. You might have been hacked.
 

Read other 9 answers
RELEVANCY SCORE 76.4

hi guys,
i have an issue with newdev.dll file. what was i trying to do: i uninstall and re install a modem on win xp pro sp2. then i got this error:
error loading newdev.dll
i found from wep and replaced the newdev.dll and run the regsvr32 /newdev.dll
but its come up with different error says:
"newdev.dll was loaded, but the DLLRegisterServer entry point was not found
any one knows how to fix this??
thanks
 

A:DLLRegisterServer entry point was not found

Read other 7 answers
RELEVANCY SCORE 76.4

Does anyone know a solution to fix this firefox error: ****FIREFOX.EXE- Entry Point Not FOund**** The procedure entry point NS_Alloc could not be located in the dynamic link library xpcom.dll. Any assistance would be much appreciatedModerator Edit: Moved topic to the more appropriate forum. ~ Animal

A:Firefox.exe- Entry Point Not Found

Hi K()nT3nTs,I would first create a new Profile and see if the problem exists in it. Close Firefox and end tasks of any Firefox processes still running via ctrl/alt/del.Your plugins and Add ons should work in your new profile just like they did in the old one. They are installed in a directory housed in the Mozilla Firefox app folder.Locating, Creating and Backing up Your Profile Folder in Firefox.More Tips About Profiles.

Read other 1 answers
RELEVANCY SCORE 76.4

Hi Everyone:

Having errors coming up and don't know whether its due to Windows XP, hardware, software, etc. so I'm starting with XP.

First one is when the computer is started and comes up after I have logged on. It reads:

Hpqthb08.exe - Entry Point Not Found
The procedure entry point GetProcessImageFileNameW could not be located in the Dynamic Link Library PSAPI.DLL

Next one was when I tried to access internet properties by right clicking on internet shortcut and then clicking Properties. It reads:

Rundll32.exe - Entry Point Not Found
The procedure entry point GetProcessImageFileNameW could not be located in the Dynamic Link Library PSAPI.DLL

Next is when I try to go into Norton Internet Security Center. It Reads

Norton Internet Security: Cfgwiz.exe - Entry Point Not Found
The procedure entry point...........same as the others.

Thought it might be a Norton problem so uninstalled through Add/Remove programs and installed McAfee. Error I got when I tried to access McAfee Security was

Mvtapp[1].exe - Entry Point Not Found
The procedure entry point.......

Uninstalled McAfee and tried to reinstall through their website and again by disk and got

McAfee CD Setup: CDSetup.exe Entry Point Not Found
The procedure entry point....

Uninstalled McAfee again and reinstalled Norton got the same Norton error.

The Norton internet security is not working and am having to rely on Windows Firewall.

This error has also come up when accessing other programs.

Computer ... Read more

A:Entry Point Not Found Errors

At first glance, it appears to me that many of these errors come about when user is attempting to install/use older software on XP. But there are other causes: http://support.microsoft.com/kb/330159But this seems to fit you: http://www.mydigitallife.info/2007/04/16/p...k-library-file/Louis

Read other 5 answers
RELEVANCY SCORE 76.4

Errror reads as follows
The procedure entry point GetPrinterA could not be located in the Dynamin Link Library spoolss.dll

I have tried the steps in Arctical-266416
WINSPOOL.DRV in %systemroot%\system32 version is 5.0.2195.6659
I have als so deleted [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environmentals\Windows NT x86\Drivers\Version-3]

I did a Windows Update to SP4 without archiving the files. As soon as I rebooted I received the error

I am using Windows 2000 Professional
Thanks in advance

Jesse
 

A:Spoolsv.exe - Entry Point not found

[tsg=welcome][/tsg]

Hi There!

It looks like you're running WinNT 4.0.
Try installing SP-6a and see if that fixes the problem. If not, then remove and Reinstall your printer using the most updated drivers you can get.
Good Luck!

ST
 

Read other 3 answers
RELEVANCY SCORE 76.4

have an hp 933 p 3. will not boot. goes to xp splash screen then goes to last known good configuration. will not boot in any of the choices. just goes back to last known good configuration. tried to do a non console repair. was going fine until "unregmp2.exe entry point not found" popped up and that's as far as it goes. HELLLLLPPPPP
 

A:unregmp2.exe entry point not found

You should read through this thread.

http://www.mcse.ms/message297206-3.html

Let's us know what works
 

Read other 1 answers
RELEVANCY SCORE 76.4

when i start any program
it says
Error entry point not found
but when i click ok then the program
starts
heres the picture please help

sorry about the small picture
it was 3mb soo i had to make it smaller

A:ERROR Entry point not found

Try this.

Go Start > Run > Type in sfc /scannow. It may ask for your XP CD - just insert it and let it go.

Let me know the results.

Good luck,

-Coolfreak

Read other 3 answers
RELEVANCY SCORE 76.4

My HP is popping up with this message upon startup and the text appears as: The procedure entry point PowerReadACValue could not be located in the dynamic link library POWRPROF.dll I am totally unaware how to fix this. I am running Windows Vista Home
Premium 64 bit on a dv7-1245dx. I hope someone has an idea of fixing this. Thank you all inadvance.

A:TVAgent.exe-Entry Point not found

tvagent.exe is a part of HP MediaSmart TV by CyberLinkDo you use the program?If so, try to reinstall it.

Read other 1 answers