Over 1 million tech questions and answers.

Win7 Installer fails with BSOD & error code: STOP: ...

Q: Win7 Installer fails with BSOD & error code: STOP: ...

Hi everyone,
I just bought an Electronic download verison of Windows 7 Professional from http://www.itsnotcheating.com.au to upgrade my system from Windows XP Pro SP3. The setup starts and gets past creating a user account, setting a computer name etc and then restarts and looks like Windows 7 is going to startup and then I get a BLUE SCREEN OF DEATH with:

STOP: C000021a [Fatal System Error}

The intial session process or system process terminated unexpectedly with a status of 0x00000000 (0xC0000001 0x00100400)

It then mentions about dumping the memory out to disk and reboots. If i press F8 and attempt to boot SAFE MODE I get a requester saying that setup cannot be completed in Safe Mode. If try the startup recovery the first time it says it fixed a problem and wants to restart again but it has fixed nothing. Next time the startup recovery just runs and doesn't appear to finish. I have run the Windows Memeory Diagnostic within the setup and memory checks out fine. I initially thought the onboad audio chipset was the issue and disabled that but it made no difference. I did get one successful installation but it eventually crashed and burned with the same error after approximately 12 hours.

I have posted another article regarding this on Microsoft Answers and was advised that I have corrupt install files by the MVP Moderator.
I have re-downloaded the installer again and tried again with the same result. I have been trying to work this out for the last 5 days. I have also tested my install files on another box and they work faultlessly so there is nothing wrong with those.

I have found one common element another forum user on Microsoft Answers has listed a VERY similar problem (see link to forum article): http://social.technet.microsoft.com/Forums/en-IE/w7itproinstall/thread/7a4d570e-b0af-4a58-956f-66e14cdb4e4a

The common element is that we are both running the following motherboard:
DFi LANPARTY 925x-T2

Has anyone else tried this mainboard with Windows 7? The board is flashed to the lastest BIOS version offered on DFI's website. The board has worked faultlessly under Windows XP. I have included my system spec's below.

DFi LANPARTY 925x-T2 Motherboard
Intel Pentium 4 3.2Ghz Processor
4 Gig RAM (comprising of 4 x 1 Gig sticks of DDR2)
3 x 120 Gig Western Digital Hard Drives connected via SATA
1 x LG Dual Layer DVD Burner connected via SATA
NVidia Geforce 9400GT (1 Gig Model) PCI-Express
Creative Labs Sound Blaster Audigy 2 ZS (have tried without this in the machine same problem)
Windows XP SP3 Operating System with all the latest updates

Please Help

Thanks,
Dwarfboysim

RELEVANCY SCORE 200
Preferred Solution: Win7 Installer fails with BSOD & error code: STOP: ...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Win7 Installer fails with BSOD & error code: STOP: ...

Out of curiosity, what do you have your ram voltage (vdimm) set at in your mobo bios?

And do you know the exact brand and model number of your memory?

That error could be in relation to DVD drive. Try creating a USB install key and install from that while the DVD drive is not connected. If it installs, play with it for a day or so to test.
USB Windows 7 Installation Key Drive - Create

Also if you want highest chance of install success, you might want to also remove 3 of those ram sticks and go with only 1GB. You can replace them after you're satisfied the install went right and stable.

Read other 9 answers
RELEVANCY SCORE 81.2

This started happening over a week ago. I did try a repair using the Windows 7 Ultimate-64 bit DVD but the problem remains. When the option to search for updates is pressed a message comes up "Windows could not search for new updates" Error Code 800F080D.
Any help will be most appreciated.

A:Windows 7 update installer fails with error Code 800F080D

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 1 answers
RELEVANCY SCORE 76.4

Hi,

Windows update for IE10 on win7 64 fails continuously with errore code 9c59. Manual install resulted the same.
I run sfc /scannow which didn't find any problem.

I am attaching my CBS log.

Can anyone help?

Thanks,

Beez

A:Windows update for IE10 on win7 64 fails with error code 9c59

Please follow the Windows Update Posting Instructions and post the requested data

Read other 9 answers
RELEVANCY SCORE 76.4

Hi folks

I found my way here after being unable to update to IE10 on Windows 7 (32)

the windows update error is:

"Internet Explorer 10 for Windows 7
Installation date: ‎09/‎05/‎2013 10:22 AM
Installation status: Failed
Error details: Code 9C59
Update type: Optional"

I have attached the CBS.zip file. (NB: when I pasted the copy of CBS folder to my desktop I got an error message that access to CBS.log was denied. Maybe this is normal?)

I'd be most grateful for any help you can give.



Regards

Chris

A:Windows update fails for IE10 on Win7 error code 9C59

the copy/paste problem is common - which is one reason why I tend to prefer just collecting the CBS.log file on its own.
Copy the C:\Windows\logs\CBS\CBS.log file to your desktop, and compress it, then upload that.

Read other 9 answers
RELEVANCY SCORE 75.6

I am having a BSOD problem. I am seeing STOP code 0x0000005A which is a critical_service_failed code. 
I can't system restore, recovery image or start up repair. I am slightly freaking out because of course I don't want to lose all my files. 
I did windows memory diagnostic and that turned out fine. Right now I have just downloaded Seatools Hard drive test that I saw posted on pcsupport and I am going to attempt to run it from cmd prompted if possible and just make sure my hard drive is still intact.
Now I can remember what I did yesterday and any changes I made if necessary. 
Yesterday I tried to resolve a problem that I had been having for a few weeks where my computer wouldnt restart or shutdown properly, it would hang up on the logging off screen, shut down screen or wait while we configure windows screen. I did a clean boot and only loaded up windows key services. I downloaded rkill and emsisoft free emergency kit and ran rkill then the emsisoft. Emsisoft found 6 files that were affected, one of them a registry file. I am not sure if this is the problem but I quarantined those 6 files including the registry file and then I set back some of the Toshiba services and other services that were turned off and then I restarted my computer. When I did that, I got a blue screen of death and my computer wont boot up at all.
Could I get some help please?
 

Read other answers
RELEVANCY SCORE 75.6

Windows update for IE10 on Windows 7 64bit fails continuously with error code 9c59. I tried the stand alone updater with the same results. All other windows updates complete successfully, it's just IE10 that continually fails.

Don't know if this is related but I do have problems with IE8 (current browser). After a while, an open IE window will become non responsive and can't be closed out. I have to use task manager to close it down. I have sent off the reports to MS, but no solution has appeared.

I've attached the cbs file. Let me know what else I can do. Thanks.

A:Windows update for IE10 on win7 64bit fails with error code 9c59

There are no significant file errors in either SFC or CheckSUR logs.

In these cases, it has sometimes been a solution to uninstall IE9, reboot a couple of times, and then reinstall IE9 again, before installing IE10 successfully.
It's worth a try

Read other 5 answers
RELEVANCY SCORE 71.6

A favorite for diagnosing the Blue Screen error codes.






This reference section contains descriptions of a number of different bug checks.
Each reference page lists the bug check code, the text string, and the four additional parameters which are displayed with each bug check. It also describes how you can diagnose the fault that led to the bug check, and possible ways to deal with the error.
For a full list of bug check codes, see the bugcodes.h file. This file can be found in the inc directory of the Microsoft Windows Driver Kit (WDK)



Bug Check Codes

A quick way of running multiple versions of Internet Explorer like IE6 with IE7 installed on Windows XP
Install multiple versions of IE on your PC | TredoSoft

Read other answers
RELEVANCY SCORE 69.2

I'm new to posting on these boards but I'm going to do my best to follow all the guidelines. I ask your forgiveness in advance, just in case. I wasn't able to use the system specs tool because it says .NET won't install. I found that interesting since I believe .NET to be the root of my problems. I've been trying to run Windows Update for far longer that I like to recount. This computer had been on a shelf and my bosses want to bring it out for a new employee. It seems to work fine, except for it absolutely will not update and sometimes when I run Windows Update I get BSOD with Invalid Kernel and stop error 0x0093. I have tried everything I've found in the Seven Forums that applies to my version of Windows and errors. I have tried countless FixIts, but nothing has worked. I finally gave in and registered with y'all and I hope someone can help.

Thanks for your time.

A:Windows update repeatedly fails; occasional BSOD Stop error 0x0093

Please follow the Windows Update Posting Instructions and post the requested data

Read other 9 answers
RELEVANCY SCORE 68.8

I've been plagued with error code 124s for over eight months (which is about as long as I've had the system) now on my laptop. There's nothing specific that seems to trigger the crash - I can be doing anything on the system, even just letting the system idle while I'm in the bathroom. After a couple of seconds of freezing, and the sounds, if I have any on, also going on a short repetitive loop, the system crashes with the BSOD.

When I had Windows Vista, the crashes were a LOT more frequent, sometimes a couple of times a day, at least once every couple of days. After installing Win7 (as soon as it came out, practically, as I was hoping maybe the issue was with my installation of Vista), they went down to once every two weeks or thereabouts, and with the system a lot more reliable, I didn't think much of it and kept using it.

Now I've gotten two crashes yesterday, and two today, hours apart. One today was just a little after I booted the machine, and the crashes are starting to worry me again.

I've ran Memtest for about 10 hours with no errors whatsoever, if it helps. I've tried some other stuff like updating drivers, fresh reinstall of OS, etc - since I've had this problem for so long, I've tried most of the things I can, and I'm practically at my wits' end. I don't have any other problems with the computer.

I've attached the related files. I can also attach crash minidumps if it's needed. Thanks a lot.

A:BSOD - Win7, error code 124

Did you upgrade from Vista to Windows 7?

Run the Windows 7 Upgrade advisor --> http://www.microsoft.com/Windows/win...e-advisor.aspx

Regards. . .

jcgriff2

.

Read other 19 answers
RELEVANCY SCORE 68.8

Greetings benevolent community.
I have a Sony Vaio T series Laptop (Model SVT131A11W) made in China bought in India. Great machine while it lasted. Yesterday had trouble connecting to Skype. Decided to restart. The following appeared on the dreaded Blue Screen...

Technical information:
STOP: 0X0000007E (0XFFFFFFFFC0000005, 0XFFFFFF8800164CEAA, 0XFFFFF8800311D9B8, 0XFFFFF88000311D210)
iastor.sys - Address FFFFF88001645EAA BASE AT FFFFF8800161000, Datesttamp 4ed5a567
By the way these hexadecimal numbers vary every time I try a different option but the 0X0000007E code remains the same.

I have tried all the F8 options: Safe Mode, Safe Mode with Networking, etc right down to Start windows normally, but it keeps reverting back to the blue screen. The "Launch Startup Repair (recommended)" option loads the files but goes back to the blue screen. I cannot access anything on this machine.

Grateful for any dummy's guide help please

A:BSOD Stop error code 0x0000007E

That situation is critical. The storage controller is failing here, which may actually occur from the disc too.

Try the bootable disc check.
SeaTools for DOS and Windows - How to Use
Dont forget to set the storage controller to IDE, as you have AHCI/SCSI (I cannot be sure without seeing the data) enabled.

Does it find any error?

If not, the best and the easiest way is to boot into the BIOS (advanced setup), disable Intel Rapid Storage, Intel Smart Responce or anything of this line, if present, and then perform a clean reinstall.

Read other 2 answers
RELEVANCY SCORE 68

Hello,
PC is rebooting randomly while working and giving me a BSOD maybe twice a week. It is the Stop Error Code: 0X50 - HDAUDBUS.SYS. I have tried updating my sound driver to no success. Nothing was recently installed, no other symptoms, and audio is working
fine. Looking for suggestions on how to stop the reoccurring BSOD.

Read other answers
RELEVANCY SCORE 68

Hello, peoples. I seem to have attained a BSoD yesterday.

The STOP Error code was "0x0000010D (0x00000005, 0x00000000, 0x00001202, 0x84E36560)".

I believe that one of the problems is MotioninJoy's DS3 Tool program and it's driver, as every time I attempt to use it, it BSOD's. I also believe that another problem is my PSU's fan, as it does not seem to be working anymore (I plan to buy a new PSU in April... Hopefully it'll last long enough til then...).

I have attached the zip file containing the system information, as per requested.

Any help will be appreciated.

Thanks in advance.

A:BSoD Stop Error Code 0x0000010D (Iunno what the cause is...)

Hi Zero Aurion.

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

Also, the BIOS is very old, off 2006. The latest available one is old too, of 2009. If possible, tryto update the BIOS to the latest. BIOS Update [NT94510J.86A]
________________________________________________________________________________... Read more

Read other 7 answers
RELEVANCY SCORE 68

I've been getting the BSOD sporadically for quite some time now and I am finally fed up.

Here is the STOP error information:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 4e
BCP1: 0000000000000007
BCP2: 000000000021DD10
BCP3: 0000000000000001
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\011112-30654-01.dmp
C:\Users\Dustin\AppData\Local\Temp\WER-54600-0.sysdata.xml


I've attached the dump file referenced above.

Here are some details on my machine:
Gateway DX4300
AMD Phenom(tm) II X4 810 Processor 2.60 GHz
8GB RAM
Windows 7 - 64-bit, full-retail
Hardware purchased in 2010, Windows 7 upgrade occurred early 2011


Not sure what the cause is, any help is greatly appreciated.

Also, there are a ton of files in my minidump in addition to the one attached, is this normal?

thanks in advance,
Dustin

A:BSOD STOP Error Code: 0x0000004e, unknown cause

  
Quote: Originally Posted by dlwoodward


I've been getting the BSOD sporadically for quite some time now and I am finally fed up.

Here is the STOP error information:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 4e
BCP1: 0000000000000007
BCP2: 000000000021DD10
BCP3: 0000000000000001
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\011112-30654-01.dmp
C:\Users\Dustin\AppData\Local\Temp\WER-54600-0.sysdata.xml
I've attached the dump file referenced above.

Here are some details on my machine:
Gateway DX4300
AMD Phenom(tm) II X4 810 Processor 2.60 GHz
8GB RAM
Windows 7 - 64-bit, full-retail
Hardware purchased in 2010, Windows 7 upgrade occurred early 2011
Not sure what the cause is, any help is greatly appreciated.

Also, there are a ton of files in my minidump in addition to the one attached, is this normal?

thanks in advance,
Dustin


Related to mcdbus.sys MagicISO SCSI Host Controller from MagicISO, Inc. I would remove it.

I would also remove Related to a product from Sonic Solutions

Read other 3 answers
RELEVANCY SCORE 68

Dell Pc, at first the unit would not boot at all, ran recovery console and chkdsk /r and now the windows xp splash screen comes on and then this blue screen code "Bsod code stop: c000021a (fatal error)".

A:Bsod code stop: c000021a (fatal error)

Hello SteveD4

Welcome to bleeping computer we kind of need a better description of your problem you are having. Upon the error code search i have provide some troubleshooting steps:

Try these steps

Last known good configuration
If the previous steps in this article do not resolve the problem, start the computer by using the last known good configuration. To start the computer by using the last known good configuration, follow these steps:Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

1. Click Start, and then click Shut Down.
2. Click Restart, and then click OK.
3. Press F8 at the indicated time:
* For an x86-based computer: When a screen of text appears and then disappears , press F8. (The screen of text may include a memory test, lines about the BIOS, and other lines.) There may also be a prompt that tells you when to press F8.
* For an Itanium architecture-based computer: After you make your selection from the boot menu, press F8. There may be a prompt that tells you when to press F8.
4. Use the arrow keys to select Last Known Good Configuration, and then press ENTER.

NUM LOCK must be off before the arrow keys on the numeric keypad will function.
5. Use the arrow keys to highlight an operating system, and then press ENTER.

Notes

* Choosing the Last Known Good Configuration startup op... Read more

Read other 2 answers
RELEVANCY SCORE 67.2

My computer is not working properly. I have to use it in safe mode. When I look in the device driver section it has an exclamation mark next to the "Consumer IR Devices". It says: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Anyone know how to fix this? When I click on "check for solutions" it doesn't do anything.

i already tried to reformat my G60VX but still this msg appear.

is this because i do RAID??

this is my minidump file please help

i use ASUS G60VX-RBBX05 notebook with win7 home premium 64bit

A:win7 BSOD *ERROR MSG* Consumer in devices (code 31)

Assuming that you can get into Safe Mode (from what you said), try uninstalling that device, restarting back into Normal mode, and see what changes may have been made.

If everything seems to work fine, then Taadaa.

If not, feel free to reply.

Read other 5 answers
RELEVANCY SCORE 67.2

Hello there!

For some times my computer has been shutting down after being on for more than 24h by the screens just going dark or something similar, this is probably due to a memory leak but I'm not sure. Now yesterday I got a BSOD instead which read something like "nvlddmkm.sys error".

I've been spending my whole day trying to fix this in safe mode (which works without any kinks). The first thing I tried was rolling back drivers, then updating to the latest and lots of driver related things, I still haven't fixed it but I decided to see if I could turn my computer on in normal mode with my GC disabled via device manager, now instead of crashing at the Windows screen, I now crash after the Welcome screen and I get a BSOD that reads IRQL_NOT_LESS_OR_EQUAL with 0x0000000A as the stop error code.

Now what I wonder is if there's any chance to save my GC or is it completely toast? And if I decided to get a new one, will that even fix it? Since I still get BSODs without my GC turned on in the device manager.

Read other answers
RELEVANCY SCORE 67.2

Hi there. This is my first time posting on this forum so I hope some one can help me. I have posted on Tom's hardware about the problem but haven't received many replies.
About a month ago I came home and my computer had a bsod and that one was Stop 0x00000124. I really didn't think much of it like I should have and let it go since I couldn't reproduce it. Well just this last few days my computer bsod on startup nonstop with Stop 0x00000101 and it also says something about a secondary processor not receiving a timed interval. I can start it in safemode without any problems what soever. My build is home built and as follows.

Mobo: Gigabyte F2A55M-DS2
CPU: AMD A10-5600k AMU
GPU: Nvidia GTX 470
RAM: 2 Corsair 2gb sticks
PSU: Corsair CX750M

Everything is relatively new. Maybe 2 months old tops except the graphics card which is about 3 or 4 years old. Things I have already done to troubleshoot this are.

1. Open the case, take out all the components, clean them, reseat. Still bsods.
2. Ran Memtest86 and no bsods or failures. I also have two other ram sticks which I have used and it still bsods so I am almost 100% sure it isn't the RAM.
3. Ran cpu test called prime95 as suggested by someone on Tom's hardware and no bsods (in safe mode).
4. I have reinstalled almost every driver except the chipset because it will not allow me to install those in safe mode but I can't even get my computer to boot at all anymore aside from safemode without bsodding.
5. I checked speed fan and there ... Read more

A:BSOD buildup until constant error code Stop 0x00000101

Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it has completely finished and then upload the new logs.

Read other 9 answers
RELEVANCY SCORE 66.8

Hey everyone!

For the past few weeks that I've been playing Star Wars: The Old Republic, I've been getting BSOD's every time I play. I've noticed that it only happens when I'm playing SWToR. I tried to fix the error by reformatting my computer, which didn't help. I've run memtests, switching the RAM cards around, etc., again to no avail. Any information you guys could give me would be great, I'm really getting to my wits end here.

Thank you!

A:BSOD while playing Star Wars ToR, stop error code 0x0000001E

There seems to be a problem with your Windows activation. Please post this report: Activation Issue Posting Instructions

Read other 7 answers
RELEVANCY SCORE 64.4

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.
Thanks,
Miket797

A:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

Read other 2 answers
RELEVANCY SCORE 64

Enountered a BSOD that said something along the lines of "Unknown Hard Error" with the code in the title followed by the path: \systemroot\system32\ntdll.dll
It then said something about dumping physical memory to disk. I encountered this BSOD after I purposely powered down my machine and it had been turned off for a couple of hours.

All help is greatly appreciated.

p.s. I encountered an unhandled exception error when trying to run the SF diagnostic tool so I hope it completed sufficiently.

Thanks!

A:BSOD with error code "Stop: C0000221 Unknown Hard Error"

Your latest dump says ....

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa80072be3d8, 0, 0}

Probably caused by : hardware

Followup: MachineOwner
---------
Follow the steps stated in Stop 0x124 - what it means and what to try.

Read other 5 answers
RELEVANCY SCORE 63.6

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

Read other 3 answers
RELEVANCY SCORE 61.2

Computer is running Win7 Pro SP1, 64 bit.
 
MS .NET updates have been failing since June 2015 with error Code 656.
 
1) Tried .NET repair, updates fail.
2) Tried installing updates after clean boot. Updates fail.
3) Uninstalled .NET 4.5.2 using MS utility (through Control Panel, Uninstall)
4) attempted to reinstall 4.5.2 using downloaded offline installer, got error "The Windows Installer Service could not be accessed".
5) ran a registry edit to fix Windows Installer as found on MS website, still cannot install.
6) ran .NET cleanup tool from MSDN
7) reregistered msiexec for 64 bit, 4 commands.
8) tried reinstall using web installer
 (all work done under administrative network login).
Also tried reinstall when logged in as local system administrator, same error.
 
I still get "Windows Installer Service cannot be accessed" error when trying to reinstall .NET Framework 4.5.2.
 
I do have the option to revert to restore point and get back to where this computer was before all this started.
 
Advice?
 
Thanks!
Lynn

A:.NET 4.5.2 install fails - Windows Installer Service error

I had to use System Restore to revert as person returned from vacation and needed to use .NET.
 
I see that many have viewed this post but no one has replied. Any suggestions welcome, and Thanks!

Read other 1 answers
RELEVANCY SCORE 61.2

Hello I'm Having Problem Updating My Windows 7 Ultimate into Windows 7 Ultimate SP1


I Tried Using System Update Readiness Tool for Windows 7 (KB947821) [August 2011] But an Error Pops Up


Please HELPP!!

A:Win7 Ultimate Update Failed to Win7 Sp1 Error Code 80073701

It is mostly caused due to corrupt language packs. Can you uninstall all language packs, reboot the PC, and then try to install the service pack again?

Read other 2 answers
RELEVANCY SCORE 60.4

 I HAVE A HP NOTEBOOK RUNNING WINDOWS 7, ALL UPDATES ARE INSTALLED (I BELIEVE) AND THIS ERROR ONLY POPS UP OCCASIONALLY. BUT I WORRY ABOUT SECURITY ISSUES! I  HAVE RUN SFC /SCANNOW, CHKDSK /F/R, MS SECURITY ESSENTIALS
COMPLETE SCAN, MALWARE BYTES,MS MALICIOUS PROGRAM REMOVAL AND OTHER SECURITY PROGRAMS. ANY ISSUES FOUND WERE CORRECTED BUT I STILL HAVE THIS PROBLEM!
 ON A RELATED NOTE, WHEN TRYING TO RUN  "MS FIX IT" DURING THE GATHERING INFO ABOUT MY COMPUTER PORTION, I RECEIVE THE "UNABLE TO DOWNLOAD TROUBLESHOOTER, PLEASE CHECK YOUR INTERNET CONNECTION". THE RESULTS OF SEARCHING
FOR AN ANSWER TO THIS PROBLEM MIRROR THE RESULTS OF MY ERROR CODE SEARCH! PRETTY USELESS! I HAVE LOOKED EXTENSIVELY ONLINE FOR A RESOLUTION FOR THIS PROBLEM. MOST POSTS ARE FROM 4 OR MORE YEARS AGO AN ARE USELESS AND IRRELEVANT. LINKS IN
THESE POSTS SEND ME TO  BACK TO MS COMMUNITY SITES OR TO A MS SEARCH SITE WHICH SENDS ME BACK TO THE SITES I HAVE ALREADY BEEN TO.

 ANY HELP WOULD GREATLY BE APPRECIATED.
THANKS,
DAVE

Read other answers
RELEVANCY SCORE 60

Originally my friend sent this to me because he was not able to connect to the internet. He lives out of state, so I was not able to see the problem at his location. I am currently not having any connection issues, however, Zone Alarm Update errors and Norton Security Scan installer errors and does not install. I ran multiple scans with Malwarebytes, Superantispyware, Emsisoft, and Hitman Pro. All of these produced similar results. I removed the hard drive and attached it to another computer running Avast and another running ZA, nothing to note from either scan. I have uninstalled and reinstalled ZA and still cannot get it to update and Norton Security scan will not install. I am thinking that there is something I cannot find. Thanks in advance for your help.
 
Scan result of Farbar Recovery Scan Tool (FRST.txt) (x64) Version: 12-04-2015
Ran by Petty (administrator) on PETTY-ACER on 12-04-2015 18:50:34
Running from C:\Users\Petty\Downloads
Loaded Profiles: Petty (Available profiles: Petty)
Platform: Windows 7 Home Premium Service Pack 1 (X64) OS Language: English (United States)
Internet Explorer Version 11 (Default browser: Chrome)
Boot Mode: Normal
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
 
==================== Processes (Whitelisted) =================
 
(If an entry is included in the fixlist, the process will be closed. The file will not be moved.)
 
(AMD) C:... Read more

A:Zone Alarm Fails to update and Norton Installer Encounters an Error

First, uninstall the multiple Security products listed below:
 
ZoneAlarm - follow the instructions here - ZoneAlarm Removal Tool
Norton Security Scan - again instructions are here - See here for some help
HitmanPro - You may have to install HitmanPro again and then remove it with Revo Uninstaller
 
Second >>>>
After the uninstalls and reboots, run the following Fixlist script ----
Begin by moving the FRST64.exe file to the desktop (we will remove this and others when we are finished).
 

Open notepad. Please copy the contents of the quote box below. To do this highlight the contents of the box and right click on it and select copy. Paste this into the open notepad. Save it to your desktop as fixlist.txt
 

Start
CreateRestorePoint:
CloseProcesses:
HKU\S-1-5-21-2122515879-1497535132-2502957043-1000\...\MountPoints2: {2e497db7-f037-11e1-a93c-dc0ea1230d8e} - E:\WIN\setup.exe
HKU\S-1-5-21-2122515879-1497535132-2502957043-1000\...\MountPoints2: {68f35def-5c7a-11e3-863f-dc0ea1230d8e} - E:\Windows\PTMHS291LVW_V4_14_1_0.exe
HKU\S-1-5-21-2122515879-1497535132-2502957043-1000\...\MountPoints2: {8b09404b-0285-11e3-bdcb-dc0ea1230d8e} - E:\win\setup.exe -phs
ProxyEnable: [.DEFAULT] => Internet Explorer proxy is enabled.
ProxyServer: [.DEFAULT] => http=127.0.0.1:55960;https=127.0.0.1:55960
SearchScopes: HKLM-x32 -> DefaultScope {4AB8A1B5-D909-45A6-8E29-36071A724244} URL =
SearchScopes: HKU\S-1-5-21-2122515879-1497535132-2502957043-1000 -> Defaul... Read more

Read other 15 answers
RELEVANCY SCORE 59.6

During Windows backup, which wants to backup the 'C' drive and my games drive 'E' (for some reason), I get the following error message after the 'C' backup has completed but not the 'E':

'The backup operation that started at '‎2015‎-‎12‎-‎20T06:00:25.459859400Z' has failed with following error code '0x8078012D' (The operation failed due to a device error encountered with either the source or the destination. If the source or destination volume is on a disk, run CHKDSK /R on the source or destination volume, and then retry the operation.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.'

I ran CHKDSK \R and received several errors of the type: 'A disk read error occurred 0000185. The disk does not have enough space to replace bad clusters detected in file xxxxxx of name xxxxxx.'

My 'E' drive is 2TB with 205GB free. I really don't believe that the cluster(s) in error are bigger than 205G, but what do I know?

Anyone have experience with this problem?

Thanks.

Read other answers
RELEVANCY SCORE 59.2

I am having a frustrating problem with Windows Vista installer. It's error code 641. I have two pc's in my house with Vista, so I've got twice the problems. I can run some updates, but others I can't, including one for Silverlight. Also, I can't update iTunes, it bombs out. Please, if anyone knows how to fix this, let us all know. BTW, I purchased a reg fix program for $29.00 that led me to believe it would fix error code 641, but it didn't. Boy, I got better things to do on a Saturday morning than mess around with this. I'm not very technical, so I get a little nervous messing with registry, etc. SOS! HELP!

A:Windows Installer error code 641

Hi,

Try these fixes: -

Windows Installer and Error Codes 641 & 80070641 Issues - Microsoft Answers

Read other 2 answers
RELEVANCY SCORE 59.2

Have searched as much as I know how, even bought programs that garunteed the error code could be fixed to no avail. How do I get the Windows Installsheild updated OR how do I get the problem with error code 1720 fixed so that I can load my program? ---Thanks
 

A:Win 7 Installer error code 1720

You should already have the latest version of the Installer.

You need to tell us more about when this fault occurs -- is it with all installs, or only just one. The message is of the type that usually points to an issue with a particular install package. Perhaps it is the wrong version

You may also wish to enable installer logging.

http://support.microsoft.com/kb/223300

After enabling logging, locate the installer log created after an install failure by running %temp%. Search for and open the most recent "msi" log. (see screenshot). Upload that here as an attached file.
 

Read other 1 answers
RELEVANCY SCORE 58.8

I've had this problem for as long as I can remember, not sure why it's happening, but I've been unable to install certain programs(mostly games) because of a windows installer error message. I've gone to lengths to try and repair it using the Microsoft Fix-it, and other methods, but all of them don't work.

I saw a previous thread with the same problem, but it was more easily solved. I believe mine is much more complex, as I've tried that solution, and it doesn't work.

Open cmd, SFC /SCANNOW. I've included the logs, and as you can see, lots of corrupted files =[

A:[Win7] Windows Installer Error

Hey Bojango,

Do you keep your updates regular and antivirus running?

There can be many reasons why your files are corrupted missing including but not limited to; malicious software, Bad install, accidental alteration or deletion and much more..

Has this always been an Issue if so its very possible you installed the OS in a corrupted state. ether way Windows being a very restricted operating system in terms of alterations possible your best bet is to do a fresh install.

I will be happy to help you with any questions you may have in relation to backing up pre-existing files and installing a new Operating system.

Best Wishes

Read other 2 answers
RELEVANCY SCORE 58.8

I am plague with Vista Business update to SP2 with the error Code 80070002
I have performed all the "Get help with this error" suggestions. The System Update Readiness Tool has run and completed with no problem and I have tried installing SP2 from the stand alone download

A:SP2 fails error Code 80070002

1.Try reset the whole WU in aggresssive mode How do I reset Windows Update components?
2.Try install SP2 standalone version in safe mode

Read other 7 answers
RELEVANCY SCORE 58.8

Hello, firstly I would like to say thank you in advance for any help that can be given. Also I would like to state that I am new to dealing with technical computer problems and may often not understand some of the jargon presented. All my current information on this matter has come through google research.

The main issue I first noticed was that mysteriously, about a quarter of the programmes on my laptop has mysteriously uninstalled themselves. A few examples were the pre-loaded acer programmes, some itunes products, a couple of games, and scarily AVG Antivirus, along with quite a few others.
A few of these programmes reinstalled fine, such as AVG, but when it came to attempting to reinstall itunes I came across with this error message:
Error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personal or package vendor.

As recommended on the itunes support forums i attempted to remove all programmes affiliated with itunes before trying to reinstall, but i received this same error code while trying to uninstall one of the programmes. So this was not solved.
I then researched more and performed an SFC scan (not entirely sure what this is), and got the report of "Windows Resources Protection found corrupt files but was unable to fix some of them". I followed the command to the CBS log, but got stuck there due to lack of understanding.

I run WIndows Vista 32bit... Read more

A:Windows Installer Error Code 1721

Welcome
Never heard of this one before
First Run a full updated anti virus scan
Download and run Malwarebytes full scan and update first
If postitve come back for help
If neagative
Run the SFC again, three times.
If that does not work, try a system restore from 3 days before the problem.
System Restore - How to
If none of that works, we may ask for the CBS Log.

Things like this do not just happen. I know that it is a virus or something that you did. Think back, add any software, try to experiement with the computer etc?

Read other 9 answers
RELEVANCY SCORE 58.8

OS is 32bit VHP. Can't install TurboTax2009 updates - I get an error code 2203 windows installer problem. tried the manual method they suggested and got the same results. Also automatic Java update fails to install. I tried uninstalling and reinstalling TurboTax from control panel to see if that would solve the problem, but uninstaller wont work. I have Neosmart vista repair disk - should I just run that? I'm reluctant to to that if I don't have to. Would running that impact my files and documents?

Here's a hijack log if that's helpful. Much appreciate any advice. Thank you!
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:30:32 PM, on 2/7/2010
Platform: Windows Vista SP2 (WinNT 6.00.1906)
MSIE: Internet Explorer v8.00 (8.00.6001.18882)
Boot mode: Normal

Running processes:
C:\Windows\System32\smss.exe
C:\Windows\system32\csrss.exe
C:\Windows\system32\wininit.exe
C:\Windows\system32\csrss.exe
C:\Windows\system32\services.exe
C:\Windows\system32\lsass.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\nvvsvc.exe
C:\Windows\system32\svchost.exe
C:\Program Files\Microsoft Windows OneCare Live\Antivirus\MsMpEng.exe
C:\Windows\System32\svchost.exe
C:\Windows\System32\svchost.exe
C:\Windows\system32\winlogon.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe
C:\Windows\system32\svchost.exe
C:\Windows\System32\spoolsv.exe
C:\Windows\syst... Read more

A:windows installer error code 2203

Read other 9 answers
RELEVANCY SCORE 58.4

I took on a basket case for a friend. Machine hadnt booted for months. I got it running in normal mode after it churned for 2 hours and found outdated Norton Internet security and AVG running. Unable to uninstall them using uninstall, so got in registry and deleted all mentions of AVG, Norton and Symantec. Managed to download and install Windows updates and SP 3 for XP as well as IE 8. Tried to install Microsoft security essentials but it won't install. Ran Malware bytes which found about 15 threats which I let it delete. I then installed while online Avast! and it seems to run.Tried to install Word viewer, got error message, then ran Malwarebytes again, one more threat found. Now only boots in safe mode with networking, so tried installingword viewer again, same error (install failed). IE now won't start.
 
I think I must have accidentally deleted something I need while going through registry deleting Norton stuff. I tried System File Checker but it wanted original install CD to proceed and I don't have it.
 
I have tried running Combofix in safe mode without letting it fix anything just for info, but Combofix won't get past the opening autoscan screen. I tried letting it run for two hours, but no scanning takes place.
 
Any hope other than complete system restore and loss of owner's data?

A:Boots only in safe mode, windows installer fails, IE fails

Sounds to me as if a clean install is a good idea...after moving valued data files to safety.
 
I would move files simply by connecting the drive as a slave to a different system...and moving the files considered valuable.
 
When friends bring me their infected systems, that's usually the quickest/surest method that I use to ensure that they have a working system that is free of malware.
 
Louis

Read other 3 answers
RELEVANCY SCORE 58.4

I'm attempting to install windows to a 40GB SSD and I continuously receive the error 0x80070570. My first thought when I got the error was that it could have been an issue with the file itself. So I redownloaded it and still got the same error and from there I've tried nearly everything listed in other threads relating to this issue. Here's a synopsis of everything I've done thus far.

Start:
Removed old hardware, replaced with new mobo, cpu and gfx card
Downloaded Windows 7 Home Premium from microsoftstore.com
Using the Microsoft supplied tool I created a bootable USB flash drive with the ISO
Powered the new hardware on for the first time resulting in a clean boot with zero errors
Booted to Win7 install, ended up with Error 0x80070570
Redownloaded the ISO, Remounted it on the flash drive
Attempted install, still errored
Repeatedly attempted the install sometimes resulting in a freeze of the installer but usually the same error message
Tried installing on my other SSD
Cleaned and reseated RAM and Slots
Did a secure wipe of both SSDs and retried install on both
Attempted install with the ISO burned on a DVD using low speed...same error
Tried reburning multiple times with the same error each time
Ran 5 passes of memtest on both ram sticks in all possible configurations. 0 errors

After all of these steps I still cannot complete an installation. The install errors out at different points of the "expanding" step each time.

Finally in a spate of desperation I tried usin... Read more

A:Corrupt Win7 installer? Error 0x80070570

There should be a MD5 checksum (or similar) on the MS site that you can use to check the download to make sure it's okay.

Do you have an old SATA or ISE drive you try in this computer, see if that works?
Also, check your BIOS Setup, make sure it's not setup for RAID, make it AHCI if possible.

Read other 4 answers
RELEVANCY SCORE 58

I used to run windows 8.1 x64 but I had to reformat because I thought that would've fixed my problems installing windows 10. When I tried to install windows 8.1 x64 again it failed and got the 0x80070570 error. I also tried windows 7 64bit and windows 10 64 bit but I got the same errors. 32-bit OS installs fine though. Of course all my attemptse were clean installs.

Read other answers
RELEVANCY SCORE 58

Trying to upgrade an existing 1.6 ATA install to 1.7.  Get Error code: 0x80070643.
I have tried both from Windows Update and a standalone installer.  Same error both ways.  Not seeing anything in the logs other than the same error code.
Any ideas?
 

Read other answers
RELEVANCY SCORE 58

After failing twice, I read and followed the directions MS posts for this error code: (1) download and extract subinacl.exe and (2) create/run as admin the reset.cmd batch file, as instructed. Reset.cmd ran as expected. Additional attempt to install update failed with the same error. I have hidden the update for now.

Note: The parameters of this error do not fit. I am Admin and logging in as such. Also logged in using super administrator account. Firewall is not obstructing. Updates are set correctly. Also, please do not bother suggesting running SFC.exe.

A:KB3023266 Fails with Error Code 80070005

The logs show the following problems...





Quote:
The following boot-start or system-start driver(s) failed to load:
StarRAM
ysyfer








Quote:
The Trend Micro Client/Server Security Agent service failed to start due to the following error:
The system cannot find the file specified.


DiskKeeper appears to be causing registry problems on shutdown

Without the logs, that's as far as I can go.

Read other 9 answers
RELEVANCY SCORE 58

On an Asus laptop with Windows 8 preinstalled, I have secure boot on, AV off, but every time I try to install the update from the Windows Store I get as far as:
Getting the update ready
This App wasn't installed, - view details.
Something happened and the Windows 8.1 couldn't be installed. Please try again. Error code 0x800703f9

I've tried installing with nearly every non-windows process disabled, but that doesn't help. I've Googled the error number, but although I found instances of it (back to Vista), I couldn't find what the error was or anything helpful.

A:8.1 Upgrade fails, Error Code 0x800703f9

I've also experienced this issue. I know that on my system I managed to partially break the Windows bootloader and I've assumed that's the source of the problem, having tried a lot of other potential resolutions that haven't worked. I've tried repairing the bootloader without success so I think it's going to take a "refresh" or reinstall to solve. I don't have time to do that at the moment though so I can't confirm that that will work (I may not do it in the near term anyway because I don't trust it not to nuke the dual booting Linux partition on the same disk... which is how I managed to damage my bootloader in the first place :P)

Read other 3 answers
RELEVANCY SCORE 58

Hi, trying to install alps tpad drivers to get multitouch on win7 x64 dell laptop. the installer tries to load "Microsoft .net 4 client profile" but it fails with error (from log)

"MSI (C:\3b228d38aff65874c154c648\netfx_Core_x64.msi) Installation failed. Msi Log: Microsoft .NET Framework 4 Client Profile Setup_20130915_191425624-MSI_netfx_Core_x64.msi.txt


Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:01:24)."

I have also tried to install latest .net4 downloaded from ms downloads, but get the same error.
The multitouch worked fine in win8 (which i hated) but this is a very clean install ( partitions removed and reformatted) of win7 ultimate, sp1 loaded. I updated as per ms instructions for all win7 updates it said i needed (not counting the Office ones i don't want). I've spent many hours now and any help would be appreciated.

A:.net 4 installation fails with error code: (0x80070643)

  
Quote: Originally Posted by mikep


Hi, trying to install alps tpad drivers to get multitouch on win7 x64 dell laptop. the installer tries to load "Microsoft .net 4 client profile" but it fails with error (from log)

"MSI (C:\3b228d38aff65874c154c648\netfx_Core_x64.msi) Installation failed. Msi Log: Microsoft .NET Framework 4 Client Profile Setup_20130915_191425624-MSI_netfx_Core_x64.msi.txt


Final Result: Installation failed with error code: (0x80070643), "Fatal error during installation. " (Elapsed time: 0 00:01:24)."

I have also tried to install latest .net4 downloaded from ms downloads, but get the same error.
The multitouch worked fine in win8 (which i hated) but this is a very clean install ( partitions removed and reformatted) of win7 ultimate, sp1 loaded. I updated as per ms instructions for all win7 updates it said i needed (not counting the Office ones i don't want). I've spent many hours now and any help would be appreciated.


Hi mikep,

Welcome to Seven forums.

Please make sure that you clean boot the system by following the steps below:

Troubleshoot Application Conflicts by Performing a Clean Startup

If aany firewall or antivirus installed then disable the same and check again. Please check these articles which would be helpful:

Error codes

I get error code 0x80070643 when installing .Net Framework 4.0 on - Microsoft Community

Kindly update your system s... Read more

Read other 9 answers
RELEVANCY SCORE 58

Hi
I been trying to install update KB950125 but it keeps failing with error code 80070020.

I've tried disabling all non MS services, disabling my McAfee security centre, downloading the individual file for a single install all no luck.

I've also tried in safe mode but the installer won't run at all then.

Once windows update actually said it was successfully installed but the history said it failed and it was still on the list to install.

Any help will be very much appreciated!!

Read other answers
RELEVANCY SCORE 58

I m trying to enumerate the DFS namespace and folders hosted by the DFS server using NetDFSEnum API
But API call fails with error code  87 (ERROR_INVALID_PARAMETER)
It works only when i pass \\DFSserver\Namespace name as first argument to api call, It didn't works if i just pass the \\DFSserver name as first argument (it worked on few servers)
Could someone please advice why it didn't work 



 

Read other answers
RELEVANCY SCORE 58

Can this error code be corrected so that I can download Vista update KB937287?

A:Vista Fails With Error Code 800736cc

Hi, this might help you. I found it while searching google for your problem. http://forums.techarena.in/windows-update/674767.htmRegards,Adam

Read other 1 answers
RELEVANCY SCORE 58

Running Win 8.1 Pro 64bit and I have been trying for over 2 weeks to install KB3008923 - tried 8-10 times. Everything seems successful until the restart and then at 67% complete it bombs out and undoes everything. Have tried downloading and running manually (same results) and have tried the Windows Update Diagnostic Tool. The diagnostic tool finds several errors and says they are "fixed" but it lies. I can run the diagnostic several times - either restarting between times or not) and it still finds and "fixes" these same errors. And no luck getting 3008923 to take either before or after "fixes" and restart.
Error Code for the Update is 800F0922 and I've attempted fixes outlined for it including resizing the System Reserved Partition in case it was too small. Still no joy.
Running Norton Internet Security so don't know if it's got something locked out or not. I am logged in as an Administrator, so I assume that the Diagnostic and Updates run at sufficiently elevated privileges so I'm not sure where to go from here. Any help would be much appreciated.

After a week waiting for reply, I guess I'm the only one so afflicted, so guess I'll have to install an old system image, see if it'll update and start arguing with Microsoft about why I'm having to reinstall Microsoft Office 2013 (downloaded product) within a month of initial installation.

Read other answers
RELEVANCY SCORE 58

For about the past two months Windows update has failed to run. If I try to run it manually it just sits there spinning its wheels. It does not appear to end or produce an error code.
I have seen the message "could not check for updates automatically"
I've been to the MS site and downloaded both
MicrosoftFixit.wu.RNP.6329995410378136.2.1.Run.exe
and
WindowsUpdateDiagnostic.diagcab
and the third party
Repair-tool.exe by ParetolLogic
but none of these fix the problem.
Today I have run SURT as instructed and the output from sfc /scannow is attached.
Update is still refusing to do anything.

A:Windows 7 update fails. No error code

I see no attachments??

Read other 9 answers
RELEVANCY SCORE 58

Having problem with installing Cumlative Security Update for Internet Explore 7 in Window Vista Home Premium.
Message is "Windows Modules installer stopped working and was closed. A Ploblem cased the application to stop working correctly. Windows will notify you if a solution is available".
Error code is 800F0902. I went microsoft web site and elsewhere, tried any solusion I found in forum, such as deleting everything in C:\Windows\SoftwareDistribution. But didn't work.
Anybody knows how to solve this?
 

Read other answers
RELEVANCY SCORE 57.6

Security Update for Windows 7 for x64-based Systems (KB3033929)

Installation date: ?3/?11/?2015 8:57 AM

Installation status: Failed

Error details: Code 80004005

Update type: Important

A security update. . .

I can't find any info on this error.  Tried the update twice and both times it failed.

A:Update KB3033929 fails with error code 80004005

You may want to try the following:
1) Running the following FIX-it (for resolving WUS issues)
  LINK:  ~http://support.microsoft.com/en-us/kb/971058 

2) Then change windows update to "manual" update mode (as aposed to install updates automatically)
3) Scan for updates
4) Uncheck and then "hide" KB KB3033929
The update should no longer download or install going forward. 
You can then revert the WUS to ?automatic? if you desire (recommended). 
Perhaps MS will FIX and re-release this in the future. 
At that point you could choose to ?unhide? the patch and then 
try to reinstall it at that time.

Read other 95 answers