Over 1 million tech questions and answers.

PCI or Pciex4 controller cards for sata II to sata III for 6GB/s ssd

Q: PCI or Pciex4 controller cards for sata II to sata III for 6GB/s ssd

I've installed a ssd capable of 6GB/s on my sata II board and was wondering, if there were controller cards that could be used with one of the two slots mentioned to get the full 6GB/s speed from the ssd if so, any recommendations would be appreciated. Thanks!

RELEVANCY SCORE 200
Preferred Solution: PCI or Pciex4 controller cards for sata II to sata III for 6GB/s ssd

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: PCI or Pciex4 controller cards for sata II to sata III for 6GB/s ssd

I've had experience with only one card (LSI 9211-8i, way overkill for your purposes) but, based on my experience with that card, to be able to boot from them (not all cards can be booted from), you would have to install the card during the installation of Win 7. Also, cards have their own BIOS that have to be loaded in addition to the OS and the MOBO's BIOS or UEFI so you probably wouldn't gain much, if anything, in boot time (more likely, overall boot time will be longer, as with my HBA card). You may gain faster program loading, though.

Read other 3 answers
RELEVANCY SCORE 98

I've been looking around lately trying to find a good Serial ATA Controller card for my system because the onboard one is broken/nVidia. I have two SATA devices that will utilize the card so I need two internal ports and PCI-E x1 bus to support SATA-II 3.0Gb/s speeds. The problem is, the PCI-E x1 slots are only 2.5Gb/s so I'm just wondering if the controller card is going to bottleneck transfer speeds. I figure buying a SATA controller rather than a new motherboard would be far more practical so I would appreciate any help or suggestions. Thanks in advance!
 

A:SATA Controller Cards

EXCellR8 said:





... I need two internal ports and PCI-E x1 bus to support SATA-II 3.0Gb/s speeds. The problem is, the PCI-E x1 slots are only 2.5Gb/s so I'm just wondering if the controller card is going to bottleneck transfer speedsClick to expand...

IMO, you'll never see the difference between 2.5gb/s and 3.0gb/s
 

Read other 2 answers
RELEVANCY SCORE 96

I have a motherboard with two SATA ports. I'm using one port for a Combo drive. I was thinking of creating a RAID 1 array. However, I need the one SATA port for the Combo drive since it doesn't work with IDE. So I thought of adding a PCI SATA controller card for additional SATA ports.
I contacted my motherboard manufacturer about this. They informed me that I cannot do this. They say the MB bios rom does not have space to add another SATA controller. I can accept this.
However if this is true of my MB why do the PCI SATA controller cards continue to sell? The cards tell you which OS to use but not the MB's.
I was of the impression that PCI cards were like standalone devices that would work with almost any MB that has PCI slots. Am I wrong? Evidently I am.
Anyone know about this restriction? Any way to overcome it?
 

A:Solved: Will SATA Controller cards ?work

Read other 16 answers
RELEVANCY SCORE 91.2

I have a DIY box with an Asus P5K-E mobo that provides SATA II ports. I upgraded to a pair of Samsung 850 EVO ssds and naturally got a great speed boost. Now I am getting greedy and thinking about doubling my gains with a SATA III controller card. I have been reading online and I am seeing indications that I may not get much if any speed boost that way. Would those of you experienced with doing what I am contemplating please chime in and tell me if you achieved improvement and if so what card did you use? I am running Windows 10 Pro and Windows 10 Home, one on each ssd, no RAID is involved.

Read other answers
RELEVANCY SCORE 90.4

I Can't Install a sata hard disk with a PCI sata controller card.?
My mb is MSI KT4V with AMD athlon 1800.My bios is AMI.
There is no option in my mb for a sata hard disk so i brought the sata pci cotroller card.
In post it shows the raid in my pci slot but cant detect my hard disk. It is a Segate 7200 rpm 160 gb hard disk.My sata pci controller card come with a driver cd but i cant install its driver in dos mode. and i think its for the windows version.
How can i install the single sata drive in my comp.
please help me...
 

A:Can't Install Sata Hard disk With PCI SATA controller card

Probably some fakeraid BS..
You have to enter the RAID BIOS and configure the drive as a RAID0 array or something similar. If it doesn't detect the drive in the RAID BIOS either, look over all your cables. Make sure you have power to the hard drive and suchlike.
 

Read other 8 answers
RELEVANCY SCORE 88

Perhaps not a question for sevenforums, but I'd figure you guys would either have the answer, or be able to direct me to the answer. I purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?

A:SATA-II Drive on SATA Raid Controller?

SATA II drives are typically not backwards compatible with SATA I ports, especially on add-in cards UNLESS they have what is called "autospeed negotiation". This determines the max speed of the drive and tells it to compensate if it's too high (use SATA 1 vs 2). Unless there is a jumper on your drive, which it doesn't sound like there is, then the add-in card does not have autospeed negotiation. This is taken from Problems encountered installing SATA 3.0 Gb/s hard drives on SATA 1.5 Gb/s controllers.

I suggest finding an addin card that supports SATA II like this card: Newegg.com - Rosewill RC-211 Silicon Image 2 port SATA II PCI Express Host Controller Card(RAID 0/1/JBOD)

Read other 5 answers
RELEVANCY SCORE 88

Hello. Got a question and I do not know the answer nor can I find it.

The mainboard on my setup is a BIOSTAR TA790GX128M. I currently have 4GB DDR PC6400 memory (2 sets of 2X1GB Matched Sets) that I am upgrading to 8GB of DDR PC6400 memory (2 sets of 2X2GB Matched Sets) as I am getting ready to install Win 7 Pro 64 bit and I wanted the extra memory. This board has 6 SATA II slots limited to 3Gb/s. As I have an external drive that I use for storage (1TB and it is almost full with my .wav music files from my digitized LP's), I got a Speed Dragon PCI Express Combo Card so that I can use eSATA function on the drive instead of USB to connect to the computer (eSATA being faster than USB V2.0). The card says the PCIe is limited to 2.5Gb/s but I have read where the SATA II ports, even though listed as 3Gb/s, operate at a much lesser speed.

I know I need to upgrade my mainboard/cpu/memory to current standards, but I can't do that right now. It will be about a year before I can upgrade the MB/CPU/Mem.

This controller card is in the PCIe slot (one of 2 - PCI Express Gen 2 X 1) and not only does it have the eSATA port but there is also a SATA II port on it as well.

I am getting a SSD that is SATA III (Samsung EVO) for the new OS and am wondering if I should hook it up to the SATA II port on the PCIe controller card to use the PCIe slot instead of hooking the SSD to one of the 6 SATA II ports on the mainboard. Four of the 6 ports are already in use (2TB HDD, 2TB HHD, 350GB H... Read more

A:SATA II or SATA II via PCIe Controller Card

Read other 10 answers
RELEVANCY SCORE 84.8

Hi,

My MB supports only SATA 2 but in my city, the HDD SATA 3 is more cheap than SATA 2. If I buy the HDD SATA 3 it will work with my MB SATA 2 controller?

A:HDD SATA 3 (6.0Gb/s) works with SATA 2 (3.0Gb/s) controller???

Yes.

Read other 5 answers
RELEVANCY SCORE 84.4

Hi,
I recently bought Lenovo Y410 notebook and it came with windows vista home premium. As i want to install WinXP in my notebook, i tried with the WinXP CD available with me. But it didnt work, so i tried slipstreaming using nlite when i came to know that intel ich8m sata 3 port SATA Storage controller 2828 is the name of my SATA controller. But even then i am not able to install winXP. After copying all the installation files, the installation process doesnt move forward after rebooting. I am not getting the blue screen, but booting is not happening even after all the installation files are copied.

In short, i just want to install winXP on my laptop.
Inorder to try the AHCI disabling option, i checked in the advanced tab of bios, but such an option was not at all available there.
Pls help.

Read other answers
RELEVANCY SCORE 80

At the moment my system is set up with a bootable 3 disk SATA RAID 5 array via the SIL3114 ports. I am trying to:

FIRSTLY add a new SATA hard disk to the Nforce4 SATA ports as a non-raid drive which I want to make the system's BOOT disk and make the existing RAID 5 array non-bootable.

SECONDLY add 2 new SATA drives in a RAID1 array via the NFORCE4 chip.
I have added the non-raid HD to the nforce4 sata ports and set the appropriate BIOS RAID setting for the single HD to disabled. This has enabled me to migrate boot files etc onto the new disk. I cannot however get the system to boot from this new non-RAID hard disk as it does not appear under the BIOS Hard disk boot setting - instead it boots with the Sil31114 SATA RAID 5 array. The only way to get the new hard disk onto the Hard disk boot list in the BIOS is to disable the BIOS IDE/SATA RAID setting completely. If I do this however it will not allow me to add a further RAID1 array to the nVRAID controller.

SO IS WHAT I WANT TO DO POSSIBLE ? PLEASE HELP.

Thanks very much

Steven
Hardware: k8nxp-sli with nf4 and SIL 3114 controllers, 6600GT graphics, XP mce 2005
 

Read other answers
RELEVANCY SCORE 78.4

Can anyone recommend a good PCI controller to use for 1 internal and 1 external SATA drives (would like SATA II if possible)?
 

A:PCI controller for SATA & E-SATA

Read other 7 answers
RELEVANCY SCORE 76.8

My Box config

AMD athlon 64bit 2800+

ASUS K8-VX Mother board

want to upgrade to 500 gigs or if possible to 1tb Sata HDD

Problem is
1) Mother board is old done almost 3 years
2) I don't know what version of SATA will be supported
Please advise

Thanks in advance for your answers

Regards
 

A:Need to upgrade to SATA Not sure if it is sata or sata II which my mobo supports

http://www.asus.com/search.aspx?searchitem=1&searchkey=k8v-x

I don't know why, but everytime I go to asus, they're hving site maintenance
Anyway see if you can click on Specifications there
 

Read other 3 answers
RELEVANCY SCORE 76.8

Hey Guys,

I've got two 500 GB HDs in RAID 0 configuration which have been working perfectly. They contain all my music, movies and personal docs which I've collected over the years.

I have only just made this configuration as I was trying to speed my PC up. I'd recently cloned my C: onto a 7200 rpm HD and while I was doing this I joined the spare HD that resulted to another one I had in the machine in RAID 0 and after a lengthy process of copying files back and forward from laptop drives etc I now had a perfecty working PC with a faster c: drive and faster storage area for my non-windows files (d: in RAID 0 - 930 GB).

Then, last night I get a windows update for a SATA controller. I install it thinking nothing of it, rebooted the pc and now my RAID drive is not recognised. It doesn't show up in My Computer or in Computer Management. I hoped this was just a driver issue. So I went into device manager and looked at all the SATA controller driver properties and there was only one (RAID controller) with the option to roll back - so I rolled this driver back and it made no difference. My RAID drive is not registering with windows.

When I boot the computer, after BIOS is finished doing its thing I get a RAID utility come up and it says my RAID configuration is healthy so I'm guessing (and praying!!!!) that it's just a driver issue and that it can be resolved without me loosing a whole heap of important (important to me) files.

Is there anyone out t... Read more

A:Solved: SATA controller/RAID controller update serious issue

SOLVED:

Went into Control Panel, Device Manager, Storage controllers and uninstalled all the entries in there, rebooted and windows reinstalled them all. Now back to my perfect little setup!

Woohoo!!!
 

Read other 1 answers
RELEVANCY SCORE 74.4

i bought a seagate sata hdd not to long ago and i had a big forum on how i thought it wasnt

working but i later found out that the problem was my motherboard so i am now wondering if

i could just get a sata card to fix this problem i want this drive to be my primary drive.
 

A:Sata Cards

You can install a controller card. If you want to boot from the card, make sure the one you choose is bootable.

I have had problems in the past with asus boards when you install a raid card. The system does not like to boot unless the onboard controller are disabled. The model was an a8v deluxe. It may or may not apply to your board.
 

Read other 1 answers
RELEVANCY SCORE 74.4

i am looking into sata II cards, and was wondering about the best sata II cards for my needs.

i guess all i really need is something that gives me the fastest/ best performance for 1 sata II drive on my asus p4pe mobo, the 3GB/s....

will anyone of these standard $50 cards do? what should i be looking for?

thanks!
 

A:best sata II cards

Will just any sata 2 card work for you? probably not, sata2 cards often have comapitability issues with various motherboards. so you need to research what cards work best with the chipset you have. personally I would go with a quality name brand card for the best performance and compaitability. And that generally means Promise or SIIG. stay away from the bargain, generic, cheap stuff.
 

Read other 2 answers
RELEVANCY SCORE 73.2

Please help.
I've been getting this message for about a month. However, after rebooting sometimes once, sometimes several times the computer eventually boots up. After reading multiple posts on similar issues, I went and got a new hard drive. I backed up all the files and was going to reinstall evertyhing from scratch onto this new hard drive. I took the old one out and put in the new one. I get the same message when it tries to boot.
At this point I swapped the drives again (the old one is back in).
I am at a loss.
Am I doing something wrong when I'm installing the new drive? Why am I getting the same message with this new drive?
System specs:
Inspiron 531
Vista
AMD Athlon 64 X2 Dual Core 5600+ 2.81 GHz
2GB RAM

Thank you.
 

A:no boot device available sata 0: installed sata 1: installed sata 2: none sata 3: non

Read other 7 answers
RELEVANCY SCORE 72.8

I have an ASUS P4P800-E Deluxe motherboard with only two SATA 150 ports. I already have 2 sata hard drives, one 200GB Seagate and another 300GB and want to add another drive but I don?t have any more open ports.

I have a Promise FastTrak 378 SATA RAID controller card built into the motherboard and I heard from another post that you cannot have two of the same type of SATA card (http://www.techspot.com/vb/all/windows/t-10218-SATA-QUESTIONS-onboard-amp-PCI-card.html). So I have a few questions about SATA 150/300 cards.

If I were to buy a non Promise sata card, let say a 2 port SATA 150/300 card, would I still be able to use the two onboard SATA 150 ports or would I need to buy a 4 port non Promise card?

I could also use some suggestions on SATA cards too. I don't plan on using any RAID features, I just want to use SATA hard drives. So if anyone can recommend what to buy or what not to buy, that would be awesome.

Thanks in advance
-DarnCrazy
 

A:Question about SATA 150/300 PCI cards (Could use some suggestions as well)

Uhm.. Your motherboard has a normal SATA controller and a SATA RAID controller, giving you total of 4 SATA ports. The RAID controller is capable of working with non-RAIDed drives too.

Of course both of the controllers work simultaneously. Why would they put two of them on the motherboard if they didn't?
 

Read other 2 answers
RELEVANCY SCORE 72.8

I want to add sata 3 ports via an add on card to my computer. I also want to buy an SSD. The end result would be that I could plug the ssd into the port on the add on card and get true ssd speeds. What I want to know is, if I went that route, would that happen? http://support.hp.com/us-en/document/c02668523 the link  to my mother board https://www.amazon.com/IO-Crest-Port-PCI-Express-SY-PEX40039/dp/B005B0A6ZS/ref=sr_1_3?ie=UTF8&qid=14... The link to a card I would consider to add. (not that I would know the difference between them.) Thanks in advance, Chef_D

A:Sata 3 add on cards and their speed releative to SSD

Chef_D What SHOULD happen, if you do that, is that you would then be able to boot Win7 from the SSD in very short time and have a faster running PC. There are two issues, however: 1) Booting from the card -- I have found, sadly, that the ONLY reliable way to know if your PC will boot from a particular card is to try it out.  In older PCs that did not have SATA booting, I had tried various cards and only SOME of them booted. 2) SSD speeds -- also, sadly, although there are RATED SSD speeds (i,e, SATA 1, 2, and 3), not all SSDs have the same performance results.  This can often be evident in prices of new SSDs, as they tend to clump into price ranges, depending on their real-time performance. A good site to check to see performance tests of SSDs is this one:  http://www.hardocp.com/ You should browse their site and look for performance tests they have run on SSDs.Good Luck

Read other 1 answers
RELEVANCY SCORE 72.4

Hello. I want an installed SSD, but the version of SATA is unknown. On the manufacturer's website there is no evidence of SATA bus. What's in this notebook Sata Sata 2 or Sata3?

A:installation SSD What's in this notebook Sata Sata 2 or Sata...

HI. Your computer comes out as SATA ... We can say that the generation of the equipment is SATA 3, being compatible on SATA 1,2,3. http://pcpartpicker.com/products/compare/MVWrxr,3kL7YJ/ Regards.

Read other 2 answers
RELEVANCY SCORE 72.4

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: Intel(R) Xeon(R) CPU X3470 @ 2.93GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 8183 Mb
Graphics Card: NVIDIA NVS 300, 512 Mb
Hard Drives: C: 223 GB (175 GB Free);
Motherboard: FUJITSU, D2779
Antivirus: Avast Antivirus, Enabled and Updated

Installed a Kingston SUV300S37A/240G SSD, in order to get the maximum benefit of the SATA 3 drive I've added a PCIE SATA 3 controller card.

System motherboard has only SATA 2 connectors. SSD works fine when connected to motherboard SATA 2 connector. In order to get the best performance from ssd I bought and installed a "no name" SATA 3 pcie controller card. With AHCI mode SSD connected to controller, boot ends with message "no operating system found". Next, installed a Syba SI-PEX 40094 IOCREST SATA 3 pcie controller card, same message, "no operating system found. During boot, with the drive attached to the controller card, bios sees the controller card and the ssd, but continues with the message "no operating system found".
 

Read other answers
RELEVANCY SCORE 72.4

Can I buy a SATA 3 controller for my ASUS P5KPL-AM SE motherboard so I can achieve maximum speed on my Corsair Force 3 SSD? Or would I need to buy a new motherboard for SATA 3?

A:SATA 3 controller

They (control cards) can be easily obtained, I've given you a couple of links to get started.

HP R620 OEM 2 Port SATA III Controller Card (Non-Raid) - Scan.co.uk

Startech 1x eSATA + 1x SATA 6 Gbps PCI Express SATA Controller Card (PEXSAT31E1) [PEXSAT31E1]=

Read other 4 answers
RELEVANCY SCORE 72.4

I want to set up my Dell Dimension 8400 to allow an eSATA 3.0 connection. Will my host controller reject my external drive if it is operating at 3.0 instead of 1.5?

If so, can I reset the controller to accept the 3.0 drive?

Thanks!
 

A:will my controller allow sata 3.0

SATA is backwards compatible. It will just run at the slower speed. Also I haven't heard of SATA 3.0 only 2.0, but I could be out of the loop.
 

Read other 1 answers
RELEVANCY SCORE 72.4

Hi,

I have quite a major problem that is restricting my workflow. I hope someone can help.

My system specifications are as follows: -

1 x ASUS M2N32 WS Professional Mainboard
1 x AMD Athlon 64 X2 AM2 Dual Core 5600+
2 x 1GB Corsair TwinX XMS2 Dominator DDR2 800MHz
1 x MSI GeForce 8800GTX HD (768MB)
1 x 250GB Seagate Barracuda 7200 SATA300 HDD
1 x Windows Vista Ultimate 64

I am unable to install drivers for the Serial ATA Controller that is displayed within the Device Manager and my HDD show up as an ST325062 0AS SCSI Disk Device. Even when I install the recommended driver for the Srial ATA Controller from the Windows Update website it still remains driverless. Now whether the following issues are related to this problem or not I am not sure, but I will state them here anyway.

After a certain period of time my entire system will freeze and I will have to reset my PC, although when I do it does not reset but powers down. This is continues if I use the restart command from the Windows Start Menu or automatically restart after the installation of a software package. This is extremely annoying. Having shelled out for the latest hardware in order to be compatible with Windows Vista 64 and then for this to happen is quite sickening. Can anyone help at all.

Thanks and Kind Regards

Gareth

A:Sata ATA Controller...

Try the VIA SATA/RAID controller
http://www.viaarena.com/default.aspx...=37&CatID=3000

Read other 8 answers
RELEVANCY SCORE 72

looking to add 2 or 4 port don't not need raid
seen some cheap cards out there prefer pci-e can use pci-x
want sata II 3gb/s
installing 2 more dvd burners bought deal on sata optic drives
anyone with experience with the 20 dollar cards or there abouts
 

Read other answers
RELEVANCY SCORE 71.6

I have installed a Tekram TR-822 SATA Host Adapter which is connected to a SATA 1TB HDD.
My problem is that now a screen shows up before windows boot thats says:

Code:
SiI 2332A SATARaid BIOS Version 4.2.12
Copyright (C) 1997-2003 Silicon Image Inc.

Press <Ctrl+S> or F4 to enter RAID utility
Primary Channel: ST31000340AS

It sits at that screen. It will not do anything even it i hit <Ctrl+S> or F4. I also cannot get into my Mobo BIOS because this screen overrides them. The only way to get passed it is to unplug the harddrive and then it flashes a screen that says:
Code:
SiI 2332A SATARaid BIOS Version 4.2.12
Copyright (C) 1997-2003 Silicon Image Inc.

Press <Ctrl+S> or F4 to enter RAID utility
Primary Channel: Not Found
Secondary Channel: Not Found
And then continues to boot windows.

I have tried altering the jumper settings on my HDD as well as numerous changes via setup (when the HDD is unplugged)
But whenever the HDD is plugged in, It sits at that screen and does not respond to any keystrokes.

Any help?
 

A:SATA Controller nightmare

Read other 8 answers
RELEVANCY SCORE 71.6

In our SBS we have a SATA controller card to manage 6 hard drives. The 2 SATA connectors on the motherboard are open. I recently bought a external drive dock that came with an internal/external connection to be plugged into the motherboard. When doing this and connecting the dock to the computer it would not recognize it. With the drivers not being an issue, is it possible that the motherboard SATA connections are void after adding in the controller card? I haven't been able to restart to check if they are disabled in BIOS, but wouldn't think they would have been.
 

A:SATA controller card

1. what make and model of Sata controller is it? What model Server is it?

2. Most Sata controllers are not hot pluggable, you must shut down the server, turn on the external drive then start the server, a pain I know, but most consumer Sata controller cards do not support hot plug or hot swap.

3, Consult the user manual for the card.

4. There will be a bios utility during post for the Sata card, this is what you will use to configure an additional drive.

5. It will be a layered bios, in other words there may be more than one bios that posts, the motherboard bios will post first, then any add in cards that have a bios will post, depending on what slot the card is in the order of the add in card post sequence, each bios post will should show you what keystrokes to use to enter them.

5. If you are not experienced with this advanced hardware, I suggest you get a consult before doing anything, you could destroy the raid array experimenting with settings and lose all your data.
 

Read other 1 answers
RELEVANCY SCORE 71.6

I'd posted here a while ago about my misadventures with Win 8 (attached thread). Basically, tried to remove a Win 8 Consumer Beta by installing Win 7 over it, and didn't work. I compounded the error by, in a series of missteps, essentially wiping the hard drive clean to the point where I get a "Operation System Not Found" error when I try to boot. I do see the hard drive in Setup (F2)

In the attached thread, someone was kind enough to tell me that I needed to install new SATA controller drivers so the HDD would be recognized. However, when I go to the link I was given (to an Intel download site), I cannot find any Win 7 SATA drivers there. I am most likely looking in the wrong place, or don't know what to look for.

Can someone help? How can I find which SATA controller driver I am supposed to download, and where do I find it?

System info:
Dell Inspiron 17R notebook
Fixed HDD: ST9750420AS-(S0)

********************************************************************************
MY OLD THREAD:

Hard drive not detected - bad breakup with Win 8 Consumer Beta

A:SATA Controller Driver - Where and Which?

Quote:
I do see the hard drive in Setup


If the HDD is showing in setup, no Sata controller driver is needed.






Quote:
The notebook has two hard drives - one 750GB SATA and a 32GB mSATA.


You need the raid drivers.

IRST acceleration cache
http://www.eightforums.com/installat...ion-cache.html

Intel links.
IRST acceleration cache
http://www.intel.co.uk/content/www/u...echnology.html
http://www.intel.co.uk/content/www/u...-software.html

Dell links:
http://dell.to/15Cz2AS
http://dell.to/13EbJpn

Read other 7 answers
RELEVANCY SCORE 71.6

So anyways, i want to flash my xbox 360 and i need to know which SATA controller out of this list is the right one,

and which port shall i plug my SATA cable (goes to the xbox) into


UMM my motherboard is an Asus M3N78

help is REALLY appreciated.

Read other answers
RELEVANCY SCORE 71.6

Hi, i'm trying to install XP on a SATA HD. I cannot seem to find these proper drivers which i need to let it do its thing. I have the Mobo CD. It is a Asus P4PE.

Any help wouold be great

Thanks
 

A:promise controller SATA win XP

we're sorted now don't worry!!!

It was to do with putting the driver files in the root of the floppy and not in the proper winXP directory
 

Read other 1 answers
RELEVANCY SCORE 71.6

Is WD10JPVX 1 TB HDD compatible for my laptop -- Pavilion notebook 15eoo7-tu  and does my laptop's BIOS and SATA controller can handle this format (WD10JPVX 1 TB HDD).

Read other answers
RELEVANCY SCORE 71.6

I have an HP a1230n with an ASUS Socket 939 motherboard and 200GB SATA drive running XP. The other day our power went out for no reason. When I restarted the machine it said "Disk Boot Failure..." After a couple of tries I got it started. After that it was harder and harder to get started, and now it wont boot at all. In the bios it does not even see that a HDD is present. Neither does the Windows Recovery Console. I put the drive in another machine and XP booted right up from it, no problem, and all my data was there. I put another drive with Vista on it in the machine and it was not recognized at all either.

I thought it was a BIOS problem. After a long story I was able to update the BIOS successfully. But it still does not see any hard drives. ???

Should I try getting a PCI SATA controller, or should I just get a new motherboard?
 

A:Can SATA controller on MOBO die?

Does the BIOS see the drive after you push the reset button or ctrl+alt+del at the error message to reboot? (Do not power off!) Does the HD actually spin up?

Maybe the PSU was damaged so that it can't supply enough power to spin ip the HD? Make sure you have no CDs in drives. Try the HD on another molex connector?

Yes, of course, any component can go bad..
 

Read other 3 answers
RELEVANCY SCORE 71.6

Hello,

My machine has both older and newer hardware, running win98 with plenty of ram and processor power. What I want to do is add a large, 320 gig SATA-150 hard drive to the mix using a controller card. I will want to put winXP on this drive and use it as a mutlimedia storage drive--mainly storing music files in wave file format. I'm new to SATA and I understand that now there is SATA II, which, if I understand correctly, provides an even greater data transfer rate.

My question is this: Will a SATA II controller card accept a SATA 150 hard drive or are we talking about incompatible interfaces? I might guess that this would work, but would like to know for sure.

You might be wondering why I wouldn't just get a SATA 150 controller card? Well, given that computer technology is always being improved upon with new standards on the horizon, I just wouldn't want a 320 gig SATA drive to become obsolete too quickly. Comparabley-sized SATA II drives are a little pricey, so I won't be going there right now. At least I'd have the appropriate controller card when SATA II becomes the norm.

Any input about SATA compatibility and any other info on this that you can give me would really be appreciated.

Thanks,

Tim
 

A:SATA II controller card

SATA150 and SATA300 devices are interchangeable no problem.

Mind you, there is virtually no speed difference between SATA150 and SATA300. The interface speed is meaningless, it is the hard drive itself that dictates the data rates. Plus, there are no desktop drives that can do sustained transfers over 100MB/s, so it will be many years before SATA150 actually becomes a bottleneck (perhaps when we get hybrid hard drives with huge solid state caches).
 

Read other 1 answers
RELEVANCY SCORE 71.6

I have a Dell E310 I have 2 SATA ports in the board that are used up needed more ports I installed SAta PCI card and as usual windows detects and ask for drivers did that then it restarts eveyrthing good in device manager...

I turned off PC to move my HDD to check to see if card works and windows doesnt detect my HDD its now missing when i goto bios and select RAID controller on I get a waqrning that I might have to reinstall the OS to have raid on which in this case it did that missing NTLDR...

is there any other way besides installing OS and select raid ontroller option if so no big deal i'll do that just so it's all good...
 

A:SATA controller question for XP pro SP3

When you enable RAID, then the controller by the RAID BIOS and not the main BIOS. So i is clearly normal that the main BIOS wont see the drive. otherwise, you won't be using RAID...

Right click "my computer icon", then manage. In disk management, the new disk (created with the 2 in the array) should be there. Partition, format
 

Read other 2 answers
RELEVANCY SCORE 71.6

Hallo

First of all greetings to you all, as you can see I?m new in here, but I do hope that there is someone in here that can help me.

I have an older computer, so when I bought a new hard drive I also bought a PCI controller so I could buy a SATA hard drive.

My problem is this.

To transfer files to and from the disk no problem.
Browsing the HD when I had some files there seemed ok, I couldn?t notice any problems.
But when I try to watch a small movie in DivX on that drive, my computer freeze so I have to reboot. I have tried the same movie file on my other drive, and it opens and plays perfect.

The controller I bought is this:
http://www.sunsway.com.hk/products/pci-sata.html

The hard drive I bought is this one:
http://www.samsung.com/Products/Har...es/HardDiskDrive_SpinPointTSeries_HD401LJ.asp

It?s formatted as standard. I haven?t any partition on it, its just on big disk of 400 GB.

It?s a jumper back on the hard drive that in some rare cases have to be used.
It?s a SATA 1.5GB/s speed limit jumper setting (Only for SATA 3,0GB/s products)

Well I tried this jumper, then my computer freeze right away when I opened my new HD.?

I hope someone can help me out.

Regards
Thomas
 

A:Problems with PCI SATA controller

Well, if you had asked beforehand, we would have told you that SiI products are crap

Try updating the card's firmware and download the latest drivers from the internet.
 

Read other 5 answers
RELEVANCY SCORE 71.6

I found the drivers but it said I didnt have a device in my computer..

please help..



Code:
Name: Silicon Image SiI 3112 SATARaid Controller
Device ID: PCI\VEN_1095&DEV_3112&SUBSYS_61121095&REV_02\4&3B1D9AB8&0&5840
Driver: C:\WINDOWS\system32\DRIVERS\SI3112r.sys, 1.00.0000.0028 (English), 2/24/2003 14:21:12, 85265 bytes
Driver: C:\WINDOWS\system32\DRIVERS\SiWinAcc.sys, 1.00.0000.0004 (English), 2/12/2003 14:37:48, 9600 bytes
I found that, so I thought I should update now it says i dont have a device on my computer, it's causing freezing in a few games and I need to fix it

Read other answers
RELEVANCY SCORE 71.6

...for function and any defective processing?

Thanks!

[XP]
 

A:Way to check a MB's SATA Controller?

Read other 8 answers
RELEVANCY SCORE 71.6

hey guys, is there a way to known if the serial ata controller on my motherboard is defective?

cause since 3 days now, my system is totally freezing while i'm burning or transfering file from one hard drive to another...

I ran Western Digital diagnostic's extended test on all my 3 hard drives, and they are OK.

My serial ata cable are fine also.

So the only thing i have in mind is that my sata controlelr on the motherboard is scrap.

my motherboard is a DFI lanparty ut nf4 ultra-d

my OS is windows xp pro with sp2

is there a program that will bench/test the serial controller ont he motherboard ?

or is there a visible way by looking at the board to see if it's defect or not?

tanks in advance
phil
 

A:SATA controller might be messed up?

Read other 8 answers
RELEVANCY SCORE 71.6

I put together a cheap build for my father. It worked for about a month and then we couldnt boot into Windows 8. after testing ram, hard drives, and attempting to re-install different versions of windows. We had noticed that BIOS was detecting the SATA hard drives in the right spot, but the blue-ray player was being detected in the wrong port, and the DVD-player wasn't even showing up at all.

We came to the conclusion that it was a defective board and that we should buy a new one. After buying the same board the BIOS read the SATA correctly until we tried installing windows 8. and got the same error massages as before telling us it was a NTFS problem. We checked the BIOS and the same exact problem was appearing.

Why could this be happening? Is there an incompatibility between hardware on the board or is it like this for all of this board?

specs:
motherboard - MSI 970A-G43
CPU - AMD FX-4300 3.8GHz Quad-Core
RAM- 4 4GB Corsair Vengeance
HDD - 2 Seagate Barracuda 1TB 7200RPM
Video Card - MSI Radeon R7 250 2GB
Blu-Ray - LG WH16NS40
 

A:SATA controller problems

Win8 installs it's uefi bootloader and that sometimes causes devices to appear in a different order than what you expect.

I never build with msi boards however I would make the following bios/uefi changes;
1 If you are going to install win8, then have secure boot enabled. If you are going to install win7, then I usually turn it OFF.
2 As I said I never use msi boards and the manual does not show an option to config ports to both ahci and ide as an asus or gigabyte board allows. So set them to ahci mode [if you do have an option to set ports 5&6 to ide mode, do so]
3 Connect your hd to ports 1&2. Connect sata optical drives to ports 5&6
4 Save settings and restart. Boot with whatever install disk you choose and install windows.
 

Read other 2 answers
RELEVANCY SCORE 71.6

Hi, I have a really convoluted problem, which I think boils down to me having lost the control sector in my HDD after a format. I think!? I'll explain the sorry chain of events.

I have 2x Maxtor 6L30050 and an ASUS A8N-SLI Premium. I had an install of Vista on the machine, which was not working out for me - went to XP, but that install messed up due to the disc (not all data wrote). Went for an install of 2K I had lying around just to get something on there and in formatting the disk for this 2k install, I think I lost something.

Originally, the OS setup screen looked like this:

Cartitional (NTFS) xxxxxxMB xxxxxxMB
Unpartitioned Space 8MB

Dartitional (NTFS) xxxxxxMB xxxxxxMB
Unpartitioned Space 8MB

The 2k format I did for the (failed) 2k install was NTFS to NTFS (Vista to 2k stylee I guess?), but when looking at the HDDs in the OS setup after the 2k instal format, I then got this:

Cartitional (unknown) xxxxxxMB xxxxxxMB

Dartitional (NTFS) xxxxxxMB xxxxxxMB
Unpartitioned Space 8MB

I'd lost the first unpartitioned space on C, and it's saying 'unknown' as the file structure.

Long story short - the 2k install didn't work. I got a better copy of XP, but when trying to install this, after selecting the disk (C and copying the install files - after the reboot, a message comes up 'A disk read error occured'.

So I have no o/s on there and the HD seems unusable.

Have I broken my HDD? Or do I need t... Read more

A:Not sure if need SATA controller, chipset, etc...

The 6L30050 is a Sata, therefore you don't need the F6 driver.

Beside it never hurts to try.

Plus I runs A8N-SLI SE, so you can try your luck on the cd.

Try look for the IDE driver and it is should be there.

Plus, if this problem insists, you may RMA these hard drives for a free replacement if it is under warranty.
 

Read other 7 answers
RELEVANCY SCORE 71.6

I purchased this add-on card for my older AMD 2400mhz 1gb ram box. This is the computer with Win7 on the 500gb Pata IDE hard Drive. I wanted to add a 1TB Sata drive since the MB does not have sata. The card has 2 sata connections, 4 USB ports, & 1 IDE connection. It just plugs into an empty PCI slot. For some reason Win7 does not detect the card & when I try to install the drivers Win7 says cannot detect any hardware. The card has VIA VT6421A chipsets.
Description:

Power by VIA Chip - SATA RAID + ATA133/100 + USB
Internal Interface 1 x Serial ATA 150 + 1 x ATA 133
External Interface 1 X SATA 150
External Interface 4 X USB 2.0 Port
2 Ports SATA supports RAID 1/0 0+1, and PIO mode 4/3/2/1/0
Support 24 bit hard disk mode >147MB (Please check with Microsoft website for enable 24 bit Mode)
Support IDE bus Ultra DMA at ATA 133/100Mbytes/sec PCI burst rate
Support maximum PCI bus master data transfer rate of 266MB/sec.
PCI interrupt sharing and coexists with main board IDE controller
100% Plug and Play
100% Brand New
Requirement Support Windows 95, 98, 98SE, ME, NT4.0, 2000 and XP
Here is the item on eBay

PCI 3 in 1 Card 2X SATA RAID + 1X IDE ATA 133 + 4X USB - eBay (item 160309427900 end time Jan-14-09 10:01:13 PST)

A:Sata PCI I/O Controller add-on Card

  
Quote: Originally Posted by McBlzr


I purchased this add-on card for my older AMD 2400mhz 1gb ram box. This is the computer with Win7 on the 500gb Pata IDE hard Drive. I wanted to add a 1TB Sata drive since the MB does not have sata. The card has 2 sata connections, 4 USB ports, & 1 IDE connection. It just plugs into an empty PCI slot. For some reason Win7 does not detect the card & when I try to install the drivers Win7 says cannot detect any hardware. The card has VIA VT6421A chipsets.
Description:

Power by VIA Chip - SATA RAID + ATA133/100 + USB
Internal Interface 1 x Serial ATA 150 + 1 x ATA 133
External Interface 1 X SATA 150
External Interface 4 X USB 2.0 Port
2 Ports SATA supports RAID 1/0 0+1, and PIO mode 4/3/2/1/0
Support 24 bit hard disk mode >147MB (Please check with Microsoft website for enable 24 bit Mode)
Support IDE bus Ultra DMA at ATA 133/100Mbytes/sec PCI burst rate
Support maximum PCI bus master data transfer rate of 266MB/sec.
PCI interrupt sharing and coexists with main board IDE controller
100% Plug and Play
100% Brand New
Requirement Support Windows 95, 98, 98SE, ME, NT4.0, 2000 and XP
Here is the item on eBay

PCI 3 in 1 Card 2X SATA RAID + 1X IDE ATA 133 + 4X USB - eBay (item 160309427900 end time Jan-14-09 10:01:13 PST)


This card works with Vista x86 and x64. Usually you do not need to install drivers, although the drivers are on the CD or here :-
http://drivers.softpedia.com/progDow...oad-... Read more

Read other 4 answers
RELEVANCY SCORE 71.6

Does the Touchsmart 15-f010WM notebook have a SATA III (6 Gb/s) controller?  Thanks.

Read other answers
RELEVANCY SCORE 71.6

First of all sorry if i'm thick, i'm not exactly "in the know" when it comes to more techinical computer problems....... I have recently bought a 300g sata hd and a sata controller card. I am trying to set this up using windows xp on my original hd as it won't recognise the new hardware at all in bios. When windows loads up it recognises the new hardware (SATA card) and installs the drivers but will not recognise the new hd. There is a "Silicon Image SATA Controllers" icon in my control panel but when I click onto that there are no available controllers. I have tried uninstalling/reinstalling the drivers but the problem persists. I have dl a flash update for the bios but as it wont recognise the card this is useless at the moment..... Anyone with half a clue please let me know.........

Many thanks in advance
 

A:SATA PCI Controller problems

What you need to do is click on your start button, then click on the run, and type diskmgmt.msc. Then locate your new hard drive and right click on it and partition it then right click on it again and format it.
Once that is done it should show up in Windows and work perfectly well.
 

Read other 6 answers
RELEVANCY SCORE 71.6

PCI SATA controller be bootable on a Dell and be recognized in windows installation. if there is any suggestion please post me a link or a product that i can buy under $35
its a Dell Dimension 4700C (Slim, Compact)
it does have a PCI but it is used by a phone modem so i can remove it but it needs a SATA controller that is bootable and does not require a driver so windows installation sees it and i do not have a floppy drive in the computer mainly do to its small slim design and there is no way of getting one in there.

just send me links of one that is bootable and can be detected in bios and in Windows installation
 

Read other answers
RELEVANCY SCORE 71.6

Which Sata Controller should I connect my SSD to? I will have the OS installed on it.

My GA EX58 UD4P has two sata controllers, one in the ICH10R that controls six sata ports and another sata controller, the Gigabyte SATA2, on a separate chip that controls two more sata ports.

I have two other HDDs, one internal 80GB sata and one 500GB sata in a docking enclosure that is not always connected.

My mind say that I should have the SSD on a controller alone and the other two on the other controller but what do my mind know.

A:Which Sata Controller Should I Connect SSD To

Connect it to SATA_0 on the ICH10R

Read other 5 answers
RELEVANCY SCORE 71.6

My external hard drives are SATA III, but they connect via a SATA II controller card, to my SATA II motherboard. I'm wondering if the hard drives would perform much better if they were connected via a SATA III controller card to the same SATA II motherboard? A card such as this one"

http://www.cwol.com/serial-ata/esata...es3pcie212.htm

A:SATA III Controller Card

I have an ASUS U3S6 that my C300 ran off (past tense because flashing the BIOS made it un-bootable) Read speeds were def higher on the card but I gotta say, overall, I can't tell any difference now I'm running it off a SATA 2 port.
EDIT: I posted some benches here (SATA 2) Show us your SSD performance

Read other 9 answers
RELEVANCY SCORE 71.6

i have a compaq presario 6400nx and i wanted to add a western digital 500gb sata hard drive so i got a pci to sata controller card. when i put the card in it went through and installed all the drives but i don't see my drive anywhere. i can feel it spinning so it is powered up. i am running xp with sp3. any ideas on something else i need to change or why it is not working??
 

A:Trouble with SATA controller

also i am only using this drive for storage. i have a ide drive that i have windows on. also my computer does not have andy sata ports that is why i had to get the card
 

Read other 23 answers