Over 1 million tech questions and answers.

ideapad z710 boot loop at logo startup

Q: ideapad z710 boot loop at logo startup

I bought a new SSD and put it on the HDD place and put the HDD instead of the optical drive.Everything works perfectly only at start of the computer every time the lenovo logo loads and then restarts and shows the logo again in an infinte loop. Until I pres fn+f12 and enter the first option which is boot manager sdd.I tried to reinstall the windows it doesnt work.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: ideapad z710 boot loop at logo startup

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 75.6

Hi! When I start my laptop, I get this message "EFI Network 0 for IPv4 (54-BE-F7-53-1F-14) boot failed". The laptop is 4 months old. How would I get it to work again? pls!

A:ideapad z710 boot failed

Hi,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that your Z710 Laptop is not booting to Windows and displaying initial error, I suggest you to access the BIOS menu and change the first boot device to HDD (Hard Disk Drive) and check if the issue persists. To access BIOS menu turn OFF the computer and then press the NOVO button which is located beside the power button and select BIOS utility, then under boot menu change the HDD to first boot device under boot order. Now click on F10 to save the changes.
 
Do post us back if the issue persists
 
Best Regards

Shiva Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 3 answers
RELEVANCY SCORE 75.6

I'm trying to Install Debian GNU/Linux on my Windows 8 Ideapad Z710, and I can't even get my laptop to boot from external media. From the InsydeH20 Setup Utility, I've so far disabled Secure Boot, set Boot Mode to UEFI, enabled USB Boot, enabled PXE Boot to LAN, and set my EFI boot order to 1) EFI Network 0 for IPv4, 2) EFI Network 0 for IPv6, then 3) Windows Boot Manager (no other options). I'm not actually trying to boot from a network, I just want to boot from the onboard DVD drive or my USB DVD drive. When I boot with these settings, I get the error: EFI Network 0 for IPv4 (...) boot failed, then a similar one for IPv6, then it boots to Windows. Why can't I boot from DVD or USB? Another thing I've tried is setting Boot Mode to Legacy Support and Boot Priority to Legacy First (with Secure Boot disabled) which results in my laptop booting to straight to Windows even when USB ODD is first in the boot order. Please tell me how to boot to a Linux DVD or USB on this machine! This was major purchase for me, and if I can't install Linux on it, this laptop is totally useless for me. Please respond.













Solved!

Go to Solution.

A:Can't boot from disk or USB on Ideapad Z710

Please can anyone help? I just want to boot from a USB or DVD. Is it possible on this machine? I'm willing to do whatever it takes to get this to work.

Read other 5 answers
RELEVANCY SCORE 75.6

I can not find the Secure boot option in my bios although it is uptodate. Can anyone confirm the option exists on a Ideapad Z710?

Read other answers
RELEVANCY SCORE 74.8

After a Windows update the device restarted, it showed the Lenovo logo for a couple of seconds with the loading circle at the bottom then flashed a small window in the top left side for a split second and then showed that windows is returning to the older version, that stays fro maybe 2 seconds and then it goes to the logo again and is just stuck in that endless loop, I restarted it many times but every time I do it just does the same thing, please help all my work is on my laptop and I've tried entering the bios with F2 on the logo but it doesn't work

Read other answers
RELEVANCY SCORE 74

I am not able to boot from usb because of security options.Solution would be to switch off security boot in bios, but this option is not available.Bios is up to date.Thanks in advance!

Read other answers
RELEVANCY SCORE 70.8

Since (automatically) downloading a windows 10 update and restarting twice, my laptop has refused to boot up. It won't boot normally, and using the novo button either gives me boot/BIOS/setup options, or sends me to windows repair, though I have to spend anywhere bewteen 10-60 minutes looking at the lenovo logo before this actually happens. I've tried a number of different bios and boot changes to no avail (though I will admit that I've been following advice fromforums etc, and not all of them match up to what I'm seeing on my own screen). Attempting any of the Windows repair options just restarts the computer and ends up back at windows repair. Going back to the previous version fails, as does attempting to repair problems. Changing restart options dosn't actually let me (dis)able anything from that screen, and instead says that it will let me upon restarting (it doesn't). I've also drained my battery (until even the LED battery doesn't flash when attempting to turn on), unplugged my laptop, and held the power button for 10, 20, and 30 seconds. I don't have any restore points saved and I really don't want to do a clean install or a system reset, as I have a couple of weeks worth of work that I would really like to save (I try and backup once a month, more fool me I suppose). I don't really care about fixing this laptop as it's done this after only a little over a year (the fastest I've ever had a laptop fail!). What I really want is to get ... Read more

Read other answers
RELEVANCY SCORE 70

Hi there folks.
I'm having a issue with startup repair continuing to loop, only to then say that it cannot repair this computer. I've tried safe mode as well as most of the options from the F8 menu. Nothing breaks the cycle.
When starting the machine it will go up until the green moving bar above Microsoft Corporation, show a mouse arrow and then double twitch real fast and go to startup repair. I've pressed Esc after starting the machine, gone through the startup menu system diagnostics and passed all the test as well. I didn't have any restore points setup due to the enormous amount of hard drive space they seemed to take up.
I know not what to do anymore, what can I do to get her back to normal?
She's a 64bit Vista HP Laptop

Read other answers
RELEVANCY SCORE 66.4

My girlfriend's lenovo ideapad Z710 won't boot up past the Lenovo splash screen. She turned it on this evening and it just keeps refreshing to the Lenovo splash screen. She can't access the bios as far as I know, and she tried the CMOS battery thing as far as I'm aware and that didn't work. It won't boot into the OS and just keeps refreshing to the Lenovo splash screen. Any help would be appreciated. it's a fairly old laptop but it's needed and we can't seem to get it to boot up again. 

Read other answers
RELEVANCY SCORE 65.6

Since I moved my pc to a LAN-party it takes dozens of time to get the computer starting without a boot loop.

When it starts my pc screen goes on standby after the windows loading screen while Safe-mode works perfect.

Could it be hardware related? because I might have been staticly charged at the LAN-party since I felt electricity everytime I touched the metal of the case.

EDIT

my thoughts: 2 problems.
1. Bad power connection leading to boot loops (the orange light next to the power light doesn't work with boot loops)
2. Videocard issue leading to black screens and BSOD (atihmpag.sys) --> reinstalled the video card and it seems to work for now.
 

A:Boot loop and black screen after windows logo

If it can load into Safe Mode usually this means a driver issue.

Second, you should in no way be feeling anything electric through your case! Is the motherboard touching the case at all? Check the back. The standoffs should prevent this. Is somthing touching the motherboard?
 

Read other 1 answers
RELEVANCY SCORE 65.6

Since I moved my pc to a LAN-party it takes dozens of time to get the computer starting without a boot loop.

When it starts my pc screen goes on standby after the windows loading screen while Safe-mode works perfect.

Could it be hardware related? because I might have been staticly charged at the LAN-party since I felt electricity everytime I touched the metal of the case.

A:Boot loop and black screen after windows logo

It could be hardware related, so we can run some tests. I'm wondering why safe mode works fine.

First off, are you really using XP, or are you using Vista/7?

The first thing I would do is open up the case and check your connections. Pull out the RAM and seat it firmly, make sure the hard drive power and SATA cables are in tight.

Any cable you see, make sure it's in securely.

Read other 5 answers
RELEVANCY SCORE 65.6

Hello everyone, I have an HP Pavilion g6 laptop.  It was restarting and booting fine until I upgraded to Windows 8.1.  When I restart the computer, it sometimes gets stuck in a boot loop in the HP logo screen.  Most of the time it doesn't do it, but it does get stuck from time to time in the HP logo screen.  It gets stuck mostly when restarting the computer.  If anyone has had the same problem and/or has a solution,  I would appreciate the help. Thank you

A:Windows 8.1 boot loop stuck on HP logo, mostly after restart...

Hi phillibob41, I understand that you are having a problem with the computer getting stuck in a loop when restarting. I will try my best to help you with this. To better guide you, could you please give me some more information. 1. What is the Model Number of your laptop? LINK: How Do I Find My Model Number or Product Number? 2. How are you getting out of the loop?Please let me know, and I will be happy to help. Thank you,




I worked on behalf of HP.

Read other 9 answers
RELEVANCY SCORE 64.8

Hello,
 
So two days ago, I turned off my computer. I got off from work and turned on my computer, and it started going into a bootloop, I tried booting in safe mode, and tried doing a Repair but the screen blacks out. So then I tried booting from a USB using Kaspersky Rescue disc, the screen blacks out after about 60 seconds or more. I've tried almost every rescue disc and nothing seems to work. I'm at a complete dead end. I've received help on here long ago for the almost same exact issue, so I have come here for aid.
 
 
Thanks,
 
-Brandon

A:Windows 7 64bit//Logo Splash Boot Loop//BSOD

Start with these free, bootable diagnostics:  http://www.carrona.org/initdiag.html
The BSOD seems suggestive of a hard drive problem - although that shouldn't cause the screen to go black.
The Kaspersky disk loads it's own operating system (not the Windows on your hard drive) - so that shouldn't affect it either.

Another suspicion is an overheating video card.
Can you see if the video card's cooler is clean and free of dirt/dust?  Is the fan for it working also?

Read other 7 answers
RELEVANCY SCORE 64.4

Hi, my first post up here  I've stuck with my friends Z710 laptop. He wanted the SSD drive inside, so we bought the adapter to connect extra hdd to a sata dvd drive slot.The problem is, when there are 2 hdd's connected the system doesn't boot, just the lenovo logo is flashing.Weird thing is, when I start with recovery button and choose "boot options" and manually click on SSD with the system, the system starts with both drives working properly. I'm already out of ideas, I was cloning the drive from HDD to SSD and backwards, trying switching slots, putting on UEFI -> Legacy, changing boot order. Nothing. Any help would be appreciated.Thanks,DZ

A:Z710 reboots on Lenovo start logo, 2 hdd's

I was also trying disabling the secure boot and going to legacy mode, but neither helped. In legacy mode laptop acts like there was nothing to boot from...

Read other 9 answers
RELEVANCY SCORE 64

So I am trying to change the boot logo on the said laptop, The New Graphic one with the weird design, just google Ugly lenovo logo. so I downloaded a basic logo and converted it to a 16 bit bmp images less than 20kb and i am using the lenovo supplied Pheonixtools SCT flash for windows program, The working folder has, the BIOS.cap file, the rsp file which defines the parameters for the flash,  and the 32 and 64 bit GUI and dos exe and another dosflash file. to this i added my logo file which is l.bmp... now when ever from cmd i run the command "Winflash64.exe /logo l.bmp" it automatically detects the Bios.cap file and the Image but the process always fails at "SecureFlash Verification Fail", going through the help page doesnt help as there is no parameter to skip the file verification except for skipping the Date and time check of the bios....  any halp please !!!

Read other answers
RELEVANCY SCORE 63.6

Hello I was requested by CKing123 to post a new topic. Its very possible I have a rootkit infection on my Desktop. I ran a Farbar scan earlier today. Scan results attached to this post.
 
Thanks
 

 
Alright, so something interesting in the FRST logs:
ATTENTION: ====> ZeroAccess. Use DeleteJunctionsIndirectory: C:\Windows\system64
This suggests a malware infection (Rootkit)
 
Please create a new topic in the Virus, Trojan, Spyware, and Malware Removal Logs forums and follow the posting instructions.
 
-CKing

 
 
 
Original Post: http://www.bleepingcomputer.com/forums/t/621554/windows-7-64bitlogo-splash-boot-loopbsod/?p=4052632
 
 

A:Windows 7 64bit//Logo Splash Boot Loop//BSOD "Rootkit Infection"?

Hello, Welcome to BleepingComputer.I'm nasdaq and will be helping you.If you can please print this topic it will make it easier for you to follow the instructions and complete all of the necessary steps in the order listed.===Press the windows key + r on your keyboard at the same time. This will open the RUN BOX.Type Notepad and and click the OK key.Please copy the entire contents of the code box below to the a new file. start
CreateRestorePoint:
EmptyTemp:
CloseProcesses:

HKLM-x32\...\Run: [vProt] => C:\Program Files (x86)\AVG SafeGuard toolbar\vprot.exe [2662472 2016-04-18] ()
HKU\OB\...\Run: [AdobeBridge] => [X]
HKU\OB\...\Run: [SCheck] => C:\Users\OB\AppData\Roaming\SCheck\SCheck.exe [51200 2015-10-26] ()
AppInit_DLLs: C:\PROGRA~2\SN_X64~1.BO~ => No File
S2 vToolbarUpdater19.4.0; C:\Program Files (x86)\Common Files\AVG Secure Search\vToolbarUpdater\19.4.0\ToolbarUpdater.exe [1888328 2016-04-18] (AVG Secure Search)
S2 1a34a8e0; "C:\Windows\system32\rundll32.exe" "c:\progra~2\SNSvc.dll",service
S2 AfterFLICS v3; C:\Program Files (x86)\AFLICS\AfterFLICS.exe [X]
S2 InstallerService; "C:\Program Files\TrueKey\Mcafee.TrueKey.InstallerService.exe" [X]
S2 tgsrvc_smartagent; %systemroot%\system32\z800mdfl.dll [X]
S3 easytether; system32\DRIVERS\easytthr.sys [X]
S3 IntcAzAudAddService; system32\drivers\RTKVHD64.sys [X]
S3 johci; system32\DRIVERS\johci.sys [X]
S3 RSUSBSTOR; System32\Drivers\RtsUStor.sys [X]
... Read more

Read other 5 answers
RELEVANCY SCORE 63.2

In order the remove viruses I restored my laptop to favtory settings. But when my laptop was trying to install windows again it was stuck at 10%. And after a while it said there was an error. And asked if I want to restart the laptop. So I did. But when it starts now it shows up the lenovo logo and then it goes black en then the logo shows up again. This keeps going. I can go in the bios setup by pressing 'F2'. Does anyone know how I can fix this? Help is needed. 

Read other answers
RELEVANCY SCORE 63.2

Can someone tell me how to change the Lenovo 720S-14IKB bios / boot logo?Tried to search for a guide, but I didn't find info on how to change the image on this particular laptop model.I want to replace the current image with my own custom image.Thx in advance for any help that will solve my challenge.

Read other answers
RELEVANCY SCORE 63.2

My ideapad Y 580 would not unsleep so I turned it off at the power button. When I turned it on again it boots to Lenovo logo then spinning dots then Lenovo logo with text Preparing automatic repair then spinning dots then black screen. It never gets to a Windows screen. I have gone into bios and changed uefi to legacy with no change in boot up. Also tried system recovery in bios which also went to black screen.  How can I get ideapad to boot up windows 10? 

Read other answers
RELEVANCY SCORE 63.2

Hello, Lenovo Ideapad stuck when booting at the Lenovo logo. No beeps. Not responding to F1, F2, F10, F12 or Del keys being tapped at boot.Power button and keyboard light up. Tried booting from USB using a bootable stick - didn't happen, boot still stops at the Lenovo logo. I'm familiar with laptops and their innards - have tried removing and reseating RAM (and using individual modules vs both) - still stuck at the logo when trying to boot. Removing both gives me a blank black screen at boot - no logo.Replaced RAM modules - this machine has two hard drives - both bootable; tried removing one, then the other. Still stuck at boot logo. Removed both, still stuck at boot logo. I've prodded at nearly all the contacts inside - all seem to be intact; the motherboard is definitely receiving power. Any suggestions would be appreciated !!!

A:Lenovo Ideapad Y510P stuck at logo screen at boot

Okay, I so also looked up whether the BIOS could be 'hard reset' - assuming there is a corruption in the config; and there isn't much help online. But if anyone knows how, please drop in a comment !Now, somehow, after reattaching all parts and discovering an old microSD card in the SD adapter - inside the laptop's slot - and then removing it, my laptop is booting again !Is this what could have caused it? I am not familiar with laptops (EFI or BIOS based) trying to boot from a memory slot. Or perhaps my prodding and putting it back together did something, Keeping this thread open in case anyone would like to weigh in on the points above!

Read other 1 answers
RELEVANCY SCORE 62.8

Can someone tell me how to change the Lenovo 720S-14IKB bios / boot logo?Tried to search for a guide, but I didn't find info on how to change the image on this particular laptop model.I want to replace the current image with my own custom image.Thx in advance for any help that will solve my challenge.

Read other answers
RELEVANCY SCORE 62

Dear all, I have Ideapad Z710 with a specifical problems. When I turn on laptop my cooler goes frantic 139 % rpm. After trying installing different OS (Windows 7, 8.1, 10) Fans never shuts down nor I can make him slowdown with some softwares, tried (notebook fan control, speedfan). I cannot see fan options except fan speed in any of those programs. Also I cannot install drivers for my second graphic card 740m as it states that graphic card isnt available at all. And yet I see it on board and it worked until these problems with fan came up. I have been looking for the solution all through the internet and forums tried many of the solutions but nothing worked for me. Can anyone help ?

Read other answers
RELEVANCY SCORE 61.6

My Z710 retuns the phrase "Please insert a disk into Drive D" when I insert a disk (full or unformatted). I have tried uninstalling/installing the drive to no effect. Is there a diagnostic procedure or software I can try before I go on the drive replacement route please?

A:Ideapad Z710. DVD not working

What are you doing prior to this message?Also does the Optical drive show in Device Manager and is it indicated as working?




T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory

Read other 1 answers
RELEVANCY SCORE 61.6

I have an Ideapad Z710 running under Windows 8.1.A few days ago the Laptop suddenly did not come up properly from sleeping mode. In the mean time I found out that I can get it started if I remove both the Li-ion battery and the coin cell battery (CR-2032) and install them again. But then if I switch the computer off (or put it in sleeping mode) it does not come up again.  And I have to apply the a. m. procedure again. Any idea what the root cause could be  ?

Read other answers
RELEVANCY SCORE 61.2

After several weeks of trying all possible tools and hacks, I've finally managed to marry the old black and white Lenovo logo with the latest CDCN54WW bios on one system. Details in the morning. Goodnight!

Read other answers
RELEVANCY SCORE 60.8

Hello,My Lenovo laptop is not starting.When I press the power button the Lenovo logo appears. After that there is an error message and the laptop prepares for automatic repair. But as the repair screen comes up nothing happens thereafter. The black screen remains. Even tried reinstalling windows but after selecting the usb drive for booting nothing happens. The same black screen remains. Does anyone knows the issue?

Read other answers
RELEVANCY SCORE 60.8

I was getting an error message on my ideapad saying a .dll was missing. this had no noticeable effect on the performance of the computer. However, I decided to restore my computer by using the "One Key Recovery". I opted to remove everything rather than try to save my files. Since doing so the machine is now stuck in a boot loop. First you see the Lenovo screen then a blue screen saying my computer ran into a problem, gathering data etc. and then back to the Lenovo screen. I have trued the One Touch Recovery again with no success. Though I have recovery media, the machine will not let me select boot from USB, I have tried putting the recovery media on a mini SD card but the system won't see that either. I have tried doing the system reset numerous times with exctly the same results. Does anyone out there have any ideas please? Thanks 

Read other answers
RELEVANCY SCORE 60.8

Hi to evreyone! So recently I bought a brand new Lenovo Z710 (i7-4700mq, intel hd 4600 and nvidia gt745m). I then installed windows 8.1 (genuine) and all the drivers on the cd that came with the machine. But it seems there is a big problem with the graphics card. Nvidia gt745 seems like its not there. The Geforce Experience and nvidia control panel fail to recognize it, although it's there on Windows Driver Manager.When I try to load a game (WOW) it crashes on the loading screen. "Display driver has stopped responding..." bubble appears and a minute or so afterwards, there is a bsod. The game works on the integrated card (intel hd 4600) when nvidia is disabled or its driver is uninstalled.I tried reinstalling the drivers, downloading and installing the recent ones, removing all graphic drivers and reintalling them in different order, tried safe mode, changed some bios settings, but still nothing happened.Could this be any kind of driver compatibility issue or simply a windows thing, or is it a hardware problem? Could the nvidia be faulty or the laptop itself? I want to try anything before turning it back to where I bought it for a look... So your ideas will be vastly appreciated. Thanks!

A:Lenovo IdeaPad Z710 GPU problem

http://www.nvidia.co.uk/content/DriverDownload-March2009/confirmation.php?url=/Windows/344.11/344.11...try this driver and see how you get on

Read other 9 answers
RELEVANCY SCORE 60.8

I can burn jpegs on a CD/DVD, but when I try to reinsert and view, nothing loads.  It's like the device doesn't recognize the file from the CD/DVD.  Any suggestions?  fyi, I upgraded the device from windows 8 to 10

Read other answers
RELEVANCY SCORE 60.8

Hi everybody, I have the plan to connect a 4k Monitor to my current Z710 Ideapad.As the laptop comes with the GeForce GT745M, which supports resolutions up to 3840x2160 I don't see any bottle neck here. For your reference: Specs of the GT745Mhttps://www.geforce.com/hardware/notebook-gpus/geforce-gt-745m/specifications But how about the HDMI socket? WIth what kind of HDMI Port comes the Z710? v1.0 or v1.4, v1,4a?That's very important to know and unfortantely I couldn't find anything about it in the manual of the Z710 Ideapad. Thanks in advance for your help, Kind regards,Michael

Read other answers
RELEVANCY SCORE 60.8

Hello guys and gals! I need assistance with disabling the led light on my camera. Searching I have found that some registry needs to be edited but unfortunately I can?t find any "LED" "CAMERA_MODE" or similar stuff inside the registry. This is the path where I found camera settings: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\  Anyone with more knowledge than me please assist so I can disable this annoying led.

Read other answers
RELEVANCY SCORE 60.8

I purchased my Z710 Laptop 2-3 years ago. Currently I seem to suffer from thermal throttling on both the CPU(i7-4700mq)(85C) and GPU(gt-745m)(75C). I tried cleaning dust from the fan and heatsink but that did not seem to solve the issue. I tried to underclock CPU down to 2.4GHz but still reaches 85C and GPU still throttles as well. So I am thinking of two options:1) Buy a laptop cooling pad and put it under the exposed underside of the laptop and hope that it can cool it down.2)Replace the thermal paste of the CPU and GPU (boy oh boy how sketchy this one is, but exciting at the same time!) and hope for the best? I am looking for your advice on which of these I should choose or if there is anything I am missing? Thank you in advance!  

Read other answers
RELEVANCY SCORE 60.8

My Lenovo ideapad Z710, after a year of use started telling me the battery was not the correct battery.  I thought the battery might have died.  I eventually bought a replacement battery.  The new battery gets the same message.  My wife has a different model but uses the same battery.  My OEM battery does not function in her machine but the new one does.  So it appears that my machine has a problem recognizing the proper battery.  Once I accept the message, the machine boots and runs fine plugged in.  The battery does not charge so I assume the machine is protecting itself from improper battery.  The new battery is a DR.BATTERY Notebook battery with a two year warranty.  When I was shopping for the battery, there were numerous suppliers and of course they all claimed to have only the highest quality that meets or exceeds the original battery specs. Does anyone know a solution?  Could it be a software problem?  I had assumed it was a hardware problem.  The computer works fine as desktop machine, but with no battery it is pretty worthless as a portable. 

Read other answers
RELEVANCY SCORE 60.8

Does anyone know how to update the BIOS on my computer i have a boot loop problem and I cant fix it.

Read other answers
RELEVANCY SCORE 60.8

Is Lenovo IdeaPad Z710 i7-4710 M.2 compatible?  I am considering to replace the WiFi card for an M.2 SSD card.  Now the question is my computer M.2 compatible.with those standard. If you know more about this subject let me know. Sincerely

Read other answers
RELEVANCY SCORE 60.8

I can burn jpegs on a CD/DVD, but when I try to reinsert and view, nothing loads.  It's like the device doesn't recognize the file from the CD/DVD.  Any suggestions?

Read other answers
RELEVANCY SCORE 60.8

Can this laptop be run from a 24V supply, too?Or is that voltage too high?(Two 12V batteries i series)

A:Power supply for IdeaPad Z710

The battery voltage and power supply voltage have nothing to do with each other. It has integrated voltage regulation modules that convert the voltage to the required voltages to power the device and simultaneously drive the battery. The voltage has to match with what the input is designed for, and that is 20V in the Z710. The amperage can basically be higher than required as the devices request an amperage and use how much they need (for the Z710 type 80AK, there were three power supplies: 20V on each, but with either 3.25, 4.5 or 6.75 Amps for 65, 90 or 130 Watts power output), but a differing voltage (unless your device is made for special fast charging types oder mostly USB Type-C, which most laptops aren't) will most likely fry your motherboard/batteries. By the way, the batteries in your Z710 run at either 14.4 or 14.8 Volts, not 12V.





Did I/anybody else help you? Give a Kudo!Did a post solve your problem? Set the post as solution!Lenovo Yoga 530-14ARR (81H9003VGE)

Read other 1 answers
RELEVANCY SCORE 60

Hello,I've been resetting my laptop, removing all my files and reinstalling windows, and when my PC gets to 64% of reinstalling windows, my laptop goes into an endless reboot loop. This is really bad, any help is appreciated.Thanks,Vid_Game_Dude6

A:Boot loop at 64% of windows installing after reset- lenovo ideapad 100s

HELP!

Read other 1 answers
RELEVANCY SCORE 60

Hi All! I have Lenovo IdeaPad Z710, old BIOS and Windows 10How can I upgrade it to a new one now?Lenovo Vantage does not find the update, the site has an update - Update BIOS for Windows 7 (32- and 64-bit versions), Windows 8 (32- and 64-bit versions), Windows 8.1 (64-bit) - Lenovo Z710 7FCN96WW can it be installed from under 10?

A:IdeaPad Z710 BIOS update from Windows 10

Yes, you can install version 96 from windows 10.  Download the update from your support page. Readme:https://download.lenovo.com/consumer/mobiles/7fcn96ww.txt I would not update the BIOS unless you find a change in the readme that is needed on your machine. 7FCN96WW Modified: 1. Correct Intel 3160-AC WLAN combo card SSID.7FCN95WW Modified: 1. Support Intel 3160-AC WLAN combo card. 2. Fix the S3 LED abnormal issue.

Read other 2 answers
RELEVANCY SCORE 60

Hi, I bought the Idepad Z710 model with 16 gb of ram (default) and the seller told me that the notebook has 4 memory slots ram and upgrade is possible up to 32gb. I install and run the CPU-Z program to collect hardware information and the program confirmed that the laptop has 4 slots. I opened the notebook but I identified only 2 slots for memory ram. I wonder if the laptop really has 4 memory slots ram and upgrade to 32GB is possible. Additional information: the CPU is the Intel I7 47700MQ. Thanks in advance!

A:Ideapad Z710 Memory Upgrade up to 32GB RAM

Your seller must be thinking that he is selling a desktop. Which do you trust, your seller, CPU-Z or your eyes? Refer to page 41 of the hardware maintenance manual there are only TWO slots available.

Read other 2 answers
RELEVANCY SCORE 60

Hi All Just recieved my new (rethink) z710.no matter what I try I can not get the wifi to connect to my virgin super hub 2. I can connect to next doors wifi but not the virgin hub. Any sugestions?Adapter is Broadcom 802.11n SteveN

Read other answers
RELEVANCY SCORE 60

Hi All! I have Lenovo IdeaPad Z710, old BIOS and Windows 10How can I upgrade it to a new one now?Lenovo Vantage does not find the update, the site has an update - Update BIOS for Windows 7 (32- and 64-bit versions), Windows 8 (32- and 64-bit versions), Windows 8.1 (64-bit) - Lenovo Z710 7FCN96WW can it be installed from under 10?

Read other answers
RELEVANCY SCORE 60

Last week I swapped out the HDD with a new Kingston SSD in my Ideapad Z710 and I ordered a HDD caddy.Everything ran fine with the SSD but after installing the caddy I keep running into a bootloop (Lenovo startup screen keeps splashing). The HDD is formatted so there are no boot partitions left on it and I have the boot priority set to the SSD. All changes I've tried making in the BIOS did not help. The only way to boot the computer is clicking the Onekey recovery button and booting through the Boot menu, which strangely only shows the SSD. Has anyone else encountered this problem and would be able to help?

A:Ideapad Z710 bootloop after installing HDD Caddy

I've the same problem. I try reinstalling SO, resetting bios and switching the ssd as 1st drive (I moved the SSD on the hdd bay, and the old HDD on the dvd caddy.) I did a clean install of Windows 10 on the SSD, keeping the old hdd only for data. (both the hdd have gpt partition, and I erase completely the old hdd). Nothing, the bootloop goes on as you describe. Anyone has the solution?

Read other 4 answers