Over 1 million tech questions and answers.

Having problem updating BIOS. I Can`t creat a BIOS recovery...

Q: Having problem updating BIOS. I Can`t creat a BIOS recovery...

Hello.I need to update BIOS on my notebooks.I used my second computer to creat a BIOS recovery drive on my USB.I used this way:Recovering the notebook BIOS using an external storage devicehttp://support.hp.com/us-en/document/c02693833 I download recommended version:sp62234.exeAfter step "5. In the Location to Save Files window, click Change."The HP System BIOS Update Utility DOSENT opens and i have 2 errors: 1.IHISI: Get support mode fail in SMI! 2. BIOS did not support InsydeFlash! Please help me.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Having problem updating BIOS. I Can`t creat a BIOS recovery...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 82

Product Name: Notebook 15Operating System: Microsoft Windows 8.1 (64-bit)Product Name: notebook 15Operating System: Microsoft Windows 8. 1Please help! My disabled no. Is 69730304

A:Power on recovery after updating bios

@Jacks95? Enter    76698920 Regards, DP-K

Read other 2 answers
RELEVANCY SCORE 79.2

I have downloaded the bois from the lenovo official site. But when I am updating its show the error message not for this notebook . I have lenovo g500s laptop .other people also facing same issue for the same laptop .please help ...Thanks in advance...











Solved!
Go to Solution.

A:Lenovo g500s bios updating problem. While updating...

Pan761,
 
The correct version of BIOS update has been just released - BIOS Update for Windows 8.1 (32-bit, 64-bit)
 
Now there should be no problems with it's  installation.
 
Regards,

Read other 1 answers
RELEVANCY SCORE 77.2

Hi. I have a dell inspiron laptop. My problem starts when i tried to update my bios from a07 to a15. While the update is running my laptop screen suddenly turned blank but my laptop is still on. What should i do?

A:Bios update fail. Blank screen while updating bios

Please check and see if you can get into BIOS. By the way list Dell model number and version of window. Ex: Dell Inspiron 3543, windows 10
1. Power off computer
2. Power on computer, quickly start tapping F2 key continuously. Hopefully, you'll be able to see BIOS screen.

Read other 1 answers
RELEVANCY SCORE 77.2

AMD Dual Core processors - updating BIOS?

how do you do this?

thanks a lot
 

A:AMD Dual Core processors - updating BIOS/flashing BIOS?

Flash a BIOS?
You need to download the update from the motherboard manufacturer. Then follow the directions in the readme file that usually comes with it.
 

Read other 3 answers
RELEVANCY SCORE 76.4

hi there, i am fixing a friends old computer and the hdd was stuffed so i got a new maxtor diamondmax 9 for it. although once installing it i found out that it would only run in udma2 mode (checked it in another computer and it ran at full udma6)
so i suspect that the current bios cannot support udma5 or 6, so i am looking for a bios upgrade for it.
the bios string is 6A69RPRDC-00, the number on the actual motherboard is 35-C960-00-05
thanks for any help, i am really hoping i can make this board work at udma5 at least and not have to settle for udma2.
thanks again
-Moltenz

ps. i just found this
AM-960
04/19/2001-i815-ITE87X2-6A69RPRDC-00 ITE87X2 + Winbond-W39A
at http://www.plasma-online.de/english/identify/serial/mainboard/mb_aristo.html
if that is any help.
 

A:help with updating bios. cannot find bios upgrade - 6A69RPRDC-00

WOW..............

Old Machines.....(just like me... but can still perform to the max lol)

I your Bios has the option of udma up to 6 then generally the bios supports the Mode! and your problem is that the HDD does not support the mode (cant remember if you said it does).

You are probably using wrong criteria for bios upgrade search.
Try WWW.driverguide,com

You Need the MB's Manufacturers Name or at least the MB Chipset and bios Manufacturers Name as well. go to the Computers muanufacturers website (you probably done that already) and search model.

otherwise Download a System info utility from Tech Spot, I use SiSoft Sandra or AIDA32.. (sandra might cause bluescreen on older machines).. Aida problably will have link direct to bios update site. hope this was of some help
 

Read other 9 answers
RELEVANCY SCORE 74.4

We ran into another problem. The motherboard will not recognize the new processor. We cannot update the drivers from a cd or thru windows itself because it will not even boot from anything. It will just go to the main bootup screen and give us a "unknown processor revision" message. We have tried booting to a dos startup floppy disk, but we'v had no luck.
 

A:problem with bios updating

sorry, forgot to include that the motherboard is a msi neo2 rx480
 

Read other 2 answers
RELEVANCY SCORE 74.4

I try to upgrade the motherboard BIOS (the model is the MSI GF615M-P33)

but when I go to flash and write me the command(mode with automatic update does not exist since the model is very old) it gives me the following message:

"Flash part is not supported"

How can I fix it ?

A:Problem updating BIOS

Welcome to our forum spinalgr1990.

Are you having a problem that you think updating bios will solve?

Are you trying to update the bios exactly as the motherboard instructs you to.

These are just some basic question that need to be answered no matter what motherboard you have.

What are the bios you have now?

Is this the exact message you receive?






Quote:
"Flash part is not supported"


When it comes to motherboard bios close is not good enough.

Read other 7 answers
RELEVANCY SCORE 74.4

Hello,i have download the last Bios update from the HP site. (sp48847.exe)Problem, when i run the file, it opens InsydeFlash but both "Current Bios" and "New Bios" version etc boxes are empty.So i didn't risk to click START.... i prefered to EXIT it instead.I am running is with administrator privileges.So how can i do? My actual version of the bios is F.30 while the new is F.66... for quicker info here is the link to my product : http://support.hp.com/us-en/drivers/selfservice/hp-pavilion-dv4-1100-entertainment-notebook-pc-serie...

A:Problem updating bios.

Hey @nammy22222, I understand you're having trouble updating the BIOS. Please check out this guide on how to do that HP Notebook PCs - Updating the BIOS as there may be a step you are missing. Cheers,TechSurge.

Read other 1 answers
RELEVANCY SCORE 74.4

http://support.asus.com/download.as...2N68-AM+PLUS&os=17>&hashedid=N9gfnjYUinlROPLf

Have downloaded lasts bios, have put it on a flash stick fat32, have renamed file to 1801, got into it fine, backed up current bios fine but when i go to install new one i get error erasing blocks. Not sure what to do now.
 

A:Problem updating BIOS

Read other 9 answers
RELEVANCY SCORE 74.4

Hello All,

I saw this tread which included some issues with AHCI and I have a few questions.

I recently upgraded my bios on my 965P-DS3 V3.3 motherboard from F10 to the newer F12 version. I went straight into settings and tweaked the Bios per a guide I found on hardocp forums.

I enable AHCI, and set some other SATA settings (my current drive was plugged into an orange socket). Rebooted, XP was sluggish to load and then blue screened. I then disabled AHCI and rebooted using optimized defaults. Only now I'm experiencing very loooooong load times on just about anything. Games, apps, the HDD light is on but it doesn't seem to be reading all the time. Things will eventually load but it's taking 10x as long as usual. So the HDD works, but something is definitely screwy.

So my question is due I revert back to F10 Bios, or do a windows repair or roll back to a restore point, or did I seriously screw up my HDD??? I think I know my course of action (roll back the bios), but I just wanted some more info before I take that risk and frustration of potentially screwing it up. So if anyone has a similar experience with the HDD and this board, plz let me know how you fixed it. Prior to the Bios Update things seemed to be working fine.

Thanks,
Jack
 

A:Problem after updating bios

I put this in your own thread. When you have a problem, please start your own thread. The reason is with one problem, it is difficult at best to follow what has/has not been done. With two problems in one thread, it is impossible.
 

Read other 2 answers
RELEVANCY SCORE 73.6

Hello everyone When I update the BIOS I get the error message (( mount the efi system partition fail )) .... what is the solution?
 
 
Moderator comment: Formatting fixed for readability.

Read other answers
RELEVANCY SCORE 73.6

I've downloaded the file from the Toshiba website, and now have P003Fv370.exe. Running that just comes up with "BIOS update is not supported OS, Unsupported OS or service pack is installed". I was under the impression it was OS independent? Please help, I need to update it to stop it crashing and blue-screening me every half an hour. I've already installed the value added package.

I have a Toshiba Tecra M5 PTM51E
Running Windows 7 Enterprise
Current installed BIOS is version 1.70

I also read somewhere about installing it with a USB, If someone could help with that I'd appreciate it. Thanks.

Message was edited by: Suppression
Just tried it again and it says "Could not create "C:\TOSHBIOS.UPD" folder!" I have no idea what's going on anymore.

A:Problem updating Tecra M5 BIOS

Hi

The P003Fv370.exe is a package.
Click right on this package and choose unzip here.
Now you should see other files inside this .exe package.

From my knowledge there should be a file which starts the BIOS update.

If it will not work, I guess you need the Toshiba original preinstalled system to update the BIOS.
At the other hand I don?t think that BSOD appears due to old BIOS version.
I guess update will not solve the problem.

Possibly the BSOD appears due to some critical software issue or hardware problems? so would be really interesting to know if the same happens using Toshiba preinstalled system

Read other 3 answers
RELEVANCY SCORE 73.6

HelloOn the process of updating my BIOS, after downloading "Flash UEFI BIOS update (Flash from operating system version)" and opening the readme file, i came across a dificulty that im not able to continue my process.(https://us.download.lenovo.com/pccbbs/thinkcentre_bios/fbj9ccusa.txt): readme fileSo, i did everything correctly untill the step 2 of the "Installing the Package" process, basically when a put the command ("cd C:\SWTOOLS\FLASH\FBJYxxUSA\")on the Prompt, appear a message saying: "iit not recognized as an internal or external command"I already changed the path on my Computer properties, but nothing seems to work outIf someone could lend a hand, i would aprecciate a lot. Thanks!Btw: im using windos 10https://gyazo.com/33367d1e74576f72ace4236867258266: sorry about being in portuguese, i really dont know how to make it in english, just in case someone wants to see what appearsEdit 1: my pc is a desktop M93p

Read other answers
RELEVANCY SCORE 73.6

1) Not charged in off mode.2) In the system the bluetooth disappeared.3) There is no possibility to downgrade the BIOS version.4) USB+OTG flash drive Work slowly.5) ... Can anyone fix this, or should I buy a new laptop?

Read other answers
RELEVANCY SCORE 72.8

I am in the process of updating my BIOS settings on my laptop (which I was prompted to do by Toshiba's hardware updating service).

I followed all of the instructions provided by the program as it extracted and ran the update. However, the computer began the process of restarting, but has been "logging off" windows (Vista Business) for about an hour now. I'm not sure how to stop the process without causing serious damage to my BIOS, but this doesn't seem normal.

Please help!

A:Problem updating BIOS- Protege A600

DO NOT UPGRADE TOSHIBA BIOS.

Lack of support and many bugs in their new BIOS.

Before you are making any upgrade try contacting Toshiba directly and see that it's impossible.

Last BIOS upgrade was really bad.

Hen

Read other 3 answers
RELEVANCY SCORE 72.8

Hi,
I have lenovo 3000 n100 0768HCQ laptop.I update my bios and after updating my system is not working well. When i press any key of keyboard ,all usb connected devices disconnects and after releasing key they get connected as they just have been plugged in.I tried with my old bios version to recover but it is not working . When flashing bios a blue screen appears and system restart.
What to do.. Please help me.......
 

Read other answers
RELEVANCY SCORE 72.8

Hello

SATELLITE PRO R50-C-11E PS562E
BIOS : 6,20
EC : 1,40
OS : WIDOWS 10 UEFI

Latest BIOS version for my laptop on http://www.toshiba.fr/support/drivers/
=> 09/05/2017 BIOS Update Toshiba OS independent 6.50-WIN World Wide
=> bios-20170428144129.zip => P009Ev650.exe

But when I run, user and administrator, P009Ev650.exe, I end up having a window with :

TOSHIBA BIOS Package ver. 4.4.6
This computer is not supported

Has anyone ever had this problem?
Is there a solution, or another way to update the bios on this laptop ?
For example by extracting the .exe, by dos or freedos, or other...

Thank's for your attention and possible solutions

TRAGAN

Read other answers
RELEVANCY SCORE 72.8

 The computer wont start.   After pressing "ON" one can hear a vibration sound, it turns on an orange LED.   Stays black for two  minutes; then screen does light to a dim night-blue color.     This is for a Split x2 13-g110dx (windows 10 64bit). Already tried:  hard reset and going to BIOS (Windows button + "B"). Also tried booting from  a USB drive.   It did not work (see screen below). Any suggestion(s) of how it can still be revived ("do it myself")? Thank you.                                       Screen message  

Read other answers
RELEVANCY SCORE 72.4

hiiam new to this so forgive me if i have posted in the wrong placei own an hp 250 g4 recently i updated my bios and after successful update i tried to enter bios and its asking for admin password but i never has set any admin passwordit says system disabled  [ |  87228416] i can normally boot into my os but cant enter the bios plz help me 

A:asking for bios password after updating bios

When prompted for password try 38180438

Read other 2 answers
RELEVANCY SCORE 72.4

i updated my bios and the fan is now very loud on it for some reason , im not sure why here's my belarc advisor list if anyone can help me get the fan back to normal that would be very helpful!

Windows XP Professional Service Pack 2 (build 2600) Packard Bell NEC SPIRIT 550
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.93 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache Board: Packard Bell NEC
Bus Clock: 133 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 07/15/2005
Drives Memory Modules c,d
80.02 Gigabytes Usable Hard Drive Capacity
63.95 Gigabytes Hard Drive Free Space

COMBO IDE5232CO [CD-ROM drive]
SCSIVAX DVD/CD-ROM SCSI CdRom Device

Apple iPod USB Device [Hard drive] -- drive 1
ST380011A [Hard drive] (80.02 GB) -- drive 0, rev 8.01, SMART Status: Healthy 480 Megabytes Installed Memory

Slot 'A0' has 512 MB
Slot 'A1' is Empty
Local Drive Volumes

c: (NTFS on drive 0) 80.02 GB 63.95 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
ashley 12/4/2005 4:57:52 PM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never
Marks a disabled account; Marks a locked account None detected
Controllers Display
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
SiS PCI IDE Controller None detected
Bus Adapters Multimedia
VAX... Read more

A:BIOS HELP!!!!!! fan very loud after updating bios

Read other 16 answers
RELEVANCY SCORE 72

My PC crashes frequently and the blue screen mentions to update BIOS as one way to prevent the crashes
I have recently upgraded my RAM from 512MB to 1512MB, also my graphics card from Geforce 6200 to a Geforce 8800 320MB, also from windows XP to Vista. The PC make is a siemens Scaleo P with 3.06Ghz and a Celeron D processor.
however when i tired to update my Bios i couldnt find the download. My motherboard is made by Gigabyte (GA-8S649 MF) the nearest is GA-8S648 and 650. when i search the motherboard number on google the results are rare and foreign making it difficult to understand.
Please help and all advice is welcome
cheers
 

A:Problem updating BIOS, can't find update from manufacturer

Hello and welcome to Techspot.

Have you tried the Fujitsu/Siemens website?

You will need to enter the serial number into the search options.

Regards Howard :wave: :wave:
 

Read other 2 answers
RELEVANCY SCORE 72

Hi everyone ! I have been Trying to contact support for the longest but for some reason, my SNID and S/N are never recognised... Anyways,I have a AXC-605-EB31 which at base was Windows 8, Intel Core i5 processor 4440, Intel HD Graphics, 1TB Hard Drive, DDR3 Memory. As i booted it for the first time, There was an update right away to Windows 8.1. After an update to Win8.1 a few monts after i got my computer, one of my games started to bug out, and i heard it might have been caused by the game itself being too old for the intel card which was too powerfull for it. In the end, i left the game and never went back to it.I think i did something at the time, but i can't rememeber. I might have tried to downgrade it at some point. As time went by, the Windows10 Update rolled by, so i signed in and got the update on Day 1. I must mention that i got multiple graphic card crashes happening from time to time. But i was expecting a Win10 Update to fix the problem. Later On, Minecraft, for some reason had problem loading textures and i still didn't know why. At the time, came to the Acer Website to try to get some support but couldn't get any (and i didn't know Community existed...) , so i went to Intel to try to fix the problem... to no avail. In the end, i decided to get myself a new graphics card (a Radeon HD 6450) to replace the current buggy one. It fixed the problem... but not the crashes. and here comes the problems i have lately:The Graphics Cards... Read more

A:Graphic problems/WinUpdate Problem/Updating BIOS -...

copy BIOS Win and Rom folders to c:\press windows logo key + xselect command prompt (admin)once on command prompttypecd\press entertypecd winpress entertypeflash.batpress enter it will start to flash BIOS

Read other 10 answers
RELEVANCY SCORE 71.6

I was configuring my bios when I accidently enabled legacy mode and secure boot, now my notebook will stay on a blank screen I have tried removing the memory, hard resetting it, entering the bios recovery menu, but failed to, my only hope is to flash the bios, the problem is that I can't find any bios files anywhere on the internet, not even the HP website

Read other answers
RELEVANCY SCORE 71.6

HP software said there was a bios update and it ran through this one screen said it recommended backing up the bios in case of corruption and it created a partition. Computer will now not boot and as its new I dont have a recovery disk. How is it that an automatic HP update can kill the computer. Anyone know if removing the partition will solve it or if /i have likely lost everything on the C drive. Any help appreciated thanks

Read other answers
RELEVANCY SCORE 70.4

Hello, i have a really annoying problem: Everytime i start my laptop, it wont boot up. The capslock button is blinking twice so i guess the bios is damaged. First i checked if there is a update for my bios on you driver/software download page but there isnt. So afterward i tried to recover and reinstall my bios but i cant even enter the bios update menu.In the bios recovery manual http://support.hp.com/us-en/document/c02693833 it says:With the computer off, press and hold the Windows logo key and the B key at the same time.Still pressing those keys, press and hold down the Power button on the computer for 1 to 2 seconds, and then release the Power button but continue to hold the Windows and B keys until the BIOS update screen is displayed or until you hear a beeping sound (usually 8 beeps).But this isnt working. It only blinks twice continiously but wont boot. Can anyone help me? I cant find further information regarding this issue. I start to get really really annoyed by the problem because sometimes it takes up to 15-20 times to get the laptop running. Best Regards  

Read other answers
RELEVANCY SCORE 68.8

So, I made the big mistake of wiping the HP:TOOLS partition on my hard drive, which I was wanting to use for something else. I now know that wiping the partition ended up wiping the BIOS as well. Now when I turn my computer on, the screen remains blank, except with a blinking dash in the upper left corner. I cannot boot into safe mode, but I can boot onto a disk or USB drive. I made a bootable USB drive with a linux system so I could access the hard drive and dump the my most important files onto an external drive. Now, I am trying to restore the BIOS. I downloaded the correct BIOS package for my computer (using another computer) and began following the instructions here. I first tried the whole using the windows and B key combo, but that didn't work. So I am trying to create a USB key with the BIOS recovery. The problem is that I haven't been able to successfully create it. Once I run the executable sp60655.exe, it takes me through the Install Shield Wizard and End User License Agreement dialogue boxes, but then it proceeds to extract the files without asking me where I would like to save the files, and it never gives me the option to install the bios files on the USB drive. Instead, it pops up with a couple of errors: "IHISI: Get support mode fail SMI" and "BIOS did not support Insyde Flash." Can anyone help me out with this? Thanks! 

Read other answers
RELEVANCY SCORE 68.8

Hi all,I am having a problem with this computer not wanting to boot at all, not even bios post or HP logo will show on screen.Computer was upgrade to win 10 from win 7 and video graphics were very unstable making it almost useless so finally got win 10 to revert back to win 7 and this seemed to be fully successful after the final reboot into win 7.Documents, programs and all seemed to be ok .Windows 7 showed 17 important updates available and wanted to reboot so we let it.It seemed to install 9 of the updates and then locked up, waited for 24 hours and still stuck with black screen, no errors and still powered on.So forced a shutdown by holding power button and after a minute turned back on with power button.Now all fans turn on but computer never enters bios to start up ,Nothing on screen, keyboard and mouse not seen , no beep sounds.Seems like cmos bios is not working at all.Tried taking out cmos Battery, Cannot find how to clear cmos to defaults that matches this Motherboard. MB is H-Joshua-H61-uATX (Joshua).Jumpers show 6 pins in this MB on Hp web site and mine has 7 with one blank and no numbers near pins.I tried several positions for the jumper and each time this has failed to recover or reset the cmos.Not sure what to try from here?????Can anyone help?Added info,I do not see how changing OS and going back could affect the cmos bios on this machine, but definitely this seems to be a cmos motherboard problem as on power up all fans start but none of the attached devices,... Read more

A:Possible bios recovery problem?

Hi, How do you know that the other devices are not being recognized?  Upgrading from one OS to another will not change the CMOS settings but removing the CMOS battery will in some cases.  Check the voltage of the CMOS battery. If it's not 3.3 volts then replace it.

Read other 9 answers
RELEVANCY SCORE 68.4

i have set my bios administrator password from long time and iforget it and now i tried to update my bios and there is no change i need some help     my device is : dell inspiron 5520 and the problem with administrator bios password

A:i have set my bios administrator password from long time and iforget it and now i tried to update my bios and there is no change i need some help my device is : dell inspiron 5520 and the problem with administrator bios password

You need to place a voice call to Dell support --- they'll provide you an unlock key upon validation of ownership.

Read other 1 answers
RELEVANCY SCORE 68

I have a Folio 13 that the hard drive has crashed and need to make a recovery BIOS on USB.  I've followed the instructions on software and drivers on HP support website, downloaded the BIOS file on to an acer laptop.  I've accepted the terms etc however when the file is running the InsydeFlash program prevents the file from running as part of the initialisation it compares the BIOS with that of the acer laptop, not compatible, the end.How can I get around this PLEASE? 

Read other answers
RELEVANCY SCORE 66

Hello to the BleepingComputer community,First of all I'm sorry I haven't finished some of the steps from the Preparation Guide. It's because these steps require a reboot (e.g. Step 6: Disable your CD Emulation Software - DeFogger will ask me to reboot the machine), and I have a bad feeling about the question if it is safe to reboot in my situation: I'm not sure if I have a type of malware which is ready to infect the BIOS - if it is so, then it could infect it much easier during the reboot process.- If there is a good way to find out what is the problem (and fix the BIOS threat part if it really is present) without rebooting / shutting down this PC, or at least without booting from this hard drive (which I feel is probably infected), then please tell me what should I do.- If you know a place / forum where I can get a specialized help for this (seemingly BIOS-malware related) situation, please tell me where I could go.- If there is no way to move forward, I'll go ahead and risk the reboot, and follow the other steps (steps 6 to 10) in the Preparation Guide, no problem.I kindly ask you to please read below the details of the problem as it occured to me, and the things I have tried so far.The PC is AMD Athlon 64 X2 Dual Core BE-2350 2.1GHz, Motherboard Biostar TA690G AM2 (with AWARD BIOS), 4GB RAM, 200GB SATA HDD, and an ASUS EAH4870 card added a few years ago.It's with WinXP SP3, AVG Free 2012, (standard) Windows Firewall, and it's behind a router.I ... Read more

A:BIOS virus/rootkit? - Unknown threat by AVG - "Bios Update\Award" folders, BS_Flash.sys, BIOS.sys and a dozen of m...

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. Click the Watch This Topic button at the top on the right.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 19 answers
RELEVANCY SCORE 66

Hi, I have a brand new Win7 64bit build with a clean install from an Upgrade CD and noticed in BIOS that my 1st boot device must be "Windows Boot Manager" or it asks for the CD.

I only have 1 storage device (SSD) in the system and when I look under Disk Management in windows, it shows a 100MB "EFI System Partition" in addition to the primary partition (which is labeled "Boot, Crash Dump, and Primary Partition" - so it seems to have the boot files on it).

My components are:
Intel i5 3570K
Gigabyte Z77-DS3H mainboard
16GB Crucial Ballistix
Intel 520 180GB SSD
LG BD optical drive
GTX 560ti

As I only have the one non-optical storage device I did not set any partition parameters at install. I Attempted to do a Startup Repair with the windows disc to maybe try and delete the EFI partition and got the "... System Recovery Options is incompatible with the version you are trying to repair" error. Not sure what that is.

If Disk Management shows a healthy partition with "Boot" listed as being contained, why can I not select the SSD as boot device #1? I can boot perfectly fine with the Windows Boot Manager listed as boot device #1 and the SSD as #2, however it's not ideal.

Thanks

A:Boot Issue BIOS-WindowsBootManager-System Recovery problem

I would reinstall to an MBR disk after removing EFI Boot Disk from BIOS Boot order.

Set DVD drive first to boot, boot into DVD Command Line to run Diskpart Clean Command followed by the command "Convert MBR" and "Exit".

Then install Win7 following these same steps for Clean Reinstall - Factory OEM Windows 7

This will avoid problem with having a GPT formatted disk installed with EFI boot which is not needed except in the rarest cases.

Read other 9 answers
RELEVANCY SCORE 64.8

I have a Sony Vaio VPCEH25EN and while partitioning I lost somehow have lost the automatic recovery faciltiy that used to recover the whole system from the recovery files stored in a hidden drive.

Now I have copied the contents of the recovery drive using linux but am not able to create a bootable recovery disc with that so that I can recover to the original factory settings as I having a problem with many drivers if I install the same OS separately.

So is there any way that I can create a bootable recovery media for my system from that contents of the recovery drive, just copying in a pendrive or DVD isnt serving the purpose.

A:How to creat bootable recovery disc with the contents of recovery drive

Hi and welcome to TSF you should have made recovery disc when you first got your machine there should be software on it to allow you to make the discs all the manuals drivers etc should be here Support for VPCEH25EN : E Series : VAIO? Laptop & Computer : Sony India

Read other 4 answers
RELEVANCY SCORE 64.4

Hello dear hp wizards! I have a weird problem. When I'm attempting to install the newest BIOS update thru HP Support Assistant, the installation program asks me for my BIOS password which doesn't work for some reason, but it works fine at startup when I access BIOS setup / update BIOS after I have to give the password there, it even gives me the happy "bleep bleep bleep bleep"- sound. I've never had this problem before.  Any ideas? kody

Read other answers
RELEVANCY SCORE 64.4

Made the huge mistake of updating BIOS. Had small MOBO usb prob, and for some reason thought a BIOS update would do something. Wasn't too worried because Gigabyte touts Dual BIOS pretty strong.

Anyway, tried updating BIOS, then system would not boot, so the Backup BIOS didn't kick in. btw, the MOBO is a Gigabyte GA-K8N Pro.

So I copied the backup bios to a floppy and used the floppy to fix the main bios. OK, now computer would boot, but would freeze up after the desktop icons appear. Actually would sometimes work for a few minutes, but always froze up.

Boots OK to safe mode, even to the point of getting online, so I downloaded the old bios from Gigabyte, put them on floppy and used that to update the main bios. Same result.

Also did a system restore from XP Pro Safe Mode (because XP wrongly states that this can be undone; didn't find out that System Restore done from safe mode cannot be undone until I tried to undo!).

My tech support (ABS Computer; they rule) thinks that the BIOS is now fine, that some windows files are corrupt and a re-install will fix problem and mobo is probably fine as well. I'll buy that.

anyone have any miracle suggestions before i re-install? Is a repair install worth a shot? Really not looking forward to re-installing all my software and putting all my data back where it belongs to get my email hist., bookmarks, etc. back.

thanks - I will now write the following 500 times: LEAVE THE BIOS ALONE! even with Dual BIOS
 

Read other answers
RELEVANCY SCORE 64.4

Hi
I am running a home-constructed PC (started out life as a Dell, but i had to replace the motherboard and - well, one thing led to another).

Asus A8N-E running NVidia nForce4 with AMD processor
Windows XP professional
Zone Alarm security suite

It's been working fine for a couple of years with the odd hiccup but i transferred to Zone Alarm from McAfee about four months ago, and upgraded to IE7 - security and fire walls seem to be a big part of the problems i've had in the past so i thought i'd mention it.

last week i had the "application error with winlogon.exe" error on log on and I couldn't boot at all. I did a repair install from the XP disk which *Mostly* worked, but now I have no mouse. I am having to tab through the browswer fields to even post this message which is incredibly frustrating!

Odd symptoms:
* IE has rolled back to version 6 (I guess that might be a function of the repair install)
* In the device manager there is NO "mouse and other pointing devices" entry, let alone any mouse recorded under it
* In the control panel, the mouse hardware properties are completely blank (no way of updating driver or getting more inform,ation - selecting the buttons does nothing)
* In Regedit the particular registry key that Microsoft says I should be looking for (at http://support.microsoft.com/kb/142405) which is HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Class/Mouse doesn't even exist in the registr... Read more

A:Mouse Not Detected, bios problem? Can't even get INTO bios on boot

Most likely a bad mouse, or a bent mouse pin, or you are using one of those wireless mouse units, or a cheap usb mouse.

Mouse detection problems are exceedingly rare except for the above... never heard of a mouse being affected by a virus.

Uninstall Zone Alarm if you are using Internet Explorer 7.0 because you will always have problems otherwise.
 

Read other 3 answers
RELEVANCY SCORE 64.4

Okay, so I got the laptop from my aunt and she gave it to me broken, not booting up. So I wanna upgrade/downgrade the BIOS and probably will help with the issue. It booted yesterday, but it didn't today. I followed the instructions in this document at Recovering the notebook BIOS using an external device. I currently have a blank non-bootable USB, and whenever I extract the BIOS there, I get "Error IHIS! not support current BIOS" followed with "BIOS did not support InsydeFlash"  May anyone please help me to finally fix this devil. Any help would be appreciated.    And yes, It is on Windows 10 Pro 32 bit. I did a fresh clean install of it yesterday.

Read other answers
RELEVANCY SCORE 63.6

I've been trying to update my BIOS as I realised how old the driver is, but I useless, as they tell me to download programs that cost and I just cannot be bothered to go through all that.

Could anyone give me a link to where I can just download an update please?

A:Updating my BIOS

Try here, this is the driver page for your computer model number listed in your specs. Notice the OS says Vista but if its a BIOS update the only relevance of the OS is weather the flash utility will run in Windows 7. All the other drivers listed are for Vista. This could be the correct BIOS for your machine but a second opinion would be most welcome to confirm.

P.S Run at your own risk as we all know the risks of incorrect BIOS updates. Check the motherboard show to be P5LP-LE before flashing.

Read other 2 answers
RELEVANCY SCORE 63.6

Im upgradeing my asus mobo p5b to the newest bios which is P5B-0701

now how do i install it some one told me about the utlities im on xp pro sp2 please help me thanks i need to upgrade it soon
 

A:HELP updating bios

Bump.......
 

Read other 3 answers
RELEVANCY SCORE 63.6

Wanted to know if i did a BIOS update can it be easily reversed in case of a failure. Some say by re-flashing the old BIOS back in, some say you need to remove the battery inside case and put it back in while pushing the power button and some say way in BIOS to set it back to default BIOS.

I know it is not important to update a BIOS if there is no major changes to a new one or if you are experiencing hardware compatibility problems because it can brick the MB. I thought it may add some features i do not have for RAM and UEFI.

Although i did it about 4-5 months after purchasing this system and it worked fine. When i go back now and look at the manufacturer's site under my model number PC it lists all .CAP BIOS 's, except for one i have now and below that one on list are .ROM. My version BIOS is 4101

My system uses a .ROM BIOS and it is told to you on the site from list of the systems BIOS's , not to use .CAP if have a .ROM one.
What is weird when i go to the Motherboard on same site instead of the system model, version numbers of each BIOS do not correspond to the version numbers of the system model, but the MB BIOS's are all .ROM ones.

I posted both links plus when i purchased the PC it was with Windows 7 64bit Home Premium, i upgraded to Windows 8.1 Pro 64bit.
Why i am looking at the Windows 7 64bit chose on each link, actually same on Win8.1 .
First link is System, second is the MB. Any advice or ideas be much appreciated. Oh, ASUS wasn't that sure or helpful once be... Read more

A:BIOS Updating

The windows 8 BIOS file is the last one you could use. the .CAP is for mother board that came with Window 8 installed. You stated yours came with Windows 7 so as the Win 8 BIOS driver say's is only for Mother Board that came with windows 8.
So that solves you problem. It would be foolish of you to update your BIOS unless you know there is a updated feature that you need. Otherwise it is hazardous to your computer. Is you do be sure to extract the downloaded BIOS directly to a Fat 32 USB Stick. Then use the Ezflash in the BIOS. Doing it this way is almost 100% success, Winflash is less that 50% and lots of bricked notebooks. Not all the sure on Mother Board but seem like in the old days you could pull the BIOS Battery and that would set the BIOS back to original version.

Read other 19 answers
RELEVANCY SCORE 63.6

I just got a 250Gb Western Digital Hard Drive and it is read by the computer but it won't let me access it. I was told that updating the BIOS might help, but i am not sure how to accomplish this. If you have any other idea on what might help or how to update the BIOS plese let me know. Thanks in advance for any help given
Stephen
 

A:updating BIOS

Read other 15 answers
RELEVANCY SCORE 63.6

I bought a Yamaha CDRW and my system won't recognize it. It was suggested that I upgrade my BIOS to fix this problem. I have an Asus P2B Motherboard and when I downloaded the update, all I got was a Fax Viewer Document, not what I expected. Do I really need to update the BIOS? I am using Win 98 SE.

I have checked all the IDE cables and all configurations.......do I have a paperweight?
Any help would be great!

Rattzo
 

A:Updating BIOS

Depends on how old your bios are. If it's the last chance

Anyway here is link to your motherboard page
http://www.asus.com.tw/Products/Motherboard/Pentiumpro/P2b/index.html

You can just click on the link for the bios and get the upgrade, whichever you want, with or without hardware monitoring.

Have you tried the burner in another machine just ot see if the burner is good.
Differnet cable
Different power connector
Different master slave settings on ide's
 

Read other 1 answers
RELEVANCY SCORE 63.6

Hey all,

I have the MSI K7N2 Delta mobo, which is supposed to have a 400FSB, but when I set it up in the BIOS, it will only go to 200. I saw an update on MSI for that board, which I think may fix that problem, so I downloaded it to my desktop. How do I go about applying the update? I didn't want to just double click the file and see what it does, instead, I decided I should ask the experts here at TSG first.

Thanks,

PaveFE
 

A:Updating my BIOS....how do I

Read other 12 answers
RELEVANCY SCORE 63.6

Basically I want to flash my Bios, but the thing is... I am not sure which I have to choose! is it all of them? do I choose the latest one? I am lost.

Bios updates: http://www.gigabyte.com/products/product-page.aspx?pid=3863#bios
Motherboard: GA-Z68A-D3-B3 http://www.gigabyte.com/products/product-page.aspx?pid=3863#ov

your help is really appreciated.

(p.s. if I am correct, my current version is F3. Not even listed!)
 

A:Updating BIOS

You only choose one and that is usually the latest one.

That said, are you having a problem that you hope the BIOS update will fix? If not, see the warning:

"Warning:
Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction."
 

Read other 4 answers
RELEVANCY SCORE 63.6

I have a Pavillion A6200NI am using Windows 7I would like to update my Bios (Phoenix Technologies LTD 5.20 10/3/2007) but not sure how.I checked HP and one is not offered.Any ideas on how I go about finding and updating my Bios?MotherboardMCP61PM-HM (Nettle2)Manufacturer: ECS

A:Updating Bios

Hello fredb38, I managed to locate a BIOS update for the motherboard you listed. You might take a look at the information in the link below and see if it is what you require. MCP61PM-HM Motherboard BIOS Update    BIOS Link Here   is a link for the drivers and software for your system. Hope this helps.

Read other 9 answers
RELEVANCY SCORE 63.6

i just got a new ram for my pc. and the ram speed 2400MHz but my pc default 1333 MHz so i tried to chang the clock timing and the voltage of the ram but my BIOS is so old it didnt alow me to do that. is there any other way i can get to change my ram speed that i paid for.

A:updating Bios

kerlos28 You can NOT clock the RAM at speeds your processor will not support, and without specific model information of your PC, I can not see what speeds it will allow. So please follow these instructions:  Finding Your HP Product Model Number | HP® Customer Support We can proceed once you provide the information.Thanks

Read other 1 answers