Over 1 million tech questions and answers.

acer v3-571 boot fail

Q: acer v3-571 boot fail

About a year and a half ago i bought a acer V3-571. for the last 4 months, every once and a while, it decides not not turn on. this is what happens:
When i press the power button the power button light was well as the power indicator lights turns on for only about 5 to 10 secconds then it turns off.
The screen does not turn on, it just stays black.
eventually, after pressing the button for a couple of days it decides to turn on.
some times this problem lasts only a day but sometimes it last a couple of weeks.
i have tried all of the typical things: press the button down for X amount of time, or strip the pc first then press the button. none of these work reliably.
i just want to know what is happening and how i can prevent it from ever happening again?

RELEVANCY SCORE 200
Preferred Solution: acer v3-571 boot fail

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: acer v3-571 boot fail

is it plugged into the charger when trying to do it? if so culd b bad charger/bad battery

Read other 3 answers
RELEVANCY SCORE 63.2

Hi guys,

I was reading How to get Acer laptop to boot from CD? and seemed to be making progress, but unfortunately the discussion fell flat and my problem persists.

I recently purchased an Acer Aspire V5 Touch which came pre-installed with Windows 8 Single Language. Unfortunately I need this Laptop to run Windows 7 Professional for work. In the past I have played around with Duel booting on my Desktop, however this Acer is proving to be quite a challenge. Thus far I have managed to create a new Volume using the disk management application in Windows 8. I have also managed to set the first boot device in the (F2) bios to the CD/DVD rom by configuring it in the Boot tab as first boot device. Now in theory the Laptop should boot from the Disk while restarting, which doesn't happen.

I have also spammed F12 trying to access the boot menu, to no avail. Every-time the the laptop just boots straight into the log screen.

The ideal would be where I would have Windows 8 and Windows 7 duel boot when booting the laptop.

Please assist

A:duel boot on Acer fail

ok update: I have set the boot option to legacy boot which made the laptop boot from CD. The Win7 installer loaded fine. I then when into the drive options, deleted the partition I made and then chose create partition like I always did with fresh install. After I did that I got a message that read: Can not install windows on this disk. The selected disk is of the GPT.

I have no idea what is wrong, and if I am going about this in the wrong way. Any assist would be greatly appreciated.

Read other 9 answers
RELEVANCY SCORE 52

Friend of mine gave me her Acer Aspire 5742z-4813 because it fails to boot and eventually asks to repair, which it doesn't. Can't enter safe-mode, either.

Only thing she's said is that her daughter installed Norton 360 a few days before it crashed.

Things I've tried:

At command prompt, ran the following with no effect: bootrec.exe /FixMbr, bootrec.exe /FixBoot, bootrec.exe /RebuildBcd, chkdsk /f E:, and finally chkskd /f /r /x.

I also entered BIOS and changed HDD mode to IDE from ACHI. No joy.

Thanks in advance, guys.

A:[SOLVED] Win7 Fail to Boot, Fail to Repair

Test the HDD, download the ISO image for Seatools in my signature, burn the image to CD using IMGBurn also in my signature, boot off of the newly created CD and run the Short and Long tests on the drive. If either test fails, the HDD needs to be replaced.

Read other 5 answers
RELEVANCY SCORE 48.8

Last week my Acer ATC-115 would not power up. Tried all the work arounds I could think of, different outlet, different power cord, and nothing helped. I contacted support, was given a service order number and drove 2 hours (one way) to drop my computer off at the Acer depot. The computer was shipped back to me within three days (very fast) with the following "Diagnosis": Unit power on /post/video/boot w/o any issue. Installed factory default OS sucessfully and unit tested good. So I set about connecting all the cables and tried starting the computer, it powered up, great, they fixed something. Now I understand, and was warned by Acer, that if there is a hard drive issue Acer may have to format the hard drive (HDD), what I don't understand is what  the possible hard drive issue was that they felt the need to format my HDD?The diagnosis does say the unit powered on "w/o any issue", if that's the case why did they have to go further and format my HDD? Oh well, not a big deal, I keep excellent backups but it's still seems a big waste of my time. Fast forward three days and again my computer would not power up! Tried changing outlets and power cords to known working ones but the result is the same ... unit still would not power up! I put back the original cord, plugged it into the original outlet and just fiddled with the Power button, pressing it repeatedly, and after about 10 mins the unit powered up! What is unknown to me is why the Power butt... Read more

Read other answers
RELEVANCY SCORE 48.8

Last week my Acer ATC-115 would not power up. Tried all the work arounds I could think of, different outlet, different power cord, and nothing helped. I contacted support, was given a service order number and drove 2 hours (one way) to drop my computer off at the Acer depot. The computer was shipped back to me within three days (very fast) with the following "Diagnosis": Unit power on /post/video/boot w/o any issue. Installed factory default OS sucessfully and unit tested good. So I set about connecting all the cables and tried starting the computer, it powered up, great, they fixed something. Now I understand, and was warned by Acer, that if there is a hard drive issue Acer may have to format the hard drive (HDD), what I don't understand is what  the possible hard drive issue was that they felt the need to format my HDD?The diagnosis does say the unit powered on "w/o any issue", if that's the case why did they have to go further and format my HDD? Oh well, not a big deal, I keep excellent backups but it's still seems a big waste of my time. Fast forward three days and again my computer would not power up! Tried changing outlets and power cords to known working ones but the result is the same ... unit still would not power up! I put back the original cord, plugged it into the original outlet and just fiddled with the Power button, pressing it repeatedly, and after about 10 mins the unit powered up! What is unknown to me is why the Power butt... Read more

A:Acer repair fail

Very sorry to hear you are having problems with your Acer product and we would like to help you. If you could send private message with the serial number of the system, we will see what we can do for you.

Read other 2 answers
RELEVANCY SCORE 48.4

Bought three new Acer Veriton desktops - None will deploy any Windows updates - just hanging on the "searching for updates screen. They arrived patched up to August - so do already have the "two standard fixes" for this. We have been advised to factory reset one - has anyone any other solutions.?

Read other answers
RELEVANCY SCORE 48.4

Acer Aspire 2920Z /MS2229 series can't boot up windows

Is this model prone to overheating, that can cause hardware problems?

What are the components of the laptop that i should check?


Any user-friendly recovery tools/software that you guys can recommend?

Need to retrieve the data inside.
 

A:Acer Laptop fail to reboot

Remove the battery, AC adapter and hold the power on button down for 30 seconds. Plug in the AC adapter and try to boot. If this fails, reseat the memory and the hard drive... Last, remove the hard drive and see if the laptop will post with out the drive. If all this fails, the motherboard might be bad. You can remove the hard drive and install it into a USB external enclosure to retrieve the important data using a desktop computer
 

Read other 1 answers
RELEVANCY SCORE 48

Hello..Someone Pliss Help To Resolve This Problem..I Want To Install Acer eRecovery Management On My Windows 7 professional Netbook but It Fail..It Say:eRecovery Can Not Be Installed 1. Bootable Files.I Install Clean Copy Of Windows TO My New HDD.. My SystemOS:WINDOWS 7 PROFESSIONALMODEL:ASPIRE ONE D270RAM:1 GBUnknOWN:AOD270-263kkModel No.:ZE7 Pliss I Need This To Recovery My PC If My HDD Fail.











Solved!
Go to Solution.

A:Acer eRecovery Management Fail To Install

Hi,Check this link which provides you a better insight, http://www.sevenforums.com/tutorials/668-system-recovery-options.html.Creating the system image will be the best option for you,. You may need a Flash drive or a External HDD for saving the image, just in case of HDD crash,.

Read other 4 answers
RELEVANCY SCORE 48

Hello..Someone Pliss Help To Resolve This Problem..I Want To Install Acer eRecovery Management On My Windows 7 professional Netbook but It Fail..It Say:eRecovery Can Not Be Installed 1. Bootable Files.I Install Clean Copy Of Windows TO My New HDD.. My SystemOS:WINDOWS 7 PROFESSIONALMODEL:ASPIRE ONE D270RAM:1 GBUnknOWN:AOD270-263kkModel No.:ZE7 Pliss I Need This To Recovery My PC If My HDD Fail.










Solved!
Go to Solution.

A:Acer eRecovery Management Fail To Install

Hi,Check this link which provides you a better insight, http://www.sevenforums.com/tutorials/668-system-recovery-options.html.Creating the system image will be the best option for you,. You may need a Flash drive or a External HDD for saving the image, just in case of HDD crash,.

Read other 4 answers
RELEVANCY SCORE 48

Hi, I've been having some issues with my Acer Aspire 5739 (Windows 7 Home Premium 64 bit) laptop with BSODs and malware, and eventually gave up and decided to just do a factory reset with alt f10 at the Acer splash screen. After it completed what I think is reformatting the drive, it starts up and gets to the screen where it says its setting up the computer for first use, and I get this error message:

"The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click OK to restart the computer and restart the installation".

When I hit OK it restarts the computer and the same thing continues to happen. I tried performing the reset again but it didn't help. After searching for threads with similar problems, my first thought was to try a clean install after 0ing the drive, however one of the issues I had originally is that the CD drive suddenly stopped recognizing disks a few days ago. To make matters worse, the numbers on my Windows COA sticker are all rubbed off (laptop is ~15 months old, purchased from Newegg so no Windows CDs). At this point is there anything I can do short of buying a new CD drive and a new Win 7?

A:Acer Laptop Factory Reset Fail

  
Quote: Originally Posted by mitsumonky


Hi,
To make matters worse, the numbers on my Windows COA sticker are all rubbed off


As you have been using your Notebook on your lap without a Cooler, which has caused overheating, you now have damaged parts which will need replacing.

Read other 2 answers
RELEVANCY SCORE 47.6

My Acer V7-582PG(windows 7 pro) fail to recognize the hard disk from the BIOS. I tried the orginal WD500G SATA or Crucial 480G SATA SDD, however none of them works. They work on other Windows machine. Do I have a hardware problem in the mother board? any one please help!!!

Read other answers
RELEVANCY SCORE 47.6

Hello I have an Acer AIO PC i decided to update the bios so i tried to upadate it but it was stuck on erasing bios for like 4 hours so i decided to close it i did and it did not reset i did not know what to do i kinda knew the bios was corrupted i was sreaching on the interent to see if you can check if your bios is corrupted could not find anything so i just left the computer on for a few days and it was working fine did not turn it off, but i had a windows update and thats when it reseted and now its just a black screen the hard and every else comes on and works fine but nothing shows up.

Read other answers
RELEVANCY SCORE 47.6

Hello I have an Acer AIO PC i decided to update the bios so i tried to upadate it but it was stuck on erasing bios for like 4 hours so i decided to close it i did and it did not reset i did not know what to do i kinda knew the bios was corrupted i was sreaching on the interent to see if you can check if your bios is corrupted could not find anything so i just left the computer on for a few days and it was working fine did not turn it off, but i had a windows update and thats when it reseted and now its just a black screen the hard and every else comes on and works fine but nothing shows up.

Read other answers
RELEVANCY SCORE 47.6

I discovered was that there is a requirement for a disk space area for recovery partition and operating system partition. The total amount the drive has available is 30GB. When I left the default size I noticed that there was no disk space available. I then rectified this issue by making recovery partition and operating system disk partition 15GB each and there was no error performing the install. It was able to install the last disk language disks and then prompted the second phase would initiate after the restart.What happens is the recovery dialogue appears and the copying interface starts at this point the error exception is thrown.I am installing windows 8/8.1 if I select 8.1 in the drop down for OS's there is a default of 12GB for the recovery partition and the operating system has a default of 50%. I change the operating system to 100% which is 15GB and then change the recovery partition to 15GB. This step ensures that there is enough hard disk space to be able to install all the CDs without disk space error. then when I finish the second phase after bootup appears:error: "Fail to apply image, error code is: -1" With the recovery disks that I ordered is a guide that states I must for 8.1 change the drive from 13GB to 30GB that is the recovery partition because below that is a formula that calculates % of disk space allocated to the operating system which is default 50%. It is really confusing because if I change the recovery partition to 30GB there is no disk spac... Read more

Read other answers
RELEVANCY SCORE 46

I have two Windows 7 64 bit systems that worked perfectly until approx two weeks ago. They started becoming unresponsive to various websites, such as b1015.com (unable to listen live). Both computers then started having problems opening sites through google searches.
 
Following this, most updates on both computers fail. Downloads from the internet fail. Updating flash on one - failed. downloading .net framework update - failed.
 
One computer has MSE - updated and ran scan - no threats found
One computer has AVast - updated and ran scan - no threats found
 
Tried to download malwarebytes on the computer with avast - failed
went to XP station - downloaded to thumb drive and installed from thumb drive and ran  - no threats found
 
from cmd prompt -  ran sfc /scannow on both computers  -  no problems found
 
Can anyone give me any ideas of where to go from here to get both of these computers working properly again
 
VR-
 
Bec

A:Updates Fail/Downloads Fail/Flash Sites Fail x2 computers

The first place to start is are you getting any error messages when the updates fail? What do the messages state -- for example, do you get any error codes? Please post that information here.

Read other 6 answers
RELEVANCY SCORE 45.6

I restarted my computer like normal and for whatever reason the computer is now stuck at the Acer boot screen. I try to press DEL to enter Setup and I even tried pressing F12 to go into the Boot Setup, but for whatever reason the computer does not respond to anything.

To shut it off I have to hold down the power button and eventually it shuts off.

Stuff to know:
- I have a wireless mouse and keyboard being used on that desktop.. Should I perhaps try to plug in a corded mouse and keyboard?
- I'm running on Windows 7 Ultimate.
Thanks
 

A:Acer Aspire E4600 Desktop Frozen At Acer Boot Screen

Read other 6 answers
RELEVANCY SCORE 45.6

can anyone help, i restarted my aspire 1642wlmi last night. when i restarted it everything was going normal untill it got to the blue screen that says acer aspire series, before the users of the computer show up. it just freezes on that screen. i've restored all the default settings and that hasn't done any good. thanks for your help on the matter. i do appreciate any info that you can give me.

Read other answers
RELEVANCY SCORE 45.6

I have went into the bios settings and have changed it to legacy support legacy first , but it doesnt work, it actually makes it worse. I'm not sure what to do. Computer was bought 2 months ago.

Read other answers
RELEVANCY SCORE 45.6

Hi there,

I've recently built a new rig and I've had continuous problems trying to boot. I have two HDDs and one SDD. It seems when the two HDDs are plugged in, i can sometimes boot ok, and most times i get:






Quote:
Windows failed to start. A recent hardware or software change might be the cause.

Status: 0xc000000e

Boot selection failed because a required device is inaccessible


Or

Please select a boot device, or something to the affect.

I've updated to the latest bios on my new mobo ( Gigabyte z97x SOC Force ) and ive done a fresh install of windows several times on the SDD. I also ran crystal disk to check health on the SDD and it came back healthy.

It seems mostly my boot problems are linked to plugging in the two other HDDs, though I've no idea why this would be, and how to fix it? Is it a motherboard problem or a HDD problem?

Any help greatly appreciated.

A:Windows boot fail: Boot selection failed because a required device is

Hi

Please post a screenshot of "Disk Management" as per this guide - Disk Management - Post a Screen Capture Image

( Make sure all disks are plugged ).

Read other 7 answers
RELEVANCY SCORE 45.6

Hi i want to duel boot windows 7 and windows 8.1...i have a 240gb ssd with windows 7 already installed on it....i also have a 2tb storage hardrive and i use this for storage..btw this hardrive did have my windows 7 on it untill i bought the ssd then i ported windows 7 on to the ssd using Paragon Migrate OS to SSD...then i formatted the 2tb drive and have it as a storage drive now.

Ok so my problem is when i split my 2tb storage drive into 2 partitions using AOMEI Partition Assistant Standard Edition ("i intend to use the one partition of about 750gb for windows 8.1") ..however my computer will not boot anymore? i get a Status Oxc0000225 The boot selection failed....i belive this is because the storage drive still has the mbr on it from when it had windows 7 on it...in fact i know it is still on there but i dont know how to delete the mbr from the storage drive???

If i split the storage drive into 2 partitions the computer will not boot....if i disconnect the storage drive and boot with only the ssd it will boot again my pc boots again....also if i rejoin the storage drive back to one partition and reconnect it..it boot fine with it connected again....so there for some reason windows on C drive does not like my storage drive having a different size or being 2 partitions and it appears it needs some information from the storage drive if conceted to be able to have successful boot??... could this have something with the old MBR on my storage drive from when windows 7... Read more

A:Oxc0000225 boot fail after resizing storage drive want to duel boot

Quote:
Can i delete the mbr from the storage drive


no






Quote:
does my storage drive need an mbr?


yes





Quote:
and can i ever restore that drive back to a primary drive?


yes make sure none of the volumes on it are marked active

Read other 3 answers
RELEVANCY SCORE 44.8

My story:  The hard drive failed in my Y510P a few weeks ago, so I installed a 512 GB M.2 NGFF ZTC SSD.  (I bought the SSD a few months ago when hard drive first had symptoms, but then held off installing it due to lack of time and because HD passed diagnostic tests with no apparent problems).  Anyway, after the HD finally failed, I found I could boot it to BIOS and see the hard drive information, even though I couldn't boot the HD.  I originally had Windows 8.1, but had upgraded to Windows 10.  Prior to upgrading to Windows 10, I had backed up the recovery partition to a USB drive.  After physically installing the SSD, I tried using this recovery USB to clean install Windows 8.1 to the SSD (thinking Windows would then prompt me to upgrade to Windows 10 again), but the recovery software was unable to do that (so what good is the recovery software if it cannot deal with a catastrophic HD failure?).  Not that I wanted to go back to Windows 8.1 again, but I am really surprised it was basically useless under circumstances it might really be needed.  I was just trying to use it as a stepping stone in the recovery process. So next, with a little searching, I found I could download a Windows 10 installer directly from Microsoft.  I did that and it installed Windows 10 without any trouble. Yesterday morning, I found that my Y510P would not boot the new drive.  It would d... Read more

Read other answers
RELEVANCY SCORE 44

hello Every one

Over last week i had problem in my Windows7 to boot
I get Over than 20minute to boot (Repair/Formate Or normal boot or in CD)
despite my config :
Os : Windows Xp
CPU : Core2Duo e4600
Gpu : Nvidia Ge Force 9500GT
Ram : 2go


sorry for my bad language
and thanks you for your help

A:Fail boot in Windows7 (repaire or any boot)

So, you have a Windows 7 disk and when you place it in the disk drive it takes a while. It's relatively normal for disks.
Once it's installed the boot times will be much much much less.

What are you trying to do? You want to install it over the current Windows XP?

How much time does it take to get you to the screen where you choose the language? Can you proceed?

Read other 9 answers
RELEVANCY SCORE 42.4

Hello,

I have a problem. Here is the situation. I started out with a two 500 gig raid striped hdd running windows 7. I recently acquired a 1tb wd black hdd and installed a fresh copy of win7 on that while the previous RAID setup was still active so I could easily copy files over to the 1tb as needed. The 1tb drive is also part of the RAID as a non-member disk.

The problem I am having is that without the original hdd's, windows will not boot on the 1tb hdd alone. It seems as though the boot information is all on the striped setup. When they are active, I have a choice to select the original os on the striped hdd, or the new one on the 1tb. I ran windows repair with the 1tb hdd alone and it said there was no system disk, but said it repaired, yet it still asks me to insert valid boot media in bios.

Anyone know how to make my 1tb drive bootable without the RAID drives present?

A:fail to boot

   Information
Boot up using the Startup Repair CD or Windows 7 DVD. (not the OEM manufacturer's Recovery Disk) If you have a Netbook, you will need a CD/DVD drive.
NOTE: Make sure no USB drives are plugged in.

Do not use a USB Pendrive for Startup Repair.


With only the 1tb plug in,
1) Use the Rebuild BCD in this tutorial:
How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows



2) FIxMBR.




Do a Strartup Repair:
Startup Repair
Note: You may need to do startup repair 3 to 4 times.
Startup Repair - Run 3 Separate Times

Read other 9 answers
RELEVANCY SCORE 42.4

Hi guys, I just got this new X1C 4TH today, which I waited for almost 3 months... But the frustrating thing is that it was stuck at the "Just a moment" phase for more than 2 hours.I disabled the wireless LAN, wireless WAN and bluetooth in the BIOS settings, as some other guys suggested on the web. And then I rebooted it. But still it was stuck at the "just a moment" phase for more than 1 hour by now. Does anyone can lend a hand here? Much appreciated!

Read other answers
RELEVANCY SCORE 42.4

Hello , I have a old Notebook (Laptop) with 2Gb Ram, like in the description a Compaq V6000 model 6180ea It's pretty old, but I need him to use it . Some time ago, I've buyied a new Power Adapter because the last one was damaged and everything was working fine until now. It seems the battery doesn't work anymore, but I'm surprised because with no battery the laptop, boot up , shows the way to open the BIOS and after that he shut down. If I access the BIOS, he doesn't shut down, but he stay open until I save and exit from BIOS and after that shuts down again... Why so? All this because he doesn't have a battery anymore? On my other Notebook from Hp, I use it connected to the power directly. I connect the battery to the laptop when I'm away from home... and it's work fine.... What I can do to solve this problem with this old laptop too? I hope you can help me. Thank You!  Claudio_S

Read other answers
RELEVANCY SCORE 42.4

For the past week our class has been assigned a "broken" computer to fix. Our teacher created some problem that prevents Windows Xp Pro from booting. It finishes loading off bios and immediatley after it "Verifies Dmi Pool Data" and attempts to load Xp off the hard drive it hangs. We know it is a hard drive problem because we replaced the old hard drive with an identical new one and the machine ran fine. We have tried every thing and we are running out of ideas. We are able to boot to command prompt using XP rescue disk. We have 18 people and limitless resources trying to solve the problem and we still cant do it. If there is anyone out there who can offer help of any kind it would be greatly appreciated.

800mhz celeron
Windows Xp Pro
Maxtor 20 gb Hd
Shuttle Mother board

 

A:Fail to boot XP Pro off of Hd

Read other 10 answers
RELEVANCY SCORE 42.4
RELEVANCY SCORE 42.4

Hi guys,

I am currently typing this in safe mode as when my computer attempts to start it gets past the windows loading screen then goes completely blank.

The signal just stops as the monitor power light flashes, which means it is not receiving a signal.

I have not placed any new software or hardware it has just happened, does any one have any ideas please?

Thanks

Phil
 

A:XP Boot Fail

I think that it may be an application causing the problem. Go to Start / Run and type msconfig Go to the startup tab and start removing items one at a time and restart the computer. Do Not remove the anti-virus or firewall if there. This way you should find the culprit.
 

Read other 2 answers
RELEVANCY SCORE 42.4

Last night my pc was running fine and just before I went for some shut eye put my pc into sleep mode
today I woke my pc only for it not to allow me to log on, mouse movement only nothing was clickable so after a short while I decided to reset
upon boot I got the green loading bar but then a black screen after about 20 mins I gave up and tried a restore last good config.... Yeah nice one it bsod on me At 55% chkdsk and now I get a windows boot manager error
file: \boot\bcd
I tried Bootrec /RebuildBcd but it brings back an error that it can not create the new file as the file already exists
I'm not having much luck with the recovery disk for repair options as it can't seem to find the OS and brings back errors of can not recover
everything seems on a go slow and ubuntu can't find my c drive
even tried spin right and that can't recover a bad sector
I'm at a loss as to what to do befor the fresh install option
I'm on my last option to try use a back up store disk but I'm of the opinion that not even that will help
edit: I'm now sat at system recovery where no drives or OS ar showing

A:Boot fail

The surest way to fix it is a Complete reformat and re-install of windows.

That's what I did.

Can you enter Safe Mode? If so, at least you can save all of your files.

Read other 11 answers
RELEVANCY SCORE 42.4

When i start my Laptop its come with a black screen and just ( _ ) symbol is blinking I change the first boot option with HDD but its not working. I tyed repair mood but it failed, also i try chkdsk /r but its boot failed again. when i try Live CD and select " Boot from HDD operating system win7/vista" then its run properly. but in normal mood ( without live cd ) windows is not booting i think its a boot loader problem. HDD is brand new with single Windows 7 OS.

How can i solve this problem?? please suggest me.

A:HDD Boot Fail

Quote:




i try chkdsk /r but its boot failed




If Check Disk (chkdsk /r) fails, that would mean your new HDD has either failed, or is not plugged in.
Boot into Setup (Bios) is the HDD recognized here? Pull the HDD out and re-seat it until you see it in the Bios.

Read other 3 answers
RELEVANCY SCORE 42

Hello, sorry for my english but This forum is probably the last thing that could help me.
I rode other topics about this problem. When I start computer it stops right before "Starting Windows" and there is only a black screen. I cant start windows any way.
So i put a disc with windows and try to repair but it said: "there is no problem with windows starting"
Than I started a console and try to insert c: and then
bootrec /fixmbr and fixboot
but fixboot doesn't work - I dont remember literally but it said something like: there is no filesystem/wrong filesystem

when i try to scanos it say that there is 0 operating systems.

Then I tried to run gparted to flag a disc, but it showed me different partitions configuration then ive got on windows - there is no windows disc!

oo.. i tried also to build BCD but when i had to put command: cd boot it said there is no comand like that

Please help me... I dont want to make a format...
Are there any different ways of fix it?
Sorry sorry from my english

A:Windows 7 boot fail

Does the HD register in BIOS setup? Is it set first to boot in BIOS setup, after CD/DVD drive? Try booting HD maker's diagnostic/repair CD to run extended scan: HD Diagnostic

Check for infection by installing, updating and running full scan with Malwarebytes in Safe Mode with networking. If no Safe Mode then download, burn to CD or write to flash stick, boot and run a full scan with Microsoft Standalone System Sweeper.

Boot back into the DVD REpair console or Repair CD to see if it discovers an installation to repair. If not, click through to Recovery Tools list to open command Prompt, type bootrec /fixboot and bootrec /fixmbr to see if it will now show an installation to repair. Do not change the drive letter as you say you did. If it now finds an installation to repair run Startup Repair repeatedly regardless of its finding at first. Next try System Restore from the Repair tools list, then using Command Line SFC -SCANNOW Run in Command Prompt at Boot

Next boot free Partition Wizard bootable CD to see if the 100mb System Rserved partition (preferred) or Win7 partition are still marked Active. If not, rightlick to Modify>Set to Active, then highlight the HD, from Disk tab select "Rebuild MBR", apply steps, reboot to see if it will start. You can also Explore the partitions to see if your files are intact; if so the OS should be reparable unless you damaged it with previous repair attempts.

You can copy out your files using DVD/Repair CD: Copy &a... Read more

Read other 1 answers
RELEVANCY SCORE 42

Using:

Win7 x64
DT Utilities PC Backup Pro 11

I tried to create a disaster recovery backup of my OS drive, restarting the computer when prompted to after being informed that it was necessary due to files being in use. Upon reboot I am presented with the message. "Insert start up disk into floppy drive and press F2 to run setup". Along with this message there are two two partitions from my drive I can choose from.

The first, labelled "Win 7/2008", brings me into Windows as could be expected.
The second, labelled "Linux", does nothing, as upon selecting, it stops after showing the message "Loading boot sector...booting..."

This selection screen now comes up every time I boot. How can I remove it? I had hoped removing the backup software which caused this would help but alas no.

A:PC Backup Pro - Fail at Boot

Hello.


Install this to Windows 7 to see if there's a boot entry that can be removed and be sure to post back with any further questions you may have and to keep us informed.
EasyBCD Free Boot Manager Software

Perhaps you would have better success using Macrium and yes, you will have to create a Macrium boot disk to restore and image if need be.Imaging with free Macrium

Read other 5 answers
RELEVANCY SCORE 42

While running Vista (64 bit) I was restarting my computer due to yet another freeze up I noticed something weird. Once I booted up the screen was completely black and slowly turned white from top to bottom and slowly faded to reveal the display logo for my motherboard. After about 10 minutes it would finally show me a different screen saying

Keyboard error or no keyboard present
***** Warning: System BOOT Fail *****
Your system last boot fail or POST interrupted.
Please enter setup to load default and reboot again

Press F1 to continue. Press DEL to enter setup.

I have not changed any files or added anything and because it will not recognize my G15 keyboard I am stuck with a useless $3000 computer.
Can anyone offer any ideas on how to fix this?

A:System BOOT Fail

** Hello & Welcome, TheFox
**
** Thank you for choosing TSF for all your computer related problems, I hope we can be of service to you and
** hopefully resolve your thread. How do I mark my thread as resolved?
**
** Before I begin, please refer to the TSF rules and please follow all of them, as you will be reported if
** any of them are broken.
**
** If you have any problems, concerns, comments, etc. don't hesitate at all to PM either myself or any
** other Microsoft team member/staff member.
** If I don't respond to your thread within 24 hours PLEASE PM me and I will post back.

- - -

Try reinstalling.

What is the origin of your OS? Is it legit?

- - -

Regards,
Undocked Windy & TSF Staff

Read other 2 answers
RELEVANCY SCORE 42

Hi Im running Vista 64bit on my computer and all of a sudden it wont boot up properly.

My machine is (sorry if bit vague not 100% without looking on comp):

Asus Crosshair Motherboard
AMD Athlon FX Dual Core 64bit
2 Gb of DDR2 RAM
Gefore 8600GT
SATA 250GB HD
Firstly it will play up by powering up then cutting out, but then I figured out sometimes if i keep pressing the reset button it will power up long enough to display something up on screen then comes up with this message:

System boot fail
Your system last boot fail or POST interrupted
Please enter setup to load default and reboot again
So I have done this and it either just crashes or starts to show the Vista loading bar but just stays like that for hours. Also the screen every now and again will be all glitchy (eg text is not readable and random marks across the screen.

I have tried putting the Vista disc in and it just says windows is loading files the bar gets to 100% and nothing...it just hangs again.
It did this once a week ago and I managed to try all of the above, then unplug it all come back to it about 4 hours later and seemed to boot...but not this time

Now I am very worried as my other machine has started doing something similar:

It says

Hardware Initiate Failure Please check device
The bios does not be installed press (g) to continue!

Dont ask me how I have this working at the mo I unplugged everything, had the windows disc in reset bios to defaults etc a mixture of that somehow has this machine ... Read more

Read other answers
RELEVANCY SCORE 42

ok, I'm at my wits end ya'll. I've searched for this problem through the many search pages of Google, and I still have yet to find a problem similar to mine.

I'm going to sell my old desktop to a friend, it has a ASUS P5N-D (SLi version, not Deluxe) w/ 8GB of OCZ RAM and a Wolfdale 2.8GHZ Dual Core CPU. Now, when it boots up, I see the BIOS splash screen, then goes to POST, then it comes up with that error. I've checked to make sure my HDDs (two 1TB WD SATA, not in any RAID configuration) are seen by the BIOS, in which they are (and my cheap ASUS DVD+R drive).

I've check my drives by connecting them to my new computer via SATA -> USB kit and all drives are formatted to NTFS with nothing on them. I can't really find a problem with the drives, and I still get that error when I try to load up Windows 7 Home Premium x64.

I'm out of ideas and was wondering if anyone could point me in the right direction.
 

A:Disk boot fail

How old are these drives? It is possible that the one with the windows installation just bit the dust. Harddrives aren't the most reliable pieces of hardware and they get a lo of use. Check your bios to see if S.M.A.R.T. reporting is on. If it is disable it and reboot. If that doesn't work you could try popping in your windows 7 disk, booting from that and see if you can repair/restore. That's all I can think of.
 

Read other 5 answers
RELEVANCY SCORE 42

Hi, I know there have been numerous threads on this, but each case is slightly different, not to mention that I've tried most of solutions described there and they didn't work. I reinstalled Windows 8 system on my Y580 (using OneKey Recovery). Worked ok after. Then I proceeded to apply all the system updates from Windows Update and some driver updates. After that I restarted the laptop to apply changes and the system stopped booting. The HDD is detected. The boot menu at the beginning only had EFI Network 0 for IPv4 and EFI Network 0 for IPv6 and both failed boot. Later the Windows Boot manager appeared at the top but it also fails each time. After the failed boot it then proceeds to show the OneKey Recovery screen again. When I use it, it works, but after reinstallation it's the same - failed boot and OneKey recovery. When I use a bootable USB installation of Win 8.1 (there's none for Win 8 apparently) and try to repair/reinstall etc. that way, I get a message that the disk where Windows is installed is blocked. Any suggestions?

Read other answers
RELEVANCY SCORE 42

Hi, Whenever i boot my computer, a screen will come up saying " Warning system boot fail!" and will list my 2 entries "primary master ide : None" and "master slave ide : None". Under this it lists my 3 devices in sata 1st being my primary hdd, 2nd being my cd rom and 3rd being my secondary hd.

Now all this has started since i installed a new graphics card onto my system, since then i have done a clean install of windows, updated graphics drivers and rummaged around bios to no avail. Please can someone help me.

Forgot to mention it gives the option to press F1 to go on regardless, but pc doesn't seem as stable as usual.

A:System Boot Fail

If you've done a clean install, then most of the options I would suggest here don't apply as that would have resolved most issues including most boot issues. Normally I would suggest a Startup Repair and then bootrec.exe to reset the boot configuration - back to the original if necessary - but both of those are essentially covered with a clean boot.

I suggest you check for updates to your BIOS (from your computer manufacturer) and install them. In fact, do so even if they are the same version as there may be some corruption or some other problem and a fresh copy may solve the problem. Then triple-check the settings to make sure that everything is configured properly because this sounds very much like a BIOS problem of some sort (even though you say it started with the new graphics card). Be sure to check any graphics-related BIOS settings (if any) as the new card may possibly require some changes.

If that doesn't work, do you still have the old graphics card and does it work (or a card from another computer you can borrow for testing)? Try replacing the current graphics card with the original or other (and change the drivers of course) and see if the problem goes away. If so, you may want to confirm that the new graphics card is compatible with your system (the version of Vista you are using, the motherboard into which it is inserted, any BIOS graphics settings, and everything else) and that it is not defective (though I don't understand how even then it would cause ... Read more

Read other 11 answers
RELEVANCY SCORE 42

hi all...

so here's the situation. (p4 2.4GHz, ASUS P4PE MOBO)

the outlet my computer is connected to was shut suddenly shut down and on again while my computer was on. i am connected to a power surge.

upon restart, the bios hardware monitor gives an error msg
"Hardware Monitor found an error. Enter Power setup menu for details"

so i go into Hardware Monitor and notice that 2 things are in red:

CPU fan speed = is 0
Chassis Fan Speed = 958 RPM

now, my fan is clearly going so thats not right.

at this point i suspect the Power supply, but all voltages in the Voltage monitors read correctly:
3.34V, 5.02V, 11.96/12.03 V. moreover, i hear and see that my cd rom are working.

so, i go ahead and tell bios to IGNORE the 2 FAN speed errors and only then my bios continues on.

instead of a windows OS startup screen, i get "PRESS ANY KEY TO REBOOT"

when trying to boot from cd-rom i get,
"NO EMULATION, COULDN'T FIND NTLDR"

so im not sure what the problem is, is the very initial problem that my bios though my fan speed = 0?

if so why? is it powersupply? motherboard?

i thought a power surge protector was suppose to prevent this.

if anyone has any idea, PLEASE let me know,

thanks
 

A:DOH! can powersurge cause BOOT FAIL?!

so after more research, here are some new conclusion and questions that may help.

essentially, there are 2 issues...

1. why is my BIOS telling me that the CPU and CHASSIS FAN SPEED are incorrect?

---> we can rule out the power supply since voltage readings are what they should be. i'm thinking this implies that something is wrong with my motherboard.

2. the OS is unable to boot from CD or Harddrive.

---> now i'm thinking that #2 is really a continuation of #1. if there is something wrong with my MOBO, then i assume i'm not going to be able to boot normally. this would also seemingly explain why i couldn't boot from cd rom. can i rule out an issue with my harddrive for the time being since broken harddrive or not, i should still be able to boot from my cd-rom (I REALLY HOPE NOTHING IS WRONG WITH MY HD)

so here are some ideas i had for possible tests / solutions... ( i could def use some advice here)

i was going to remove the Clear RTC RAM jumper on the motherboard. its the little jumper by the lithion battery that "clears the CMOS memory of date, time, and system setup parameters" and reset to default system settings.

one thing to note is that last night, i just randomly removed that battery, i forgot i removed it, and continued to turn the system off and on as normal. i didn't notice a single change in what was already happening.... that battery is suppose to power the RAM in CMOS and removing it altogether cau... Read more

Read other 1 answers
RELEVANCY SCORE 42

Hi all,
 
 
I just had this happen to be after running CCleaner.
 
 
I ran the diagnostic during boot and found those nice little red letters on the screen: BIOHD3
 
Afterwards, I tried to directly boot the hard drive and went right into normal start up.
 
 
 
 
 
Any help would be truly a blessing!
 
 
 
 
D

A:Boot fail: BIOHD3

FWIW:  http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/BIOHD3-Error/td-p/1185447 AND http://h30434.www3.hp.com/t5/Desktop-Hardware/Error-Code-BIOHD-3/td-p/1903453 .
 
Louis

Read other 1 answers
RELEVANCY SCORE 42

I currectly trying to fix a presitant problem on my computer. Often when i boot up my computer, it stops completely just before checking which drive to find the boot record. I reset with ctrl-alt-del and then it repeats and just freezes at the same place. If i shut it down for a 5 mins and then turn it back on it will boot correctly by searching the floppy,cdrom, then harddrive for boot record.

I just formatted my computer and this problem is even more occuring. Does my computer need a bios reset or update?
 

A:fail to find boot log

Read other 14 answers
RELEVANCY SCORE 42

Was recently infected by the "Vista AntiVirus Pro 2010" virus and in the end, had to run a boot scan with avast to get rid of it. Virus is clear now but no program is working correctly. Every single program on my computer is asking for you to locate the file like in the screenshot below. And if I close the program and re-open, I'll need to find it all over again every time. For the love of god, help me!

A:Boot Scan Fail

Try this Go to search, type in default programs. Once there click associate programs. Inside, set up the programs with the correct way to access them.

Read other 34 answers
RELEVANCY SCORE 42

Recently I just tried starting my computer on and it wouldn't boot.

I left my computer in locked mode then it eventually went to sleep.

I kept trying to restart it and had no luck, I checked inside the cpu was running and the dvd drive was still able to open and close. My USB mouse or keyboard weren't powering on though neither was my monitor showing anything I didn't hear any beeps. So I kept disconnecting the power outlet from the wall since that's the only way I could restart it.

Eventually it came back and I got startup repair opening by itself
http://farm4.static.flickr.com/3474/...f6d248.jpg?v=0
http://farm4.static.flickr.com/3430/...23b465.jpg?v=0
That's what I got from the error.

Here are my computer specs
400 Corsair PSU
640HD SATA HD
4GB Memory
AMD Phenom II x4
GIGABYTE GA-MA78GPM-UD2H AM3/AM2 with ATI Radeon HD 3200 onboard GPU
Windows 7 Build 7100 64 Bit

Eventually the system started backup fine after going through startup repair. All my files still there.

If it matters I was using the onboard graphics having one monitor running in VGA and the hdmi connecting to my tv.

A:Why did my windows 7 boot fail?

Probably an error that comes with the RC since MS still calls it a beta build

Read other 9 answers
RELEVANCY SCORE 42

Hello my name is Josh and I would really appreciate anyone's input on this:

I've recently decided to put together my own computer. It's cool how I saved money buying the separate parts, and the process of putting everything together has been a good learning experience so far. The only problem is, after finally ordering Windows XP Professional x64 bit, and inserting in the CD/DVD-ROM for that moment of glory, the BIOS still tells me that it's failing to boot the disk.

Here are my specs:

Gigabyte S-series model P35C-DS3R motherboard http://www.gigabyte.com.tw/Products/...ProductID=2551

Intel Core 2 Quad Q6600 CPU (2.4 GHz) http://accessories.us.dell.com/sna/p...682&lid=585550

NVIDIA e-GeForce 8600 GTS Graphics Card http://www.nvidia.com/object/geforce_8600.html

Western Digital SATA 300 MB/s, 400 GB Disk Space, 16 MB Cache, 7200 RPM Hard Drive http://www.cheapstingybargains.com/3...d-125-shipped/

Samsung SH-S203B DVD Writer http://www.samsung.com/in/products/o...s/sh_s203b.asp

Thermaltake Purepower 500W Power Supply http://www.thermaltake.com/product/P...94/w009394.asp

Antec Nine Hundred Ultimate Gamer Case http://www.antec.com/us/productDetails.php?ProdID=15900

As I scroll through the BIOS I'm using an old Compaq keyboard from a piece of history...waiting until the operating system is up before I install my wireless Logitech keyboard. I set my priority boot device as the CD-ROM Device in Advanced BIOS Screen, as the manual tells me this is all ... Read more

A:Disk Boot Fail...?

Hi Josh and welcome to TSF !

Most of the links you posted about your hardware are invalid, maybe you copy/pasted them from elsewhere ? Here's the link to your motherboard's specs :
http://www.gigabyte.com.tw/Products/...e=GA-P35C-DS3R

Try to boot another computer with your XP pro disk, in case this would be the CD which is not bootable.

Does the DVD drive appear in the detecting primary/secondary IDE/SATA master/slave lines at startup ? Does it appear in the BIOS ?

Refer to your motherboard manual to know which SATA ports you need to use for a master/slave setup with 2 drives. Logically the hard drive should be the primary master and the burner the primary slave. Try other SATA ports and see if it helps (Fyi, my Asus motherboard refuses to boot if the CD-rom is set on the SATA3 connector but boots fine when it's on the SATA5, no idea why).

Else try with an IDE CD drive (borrow one from another computer). Hook it at the end of the IDE cable and set its jumper to master if any. Tell us how it works.

About your XP 64 pro CD, did you get a license key with it ? Without it you won't be able to use it for more than 30 days. Note that XP 64bit is not a gaming nor a home computer OS. You'll have a hard time finding the proper drivers for your hardware, you may have stability issues with some programs that were not designed for a 64bit OS and you won't see any increase in performances over the regular 32bit version. There are only a few professional apps which will... Read more

Read other 1 answers
RELEVANCY SCORE 42

I will try to sum this up a bit..
I have Windows 7 64-Bit, and about a month ago I was having problems booting.. I went straight to safe mode and was able to use Diagnostic Startup from MSConfig.. The machine booted fine and I was able to get in and run virus scans. Nothing was found using AVG, Ad Aware and other programs.. So I thought well lets try Limited Startup and that worked! So I downloaded a few registry cleaners and what ever else I thought I might need.. I ran all the scans I could think of.

So then I decided lets try full startup and that was not a good idea.. I now get hung just after the Windows Logo screen before the Login Screen.. Actually I have made it to the Windows Login Screen a few times and put in my password but it says windows starting and then windows shutting down..

I can not get into safemode now either as it will hang with the last line showing "avgdisha.sys" So I goodled that and I get a response from AVG claiming they screwed up the Windows 7 64Bit edition with their latest upgrade. They put out a CD to help wipe out whatever the issue is, but my computer has wireless internet so the CD didn't seem to want to do anything..

I have run Scandsk/f but the system tells me there is a repair pending and must reboot to complete, but I can't reboot.. So I run Chkdsk/f and it completes, but when I run chkdsk/r its freezing at Stage 4 of 5 13% verifying data..

I have been attempting everything I can think of and find on google and... Read more

A:WIndows 7 Won't boot! AVG? HD Fail?

Read other 8 answers
RELEVANCY SCORE 42

Briefly, Ive been using my W530 for 4 months without issue.  Last month I was prompted for a BIOS update via Lenovo Update. The BIOS was then flashed and updated. Since then I have been plagued with random shutdowns and the inability for the laptop to power on when hitting the power button. The only way to power on my laptop when having these issues is to use the ritualistic 10 press of the power button followed by a press and hold for 30 seconds of the power buttton to discharge potential static. This worked, until recently it would not work at all. I then removed the CMOS under the laptop keyboard and the machine was powering on with one press of the power button and didnt randomly shut off anymore. The new CMOS battery arrived and I installed it and now the machine fails to power on at all with or without a CMOS wether its the new one, old one or none at all. When pressing power you hear a noise as if something is running through it and then the green circle around the power button stays solid for 3 seconds then it goes off and it never starts. Any thoughts from the community possibly? Thanks for your time and effort.

Read other answers