Over 1 million tech questions and answers.

BSOD After Laptop Being Down for 6 Months

Q: BSOD After Laptop Being Down for 6 Months

My Dell Inpiron 6000 has been inactive for about 6 months. A friend's pup chewed through the power supply cord, and since I was living with someone who had a PC, I put off getting a new power cord. Everything was fine the last time I used the laptop.

Finally got the new PSC. Plugged it in this afternoon and immediately got a BSOD when XP was trying to load.

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

Technical information:

*** STOP: 0x00000024 (0x00190203, 0x823D9590, 0xC000102, 0x00000000)






HELP! :( Please.... Any ideas???

I need to try everything I can before taking it to the IT guy.... There are some... ummm... pics that I wouldn't want him to see if/when he gets it up & running.

I appreciate all the help in advance!! :)

RELEVANCY SCORE 200
Preferred Solution: BSOD After Laptop Being Down for 6 Months

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD After Laptop Being Down for 6 Months

Needed to add:

It will not boot up at all....

Not in Mode of any kind.

Read other 19 answers
RELEVANCY SCORE 58.8

Hi guys. I bought an Acer laptop from Argos only 2 months ago and all has been well with it up till the last week or so.

The laptop began to get slower and then eventually begam to freeze at windows loading screen.

I get a blue screen with the STOP code: 0x0000007B

I have re-installed the ACER backup version of windows several times and all is well for the first few restarts then gradually begins to get slower again until eventually it wont boot. When it does manage to load windows the HDD light is constantly on and the Laptop is so laggy. I cant seem to do anything for about 15 minutes. I have CTRL-ALT-Deleted and there are only a few processes running and the CPU is only 15% in use.

I have tried my dads version of Windows 7 incase the Acer version was corrupt and again the same thing happens. I have also tried XP and again same thing happens.

I have searched and searched but there doesnt seem to be an answer to the problem. I have tried changing the BIOS settings (ie. changing sata to IDE) but still to no avail. A friend gave me another hard drive so I could test that and it gave the blue screen straight away. However this time when I changed to IDE in BIOS it loaded windows from his Hard disk.

I decided to re-install yet again but this time its taking for ever so it seems that it is gradually getting worse.

Here is the Laptop AS5820T-354G32Mns | Product Model

Any ideas? I was thinking can I try and re-install Bios via the ACER support downloads?

A:Laptop slows then freezes. 2 Months old. BSOD

Hello b_kennedy and Welcome to TSF,

I'm moving this thread to the BSOD/Crash analysis part of the forum instead. Please read through the posting instructions found here if you want us to analyze the BSOD's and let you know the cause of it.

After that we can determine if it's a software fault, which we can help you with. Or if it's a hardware fault, in that cause you should have a valid warranty on it as it's only two months old.

It's up to you whether you want to go through the troubleshooting or hand it in.

Read other 8 answers
RELEVANCY SCORE 57.6

Hello,
Here is the problem I was having before for reference:

http://www.sevenforums.com/crashes-d...v4-laptop.html

I don't know if this problem and the previous are related, so started a new thread. After re-installing the OS everything worked fine until a few weeks ago. So flawless for about 2 months. Very intermittent BSOD has become more frequent, just as before. Attached is my zip file for examination. Let me know if any further information is required. Thanks for your help!

A:BSOD starts 2 months after clean re-install of Windows 7 on HP Laptop

Hello there!

Since the reinstall of Windows if it still BSOD'ed then it could be Hardware. Run Hardware Diagnostic (RAM and hard Drive) Hardware Diagnostic | Captain Debugger

Check for BIOS update. It's pretty out-dated.

BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\082312-15927-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Fri Aug 24 02:06:49.692 2012 (GMT+6)
System Uptime: 0 days 0:53:47.174
BugCheck A, {2, 2, 1, fffff80002cd6b36}
Probably caused by : ntkrnlmp.exe ( nt!KiDeliverApc+126 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: chrome.exe
FAILURE_BUCKET_ID: X64_0xA_nt!KiDeliverApc+126
Bugcheck code 0000000A
Arguments 00000000`00000002 00000000`00000002 00000000`00000001 fffff800`02cd6b36
BiosVersion = F.16
BiosReleaseDate = 12/03/2009
SystemManufacturer = Hewlett-Packard
SystemProductName = HP Pavilion dv4 Notebook PC
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\081912-25022-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Mon Aug 20 06:21:01.110 2012 (GMT+6)
System Uptime: 0 days 9:58:55.593
BugCheck 3B, {c0000005, fffff80002f292fa, fffff8800938bbf0, 0}
Probably caused by : memory_corruption
DEFAULT_BUCKET_ID: CODE_CORRUPTION
BUGCHECK_STR: 0x3B
PROCESS_NAME: MsMpEng.exe
FAILURE_BU... Read more

Read other 1 answers
RELEVANCY SCORE 46.8

I update and save quite a few files each day, and I can see in File History that there are many saved versions for these files.
This would fill up my backup drive fairly quickly, and therefore, I need to reduce 'Keep saved versions' from the default of 'forever' to about 3 months.  But does this mean that all files older than 3 months will be deleted my File History backup?
 What happens to all my files that have only ever been saved once, but are older than 3 months?  Are these retained in File History or deleted?
The forums on File History do no make this very clear.

Read other answers
RELEVANCY SCORE 46.8

Hello,
first thing: this is not my pc, so I have experienced just 1 of this bsod (chronologically the last one: this pc had 2 cd/dvd reader, 1 working and 1 not working, to do some tests, I disconnected the working one, at first start the broken one has worked but it gave me that BSOD).

Another info: after the 30/11 an external graphic card was installed (don't know which driver/version).

All the older BSOD (before the 21/01/2015) was not caused by me. I ask you, gently, to have a look at this dumps and help me to find the problem/s. Thank you

A:BSOD differents bsod ntoskrnl.exe in many months

Hello,
some days ago a friend took me his pc because he had got many BSOD (I posted yesterday about that with no luck), many of this BSOD are happened after I have installed in that pc an ATI HD 3650 PCI.

First test group on this machine (Acer T650-99TZ):
prime95: rounding was 0.5, expected less than 0.4 (after 2 minutes)
memtest86: many errors whit 2 stick of ram, 0 errors when testing the sticks singularly
Furmark: test passed with no errors (30 minutes)
hdtune: no errors

Second test group on second identical machine (Acer T650-99TZ + hdd, ram and gpu from the first machine)
prime95: rounding was 0.5, expected less than 0.4 (after 2 minutes)
memtest86: many errors whit 2 stick of ram, 0 error when testing the sticks singularly

Third test group on second and first machine (same hw except for the gpu: here I took out the HD 3650 and used the integrated gpu)
prime95: no errors (in 8 hours)
memtest86: no errors (100% passed)


Ram: 2x1gb 1Rx8 PC2-5300U 555-12 hymp112u64cp8-y5
CPU: Pentium 4 524
Obviously no overclock was made on this pc.
Obviously gpu drivers are up-to-date.

Now i'm trying to donwngrade the drivers of the GPU but I think this won't work, since the problem appear to be an incompatibility between the HD 3650 and the other hw.

Can anyone help me to solve this problem? Thanks

Read other 1 answers
RELEVANCY SCORE 46.4

Hello,
 
Okay first of all I would like to say I have been having on going issues for months to almost a year... I have tried everything I can think of... Including wiping harddrives to DoD standards with dban, gparted etc.... I have tried monitering my connections with wireshark...  I have tried several differet anti- (virus and malware) programs including paid version of kaspersky, malwarebytes, bitdefender, eset.....
 
This problem also has involved some black hat hackers compromising my system and bank account, credit card etc all being hit and continueing to do so... I have switched ISPs , changed hardware, thrown away devices including cell phones and laptops... It seems that they were also backdoored into several of my devices and were using several different methods to continue to spread and infect other devices.. These devices include android, iphone, ipod, ipad, netbook, laptop, smart tv and even my dvd player (java).. I have tried to ask for help and seek help for this and no one can figure it out or think this cant be real.
 
I have now thrown out all laptops, and all phones at the same time and started from scratch but having issues on a brand new laptop... I am not sure this is the same issue as before... However, I would like and really appreciate if someone could help me out and view my logs and make sure.. because I have been through hell and back with all these issues.. Loss of finances, time, and sleep... SO, I truly appreciate any and a... Read more

A:Malware, Spyware, And hackers...equals months and months of going insane!! help!

GMER 2.1.19357 - http://www.gmer.net
3rd party scan 2015-06-29 18:38:16
Windows 6.3.9600  x64 \Device\Harddisk0\DR0 -> \Device\00000036 HGST_HTS721075A9E630 rev.JB2OA3J0 698.64GB
Running: 11ybrc3o.exe; Driver: C:\Users\M4M8A\AppData\Local\Temp\kxldypow.sys
---- Modules - GMER 2.1 ----
Module   \SystemRoot\System32\drivers\iaStorA.sys (Intel Rapid Storage Technology driver - x64/Intel Corporation SIGNED)(2014-09-02 06:28:41)                                                fffff800f9c65000-fffff800f9f1b000 (2842624 bytes)
Module   \SystemRoot\system32\DRIVERS\edevmon.sys (Devmon monitor/ESET SIGNED)(2015-01-30 23:13:30)                                                                                          fffff800fa393000-fffff800fa3d2000 (258048 bytes)
Module   \SystemRoo... Read more

Read other 3 answers
RELEVANCY SCORE 46.4

Hi all, I will be traveling soon and will leave my Acer R13 R7-371t for about 3 months. What should I do to ensure I don't come back to find the battery completely dead or any other problem? Thank you!

Read other answers
RELEVANCY SCORE 46.4

Hi all, I will be traveling soon and will leave my Acer R13 R7-371t for about 3 months. What should I do to ensure I don't come back to find the battery completely dead or any other problem? Thank you!

A:Laptop will be unused for a few months... what to ...

Charge it,Turn it off, unplug it, lock it up. When you come back, plug it in, turn it on.If it doesn't have anything causing it to discharge and a good laptop doesn't, it should be fine. 

Read other 1 answers
RELEVANCY SCORE 46.4

Hi, I have just bought the top end Spectre laptop, but when i used the HP assistant it states I only have 9 months remaining on my warranty?!? Is this correct? if so it's going to be returned!! Dave

Read other answers
RELEVANCY SCORE 46.4

I am running Windows XP 2002 SP3 on my laptop along with McAfee Security Center which is provided by AT&T. The laptop has historically ran very smoothly, but I noticed the performance starting to degrade about 2-3 months ago. It is now to the point where I am suspecting some sort of infection or malware because the performance is so bad. Sometimes, the CPU performance locks at 100% for long periods which explains the slow performance. But other times, there is no explanation ... the CPU performance appears normal (fluctuates between 0-25%) yet the laptop remains sluggish.

I have not made any system changes or recently added any new applications other than coupon printing apps that I have been told are safe.

Can you please help me determine what may be causing this problem? I'll be happy to provide any additional information or run any tests deemed necessary.

Thanks in advance for your help,
-Vanessa

A:Laptop has become VERY sluggish over last 2-3 months

Welcome back to BCWould you run a quick scan with MBAM?Please download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. Th... Read more

Read other 10 answers
RELEVANCY SCORE 46

I don't remember what I was doing with the computer (if anything) when it BSOD-ed last month, but this month I was capturing video from a PVR. Something not very stressful at all and something that's been done hundreds of times before. Attached are the dumps and, being a novice, I have no idea what they mean. Thanks in advance for any help!

Read other answers
RELEVANCY SCORE 46

I'll start off with my specs: -
 
OS: Windows 7 Home Premium x64 SP1
 
CPU: Intel Core i5 4690K @ 3.5GHz (Replaced in Jan 2015)
 
RAM: 2 x 4GB sticks (replaced in March 2015)
 
Motherboard: ASUSTeK COMPUTER INC. Z87-A (SOCKET 1150) (Replaced in Jan 2015)
 
Graphics: 1023MB NVIDIA GeForce GTX 560 Ti (Came with computer in 2011)
 
Storage: 232GB Samsung SSD 840 EVO 250GB ATA Device (SSD)(Replaced in Aug 2014) and 298GB Western Digital WDC WD3200AAJS-22L7A0 (HDD)(Came with computer in 2011, used for storage)
 
PSU: Corsair CX750 (replaced in April 2015)
 
 
Had my computer sicne 2011 and it always worked perfectly. In August 2014 I upgraded to a SSD and put in a newer and better PSU as well as replacing the case. No issues with PC at all and it ran perfectly. In Jan 2015 I had some spare cash and decided to upgrade the CPU and Motherboard. I took the PC to my local shop to have them install these new components for me. They tested it and re-installed windows for me and gave it back. I live my PC on overnight sometimes and when I'd wake up in the morning I'd see that the PC had crashed and restarted. I thought nothing of it and carried on like normal. After a week or two the PC started to crash during use when I was playing a game, browsing the internet or when it was idle. The error code was always 0x000000F4.
 
 
I took it back to the shop and they took a look at it and found no errors so they gave it back. As soon as I bro... Read more

A:BSOD for 5 months - F4 and 7A

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis
 

Read other 2 answers
RELEVANCY SCORE 46

Hi,

I'm fighting a BSOD for about 50 days now, It's happening randomly in different situations for a minimum of two times daily.

I'm suspecting that my memory is the problem (2x2GB Chaintech APOGEE) as it appears in a weird way in Gigabyte easytune (some times appear as one memory module, other times with different frequency and properties for each module).

I ran Memtest86 with one module at a time and there were no errors.

I also ran the Windows 7 Memory test on both modules with no errors.

CPU: Intel i7-930

Mainboard: Gigabyte X58A-UD3R

Display: Geforce GTS 250 1GB

HDD: Seagate 1TB SATA

Windows Version: Windows 7 Ultimate 64

Windows Type: Full Retail

Hardware Age: 2 Months

Windows Age: Around 50 Days (Repaired Two Days ago)

Running Kaspersky Internet Security 2011 11.0.0.232

I appreciate any help, This BSOD causes a serious pain & I lost work many times because of it.

Thanks in advance.

A:BSOD for 2 Months

One error is caused by Kaspersky.. will check further.. and others will be here to take a look. I would recommend removing it and replacing with MSE or another antivirus
Attachment 113115

Read other 9 answers
RELEVANCY SCORE 46

hi i get bsod since a while and mostly while watching videos etc. the dump is attached. i have a dv7 2037ez hp laptop. mobility 4650, amd zm-84 2.3 ghz 4 gb ram. as we know the fan is very loud since ever and the heat problem of a common hp issue exists here too. i had some error cods on bluescreen lie 00...x124 and other i think. sometimes it says hardware error. pls help

A:Bsod once a day since months.

Welcome

Go through this thread: Stop 0x124 - what it means and what to try step by step.

Read other 9 answers
RELEVANCY SCORE 46

Windows 7 is...
- x64
- the original installed OS on the system? YES
- the full retail version

- What is the age of system (hardware)? 1.5 years
- What is the age of OS installation (have you re-installed the OS?) 1.5 years

BSOD has been happening over the last 4 months. I've tried everything I know of and can't seem to figure it out.

A:BSOD, About 4 months going now.

ASACPI.sys the 2005 version is a huge cause of BSOD's






Quote:
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 8th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005)



Code:
ASACPI.sys fffff880`03de6000 fffff880`03dee000 0x00008000 0x42476c4c 28/03/2005 06:30:36
Update UltraMon, it uses an outdated driver http://www.realtimesoft.com/ultramon/

Code:
UltraMonUtility.sys fffff880`05d96000 fffff880`05d9f000 0x00009000 0x491cd006 14/11/2008 05:10:30
Test your RAM, dumps blame memory corruption
RAM - Test with Memtest86+

Code:
BugCheck A, {fffffa7fffffffd8, 2, 1, fffff80002af43a4}

Probably caused by : memory_corruption ( nt!MiUnlinkFreeOrZeroedPage+1ca )

Read other 3 answers
RELEVANCY SCORE 46

Hello everyone

I have had issues with bsods with this machine, since I build this pc. I had it over a half year and found out i had currupted files. I got windows 8 from a shop and installed it. I still have problems with bsod and its driving me crazy now....Hope someone can help me with Analysing these dumps.

btw im from Denmark, so few files may be in danish.

A:BSOD for months...

Your dmp files indicated either you have a bad Video Driver or you have a bad memory stick.

Update your video driver from the manufacturerDownload Memtest86+ - Advanced Memory Diagnostic Tool, burn it to a cd/USB stick and run memtest for at least 6-8 hours

Read other 21 answers
RELEVANCY SCORE 46

I have had 107 BSOD's the last two months, and when I sent the computer into the shop to get fixed up, the only diagnoses the geniuses had was that there was nothing wrong with the computer. This Gateway SX2850-33 was bought in mid-December and has been crashing since April 12th.

I have looked at BlueScreenView and done debuggers (dumpchk/WinDbg). Here is the output from the debuggers


Code:

Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Windows\Minidump\030211-23322-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0xfffff800`02e11000 PsLoadedModuleList = 0xfffff800`0304ee50
Debug session time: Wed Mar 2 11:41:49.869 2011 (UTC - 5:00)
System Uptime: 0 days 0:00:51.024
Loading Kernel Symbols
...............................................................
................................................................
...............................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* ... Read more

A:100+ BSOD's last 2 months

reopen your debugger, load the minidump as normal
then use the command

lm t n

the paste a code of the driver dump info.

Read other 6 answers
RELEVANCY SCORE 46

Hello everyone, I have looked around everywhere to try to sort my problems out but I've had no luck. Now I've decided to bite the bullet and ask for help. I had a computer built about 3 months ago. Everything was fine at first, then I started to get BSOD.

First the errors were due to 'a clock interrupt was not received on a secondary processor' but now they are going into a more serious 'uncorrectable hardware error'. I'm after potentially pinning down the dodgey component and sending it back, or fixing it - and I'm hoping someone would be kind enough to help. I'll try to provide as much info as I can:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA800DD05028
BCP3: 00000000B2000000
BCP4: 0000000000100402
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

I've also included my latest .dmp file. Here are my system specs:

Intel Core i7 2600k 3.4GHz Socket 1155 8MB Cache Retail Boxed Processor
Asus P8H67-M EVO R3 H67 1155 Socket 8 Channel HD Audio mATX Motherboard
Asus GTX 570 DirectCU II 1280MB GDDR5 Dual DVI HDMI DisplayPort PCI-E Graphics Card
Corsair Vengeance 16GB (4x4GB) DDR3 1600Mhz CL9 1.5V Non-ECC Unbuffered
Samsung SyncMaster S22A300B LCD LED 21.5" DVI-D Monitor
OCZ 750W Fatal1ty Series Semi-Modular PSU
Antec 900 Nine Hundred Case with 200mm Top Fan

Any help is g... Read more

A:3 months of BSOD,

It is much easier to find patterns, etc, when there are more than one crash. We prefer you wait until you have at least two so that if one is corrupt the other probably wont be.
That being said the single log blames BCC 101

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT troubleshtg

Read other 1 answers
RELEVANCY SCORE 46

For around the past three months I have been getting the bsod. I have changed hds and reformatted twice to load the os but still get this bsod. Whats strange is that the puter may work fine for days and then crash or then start to crash over and over (reformat). I am getting tired of reinstalling the os so is ther anyone here who can read these minidumps and maybe tell me what to look at first, thanks.

A:BSOD 3 months

For some reason I cant read the minidump files. What errors are you
getting when it bluescreens? When you format are you using the
xp format utility?, if so bad idea, xp does a very poor job at that. If
you had os problems before the format, you will more than likely
have the same problems after the format.

Read other 19 answers
RELEVANCY SCORE 46

To this point, I've replaced the video card and hard drive once, and the RAM twice. So physically it's not any of those.

But I'm still getting crashes when I try to play games, and I can't figure it out. Very frustrating. When I get a crash, it will also crash on startup some of the time.

I would really appreciate some help to get this fixed after months and months of problems!

Windows 7 64 bit (I reinstalled Windows once since installation, but it's off the same installation CD)
OEM version of Windows
Computer is a little over one year old
Reinstalled Windows once, a few months ago I believe

AMD Phenom II x2 (3.1 ghz)
ATI Radeon HD 5670 w/ 2 gigs RAM
Power supply: Azza Xtremegear 600 watt
ASUS M4A78LT-ME LE motherboard

A:BSOD, months later

Please enable driver verifier - http://www.techsupportforum.com/foru...ed-473665.html

You may have a possible virus/rootkit infection. Please read the instructions outlined here on how to scan and remove a rootkit

Please also run a malware scan using a program such as Malwarebytes.

Run a hard drive scan using Seatools


Code:
\SystemRoot\SysWow64\Drivers\tcpipBM.SYS has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.
This belongs to Bytemobile Kernel Network Provider for Bytemobile Optimization Client. Is this some sort of software installed on your system. Try browsing to c:\windows\system32\drivers and changing the extension from .sys to .bak. This will prevent it from loading and should eliminate that error.


Code:
Rt64win7.sys Fri May 22 10:52:30 2009 (4A16BC2E)
Update your Realtek network driver - here


Code:
athrx.sys Mon Sep 21 22:47:11 2009 (4AB83AAF)
Update your Atheros WiFi driver - here. Scroll down a little bit and you will see Click for Download. Click it and the download should start.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Mike\Downloads\Zipped Files\Windows_NT6_BSOD_jcgriff2\032911-30794-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*... Read more

Read other 19 answers
RELEVANCY SCORE 46

Good afternoon

As the title says, I have been getting BSOD for nearly 2 months and I have tried almost everything to fix it as follows:

- I have reinstalled windows 7 and formatted my harddrive
- Sent the pc to an IT expert for 3 days where he performed all sorts of diagnostics and found nothing to be wrong with it
- Sent it to 2 other IT experts and specifically explained to them that they need to use the pc and make sure to turn it off and on about 3 times before the bsod happens again (which they did do) yet the bsod never happens at any one else's house/workplace (perhaps I have a problem with my actual power supply socket at my room??)
- I have made sure all drivers are up to date
- I have run the command prompt "chkdsk" and it found no problems
- I have turned on the pc in safe mode (making sure to do this on the 2nd or 3rd time using it so as to expect a bsod) and the bsod still happens
- I have turned on the pc with only the essentials (monitor, mouse and keyboard) and it still crashes
- The person I sent it to said that there are no problems with the harddrive, motherboard or RAM and CPU (although I am not sure what to believe anymore)
- I have run a registry cleaner using CCleaner and it still crashed

Please help me, I am not sure what else I can try without throwing the pc in the bin. I'v attached the zipped file with all the info from the sf diagnostic tool hopefully you can help me

A:BSOD for nearly 2 months - 1E, DA, 3B and 19

3 x IT experts hey? Apparently not that expert.....


Code:
# Copyright (c) 1993-2009 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
127.0.0.1 validation.sls.microsoft.com
Before we look any further, you need to do this:

1. Download and save this tool to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

2. Run the tool, and then click Copy - ignore any errors if they appear

3. Use CTRL+V to paste the unedited results of the tool here in your next reply

Read other 1 answers
RELEVANCY SCORE 46

? Windows 7 Ultimate
? x64 bit
? Windows 7 Ultimate
? Full retail version
? 2 - 18 months
? I had reinstalled windows 2012.04.27 still having problems

? Intel64 Family 6 Model 23 Stepping 7 GenuineIntel ~2341 Mhz
? Geforce 8600GT
? MotherBoard - MS -7528 (G31M3 series)
? Power Supply - INTER-TECH Booster SPS-520 520W

? MSI
? MS -7528 (G31M3 series)

Started having random bsods like 6 months ago, thought its hardware problem so in that time I changed PSU, RAMs, GPU, new SDD and I still get weird bsods.

A:BSOD's for 6 months

48h Bump + BSOD's from those days

Read other 4 answers
RELEVANCY SCORE 46

Hi,
Since 5 months, I got a BSOD when I'm doing some basics things: Looking at Facebook, playing games (even flash games) I've decided after that to make a DualBoot to Windows 8, previously I had Windows 7, There was no BSOD for 3 days, and it began...

What did I make:
Memtest86+ = No errors, runned 4 passes
Tried to use one stick of ram = Worked for almost 1 day.
Swap the sticks of ram in the slots = Worked for 1 month (wtf happened there)
Ran driver verifier = got a blue screen with rdyboost.sys as the error.
Install all the drivers and make updates (Bios, chipset)
I've BSOD while writing this, the error flagged was rdyboost.sys, I think it's the error, but don't know how to delete or deactivate this thing..
Thanks in advice.

Forgot to add : I have this PC since 2 years.

A:Many BSOD since 5 months

I don't have time to look through all of those mini-dumps but the latest ones I have looked at don't seem to be pointing to anything in particular. This might indicate a hardware problem or a buggy/out-of-date driver.

You have some old drivers you should consider updating to Windows 8 64bit versions or un-installing/removing if un-needed:

AtiPcie.sys - ATI PCIE Driver for ATI PCIE chipset or ATI PCI Express (3GIO) Filter Found in my ATI video drivers (I have an Intel chipset) (2009): Driver Reference Table
AsIO.sys - Asus PCProbe Utility: Driver Reference Table (please un-install this and anything related to ASUS Utilities Suite, known BSOD creator)
ASACPI.sys - Asus ATK0110 ACPI Utility. Also a part of many Asus utilities: Driver Reference Table (please un-install this, known BSOD creator)
LGBusEnum.sys - Logitech Keyboard: Driver Reference Table
netr73.sys - D-Link AirPlus G DWL-G122 Wireless USB Adapter(rev.C) ** DISCONTINUED **: Driver Reference Table

Please update your AMD chipset drivers:

AMD Chipset Drivers

Remove the drivers related to BSODs above using control panel/un-install.

Update your Logitech Keyboard driver: Keyboards

Not sure about the D-Link Airplus Wireless USB Adapter, there doesn't seem to be a Windows 8 64bit driver for it. It's quite an old piece of gear so I recommend not using it in Windows 8. I recommend un-installing the driver via control panel if possible or disabling it by going into: c:\windows\system32\drivers and renaming the driver to ... Read more

Read other 7 answers
RELEVANCY SCORE 46

Hi, I'm coming here because everytime I format my computer into Windows 7, it'll show up a BSOD of uncorrectable hardware error while playing games, but in this case, it's Grand Theft Auto - San Andreas.

Any ideas?

I tried replacing the hard drive, RAM, and updating my graphics card.

A:BSOD for over a few months

  
Quote: Originally Posted by Tony1990


Hi, I'm coming here because everytime I format my computer into Windows 7, it'll show up a BSOD of uncorrectable hardware error while playing games, but in this case, it's Grand Theft Auto - San Andreas.

Any ideas?

I tried replacing the hard drive, RAM, and updating my graphics card.



Hello Tony & welcome,
If you are getting BSOD's & want them analyzed please follow the directions below -

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:
** Until a .dmp file is generated, the Minidump folder may not exist.**

*Go to Start, in the Search Box type: sysdm.cpl Press Enter.
*Under the Advanced tab, click on the Startup and Recovery Settings... button.
*Ensure that Automatically restart is unchecked.
*Under the Write Debugging Information header select Small memory dump (256 kb) in the drop down box (the 256kb varies).
*Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
*OK.
Reboot if changes have been made.

Read other 7 answers
RELEVANCY SCORE 46

Two months ago, I got many BSOD's, and with the help of this forum, the problems were resolved.
Since then, I have not encountered any problems.
Until today. Got a BSOD with a message Bad_Pool_Header
I have not installed any drivers or any software lately. So I do not have a hint what could cause the BSOD.

Here is the result of SF Tools:

Thanks for the support.

A:First BSOD since 2 months

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website). Be sure to update ALL controllers on the motherboard! I STRONGLY suggest not using controller drivers older than mid-2012 with SSD's.
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
- Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
06 Dec 2011 - This post tends to confirm issues with certain SSD chipsets and certain controllers - [SOLVED] cant find the cause of BSOD F4 - Tech... Read more

Read other 3 answers
RELEVANCY SCORE 46

Hey, so my computer has been BSODing for about 2 months now and I can't figure out why. The Blue Screen View always displays ntkrnlpa.exe as one of the crash addresses but even after research, I can't figure out what to do or exactly what is causing it, as I know that's a Windows kernel. I don't really know what changed back when it started or what drivers were installed at that time. I originally thought it was an external harddrive I got around that time but I think I bought that after the problems started and I've now noticed that the computer crashes even when the HD's not plugged in. It crashes even when I leave my computer on over night. Here's the Minidump log from the past 2 months:
==================================================
Dump File : 101911-23618-01.dmp
Crash Time : 10/19/2011 6:43:34 AM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 0x82dfffe4
Parameter 2 : 0x00000002
Parameter 3 : 0x00000001
Parameter 4 : 0x83ae5008
Caused By Driver : ntkrnlpa.exe
Caused By Address : ntkrnlpa.exe+415db
File Description : NT Kernel & System
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.17640 (win7sp1_gdr.110622-1506)
Processor : 32-bit
Crash Address : ntkrnlpa.exe+415db
Stack Address 1 : ntkrnlpa.exe+92008
Stack Address 2 : ntkrnlpa.exe+92f59
Stack Addr... Read more

A:Getting BSOD for about 2 months now

Here's the Minidump log from the past 2 months:Hi jeeberz. Have you tried System Restore? Checked for issues with HDD and memory?Also, what rig are you having issues with?

Read other 31 answers
RELEVANCY SCORE 46

I'll start off with my specs: -

OS: Windows 7 Home Premium x64 SP1

CPU: Intel Core i5 4690K @ 3.5GHz (Replaced in Jan 2015)

RAM: 2 x 4GB sticks (replaced in March 2015)

Motherboard: ASUSTeK COMPUTER INC. Z87-A (SOCKET 1150) (Replaced in Jan 2015)

Graphics: 1023MB NVIDIA GeForce GTX 560 Ti (Came with computer in 2011)

Storage: 232GB Samsung SSD 840 EVO 250GB ATA Device (SSD)(Replaced in Aug 2014) and 298GB Western Digital WDC WD3200AAJS-22L7A0 (HDD)(Came with computer in 2011, used for storage)

PSU: Corsair CX750 (replaced in April 2015)
Had my computer sicne 2011 and it always worked perfectly. In August 2014 I upgraded to a SSD and put in a newer and better PSU as well as replacing the case. No issues with PC at all and it ran perfectly. In Jan 2015 I had some spare cash and decided to upgrade the CPU and Motherboard. I took the PC to my local shop to have them install these new components for me. They tested it and re-installed windows for me and gave it back. I live my PC on overnight sometimes and when I'd wake up in the morning I'd see that the PC had crashed and restarted. I thought nothing of it and carried on like normal. After a week or two the PC started to crash during use when I was playing a game, browsing the internet or when it was idle. The error code was always 0x000000F4.
I took it back to the shop and they took a look at it and found no errors so they gave it back. As soon as I brought it back it started to crash again so I went on... Read more

A:BSOD for 6 months - 7A and F4

Zip a couple of the dumps into a single zip file then attach them to a reply.
You have to be using "Go Advanced" not "Post Quick Reply" button
 

Read other 7 answers
RELEVANCY SCORE 46

For a while I had no trace of BSOD (since 30 July). After a while (few months) it occurs again, today for four times I get BSOD. I made a rar file of the minidump files. I think maybe the problem is the video card, but I don't know for sure, please help somebody, blueelvis, I hope you can help me again. Thanks all for now.

A:BSOD again after a few months...

Yes, the video card drivers are the issue here. Please follow these instructions: atikmdag.sys error BSOD on startup [Solved] - Graphics Cards - Graphics & Displays

Read other answers
RELEVANCY SCORE 45.6
RELEVANCY SCORE 45.6

I can't start my computer as the power button doesn't work when I plug it on charge it shows the red button what can I do to start my computer 

Read other answers
RELEVANCY SCORE 45.6

I really need help with my 4 moths old laptop which has a very loud sound that it really bothers me. The fan is too loud as if I am running a very heavy software awhile I am just using MS office! It is like this since day one I bought it. I have updated the BIOS and even disabled the option that make the fan run all the time but in vain. Any suggestion?

Read other answers
RELEVANCY SCORE 45.6

Hello, I'm new to the forum, but I have been following it for some time. I seriously hope someone will be able to help me.
Here is my problem: I bought a new ASUS laptop 3 months ago, and it was all okay until it started to shut down on its own ( about a month ago). I tried resetting Windows, updating etc then I replaced my hdd because a software diagnostics tool reported that there were bad sectors. I could also hear strange noises. I read that manhandling the laptop while it is running could damage the delicate workings of the hdd, and I had done that sometimes. Everything was fine for almost a week, then the computer started shutting down on its own again. It happened while I was working , keeping multiple programs open (twice, hours after turning it on) and while I was watching a video (10-15 min later). However, today was not the first time I watched a video, so the issue is new. It seems like it is gradually worsening. After it shut down, I tried to power it back on, but it wouldn't boot. The LEDs didn't even turn on, unless it was plugged in. When i unplugged the charger it shut down again immediately. After 3 minutes I removed the external power supply, and it kept running.

I have already updated the BIOS firmware to the last version, but it obviously didn't work.
ASUS PC Diagnostics tells me that the CMOS pattern test failed, I looked up possible solutions, but I wanted to ask before doing anything stupid.
I am pretty sure it isn't a heat ... Read more

Read other answers
RELEVANCY SCORE 45.6

I have a white light by the power cord.I haven't used laptop in months.When I power it up only a yellow light comes on for about a minute and goes off and the screen is black.Laptop only about 2 years old.Never use it use my smart phone.Getting catv installed

Read other answers
RELEVANCY SCORE 45.6

My left button of the touchpad is displaced, didn't press it hard for it to happen, the hinges that connect the screen to the body makes noises when I tilt screen, my touchpad is not so responsive and I take care of my laptop very good, never dropped it or hit it. Can I return it?

Read other answers
RELEVANCY SCORE 45.6

Hi all, hoping somebody can offer some advice.

About 9 months ago I purchased a new laptop, an Acer V5-571 (i3 1.4Ghz, 6GB RAM, 750GB HDD and Windows 8) It's nothing special and was never intended to be. I only use it for web browsing, e-mail, IM, Word and maybe watching some videos on YouTube.

In fact in the 9 months I've had it, I've not attempted to play one even slightly intensive game on it, as I think I killed my previous laptop in its early days by attempting to do this.

Anyway the problem is it has become very noisy, fan wise. When I first had the laptop (and for the first 6-7 months) it was silent for the majority of the time, even when browsing the web.

Now the fan can always be heard when I have a browser open or whatever. The only way it silences is if I close every application and just leave it at the Windows desktop for a while (or if I turn it off!)

I know dust build up can occur but I've had a look through the vent and can't notice anything untoward. Although I appreciate it may be hard to see from the outside, I don't really want to be opening the case yet.

I was wondering if this was normal for a laptop in this age range? My previous laptop, another Acer, didn't start getting noisy constantly until the end of its days (and that was in it's 4th-5th year)

It's just frustrating that the fan can always be heard even when doing very little in Windows. I also can't see any rogue processes taking up resources.

I've changed my laptop habits a lot since thi... Read more

A:Acer V5-571 laptop - 9 months old yet becoming very noisy

Only thing I can think of at the moment is to use a program similar to CPUZ and check the temperatures at various time.check temp when first started as that should be lowest and listen to noise then use something a bit cpu intensive like a photo edit and again check temp and noise. if temp going up with little cpu action and noisy chances are it it dust. when I first cleaned mine I used a can of air duster thru the vent holes to stir dust up a bit and a vac to suck it out. Hold with vent holes downwards.

Only other way is to get a set of headphones and play your favourite track at max volume

Keith

Read other 2 answers
RELEVANCY SCORE 45.6

Well the problem is that it is slow and i think they have some unwanted virus on there which wont leave even tho i do system recovery and many other virus protection program has told me there was no errors.I cant reboot bc my dvd drive wont work it stills open but the light.The only time my computer work finely is after a update or recovery.Please help me with this problem?My computer is a acer extensa 5620 and has windows vista.

A:Hello everybody for the past two months i been having problem with my laptop

Quote:




my dvd drive wont work it stills open but the light




I'm not sure what you mean by this?
What is the make and model of your computer? You may have a Recovery Partition on your computer. If you start up your computer, you may have a quick message over the logo that says Press (key) to Enter Recovery, sometimes this is F11. If so, this will set your computer back to Factory Defaults. This will remove all personal data, so backup first.
If you do not have a recovery partition, then read up on the link in my signature PC Running Slow? And try those things.

Read other 1 answers
RELEVANCY SCORE 45.6

My laptop suddenly stopped charging when plugged in, and only charges when it is switched off. Also the space bar stopped functioning. I bought it 9 months back and it's still under the warranty period., but they said they will be able to fix the space bar problem only and not the charging problem and for that I would have to pay up. And the charging port that they would change would be under warranty only for 2 months, which means as per HP service center it could stop working again!!!!. I'm a doctor and I live alone. I've hardly used my laptop and no one else uses my laptop. I read somewhere that this was a problem faced by many people using HP laptops. This could be a manufacturing defect. I don't think I should be charged for hardly using my HP laptop that has an inherent defect. You are looting your customers. Kindly revert back.

Read other answers
RELEVANCY SCORE 45.6

Dear all ..

yesterday night i faced with a very unsual problem. i installed Nokia PC suite Version 5.1 and was browsing through polyphonic ringtones on my laptop.. suddenly my laptop got stuck including the music. Though i could move the cursor using my touchpad i was not able to function the left and right buttons.

i reset the machine using the power button but the windows XP OS stopped functioning fully. As soon as i pass the Bios screen nothing happens, i can see that RAM is busy but the windows XP is not loading..

i really dont know what went wrong so i badly need your help on this.

i feel the problem moght be the following
1.Windows OS got Corrupted
2.Harddisk is not responding.

looking forward all kind of solutions

Thx
 

A:3 months old laptop stopped functioning

Can you boot into safe mode? Press F8 several times before it gets to the point it hangs.
If you can make it into safe mode you can try a system restore.
 

Read other 1 answers
RELEVANCY SCORE 45.6

Hi Moderators:

I've been having a BSOD problem with my Dell Studio540 desktop for months now and finally have some time to try and fix the problem.
It's my main computer and I use for business as well as personal.

Per "JCGRIFF2"'s instructions on BSOD posting, here are the answers to his questions on my specific system:

? OS - Vista/ Windows 7 ? Windows7 SP1
? x86 (32-bit) or x64 ? X64
? What was original installed OS on system? Vista Home Premium 64bit SP1
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM
? Age of system (hardware) 4-1/4 yrs (Mfgr.Date: 11/11/2008)
? Age of OS installation - have you re-installed the OS? Approx. 2-1/2 yrs. (reinstall in 2010)
? CPU INTEL Core2 Quad CPU Q8200
? Video Card ATI Radeon HD3450
? MotherBoard Dell 0M017G Ver.A00
? Power Supply - brand & wattage Dell G739T 350 Watt PSU (Factory Replacement, 11/1/2012)
? System Manufacturer Dell
? Exact model number (if laptop, check label on bottom) DCMA (Studio 540)

Additionally, I am attaching the required zip file with the results of the BSOD File Collection app and the results of the "PERFMON" report; all zipped up in 1 folder (see file attachment below).

I am computer literate and have been repairing and building my own computers for many years. But, I am limited on money at the moment, so I need to try and pinpoint whether it's a fixable software problem (drivers) or a hardware replacemen... Read more

A:DAILY BSOD's FOR MONTHS-PLS. HELP!!

It is always great to help a knowledgeable user such as yourself.

I do notice some software installed that I would not recommend for repairing Windows problems. 3rd party driver finding utilities and tweaking software can be hazardous to the operating system and the software installed on the operating system.The Assumptions You Make About Your Slow PC (and Why They're Probably Wrong)


Recommendations:The most recent crash blames Norton, but earlier crashes all point to sptd.sys as the cause, which is very common, especially given that yours is three years old.

Please remove any CD/DVD virtualization software, such as Daemon Tools/Alcohol 120%, as they use a driver called sptd.sys that is known to cause BSODs. Use add/remove programs to remove the software. After removing the software, use the sptd.sys uninstaller to remove sptd.sys from the system by choosing to uninstall the software through the installer utility.sptd.sys Sun Oct 11 14:55:14 2009 (4AD24632)
SCSI Pass Through Direct Host - Daemon Tools (known BSOD issues with Win7)
http://www.carrona.org/drivers/driver.php?id=sptd.sys
If that does not fix the crashes, try removing Norton and replacing it with Microsoft Security Essentials.Download and run the Norton Removal Tool to uninstall your Norton product

Microsoft Security Essentials - Microsoft Windows
Outdated and Problematic Drivers:You should update/replace/remove the following drivers. Any drivers that are known to cause BSODs... Read more

Read other 1 answers
RELEVANCY SCORE 45.6

So I have been having random bsods every 5 to 12 hours for the past week before this week it's been about every two or three days most of the time after the computer crashes even though it says that it is writing a memory dump when I go to look for it, it's not there so I can't find out what is wrong I have noticed that ntsokrnl.exe is a reaccurring error when it does write a dump I've had many many different errors I have had DRIVER_IRQL_LESS_THAN_OR_EQUAL_TO I've also had NTFS_FILE_SYSTEM I'll start listing them from now on and updating the forum post any help will be useful I have also replaced my memory done mem checks did a disk check reinstalled windows multiple times I'm at a complete loss here is the one dump I have been able to get

A:Random BSOD about a four months now

Analysis:It is difficult to find patterns with only one .dmp file. Yours indicates a hardware issue, which is consistent with the information you have supplied.

You do not say how you did a memory or hard disk check. If you used Memtest86+, you may need to let it run for more passes or run it again to check for errors. It does not always find errors on the first set of passes or if not enough passes were run. Further reading: Finicky RAM.
Run some hardware checks.If you are overclocking any hardware, please stop.

If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

Run all but the advanced tests with SeaTools for HDDs.SeaTools for Windows

SeaTools for DOS
Monitor temperatures during the following tests. Use the following programs to monitor the temperatures. Real Temp is a good CPU temperature monitor.
Speccy - System Information - Free Download will monitor all hardware temperatures.
HWiNFO, HWiNFO32 & HWiNFO64 - Hardware Information and Analysis Tools can be inaccurate for CPU temperatures, but is a good program for GPU temperature monitoring.
Use FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net to test the graphics card GPU. Let i... Read more

Read other 9 answers
RELEVANCY SCORE 45.6

I have been getting random restarts and BSOD for 2 months, but in the last 2 weeks it has been fine. It just started again today and this time i decided to post it up. I have run memory diognostics tools and so problems there.

It restarts very randomly so i cant even be specific, however i have deleted previous(very old) dump files but i do have some of the recent ones.

Laptop:
toshiba satellite A500-17X
Processor - Intel Core 2 Duo P7450 - 2.13 GHz
2nd level cache : 3 MB
RAM - 4 GB (DDR3 RAM)
Hard Drive - 500 GB
Operating System - Microsoft Windows 7 Home Premium 64-bit Edition
Optical Drive - DVD?RW (?R DL) / DVD-RAM
Graphics - NVIDIA GeForce GT 230M
Additional info: I have bought it 1 year ago

Thanks for any help

A:Many BSOD and restarts for 2 months

Hi,
Your dumps bugcheck:
0x50 = This indicates that invalid system memory has been referenced.
0x3b = This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
0xa = This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
0x7f_8 = indicates that the Intel CPU generated a trap and the kernel failed to catch this trap.
Start with remove Avast and replace it with MSE.
Reinstall your VLC player since there are lot errors reported on WER. (update to newer version if any).

Update these drivers:
adfs.SYS --> adobe software
nvhda64v.sys --> nVidia HDMI Audio Device (nForce chipset driver)
Rt64win7.sys --> Realtek NIC

If the problem persist , test your RAM with memtest86 at least 7 passes.
RAM - Test with Memtest86+

Log

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff80004773b1f, fffff8800886cc70, 0}

Probably caused by : memory_corruption ( nt!MiIdentifyPfn+26f )

Followup: MachineOwner
---------
****... Read more

Read other 7 answers
RELEVANCY SCORE 45.6

I am working on a friend's system which is a Gateway sx2841. It has been having random BSODs and it is referencing ntoskrnl.exe. It has Windows 7 Home Premium OEM and 6GBs of ram that seems to be testing fine as far as I know. I am also attaching the reports if someone could please look at them. Thank you.

A:BSOD on system that is less than 6 months old

  
Quote: Originally Posted by bodya04


I am working on a friend's system which is a Gateway sx2841. It has been having random BSODs and it is referencing ntoskrnl.exe. It has Windows 7 Home Premium OEM and 6GBs of ram that seems to be testing fine as far as I know. I am also attaching the reports if someone could please look at them. Thank you.



The logs report a disk hardware issue. Please run checkdisk to confirm it.

A- CHKDSK /R /F:

Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.

Do this for each hard drive on your system.

When it tells you it can't do it right now - and asks you if you'd like to do it at the next reboot - answer Y (for Yes) and press Enter.

Then reboot and let the test run.

It may take a while for it to run, but keep an occasional eye on it to see if it generates any errors.

See "CHKDSK LogFile" below in order to check the results of the test.
B- Elevated Command Prompt:

Go to Start and type in "cmd.exe" (without the quotes)

At the top of the Search Box, right click on Cmd.exe and select "Run as administrator"
C-CHKDSK LogFile:

Go to Start and type in "eventvwr.msc" (without the quotes) and press Enter

Expand the Windows logs heading, then select the Application log file entry.

Double click on the Source column header.

Scroll down the list until you find the Chkdsk entry (wininit for Win7) (winlogon for XP).

Copy/paste the result... Read more

Read other 2 answers
RELEVANCY SCORE 45.6

Hello everyone,

So, I built a PC last year and it has been running (relatively) fine for most of the time. However, about 2 months ago (around the time I bought a new video card) I began getting BSOD. Most of the time, I get these crashes while playing games. Specifically, it would often crash when I was playing Star Wars: The Old Republic.

Yesterday, I updated my video card drivers, and today I got 2 BSODs withing roughly 2 hours of playing games online. This is the most frequent amount of BSODs I have seen since building the PC, and I believe now they must be driver related.

A few weeks ago I downloaded a program called BlueScreenView to keep track of the BSOD error codes. Checking out the codes I see 3 different errors so I'm not sure if they are all interrelated or what. I'll copy/past the error codes at the bottom of this post. If anybody has any ideas for me, I'd really appreciate it.

042112-30544-01.dmp 4/21/2012 5:47:04 PM IRQL_NOT_LESS_OR_EQUAL 0x0000000a 00000000`00000008 00000000`00000002 00000000`00000001 fffff800`02ce7722 ntoskrnl.exe ntoskrnl.exe+7cd40 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.17727 (win7sp1_gdr.111118-2330) x64 ntoskrnl.exe+7cd40 C:\Windows\Minidump\042112-30544-01.dmp 6 15 7601 275,864

042112-59607-01.dmp 4/21/2012 4:16:37 PM DRIVER_VERIFIER_DETECTED_VIOLATION 0x000000c4 00000000`00000091 00000000`00000001 fffffa80`0aaa4600 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+7cd40... Read more

A:Multiple BSOD over the last few months

Read other 13 answers
RELEVANCY SCORE 45.6

I keep getting BSOD`s for like 2 months now every 1-6hours(random)
Some text on the screen I could remember:
Driver_IRQL_Not_Less_Or_Equal
Page_fault_in_Nonpaged_Area
Memory management


Things i did to fix this problem:
update drivers
uninstall/reinstall almost everything
using recovery
Unplugged RAM sticks (4)

PC stats:


Minidumps:
Minidump.rar - 2.1 MB
 

A:BSOD for ~2 months on Vista!

Do not spam the forum with crap just to raise your post count. I have deleted all of your spam posts, and doing so again could result in a ban for deliberate spamming.
 

Read other 6 answers
RELEVANCY SCORE 45.6

hello guys ! \
i am new here , but i have always read threads trying to slove my problem
this time , i decided to post a thread myself
i have been having bsod for 3 months now
i have tried everything checked my ram , replaced my PSU , installed winows 8 then 8.1 then 7 32 bit
then again windows 7 X64

here's every thing i could find :

BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050033
BCP3: 00000000000406F8
BCP4: FFFFF800030E0EF6
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

files that helps :

C:\Windows\Minidump\030115-18314-01.dmp
C:\Users\Admin\AppData\Local\Temp\WER-45770-0.sysdata.xml

and this is the zip file :
Attachment 351169

please help :"(

A:BSOD for 3 months BCCode: 7f

Code:
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050033
Arg3: 00000000000406f8
Arg4: fffff800030e0ef6
There are two common cause of a double fault.
A driver causing stack overflow; and
A hardware issue.
First let us check for the drivers. enable Driver Verifier to monitor the drivers. Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



&nbs... Read more

Read other 9 answers