Over 1 million tech questions and answers.

"Press any key to boot from CD" does not respond to Keyboard

Q: "Press any key to boot from CD" does not respond to Keyboard

Hello,

I am having the most peculiar issue.
My computer responds just fine to my PS2 keyboard durring the Post as well as BIOS. But as soon as I try to install windows and the "press any key to boot from CD" dialog comes up my computer refuses to respond to keyboard commands (the 3 periods appear and it states that it can not boot).

I tried multiple Keyboards all the same issue.

You help is so much appreciated,
- Erik

RELEVANCY SCORE 200
Preferred Solution: "Press any key to boot from CD" does not respond to Keyboard

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: "Press any key to boot from CD" does not respond to Keyboard

Create boot disks, floppies. Thats how I get around issues like that, with
xp, and 2000. Takes six floppy discs.

Read other 2 answers
RELEVANCY SCORE 112.4

Ok so originally my computer had a problem booting up, it kept restarting saying bad boot.ini

I just wanted to back up and reinstall so i put in another HD with vista and took ownership of some files to copy. But later I tried to repair xp with an xp cd but endded up installing another instance of it ><

now it wont listen to any keys and just boots straight into the new install of xp

what can i do????

A:"press any key to boot from cd" does not respond to any keys! Please help!

disable the HDD which u want to install to (in the bios pririty disable the HDD)
than use the O.S disk and good luck suppose to work after the installation boot dont forget to change back and enable the HDD

Read other 1 answers
RELEVANCY SCORE 90.8

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

Read other 6 answers
RELEVANCY SCORE 90.4

my pc is acting up, it has been working fine for over a year now. i have an asus a8n5x mb amd x2 4200+ an ATI x1900xtx 3 GB RAM and a Raptor hard drive. when i went to turn on my computer a couple days ago i turned it on and it is like frozen at the screen "press delete to enter bios" and my keyboard wont work . its like the keys i hit dont have any effect.

please help asap
pwnage_07 thanks
 

A:Computer frozen at the screen "press delete to enter bios" and my keyboard wont work

do you have a USB keyboard or a PS/2 one?
 

Read other 4 answers
RELEVANCY SCORE 90

When we press s on keyboard we get snip and sketch tool and i cant type letter s which is very annoying,
please let me know how can i disable this ? already i have uninstalled still problem persists

Read other answers
RELEVANCY SCORE 90

I am currently unable to start one of my desktop machines.

Although a working keyboard is connected, the error message "Keyboard Error. Press F1 to resume" is displayed on startup. Pressing F1 starts the XP Pro splash screen but startup does not complete- it simply returns to the error message. I have tried starting in safe mode but same story.

This error occurs even when starting with no keyboard connected.

Background info - old machine - AMD Athlon 600MhZ, 192MB. No recent changes to hardware build. Recently this same machine has been displaying the message "ATAPI Incompatable; Press F1 to Resume" on startup- in which case pressing F1 solved problem.

Do you think my hardware is failing? Any suggestions please???
 

A:"Keyboard Error: Press F1 to resume"

Keyboard controller on the motherboard could be defective. If it is defective you meed a new motherboard. Can you access the BIOS once the keyboard is plugged in?
 

Read other 2 answers
RELEVANCY SCORE 88.8

So, I'm using a burnt CD-R of windows XP w/ SP 2 I downloaded from MSDNAA. This is actually the second copy burnt from the same iso. I'm running Ubuntu Gutsy Gibbon, so that's on the MBR, and there is about 50 gigs of unpartitioned space sitting on the primary hard drive. My combo drive is IDE, my hard drive is SATA, and my motherboard uses the P35 chipset.

Now, to the actual problem. I pop in the disk, set the first boot device to be the optical drive, it gets to the "Press any key to boot from CD...." message. I press a key. Nothing happens. A few details on what exactly "nothing" is: In contrast to when you don't press any key, no more trailing .'s occur. However, the cursor keeps blinking, so the system is totally hung. But there are no noises, nothing new pops up on the screen, etc. Nothing happens.

I'm thinking the ISO may be bad (though I did directly download it from microsoft), but I've also heard of people unable to install specific versions of windows from not being able to boot from the CD under similar conditions.
Anyway, any help you could provide would be very much appreciated.
 

A:"Press Any Key To Boot From CD" Hangs when I press a key

How did you manage a direct download from MSDN of XP?
 

Read other 1 answers
RELEVANCY SCORE 87.2

Hello everyone, wasn't really sure where to post this but since I'm trying to install windows 7 here I am. A while back my hard drive died, it said a partition was corrupt. I was having problems with the computer locking up during the recovery console at the time. So I bought a new hard drive and plugged it in, all I got was a black screen with a flashing cursor, I tried installing windows 7 on it with a retail disc and it locks up at the "press any key to boot from cd or dvd" screen. When that didnt work I placed the hard drive in another computer that I'm borrowing and it installed just fine, so I reformatted it and put it back in my computer, along with the optical drive from the loaner comp. just to make sure it wasn't my optical drive failing. Still the same thing. Ive tried installing windows xp on it, locks up on a blue screen that says windows xp install and nothing else. Ive made sure all the cables are connected. Ive tested the psu with a multimeter and get the correct voltages out of it. I tried running memtest86+ and it freezes it at test 7, and when I tested I used one stick of the two ram sticks that I have. when I go into bios and mess with any of the settings it locks up when I try to save and exit. Ive tried resetting the cmos that didnt help the problem. Ive tried setting the cd drive to boot in the boot option screen, that doesnt seem to do anything to fix it. Ive taken the ram out and started the computer to see if I get a bee... Read more

A:Can't install windows, computer freezes at "press any key to boot from CD/DVD"

All stock except the psu ? You mean it's failed before? Looks like it's failed again then....any time some component fails twice is the time to start looking for why ?......
 

Read other 3 answers
RELEVANCY SCORE 87.2

recently installed windows 7 on an old Gateway 510 x. Wanted to put XP Pro back on it so went ahead booted from disk, formatted, the computer restarted as usual to complete installation but never made it past "press any key to boot from disk...". I let it sit for like an hour (even though I knew time wouldn't help). What could be the problem? I read somewhere about pressing F6 when the XP cd first loads to install SATA/RAID drivers but my drives are IDE. Also if I do try to "press any key" after the formatting has finished and the computer restarts nothing happens. The only fix i've found is to put in the windows 7 dvd I have and reformat with it - then reboot with xp disk. Then when I push "any key" to boot from disk the usual XP setup dialog blue screen comes up. Anyone have any ideas? I've googled my brains out trying to get an answer so this is my last resort.
 

A:XP installation hangs "press any key to boot from disk...." forever

The only thing I can think of is a bad XP Install disk although it will boot when you first install which is the only time you should "press any key".. Other than that it could be something with your keyboard not being sensed at that time, try a different keyboard. Problems like this are sometimes only solved by process of elimination.
 

Read other 19 answers
RELEVANCY SCORE 87.2

So today my computer was turned on and said the above and not do anything but sometimes it would get on to chrome and shortly there after freeze.
 

Read other answers
RELEVANCY SCORE 87.2

I tried formatting my hard drive using the provided software from the company I bought the computer from, but it did not install correctly. Now there is no Windows or any files of Windows showing up on my hard drive whatsoever.

Whenever I pop in the Windows CD to try and repair or re-install, I get an error that states "Disk Boot Sector is to be modified! Press Y to continue, any key to abort" and once I do, it seems like the Windows options are about to come up, but then it just shuts down my computer. Any thoughts or possible fixes? I'm not sure of the correct location for this thread so I put it here. Thanks in advance!

A:ERROR: "Disk Boot Sector is to be modified! Press Y to continue" then crash?

I'd try a bootable hard drive diagnostic that's available from the support website of the manufacturer of your hard drive. That'll let you know if the hard drive is failing and we can move on from there.

Read other 2 answers
RELEVANCY SCORE 87.2

This error happens every time I try to boot my PC.

First sign of something going wrong was the wireless internet not connecting to any network, after rigorously scanning fr viruses there was a trojan my anti-virus software could not get rid of. Occasionally, my system starts up if I'm lucky, but having this problem I have left my PC off for quite some time, came back to it today and it turned on fine although being very slow. Also, when the computer starts it makes a little beep noise but being on the desktop it kept repeating the noise over and over as if it was stuck in a loop, then after around 5 minutes the blue screen error message came up, after this it just keeps displaying the disc boot failure message.

I have no idea how to fix this as I am no computer boffin, any help would be highly appreciated!

Thanks, Sam.

p.s im using a different computer to the one im trying to fix if this isnt already obvious
 

A:"Disk boot failure, insert system disc and press Enter"

Read other 16 answers
RELEVANCY SCORE 86.8

Hi there!

One of our CPUs and monitor gave up most of the ghost. I monitor is hosed, I tested so that is no biggie... But the CPU says that the CPU fan is not running, press F2 to continue boot or it will shut down in 5 seconds.
If I press F2, it boots fine. I have a new HD in the CPU because my boss REALLY needed his computer and I had a spare. So he is set, but I am still dealing with his old one. I have checked the fans on the PS and the MB. BOTH are working. So am I missing something? It is a HP pc 864n Media center.

Thanks!
 

A:Error message "CPU Fan is not working" On boot. Press F2 to boot...

It could be that the CPU fan is connected directly to the PSU rather then on the CPU_FAN connector on the motherboard &/or the CPU fan is spinning at such a low RPM level that the motherboard cannot detect it.

If the CPU fan is spinning & the temps are decent, then you shouldn't worry.
 

Read other 3 answers
RELEVANCY SCORE 86.8

I'm trying to reformat the hard drive on our 2nd computer, and I have properly changed (and saved) the BIOS settings for Boot priority to "CD/DVD". In fact, I disabled all other choices for 2nd and 3rd priorities, etc. All the tech support/instruction articles I've found tell me I've succeeded here if I get the line "Press any key to boot from CD", which I have. However, when I press a key, in a moment it starts Windows up just like always, instead of giving me the blue screen.

The CD seems fine. I checked it from within windows, and the computer reads it correctly, and when I click on Setup, it brings up the menu of installation options, just like I want it to from the blue screen. Its just that I can't get to that point after the "Press any key..." part in the boot process.

What am I missing here?

Thanks!

Darren
 

A:"Press any key to boot from CD" then still goes to Windows instead of blue screen..??

Read other 16 answers
RELEVANCY SCORE 86.8

Ok, I built a system for my oldest daughter based on the take offs of my own upgrades. A MSI Kt4AV mobo is now her mobo. The odd thing now when booting is it asks EVERY time on boot, to press the space bar as the case has been opened. I had opened and closed my case a gazillion times during my time with this mobo and never got this message. It's a new case but essentially it is my entire old system, never happend once to, happens EVERY time with hers. If you don't hit the space bar within 3 secs of boot, it "hangs" on that screen and you have to reset it. Any ideas, I've looked through the CMOS and see no on/off for this option. Just annoying, not a major issue.
 

A:"case opened, press spacebar" on boot ?!?!

Some cases have a small switch, located somewhere around the side panel. This switch gets activated when the side panel is closed. If the side panel is not activating the switch, it will send a signal to the mobo, saying the side panel is open. A small cable goes from the switch to the mobo headers. It is possible that this switch has gone bad.

If this is the case with your`s. Simple unplugging the wire from the mobo should stop it.

If that`s not the case, then I`m out of ideas.

Regards Howard
 

Read other 1 answers
RELEVANCY SCORE 86.8

Hi

I?ve had this problem for a while now? When I turn my PC on, it comes to a black screen saying ?MBR Error 1 - Press any key to boot from floppy?. For months it was not much bother as within a few hits of the reset button Windows would load. But then it got to a stage where I?d have to hit the reset button more and more. So for the last few months I?ve just been keeping my PC on?.

?. I went on holiday in October and switched off while away. It took several hours of hitting the reset to get Windows to load. Then, a few weeks back, I stupidly switched my PC off by accident. This time it took a whole 24 hours to get Windows to load! I reckon at least 300-400 reset presses!

Anyhow, I?m using this as a calling to update to a more modern OS. But seeing as I have got spare hard drives, I would quite like to keep my current OS as is in case I need to come back to it for whatever reason. So I wondered if anyone knows how to fix my problem?

I did try some stuff a while back but none of it worked. This included FIXMBR and FIXBOOT. I?ve got screenshots from the time if they might help? I?ve also got a BSOD from around the time and another screen with various ISOLINUX messages. My memory is hazy as to what I did exactly though.

One other thing? When I went through the 24 hour resets, I went in to BIOS a few times and the OS system HD was not showing in BIOS. TBH, I thought it was dead. I knew it worked mechanically because I could hear it. But I must admit... Read more

Read other answers
RELEVANCY SCORE 86.4

Wow,

So I did some work on this machine not too long ago. It had basically lost one hard drive in a raid 0 setup during a power surge, and this poor fellow lost all his data. I tried to talk him into upgrading to a third drive for future situations like this, but now not even two weeks later, when he boots, we get to a screen that says

a disk read error occurred
press ctrl alt del to restart

A browse through these wonderful forums is telling me that his hard drive, or at least the partition on 1 of the drives is toast, which would be disastrous at this point. So I am truly hoping for another solution. Yes the machine is running Raid 0. When I boot the machine I get to the intel boot agent screen with the option to enter the setup menu (this is not the bios, just a boot agent something or other where you can tell the machine to boot according to the bios ect) Following that, the screen goes blank, the super micro graphic screen comes up just briefly and then bam, this good old message appears, so there does not even appear to be a way to get into the bios.

I am desreate for advice... If I must resinstall windows, then so be it, but we are talking thousands of dollars worth of data, that would be lost. Please please help!
 

A:Raid 0, Boot prob, "A disk read error occurred" press ctrl alt del to restart

Try hitting del continuously when booting to see if you can get into the bios, then see what drives in the raid array are recognized.
 

Read other 3 answers
RELEVANCY SCORE 86

I dropped my laptop while it was on

after restarting, it only said "Please Wait.."

I tried installing a new hard drive
now, my fan gets really loud, then stops, and I get a screen saying, "All boot options are tried. Press <F4> key to recover."

pressing <F4> only restarts the computer, giving me same instructions.

I've tried booting from a windows 7 CD and USB, but I just get the same message :/

Thanks for any and all help!!!

A:"All boot options are tried. Press <F4> key to recover..."

Hi, first thing to do after a fall is to remove the battery, you can then try to boot from the mains only, you say you replaced the HDD, this would require you reinstall windows on this HDD, why did you do that? It is most likely a fall could have damaged connections the RAM seat would be first, it is important, did you remove the battery before replacing the hdd, as I said this is the first thing you should do.

Read other 5 answers
RELEVANCY SCORE 86

Hi.

Im currentling installing XP on my laptop. When i insert the CD into my laptop , the "Press any key to boot from CD.." pops up. When i do so, it freezes exactly on the spot. Ive waited almost an hour for anything to show but its just the "Press any key to boot from CD.." thats there

Please help me out.
 

A:Windows XP Installation - " Press any key to boot from CD.."

never press any key when you see that message..so reformat again and start over..
 

Read other 2 answers
RELEVANCY SCORE 86

Hi all, my name is Ron. I have exhustively searched the Windows 7 Forum, and many other internet sites, for a solution or explanation for my dilemmas to no avail.

I've been working with computers since 1967, when we had to wire the IBM boards by hand and use punch cards. I write Basic and bat files. I'm not a novice, nor an expert. I've never had such problems with Windows software (Win95, 98, 98SE, WinMe, XP) as I have experienced now with Windows 7 Professional. Just sneeze wrong and if fouls up. I have multiple-stage full backup images for recovery (which I have already had to use 3 times).

Note: There is not a Win7 installation problem. Win7 is installed and boots and runs just fine (except for all the bloat).

Windows 7 Professional 64 bit SP1 problem: the "press any key to boot from CD or DVD" does not always appear at bootup. BIOS is the latest version and is set to boot 1st from CD/DVD, then USB CD/DVD, USB HD, internal HD (OS). BIOS is also set to AHCI SATA mode.

I have run the Win7 Repair Disk - Startup Recovery Repair 3+ times, no error. Memory test is OK.

Equipment:
Dell Alienware Aurora-R4 ACPI x64 based PC
Intel Core i7-3820 (Quad Core, 10MB Cache) @3.6Ghz
16GB Quad Channel DDR3 at 1600MHz RAM
1 - Seagate Barracuda 1TB SATA 6Gb/s (7,200RPM) 32MB Cache (Not RAID)
1 - Seagate Barracuda 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s
1GB GDDR5 AMD Radeon HD 6870 (video card)
Creative Sound Blaster X-Fi Titanium (sound card)
1 - DVD-RW
1 - DVD... Read more

A:"press any key to boot from CD or DVD" doesn't always appear at bootup

  
Quote: Originally Posted by RCM


Windows 7 Professional 64 bit SP1 problem: the "press any key to boot from CD or DVD" does not always appear at bootup.


How frequent is the problem. 75% of the time it doesn't show, or 10% of the time it doesn't show.








  
Quote: Originally Posted by RCM


Problem/question #2:
Should Drive(1) also be formatted as GPT Type, instead of MBR Type?


I wouldn't think so. I've yet to use a GPT style partition table yet.










  
Quote: Originally Posted by RCM


Question #3:
How do I go about moving/setting the pagefile (swap file) onto another partition? Is there a 'Registry' entry to change/add?


Right click My Computer, Properties, Advanced System Settings, under Advanced tab, choose Settings from Performance, click on Advanced. Go to the Paging File section. Click on Change. Set however you like.









  
Quote: Originally Posted by RCM


Note: before anyone says anything about moving the swap file, I already understand all of the arguments about putting it on the same HD. I'm putting it there to reduce backup image size and reduce fragmentation. I'm not a gamer.


Run it wherever you see fit. I don't leave mine on my SSD because of limited space. I moved my page file to my mechanical drive. It... Read more

Read other 9 answers
RELEVANCY SCORE 86

I've tried several times to install Windows XP now on a new Maxtor drive bought just the other day. When I have the disc in, it loads to the blue install screen without asking me to press a key to boot from cd, I choose to install, partition the drive and format. It copies the files and then restarts, but when it loads again it still doesn't ask for me to press a key (which you aren't supposed to press the second time), and it loads back to the first menu, where I can start all over again. Any help?
 

A:No "Press any key to boot from CD" message when installing XP Pro

Read other 8 answers
RELEVANCY SCORE 86

Hi good day. I am trying to install windows 7 and the option to press any key to boot from disc is not showing. Its an i7 920, 14gigs ram and gtx 760 msi card. I tried switching out cables and roms and just before it crashed, I even put the windows setup on the hard drive to boot from to no avail. I just need this option to show so I can format and start installing.
 

A:"Press any key to boot from disc" not showing.

Its just going straight to "launch startup repair / start windows normally both of which are not working. First is attempting to system restore and not working. Second is blue screen and crash to restart. Thank you in advance.
 

Read other 1 answers
RELEVANCY SCORE 84.8

Hello,
I really need your help. I have exams coming up soon so need to get back on my computer as soon as possible. I have a notebook with windows XP. The model is Compaq mini CQ10-400.

When I switch the notebook on it displays the "BOOTMGR IS MISSING"... message. I cannot get on my computer passed that screen, apart from when I press escape after pressing Ctrl, Alt, Del. It gives me 4 options ... " F1 system information, F2 system diagnostics, F9 boot device options, F10 BIOS setup."

There is no disc drive so what should I do, and what is the easiest way to fix this issue.

Thanks in advance.
 

A:"BOOTMGR IS MISSING""PRESS Ctrl+Alt+Del to restart"

Read other 16 answers
RELEVANCY SCORE 84.8

Hello,
I really need your help. I have exams coming up soon so need to get back on my computer as soon as possible. I have a notebook with windows XP. The model is Compaq mini CQ10-400.

When I switch the notebook on it displays the "BOOTMGR IS MISSING"... message. I cannot get on my computer passed that screen, apart from when I press escape after pressing Ctrl, Alt, Del. It gives me 4 options ... " F1 system information, F2 system diagnostics, F9 boot device options, F10 BIOS setup."

There is no disc drive so what should I do, and what is the easiest way to fix this issue.

Thanks in advance.

A:"BOOTMGR IS MISSING""PRESS Ctrl+Alt+Del to restart"

Hi and Welcome to TSF!

The only way to fix this is to use startup repair from the Windows XP CD.

Read other 15 answers
RELEVANCY SCORE 84.4

Hi,

Having a problem with my firends pc. He has a Fujitsu Siemens 'Cordant' PC which was not booting up at all. I managed to fix this and install the xp home recovery disk that came with the pc. Unfortunatly he now needs XP Pro which hangs at "press any key to boot from cd" when i put it in his machine. The cd itself is in perfect working order and will boot on other computers. All hardware is fine as XP home installed fine and when i try to press enter to boot from cd, the computer makes a beeping noise - so the keyboard is recognised.

Any help greatly appreciated

Jon.
 

A:XP Pro Hangs at "press any key to boot from cd"

Read other 8 answers
RELEVANCY SCORE 84.4

My PC was acting slow lately, so I backed up my files and decided to do a clean install. I inserted my newly purchased Windows 7 Home Premium disc and deleted all partitions, and installed. Install went fine until first reboot, and the PC got stuck after Post, displaying the message "Press any key to boot from CD/DVD" Not pressing anything and letting it go through all the dots will prompt the PC to freeze, while taking the disc out or changing boot order to HD first results in a blinking cursor. I have also tried this with an XP SP2 disc and a Vista Ultimate disc, same problem.

The thing is, I can install Linux Mint, Ubuntu, or any other Linux distro just fine. The only problems are with Windows.

Any help, or is this PC done for Windows?

A:PC Stuck on "Press any Key to boot to CD/DVD"

Are you pressing any key when prompted to by the Windows disc?

If you can run Ubuntu from a Live CD, use GParted to check if the HDD has any errors.

Read other 9 answers
RELEVANCY SCORE 84.4

So i got a laptop with a windows 8.1 trail version on it because i wanted to install my own copy of windows 7 (not from the manufacturer) to save afew dollars. So i had to go into the UEFI and change it to legacy boot mode in order to be able to boot from another source. Everything was going smoothly with my windows 7 install untill i was part way through and my CD was corrupted. So i tried burning a copy of windows 7 (not from the manufacturer) onto a dvd and retry the install which didnt work. So i went out and bought a propper windows 8.1 intall disc. When i boot up it says

"reboot and select proper boot device
or inster boot media in selected bo ot device and press any key"

so i put in the legit copy of windows 8.1 and then it just says

"press any key to boot from CD or DVD....."

at which point the keyboard becomes unresponcive. There are no prior prompts which i can go into a bios with before this. Help

A:"Press any key to boot" not working

To start with, what kind of keyboard are you using, USB or PS/2? Also, what make and year is your laptop?

Read other 1 answers
RELEVANCY SCORE 84.4

Hi,

I have recently purchased windows 7 professional and burnt the ISO image to a disc. (x64)

i've followed instructions on the internet, changed my bios settings so it boots from cd/dvdrom first then hard drive second.

ive checked my drives and it says that the cd/dvd drive is bootable.

however, when i reboot it with the disc in it doesnt display the "Press any key to boot from CD or DVD" message, just a blank screen with the flashing underscore.

it also doesnt proceed onto the hard drive boot after this, i have to restart and change my boot settings back.

i have an ASUS N50V running VISTA SP2 x32

however, a bit of background information which may be the cause (though i dont see why)

whilst away from my computer, it tried to automatically update to SP2.

it failed miserably with windows rendered 'simple' and not completely functional.

after trying many things it ended up having about 8 restarts and it was just that final restart and it suddenly was working with a message of 'SP2 successfully installed"

now it lied a bit. every now and then my computer will come up with either "H CONTROL" error or "Host Process" error and itll send it back simple, 1 or 2 restarts later, its back to normal.

im hoping there isnt some system setting stopping my computer from loadnig the disc from boot.

or is it possibly a faulty burn and i should just wait for the original disc to arrive in the mail.

A:No "Press any key to boot from CD or DVD" message.

did you burn the iso image as a image

check the disk is bootable in another computer

Read other 5 answers
RELEVANCY SCORE 83.2

Hello,

I need help with this Diskette issue please. "Diskette Drive 0 Seek Failure"
I've had this problem a few times in a couple of years and I have been able to fix the error by pressing F2 and going to the SETUP. And I've done this with no issues. But this time I thought I fixed it but now I get this new error: "A disk read error occurred Press Ctrl+Alt+Del to restart". After I press Ctrl+Alt+Del it takes me back to the same error massage "A disk read error occurred Press Ctrl+Alt+Del to restart". Need help please. This is a Dell Desktop, Windows XP.
Thank you.

Sue
 

A:"Diskette Drive 0 Seek Failure" Error Then "A disk read error occurred Press Ctrl..."

Read other 9 answers
RELEVANCY SCORE 83.2

Ok. I will list every detail of the problem and of my trials to solve it so that you could have as clear an idea as possible. Thanks in advance. I HAVE BEEN WORKING ON THIS PROBLEM FOR HOURS SO IT WOULD BE GREAAAAAAATLY APPRECIATED if anybody could help me out!

1.
I was trying to install Ubuntu, so need to boot from CD ( i know i can do that directly in windows using wubi, but that's not what I want to do. I am just trying to boot from CD and install Ubuntu on an allocation of memory i had set free for it.). I set the boot sequence to be 1.CD-ROM 2.Hard-disk 3.Removable. However, even under this settings my computer still directly goes to Windows. *:I do notice the CD-drive working at the beginning of the start-up, but then Windows comes out eventually *
2.
So I figured the problem might be the system did try to boot from CD but failed, so it then boots from harddisk and found Windows. Therefore I went into BIOS and set all 3 booting devices to be CD-ROM, then restarted. Now I have this error message : disk boot failure, insert system disk and press enter.

3.
The CD is good, because i tried to boot my laptop from it and it works well.

4.
I tried to upgrade my BIOS but couldn't because the system showed the same message when i tried to boot from the BIOS flash disk.

5. I built this desktop from scratch up, and when I first tried to install an OS to it, I used a CD and it booted well.. which is about 6 months ago. I never tried to boot it from CD since then. I ... Read more

A:cant boot from CD "disk boot failure insert system disk and press enter"

After reading through step 4 above, I don't need to go further.

Some optical drives fail in such a way as to work fine reading a disk in Windows but will not boot from a bootable disk. Replace the optical drive with a known-good one you may have access to and see what happens.
 

Read other 2 answers
RELEVANCY SCORE 82.8

Hey everyone,
        I am trying to get the REST queries to work with the sharepoint end points instead of graph end points. I first created an app with relevant permissions and have given it the admin consent. Then I am hitting the https://login.microsoftonline.com/<tenant>.onmicrosoft.com/oauth2/token?Content-Type=application/x-www-form-urlencoded end
point with https://<tenant>.sharepoint.com as resource. I am then using the access token retrieved to give the rest call to https://<tenant>.sharepoint.com/_api/v2.0/drives/b!3indYSbqZ0-hVSPnCgIZy-2xDMh7jH9AuQnEzJMc6TEfQoSJvJT-R6tT0lFBQiPr/root/delta
but it is failing with "error":{"code":"generalException","message":"General exception while processing"}}. The REST response code is 401 Unauthorized. I have filed a Microsoft support ticket but they
have asked me to post on these forms. Can someone please help me with this? I am not able to move forward because the error is pretty generic and doesn't give any additional details.
Thanks,
Sai Kiran Katuri.

Read other answers
RELEVANCY SCORE 81.6

Ok, I built a PC a month ago and everything seemed find no problems of any sort. The other night I defragmented my hard drive and shut it down and turned it on today to a memory test and the message "Disk Boot Failure, Insert system Disk and press enter"

The computer has access to the XP pro w/ sp2 disk only as a boot device but it will not recognize it now.

I have set Cd-rom as 1st for boot sequence then hard drive I have no floppy drive and the bios has been configured to know that.

I am not sure if this means anything but in the bios the IDE Channel 0 Master says none and when I try to turn on auto detection it wont detect a hard drive.

The HDD is fully connected and has not been touched since I installed it a month ago.

I have this awful feeling that I fried the HDD when I defragmented it last night.

Any help would be very much appreciated. But please be simple this is my first build and my knowledge at this sort of thing is very very sketchy at best.
 

A:Error message "Disk Boot Failure, Insert system Disk and press enter" on first build

The first thing to do would be to get a new data cable for the herd drive and see if that fixes it, they are nice and cheap nowadays.
 

Read other 4 answers
RELEVANCY SCORE 81.6

Ok first off I want to say I've searched and searched and searched to no avail in trying to find a solution to this I've come to the conclusion it's software and not hardware based. Let me start from the top.

I've had an older computer (HP Pavilion a408x) out of commission for a while due to a 'sploded psu. I finally get around to ordering one, install it and everything is good. I bring it back to my office and hook it up to the internet and as expected there's updates. So I up date it and after the updates are installed the computer restarts automatically (weird yes) and as it's coming back on it detects errors and runs CHKDSK. So I let it run and it gets to part 2 of 3. At this point in time my partner is really needing to print sometime and all computers print through this computer. So after about 45 minutes CHKDSK is still on part 2 at only 15%. So I'm like "screw it" and manually shut down and restart. It's at this point I get a "primary master hard disk failure" at the boot screen. Letting start up continue I get a "Stop : c000021 unknown hard error \systemroot \system 32 \ntdll.dll" At this point I realize something is delectably wrong.

Found this thread, which didn't help much. At some point the c000021 error stops and I start getting "disk boot failure insert system disk and press enter" and I found this thread, which didn't help much either. I have also been searching other sites as well.

Here's what I found ou... Read more

A:Hard Drive not found "disk boot failure insert system disk and press enter"

Anything would be super helpful, even if it's bad news. I just need to know if I can get this remedied or not.

Another thing I noticed is that the HDD activity light on the front of the computer does not blink or show any activity.

Thanks!

Read other 7 answers
RELEVANCY SCORE 81.6

Hello,
I just built this new computer (everything new) but when I start it up it gives me this message, and I cannot open my disc (probably not recognised?). Please help resolve this.
Btw. no operation system installed or so.

my computer:
CPU: intel i7 920
Motherboard: gigabyte GA-ex58-ud5
Sata-II hdd
+ cd writer is SATA as well

Could it be that I need to update my bios somehow? I highly doubt it's the hardware as it's all new
 

A:"disk boot failure, insert system disk and press enter" But CD-drive won't open

Read other 8 answers
RELEVANCY SCORE 81.6

I had a fresh install of 7 and everything was working fine.
All of a sudden it starts randomly freezing and programs start responding.
I got KERNAL_PAGING_ERROR BSODs etc. and got a new disk, thinking it was that.
After cloning the new disk which didn't work, and produced loads of errors on chkdsk, I decided to do a clean install of 7.

I still keep getting "Disk boot error, insert system disk and press enter", and when it does boot, it freezes all the time and every time I click the start button, it basically crashed and is messed up.

Tried new SATA cable and ports. Any ideas?
 

A:Windows 7 freezing, "Disk boot error, insert system disk and press enter"

BIOS settings or Motherboard issues?

Have you checked with the manufacturer website for the Motherboard that you have the Windows 7 drivers?

Is your Windows 7 DVD a retail copy...or the pre release BETA....or dodgy(in which case problems might lie there)
 

Read other 1 answers
RELEVANCY SCORE 81.2

Hi there,

Well, the message I get it pronounced above in the title. I know a little bit about computers, but I don't know how to get into DOS, BIOS, etc when I don't have a start menu to do so. I read some other threads and they seemed to have useful information, but I would need further explanation. Also - I hooked my HD into another computer to see if it would work, it did, booted up, everything. Also, when I went into Boot Setup or something - blue screen and the only thing I could do when hooked into my computer - it doesn't show any options for booting - it says select from the list - but how do I do that when there's nothing in the list? Oh please do help me as this computer is my main source for writing.

Thanks,
Jimmy
 

A:Problem: "Disk Boot Failurs, Insert System Disk and Press Enter"

If you're running a HP what it's asking for is your System Restore Disk. Meaning the HP OS that came with your system. Finding Bios in HP are generally simultaneously with Start button on casing F1 or F11. If neither key works then try F2 and or the Delete button. Making sure each key is pushed as you boot up.
Once your in Bios use the arrow keys to scroll up and down your bios - the enter key once on the various listing in menu until you find your boot sequence listings. In general plus and minus are used to change the sequence. CDrom HD and floppy is the correct setting. But with your Restore Disk from HP it might not even require all that.
Pop it is and Boot up and see if it works. Then try the Bios sequence if you can get there, the F10 to save and enter making sure your CD with the OS is in your CDRom when you do.
Let us know as things go...Jazz
Sounds like you've either lost your OS or you've lost your HD.
 

Read other 2 answers
RELEVANCY SCORE 81.2

Hello everyone, been lurking for a while, but first time posting because I could use some help. I tried looking through other threads, but nothing seemed to help. I was downloading a game off of Steam, and my family computer just crashed. It apparently restarted itself, and presented that disk boot error message. Tried restarting again using ctrl+alt+del, and same situation occurs. I go into the BIOS screen, and try to use the auto detect to identify the drive, but it is not identified. All of the cables are working correctly, as I plugged a different drive into them and that drive booted fine. Btw, the hard drive is a western digital 5000AAKS.

I'm running an AMD Athlon 64 Processor 3800+, 2412 MHz, 2 gb of ram, Windows Vista Home Basic. Its a Compaq SR5110NX. I'm not overclocking it or anything, just downloading a game, and then this happened. Any help would be greatly appreciated.
 

A:Another "disk boot failure insert system disk and press enter" thread

Read other 7 answers
RELEVANCY SCORE 81.2

just like the title says my HD crashed and i could not boot on the computer i put in a new HD and tried to boot it would not work. i would see the HP screen but then i would get the error. it is a 810a model and help would be extremely appreciated. and if you really know you can email me at <email removed>
 

A:Installed new HD now getting "disk boot error inset system disk & press enter"

Read other 14 answers
RELEVANCY SCORE 81.2

cp repaired fit new keyboard now i want @ i must press 2. can anyone help

A:[SOLVED] keyboard [email protected] get &quot;.

hi, if you look in control panel, region/ languages (I'm not using the xp computer at the moment so can't remember exactly how the folder is named), you should be able to change to your correct region.

Read other 3 answers
RELEVANCY SCORE 81.2

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

Read other answers
RELEVANCY SCORE 80.8

Pretty much what happened is that my powersupply got messed up one day and just turned off my computer and I couldn't boot it back up. I ordered a new PSU and I installed it but now when I boot my computer I'm getting "Disk boot failure, insert system disk and press enter". I've tried putting in the installation disc and using the recovery options but my OS isn't listed/found and if I click load drivers I can clearly see both of my hard drives. I have already checked boot options as well. I was also using GRUB before this all happened as well because I installed ubuntu as a dualboot. Any help would be greatly appreciated

A:"Disk boot failure, insert system disk and press enter"

Boot the free PW bootable disc - ( make sure NUM LOCK is on when it asks about screen resolution, then press 1, then Enter)

See what it says.

Free Download Partition Wizard

I assume both HD's are recognized by BIOS?

Read other 9 answers
RELEVANCY SCORE 80.8

System disk needed to access IBM 486 SLC2-V1/387;
66 mhz cpu clock; 640k base memory;7296k extended
memory; 5.25 & 3.5 disk system.
 

A:"Disk boot failure. Insert system disk and press enter."

Welcome to TSG

Which version of Windows are you using (win95)? Always make sure there is no floppy accidently left in the drive. Did this message just start one day or did it begin after some problem you had?
 

Read other 2 answers
RELEVANCY SCORE 80.8

New build computer, spec is as follows;

Biostar GF 7050-M2 Motherboard
AMD Athlon 64 4400 Processor
4 GB RAM
1 IDE 250GB Maxtor HD
1 IDE 200GB Maxtor HD
1 SATA Samsung 20x Dual Layer DVD-RW

Now I have assembled everything to the best of my knowledge correctly, I can boot the computer to BIOS without any problm whatsoever.

The problem is when I either try to load the motherboard driver disc, or my Windows XP disc I get this message;

"Disk boot failure, Insert system disk and press enter",
I have tried setting my disc drive to first boot device, I have even unplugged my two HDs as well, but to no avail.

My last hope is my USB flash drive, onto which I have copied the software from my motherboard driver disc.

Dores anyone have any suggestions as to how I fix this?, I will be very grateful to anyon that can give me some form of help,

thanks.
 

A:"Disk boot failure, Insert system disk and press enter"

Is there an OS already installed on the drive you are trying to boot from?
 

Read other 3 answers
RELEVANCY SCORE 80.8

Disk Boot Failure. Insert System Disk And Press Enter

Hi i have a self built Quad Phenom 9850 XP Home ed PC that wont boot, i will say now i am very much a newbie to this so sorry in advance.

When i turn it on there is a very long wait at the set-up screen (an s-series gigabyte M750SLI-DS4 board ) and when it gets to boot screen it builds the DMI pool, tell me there is a data change and to update new data to DMI! and then goes to boot, only giving me this instead "DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER"

I have not yet managed to get the computer working, the thing that gets to me the most is that less than 12 hours ago i was sat on the computer with it working fine and no errors..

AMD Phenom 9850 2.5GHZ
Gigabyte S-series M750SLI-DS4 board
4 GB RAM
Seagate 1TB HARD DRIVE.

There is alot to loose on this computer so i am very much hoping this wont be the case, Thank you in advance.

James
 

A:Disk Boot Failure. "Insert System Disk And Press Enter"

Read other 6 answers
RELEVANCY SCORE 80.8

Hi,

I'm currently running on a m2n32-SLI Deluxe WIFI edition with a 320GB maxtor harddrive. Previously, I had my set up like this: One SATA from maxtor to the mobo, one IDE cable with my cd drive, as master, and my old HD(30 GB w/ my documents) as slave. It was running fine with Vista on the maxtor. However, I wanted to remove the old HD and place a new CD-drive in. I did so, and I received the above error message.

I took out the the new CD-drive and switched back to my old connection, and it worked great.

Then, I had the 320 GB connected, and the old cd-drive to the IDE. I get the error message. I've tried every single possible combination of jumper settings and replaced the IDE cables.

What do I need to do to get this to work, before I throw my computer out the window?
 

A:"Disk Boot Failure, Insert System Disk And Press Enter"

Windows has detected the change as an attempt at piracy. You will now have to reinstall Windows in repair mode, then talk to Microsoft over the phone to get it re-established.
This is common with OEM versions of Windows. Windows will detect any change in the hardware, other than memory, as a possible attempt to bypass the Windows Install parameters... it thinks the computer has been changed.
You might want to do a thorough search of the www.microsoft.com knowlege base.
 

Read other 4 answers
RELEVANCY SCORE 80.8

Hi,

My cousin recently made me a computer and he sent it all the way here from the United States. I was eager to try it out and hooked it up to my monitor, mouse, keyboard, etc. I did not plug in any additional USB devices.

When I boot up the computer it gives me "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER".

I couldn't get past this (I don't have the Windows XP disk), and so I restarted the computer and pressed 'Del' to get into the (I think it's called BIOS menu? Not sure, the blue screen thing), I looked at the boot up priorities and moved Hard Disk to one priority level above Disk boot, however this made no difference.

I am good with the computers but not when it comes to hardware and things like this. So PLEASE if you use a term I may be unfamiliar with please explain what it is. I am very frustrated and disappointed that this does not work.

Thank you very much,

Hato
 

A:"Disk boot failure, insert system disk and press enter"

Welcome to TSG!!

I'm guessing that, perhaps, a cable has come loose during shipping. Open the computer's case and look around. Usually the hard drive is mounted toward the front of the system. It's a device about 3.5" wide by 5" long and about an inch thick. There should be two cables plugged into the back end, one of which comes from the power supply, the other should be plugged into the motherboard.
 

Read other 2 answers