Over 1 million tech questions and answers.

very confused: default gateway, DCHP and DNS server failure

Q: very confused: default gateway, DCHP and DNS server failure

My desktop computer was not connecting to the internet even though there was a connection. I ran a diagnostic test and it said that my default IP gateway, DCHP server and DNS server all failed. I don't know how to fix this problem so I did several things. I did an ipconfig release/renew in the cmd promt, I manually typed in my ip address, subnet mask and default gateway and i erased and added the same wireless connection and still nothing happened. Then I logged into my router on another computer and changed the data encryption from WPA to WEP so I can get on the internet with my laptop since my laptop did not support WPA encryption and walla I was able to connect to the internet on my desktop. I am not sure how changing the encryption from WPA to WEP has anything to do with a failure from my DNS and DCHP server and default IP gaeway. Can someone explain so I can understand this?

RELEVANCY SCORE 200
Preferred Solution: very confused: default gateway, DCHP and DNS server failure

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: very confused: default gateway, DCHP and DNS server failure

Read other 11 answers
RELEVANCY SCORE 71.6

Windows XP does not assign a WINS Server, DNS Server, or Default Gateway.

Here is the output from ipconfig /all:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Lon Hoss>IPCONFIG /ALL

Windows IP Configuration

Host Name . . . . . . . . . . . . : omnibook-6100
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/100 VM Network Connecti
on
Physical Address. . . . . . . . . : 00-C0-9F-09-00-6D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IP Address. . . : 169.254.237.137
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

C:\Documents and Settings\Lon Hoss>
 

A:Windows XP does not assign a WINS Server, DNS Server, or Default Gateway

Read other 9 answers
RELEVANCY SCORE 71.2

My sister's HP Laptop is acting up. Every network that I try to connect to, it manages to connect to the network and receive an IP address, however it does not get the following:

default gateway
DNS sever
WINS server

It's running Vista 32Bit Home Edition, and I have tried resetting to factory defaults to no avail. Also, I have tried connecting to many networks all ending with the same problem... Any ideas?

Read other answers
RELEVANCY SCORE 68

Correct me if I'm wrong

(Working with old computer, getting it to work)
I was having problems with re-installing Windows XP and SP1-3 updates, and connecting to internet.and getting DNS errs.
Went into ipconfig, and had no default gateway

So, I eventually found my way to windows error reports,doing a search:
for "setuperr"

Turns out the "computer name" had errors in it with non-allowed characters.
Went into Control Panel, clicked on System, did the fix.
No underlines, etc. allowed

Looking into setuperr logs is really helpful, dont ya think?
 

Read other answers
RELEVANCY SCORE 68

Sometimes I have internet connection for a few seconds, if I'm lucky maybe three minutes. I can get two different messages when I run the Windows Troubleshooting option: "DNS server isn't responding" or "The default gateway is not available." This has been going on about a week. I have not made any changes to my laptop, not even a Windows update, or a driver update, or anything like that.

I have a Toshiba Satellite L655 laptop. I'm running Windows 7 Ultimate 64-bit. I live in a rural area that does not have home telephone or internet lines, so I access the internet using a 3G data card. There is only one small spot in my house that receives a signal so I have a Zoom Travel Router that I plug the data card into and then use my computer in a different room in the house. This setup has been working great for almost two years.

Below is the coding in the ipconfig file. It's pretty short. The default gateway is the ip address for the Zoom Router as provided in the User Manual. I talked to my ISP provider and they said they could only help me if I plugged the data card directly into the computer. They could not or would not help me if I used a Wifi router.

If you tell me I need to make changes to the ipconfig file, then you will have to tell me how to do that. I'm not afraid to make changes, I'm just not techie enough that I know how to do it.

Any help you can give me will be greatly appreciated. I hate being without the internet.

... Read more

A:Default Gateway Not Available and/or DNS Server Not Responding

I doubt that I know enough to help you, but maybe I can help gather info so that others can help you.

Please run this code from the command prompt window:

Code:
ipconfig/all > %UserProfile%\Desktop\IP.txt
edit: you can copy the info in the code box above and...
...paste it into a command prompt window as shown in the video below.

That should create a text file on your desktop.

Please attach that text file to your next post.


These tutorials might help you:

Command Prompt

Screenshots and Files - Upload and Post in Seven Forums

edit:

Read other 7 answers
RELEVANCY SCORE 68

Hi,
I have been having some trouble with my internet for awhile now. It fine one second and than it will get really slow and eventually stop working. When I troubleshoot to see what the problem is it either gives me DNS server is not responding or default gateway is not available, sometimes it will give me both. It says it fixes the default gateway problem but it will show up again 5 minutes later. If someone could help me that would be awesome

Here is my ipconfig /all
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\MNO>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : MNO-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 802.11n Wireless LAN Card
Physical Address. . . . . . . . . : 9C-B7-0D-FD-26-20
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.0.9(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Friday, September 28, 2012 10:15:02 PM
Lease Expires . . . . . . . . . . : Friday, September 28, 2012 11:15:19 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . ... Read more

A:DNS server not responding and default gateway is not available

Read other 7 answers
RELEVANCY SCORE 68

Can anyone explain why the first packet is to the default gateway and not the DNS server?

I have a client machine set up
IP 192.168.1.2
default gateway 192.168.1.1
Primary DNS server 192.168.1.53

What confuses me, is when I clear the NetBIOS and DNS cache, and then try to ping another computer on my network by name,
eg 'ping computer2'

The first packet sent is a DNS packet, requesting the IP of computer2.mydomain.com
But it is sent to the default gateway

The next packet is the same but sent to the IP I have said is the DNS server, this the packet I expected to see first.

Can anyone explain why the first packet is to the default gateway and not the DNS server?

Hope that is the only required information. If you think you can answer, with more information, just ask.
 

Read other answers
RELEVANCY SCORE 67.2

Hello.

On my W2K server I have two NIC's, one for the external connection to the internet, and one for the internal connection to my workstation. I was messing around (computers and beer, bad...) so I'm not sure what I've done, but here are the details.

On the internal NIC I've specified an ip of 198.162.255.1, a subnet mask of 255.255.255.0 and a default gateway of 198.162.255.1 (I'm assuming the default gateway, because the server is cabled directly to the workstation, is the IP of the server.). Using a default gateway that matches the IP of the server was working, but now when I ipconfig the default gateway is blank. Furthermore, when I ipconfig on the workstation, it picks up an IP from DHCP, but again the gateway is blank. The workstation and server cannot communicate other than the workstation grabbing the IP address.

Can anyone make any suggestions that might lead to a resolution? I'm fresh out of ideas.

Thanks in advance.
Kevin
 

A:Troubles configuring default gateway W2K server

Change the third octet of your addresses to something other than 255.
 

Read other 3 answers
RELEVANCY SCORE 67.2

I am running Windows 7 64-bit. My Internet connection keeps getting dropped, and when I run the troubleshooter, I can get two different messages: "(DNS server) is not responding" or "The default gateway is not available." When I get the former, I have to restart my router. Any amount of time later, my connection is dropped again. It can be a day or just a couple of minutes.

I'm using an Arris DG860A provided by time warner cable. Seems to drop more frequently when i run a P2P program. I also thought about upgrading my Realtek PCIe GBE Family Controller from version 7.50.1123.2011 to version 7.073.0723.2013

Here is my ipconfig /all:

Windows IP Configuration

Host Name . . . . . . . . . . . . : Richard
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : socal.rr.com

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : E0-06-E6-31-0A-90
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : socal.rr.com
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . ... Read more

A:Internet keeps going out: Default Gateway and DNS Server error

Hello,

Please post speedtest for review.
Speedtest.net by Ookla - The Global Broadband Speed Test

By any chance are you aware if others are heavily utilizing the bandwidth like P2P, video streaming or heavy gaming.

Read other 2 answers
RELEVANCY SCORE 67.2

I have one Linksys router serve as a default gateway (192.168.0.1).
But now I want my another linksys WRT54G (192.168.0.5) to be the DHCP server, not the Gateway.
The DHCP works, but once the computers get the IP from the DHCP server, the gateway shown is 192.168.0.5.

Is there any way to make it the DHCP server not the default gateway?
How to or what to set at the WRT54G so that the default gateway will be 192.168.0.1?

This is the diagram showing my network.
Please advice....

Code:

Modem
|
|
|
(Gateway) (DHCP)
192.168.0.1 --------- Linksys WRT54G (alternative: Netgear WGR614)
| 192.168.0.5
|
|
|
(switches)
| |
| |
| |
PC1 PC2...
 

A:How to make a DHCP server not the default gateway

You can set Default Gateway in the 192.168.0.5 router to be 192.158.0.1 if you so choose, it's on the Settings tab.
 

Read other 3 answers
RELEVANCY SCORE 65.6

Hey,

So I'm somewhat of an idiot when it comes to computers, and I'm having quite a hard time here.

I currently have 3 laptops running on a D-Link DIR-615 wireless router.

2 of them are running fine, but the 3rd one can't connect to the Internet. Well, sometimes it will for a few seconds, but most of the time, it will time out, and Internet's always dropped.

When I ran a Intel PROset/Wireless Manual Diagnostic, all the test pass except for the Ping Test. Sometimes, it will say "Response: Default Gateway, No Response: DHCP server", although most of the times, both have no response.

Here's the interesting thing: I have the laptop for about 6 weeks now. At the beginning, it worked perfectly well. After 4 weeks, Internet kept crashing. Did a system restore, and Internet worked for a few days ...then, out of the blue, started crashing again, and now I can't connect ever (even though I always show a strong signal reception on my icon).

I have no idea what to do here. I've been going through forums, tried the following:

- Changing wireless channel
- TCP/IP stack repair options
- Calling Dell (what a joke that was...)

I just don't understand why one laptop doesn't connect (even though it did 3 weeks ago without problem) and the 2 other ones work great ...my roomates are getting tired of me borrowing their laptops, so I need to figure this out!
PLEASE HELP !!!

Thanks !!

PS: I'm running on a Dell laptop with Win7 .... Read more

A:Ping Test: No Response: Default Gateway, DHCP Server

Read other 16 answers
RELEVANCY SCORE 65.6

Hey,

So I'm somewhat of an idiot when it comes to computers, and I'm having quite a hard time here.

I currently have 3 laptops running on a D-Link DIR-615 wireless router.

2 of them are running fine, but the 3rd one can't connect to the Internet. Well, sometimes it will for a few seconds, but most of the time, it will time out, and Internet's always dropped.

When I ran a Intel PROset/Wireless Manual Diagnostic, all the test pass except for the Ping Test. Sometimes, it will say "Response: Default Gateway, No Response: DHCP server", although most of the times, both have no response.

Here's the interesting thing: I have the laptop for about 6 weeks now. At the beginning, it worked perfectly well. After 4 weeks, Internet kept crashing. Did a system restore, and Internet worked for a few days ...then, out of the blue, started crashing again, and now I can't connect ever (even though I always show a strong signal reception on my icon).

I have no idea what to do here. I've been going through forums, tried the following:

- Changing wireless channel
- TCP/IP stack repair options
- Calling Dell (what a joke that was...)

I just don't understand why one laptop doesn't connect (even though it did 3 weeks ago without problem) and the 2 other ones work great ...my roomates are getting tired of me borrowing their laptops, so I need to figure this out!
PLEASE HELP !!!

Thanks !!

PS: I'm running on a Dell laptop with Win7 ...the other laptops, we hav... Read more

A:Ping Test: No Response: Default Gateway, DHCP Server

and welcome to the Forum

Is yours farther from the router than the others? Have you installed the newest driver for the wireless adaptor?

Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Remove all the stored wireless network profiles and search for the network again.

How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL


Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

then please Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you ge... Read more

Read other 1 answers
RELEVANCY SCORE 65.2

Have a dell Inspiron laptop with a Intel Centrino wirelss -N2230 adaptor, with windows 8.1 OS. The ping test fails and I cannot get a wireless internet connection (Ping Test - Failed - No Response from Default Gateway/DHCP Server) is the error. Other devices work fine using this network. Have tried turning off firewall, resetting wireless adapter, completely removing virus software, did a system restore, nothing is working. I keep getting the yellow triangle
"limited" which of course means no connection. Icon in the task bar blinks 3 bars with yellow triangle, 4 bars with yellow triangle, no bars. It blinks from not connected to connected to limited. Everything has been working fine for the last six months. Can anyone help with this?

Windows IP Configuration
Host Name . . . . . . . . . . . . : Business1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Bluetooth Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network) #2
Physical Address. . . . . . . . . : 84-A6-C8-B4-62-56
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Ethernet 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Eas... Read more

A:Ping Test - Failed - No Response from Default Gateway/DHCP Server

Hello, the ping test is entirely useless if you are not actually connected to the network Please describe your issue in more details, including any messages or errors that you receive when you try to connect to your wireless router; what kind of wireless security is on the router, what make and model, if you are able to connect any other computers or devices to it...you get the point.
Regards
The Cleaver
 

Read other 2 answers
RELEVANCY SCORE 65.2

Hello, I am having a somewhat bizarre, extremely frustrating issue. I can connect to the internet via wireless just fine, and everything will be hunky-dory for a while. After a while, however (this varies anywhere from a day to a week), there will be a small hiccup on the connection, and then something fails in the Acquiring Network Address stage. My computers will get an IP, but they will not get the default gateway or DNS server.

I say computers because this happens on both my PC and laptop. This issue does NOT, however, occur for anyone else in the household.

I have tried a plethora of fixes, from simple computer reboots to fiddling with all sorts of settings, and nothing works to reestablish the connection. My father has also tried fixing it, to no avail. I have to go and reset my router, which also interrupts TV service, because it is through AT&T U-Verse. Needless to say, this does not make other people in the household very happy, and I really shouldn't have to be resetting my router every couple of days like that.

My PC uses a Netgear WG111v3 adapter and is Windows XP. My laptop has on-board Wifi and is Windows XP Professional. I am not sure why I am the only person in the household that experiences this issue. Could certain programs like AIM be causing problems?

Any help would be greatly appreciated, thanks.
 

A:Wireless connection briefly drops, then will not grant default gateway or DNS server

Nobody?
 

Read other 2 answers
RELEVANCY SCORE 65.2

I have a small network with a multi-homed server. The 1st NIC on the server has an IP address of 192.168.2.1 and the default gateway was set to 192.168.2.7. The Second NIC card has an IP of 10.0.2.7 and no default gateway given. The client PC's are configured for DHCP, and when they log in, are successfully given an IP address and the default gateway I assigned on the first card.
However, here is where my problem lies:
The server can ping both cards
The clients can only ping the 1st card.
Neither the Server or clients can ping the default gateway.

I have RIP installed, and IP Forwarding marked, so I can't understand why the default gateway is not working.

Anyone know anything on this?
 

A:{Solved} - Unable to Ping Default Gateway on Multi-homed Server

Greetings

Ok... since you have not given all the information, let me make a guess at what it is:

192.168.2.7 = IP address of a router to the rest of the world
10.0.2.x = Internal network

Ok... here is the problem:

You have given the client's the IP address of the router as their router... however, it is NOT on their network.

This is what you need to do:

Change the default gateway settings on the client's machines to the IP address 10.0.2.7 (and add the 198.168.2.1 address as the default gateway on the server).

So... this is how the routing works. I am on a client machine, and I want to talk to the world. I send my packet to my Default gateway (the server). The server then routes it from itself (on the 10.x.x.x network) to that network card's default gateway (the NIC on the 192.168.x.x network). It then goes from that NIC to that NIC's default gateway, 192.168.2.7, and out to the world.

I hope this helps

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/reuel/multiboot

Every morning is the dawn of a new error...
 

Read other 2 answers
RELEVANCY SCORE 64.4

When I create a virtual switch on hyper v, i lose network connectivity and the default gateway is missing
I have to manually put the default gateway in and disable and re enable the network adaptor each time the server restarts in order to get network connectivity. I am running windows server 2012

I have tried deleting the virtual switch on hyper v, deleting the network adaptor and reinstalling it and creating the virtual switch again

Any help would be great

Thanks
 

Read other answers
RELEVANCY SCORE 64.4

My roomates computer has an issue that I have not been able to solve all week. here's the gist of it. The computer connects wireless, and is able to get an IP from router. I can ping the router, and other computers on the network. All other comupters on network are able to access the internet.

One thing that is happening is the DHCP Service keeps stopping on me. I've perused the posts on here looking for answer's. Here's a list of all I've done.

Disabled then enabled wireless adapter
uninstall/reinstall wireless adapter
manually set IP address
repaired winsock/winsock2 entries using LSPFix.exe and "netsh winsock reset" command (elevated to admin)
ran virus scan (AVG 8.0.169) with no hits
ran AD-aware SE (1 hit, removed, did not solve issue)
ran RegCure with 999 hits, cleaned, did not solve problem
Try'd to do a "system restore"..but the computer couldn't do it (hard drive has 6% free space)

I'd give a screenshot of the error, but its on another comp. Here's what it says:

"Host Process for Windows Services stopped working and was closed. A problem caused the application to stop working correctly. Windows will notify you if a solution is available."

Any help is appreciated.

Read other answers
RELEVANCY SCORE 63.6

Hey,

Before continuing, this is a thread that I currently have going, if you want extra details on what's been going on. I'll try to explain it quickly here:

My laptop won't connect to wireless Internet. Doesn't matter where I am, so it's not a router problem.
I've tried many things (can be seen on the other thread), and still can't get wireless Internet connection.

Before I go any further, I'm not great with computers, so any instructions, please, eaassyyy!

Now the weird thing is, when I'm in Safe Mode with networking, Internet seems to be working fine!
As you can see in the title, my Ping test is showing something is wrong.

I have no idea what to do here. I've been going through forums, tried the following:

- Changing wireless channel
- TCP/IP stack repair options
- Calling Dell (what a joke that was...)
- ran an ipconfig /all (see on the other thread through my forum link)
- removed Mcafee (using Windows Essentials), and when I did that, Internet worked for 5-10mins then crashed again.
- checked the Mac filtering settings on my router settings

Also, my computer crashed the other day (got a blue screen, shut itself down). I posted the details in the thread.

Finally, my great friend the moderator Etaf asked me to post this to see if I have a problem that this forum could help me with ... I read the 1st post, here is the mentioned information (I couldn't do #3 because I run on 64-bit):

Hijiack This (when I ran i... Read more

A:Wireless Internet not working / Ping Test: No Response: Default Gateway, DHCP Server

I forgot to put the link to my thread on the other forum:

http://forums.techguy.org/windows-7/1041714-ping-test-no-response-default.html#post8263476

Results for the other test (also see attached for the 2nd file) :

DDS:

.
DDS (Ver_2011-08-26.01) - NTFSAMD64
Internet Explorer: 8.0.7601.17514 BrowserJavaVersion: 1.6.0_29
Run by Pierre at 22:18:43 on 2012-02-20
Microsoft Windows 7 Home Premium 6.1.7601.1.1252.2.1033.18.6038.4227 [GMT -5:00]
.
AV: Microsoft Security Essentials *Enabled/Updated* {108DAC43-C256-20B7-BB05-914135DA5160}
SP: Microsoft Security Essentials *Enabled/Updated* {ABEC4DA7-E46C-2F39-81B5-AA334E5D1BDD}
SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
c:\Program Files\Microsoft Security Client\Antimalware\MsMpEng.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\system32\WLANExt.exe
C:\Windows\system32\conhost.exe
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\armsvc.exe
C:\Program Files\Realtek\Audio\HDA\AER... Read more

Read other 3 answers
RELEVANCY SCORE 62.8

I'm not sure how many people here are familiar with Server 2003, but I'm struggling...

I am attempting to set up the server with the DHCP role. Are there any other "roles" that I need to install before DHCP will work? I have set the scope (192.168.0.1 to 192.168.0.20) and I have "reserved" the 192.168.0.1 address to the server itself (using its MAC address as required). Nothing with it seems to be working. NONE of the computers on my network (4) are not getting IP addresses.

I really need to get this working so that I can start sharing my internet connection (using the "Remote Access/VPN Server" role -- NAT)

What am I doing wrong?

Thanks,
-Wes
 

A:DCHP Server problems

Read other 7 answers
RELEVANCY SCORE 62.8

Hi guys,

Hope somebody can help me, I've just recently switched to BT broadband at home and have the new v2 homehub router. I've got 2 laptops and a desktop, the desktop and the one laptop connect wirelessly to the internet perfectly but i'm at my wits end with the other laptop. It finds the wireless network but then gives "limited or no connectivity"

I can't get it to assign an IP address properly. if i go to run > cmd > ipconfig then i get and autoconfiguration IP of 169.254.201.30 and a subnet mask of 255.255.0.0 with the rest blank. Am i right in thinking an ip starting 169 is a personal one and it should really start with 192 as the others do?

I have tried cmd > ipconfig/release and then ipconfig/renew but then get "An error occurred while renewing interface Wireless Network Connection 5 : unable to contact your dchp server. Request has timed out"

I have tried restarting everything to no avail and have tried ispfix.exe and winsockxpfix but sadly no joy there either.

Basically i'm stumped and would be willing to give any ideas a go.

Thanks in advance

James

A:Can't get an IP address from DCHP server, HELP!!!!!

You say other computers on the network have connected successfully? If that is the case, please go to the working computer and open command prompt.

ipconfig

Identify your IP Address, Subnet Mask and Default Gateway.

With that being said; go to the computer with the issue and copy that information into...

1) Control Panel
2) Network Connections
3) Right Click Wireless connection, Properties
4) Go to the General tab, scroll down to 'Internet Protocol (TCP/IP)
5) Highlight it and click properties.
5) Select 'Use the following IP address'
6) Fill in the blanks. Make sure you change the IP Address
-example; if you have 192.168.1.3, change it to 192.168.1.20 so there are no IP conflict issues on the network.
7) Leave 'Obtain DNS server address automatically'
8) Okay
9) Close.

Sorry if you already knew how to assign a Static IP address, I just assume the worst with everyone. Let me know how that goes.

Read other 2 answers
RELEVANCY SCORE 62

Trying to create two seperate VLANs on a switch and have them use the same Windows 2008 DHCP server.

Example: VLAN1 - 192.168.1.0 /24
VLAN2 - 192.168.2.0 /24

What does the client on VLAN1 send to the DHCP server so that it knows to pull an address from 192.168.1.0 and not 192.168.2.0?
 

A:Two Seperate VLANs 1 DCHP Server.

You need to set up a DHCP relay between VLANs to direct the DHCP address broadcasts to the DHCP server outside of the client's VLAN. If you want the switch to do this you'll need to invoke a feature called an IP Helper. One thing to verify is if you need to have a layer 3 switch to gain this feature. I'm pretty positive you do because of how IP Helper works.
 

Read other 3 answers
RELEVANCY SCORE 62

Greetings,Thank you in advance for your assistance!I have discovered that my DCHP settings have been rerouted to IP addresses known to be affiliated with the Netsky Worm/Trojan. (209.18.47.61 209.18.47.62)In addition, have noted seeing certain config. and XML files associated with Server 2008 enterprise system on my computer.According to OTL, when booting in safe mode there are two different sets of drivers loading.There are over 1300 files named "Channel_0" on my computer. A google search revealed that these files are associated with RSS feeds of which I have willingly subscibed to any.I was able to recently gain dos access, not sure if this is possible now, and noted the presence of a RAM Drive Drive X: on my system.I am not able to run GMER as it says it can not find the config/system file or it is currently in use.Having thrown just about every online virus/Malware scan in the book at this thing yields no results.Here are the recent DDS and OTL scans:UNLESS SPECIFICALLY INSTRUCTED, DO NOT POST THIS LOG.IF REQUESTED, ZIP IT UP & ATTACH ITDDS (Ver_10-03-17.01)Microsoft Windows 7 Professional Boot Device: \Device\HarddiskVolume1Install Date: 4/21/2010 13:05:35System Uptime: 5/3/2010 04:06:15 (6 hours ago)Motherboard: MSI | | G41TM-E43 (MS-7592)Processor: Intel? Core™2 Duo CPU E4500 @ 2.20GHz | CPU 1 | 2203/200mhz==== Disk Partitions =========================C: is FIXED (NTFS) - 466 GiB total, 436.885 GiB free.D: is CDROM ()E: is CDROM ()==== Dis... Read more

A:DCHP Redirect - Netsky Server

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. You can subscribe by clicking the Options box to the right of your topic title and selecting Track This Topic.Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 2 answers
RELEVANCY SCORE 61.6

Guru's,

I have an intermittent internet connection drop that I have been unable to get rid of. I have searched the internet for possible fixes and attempted some to no avail. So I am surrendering my pride and asking for professional help:

ISP: Comcast

Modem: Motorola Surfboard SB5101U Cable Modem

Wireless Router: Belkin N150

Issue: Loss of internet functionality

Connected Wireless Devices: Nintendo Wii, Mobile Laptop running Windows 7 Ultimate, mobile phones x2, Samsung Blu-Ray Player.

Connected Ethernet Devices from Belkin router: Xbox 360, Direct TV reciver.

Possible helpful information: On occasion during the internet loss I will receive a windows message on my laptop that states there are duplicate IPs causing a problem.

Here is a log from the router:

Jan/1/2000 00:00:03 WAN DHCP client send DHCP Discover
Jan/1/2000 00:00:05 WAN DHCP client send DHCP Discover
Jan/1/2000 00:00:06 WAN DHCP client receive DHCP Offer
Jan/1/2000 00:00:06 WAN DHCP client send DHCP Request
Jan/1/2000 00:00:06 WAN DHCP client receive DHCP Ack
Jan/1/2000 00:00:06 WAN DHCP client get IP 72.197.209.105
Jan/1/2000 00:00:06 00:16:6b:92:cc:53(DIRECTV-HR24-6B) get IP 192.168.2.10
Jan/1/2000 00:00:08 00:1c:bf:99:9b:dd(Halocrisis-PC) get IP 192.168.2.11
Jan/1/2000 00:00:08 00:1c:bf:99:9b:dd(Halocrisis-PC) get IP 192.168.2.11
Jan/1/2000 00:00:09 join multicast group 224.0.0.252
Jan/1/2000 00:00:10 7c:61:93:3b:3e:b2(android_4d8c2dc) get IP 192.168.2.12
Jul/10/2011 08:47:54 192.168.2.11(Halocr... Read more

A:Possible DCHP Server Conflict between modem and router.

you cant disable it from the modem because the modem is simply that... just a device that connects you to the internet. There is no router within the 5101 modem so there will be no DHCP in there. If you had a Motorola SBG900/901/6580, then it would

The issue you are having is with the router, or your devices connecting to it. Your 'DHCP Server' is the router.

Make sure that ALL connecting devices are on automatically obtain IP addresses. Also make sure that ALL connecting devices has different host names.

With the devices that has no internet, check the IP address at that time.

If all the devices have different host names, and set to automatic, then shut down ALL equipment, including cell phones and DirectTV that is connected.

Then one by one turn on each device; first the modem, then router then the connecting devices. DO NOT turn on the connecting devices at the same time. Let them boot up first then go to the next device and so forth.

EDIT: one last thing: if everything we do fails, then the router will need to be reset to defaults as there may be some setting in there that causing this issue.
 

Read other 3 answers
RELEVANCY SCORE 61.6

Hello I'm having issues with router leasing ips outside the the gateways range.

Example Gateway ip is 192.168.0.1 and it is trying to lease out the range of 192.168.1.xxx, I'm not sure why it is doing this as the dchp server range is set in 192.168.0.xxx

Multiple router setup in house/garage room type setup line runs out here and I have my own router. Only have been noticing this problem past couple days so I reset the main router1(dlink gamerlounge) then setup the ip back to 192.168.0.1 and reset my other router2(netgear wgr 614v4)

Noticed I had to unplug router2 before I could re-setup router1, after that I just plugged it back in and everything appears find for me except I'm still noticing its leasing some devices the wrong ip.

Anybody know whats wrong is one of them faulty or overheating or something, the routers are pretty old.

A:DCHP Server leasing out ips in the wrong range?

Hi seagula and welcome to Seven Forums.

Are the both routers set up with the same lease? E.G (router1=192.168.0.X/router2=192.168.0.X

Read other 3 answers
RELEVANCY SCORE 61.6

my dchp in cmd is

DCHP enbale.........................:NO
 

A:how to enable dchp in windows server 2008

Read other 8 answers
RELEVANCY SCORE 61.6

I recently sent my laptop out to have the keyboard seated correctly. When it was returned I was not able to access my internet from the wireless connection in my home. I can access the internet from unsecure networks. Tech support from my internet company stated that I most likely needed to update my driver. I am not sure which driver to update from the Lenovo site.

Lenovo T60 windows XP

C:\Documents and Settings\...............>ipconfig
Windows IP Configuration

Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
C:\Documents and Settings\...............>ipconfig /renew
Windows IP Configuration
An error occurred while renewing interface Wireless Network Connection : unable
to contact your DHCP server. Request has timed out.
No operation can be performed on Local Area Connection while it has its media di
sconnected.
 

A:Solved: Unable to connect to DCHP server

Read other 4 answers
RELEVANCY SCORE 60

Hi,
I have been having problems with internet in new flat for some time!
It connects to the wireless box and has full signal but an exclamation mark is present
I have run some tests and the IPv4 and IPv6 say they have no internet access
I also run a full test and everything passed except the ping test which failed and it said:
no response:default gateway
response: dhcp server

it suggested disabling security firewall but i'm not sure if that's the correct thing to do or even how to do that!
Any help would be much appreciated
Many thanks
Amy
 

A:Ping test failed - response: DHCP server but no response: default gateway

Read other 9 answers
RELEVANCY SCORE 56

to forward a port i typed my default gateway in the browser then i got this pageIP Address Lookup - Home page at the top right corner there was a login field wherei tried to login without having an account i tried .I tried five times and each time i failed.after five times the webpage banned me for fifteen minutes from then my default gateway is 0.0.0.0.
this is my ip config



Code:
Windows IP Configuration

Host Name . . . . . . . . . . . . : sam
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

PPP adapter BSNL-East Internet:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : BSNL-East Internet
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 117.226.251.52(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 0.0.0.0
DNS Servers . . . . . . . . . . . : 8.8.8.8
8.8.4.4
Primary WINS Server . . . . . . . : 10.11.12.13
Secondary WINS Server . . . . . . : 10.11.12.14
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Local Area Connection* 14:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microso... Read more

A:My default gateway is 0.0.0.0 how do i change my default gateway

Hello Sal, welcome!

Please post some more info on your PC and LAN setup. If your gateway was truely only zeroes... you probably would not be able to access internet or this forum either...

Mark

Read other 9 answers
RELEVANCY SCORE 55.6

Hi. How is everyone? I am having trouble with my wireless connection. I am using a D-link wireless card and a D-link modem/router. My wireless internet connection drops out about every hour, I refresh my browser, press reconnect to MSN Messenger and it is all good again. But every so often I drops out and won't reconnect, I need to restart the computer to get it connected again. When it does this, I press troubleshoot on messenger and it gives a message " Default gateway - your gateway appears to be offline ". Any ideas why this is happening? Thanks for your replies.
 

A:Default gateway - your gateway appears to be offline

Read other 7 answers
RELEVANCY SCORE 55.6

Hello, I have read a few similar posts and the resolutions but it doesn't appear to be working for me. Any help is appreciated. I apologize if I am leaving out any important info.

I'm running a Windows XP PC, wired to a Verizon FIOS modem/router, model MI424WR. I have a second computer connected via wire to this and a third computer connected wirelessly. As of 2 hours ago and for months, all 3 machines have worked fine.

My PC froze while playing a game and I reset it. This is not common but it has happened before without issue upon start up. However this time I received a limited/no connectivity message. When repair was attempted it didn't work because "the network did not assign a network address to the computer". The 2nd and 3rd PC work fine though.

Back on my first PC, when I view the details there is a physical address, IP address, and subnet mask, BUT there is no Default Gateway, DNS Server, or WINS Server.

I have tried the other suggestions I read about RESET TCP/IP stack and RESET WINSOCK entries then restarting my machine but neither of these worked.

Under device manager my NVIDEA nForce networking adapter says it is working properly and there isn't any red X or yellow indicators.

The only weird thing I saw which i have not seen discussed here is when I run IPCONFIG /ALL: It says IP Routing enabled: NO and WINS Proxy enabled: NO.

Thank you in advance for any help and please let me know if you need some additional information.

Tha... Read more

A:Solved: "Network did not assign a network address" no Default gateway, no DNS server,

Read other 14 answers
RELEVANCY SCORE 51.2

Okay i last night i downloaded a .exe and scanned it with my nod32, it showed it was clean, although it was 55kb, but due to the nature of the file, i figured it seemed right. i was wrong, once run, it took me to google, i instantly knew something was up but i was confused because my nod32 usually picks up these kind of .exe's? confused and rather annoyed, i did a full system scan which showed no sign of any malware/viruses. so i figured it was nothing. Once again i was wrong, my computer is now extremley slow, as if i have 128mb of ram and whenever i open a folder i get this pop-up

Yes and No both take me to freevirusscan.com or something, which ironicly? is blocked by nod32.

I had this before the exact same thing, only last time i was using avast, and i got rid of it by reformatting my pc which i dont want to do this time..

Please understand this is the first time i've asked for help and even posted on this forum so if I've forgotten anything, or made mistakes, im sorry.

p.s: here's my hijack this log.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 01:22:59, on 19/07/2008
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskeng.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\Windows\RtHDVCpl.exe
C:\Program Files\ESET\ESET NOD32 Antivirus\egui.exe
C:\Program Files\Java\jre1.6.0_06\bin\jusched.exe
C:\Windows\vVX1000.exe
C:\Windows\Sy... Read more

A:Rather confused due to nod32 failure.

MY windows explorer keeps crashing also.

I've scanned multiple time with nod32 and i did scan with supernativirus but it was closed half way :s

So im pretty much out of idea's and the problems getting alot worse, i need halp asap :|
 

Read other 2 answers
RELEVANCY SCORE 50.4

Hello, I am not able to get my theme for winxp back to default. When I open control panel, for example, the test above the "switch to classic view" is not the default color the way it was earlier. I tried to use the adjustments for themes and colors but to no avail. What are the steps to go back to the way windows xp home default would be at the onset. Thanks. Joe
 

A:Solved: winxp themes or default colors- confused!

Right click on your desktop and select Properties.
On the Themes tab, select Windows XP [Modified] from the
drop down and Apply and OK.
 

Read other 2 answers
RELEVANCY SCORE 49.2

I was infected(and still might be) with the storm worm about 2 weeks back. It wouldn't let me open my email, my ISP was calling telling me I had a virus(though they offer no assistance). After 2 days of running scan after scan & using various programs I thought it was all cleaned.

Fast forward to today...I had uploaded some new files last night to my web server. I visit the site today that I had uploaded the files to and low and behold it tells me it has a virus!

I looked at the FTP dates & the last I had uploaded files was yesterday(10/10) yet it was showing a few files as being modified today(10/11). I downloaded the files & saw that attached to the bottom was a line of code, an iframe to be exact, with a URL to a site that was trying to download the infected files.

This URL as far as I know is part of the storm virus (do not try to go there) y x b e g a n d o t c o m

I talked with my web host & they said that it had to be on my end since the server can't get infected...because its a Linux server.

So my question then is how did the file get modified? Since I'm 99% sure the file was modified AFTER I uploaded it then how can that happen? I doubt the server was hacked in order to add it to a few random files.

The files on my end did not have the code before I uploaded them...the only 'new' thing I uploaded besides PHP files was wordpress...is that known to have any holes when it comes to the storm worm?

I'm just conf... Read more

A:Confused As To Storm Worm On Web Server...

Shamelss bump...it happened again today...

I'm going to go ahead and guess that possibly passwords were stolen & now being used to hack into the website & modify the files - its a stretch but seems like the most realistic answer right now.

Any better suggestions let me know, I'm just going to go ahead and update all passwords see if that doesn't fix it.

Read other 4 answers
RELEVANCY SCORE 48.8

i need help opening my ports on my router. i wend into cmd and i have no default gateway lit just reads as :: how else can i find my routers ip address?
 

A:No default gateway

You can also find it by taking it back to wherever you got it and they could tell you by searching the MAC address located on the underside of the router. However most router IP address's or default gateway is 192.168.1.1
 

Read other 2 answers
RELEVANCY SCORE 48.8

Hello, my wireless internet goes off and on. The yellow exclamation comes up. It last for several seconds and then does it again if I try to load several web pages at once. When I run the diagnostics, Windows says it "fixed" that the Default Gateway was not available. Is there something on my laptop that I need to change as far as settings are concerned because it works some of the time but not all of the time. It seems to stop working when I try loading youtube videos.
 

A:Default Gateway Not Available

Read other 16 answers
RELEVANCY SCORE 48.8

I am using a router with internet access with the default gateway of 192.168.1.1 and another router with intranet access with the default gateway of 192.168.105.4 and the internet router is not being accessed even with the correct address. It thinks those two are the same.

A:Default Gateway not doing anything

Based on my limited understanding, a router wouldn't have a default gateway... they each have an address, and it can be used as your client system's default gateway.

What is your network mask on your client? What is the ip of your client? My guess is that your client is 192.168.105.x with a subnet mask of 255.255.255.0 based on your description. The client will send all requests outside of the local network to whichever is set as its default gateway, which should (I believe) be on the same subnet.

Since you have 2 gateways, you will probably need to do some sort of routing beyond what is provided with a default gateway.

Read other 1 answers
RELEVANCY SCORE 48.8

Hi there,

I have been getting disconnected from the internet a lot lately. I mostly get disconnected when I'm not at the computer, but leave it downloading. I am behind a router and only have a few ports (utorrent) forwarded to my computer. The problem always resolves when I click on troubleshoot internet connection, with Windows stating that the default gateway was not available. I also noticed, that it mostly happens when I use VLC, I don't know if it's a coincidence.
Thank you,

Immortali

Read other answers
RELEVANCY SCORE 48.8

Hello Forums,

I am currently at university with a new Dell laptop with Windows 7 installed. For some reason, my computer is experiencing intermittent wireless disconnections (WPA2-Enterprise) on a very bad day, every 30 seconds and on good days 5-10 minutes. I've tried troubleshooting problems but it only resets the wireless connection and does not solve the problem. I've had my Intel Centrino software updated and have uninstalled McAfee Security problem uninstalled, ticked off the power management saving option of the Intel Centrino.

I've used my computer at home and did not experience any problems using my home's wireless connection (WEP).

I have flushed the DNS Cache per your request from the posting guidelines

I do not have any Apple software installed on my computer. And Skype does not seem to be enabled.

Thank you for your time.

A:The default gateway is not available

Have you specifically updated the driver for the wireless device itself?

Read other 7 answers
RELEVANCY SCORE 48.8

I keep losing connections to the internet and "Default Gateway is not available" is the reason every time. I have tried reseting my router and that hasn't worked. It has been happening since I did a factory restore a few weeks ago. Phones and other computers on the same router work. Here is my info, if you need more just let me know.


HP Pavilion g7-2010nr

1. Wireless
2. Cox Communications
3. Cable
4. Netgear CG3000D-RG
5. Avast


IPCONFIG:



Windows IP Configuration

Host Name . . . . . . . . . . . . : Sac-HP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Ralink RT5390R 802.11b/g/n 1x1 Wi-Fi Adapter
Physical Address. . . . . . . . . : 84-4B-F5-68-FF-23
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8463:e0b5:2436:eff8%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.5(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, February 10, 2015 5:41:17 PM
Lease Expires . . . . . . . . . . : Tuesday, February 10, 2015 6:41:22 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 19... Read more

A:Default Gateway is not available

did you try renewing your IP?

In Command Prompt, run:

ipconfig /release
ipconfig /renew

Read other 7 answers
RELEVANCY SCORE 48.8

So im trying to use a linksys router as an access point in my house my I cannot access the router page because I don't know my default gateway. when i go to the command prompt i type ipconfig /all and the default gateway is 0.0.0.0 so i type it in to the search bar and nothing happens. Somebody please help me!!!
 

A:Default Gateway 0.0.0.0

Reset the router to factory defaults, connect a PC to a router LAN port, and ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

[Press ENTER after each command.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 48.8

Hello, about a week ago, I purchased an Asus x401u laptop, that hasn't been able to connect wirelessly to the internet since I bought it. Windows diagnostic keeps coming up saying that the default gateway is unavailable. I know that the wireless does indeed work because i have 4 other devices connected wirelessly just fine. Also, I can connect to the internet just fine with an ethernet cable. The laptop is running windows 7 64 bit and the network adapters are:

1) 802.11n Wireless LAN Card
2) Microsoft Virtual Wifi Miniport Adapter
3) Realtek PCIe GBE Family Controller

I've tried uninstalling and reinstalling them but that did not work. I've also tried /ipconfig release/renew and that didn't help either. I'm not sure what else to try. Also, it might be worth noting that my network comes up as "unidentified" when i connect to it, which is why I can't get internet access. The router we're using in the house is an Arris TG862G/CT (came with our comcast internet plan).

Here is the /ipconfig all from the problematic laptop:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Emily>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Emily-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : hsd1.fl.comcast.net.... Read more

A:Default gateway not available

Read other 8 answers
RELEVANCY SCORE 48.8

Hello all,

Essentially on my apartments network I can connect and get Internet access, but at random intervals while still maintaining a connection to the network I lose all Internet access. If I run the network repair diagnostic it resets the wireless adapter says it fixed the problem of the default gateway not being available and access is restored only to be booted in the same fashion a varying amount of time later repeating the cycle.

Windows 8.1 hp envy x360 less than a month of use.

Also not sure if it's relevant or not but to put it in reference it is only this network I am having trouble with. Used to have issues connecting to it at all and would BSOD occasionally but I believe I have solved this by updating some drivers and removing McAfee (meant to anyway but this forced my hand and beat laziness).

All help appreciated, and thank you in advance.

A:Default Gateway Not Available

If you are losing connection, that means that their Access Point is not powerful enough, or that they do not have enough Access Points to cover the whole building.

You can try an external USB adapter with a USB extension cable and see if that helps any. they do make USB Dongles with 2.5db antennas on them.

Read other 4 answers
RELEVANCY SCORE 48.8

So I just recently got a new Alienware 17 R2 laptop, and for some reason, I've been having a lot of issues with my internet that I didn't have on my old laptop, namely: Every so often (used to be only late at night, but nowadays it happens every 5-20 minutes or so) I'll get limited connectivity and when I troubleshoot the problem it says "Default Gateway not Available" has been fixed, this is only a temporary fix, as it happens a again a few minutes later, I don't get it.
 

Read other answers
RELEVANCY SCORE 48.8

My friend has a desktop computer, a modem, and a router. When connected through the modem the computer works fine, but when connected through the router and then the modem the computer displays 0.0.0.0 as the IP address and has no default gateway. Any idea what could cause this?

A:No Default Gateway and IP is 0.0.0.0

Did you go into the router setup and set the PPoE for his ISP for his internet connection?

Read other 2 answers
RELEVANCY SCORE 48.8

Any one have an idea how to get my computer to stop booting me off many times while using? It stops connecting to the modem and gives me the following message "default gateway not available". I follow instructions and the computer reconnects to the modem. This has happened ever since I got my dell inspiron. ANY IDEAS?

Tags: computer, modem, tao blog ca nhan

A:default gateway not available

Possible bad gateway/router. If you are using WiFi, it could be poor signal quality.

Read other 1 answers
RELEVANCY SCORE 48.8

I have Windows 7 Ultimate 64-Bit.

My internet connection randomly disconnects every 5 or so minutes. I don't know how to fix it. I have to run troubleshooting to get it to work again.

The message I get is "The default gateway is not availible".

I have a "Realtek PCIe GBE Family Controller" Network adapter. Its driver are up-to-date.

Please help.

If you need any additional information just ask.

A:The default gateway is not available. Please Help

bump

Read other 9 answers