Over 1 million tech questions and answers.

Whenever I plug in my elgato HD capture device my pc goes to a blue screen

Q: Whenever I plug in my elgato HD capture device my pc goes to a blue screen

Whenever I plug in my elgato HD capture device my pc goes to a blue screen. So what happens is I plug my elgato into my computer and open up the elgato software (Game capture HD) And it initializes (I think that is how you spell it) the elgato and 5 seconds later it will crash... I tried to re-install the drivers and the Game capture HD Software but it still does the same thing. Here is a link to a video of my screen when it crashes - 
 
- Stormzeey 

RELEVANCY SCORE 200
Preferred Solution: Whenever I plug in my elgato HD capture device my pc goes to a blue screen

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Whenever I plug in my elgato HD capture device my pc goes to a blue screen

If anyone could help it would mean a lot!

Read other 1 answers
RELEVANCY SCORE 92

When I'm trying to record something in theater mode it looks good and smooth and hd. But when I record it with Elgato it says "deinterlacing" and after that it looks laggy / crappy / not hd. I need to record good Black Ops 2 material with my ps3 / elgato please help me!

I heard that with ps3 you can get the quality better with some other wires, can someone explain how?

If you need anything else like my settings or computer specs please tell me!

I'm using Mac by the way.

-Maze

Please help!
 

A:Elgato Game Capture Device PROBLEM with Black Ops 2 [HELPME!]

Sounds like a configuration issue in your recording software/configuration.

There is no reason to deinterlace the video as it's a progressive signal (ie: 1080P) and you want to record it as a progressive signal (1080P).

As far as cables go, that device doesn't appear to offer an input options. Looks like you should be using an HDMI cable. For the most part, HDMI cables either work or they don't.
 

Read other 3 answers
RELEVANCY SCORE 81.2

I'm having the BSOD issue every time I plug in my USB HP (Adaptec AVC-3610) dual tuner. Vista Ultimate 32bit, Dell C521, Dual AMD 64 Athlon, 1GB ram, umm... , ATI 1300 video.

Attached are the dumps
View attachment MiniDumps.zip
Please Hep me! I havn't seen my stories in about a month! I have no idea how Heroes is doing after the whole march madness thing.
 

A:Blue screen with Adaptec Capture Device

Read other 8 answers
RELEVANCY SCORE 81.2

I bought this Elgato capture card yesterday and I've been trying to get it to work. I've updated my driver, and changed the video quality on both of my monitors, along with the profile (quality) on the software but I keep getting this message:

I don't know what it means by "video output format" but I want to be able to record off of it, so thank you in advance if you know how to help me.

http://postimg.org/image/xo9n729c7/
the image link, if you can't see it.
 

A:Elgato Capture Card: Won't capture anythng

I'm not familiar with it. But based on the image, there is no input signal (upper right box - Game Capture HD "no signal").

So the error is likely trying to tell you to change the output video type of whatever you have connected.
 

Read other 1 answers
RELEVANCY SCORE 80

Every time I plug in a usb device on my lenovo t60p laptop whether it's a flash drive, ipod, or mouse it gives me the blue error screen and it reboots. I don't know much about it, but at the bottom it says "dumping physical memory to disk" or something like that, and something about a crash dump. I am running Windows 7 and I don't know what is wrong and how can I fix this?

when I use PCI Card which support usb 4 ports its works fine but I can't boot usb stick anymore via PCI please help me ...!

A:The blue screen comes up every time I plug in a usb device?

Without looking at the dump files, I would have to guess at a chipset driver problem. Try installing the lasest chipset drivers from lenovo.

Read other 6 answers
RELEVANCY SCORE 75.6

I have a home made computer. Please note that i did not make it, I am not very tech-y. It has windows xp.
I just bought an Elgato Game Capture HD so i can play video games and put them on youtube.
the Elgato does not support windows xp, it does support windows 7 sp1.
My questions is what can i do?
I have all of the programs that i need on my computer already. I dont really want to spend another some-hundred dollars on a new computer and the programs and whatever else i might need. Just want to know my options. If i need to spend money on a new computer or something, please assist me with what to look for -cheaply. If i need to get a new computer, i would prefer a laptop, though this is not a necessity.
 

A:Elgato game capture hd help

What platform are you playing the game son (PC, xbox, whichever)? Will make a difference to alternatives, depending on what you want to do- bit more detail please, sure we can sort it out for you
 

Read other 3 answers
RELEVANCY SCORE 75.6

ok i have a toshiba laptop with 768 mb of ram and a pentium 4 processor. im using a usb 2.0 pcmia card and a dazzle 90. it was working fine but then my laptop fell and the wireless card that i had in the other pci slot broke one of the slots. now when i plug in my usb 2.0 card and the capture usb device in the working slot, my computer completlely locks up. then when i take it out it becomes functional again. i also sometimes get a blue screen sayin usbport.sys. plz help and i really appreciate the help that anyone can provide me with
 

A:Help please! Computer freezes when i plug in my dazzle 90 capture device

You need to take the laptop to a repair center and have it repaired. Dropping laptops is never a good thing!
 

Read other 7 answers
RELEVANCY SCORE 73.2

Just today I got an Elgato Game Capture HD so that I could record myself on YouTube playing XBOX 360, XBOX 1 and Retro Game Consoles. I installed the latest version of the Elgato Game Capture software which required me to install Microsoft .NET Framework 4.5 and also required some sort of update for Windows 7. I also downloaded the latest version of the Elgato Game Capture HD Driver. I then opened up the Elgato Game Capture software only to find that it didn't recognize my Elgato Capture device. I went into the Device Manager only to find that there was a yellow ! under the Elgato Game Capture device. I double clicked it to see what the issue was and it gave me the Code 52 error. I tried typing something in CMD to solve the problem but that didn't help. I tried uninstalling and reinstalling the driver but that didn't help. I know that the Device itself is not broken because when a console is hooked up to it then it would show on my HDMI monitor and Retro consoles are included.
Here are some pictures that explain my situation-

 IMG_20151225_183727667.jpg   64.89KB
  0 downloads

 IMG_20151225_183752807.jpg   57.63KB
  0 downloads

 IMG_20151225_183826584.jpg   94.39KB
  0 downloads

 IMG_20151225_183844359.jpg   103.82KB
  0 downloads

 IMG_20151225_184009929.jpg   72.51KB
  0 downloads

 IMG_20151225_184021240.jpg   53.5KB
  0 ... Read more

A:Elgato Game Capture HD Driver Problems Code 52

Update- I used Malwarebytes and Adwcleaner to remove viruses in case that was causing the issue. I also used wisecleaner to clean out my registry and here are the results-

 IMG_20151225_195918695_HDR.jpg   108.55KB
  0 downloads

 IMG_20151225_195928850_HDR.jpg   82.85KB
  0 downloads

 IMG_20151225_195943739_HDR.jpg   130KB
  0 downloads
 IMG_20151225_195957508_HDR.jpg   144.01KB
  0 downloads
Let me know if U have any more suggestions for me as WiseCleaner still hasn't solved my problem yet.

Read other 9 answers
RELEVANCY SCORE 73.2

I have absolutely no Idea how to fix this,
I recorded some GTA V Xbox One, with my Newly purchase Elgato Game Capture HD.
The only settings I changed is the resolution:
I put it at [email protected] (with allowance to use 60fps or whatever that tick box was).
When fast movements are made in game, when I record for example and I jump and fall off a car roof, as shown in this video I made (https://youtu.be/refYFmQPooc). You see very early on in that video what I am talking about.
Any and all helpful replies are very much appreciated!
Please reply asap

NOTE: Glitch First happens at 24 seconds into the video

Read other answers
RELEVANCY SCORE 63.6

i have been teaching people how to start 3d developing, and have recently gotten into BF3 and medal of honor.

i absolutely love gaming, and back when UT2k4 was big i liked to record vids of me playing. unfortunatly medal of honor and BF3 slow down to a whopping 2FPS when using Fraps, X Fire, and 1 with camtasia.

i need somthing 3d party that i can have a DVI-D in ,DVI-D out and a usb out to gather the vid when im done.

ultimately id like to be able to record full 1080p at full 60-70 fps

A:need 3rd party screen capture device

  
Quote: Originally Posted by Thornton


i have been teaching people how to start 3d developing, and have recently gotten into BF3 and medal of honor.

i absolutely love gaming, and back when UT2k4 was big i liked to record vids of me playing. unfortunatly medal of honor and BF3 slow down to a whopping 2FPS when using Fraps, X Fire, and 1 with camtasia.

i need somthing 3d party that i can have a DVI-D in ,DVI-D out and a usb out to gather the vid when im done.

ultimately id like to be able to record full 1080p at full 60-70 fps


I read about something that did exactly this very recently and I can't remember what it was called. I just did a search for it and I came up with something that is kind of similar, though it might be way more than you want to spend, it is called a Epiphan DVI frame grabber and lets you output to a capture station so you can capture full quality 30fps from your main display.

If I can think of the thing I saw recently, I'll come back and update this and let you know. The Epiphan thing is like $700 and I don't think the device I saw recently was that expensive. Though I think the Epiphan is exactly what you describe, with the USB Interface.

Jamie

Read other 2 answers
RELEVANCY SCORE 62.8

Reference: Woke up to a black screen -- No bootable device ...
Short of having a camera handy and taking a picture, is there any way to capture a Blue Screen in the entirety as it appears?

If there is nothing in C:\Windows\Minidump is there any other place a crash dump might be? Anything in any of the Admin Tools or reports areas?

I have been to sysdm.cpl and verified that the Small Dump Directory is listed as %systemroot%\Minidump

Read other answers
RELEVANCY SCORE 60.8

Hi,

Has anyone ever run into this? I plug in a network cable into this thinkpad and it immediately has a stop error, blue screen. If It's plugged in when I boot, it starts fine, but the connection doesn't work. I tried to ipconfig /release but it cannot release DHCP.

Nothing new was added since it started happening. I thought Virus, got the latest definitions, ran the scan, but came up empty. Any idea's?

Thanks!

Oh BTW, it's Win 2000
 

Read other answers
RELEVANCY SCORE 60.8

I originally thought it was a hardware problem because everytime I would plug or unplug my printer in the usb port (which came with the computer) and turn it on I would get the blue screen of death telling me to uninstall whatever new hardware I'd installed. I'll get the actual message for you here in a bit and post that as well. It does not do this if I plug in my digital camera or anything else. My computer is a Dell Inspiron 1150 and my printer is a Dell AIO A920 Printer. This started back in October when I got the AIM virus, I thought I'd gotten rid of it so I don't know if that has anything to do with it or not. Also I think there are some hidden processes on my computer because all I have open right now is this one window/Mozilla and my task manager says I'm running 50 processes. Is that right or is there something on my computer? Here's my Logfile:Logfile of HijackThis v1.99.1Scan saved at 11:32:20 AM, on 02/26/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\LEXBCES.EXEC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\system32\LEXPPS.EXEC:\WINDOWS\BCMSMMSG.exeC:\WIN... Read more

A:Blue Screen When I Plug My Printer Up

I plugged my printer in several times along with other hardware but I failed to make the blue screen of death appear (It's funny how when I don't want it it pops up and when I try to get it it's impossible ) Anyways, today I put a CD in to listen to it when the blue screen popped up but my computer automatically restarted which is the first time that's ever occured.

When it came back on I looked at the error report before sending it. This is all the stuff I found:

ERROR SIGNATURE
BCCode: 9C BCP1: 00000000 BCP2: 8054D370 BCP3: A2000000 BCP4: 84010400
OSVer: 5_1_2600 SP: 2_0 Product: 768_1

ERROR REPORT CONTENTS
THE FOLLOWING FILES WILL BE INCLUDED IN THIS ERROR REPORT
C:\DOCUME~1\Ziggy\LOCALS~1\Temp\WER1f0a.dir00\Mini022806-01.dmp
C:\DOCUME~1\Ziggy\LOCALS~1\Temp\WER1f0a.dir00\sysdata.xml

I went to the microsoft error report stuff and I didn't understand any of it. I really don't know what the heck is going on with my computer... Please help, I'll keep trying to get the blue screen. But I don't know it may take a couple of days.

Thanks for your patience and your help.

Rachiela

Read other 2 answers
RELEVANCY SCORE 60

Hello peeps

Im having an issue with my speedtouch 120 wireless adapter .

Only started to happen yesterday.

Basically, my pc started to get BS so i did a little testing and i found out when rebooting without my wireless adapter the pc runs ok, but when i plug in the wireless adapter not long after i will get a Blue screen IRQL-NOT-less-or-equal

Am running vista quad core intel.

Any idea folks?

A:Blue Screen When plug my wireless adpater

Hi. . .

Have you updated the drivers for the wifi adapter recently? Check w/ the manufacturer's website for any updates.

Regards. . .

jcgriff2

.

Read other 3 answers
RELEVANCY SCORE 59.6

Hello Again.
this is the same problem i put in another thread but after a recommendation i am making a new heading and hopefully this time i will correctly upload the diagnostic file. If it doesn't work this time I'm afraid i don't know what im doing wrong. Out of curiosity how long does that program need to run for? because it gave me the file about an hour ago but the green loading bar is still moving. does it ever stop? I also have another issue on another pc, but have decided it would be best to have 2 separate threads. I hope that is ok i have no intention of blowing up these forums and aggravating anyone.

A:Blue Screen When I Plug in Kindle Fire hd 7"

Hi Sixnails and welcome to SF ,


I looked at your dump files and the cause of your BSOD's point towards






Quote:
usbfilter AMD USB Filter Driver Kernel 10/7/2009 3:44:08 AM


The usbfilter.sys is the AMD USB filter driver, a component of the AMD chipset drivers.

You can try updating the usbfilter.sys. Latest version of the AMD South Bridge driver available from AMD. Installing the full Catalyst drivers should also give the option to install the AMD USB filter driver.

The AMD USB filter driver, an optional driver, is intended to improve USB performance but sometimes causes issues.


I would also suggest to update the usbport.sys and usbehci.sys to the SP1 version.

You can use this tool to update:

http://code.kliu.org/.etc/7601usbfix/

Create a System Restore point first and reboot at least twice after applying.


Hope this helps

Cheers

Dave

Read other 4 answers
RELEVANCY SCORE 59.2

Hi,
I recently purchase a DIY desktop computer but it does not come with a firewire port. I installed one on the pci slot and it was detected by the computer.
Now when I pluged in a 6 to 4 pin firewire cable to my DV cam, I could not do a capture in either the Movie Maker or Premier Elements. It says 'no capture device detected'.
I checked on the hardware under device manager, and it shows that the firewire card is working properly.
I also tried using the USB port on the DV cam to capture, but it was not detected. I heard that it requires a seperate driver from JVC manufacturer. My Cam model is GR-D270.
I would appeciate alot for any answer to my problems.
 

Read other answers
RELEVANCY SCORE 52.8

64 Bit
Windows 7 Home Premium Full installed by me
What is the age of system (hardware)? maximum 4 months
What is the age of OS installation? Same as hardware age

A:When device is plugged in, blue screen comes up

Hi,

For some reason the collection application did not pick up any BSOD minidumps (it does this occasionally). Can you check C:\Windows\Minidump and upload anything you find there.

If there is nothing there then can you check the settings mentioned in this post to see if your system is set up correctly to collect dump files when it Blue Screens.

From the event logs I can see that you have had the following BSODs.

Code:

Line 134878: El equipo se reinici? despu?s de una comprobaci?n de errores. La comprobaci?n de errores fue: 0x0000004a (0x00000000771bfdca, 0x0000000000000002, 0x0000000000000000, 0xfffff88007752ca0). Se guard? un volcado en: C:\Windows\MEMORY.DMP. Id. de informe: 090810-20794-01.
Line 160821: El equipo se reinici? despu?s de una comprobaci?n de errores. La comprobaci?n de errores fue: 0x0000001e (0xffffffffc0000005, 0xfffff800032084e0, 0x0000000000000000, 0x000007ffffff0000). Se guard? un volcado en: C:\Windows\MEMORY.DMP. Id. de informe: 090410-21684-01.
Line 200029: El equipo se reinici? despu?s de una comprobaci?n de errores. La comprobaci?n de errores fue: 0x0000003b (0x00000000c0000005, 0xfffff8000357348c, 0xfffff88003efc770, 0x0000000000000000). Se guard? un volcado en: C:\Windows\MEMORY.DMP. Id. de informe: 083010-17269-01.
Line 202014: El equipo se reinici? despu?s de una comprobaci?n de errores. La comprobaci?n de errores fue: 0x0000003b (0x00000000c0000005, 0xfffff800035be465, 0xfffff88003a8b770, 0x0000000000000000). Se guard? un volcado en: ... Read more

Read other 9 answers
RELEVANCY SCORE 52.8

I have been getting blue screen crashes now for a few months. Engineers gave me new hard drive and i re formatted. I have sps on and updated my nvidia graphics card driver. I keep getting this random blue screen and the error code starts 0x00000008E which i have been told is my graphics card? but if i have the newest driver could this still be the problem?

A:blue screen (device driver)

yes, i have had my laptop go to blue screen errors when certain drivers were installed. I eventually settled on a earlier verison and had no problems. Hoppe this helps

Read other 4 answers
RELEVANCY SCORE 52.8

Hello. I just built a new system..but decided to keep my old hard drive. i moved it to the new system, but 2000pro gives me blue screen: no bootable device. and says if i made recent changes to hardware. well i know this is due to settings..is there any way i can make it boot up on my new system? thanks.
 

A:blue screen: no bootable device

If you're using an old HDD with a new motherboard then you will get problems as the chipsets of the old motherboard and the new will not get along at all. The problems this can cause are many and various so I would recommend a format of the old drive anyways and this will resolve your problem.
 

Read other 1 answers
RELEVANCY SCORE 52.8

I have a Sony Vaio that runs Vista 64. Today I tried to plug in a USB printer and got the Blue Screen crash dump. I then tried pluggin in a USB mouse in the same port and got the same thing. I tried different USB ports with both, and still got the blue screen. Just yesterday I used the printer and mouse on this computer with no issues. Help!!!
 

A:Blue Screen when plugging in USB device

You may be a victim of this update; if you have it just uninstall it >>

http://support.microsoft.com/kb/973879/#knownissue
--------------------------------------------------------------------------------------------
I can run a debugging utility on the dump files if you do this:

1 > create a new folder on the desktop and call it "dumpcheck" or whatever you like
2 > navigate to c:\windows\minidump and copy the last few minidump files to that folder. *this assumes 'c' is your boot drive, if it is not, subsitute accordingly
3 > close the folder and right click on it and select Send to Compressed (zipped) Folder.
4 > use the "manage attachments" in the "advanced" reply window to upload that zip file here as an attachment.

This might point us to a non Microsoft driver causing the error, if one exists for it.

If you do not see any minidumps, be sure you are not using any cache cleaner such as CCleaner. Also run sysdm.cpl and select Advanced > Startup and Recovery. Make sure "small memory dump" is the one chosen under "write debugging information" and the location should be %systemroot%\minidump
 

Read other 1 answers
RELEVANCY SCORE 52.8

Whenever I plug something into the USB Slot I get that horrid blue screen error message and my computer restarts. It is a 2.0 G Memory SD card reader that i'm needing to plug in for some coursework but... I cant!

Whoever can help,


I praise thee new lord.

A:I keep on getting the "Blue Screen" whenever I plug ANYTHING into the USB Slots.

Is sp2 installed? If not do so, see what happens...

Read other 7 answers
RELEVANCY SCORE 52.4

men i keep getting this Unaccessible boot device error even after i have swapped out hard drives three times and it won't let me even format.

A:Unaccessible boot device/blue screen

Did you try another cable?
"won't let me even format"
How are you trying to format the drive?

Read other 6 answers
RELEVANCY SCORE 52.4

I've been using my boyfriends computer which has some problems, which I managed to improve slightly by updating AdAware and installing Spybot and deleting as much crap as I thought I could get away with (his files, nothing originally on the computer). But lately its been running slower and the problems have gotten worse again. The system is continuously restarting itself without any prompting from me. Following this, one of two messages comes up:

"Reboot + select proper boot device or insert boot media in selected boot device and press a key."

or, the blue screen,

"A problem has been detected and windows has been shut down to prevent damage to your computer.

DRIVER_IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware of software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:

*** STOP: 0x000000D1 (oXF78A383B, oXooooooo7, 0X00000001, oXF74EDD51)

sptd.sys - Address F74EDD51 base at F74EC000, D... Read more

A:Boot Device/Blue Screen Messages

cmos reset
turn the computer off
remove the power lead from the back
take the side off
remove the cmos battery
move the cmos jumper from pins 1 and 2 to pin 2 and 3 and the back to pins 1 and 2
reinsert the battery
put the side on
replug in the power lead
boot the computer

there can be 2 solder points you touch with a screwdriver
2 pins you touch with a screwdriver or use a jumper
a cmos clear switch or button
there will be a diagram and instructions in your manual

check for leaking or swollen capacitors on the m/board

run

chkdsk /r

what are you running
video card
cpu
m/board
ram
power supply
brand
wattage

check the listings in the bios for voltages and temperatures and post them

Read other 1 answers
RELEVANCY SCORE 52.4

Update: Here is the SF information:Attachment 26227
My laptop is Dell Inspiron 14 Z with 8GB RAM and Core I5, Amd 7570 HD, 500G HDD + 32GB SSD

The problem is very interesting. It happens several time instead of every time. When I am trying to use USB device to transfer files from other computer. Sometimes it shows that "the USB device cannot be recognized, please blablabla". Once this information appears. whatever USB things I use to insert, the laptop has no reaction. And when I try to shutdown or restart, the "Restarting" will keep rowing like 3~5 mins and then it turns to blue screen. The "Power state failure" error. Today it appears three times cuz I want to root my nexus 4. However, every time my phone reboot with connecting laptop. It will shows the error. I use the hardware scanner provided by the dell computer. And the result shows everything is fine. Here is one of the dump files says.
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
subsystem.
Arg2: 000000000000012c, Timeout in seconds.
Arg3: fffffa801f7e0040, The thread currently holding on to the Pnp lock.
Arg4: fffff801e7997810, nt!TRIAGE_9F_PNP on Win7

Here are all the dump files I have until now. Please have a look and help me. I do some research in this forum, how ever, I didn't find answers.

Atta... Read more

A:Windows 8 USB device blue screen, DRIVER_POWER_STATE_FAILU

Please provide this information so we can provide a complete analysis: Blue Screen of Death (BSOD) Posting Instructions

The last 3 memory dumps blame vmusb.sys - which dates from 2009. It's probably not compatible w/Win8, so please uninstall the program associated with it:
vmusb.sys Tue Sep 1 07:52:14 2009 (4A9D0AEE)
VMWare usb client driver
http://www.carrona.org/drivers/driver.php?id=vmusb.sys

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ckldrv.sys Thu Mar 18 19:10:27 2010 (4BA2B2E3)
CrypKey software
http://www.carrona.org/drivers/driver.php?id=ckldrv.sys

appdrv01.sys Mon Oct 31 07:41:10 2011 (4EAE8956)
Searches return "Starforce copy protection driver"
http://www.carrona.org/drivers/driver.php?id=appdrv01.sys

rtcrfilt64.sys Thu Dec 1 04:43:09 2011 (4ED74C2D)
Realtek Turbo Mode Filter driver
http://www.carrona.org/drivers/driver.php?id=rtcrfilt64.sys

Analysis:
The following is for informational purposes only.

Code:
**************************Sun Aug 11 09:37:10.868 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\081113-8000-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628... Read more

Read other 3 answers
RELEVANCY SCORE 52.4

I got randomly this error on blue screen: igdkmd64.sysThe machine has 1 month of using and it got this error since 3 or 4 days from first start.I tried to reinstall video-card drivers or to install Intel HD graphics drivers... but still the same error.How can i solve this issue? Thanks

Read other answers
RELEVANCY SCORE 52.4

My desktop computer was struck by lightning last month and every since then, it's been on a blue screen loop whenever I start up the computer. It gives me the Inaccessible Boot Device error. None of the troubleshooting solutions work (system restore, system image recovery, system repair, UEFI firmware settings, go back to the previous version) nothing works. The drive is fried. The drive was even switched from C: to X:

I was told by tech support that it's not damaged severely because it's still able to turn on and boot up. but I would need to reinstall windows completely. They offered to sell me the recovery disk but I am looking for another option.

I have downloaded Windows 10 to my flash drive and tried to boot Windows that way but when I got to the stage "Where do you want to install Windows?". The box is empty and I clicked load driver, the USB drive showed up on the list under Browse but I kept getting an error saying "No signed device drivers were found. Make sure that the installation media contains the correct drivers..." when I clicked USB Drive (C, ESD-USB (D and Boot (X

I went to HP's website to download the storage drivers for my desktop on my flash drive thinking that would do the trick but that did not help.

I have no clue what I'm doing and I'm basically taking bits and pieces of information from the internet to try to come up with a solution but the frustration has set in because I had my computer set up to... Read more

A:Inaccessible Boot Device - Blue Screen

You appear to actually have a HP 251-a123w Desktop PC (N0B07AA).
It was introduced in September 2015 in the U.S.A. and came with Windows 10 Home 64-bit.
What's the exact serial number and product number on yours?

If you go HERE and follow the instructions, you can purchase a USB recovery media kit for it.
Using it will revert that desktop back to its original new condition, along with all the drivers, programs, etc. that came in it.

If you go HERE, you can download the Media Creation Tool, then use it to download Windows 10 Home 64-bit, then create a bootable USB thumb drive or bootable DVD.
Using it will install Windows 10 Home 64-bit, but you then will need to install the needed drivers and programs afterwards.

You admit to not being computer-knowledgeable, so you'll probably need someone who is to help you.

--------------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 51.6

I have a one year old all in one pc.I got the harddrive not found 3F0 error.HP support sent technician to my house to replace the harddrive. This obviously came with all new windows. Clean pc.About one one week later I received the same message again.Rang HP support and they said they will resend the technician to replace the harddrive agian as it must have been a faulty harddrive.I just don't believe the harddrive is at fault. The harddrive is brand new and works if you plug the harddrive into another pc. The only thing I had time to install in the week was Norton antivirus software.What else can cause this error?

A:Boot device not found 3F0 error blue screen

HI @totallynumbered, how do you do ? Realize this test of document below for certified about this error: HP Notebook PCs - Boot Device Not Found Error or Hard Drive Not Detectedhttp://support.hp.com/us-en/document/c01443463 Unfortunally, if this error persist, do you need send this notebook to the enginner replace the hard drive.  I hope that helps !Can I ask you a favor ?If the question is clarified, mark my answer as "resolved" and click on the icon of the "hand" to provide "congratulations" in recognition.Have a nice week !Im a volunteer in the HP Forum ! 

Read other 1 answers
RELEVANCY SCORE 51.6

Hi

Tried to boot my PC today and received the above message with the error code 0x0000007B (0x85E4C6D0, 0xC0000032, 0x00000000, 0x00000000)

Suggests i run chkdsk but i cant get into windows to do this.

Asus K8S-MX Motherboard, running windows 2000. Maxtor Hard Drive 6Y120L0.

The boot up on the Asus start up page takes a lot longer (10 secs instead of the usual 2 secs)

Maxtor Powermax 4.23 ran. Passed install confirmation, basic test and advanced test.

Can anyone help me - i am self employed and the computer holds all my records!!!

Thanks
 

A:Solved: Inaccessible Boot Device - Blue Screen

Read other 14 answers
RELEVANCY SCORE 51.6

Blue screen device/driver causes computer to restart please help....Logfile of Trend Micro HijackThis v2.0.2Scan saved at 7:06:21 PM, on 9/1/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v8.00 (8.00.6001.18702)Boot mode: NormalRunning processes:C:\windows\System32\smss.exeC:\windows\system32\winlogon.exeC:\windows\system32\services.exeC:\windows\system32\lsass.exeC:\windows\system32\Ati2evxx.exeC:\windows\system32\svchost.exeC:\windows\System32\svchost.exeC:\windows\system32\Ati2evxx.exeC:\windows\Explorer.EXEC:\windows\system32\spoolsv.exeC:\Program Files\ltmoh\Ltmoh.exeC:\windows\AGRSMMSG.exeC:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exeC:\Program Files\McAfee.com\Agent\mcagent.exeC:\Program Files\Java\jre6\bin\jusched.exeC:\windows\RTHDCPL.EXEC:\Program Files\AIM6\aim6.exeC:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exeC:\windows\system32\ctfmon.exeC:\Program Files\Java\jre6\bin\jqs.exeC:\Program Files\InterVideo\Common\Bin\WinCinemaMgr.exeC:\Program Files\McAfee\SiteAdvisor\McSACore.exeC:\PROGRA~1\McAfee\MSC\mcmscsvc.exec:\PR... Read more

A:Blue screen device/driver causes computer to restart

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine.??If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine.??Please perform the following scan:Download DDS by sUBs from one of the following links.??Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool.??No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 51.6

I read a post while not registered about debugging, and did it and here is the information, can anyone look at this and help me trouble shoot why when i disconnect any USB device, my computer crash's to Bluescreen. Brand new dell computer, and two devices that have caused issues so far are external usb hard drive, and usb dongle linksys wireless card.
Microsoft ® Windows Debugger Version 6.11.0001.404 X86
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Fatty\Desktop\Mini082609-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6001.22477.amd64fre.vistasp1_ldr.090722-0700
Machine Name:
Kernel base = 0xfffff800`01a12000 PsLoadedModuleList = 0xfffff800`01bd4db0
Debug session time: Wed Aug 26 06:14:26.540 2009 (GMT-6)
System Uptime: 0 days 3:06:03.269
Loading Kernel Symbols
...............................................................
................................................................
............
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* ... Read more

A:USB device disconnects causing Blue screen issues.

You may have been hit by the same error that thousands (or hundreds of thousand) of others have...Try the steps located here: http://www.techerator.com/2009/08/fix-wind...indows-updates/I read a post while not registered about debugging, and did it and here is the information, can anyone look at this and help me trouble shoot why when i disconnect any USB device, my computer crash's to Bluescreen. Brand new dell computer, and two devices that have caused issues so far are external usb hard drive, and usb dongle linksys wireless card.Microsoft ? Windows Debugger Version 6.11.0001.404 X86Copyright ? Microsoft Corporation. All rights reserved.Loading Dump File [C:\Users\Fatty\Desktop\Mini082609-01.dmp]Mini Kernel Dump File: Only registers and stack trace are availableSymbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbolsExecutable search path is: Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (2 procs) Free x64Product: WinNt, suite: TerminalServer SingleUserTS PersonalBuilt by: 6001.22477.amd64fre.vistasp1_ldr.090722-0700Machine Name:Kernel base = 0xfffff800`01a12000 PsLoadedModuleList = 0xfffff800`01bd4db0Debug session time: Wed Aug 26 06:14:26.540 2009 (GMT-6)System Uptime: 0 days 3:06:03.269Loading Kernel Symbols...........................................................................................................................................Loading User SymbolsLoading unloaded modul... Read more

Read other 1 answers
RELEVANCY SCORE 51.6

I have a Z50-75 Signature Edition laptop from the Microsoft Store. I have upgraded it to 16gigs RAM and 1TB SSD both Crucial. I installed Windows 10 Pro and when I am playing World of Warcraft on this laptop intermittently it will get the thread stuck in device driver error. When I went to upgrade the hard drive to the SSD in the BIOS I had to change the SATA type to compatible for the drive to work. Things I have tried so far.1. Fully uninstalled the video device and driver software in device manager and add remove programs.2. Tried just installing the driver from Microsoft.3. Tried just installing from Lenovo.4. Tried the drivers from AMD. Each time doing a full uninstall of the device and software then rebooting. I guess my question is this a video driver issue or could it be another driver that is causing this issue.If it could be another driver then how can I find out what driver is causing the issue? Here is what my event viewer had on the error. The computer has rebooted from a bugcheck.  The bugcheck was: 0x000000ea (0xffff9d0adfa6f080, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: de41580c-212b-4eba-8d0e-67f469f38e63. Any help would be appriciated. Thank you.

Read other answers
RELEVANCY SCORE 51.6

AV: avast! Antivirus *Enabled/Updated* {2B2D1395-420B-D5C9-657E-930FE358FC3C}
SP: avast! Antivirus *Enabled/Updated* {904CF271-6431-DA47-5FCE-A87D98DFB681}
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
FW: ZoneAlarm Free Firewall *Enabled* {E6380B7E-D4B2-19F1-083E-56486607704B}
Microsoft Windows 7 Home Premium

Motherboard: Gigabyte Technology Co., Ltd. | | M68MT-S2P
Processor: AMD Sempron(tm) 145 Processor | Socket M2 | 2800/200mhz
.
==== Disk Partitions =========================
.
C: is FIXED (NTFS) - 466 GiB total, 434.903 GiB free.
D: is CDROM ()
F: is Removable

Update for Microsoft Office 2007 (KB2508958)
Adobe Reader 9.5.0
avast! Free Antivirus
HP Photo Creations
HP Photosmart 5510 series Help
HP Update
Malwarebytes Anti-Malware version 1.60.0.1800
Microsoft Office 2007 Service Pack 2 (SP2)
Microsoft Office Access MUI (English) 2007
Microsoft Office Access Setup Metadata MUI (English) 2007
Microsoft Office Enterprise 2007
Microsoft Office Excel MUI (English) 2007
Microsoft Office Groove MUI (English) 2007
Microsoft Office Groove Setup Metadata MUI (English) 2007
Microsoft Office InfoPath MUI (English) 2007
Microsoft Office OneNote MUI (English) 2007
Microsoft Office Outlook MUI (English) 2007
Microsoft Office PowerPoint MUI (English) 2007
Microsoft Office Proof (English) 2007
Microsoft Office Proof (French) 2007
Microsoft Office Proof (Spanish) 2007
Microsoft Office Proofing (English) 2007
Microsoft Office Proofing Tools 2007 Servic... Read more

A:Computer goes to blue screen and dumps memory when I try to add new device

Moved from VM forum at request of VM staff. Judged to be not a malware issue. Deleted most of logs.
 

Read other 1 answers
RELEVANCY SCORE 51.6

I've had this computer (ThinkPad R60e, WinXP Home SP3, 1.83 GHz 1 GB RAM) for years and its never had this kind of problem before: whenever I insert anything (thumb drive, camera, iPod) into the a USB port the computer goes into a blue screen of death saying "PAGE_FAULT_IN_NONPAGED_AREA" and "STOP: 0x00000050". I've noticed that with certain things like my external harddrive, it works fine if its plugged in while the computer boots, but not if inserted while its already active. I'm really not sure at all what could be causing this, I haven't changed anything drastically about the computer in quite a while. The only thing I can think of is my antivirus program (McAfee VirusScan Enterprise 8.5i) just recently found a trojan and I then did a full scan to get rid of it completely. Any ideas what could be causing this? Thanks!

P.S. I've search the forums already and it seems a few people have had this problem (like http://forums.techguy.org/windows-nt-2000-xp/437651-blue-screen-usb.html), but I don't see that anyone has really solved it.
 

A:Solved: Inserting a USB device causes blue screen of death

Read other 12 answers
RELEVANCY SCORE 51.2

Hi there,

This is my first post in the forum. It is nice to meet you all

I have crashed twice in last two days with the BSOD. My computer is a three week old Dell Dimension 9150 Pentium D dual core processor with 1 gig ram.

The two BSOD messages were different. The first started RQL_NOT_LESS_OR_EQUAL with the message if this is the first time restart the computer, + a few suggestions from disabling bios memory options like caching or shadowing (that I didn't know how to do). The technical information was:-**STOP:0X0000000A (0x00650065, 0x0000001C, 0x00000000, 0x8050177F
Beginning dump of physical memory, physical memory dump complete.

Microsoft online crash analysis came back with - Error caused by a device driver, but there was no indication of which. No device driver showed in the BSOD. I looked in the system hardware and there were no exclamation marks or no other equipment etc.

The next day the same thing happened again, only this time there was an indication where the device driver problem was:-

The message this time was - **STOP: 0x0000008E (0xC0000005, 0xBF80D2F1, 0xF7721778, 0x00000000

** Win32k.sys - Address BF80D2F1 base at BF800000, Datestamp 43446a58

I had a looked at the system event log and application log but nothing out of the ordinary was logged at the exact time of the crash. There were errors there mostly to do with Fax machine which I never have installed

I did a search for Win32k.sys (inc hidden files and folders) and ca... Read more

A:Blue Screen of Death - Error caused by Device Driver. Please help if you can.

your minidump file is under a folder called minidumps located in your windows directory. You will have to zip the file and upload it so we can analyze it.
In the current format we cannot read it.
 

Read other 9 answers
RELEVANCY SCORE 51.2

Hp 4530 probook blue recovery screen infintr looping /device needs repaired uae tools/boot configuration missing dataI tried all repair optionsNow weekday

Read other answers
RELEVANCY SCORE 51.2

I keep on getting blue screen crashes and when I try to boot my computer
It says please select proper boot device, I called gateway tech support because
I have a gateway desktop and they guided me through restoring the computer
To factory defaults everything worked and it booted up properly and then it started
Automaticay updating and such, as windows 7 would then all of a sudden another
Blue screen crash hit me and it restarted the computer and the "Please select proper boot device"
Error message appeared again I called techsupport once again and they said they could helpme because
There's a problem with my operating system and it would cost 99 dollars for that one problem
Please help me!
 

A:Blue screen crashes, please choose proper boot device

This sounds very much like a problem with the hard drive.

Can you get it to boot into Windows at any time or is it permanently showing this error.

Do you have another PC with a CD burner that you can use and a blank CD or Flash Drive?
 

Read other 3 answers
RELEVANCY SCORE 51.2

Hp 4530 probook / windows 10/blue recovery screen infinite looping /device needs repairedwitg installation tools/boot configuration missing dataTherefore Windows won't loadrecovery/restore/command ## access how?How do config Bios / Uefi boot...whats the fix???Hello please!##I tried all repair optionsNow weekday

Read other answers
RELEVANCY SCORE 51.2

Hello,
System
I have Windows 8.1 pro and using it for usb connected data acquisition device (http://www.ti.com/tool/ADS1232REF) 
Error:
system_thread_exception_not_handled wdf01000.sys 
Minidump Files:
https://1drv.ms/f/s!AuM-lBN7DfOkqnGL9T3R52KpZB0b
Any help would be appreciated,
Thanks, 
Alexei.

Read other answers
RELEVANCY SCORE 51.2

i keep getting blue screen, the report said that i should update the computer to Windows Vista Service Pack (SP1) but im on (SP2),

ive just had a sound card added but the problem didnt start then so i dont think it's that. could it be that my vista is corrupt?

ive lost my back copy for vista. i removed finepix from my pc a while back.

Blue screen error caused by a device or driver

Description
Windows installed driver software that supports the basic features of your FinePix Z10fd. Its manufacturer may provide software that enables additional features.
Problem signature
Problem Event Name: PnPGenericDriverFound
Architecture: x64
Hardware Id: USB\VID_04CB&PID_01DA&REV_0100
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Extra information about the problem
Bucket ID: 90402970
"Before you try the troubleshooting steps in this article, you should update your computer to Windows Vista Service Pack (SP1), which includes many important updates that help improve the reliability, performance, and security of Windows Vista. In addition, it might solve the problem that caused the blue screen error on your computer."
shut down unexpectedly

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 2057

Extra information about the problem
BCCode: 4e
BCP1: 0000000000000099
BCP2: 0000000000010987
BCP3: 0000000000000002
BCP4: 0000000000010958
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Server information: 8c830363-... Read more

A:Solved: Blue screen error caused by a device or driver

Read other 15 answers
RELEVANCY SCORE 51.2

Stop (blue screen) error caused by a device or driver for windows xp home editionthere are NO showing for this fix.any input??getting fed-up of this problem

A:Stop (blue screen) error caused by a device or driver

Hi and welcome michprnt - If you are able to, can you follow the directions below -Please do the following as it will provide us with more information.Please download BlueScreenViewNo installation required.Double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.Thank You -EDIT for link -

Read other 1 answers
RELEVANCY SCORE 51.2

Blue screen error caused by a device or driver

You received this message because a hardware device, its driver, or related software has caused a blue screen error. This type of error means the computer has shut down abruptly to protect itself from potential data corruption or loss. In this case, we were unable to detect the specific device or driver that caused the problem.
Okay iam running windows xp....ive been having problems with my pc forever and i can never seem to work out if its bad ram or a memory issue. Anytime my pc is running for a long period of time it seems to hang and give me the blue screen, if i try to run a media program or burn a cd or anything along those lines it hangs also....What could this problem be? do i need to let someone look into my system or can it be resolved at all.

Ive had every error msg i believe...it seems to always tell me its a device error when it hangs or when i reboot it gives me that msg and then reports the problem..

Any help would be gratful...by the way ive run scans and all sorts, theirs no virus or anything, i run a and anti virus program by AVG.

cheers.
 

A:Blue screen error caused by a device or driver!!! Help Needed

Read other 16 answers
RELEVANCY SCORE 51.2

Have a Lenovo H50-55. Clean Install Windows 10 64-bit. I used Lenovo Companion to install all updates. Have everything up to date including the latest Chip and Video drivers. I am using the newest Raedon Crimison ReLive and i am getting every once in a while a Blue Screen of Death with Device Stuck in Driver. I searched up and i am finding that it has to do with the Raedon software or the chipset driver. So i unistalled everything. Now. Listen. When i bought the computer it came pre-installed with software including the AMD Catalyst (NOT the Crimison!) I would like to re-install that version of Catalyst into my computer. I would appreiate it tons if someone could tell me what verison that was and the chipset driver for it and where i can find it. I want the EXACT same one. I want that version because i didn't suffer BSoDs with that software. Also. It's a bummer that i can't get a recovery disc or a chance to download the recovery software on to a USB. That sucks awfully. If anyone can please help me. Anyone have the pre-installed software? Can someone point me out to the versions? ------------ Also a question about the Lenovo Companion. I noticed that when i updated my computer using the application it installed a AMD Chipset Driver version 9.0.000.6. FOR the life of me i can't find anything on the web about that driver. It also installed an AMD folder that included tons of files and a file called AMD Install Manager. I click it. I... Read more

A:Lenovo H50-55 Blue Screen of Death (Device Stuck in Driver)

Or at least can someone tell me what version of catyalst goes with that chipset driver version 9.0.000.6? Please i beg you! Those BSoDs are annoying. I don't care if i am not up to date with the latest software. I want stabilitly over unstability. I play Minecraft and Skyrim in medium settings anyways and just surf Youtube. That's all. I don't play demanding up to date games.

Read other 1 answers
RELEVANCY SCORE 51.2

I am encountering frequent 'blue screen' reboots on my Windows XP SP2 System. Upon reboot, I get an online crash diagnosis indicating that I have a problem with an 'unknown' device driver. Any ideas on how I can diagnose and correct this problem?
 

A:Blue Screen Reboot due to unknown device driver problem

need to get more info. there should be a list of hex (00E000BF) blah de blah that would be helpful in diagnosing it. Also, a few things:

1. have you added/removed any hard/software recently?
2. how long has this been going on?
3. Does the blue screen stay up long enough to read? If not, right click my computer, go to advanced, startup and recovery, and make sure that the 'auto reboot' is unticked'.
4. How far in the reboot can you get? Can you get past POST? BIOS? Can you get all the way to windows?

the more ammo, the more likely someone here can kill this problem, to coin an analogy.

v
 

Read other 2 answers
RELEVANCY SCORE 50.4

i am using vhs to dvd my vidbox capture device after i record it is in
16:9 anamorphic i am using wondershare filmora to edit out the commercials
should I use 4:3 or 16:9 to convert the video the video is 720x480
 

A:capture device help

Read other 11 answers
RELEVANCY SCORE 50.4

I just bought a capture device to capture gaming on my Xbox as well as capture live tv (high light reels) its called easycap USB 2.0 video with audio.. I have 2 laptops one xp 7 years old one vista 4 years old...clean plenty of space on each... I have two different problems, on xp it only records 10 seconds then says no signal imput no device selected, clearly I have a device selected oem USB driver... Second with vista it says cannot start capture graph.. I searched awhile found an updated driver for vista but when I try to update the oem driver it says driver is up to date and won't let me use new driver (1160) I could be off a number don't quote me I will get back to you on that... So I'm lost and out a few bucks with my website launching Tuesday you can see I'm sweating bullets over here any help would be welcomed I will check this thread hourly, please no bickering I need answers not complaints about the product, that gets me nowhere.. Any info you need from me just ask... Easy cap USB 2.0, ulead video studio, xp, vista, splitters, easycap USB oem....

A:Help with a capture device

Hi and welcome to TSF see if this helps Instructions for EasyCap DC60 on XP Home | Chron.com

Read other 18 answers
RELEVANCY SCORE 50.4

Hi everyone,
I have a belkin video capture device ,it operates from a usb 2.0 connection .
My problem with it is it will only capture in black and white.I sent it back to belkin support for testing and they sent it back to me saying it worked ok in colour on their system but they gave me no answers to why it did not capture in colour on my system except to try another vcr which i have done but it still captures in b/w.
I have to let you know i go to tools and options to select pal
my system is a compaq evo p4 1.5ghz 256mb 20gig harddrive which has had all drivers updated to try to solve b/w problem the belkin capture device is modle number: F5U228 any help to resolve this problem would be appreciated
thanks dla******
 

A:capture device

It maybe something in set up that is missing, have you tried the online tutorials from Ulead to help you. http://www.ulead.com/learning/vs.htm
 

Read other 2 answers