Over 1 million tech questions and answers.

T540p Internal Display stopped working

Q: T540p Internal Display stopped working

My internal display just stopped working for no reason with Windows 10. The external monitor still works fine though.I checked the Device manager, the internal display had disappeared from the Monitors section, only my external monitor was listed there.It had happened twice. I brought the display back the 1st time after I uninstall the monitor driver and re-installed the latest driver from Lenovo website, but this time it's already with the latest driver and the same trick did not work.Luckily I still have a clone image of the system with Windows 8.1. Once I switched back to Windows 8.1 the internal display worked fine so I think it has to be a driver issue.The display adpater is Intel HD 4600. The internal monitor is the original HD display that came with the laptop. Please help.

Preferred Solution: T540p Internal Display stopped working

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: T540p Internal Display stopped working

Hi Paulgti,

Welcome to Lenovo Forums.

Consider updating the Intel HD Graphics from the Intel Website. Also, check if display fine when you connect with external monitor.

Please update the following

Let us know how you get on.


Tap that Kudos button if I helped If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Read other 5 answers

Hi community, we are using several Thinkpads for years mostly without issues. But for a while now we have to experience issues with our T540p's in combination with pro and ultimate docks. And lately we also run into the same issue with a T570.Here our configuration, there are two external displays connected to the docking and one of them is the primary screen.And this is the issue: When we undock the T540p, the internal display should switch to be the primary and only display, but it doesn't. It seems to be that the T540p is still thinking to have external displays connected. The internal display is all black but I can move the mouse pointer from the right into the screen and can also move it out of the screen by pulling it downwards.All windows are opened on the virtual screen,which means I cannot see any configuration windows to change display behavior. Pressing Fn+F7 and up or down arrow blind does not change anything.It does not matter if I undock the T540p while it is running, or if I shutdown the system before undocking. When this error occurs it also does not matter if I connect an external display to the T540p directly, I still cannot see anything. To set the internal display to be the main display before undocking does not change the behavior anyway.If I put the T540p into the docking again, mostly everything is fine. The two external displays are running as before. If it was a desktop PC that would be fine but it is a notebook and we need to carry it with us an... Read more

Read other answers

I turned off my machine and when I came back to it the internal display wouldnt ork. Using an external monitor right now to type this, internal LCD reacts to brightness commands, but displays no image, just a black screen. This is true throuhgout the system, even at boot it displays nothing.This was working fine until 15 minutes ago. I'm desperate, cannot afford a new computer Any help appreciated

Read other answers

Hi, I have a T540p with Windows 8.1. I did all configurations needed, Windows is working. Also internal Microphon and F4 key were working fore month.Problems:- Internal Microphon stopped working- F4 key does not function any moreHow can I solve these problems? Thanks a lot!

A:T540p: Microphone & F4 Key stopped working

This update might fix your hotkey issue Hotkey Features Integration for Windows 10 (32-bit, 64-bit), 8.1 (32-bit, 64-bit) - ThinkPadReadme.txthttps://download.lenovo.com/pccbbs/mobiles/r09vu09w.txt Hotkey Features Integration File Downloadhttps://download.lenovo.com/pccbbs/mobiles/r09vu09w.exe To check you microphone, right click on the speaker icon in lower right of the task bar, and select recording devices.   Once the recording device window opens, make sure that the microphone is enabled, and if not, right click on the microhpone and select enable.    If the Microphone is not shown, right click anywhere in the window, and select "show disabled devices" and then enable. Good Luck 

Read other 1 answers

Hi, I'm new here, but I've no ideas how to solve my problem so I've decided to post here. My touchpad stopped working (as usually here) but, gestures are working fine (on windows 7). I've tried everything, reinstall drivers, update SMBus (I know, that SMBus drivers have something common with touchpad), but touchpad still no poiting. Also, I've tried to install/boot linux, and for my surprise, there is working everything - pointing and gestures etc.. What should I do ? How to fix it ? I've also tried another touchpad - same issue. Adding screen of settings of my touchpad. Any idea guys ? Help pls. :/ Driver version: by windows in: PS/2 mouse port Synaptics SMBus Driver: I've also tried to install older driver - not working - UltraNav 18.07.40, ... 

touchpad.png ?64 KB

Read other answers

Yesterday out of nowhere my fingerprint sensor just stopped working, doesn't turn on, doesn't show up in device manager, I have disconnected it reconnected it nothing... Lenovo Vantage no drivers... I need to know what is going on. Someone, please help.

Read other answers

My thinkpad T540p Display backlight is not working, when i connect to External display am getting output. any way to fix the isssue ? the laptop is under warranty. 

Read other answers

Hi guys! I'm really having a bad time, my laptop is currently unusable since the backlight is not working on either the TN panel or IPS panel that I have for it. when I first got the laptop it worked fine, allthough it ran a bit hot 65c idle. So I decided to change the thermal paste for with some Arctic Silver MX-4 and the idle temps dropped to 43c idle, a very nice improvement if you ask me. Then I decided to change the awful TN panel that it came with since I've done that a thousand times before with other laptops, so I went ahead and ordered one from eBay (it came from UK) since I did not want to risk some china panel potentially breaking my precious new laptop. when I got the new panel, I turned off the laptop then removed the battery and pressed the power button for 30 seconds, then porceeded to take the bezel off and remove the "old" working display and install the new display. No problem.... or so i thought... There was only a black screen when i booted it back up!turns out that the backlight was not working (I was shining with a flashlight and getting a picture on the monitor itself)I then did the same procedure and replaced the "new" monitor(IPS) with the "old"(TN) still no backlight... I really needed it for my school, so I went to a local PC-repair shop that could fix things such as laptop. thay said that there was 3 possibilities:broken monitorbroken motherboard (GPU is soldered on motherboard)borken cable from motherboard t... Read more

Read other answers

I have a dell laptop inspiron  3558 with intel core i5 with win 10 ...this morning all of a sudden its internal speakers stopped working after i  unplugged my headphones ..I have used headphones before multiple times with no problems ...in audio settings it shows the speakers are enabled and the sound bar is moving but theres no sound ..I plug the headphones back or external speakers  ,those are  working ..troubleshoot is telling me the inbuilt speakers are working fine and cannot detect any problem ..I tried reinstalling the audio driver ,then restarting , then updating with the new Microsoft hd audio driver ,stopped all enhacements restarting again ,still not working ...is this a mechanical problem or a software problem ? I barely had this laptop for 4 months ...will reinstalling windows solve the problem or what should I do ? is the sensor not working ?

Read other answers

I have a gateway NV55s24u, my webcam was working fine, then all of a sudden when I click on my webcam it says "No webcam detected,try plugging one in, or if you are using an integrated camera, try turning it on" I noticed when I went into device manager that my imaging device (lexmark x422) has yellow triangle symbol with an "!" right in the middle. When I click on the device under the general tab it says "this device can not start, (code 10). Is this related to my webcam? If so how can i fix this error? I have gone to many different websites trying to fix this problem. WHAT SHOULD I DO, HELP PLEASE!!!!

A:Internal webcam stopped working!!!

lexmark x422 refers to a Lexmark printer/scanner, not a webcam. Try re-installing the Lexmark drivers for that device.

If your webcam is not listed in DeviceManager, and if the Lexmark X422 is the only device with an error symbol, it means the webcam itself is faulty or broken. Out-of-warranty repair on laptops is very expensive, you can avoid that by buying an external webcam.

Read other 1 answers

Hi,the internal microphone worked for months. Then suddenly it did not work any longer :-( The recording device window tells me that there is no recording device installed at all. - How to install the internal microphone?- What are the steps to install the internalmicrophone?Thanks for any advice! 

Read other answers

Hi there -- oh, I so hope you can help me.

ETA: I am running WinXP Pro, on a Pentium III machine with 16.7 GB HD.

I have an IBM Thinkpad laptop with an internal Hitachi DVD-ROM player. It's not an R/W. Yesterday afternoon, it played a DVD movie just fine. Then I ejected the movie, put in another, and PowerDVD claimed "no disc in drive d:". So I went back to the first movie that'd worked seconds before -- no dice. "Please insert a disc in drive d:" it says. I tried Windows Media Player, Media PLayer Classic, even WinAMP. None are able to acknowledge that there's a disc in drive d. I tried audio and data discs as well, also nothing.

SO. I went to Device Manager and tried to Troubleshoot the device -- it claims it's functioning properly. I then uninstalled the device and the driver, rebooted, let Windows detect them, and reinstalled. They reinstalled perfectly, and Device Manager still claims the device is functioning properly. Still, the drive will not acknowledge that it has a disc in it.

While searching online for help I learned that this might be caused by...improperly assigning master/slave controllers to my internal DVD drive and my external CD/RW. I uninstalled and reinstalled my Secondary IDE Controller (on advice from a website troubleshooting tutorial), which reinstalled just fine, but I'm unable to figure out where in that device I can find out if my master/slave assignments are correct. Other web tutorials suggested I... Read more

A:internal DVD player spontaneously stopped working!

You are like many that I run across, just cannt believe that you have had a HW failure.
If it was working and then just stopped working you have had a HW failure.
Replace the drive.
All that device manager can tell you is that the device is communicating, not if it is working.

Read other 3 answers

A few days ago my internal microphone stopped working and though I hadn't used them for a while so can't be sure it was at the same time so did the USB's..... An external mic still works and the system seems to want to make it the default mic I have tried most of the methods decribed on here to get them back - unistall and reinstall drivers etc.(no yellow exclamation marks) This happened when I was on Windows 7 and thought when I upgraded to Windows 10 a couple of days ago it would solve it but it didn't.Product name: HP Pavilion g6 Notebook PCProduct number: A8J56EA#ABUWindows 10 Home 64-bit  Device Manager screenshot below ......thanks and fingers crossed. 

A:Pavillion G6 internal microphone and USB's stopped working

Hi @spudseven,I hope you enjoy your visit to the HP Support Forums. I understand you are having an issue with the mic with Windows 10. I will be glad to help you. Please look at Hp documents for Resolving Microphone Problems (Windows 10, 8). Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below!  Thanks.

Read other 5 answers

I have a T540p that I am having unusual issues with the internal mike with.  It first showed up when attempting to use Skype and the internal mike would not pick up my voice.  All settings, both Lenovo and Skype, were checked and are set to the recommended ones.  In the course of troubleshooting this with the Skype audio panel open, I noticed that if I ran my finger across the top of the screen border where the camera and mike pickup are located, the Skype sound bar (green bars) would enlarge to the right as if it were picking up sound OK, but when I would use my voice, nothing moved on the Skype sound bar.
When I have the Windows sound app open, I can also see green bars appear on the mike indicator when I speak, but again, nothing seems to go out that is picked up by the mike.
Any ideas to resolve this would be welcomed.
Moderator comment: Model added to subject for clarity.

Read other answers

My Hp Compaq 6710b was working fine when suddenly during a song it stopped working, I can still hear the sound with headphones in best quality but can not hear it without it. I am using windows 7Ultimate, 32bit. Please help, i m really worried.... I also have updated the driver from Hp Site, but still, it is same.


Check your volume mixer under the notification area, check your speaker settings to see if its on mute or turned down.

If everything is normal, go into the device manager and look under sound, video, and game controllers.

What are listed? And is there any exclamation or red x?

Read other 1 answers

Hello, The front internal Camera my Lenovo X1 stopped working 3 weeks ago.When I open the camera app it says the camera is not detected. I cannot find anything related to the camera in my device manager. In the control panel I have it set so my camera is not using any privacy settings and I use norton Anti-virus and they claim to not interfere with the camera.  I reinstalled the drivers from the Lenovo website and they still dont work. Can someone please help? Although I have a registered warranty with Lenovo I am not successful in getting intouch with their online customer support, so I am on this forum.  Thank you. 

Read other answers

Hello! Sorry, im new around here! :S

Basically, my HP DV6-3065EA running Windows 7 Home Premium (x64) laptop died. I went into a computer shop and asked how much a simple diagnostic test would be to find out how much a repair would be. He quoted me ?90. Phew, jog on! That wasn't going to happen!
Anyway, I decided to replace the power jack. No hard job, just a simple unplug and plug back in job. (looks abit like this Hp power jack image by chikyeung on Photobucket). I replaced it; everything is running fine.
I tried to put a USB pen drive into a usb socket. Didn't work. Tried another, didn't work. I have tried several devices and they all work on other computers but don't seem to be working on mine.
I have been trawling the internet for answers, and as of yet, nothing -.-! I wouldn't call myself a novice, trust me, I've tried everything, uninstalling and reinstalling all of the USB drivers, checking bits of the registry.etc. Nothing. So today, i thought, right, WIPE THE COMPUTER! I backed up everything, went back to scratch.
Tried another USB, didn't work.! Im completely puzzled!

Please help!!!

Thanks for reading! ;D

Oh, one more thing. When the laptop was unusable, I removed the hard drive and put it into another computer to retrieve some files. Could this have anything to do with it?

Any help is greatly acknowledged!!

A:USB Ports Stopped working after an Internal Power Jack is replaced.

It sounds rather as if your new part somehow isn't diffusing 5 volts to the correct circuits, which is what USB relies upon. Could be a bent pin or misaligned plug on those pins, or a broken wire.

Read other 2 answers

Anyone install the "ThinkPad USB-C Dock - Type 40A9" and be able to maintain the use of the internal Realtec Microphone Array? I'm at the end of my ability to diagnose it.  Drivers and device manager settings all look enabled and correct but I lose ability to use internal mic.

Read other answers

Hello, I have a L512 where the integrated webcam had a fault that was causng a BSOD. Neiter updating the driver or disabling the camera helped so I decided to disconnect the camera. As I was doing that the internal display fell forwards and the cable was pulled out the back of the screen. I reconnected it but the internal display would then not work. So far I have tried the following: - replaced the screen cable (as I thought the connector must have been damaged when it was pulled out)- replaced the screen (same reason as above)- reset the BIOS to defaults including making sure that Thinkpad LCD is set as the boot display- updated the BIOS- updated the video driver- confirmed that the lid close switch is working (the laptop goes into sleep mode when the lid is closed)- Fn + F7 seems to work in terms of switching the video output but nothing displays on internal screen- internal screen is off completely, not just very dim Any ideas about what the problem might be and what else I can try? Thanks in advance Guy  

Read other answers

Hello!Some weeks ago the sound stopped working on my Dell Inspiron 3521. I can hear sounds when i connect headphones or speakers. I had windows 7 and i thought that the problem could be solved if i updated to window 10, but it didn't work. My drivers seem to be up to date. Is it a common problem on theese laptops or it might be a hardware problem? Please help!

Read other answers

hi there ,

i have recently installed vista ultimate x64 and since the fresh install i have been recieving an error message saying that display.exe has stopped working, this doesnt affect anything appart from there being a flashing error at the bottom of my screen, at least i think thats all it is. I have a Nvidia Geforce 7600 GS on an asus k8v-x mobo and AMD 64 3000+. Does anyone know what the problem could be and how to sort it, thanx in advance

Read other answers

hey people, im new here so b gentle haha

basically, ive been using 2 displays, a 17" lcd monitor and my 40" samsung hdtv.
i use my 2nd display(TV) for when i watch films on my pc, then select back to normal single display once i have finished(it annoyed me the pointer would go off screen onto the 2nd display when i wasnt using it) and it was working fine like this for ages, then 1 day i activated 2nd display as normal, but it wouldnt reconise it what so ever.

ive tryed reconnecting all the wires etc but it still doesnt reconise the 2nd display??
all i can think is maybe some kind of update has changed settings and made it not reconise it?

and help would b greatly apprieciated?

A:2nd display stopped working?

hello, and welcome to the forums!
maybe you could try and uninstall and then reinstall the drivers for the graphics card?


Read other 3 answers

HP My Displa   my display has stopped working.

Read other answers

hey peeps, im new here so please b gentle

right, basically, i had 2 screens set up, main is a 17" lcd monitor and 2nd is a 40" samsung hdtv connected thru s video.
i use 2nd display when i watch films on my pc as its better thru tv, but when i wasnt watching films i would set it back to just single display as it annoyed me when the pointer would get lost off screen on the 2nd display.
it worked fine for ages then 1 day i tryed enabling 2nd display and it just wouldnt work, doesnt even reconise it, ive tryed disconecting and reconecting wires etc, i can only think maybe an update or something triggered it??

any advice would b greatly apprieciated


A:2nd display stopped working

I'm going to ask a few questions to help get acquainted with the issue and your hardware;

1: What OS are you running?
2: Do you know what make/model video card you have?
3: Does your video card have a DVI (White, rectangular connector) output?
4: How many outputs does your video card have in total?

Read other 3 answers

I continue to receive this message after upgrading to Win 10.  I'm not sure what the SW does, but my monitors "black" color is not as vivid as with Win 8.1 -- other colors are not quite as bright either.  How do I get HP My Display back?  HP My Display has stopped working

Read other answers

I get the message - "HP My Display has stopped working. A problem caused the program to stop working correctly. Windows will close the program & notify you if a solution is available." What do I need to do to correct this - if anything.

Read other answers

Hi please help me as well as I am having the exact same problem. I am unable to connect an external laptop to use my screen via the HDMI cable.

A:Re: HP Envy 34c - HP My Display has stopped working

Hi there @boowah, May the Forums be with you!  I understand that you are trying to use your 34c display with your laptop computer.  I am happy to give you a hand with this. What is the model# of the laptop you are trying to use? Are you getting any error messages on the display when you try to output to the 34c? Also please see HP ENVY 34c Media Display - Product Specifications. What is the maximum resolution supported by your notebooks display adapter? Please let me know when you can.

Read other 1 answers

Firstly, my Nvidia GTX560 got this problem since my friend made my PC. It used to get the error (NVIDIA windows kernel modedriver <driver version> has stopped working but recovered). I tried updating drivers and it didn't work. I then changed to windows 8 and still got the error but also getting the error 'dxgi error device removed/hung' (see my other posts). I then swapped my graphics card with my friend if it solved the problem. He had an amd radeon and I still got the error 'amd display driver has stopped working but successfully recovered' but this time when crashing, sometimes my display goes off as if it is disconnected (but it is connected). When crashing it has a buzzing noise and sometimes has a distorted blue screen. Could anyone please help as I have been getting so many errors on my PC constantly? Thanks a lot! [MINIDUMPS and info attached]

Read other answers

I've got win vista home premium 32
Last night Suddenly BOSD or blue screen of death occurs to my laptop which caused my display drivers stopped working
I've formatted C: drive, Updated my BIOS, Installed new drivers , but nothing works start up took around 15-20 minutes

Please Suggest any solution for that

A:Display Driver Stopped Working

Hi Notin

Could you confirm what the machine does when you boot it up please? Does it get as far as allowing you to log on?


Read other 2 answers

So, the display was working till the afternoon when I decided to clean the computer. So i plugged all the cords out of the computer and put it on the carpet. I opened it and then I used a Duster 2 for the computer says (Removes dust from electronic equipment) which is the computer. Well, when I plugged back in everything the display would no longer show up. It would say No input connection for hdmi input.I am using a Ibutpower computer and I think it has to do with the dvi import for the computer. Now I might have sprayed too much of the Dust 2 inside should I wait a few hours before rebooting?Also, when I hit menu on the monitor it just says (monitor going back to sleep) so it won't let me factory reset.Any ideas on how I can get the display to work?

Read other answers

Recently my HP MY DISPLAY software has stopped working.  This is the softare that allows me to use the advanced features of 34" curved display.  I have downloaded all of the drivers/software on the support page but it hasn't helped.  I have uninstalled them and reinstalled and it has not helped.  When I try to open HP MY DISPLAY a messge pops up that says "Enumerating Display Devices phase 1" , then a large moving circle displays like it is waiting.  Then I get the error messge "HP My Display has stopped working". Any ideas?

Read other answers

hi,i downloaded flightgear.org but it wouldnt play, said i needed a more poweful graphics card and also not supported by open gl driver. i had a radion hd3450 3d card installed with appropriate upgrade to memory.it still wouldnt play game so i deleted flight gear completely and installed a microsoft flight simulator.
now i get...ati 2 dvag display driver has stopped working normally. and when i try to play a normal game i hear the music but black screen and no curser movement.when i turn the comp off i get a message stating.
vpu recover has reset your graphics accelerator card as it was no longer responding to graphics driver commands.
but it hasnt,so ive spent my money and my comp can read emails etc but no games etc at all.
ive looked at other peoples tales of woe and hope mine is solvable.!!!
thanks...(hopefully) in advance

A:display driver has stopped working normally

First thing to try is System Restore to a date before ypu installed Flightgear

Read other 3 answers

display driver has stopped working Will try to get exact error message next time happens fairly regular on a new Geforce 9500gs.
This is driving me crazy just installed 64-bit home premium because the 32-bit oem made explorer crash my rig is pretty new hard ware wise the components don't have over a year of use yet.however could it be something with the bad install of 32-bit I wiped the whole drive?

A:anyone have a fix for display driver has stopped working

I would uninstall the driver (e.g. in Device manager) and reboot. Hopefully the system will find the last driver by itself.

Read other 8 answers

Hello, has anyone ever seen this error:
The ati2dvag display has stopped working normally. Save your work & reboot the system to restore full display functionality. The next time you reboot the machine a dialog will be displayed giving you a chance to upload data about this failure to microsoft.

A:Please help!!! ati2dvag display has stopped working normally.

What was in that dialogue when u rebooted?

Read other 2 answers

I have a GTX 970 Zotac Extreme Core Edition and the updated drivers. When I first installed the updated driver it doesn't crash as much when time flew by it crashed when I am watching something or playing. The only solution to this problem is by rolling it back and using the driver in the CD that my video card provided. I want to use the updated drivers.

Read other answers

New problem with my Gateway M-6750 Laptop/Vista Home Premium 32bit. "Display Driver has stopped working & since has recovered." It started about a wk or so ago, & it only happens when I plug in my cpu & unplug my cpu from any power source, like a wall or car....etc. Any suggestions & any questions, feel free to ask. Thanx

A:Display Driver has stopped working.....?

Well in my desk top system (might be different) mine would do that when got to hot. Turned fan speed up I havent seen it again.
Also heard of this if OCed to high.

Read other 3 answers


I have some problems with some games. It's one of those black screen -> ''Display driver atikmdag stopped responding and has successfully recovered'' (-> Game crash) Errors

Some games work fine, but some start messing too often so it has become unplayable. What can i do to fix this problem or at least find out what's wrong?
I heard it's a Vista problem. is it?

PC Specs:

Intel Core 2 Duo E4500 @ 2.20GHz
3GB RAM (1x 2GB, 1x 1GB)
Club3d HD4850 512mb Overclocked Edition (Latest drivers)
580W PSU
Asus P5LD2-X/1333 Motherboard

Windows Vista Home Basic 32-bit

Let me know if you need more information.

List of games, in which i have gotten this error:
Dark Sector (Very often, Crashes the game, Sometimes even BSOD!)
Riddick: Assault On Dark Athena (Very often, Crashes the game)
Call Of Duty 4 (rarely and successfully recovers and i can continue playing)
Terminator: Salvation (Often, Crashes the game)
Warhammer Online: Age Of Reckoning (Very Often, Crashes the game)
And there's probably many more games....

A:Display Driver Has Stopped Working

Read other 9 answers

Ive been using an external monitor along side my winxp HP laptop for months via a VGA cord. I decided to connect my tv to my laptop using the same VGA cable and it didnt work. so i plugged it back into my laptop and that no longer worked as well!
took 30 seconds for my monitor to become useless.
Ive bought two other VGA cables thinking maybe my tv fried the cable, but still nothing works.

i don't think its drivers because it worked fine one minute and didn't the next. No signal is going to the monitor at all. no sign of the monitor even being connected.
anything i can do? Thanksssss.

A:2nd display monitor stopped working?

It sounds that more than likely the VGA port going out from the laptop was switched off during one of the changes. Most laptops now have a shortcut to turn this port on (since I believe it is off by default to save power) For example, mine is Fn+F5. What kind of laptop you have will determine this shortcut key. What is the model of the HP laptop are you using?

There might also be something wrong with the monitor though that is very unlikely. Does the monitor power on still and simply go into standby due to no signal? If the monitor has multiple inputs, it could be trying to find a signal from one of the other inputs. There should be a menu option to make sure the monitor is on VGA.

This is likely what was wrong with the TV as well, either it was looking at the wrong input or your laptop wasn't giving the proper output.

Hope this helps.

Read other 1 answers

I have a GTX 970 Zotac Extreme Core Edition and the updated drivers. When I first installed the updated driver it doesn't crash as much when time flew by it crashed when I am watching something or playing. The only solution to this problem is by rolling it back and using the driver in the CD that my video card provided. I want to use the updated drivers.

A:Display driver has stopped working.

Hi if the driver that came on cd is not causing issues just use that and wait for another driver update. Are you having any problems with the driver that came with the card if not don't fix something that's not broke.

Read other 6 answers

Occasionally I'll be watching a youtube video (this only happens in fullscreen), and it will freeze up and I can still hear the audio. After 2-3 seconds it will resume and in the bottom right it displays something along the lines of "AMD display card stopped working and has recovered". A few times I've even got the VIDEO_SCHEDUALER_INTERNAL_ERROR on the BSOD.

I checked and the drivers are up to date. Any suggestions?

A:AMD Display Driver Has Stopped Working

Hi there,

have you had these issues all the time? Or did they just start happening after a driver update from AMD? It's not always wise to update the videocard drivers. Sometimes newer versions introduce new issues.

I for instance also have an AMD videocard. All drivers newer then 13.1 result in a crash in 40% of the time I close Internet Explorer.

So, what I'm trying to say is. Try to downgrade your AMD drivers to the latest version where you didn't have this issue.

Good luck with it!


Read other 17 answers

Hi everyone,
About a week ago, my laptop's brightness key stopped working.
It's not a hardware problem because if I try changing it from control panel I fail. Brightness icon disappeared into windows 10 home x64 1151 as well as control center.
I tried reinstalling both Intel and Nvidia drivers.
the machine is an Acer E5-571G-50NS upgraded to Windows 10 about a year ago.
Thanks in advance,

A:Display Brightness key stopped working

When you say you 'fail' changing brightness in the control panel do you get an error message, what do you mean?

Is your PC fully up to date with Windows Update?

Read other 4 answers

Dear sir plsss help me out when i start a app or game error shows DISPLAY DRIVER HAS STOPPED WORKINGi updated the display and graphics driver done full reset the windows but still same issue

Read other answers

Re: Windows 7 O/S. Lately, while playing a game on Gamesville. I get a freeze and then a white screen on the whole face of my monitor and then the graphic returns and I see a balloon pop-up that says. Display Driver stopped responding and then it recovered. Is this something that is "going" on my computer or is there something I can/should do? Thank You.

A:Display Driver Stopped Working

It's not dangerous, relax. Install fresh drivers for your graphic card. What type of graphic card do you have?

Read other 4 answers

So, the display was working till the afternoon when I decided to clean the computer. So i plugged all the cords out of the computer and put it on the carpet. I opened it and then I used a Duster 2 for the computer says (Removes dust from electronic equipment) which is the computer. Well, when I plugged back in everything the display would no longer show up. It would say No input connection for hdmi input.I am using a Ibutpower computer and I think it has to do with the dvi import for the computer. Now I might have sprayed too much of the Dust 2 inside should I wait a few hours before rebooting?Also, when I hit menu on the monitor it just says (monitor going back to sleep) so it won't let me factory reset.Any ideas on how I can get the display to work?

Read other answers

Whenever i use windows movie maker, photo gallery etc my screen would flash black and then a message would come up saying " AMD display driver has stopped working and has successfully recovered occasionally it would go to the blue screen.
I have a AMD Radeon HD 6320 graphics display driver.
Ive tried uninstalling recent updates and updating the driver but apparently ive already got the most up to date driver.
im using windows 7

give me some solutions please ??

need help

A:Display driver has stopped working

please check the temperature with hwmonitor and upload a picture.

Read other 5 answers

Hello, I bought a new computer some months ago and at first I could play games fine, but when I started trying some other games those wouldn't work. Later, when I played more of some games, after a while they stopped working, saying "the display driver has stopped working", and now I found myself unable to play any game for any reasonable length of time.
Some, like for example Atilla Total War, I cannot even start to play them, I cannot get to the 3d.
I have Windows 10 64bits, a Nvidia Geforce GT730 and 8gb of RAM, and a microprocessor of 3.30 ghz. I have even trouble playing football games of 2009, after a while the pitch disappears and I cannot play any longer.
Any help would be inmensely appreciated.

I have tried increasing the response time, making sure I am using the dedicated graphics card and uninstalling the drivers and reinstalling them (WHQL) with no change.

This is what the Windows event viewer says of the error;

Faulting application name: Attila.exe, version:, time stamp: 0x56675acc Faulting module name: Attila.dll, version:, time stamp: 0x56675ff9 Exception code: 0xc0000005 Fault offset: 0x01a88a22 Faulting process ID: 0x19a0 Faulting application start time: 0x01d20923f0b1cafc Faulting application path: C:\Program Files (x86)\Total War Attila\Attila.exe Faulting module path: C:\Program Files (x86)\Total War Attila\Attila.dll Report ID: 10aea5b5-8720-421f-af17-de31adfd74f2 Faulting package full name: Faulting package-relative a... Read more

A:Display driver has stopped working - what can I do?

Read other 7 answers