Over 1 million tech questions and answers.

Updating my BIOS

Q: Updating my BIOS

I've been trying to update my BIOS as I realised how old the driver is, but I useless, as they tell me to download programs that cost and I just cannot be bothered to go through all that.

Could anyone give me a link to where I can just download an update please?

RELEVANCY SCORE 200
Preferred Solution: Updating my BIOS

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Updating my BIOS

Try here, this is the driver page for your computer model number listed in your specs. Notice the OS says Vista but if its a BIOS update the only relevance of the OS is weather the flash utility will run in Windows 7. All the other drivers listed are for Vista. This could be the correct BIOS for your machine but a second opinion would be most welcome to confirm.

P.S Run at your own risk as we all know the risks of incorrect BIOS updates. Check the motherboard show to be P5LP-LE before flashing.

Read other 2 answers
RELEVANCY SCORE 53.2

I have downloaded the bois from the lenovo official site. But when I am updating its show the error message not for this notebook . I have lenovo g500s laptop .other people also facing same issue for the same laptop .please help ...Thanks in advance...











Solved!
Go to Solution.

A:Lenovo g500s bios updating problem. While updating...

Pan761,
 
The correct version of BIOS update has been just released - BIOS Update for Windows 8.1 (32-bit, 64-bit)
 
Now there should be no problems with it's  installation.
 
Regards,

Read other 1 answers
RELEVANCY SCORE 49.6

AMD Dual Core processors - updating BIOS?

how do you do this?

thanks a lot
 

A:AMD Dual Core processors - updating BIOS/flashing BIOS?

Flash a BIOS?
You need to download the update from the motherboard manufacturer. Then follow the directions in the readme file that usually comes with it.
 

Read other 3 answers
RELEVANCY SCORE 49.6

Hi. I have a dell inspiron laptop. My problem starts when i tried to update my bios from a07 to a15. While the update is running my laptop screen suddenly turned blank but my laptop is still on. What should i do?

A:Bios update fail. Blank screen while updating bios

Please check and see if you can get into BIOS. By the way list Dell model number and version of window. Ex: Dell Inspiron 3543, windows 10
1. Power off computer
2. Power on computer, quickly start tapping F2 key continuously. Hopefully, you'll be able to see BIOS screen.

Read other 1 answers
RELEVANCY SCORE 49.2

hi there, i am fixing a friends old computer and the hdd was stuffed so i got a new maxtor diamondmax 9 for it. although once installing it i found out that it would only run in udma2 mode (checked it in another computer and it ran at full udma6)
so i suspect that the current bios cannot support udma5 or 6, so i am looking for a bios upgrade for it.
the bios string is 6A69RPRDC-00, the number on the actual motherboard is 35-C960-00-05
thanks for any help, i am really hoping i can make this board work at udma5 at least and not have to settle for udma2.
thanks again
-Moltenz

ps. i just found this
AM-960
04/19/2001-i815-ITE87X2-6A69RPRDC-00 ITE87X2 + Winbond-W39A
at http://www.plasma-online.de/english/identify/serial/mainboard/mb_aristo.html
if that is any help.
 

A:help with updating bios. cannot find bios upgrade - 6A69RPRDC-00

WOW..............

Old Machines.....(just like me... but can still perform to the max lol)

I your Bios has the option of udma up to 6 then generally the bios supports the Mode! and your problem is that the HDD does not support the mode (cant remember if you said it does).

You are probably using wrong criteria for bios upgrade search.
Try WWW.driverguide,com

You Need the MB's Manufacturers Name or at least the MB Chipset and bios Manufacturers Name as well. go to the Computers muanufacturers website (you probably done that already) and search model.

otherwise Download a System info utility from Tech Spot, I use SiSoft Sandra or AIDA32.. (sandra might cause bluescreen on older machines).. Aida problably will have link direct to bios update site. hope this was of some help
 

Read other 9 answers
RELEVANCY SCORE 49.2

Hello.I need to update BIOS on my notebooks.I used my second computer to creat  a BIOS recovery drive on my USB.I used this way:Recovering the notebook BIOS using an external storage devicehttp://support.hp.com/us-en/document/c02693833 I download recommended version:sp62234.exeAfter step "5. In the Location to Save Files window, click Change."The HP System BIOS Update Utility DOSENT opens and i have 2 errors: 1.IHISI: Get support mode fail in SMI!  2. BIOS did not support InsydeFlash!  Please help me.

Read other answers
RELEVANCY SCORE 46.4

i updated my bios and the fan is now very loud on it for some reason , im not sure why here's my belarc advisor list if anyone can help me get the fan back to normal that would be very helpful!

Windows XP Professional Service Pack 2 (build 2600) Packard Bell NEC SPIRIT 550
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.93 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache Board: Packard Bell NEC
Bus Clock: 133 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 07/15/2005
Drives Memory Modules c,d
80.02 Gigabytes Usable Hard Drive Capacity
63.95 Gigabytes Hard Drive Free Space

COMBO IDE5232CO [CD-ROM drive]
SCSIVAX DVD/CD-ROM SCSI CdRom Device

Apple iPod USB Device [Hard drive] -- drive 1
ST380011A [Hard drive] (80.02 GB) -- drive 0, rev 8.01, SMART Status: Healthy 480 Megabytes Installed Memory

Slot 'A0' has 512 MB
Slot 'A1' is Empty
Local Drive Volumes

c: (NTFS on drive 0) 80.02 GB 63.95 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
ashley 12/4/2005 4:57:52 PM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never
Marks a disabled account; Marks a locked account None detected
Controllers Display
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
SiS PCI IDE Controller None detected
Bus Adapters Multimedia
VAX... Read more

A:BIOS HELP!!!!!! fan very loud after updating bios

Read other 16 answers
RELEVANCY SCORE 46.4

hiiam new to this so forgive me if i have posted in the wrong placei own an hp 250 g4 recently i updated my bios and after successful update i tried to enter bios and its asking for admin password but i never has set any admin passwordit says system disabled  [ |  87228416] i can normally boot into my os but cant enter the bios plz help me 

A:asking for bios password after updating bios

When prompted for password try 38180438

Read other 2 answers
RELEVANCY SCORE 44.8

I just got a 250Gb Western Digital Hard Drive and it is read by the computer but it won't let me access it. I was told that updating the BIOS might help, but i am not sure how to accomplish this. If you have any other idea on what might help or how to update the BIOS plese let me know. Thanks in advance for any help given
Stephen
 

A:updating BIOS

Read other 15 answers
RELEVANCY SCORE 44.8

I want to update my BIOS with a .bin file. I have extracted and saved to a bootable disc. But when prompted in MS-DOS i have no idea what to type in to JUST open the .bin file that needs to run so i can update the BIOS. Thanks a lot... Dave
 

A:Updating BIOS

Read other 14 answers
RELEVANCY SCORE 44.8

Hiya doin' CHILL here, I need to know how to update my BIOS for my E-machine W3623 System. The BIOS is very outdated (7/29/2005) which I think maybe causing certain performance issues I have been having. I at least want to have the most recent BIOS running for the machine (for optimal performance) which I have already looked into (which is the Coconut Creek CR94510J[1].15A.1015 2009). I realize this update MUST be downloaded straight from the manufacturer ONLY or I could risk screwing myself over.

I downloaded the file from the E-machines support site. Problem is, when I try to run it I get the Intel Express Update Set-up screen which comes up and then it says "This program is unable to continue. Internal System Error: This is a programming or internal problem." After that I can't continue and the process automatically shuts down. So now I'm stuck and don't what know to do. Here is some more information about my system:

Operating System: Windows 7 Ultimate 64x
Intel Express Family Chipset 82945G
RAM: 2GB

Also another side question: Is this unit capable of more RAM than 2GB? Thanks in advance and I would GREATLY appreciate any help I can receive on this as I am lost. Let me know if you need anymore specific specs on the system.

A:Need BIG help with updating BIOS

Welcome to SevenForums,

Performance issues aren't necessarily fixed up updating the BIOS. You are running a fairly low-spec PC so I wouldn't expect the performance to be outstanding. What sort of issues are you having? There may be easier way to fix this.

That is the correct BIOS update - how are you flashing the BIOS?

Unfortunately, your machine supports a maximum of 2GB only.

Regards,
Golden

Read other 9 answers
RELEVANCY SCORE 44.8

How do i update my bio i can't seem to find anything to help me

A:Updating the Bios

@Dctchdt,If the original OS was WIN 7, the BIOS is tied to that.  The is "NO" WIN 10 BIOS.

Read other 1 answers
RELEVANCY SCORE 44.8

I need to update my Motherboard Bios. I found the site and downloaded the Bios file. I was cautioned by the Motherboard site to first make a copy of my existing Bios. Just how do you do this? How do you get to look at the Old Bios to copy the file name down or even copy it to a floppy?
I'm runnging Win 98 SE on a new ABIT motherboard.
 

A:Bios Updating

Read other 9 answers
RELEVANCY SCORE 44.8

I  recently acquired a gem of ancient tech-- it is a used hp envy 17-1191nr--  a few changes from stock, however is that it has a new 250GB SSD, 16GB of RAM, and is running windows 10... but one small problem...I think it needs a BIOS update because of the behavior it has when I leave it in sleep mode, it doesn't like to wake up.I have a habit of leaving it asleep but the boot from shut off is not long at all (about 15 seconds or less) What happens is that the keyboard backlight comes on and it seems to be trying to wake up but fails and I think the speakers make a slight pop noise, and then it keeps repeating thatMy 'fix' is to remove battery and power and then re-insert and it starts up again, no problem.Reading on-- I read that it would likely be either the BIOS or the battery. Tonight I did a test with a spare battery and same thing happens.. my co-worker and he said it may be the BIOS too.  My other concern is seeing that the date on my BIOS is also from 2010 (F.1B) and the newer one from HP's website is F.1D from 2011... and that my BIOS is booting from Legacy rather than UEFI.... I'd like to know how to update the BIOS, because I tried changing the BIOS boot order and it doesn't seem to work to get it to boot to CD or USB, when I attempted to change the order, it just tells me to remove CD or USB and press any key to boot normally. This is my system info, if anyone knows what I need to do... I don't plan to jump the gun here and risk brick... Read more

Read other answers
RELEVANCY SCORE 44.8

I want to update my bios to see if that helps my rebooting problems(See thread below). The only problem is, I'm unsure which upgrade is for my bios. I have an AX4TII mobo. When I run the app HWInfo32 I get this info on my bios:

Vendor: Award software international
Version: 6.00 PG
Release date: 01/02/2002
Start Segment: E000
Size: 512 KBytes

This link is to my mobo's site and their bios drivers:

http://club.aopen.com.tw/downloads/...eyword&sel=category&optionfun=typefun&first=1

Which one is mine?
 

A:Updating bios

Read other 10 answers
RELEVANCY SCORE 44.8

How risky is bios updating. asus sabertooth x58

A:Bios updating

ocir, your motherboard site shows that the latest bios is:
Sabertooth X58 1304 BIOS
2011.09.26 update

I would download the update and most bios system updates have a choice to accomplis from booting a disk
or from the Windows OS.
Choose which you want to do,

I have done this lots of times, mostly from Dell but also intel and asus.

Rich

Read other 5 answers
RELEVANCY SCORE 44.8

My motherboard is http://www.prlog.org/10116200-new-a...-motherboard-uk-online-computer-reseller.html

And i cant find the right bios to update it.

any1 know which bios is for my motherboard to update it?
 

A:Updating BIOS

http://www.asrock.com/mb/download.asp?Model=P4i65G
 

Read other 3 answers
RELEVANCY SCORE 44.8

I have a laptop in the shop and one of the things the tech is doing is updating the BIOS, he said they were way out of date. It got me to wondering, should I be updating BIOS on my other computer? is it something I can do? I don't really understand that part.
 

A:Updating BIOS

Check the PC (or motherboard) manufacturer's web site to see if there is a firmware update for the BIOS. If there is read the notes to see if you think that the fixes or improvements are worth it. Updating the firmware is doing a brain transplant so in the unlikely event that something goes wrong there will probably be no recovery.

Yes, you can probably do it, depending on the procedure given.
 

Read other 3 answers
RELEVANCY SCORE 44.8

I bought a Yamaha CDRW and my system won't recognize it. It was suggested that I upgrade my BIOS to fix this problem. I have an Asus P2B Motherboard and when I downloaded the update, all I got was a Fax Viewer Document, not what I expected. Do I really need to update the BIOS? I am using Win 98 SE.

I have checked all the IDE cables and all configurations.......do I have a paperweight?
Any help would be great!

Rattzo
 

A:Updating BIOS

Depends on how old your bios are. If it's the last chance

Anyway here is link to your motherboard page
http://www.asus.com.tw/Products/Motherboard/Pentiumpro/P2b/index.html

You can just click on the link for the bios and get the upgrade, whichever you want, with or without hardware monitoring.

Have you tried the burner in another machine just ot see if the burner is good.
Differnet cable
Different power connector
Different master slave settings on ide's
 

Read other 1 answers
RELEVANCY SCORE 44.8

I am having problems using a 200gb drive with an older (2002) gateway. I installed the HD and ran fine for a few months, then I got the the disk read error. I used old drive to load windows and reformatted the 200gb drive, and the it worked fine for another couple months.
I have changed IDE cables and tried everything else but updating bios. So I am currently trying to update the bios with no luck.

My bios readout is as follows
bios rev PT84510A.15A.0005.PO3.0203061931 DATE 03/06/02

I went to gateway website and entered my serial number for the update and found the update for 12/2002, not that current. But i tried it and follwed the directions exactly. the floppy would not work, i got the nonsystem disk error.

Any suggestions for properly updating my bios?
 

A:updating bios

Read other 14 answers
RELEVANCY SCORE 44.8

While I"'m installing software downladed from your website, it shows IHISI: Get suppport mode fail in SMI. and then BIOS didn't support insyde Flash

A:BIOS is not updating

We need the exact model number of the laptop and identification of the BIOS update you are trying to install. 

Read other 1 answers
RELEVANCY SCORE 44.8

While updating BIOS..when my laptops restarts it stops with a blank screen and caps lock starts blinking two times

Read other answers
RELEVANCY SCORE 44.8

Hi,
its a bit lengthy and might not seem a really general question; but I guess Im only asking for basic understanding here:

Im occasionally getting the error 13 :
: The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.

I thought I would do a bios update. I googled it and found this,
when I go to the manufacturer website (here) , I cant see any batch file that the manual mentions, instead there is exe files to updating the version of bios. when i download and run them, I get the error saying that the file didnt install properly and if i want to redo it with the recommended setting. I tried checking the version of the bios externally with a software and it seemed its still the previous version. I tried reinstalling the update using the new settings, same old same old.
note: in the sony website it says:
This BIOS update must be installed before upgrading to Microsoft? Windows Vista? operating system. ( the computer was shipped in xp)
I have missed it.
anything I can do?

cheers,
Shahab

Read other answers
RELEVANCY SCORE 44.8

I asked this question on another website forum and the only answers I got was to buy a newer computer. This is just a spare I am wanting to get running. I have an old Compaq iPaq tower with a Pent III 733MHz processor. It has no floppy or CD rom drive and only supports the slim hot swapable cd rom drives. It has Windows 2000 on it and I am wanting to install Windows XP or a Linux OS via USB. It has Bios ROM (686J5) V 2.08. which doesn't support booting from USB. I am wanting to upgrade to V 2.10 which does support a USB boot but I am having alot of trouble understanding if it's possible to flash the Bios without first installing the files on a floppy and running?? Here is a link to the 3 V 2.10 flash utilitys but I don't know which to choose and the instructions for each 1 are very confusing for me.
http://h20000.www2.hp.com/bizsuppor...eriesId=96490&swLang=8&taskId=135&swEnvOID=19
There is no clear setup to run and I've tryed the DOS instructions and that doesn't work? Any help would be greatly appreciated.
 

A:Help updating Bios

http://h20000.www2.hp.com/bizsuppor...g=8&mode=2&taskId=135&swItem=PSG_I10480-31135

need the flash utility first
but yes confusing !!
 

Read other 2 answers
RELEVANCY SCORE 44.8

I have a dell dimension 4550 and i was wondering if i have the best BIOS.. i think it was A05 or something like that.. pllz give link if you there is a better one..
 

A:updating BIOS

Read other 6 answers
RELEVANCY SCORE 44.8

Hello!

My OS is Win7 ultimate 32-bit.
I have an Asus P5LD2-X/1333 motherboard. I used to have a Intel Pentium Dual-Core 1.80ghz. Today I installed a Intel Pentium Dual-Core 2.50ghz E5200. It's running just fine, without any software updates. However when starting the PC I get the following message:

Unknown CPU detected. Update BIOS to unleash it's full power.
Fress F1 to continue.

As I said, Windows runs just fine. But I feel like I should update the BIOS (or should I really?).

After 2 hours of failed attempts to update it, I find myself here. The update file i got from the Asus site is a .rom, so I can't run it with Windows.

So what have I done?
First I created a bootable flash drive with the .rom file on it using windows's tools (cmd > diskpart) as fat32. When trying to boot it (after I changed the boot order) I get a message saying "Remove any storage or media". When I use the BIOS's EZ Flash I get the following loop:

Checking floppy...
nothing found!
Checking CD...
nothing found!
etc etc

I tried the same, this time with ntfs - same results.

Then I did the same, this time making the flash drive bootable with Rufus. The results are mostly the same, but this time when I boot it, I get a flashing "_" at the bottom left of the screen. It stayed there for 6 minutes and I eventually lost patience. Should I have waited more?

Final note: I had been using a 2gb and a 4gb flash drive. Just now I've read that I have to use a f... Read more

A:Help updating BIOS

Bear in mind that if you screw up a BIOS update, it's very easy to turn your pc into a doorstop.

Read other 2 answers
RELEVANCY SCORE 44.8

Mod Edit:  Split from http://www.bleepingcomputer.com/forums/t/580653/windows-81-black-screen-with-cursor/ - Hamluis.
 
I got the same thing except I'm pretty sure a virus wiped out the BIOS (Basic input Output System) I got a update Bios based on my model on a USB and am currently trying to figure how to load it through EFI Shell, which is simular to DOS i guess

A:Updating BIOS

Please explain what is going on with this computer.
 
Does it run at all?
 
What makes you believe your BIOS is infected?

Read other 1 answers
RELEVANCY SCORE 44.8

I need to update my BIOS. It is American Megatrends Inc. 1009.003, 9/5/2005. I went to the American Megatrends website, but couldn't find what I needed. How should I go about this?
 

A:Updating BIOS

Read other 13 answers
RELEVANCY SCORE 44.8

I recently put in a new motherboard, a new cpu, and new ram. the computer POST is fine but when it gets to the load windows screen, it just reboots. there is no error, just flashes to a blue screen, then restarts the computer and when it restarts it comes to the screen asking me to choose between restarting in last known good configuration, or in 3 different safe mode options. all of them just repete the process. i tried reinstalling the windows from the boot cd and it reinstalled it fine with no errors, but when it restarts the computer it still wont get passed the load screen. Someone sugested that maybe i have to update my BIOS becase of the new motherboard and new cpu. can someone please explain why that might be, what the symtems are of needing a BIOS update, and why it would help me? im just looking for some clarification before i run such a risky procedure. thank you, kevin
 

A:Updating BIOS

Did you reinstall windows after fitting that lot? If not, thats your problem.
 

Read other 41 answers
RELEVANCY SCORE 44.8

when im done building my pc and installing the os, do i need to download all the updates for the bios that were released? or just the most recent one. because im confused that if i download the most recent update, it wont fix all the bugs that the updates before it fix
 

A:updating bios

Read other 8 answers
RELEVANCY SCORE 44.8

My board is Asus M2A-VM HDMI. Latest version bios is avilable ie. HDMI1401. Kindly help me to update. I dont have a floppy drive. I want to do through CD. What r the steps to update
 

A:Updating Bios

Hello kunjikaly and welcome to Techspot.



While BIOS flashing can be done with CD ROMs on some newer motherboards, this is not recommended. This is because BIOS updating works at the core level of computing functions.Click to expand...

Taken from here by Tedster.

Regards Jase
 

Read other 6 answers
RELEVANCY SCORE 44.8

Board: ECS K7S5A 1.0
Bus Clock: 66 megahertz
BIOS: American Megatrends Inc. 07.00T 04/02/01

Thats my motherboard spec, i recently aquired a amd athlon 3000+ but my bios only sees it as a 1500 / 2100 + so want to update my bios but am very unsure and wary on doing so, from the official site ive found the utility and update but as my bios version says 1.0 and the update only says 3.0 and above im not sure if itll work, does anyone know what i should do?

Thnak John
 

A:Updating Bios

Read other 14 answers
RELEVANCY SCORE 44.8

how can i update my BIOS? sisoft sandra claims that my BIOS is old and needs to get update...

General Information
Manufacturer : AT/AT COMPATIBLE
Version : Award Modular BIOS v4.51PG
Date : 06/16/98
Plug & Play Version : 1.00

Performance Tips
Tip 201 : System BIOS is old. Check for an update.
Tip 200 : SMBIOS/DMI Interface not supported. Check for a BIOS update.

I just can't find an update from the internet...plz help!!!
 

A:updating BIOS

Most manufacturers have updated BIOS on their websites for download. If it is a custom build, the motherboard manufacturer will have one.

It is not usually necessary to update BIOS unless you have a particular issue that the update resolves . .

wrs
 

Read other 3 answers
RELEVANCY SCORE 44.8

I am not sure and want to know if I need to update my BIOS.

This laptop is 2 years old, and is running all well. I haven't had any crashes etc. But I am wondering if updating the BIOS will prolong my machine's life.

Here are some screenshots which give basic info. about the laptop in question.







PS I didn't like the idea of paying more than 20 quid for their yearly subscription.

A:BIOS updating

Unless the BIOS update corrects a problem that you're having, then I wopuld leave well alone. These updates are usually to enable the motherboard to support newer hardware such as processors. Since yours is a laptop, you wouldn't be able to upgrade anyway, so I would leave it as it is.

Read other 5 answers
RELEVANCY SCORE 44.8

Hi, i've been told a bios update might stop my pc crashing when my belkin wireless is plugged in. only thing is i'm confused as to how to do this!
System analysis says i have american megatrend BIOS, a asus motherboard SE Deluxe, but my boot up screen says Fast track Promise technology.
where do i get the right bios update? which oen will eb the right BIOS? and is it likely to stop the random crashing?!
questions, questions, questions!
Please help/advise!!
thanks,
Mikelo
 

A:BIOS updating

Read other 7 answers
RELEVANCY SCORE 44.8

I need to upgrade my BIOS in an attempt to hopefully fix my new video card. I have a Phoenix ROM BIOS PLUS Version 1.10 A05. Anyone know where to get the updates and how to do them? My computer is Dell Dimension 2400. Thanks.

Oh and I don't have a floppy drive. So I'm not sure how to update the BIOS without one.
 

A:Updating BIOS?

Read other 9 answers
RELEVANCY SCORE 44.8

I'm trying to update the BIOS on my ASUS mobo. I've got Afudos and the newest updates, but I don't know how to put them together.

I was trying to use the DOS version and it told me

Usage: afudos /i<ROM filename> [/o<save ROM filename>]

The ROM is called P4P8SE06.ROM

I typed "afudos /i<d:\downloads\ASUS\Updated BIOS\P4P8SE06.ROM> [/o<save d:\downloads\ASUS\Updated BIOS\P4P8SE06.ROM>]" but it didn't work.
 

A:Updating BIOS

http://support.asus.com/technicaldocuments/technicaldocuments_content.aspx?no=546&SLanguage=en-us

http://support.asus.com/technicaldocuments/technicaldocuments_content.aspx?no=541&SLanguage=en-us
 

Read other 2 answers
RELEVANCY SCORE 44.8

Hi i have just bought a new laptop as i fried the MoBo in my last one which i bought in the early days of Vista, not realising what system requirements were for Vista i landed up with a very under resourced in the hardware dept. laptop and i am shure my constant tinkering with the hardware caused the death of it. Which brings me to my query (now that i am overly paranoid about tinkering with hardware) i have been researching and have found there is very mixed opinion on applying Bios updates and was wondering what people here thoughts are? I have two pending Bios updates 1st addresses better support for SP2 and the 2nd improves system performance & LCD panel brightness.
and if i apply these updates do i need to do both updates or just apply the current one, any opinions would be greatfully received.

A:Updating the BIOS

Bios updates are mutually exclusive (ie, you can only have one installed). I believe that most bios updates are cumulative so if you choose the newest one you should get both of these issues addressed.

Read other 2 answers
RELEVANCY SCORE 44.8

I have:
American Megatrends
BIOS date: 04/25/01
BIOS ID: 62-0425-001437-00101111-071595-SiS730S-M810LR
Chip Set: SiS 730 rev 2
OS: Microsoft Windows XP Version: 5.1.2600
CPU: AMD 1.2 GH

What do I need to update my BIOS

Thanks in Adv...
 

A:Updating BIOS

Read other 15 answers
RELEVANCY SCORE 44.8

So the motherboard should be compatible with some of the ryzens.But will the bios support it ??

A:Updating the bios ??

@letsthrowq, welcome back to the forum. There are letters associated with the model, such as, nc, nf, nt or no.  Once I have this information, I will able to answer your question better.

Read other 1 answers
RELEVANCY SCORE 44.8

Hello

Probably a very naive question but I'm wondering how I can update my BIOS (if an update appears) when my PC doesn't have a floppy (A drive? Most of the accounts I've read on the website for the motherboard (ASUSTek) are confusing and involve copying a file onto a floppy for reboot.

Is there another (simpler) way?

Thanks
 

A:Updating Bios

Most new machines have updaters that run in Windows. If the file needs to installed from DOS, like a floppy, it can be installed from a bootable CD that boots into DOS, like the Win98 Boot CD Image that has had the BIOS files injected into its image.
 

Read other 2 answers
RELEVANCY SCORE 44.8

i just got a new ram for my pc. and the ram speed 2400MHz but my pc default 1333 MHz so i tried to chang the clock timing and the voltage of the ram but my BIOS is so old it didnt alow me to do that. is there any other way i can get to change my ram speed that i paid for.

A:updating Bios

kerlos28 You can NOT clock the RAM at speeds your processor will not support, and without specific model information of your PC, I can not see what speeds it will allow. So please follow these instructions:  Finding Your HP Product Model Number | HP® Customer Support We can proceed once you provide the information.Thanks

Read other 1 answers
RELEVANCY SCORE 44.8

Hi. Will the bios in my PC ever need to be updated? How will I know the signs of it. My PC is about 7 years old now.
Reason I ask is my friends PC that is a 4-5 year old DELL had a message that the bios was out of date, and I updated it for her by following the prompts.

I don't even know what a bios is....should I worry about my PC?
 

A:Updating Bios

The best rule to follow is,if it is work OK it doesn't need updating.
 

Read other 2 answers
RELEVANCY SCORE 44.8

Recently discovered my BIOS is from 1999, All i know about it is that is is a Dell AO6 Revised, where can I get an update (preferably for free)?
 

A:BIOS updating-ing

I would check Dell's web site. Only update your BIOS if you have a reason to do so! If everything is working OK leave it alone.
 

Read other 1 answers
RELEVANCY SCORE 44.8

Hi all,

My PC seems to keep turning itself on after I power off and apparently a common issue is that you need to update your bios.

My Motherboard is GIGABYTE GA-78LMT-USB3 AMD 760G (Socket AM3+) Micro-ATX Motherboard. Using System Tools I've found out that my BIOS version/date is "Award Software International, Inc. F2, 10/08/2012".

I think I've discovered the correct motherboard on this site

This is how far I've got - unsure what I need, or should download from the options there (and even if I have the right site). Obviously I'm really cautious about all of this so would really appreciate any help or advice?

cheers

Scam

A:Updating my BIOS?

Hi,

Its a good idea to be cautious. Please check on your motherboard to see whether its a Rev. 4.1. If it is, then that is indeed the BIOS to download and install, and that is the correct site.

Regards,
Golden

Read other 4 answers
RELEVANCY SCORE 44.8

Basically I want to flash my Bios, but the thing is... I am not sure which I have to choose! is it all of them? do I choose the latest one? I am lost.

Bios updates: http://www.gigabyte.com/products/product-page.aspx?pid=3863#bios
Motherboard: GA-Z68A-D3-B3 http://www.gigabyte.com/products/product-page.aspx?pid=3863#ov

your help is really appreciated.

(p.s. if I am correct, my current version is F3. Not even listed!)
 

A:Updating BIOS

You only choose one and that is usually the latest one.

That said, are you having a problem that you hope the BIOS update will fix? If not, see the warning:

"Warning:
Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction."
 

Read other 4 answers