Over 1 million tech questions and answers.

TI compliance host controller error message

Q: TI compliance host controller error message

Hi - I have a yellow warning indicator in my Devices and Printers folder next to my PC. The error message is:

Name - Texas Instruments 1394 OHCI Compliant Host Controller
Device Type - IEEE 1394 Bu host controllers
Device Status - This device cannot start (Code 10)

I am not exactly sure what this is affecting but I am unable to print for one, despite uninstalling and reinstalling the print drivers.

Anyone seen this type of issue before?

RELEVANCY SCORE 200
Preferred Solution: TI compliance host controller error message

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: TI compliance host controller error message

What is the make and model of your printer. What type connection does it have? USB, Firewire or wireless?

Read other 1 answers
RELEVANCY SCORE 63.6

Hi All,
I believe my computer had a virus and damaged windows xp home installation, most motherboard devices were showing the error message. I have completed a XP Repair and have got all devices working except for USB Host Controllers and thus the USB Ports.
When i go to 'Device Manager' and click the USB Controllers i get the yellow triangle / exclamation mark.
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)".
I have deleted devices and scanned for hardware changes - no change.
Completed Second Repair - No Change
SP2 & SP3 - No Change.
Can i get ports working again or perhaps are ports unrepairable ?
Really can't format at this point.

Any Ideas guys ?

Thanks in Advance
 

A:USB Host Controller - Error 19

are they enabled in bios?
 

Read other 2 answers
RELEVANCY SCORE 63.2

Hey I got an Asus G74SX-BBK7 laptop with windows 8 64bit pro upgrade installed and I can install All the drivers that are windows 8 and up (to 10)compatible (touchpad, intel chipset, etc)But can't install The fresco USB 3.0 has it says "Fresco USB3 Host controller is not found" even though I have a Fresco host controller and I do see it in real life/ the blue port , sadly I don't know why it's not detecting it and yes it has worked fine before / it would install fine without error

the version I'm trying to install is 3.6.4.0 (latest)

and just to say that I've already tried a restore to my OEM system(windows 7 64bit home premium) and it works there but not when I upgrade

so I'm out of ideas

A:Fresco USB 3.0 error about host controller

Welcome.

Since ASUS did not release Windows 8 drivers for that model, there may be an issue with the USB 3.0 implementation and Windows 8.

All I can suggest is to try installing the drive in compatibility mode for Windows 7.

Also try the older Windows 7 drivers from the ASUS site.

Read other 2 answers
RELEVANCY SCORE 63.2

I've been away at college for about 3 months (since early January) and when I left, my computer functioned just fine. I shut it down properly, took the power cables out and took the power strip with me. When i got back tonight for spring break, my USB Host Controller won't start. I've had this problem before, and I needed some electrical work done on it, and it worked fine after I got that. I really do not want to put out the money to get more work done on it (poor college student...) and so I wanted to know if there are any other things I can do before I send it to the shop to get it fixed, like any ways to make sure its not a software issue, or a loose connection or something?

Anyway, from what I remember of my system's stats, it's got an Intel Celeron D processor at 3.2GHz (i know i know...bad processor...), 1GB of RAM, and i'm not sure of the motherboard model, but I can get it if needed.

Thanks!

EDIT: oops...i posted this in the wrong forum, didn't i? sorry...i'm running XP SP2...

A:USB Host Controller Error Code 10

Hello and Welcome to TSF

I moved this to the appropriate forum...


Answer some questions?
1. Do other USB devices work on the system?
2. Is USB enabled in BIOS setup?
3. Is the BIOS up-to-date?
4. Have updated device drivers been tried?
5. Are any USB hubs being used?
6. Is the PC in question a portable (laptop/notebook)?

Read other 5 answers
RELEVANCY SCORE 62.4

Hi! Thanks in advance.

I've been having this problem for around 2 days now, and it's infuriating: I can't use any of my back USB ports because of it! I'm only going off of the front two ports for a keyboard and mouse as we speak

I'll start by saying how this problem started: basically, I can't determine the cause. I usually leave my computer on for extended periods of time, but turned it off due to excessive heat in the room. When I turned it back on, the problem started. Nothing happened any different before restarting than any other time, no drivers installed, nothing updated, etc.

Now this happens every single time I reboot, even when I somehow end up fixing the problem through a weird combination of rebooting, reinstalling the drivers, and uninstalling the drivers. I'm still not sure what exactly fixes it, as right now I'm still trying to just constantly uninstall, reinstall, and restart in hopes it will work, as that seemed to fix it a handful of times.

Anyway, on to the problem. I get the exclamation point in Device Manager when drivers are installed/when I reboot from everything being okay. here is the properties, and the error code: this device cannot start (code 10). No amount of disabling/enabling the driver fixes it. My hardware ID is PCI\VEN_1912&DEV_0014&SUBSYS_77511462&REV_03
.

When I try to uninstall and reinstall the drivers, it gets the same problem. I've tried several different drivers from different download locations and differ... Read more

A:Renesas USB Host Controller Error: Code 10

Since you feel it's a driver issue try System Restore since it will bring you back to the condition 2 days ago (choose proper date).

Read other 5 answers
RELEVANCY SCORE 62.4

Hello, I'm not sure if these issues are related but here's the issues I'm having and I cannot find a resolution anywhere. I appreciate the guidance that is provided.

What I noticed in the device manager is the RICOH OHCI Compliant IEEE 1394 Host Controller and the SDA Standard Compliant SD Host controller is that they both have an ! exclamation point next to them. I try to update the driver and it will state that the driver is loaded and working correctly, but still shows up with an exclamation point next to it. I cannot figure out a resolution to this.

Also, I'm not sure if those issues are related to this but I am missing my DVD player. It shows in the BIOS but not in the Device manager or in my computer.

Can anybody provide and guidance on what may be the issue?

I am running Vista home premium on an HP dv6815nr.
 

Read other answers
RELEVANCY SCORE 62.4

The device cannot start. Error 10.

I have installed the drivers various times and the controller will not work.

I have an MSI Z77 GD55

It is a brand new build and it will not pick up the USB 3 controller. Everything else is fine.

A:Intel(R) USB 3.0 eXtensible Host Controller (error 10)

Do you have the device code for the controller (see the hardware device info for the device in Device Manager)? It will have a VEN and DEV number.
Intel's vender number is 8086.

Read other 9 answers
RELEVANCY SCORE 62.4

Hi There,

I haven't used my SD card reader on my ASUS F3E, Windows Vista 32 bit for a while, but when I tried to stick a card in this morning it said the card needed to be formatted every time I tried to explore it.

I thought it may have been the card so got another one totally different brand and size. Same problem, so I updated the driver via the internet which said it was up to date. At this stage there was no error marker on the driver in the list.

I then uninstalled the driver and and found this one on the net;
RICOH_R5C833_vista_070514
which I have to assume is the right one as it claimed that it was up to date also. I've tried several times to install/remove and it always loads in ok but there is an error in the list now all the time on;
SDA Standard Compliant SD Host Controller

In properties of the driver it says;
"This device cannot start. (Code 10)"

If anyone has any ideas, that would be great!

A:SDA Standard Compliant SD Host Controller - Error

Code 10 seems to say to install the latest service pack but I already have SP2.

Read other 5 answers
RELEVANCY SCORE 62.4

i have updated windows 8 to windows 10 once i have updated iam getting USB-IF xHCI USB Host Controller error(code 31) and it is creating problem with my internet connection which goes on and off and i have to troubleshoot frequently.

A:USB-IF xHCI USB Host Controller error after upadating from w...

Hello, this is common issue. this issue can be fixed with windows update(brings required drivers) and(if ndeeded) update chipset drivers from vendor webpage such as intel.com. that should fix it forever.

Read other 1 answers
RELEVANCY SCORE 61.6

I'm using a new Dell at work (an Optiplex GX280) with Windows XP, and it has recently been popping up with the following error:
"The device driver for the 'SCSI/RAID Host Controller' device is preventing the machine from entering standby. Please close all applications and try again. If the problem persists, you may need to update this driver."

That's the problem.

I've been to the Dell site, but don't see any drivers for SCSI/Raid anywhere on their site (here is where I was looking).

I also opened the Device Manager, and told the SCSI/RAID host controller to update the driver. It looks and looks and looks, but doesn't find anything.

How can I fix this?

Thanks!
 

A:Solved: error about SCSI/RAID Host Controller

Read other 9 answers
RELEVANCY SCORE 61.6

I have a gigabyte GA-Z77X-UD3H which uses the via chipset for USB (VIA VL800 chip)

I have an error in system device for Usb xHCI Compliant host controller

I am just wondering what drivers I can use for this?

Also I didn't load any other drivers for my mobo - is this okay (I don't see any available for my motherboard)

Do I need to load any "non Microsoft" drivers i.e. intel

Thanks

A:Usb xHCI Compliant host controller Driver Error

You could try these for USB: Via USB 3.0 Drivers Version 4.90a

Download, install using compatibility mode and reboot. Good Luck!

And these are your motherboard's chipset drivers (select Windows 10): GIGABYTE - Motherboard - Socket 1155 - GA-Z77X-UD3H (rev. 1.0)

Just download, unpack, install and reboot. Best of luck!

Read other 7 answers
RELEVANCY SCORE 60.4

I'm trying to get my Linksys AE2500 USB wireless adapter to work with Windows 7 Ultimate 64 bit and an Intel DP55WB motherboard. I've narrowed down the problem but can't find a solution. When I install the USB adapter windows installs it but then generates a unable to start error in device manager. If I disable the second USB Enhanced host controller in device manager the adapter will work and I can go online. However if I restart or shutdown my computer the problem starts all over again. I've installed all the windows updates and have the latest driver from Linksys. I've attached two pics of before and after screenshots of the device manager.

PLEASE HELP!!!!!

A:USB Enhanced Host Controller causing Device Unable to start error 10

Hello Billysunday. Welcome to the forum.

This looks like a fresh W7 install and possibly a new build. (confirm please)

Your System Specs say this is a Haswell system. Yet the USB Controllers are Series 5?
Have you installed the most current chipset driver for the Maximus?
Have you installed all the motherboard drivers?

Read other 5 answers
RELEVANCY SCORE 58.8

svc host error message keeps popping up. Can't close or debug, only move it. Possibly related to McAfee - tried to remove it and can't seem to get rid of all components.
 

A:svc host error message

Read other 8 answers
RELEVANCY SCORE 58.4

I keep getting the message "Host Process fo Windows has stopped working". Below are the details
Problem signature:
Problem Event Name: APPCRASH
Application Name: svchost.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47918b89
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a7a6
Exception Code: c000071b
Exception Offset: 00088ed9
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0e02
Additional Information 2: b21b56b606e7544720668ce364087082
Additional Information 3: 0e02
Additional Information 4: b21b56b606e7544720668ce364087082

A:Error Message/ Host Process HELP!!!

Hello kvazquez and welcome to the forums

Can you do the following for me please:

SFC Scan

1. Open the start menu
2. In the search box, type cmd
3. Right click on cmd and select Run as administrator
4. In command prompt, type:

sfc /scannow

5. Let it run and let me know if it finds any Integrity Violations

Tom

Read other 3 answers
RELEVANCY SCORE 58.4

Hello,

So i opened Hijack this today and this message popped up.

It would let me open it as normal after i pressed OK, checking the host file nothing appears abnormal:

# Copyright (c) 1993-2006 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

# localhost name resolution is handle within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
I've tried using hostXpert and a microsoft fix but i'm still getting this message, what can i do to stop it?

I use Malawarebytes Anti-Malware, had a virus a few weeks ago but it got rid of it.

A:HijackThis error message (host)

As it says at the bottom of the error-box:

For Vista: simply exit HijackThis, right-click on the HijackThis icon and choose "Run as administrator"

Applies equally to Windows 7.

Read other 7 answers
RELEVANCY SCORE 58.4

generic host process for win 32 services has encountered a problem and needs to close. Then a message says you have been diconnecte would you like to reconnect? i click yes and a message says your modem is busy or having a problem. i have to reboot to reconnect.
 

A:error message generic host

This might cover your problem:

http://support.microsoft.com/default.aspx?scid=kb;en-us;821690

I've also been able to get online even with that service blocked by me using Sygate Firewall, so if you have a 'proper' firewall (not the inadequate Windows one), try permanently blocking it. If you don't allow Windows to use it it shouldn't cause the error, and, like I say, I can get online with it blocked.
 

Read other 1 answers
RELEVANCY SCORE 57.6

I have a Vista Business installed on my machine.
For few days hadn't switched off and put it to sleep mode. During that period had
installed 2 softwares only 1) flv to mp3 converter and 2 ) Java 6 JRE update 7 .

I had switched off once now , and when I have started it again after bootup immediately after sometime receive message 'Host services have stopped working' Windows will notify if a solution is found.
Have tried to use safe mode and restore , but even restore service is not working.
Please suggest and any help will be a boon right now. The laptop is a Sony so no CDs with it.

Thanks
Saurabh

Read other answers
RELEVANCY SCORE 57.6

Good Morning,

I receive the following error message on every boot up of my Toshiba Laptop, running Windows 7, 64 bit OS.

F - Secure Host Process is trying to recover your information.

The message disappears after a few seconds and does not recur until the next boot up.

I assume that F refers to a USB device, but I never boot up with a USB device installed and I have always used the 'safe removal' process.

The error message seems to be of little significance but its persistent occurrence is very frustrating.

Any suggestion to solve this annoyance would be gratefully received.

jcbhydro

A:Secure Host Process Error Message

Just for grins after shutting down try holding down the power button so that the machine shuts down completely. Wait about 30 seconds. Then boot up. It may not work. But it shouldn't hurt to try.

Read other 4 answers
RELEVANCY SCORE 57.6

Windows XP Professional Service Pack 2
2.67 gigahertz Intel Pentium 4
1984 Megabytes Installed Memory
Board: Intel Corporation D101GGC AAD35788-305
Serial Number: BTGC6090302D
Bus Clock: 133 megahertz
BIOS: Award BIOS for Intel

I frequently come across "generic host processs error message". Can some one guide me how to avoid this.

pscraja

A:generic host processs error message

According to microsoft, this error occurs in windows XP sp2, if security update 873333 (MS05-012) had been installed.
Upgrading to XP Service Pack 3 (SP3) could easily fix this problem.

Read other 2 answers
RELEVANCY SCORE 57.6

Downloaded and saved to my desktop the msicuu2 file (Windows Installer Cleanup Utility) from support.microsoft.com. When I attempt to run the exe file the Windows Script Host pops up with the error....

Line: 2
Char: 1
Error: The specified module could not be found
Code: 8007007e
Source (null)

Would appreciate a solution so that I can go on to the next problem ...printers!

thanks for your help!

A:Windows Script Host (error Message)

See this link for a possible solution.

Read other 1 answers
RELEVANCY SCORE 57.6

Hi,

I'm having the problem with Generic Host Process. When this message comes my system is not able to access the network resources.

What I observed in the system is whenever this error comes one file gets drop in the system32 folder. I'm having an Antivirus along with Agnitum Firewall. An AV is detecting the file and deleting it. But what I observed next is it opens a Port 445.

Please help me out to resolve the issue as soon as possible.

Read other answers
RELEVANCY SCORE 56.8

Over the past week or so my computer has become incredibly slow. I've run several BitDefender scans and registry cleaners since i had originally thought it had something to do with a virus, but no luck!

I also keep getting an error message which says something along the lines of; 'host process for windows services stopped working and was closed'. This has been appearing continuously for the past few days, literally every two minutes.

I dont know much about this sort of thing so all and any kind of help is welcome!

I took a look around and realised posting a hijackthis log may help.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 21:37:58, on 30/10/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18294)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Program Files\BitDefender\BitDefender 2010\bdagent.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\Program Files\BitDefender\BitDefender 2010\seccenter.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\WiFiMsg.exe
C:\WINDOWS\System32\rundll32.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\WINDOWS\ehome\ehtray.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Windows\ehome\ehmsas.exe
C:\Windows\system32\wbem\unsecapp.exe
C:\Prog... Read more

A:Computer slow and host process error message

Now there seems to be a more frequent error message which says 'cryptographic services has stopped working'.
Also, all my windows keep crashing and my windows vista updates are all failing.

Any ideas?
 

Read other 1 answers
RELEVANCY SCORE 56.8

I keep getting an error message, when i play in fullscreen. the message closes the fullscreen mode and that is very irritating. Thanks for solutions!

Read other answers
RELEVANCY SCORE 56.8

Over the past week or so my computer has become incredibly slow. I've run several BitDefender scans and registry cleaners since i had originally thought it had something to do with a virus, but no luck!

I also keep getting an error message which says something along the lines of; 'host process for windows services stopped working and was closed'. This has been appearing continuously for the past few days, literally every two minutes.

I dont know much about this sort of thing so all and any kind of help is welcome!

I took a look around and realised posting a hijackthis log may help.

Code:
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 21:37:58, on 30/10/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18294)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Program Files\BitDefender\BitDefender 2010\bdagent.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\Program Files\BitDefender\BitDefender 2010\seccenter.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Hewlett-Packard\HP Quick Launch Buttons\QLBCTRL.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\HPWAMain.exe
C:\Program Files\Hewlett-Packard\HP Wireless Assistant\WiFiMsg.exe
C:\WINDOWS\System32\rundll32.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\WINDOWS\ehome\ehtray.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Windows\ehome\ehmsas.exe
C:\Windows\system32\wbe... Read more

A:Slow computer and host process error message

Please do not post HJT logs in Vista/ Windows 7 support.

I see both Sony & HP software in there. Which system do you have? WHich media center?

Read other 12 answers
RELEVANCY SCORE 56.8

Sorry, reposted in the correct forum.
 

A:Computer is slow and host process error message.

Please click here to download and install the HijackThis installer. ​
Run it and select Do a system scan and save a logfile.

The log will be saved in Notepad. Copy and paste the log in your next post.

Do not fix anything​
 

Read other 1 answers
RELEVANCY SCORE 56.8

problem signature:
Problem Event Name: APPCRASH
Application Name: svchost.exe
Application Version: 6.1.7600.16385
Application Timestamp: 4a5bc3c1
Fault Module Name: StackHash_b4ee
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c00000fd
Exception Offset: 0000000000000000
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: b4ee
Additional Information 2: b4ee5de6a2322745523997a782b35692
Additional Information 3: 277e
Additional Information 4: 277e19c30fbd5f6bb531ec9e027c37c3

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:How do i fix the message error Host Process for Windows Services

its could be one of a few things.

When vista came out a lot of people had the issue due to software that wasnt fully compatible/up to date.

Others have had the issue with ATI Control catalyst if you have an ATI card, update the software and drivers.

last but not least it could be dodgy ram, so do some memory tests.

Read other 1 answers
RELEVANCY SCORE 56.8

I have been getting an error message generic host process for win32 has encountered a problem and needs to close. After it closes I often have to reboot to do anything. I have ran ccleaner and it's regestry tool. I have ran malwarebytes , McAfee, super anti spyware, and ad-aware. Malwarebytes found 4 problems , but I still get the same thing. It doesn't seem like its as bad , but it still happens several times a day. It's on my computer I use for work, I really need to get it fixed.

Thanks, Bengy

A:generic host process for win32 error message

Hello,What is your Operating system amd please post that MBAM scan log.

Read other 4 answers
RELEVANCY SCORE 56.4

Windows update was interrupted yesterday and now I'm getting all kinds of errors.

1-SVChost.exe application error Instruction at 0x745f2780 referenced memory a 0x00000000 memory could not be "read". This happens when I try to re update windows and when I boot computer and perodically while searching the internet.

2-No audio device. My sound is only working when the error message pops up.

3-Generic host process for Win32 services has encountered probelm needs to close.
(this occurs when I boot up computer)

4-unable to create C:/document and settings/jamie/application data/BVRP Software Netwaiting Moth log txt.file (this happened when I booted computer

I called dell as the system is only 4 months old, and i have warranty, however they informed me that for software related issues they would charge 264.00!!!

You could say that I'm rethinking my purchase choice.

Any help would be greatly appreciated!

Thanks so much
 

A:SVC host.exe error message-windows update, configuration problem

did a system restore to a checkpoint on monday, when all was well. Fixed the sound problem, but still getting the error message about SVChost and the Win 32 one.
 

Read other 2 answers
RELEVANCY SCORE 56.4

everytime I reboot my computer, it always showed up. and i think it effects my connection to the internet and sound. I have to reboot several times to get the internet wireless working again, but at the same times my computer sound didn't work. and sometimes I can't opened my Itunes..
sometimes I get Microsoft framework error message too... .
Could someone help me???
 

A:generic host process for win32 services error message

Read other 9 answers
RELEVANCY SCORE 56.4

It seems that this started when I upgraded from IE6 to IE8.

I start my computer and things are running fine and all of a sudden I get an error message - Generic Host Process for Win32 Processes enobleepered a problem.

After this I can usually keep operating somewhat but IE is non-functional.

Typically after this happens I also can't run Task Manager or shutdown without holding down the power button.

I'm running XP SP3.

I've run Malwarebytes several times and it doesn't make any difference.
Thanks for any assistance you can provie.

A:Generic Host Process for Win2 Processes error message

Things have gotten worse - now I can't even run anything on the computer. It immediately gets Windows Security Alert and anything that I try to run gives the security warning.

I booted in safe mode and ran Malwarebytes - full scan - and it didn't find anything.

Read other 1 answers
RELEVANCY SCORE 56.4

Hello. I am currently doing some minor tweaks to a friend's laptop that has Vista Home Premium loaded. The changes I made yesterday were as follows (and in this order): Uninstalled McAffee Security and installed MSE, uninstalled Abobe Reader and installed Foxit Reader, installed Firefox and downloaded a Windows update for Vista SP2. I'm almost positive that the error message appeared after the Windows update but can't be certain as I don't know how quickly the error message appears after the error has occured. The error message doesn't hinder performance but is annoying when it pops up. Can you please offer some advice/help on how to get rid of the error message. Thanks.
 

A:'Host Process For Windows Services stopped' error message

This MS web page seems be describing what happened to you.

http://support.microsoft.com/kb/940520
 

Read other 2 answers
RELEVANCY SCORE 56.4

Good day everyone. I am a newbie here in Tech Support Forum. I'm not really good with technical stuff that's why I decided to ask for help. Here's the problem.



I am using Microsoft Windows XP Professional Version 2002 Service Pack 3.

I badly need your help. Thank you so much.

A:Generic Host Process for Win32 Services Error Message

Hi MaVeRn,

When does the error message appear? One thing I recommend is scanning your computer for viruses/spyware in safe mode. Hope everything works out for you.

Read other 3 answers
RELEVANCY SCORE 56.4

Hello,

This is my first post on this Forum. I am working on my cousins computer that had several problems:

1.) she filled her hard drive nearly full (less than a gig free space)
2.) computer had many virus and malware.

I have moved data and documents onto newly installed drive to free up primary drive for repair.

XP Home still would not function properly after running Malwarebytes and Spybot Search and Destroy 1.6.2 both applications were fully updated and (imunizations applied)

Computer was not responding and many errors were present.

I then performed a "repair" installation of XP home to establish functionality

I now am getting error message about generic host process for Win32 services...I welcome some help to remedy and see if this message is any possible malware still present or a windows error..

I also suspect there are some networking issues...had much trouble establishing conectivity though a newly installed copy of IE 8

I welcome your thoughts

A:Error message: Generic Host for Win32 pops up randomly

Hello and Welcome to TSF.

If you haven't already, please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

We want all our members to perform the steps outlined here:

NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

After running through all the steps, you shall have a proper set of logs. Please post/attach the logs in your next reply.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

------------------------------------------------------

Read other 19 answers
RELEVANCY SCORE 55.6

OK so there are 1001 posts on this on every newsgroup...so here's one more.
Basically, I'd just like to know...has anyone actually tried the microsoft
fix:
http://www.microsoft.com/downloads/...B9-7A6A-49B6-BD89-AFAD4E049C48&displaylang=en

and found that it works? Also, is there an uninstall facility for this fix
in add/remove programs?

My situation:

Brand new Compaq Presario M2045AP, winXP SP2 loaded, have automatic updates
enabled & installed all.

Had Norton AV installed but uninstalled that & replaced with Vet Antivirus.
Have updated Vet, and also have updated adaware and spybot all running & no
viruses present (that they know of anyway)

Have HP PSC 1315 all-in-one with all software updated including critical
update for HP imaging software. In fact this was pre-loaded.

My message is as follows:

Error Signature.
szAppName:svchost exe
szAppver 0.0.0.0
szMod.Name : unknown
szMod.Ver.0.0.0.0
offset.00000000

When following instruction to "click here" the following files will be
included in the error report:

c\DOCUME-1\xxx
1\LOCALS-1TEMP
1\WER 9 bc8.
dir 00\svchost exe mdmp
dir 00 \appcompat.txt

(where xxx is my name)

I have no problems as some people do with the computer restarting or not
shutting down - once this message is closed all behaves well. The message
does not come on every start up but when it does it refers to an error in the
process from say the day before - it's not an instant repo... Read more

A:Solved: Generic host process for Win32 services error message

It's actually a Hewlett-Packard error. This is fairly common with HP products installed on computers running XP SP2.

Go HERE for how to fix it.
 

Read other 3 answers
RELEVANCY SCORE 55.6

Hello, I can't access Windows update. I get this error message: "Internet Explorer cannot display the webpage". Is malware blocking access? I ran Malwarebytes' Anti-Malware, but it found nothing. Please help so I can access Windows update again.

I also get this pop up error message periodically: "Generic Host Process for Win32 Services". My internet connection then cuts off & I can only reconnect by restarting the computer. I don't know what to do & it's very frustrating. Any assistance would be greatly appreciated please. Thanks very much.
DDS (Ver_10-10-10.03) - NTFSx86
Run by Vincent at 13:27:08.70 on Mon 10/18/2010
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2047.1002 [GMT -7:00]
============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\WINDOWS\system32\svchost.exe -k WudfServiceGroup
svchost.exe
svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
svchost.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Norton AntiVirus\Engine\16.8.0.41&... Read more

A:Can't run Windows Update & also "Generic Host Process for Win32" error message

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. You can subscribe by clicking the Options box to the right of your topic title and selecting Track This Topic.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 3 answers
RELEVANCY SCORE 55.6

Hi,
I'm getting this error since a few days. "Generic Host Process for Win32 Services" and from then I'm not able to get audio output after getting this error message. Every time I start my system I'll get this error after some time and thereafter audio will be disabled but only Windows sounds will be available. I thought this to be a Audio Driver error and reinstalled the Audio driver several times but it's of no use. I'm using Zone Alarm firewall on a Win XP SP2 system.
Please help me out !!!


 

A:Generic Host Process - Error message [moved from XP; Security help needed]

Read other 16 answers
RELEVANCY SCORE 55.2

Hi guys,First off, there's actually someone else on the site who you're helping that seems to have the same problem as me: http://www.bleepingcomputer.com/forums/topic369733.html However, I'll also describe it here if that's more helpful. I've been having an issue with my desktop computer for about 4 months now, and I figure it's really time to get it figured out. My operating system is Windows XP Home Edition, Version 5.1 (Build 2600.xpsp_sp3_gdr.100427-1636 : Service Pack 3) When I first turn it on, all seems to be going well. After a while (it sometimes takes a couple of minutes, sometimes a few hours--I haven't noticed a pattern yet) a Windows error pops up:When I click to see what the error report contains, I get this code: szAppName : svchost.exe szAppVer : 5.1.2600.5512 szModName : ntdll.dll szModVer : 5.1.2600.5755 offset : 00023845Once this error has popped up, my computer's sound card seems to go out. There is no sound whatsoever on the internet (Youtube, etc.) and if I try to open my iTunes, I get this error:(It's strange, but I've found that if I open my iTunes BEFORE the error occurs, music will continue to play, even after the error happens. Unlike that, if I open Firefox and have a Youtube clip playing, it will mute the clip right in the middle of it)Several other issues seem to come up after this point. At some point after the error occurs (again, hours or minutes, no real pattern detected here) my taskbar sw... Read more

A:Generic Host Error message, redirect virus and sound card problems?

Hi Jen.Let's try this.Please download the TDSS Rootkit Removing Tool (TDSSKiller.exe) and save it to your Desktop. <-Important!!!Be sure to download TDSSKiller.exe from Kaspersky's website and not TDSSKiller.zip which appears to be an older version 2.3.2.2 of the tool.Double-click on TDSSKiller.exe to run the tool for known TDSS variants.
Vista/Windows 7 users right-click and select Run As Administrator.If TDSSKiller does not run, try renaming it.To do this, right-click on TDSSKiller.exe, select Rename and give it a random name with the .com file extension (i.e. 123abc.com). If you do not see the file extension, please refer to How to change the file extension.Click the Start Scan button.Do not use the computer during the scanIf the scan completes with nothing found, click Close to exit.If malicious objects are found, they will show in the Scan results - Select action for found objects and offer three options.Ensure Cure (default) is selected, then click Continue > Reboot now to finish the cleaning process.A log file named TDSSKiller_version_date_time_log.txt (i.e. TDSSKiller.2.4.0.0_27.07.2010_09.o7.26_log.txt) will be created and saved to the root directory (usually Local Disk C:).Copy and paste the contents of that file in your next reply.~BladeIn your next reply, please include the following:TDSSKiller Log

Read other 5 answers
RELEVANCY SCORE 55.2

Computer is a Sony-Vaio laptop running on Vista Home Premium SP1.
When I shut down my computer today, a process had to be terminated, only then the computer could be shut down. On rebooting the computer, I checked the Problem Reports and Solutions section and discovered the following error:
---
Product
Host Process for Windows Services

Problem
Stopped working

Date
30.12.2008 19:22

Status
Report Sent

Problem signature
Problem Event Name: APPCRASH
Application Name: svchost.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47918b89
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a7a6
Exception Code: c0000005
Exception Offset: 00043387
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 2055
Additional Information 1: eac3
Additional Information 2: f502d4f108eebf61a496cc921ce90852
Additional Information 3: 0475
Additional Information 4: b889c0a95fa69954013195945f077105

Extra information about the problem
Bucket ID: 635711655
---
I don't think this has ever happened before (I've had the laptop for about 8 months), but I did install HP printer software a few days ago. I downloaded the latest vista driver for the printer from Hewlett Packard's website, everything installed fine, and the software updated itself automatically to the latest version, so I don't know if it's printer-related.
 

A:Solved: Error message: Host Process for Windows Services stopped working

Read other 8 answers
RELEVANCY SCORE 54.8

I had a virus for all of 3 minutes, it was that shield crap.

I recently received this error message: Generic host process for win32 services has encountered a problem and needs to close. It came up twice today so far and when I closed out the box I lost the stuff on my desktop, my icons and the start toolbar. I have also had 2 dll errors pop up since then too everytime I turn my computer back on.

The dll errors are as follows: c:\windows\kbjmer.dll
c:\windows\dilimarlgafeyuz.dll

If anyone can please help me I would really appreciate it. It seems like my computer is always 'catching' something.
 

A:Had virus, IE wont open,error message Generic host process for win32 pops up

Bump
 

Read other 2 answers
RELEVANCY SCORE 54.8

Have got a SATA 250 gb drive. All of a sudden the above error meessage appears. Cant get access to the drive (where My Docs r) ans XP wont boot up if drive is connected. Had to disconnect drive so PC will boot up. IS ALL MY DATA LOST in this drive, or can I retrieve some of it. It was partitioned into 3 drives. Any advice or help would be appreciated.. Newcomer to this site.
 

A:ERROR MESSAGE - disc failed :, controller 0, channel 0, master >

Doesn't look good.

Any entries in the event viewer in windows?
 

Read other 2 answers
RELEVANCY SCORE 54

I attempted to install this through Windows update and got an error message above. Can anyone help me with this? Running Windows Vista Home Premium. The computer tells me that it's installing the driver software and tells me that there is a problem installing it. When I try to install through windows update I get the message listed in the title.

Please help.

nancy
 

A:received error message 80070436 while installing upate for ATA 4379 ATI controller

Seems like a few other people had similar issues. Did you try installing an updated driver from the manufacturers site? Windows Update sometimes glitches like this.
 

Read other 1 answers
RELEVANCY SCORE 54

I'm trying to repair install Windows 7 but every time I'm getting the error "An error prevented a required compliance check from completing". I'm dual booting it with Ubuntu 14.04-lts and sfc /readonly gave the following output (greped the line with [SR] in it). There are many badblocks (like 70 or more) in my 500GB hard disk, but I checked for it (using chkdsk) few weeks ago. Please help.

A:An error prevented a required compliance check from completing

The hard drive is prime suspect. Run the maker's HD Diagnostic CD scan followed by another full Disk Check. If either fail again then I'd replace the HD because you can never trust one after it has failed both tests. I would even replace it if it failed Disk Check with that many errors. You didn't say if they were all repaired. If not then it should have already been replaced.

Read other 9 answers
RELEVANCY SCORE 53.6

Model Hp-P6-2310eaI have upgraded to W10. I now cannot use The DVD player I know that the MS Media player is selected on the auto player.The only fault I can see is :-Unknown USB Device (link in Compliance Mode) Driver error.Is this the problem and how can I resove it. I have update drivers uninstalled the drivers an reinstalled 

Read other answers
RELEVANCY SCORE 51.2

In the past week or so my computer has been experiencing the same problem of win32 error message, which on prompt will reset my toolbar and everything back to previous windows 98 style of the white toolbar and old style of design, i know this has something to do with a virus.

I recently just had the fake Anti-Virus scan maleware on my computer which i succesfully removed with maleware-bytes and Whitesmoke translator which i also removed twice with malewarebytes. Im just wondering if there anything that can cause this sort of problem with my computer, maybe a virus im not catching? Also it seems my computer has been booting up rather slowly and it just seems super sluggish.

Any help would be appriciated just lemme know what you need thanks!
 

Read other answers
RELEVANCY SCORE 51.2

Ok, so since of recently, my computer has been acting really wierd. I would start the computer up normally and everything would be fine. But after spending some time on the internet, mostly around 30-45 min, I would get the same "Generic Host Process For Win32 Services" error message. And then after I close the box, my screen starts to act really wierd. A blank white bar appears between the top blue bar (on my computer) which would usually have the website , etc.. "Tech Support Guy Forums - Mozilla Firefox" and the menu bar. And then the windows box changes from "Windows XP style" to "Windows Classic style" on its own. I am still able to use the computer/internet but after a while, it starts to progressively get slower and slower. I have no idea whats wrong with it. I have Avira AntiVir and Malwarebytes' Anti-Malware and I have scanned my computer many times but nothing comes up. Please help
I have Windows XP
If you need to know anything else, i'll try my best help but i'm not the best when it comes to computers.
I'm also gonna try to attach screenshots of my computer/error messages.

Thank you
 

A:"Generic Host Process For Win32 Services" error message

Read other 11 answers
RELEVANCY SCORE 51.2

When I plugged in my wifi adapter in the usb slot I got the message saying I had a high speed device in a non high speed usb port. This left me a little puzzled since this is a fairly new mobo [Dfi LanParty nf4]. It recommended me getting a High Speed USB 2.0 host controller, so I checked my mobos disk and it had nothing under USB so I'm out of luck. The adapter says its running at 54mbps, so is there no problem?

Thanks,
AJ
 

A:Usb 2.0 host controller?

Is your windows XP SP2, if it isn't you need to update it to SP2. If it is SP2 go to My Computer, then view system information, then hardware, then device manager, then click the + next to Universal serial bus controllers, then uninstall all USB controllers, then restart. Once you start up in windows XP and plug in your Wifi card it will search for USB controllers, if any boxes come up just press next and let windows scan and install the drivers( USB drivers come with SP2, you dont need a CD). This should solve the problem.
 

Read other 4 answers