Over 1 million tech questions and answers.

Blank Screen upon Windows Startup

Q: Blank Screen upon Windows Startup

I am newbie here and am amazed by the amount of information and response on this forum. I hope someone can help me with my problem.

I have one of those SONY Vaio All in One PC's - VGC-LS25E running Windows Vista Home Premium, 2GB Memory, 250GB HD

Started having problems with computer booting up and it would start dumping memory - so got into safe mode and tried restoring the settings from the last known system restore point, but had no luck.

Next, using my Recovery DVD, I tried going back to the Original Factory installation but it would not not go through my Vista installation.

I got myself new memory and a HD, and wiped my old HD clean. When my memory and HD showed up in the mail a couple days later, I first replaced the memory and tried to start up the computer with my Recovery DVD in place, but the screen is completely blank. There is some activity in the DVD drive, but otherwise there is no noise at all.

I also replaced the HD and still the same.

Any suggestions will be much much appreciated. Thanks in advance.

Preferred Solution: Blank Screen upon Windows Startup

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Blank Screen upon Windows Startup

I don't want to be the harbinger of bad news, but maybe your dvd drive is broken too? Have you used it before your pc has started acting up?

Read other 7 answers

After the Starting Windows screen a blank black screen with a cursor that I can move pops up that lasts a minute (shouldn't happen with SSD, used to be ~10 second boot). Afterwards the login screen will appear as normal and everything works as normal. This doesn't happen when I boot into safe mode.

I attached a list of start up services, installs, and scheduled tasks, along with my latest boot log.

Any suggestions?

A:Windows 7: Blank screen on boot up, before login screen; slow startup

Hello and welcome, try this to see if you have something that's going you don't know about. Use the free version.

SUPERAntiSpyware | Remove Malware | Remove Spyware - AntiMalware, AntiSpyware, AntiAdware!

Read other 1 answers

I am getting a blank screen after starting, even before displaying Windows 7 logo.

Before it Windows 7 stopped working, the error message I got is C:\ drive not accessible error.
Both system repair and restore options say D drive but Windows 7 is on C drive. If I go to command prompt, I see c drive but there is no windows folder.

How do I recover from this error?

Thanks in advance.

A:Windows 7 - blank screen at startup

See if System Restore can help.

Boot into Recovery using your Windows DVD or the HDD recovery partition and select "Windows System Restore" - choose a restore point prior to the problem

Regards. . .



Read other 1 answers

Ahh my first post...
Please help me out with my winXP bootup problem

My computer worked fine until i got a new monitor,
I start my computer, POST goes on fine, Windows XP Professional Logo appears, but just as I would expect to see a mouse pointer and a desktop, i get a black screen (monitor is not receiving signal from video card) and the computer hangs (busy light does not flash as it would normally when windows loads up processes...).
I turn off power, switch back to old monitor, but problem persists.
I remove all devices unnecessary for basic operations, didnt help either.
Safe mode is still operable (the monitor does not shut off there), so I use it to backup all my files.
I insert windows XP installation disk and format my drive, remove all partitions, and install a fresh copy of windows in the only partition left.
Installation works out fine until when the computer restarts, displays the windows logo, and then bang! the same old black screen and lifeless computer.
I went to microsoft support and found article 314503:
"Computer stops responding with a black screen when you start windows XP"
When you try to start Microsoft Windows XP, the computer may appear to stop responding (hang) with an empty, black screen immediately after the power-on self test (POST) is complete and before the Windows XP logo typically appears on the screen.
Which is not really my case because i STILL see the windows logo BEFORE the black screen, but anyways i follow the gu... Read more

Read other answers

I have just installed WindowsXP from a Gateway CD which I borrowed from my friend. I have a new WesternDigital 80 Gig IDE Harddrive WD800 NR. I formated it & tried to install WindowsXP on it. After the CD checked all my hardware & installed the WindowsXP installation software, the computer went to start up. Then I get a screen that says Starting WindowsXP, after about 3 seconds the screen goes blank. I can still here the Hardrive Spinning, but when I look at the bottom of my screen the little light is Orange??! (the little light I'm talking about is the one that turns green when the screen is on & turns orange when the screen is on but the computer is off) What do I do?? Could it be that the CD's Installation program can tell that the computer that I am trying to Install this on, is not from Gateway? I am really stuck, what should I do?

A:Windows XP just installed, screen goes blank during startup!!!???!!

Read other 16 answers


Im having a problem with my newly installed ATI Visiontek X1550 video card. After I installed my card. When I started up my pc the Windows XP startup screen came up but, then my display went blank. The only way that I can use my computer or browse the net is if I turn on my pc press F8 and then choose VGA mode. I even decided to go directly to ATI's site to download the most up to date driver. But my display still comes up blank. I also bought a 450 watt power supply, thinking the old one wasnt poweful enough. My PC is a Dell Dimension 8300 2.66 GHz with 512 MB of memory. I bought the video card at Best Buy and returned it for the exact same card just in case the first card was defective. Any help would be greatly appreciated.
Thank you, Matt

Read other answers

Desktop cannot startup windows 7 home premium 32 bit.
Can only boot from CDdrive and did startup repair / chkdsk / Sfc scan
Hard Drive seems ok.
On reboot, windows logo appears and after 4-5 minutes I get blank screen with cursor arrow even when trying to reboot from safe mode or normal mode.
Have Avast free anti-virus loaded. Could this be the problem?
Pl help. I do not want to lose my files with a clean re-install of Windows 7

A:Windows 7 cannot startup and goes to blank screen with cursor

blank screens problems are hard to handle Ive had this issue before & it repaired itself a few days later luckily i had more than one desktop. However the main concern is Data loss I would advise that you either move the hard drive to another PC internally or externally if you can. If not reinstall windows without formatting windows will move all of your files to a folder called windows old

Read other 2 answers

Hi all, I have a problem that I hope you guys can answer.

When I start up my computer, it goes through its normal startup process, it shows the Windows XP Pro logo and the welcome screen and it even loads my Windows XP desktop. Then, about 5-10 seconds after Windows XP loads, I get a black screen, (However Windows is still running), and then in another 10 seconds my computer reboots and starts the process over again.

Strangely enough, I can reboot in Safe Mode (Which I'm using now), and I can reboot in VGA Enabled mode, both of which work perfectly fine. Also, suspecting maybe my video resolution or something got messed up to something my monitor or video card couldn't handle, tried upping the resolution in VGA mode, and of course it worked fine, so that isn't the problem.

I've been searching around the internet, and many people have indicated that bad video card drivers might be the problem, so I've uninstalled my GeForce 6800 GS video drivers and reinstalled them, with no luck, which I'll explain some more. When I uninstalled my drivers, windows loaded up normally, everything okay. Then, I proceeded to reinstall my drivers and reboot, my problem was back to normal, black screen 5-10 seconds after XP starts. This seems to indicate my video drivers/card is the problem, but if reinstalling them doesn't fix the problem, what will?

Also, I have been using my GeForce 6800 GS for over a year now with no problems, so I KNOW it works on my system. I've tried everyt... Read more

A:[SOLVED] Windows XP Pro - Blank Screen After Startup

Hello . . and welcome to the forum . . the solution there was using the "next to newest" drivers . . which version are you using? It it's in the 160 series, try the 140 series to see if the problem persists

Read other 14 answers

Hi everyone! My parents have a windows 7 Asus pc (I believe home premium) and when started it goes to the black screen stating that it was shut down incorrectly and gives you the option of running startup repair or starting windows normally. When starting windows normally is chosen it appears to begin starting as normal and then goes to a blank blue screen (of death?) with a black border on the left and bottom sides. I'm not much more computer savvy than they are and have no idea what the problem is or where to start. What does this mean?

A:Windows 7 Asus blank blue screen upon startup


Are you experiencing a BSOD? Like this?:

Are you able to boot into Advanced Boot Options?
If so please choose "Last known Good Configuration"

If you are able to boot into windows, reconfigure windows to collect the correct info
You want small memory dumps - "MiniDumps"


And here are the instructions for posting:


Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK



Read other 2 answers

I have a ThinkPad Edge E430, 64bit Windows 7 computer that is under warranty. Upon normal startup, I am able to load Windows 7 and get to the user login screen. After logging in, I get a black screen and can see the mouse cursor but no applications ever load. I think there is a problem that is preventing windows explorer from loading.
I'm not sure if this is related, but a few days before this started happening I received a Windows Action Center notice that the small.CA virus was detected on my computer. I ran Windows Defender, Malwarebytes, McAfee Virus Scan, and Emisoft Emergency Scanner, but none of them turned up any problems.
I'm able to run my computer through Windows safe mode with networking at the moment normally.
Do you know if this is a software problem and if so is it fixable? If it's a hardware problem, my computer is under warranty and I can send it back.

A:Black/Blank Screen upon Normal Windows 7 Startup

In the Advanced Boot Options where you chose Safe Mode with Networking there is the option to Repair your computer.  Give this a try.

Read other 2 answers

Booting up normally, I noticed that windows lately has had a harder and harder time loading the desktop.

Lately it won't load, the startup flag shows and the chime, but nothing follows as the hdd light seems to reflect a searching.

I can get in thru safe mode, but not normal mode.

Since the drive has about 1.5 years on it (thinking a wear issue), I decided to pop in a cloned O.S. and there is no doubt that this is clean. Same exact thing followed, which ruled out a software glitch and led me to the possibility of a hardware failure.

This sound like processor (Intel Core I5-4670K LGA 1150) or motherboard (Asus Sabertooth Z87 1150 ATX) or defective ram (Crucial Ballistix 8GB kit, (2) 4 GB Sport DDR3-1600 (PC3-12800_ [email protected]) ) or what?

How to determine?

A:Windows 7 - startup to blank screen - ruling out software

Read other 16 answers

I left my computer on over night on sunday, when i checked my computer late monday evening it just had a blank black screen on it. I rebooted the computer and it loads all the way to the winXP logo and then it displays this blank black screen with nothing on it. no sound no nothing. I tried starting "the last known good configuration" and the same thing occurs... i can start the computer in all 3 safe modes, but no other option works. i have no idea what to do. i didn't install any new software or hardware. any ideas?

A:blank black screen after windows logo on startup

Boot to safe mode, set your display for a generic vga, low resolution. Restart in standard mode, see if you get display. If so, start then, select correct display driver and try, step by step, to get back to where you were. If, somewhere along the line, you get the blank screen again, you should have an idea what happend.

Read other 2 answers

I have been struggling for two days trying to get to the boot up screen, since windows did a major update without warning. The machine is active and I have tried to use your script to get a bios reset without any success and as there is no terminal for an external screen I am getting no where. It would appear that windows has wiped out my screen drivers and changed the bois how is this possible. Debra  

Read other answers

Hi all,

Starting yesterday my computer would go through startup... while loading the desktop it would crash to blue screen with white text (unfortunately, I can't remember the exact error message). If restarted, it either goes to a blank black screen or back to blue, and I could only get the computer to operate in safe mode with networking. My antivirus software (avast free, malwarebytes)scanned and found no infections.

I have Windows 7, Samsung laptop.

Today, I was able to start the computer normally and am functioning with internet (still acting a little funny), but I am sure something is still not right. I also did a system restore last night, with the same problems (crashing, not starting up).

Any assistance would be highly appreciated!

Thanks in advance,


PS: I (goofily) started a similar topic in the "Windows 7" forum section without knowing this section was down here... Sorry! I tried to delete the topic/post but couldn't. Thanks.

A:Blue Screen with Error Messages, Blank Black Screen on startup

Hello,I will be helping you with your problems. Please be patient while I assist you.Some points for you to keep in mind while I am helping you to make things go easier and faster for both of us Please do NOT run, install or uninstall any programs, unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability. Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post. Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process. Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the top of your post, click on the Watch Topic Butt... Read more

Read other 14 answers

Hey, first time posting here, so sorry if this is the wrong section or anything.

Lately my laptop has been experiencing a problem when I boot it up. After the Starting Windows screen with the glowing Windows logo, a blank black screen pops up that lasts for ages (I'd say at least 5 minutes). Afterwards the login screen will appear as normal.

When I log in, the desktop appears quickly, but when I try to start any programs, like my browser, they are slow and freeze often (usually I can run programs with no problem when the desktop appears). Sometimes the laptop will hang every three seconds. It takes a bit of time before the programs and the laptop run like normal.

I've tried several things without success:
-Uninstalling and reinstalling graphics drivers (I've never updated my drivers because no updates are ever available for my driver; is that normal? My laptop is about two years old)
-Defragging hard drive
-System Restore (I don't seem to have any restore points)
-Clean bootup
-Startup repair (or whatever that first F8 option is called)

A:Blank screen on boot up, before login screen; slow startup

Welcome to Seven Forums Tienjt.

You can run this SFC /SCANNOW Command - System File Checker and post back with results.
Below my sig is a link to MalwareBytes, download the free version, update it, and run a full scan.

Have you installed anything new, hardware or software? Sometimes OEM's don't/won't have driver updates.

Read other 9 answers

Bonjour mes amis.

I recently have started getting the infamous black screen of death at my computer's startup, very similar to this fellow user's problem. Basically, Blank screen on boot up, before login screen; slow startup. The black screen lasts at least two minutes on average, before the windows login screen comes up. Everything else runs fine!

I think it might be my antivirus, Bitdefender Total Security 2013, and I've posted on their forums about it, and I've gotten responses from other users saying:

The Black screen issue is known by BD Support till now they have not able resolved that issue.
hope BD 2014 resolves the issue.

And the booting time issue is been solved.

However, I uninstalled Bitdefender and the problem still persisted. I proceeded to uninstall every program i could remember installing before the problem started, so before the start of June. This was painful because I updated all my software, so everything was listed as installed recently.
My startup time after removing all these software is attached below; 156 seconds, compared to before with the speed ranging from 200-500 seconds, with the worst at 472 seconds.

Although this sped about my startup, I still got the annoying black screen issue. I am sure it is a software issue because the black screen is present, but lasts no longer than about 5 seconds when starting in Safe Mode with Networking, and is present even int he low graphics.

What should I d... Read more

A:64-bit - Blank screen on boot up, before login screen; slow startup

Hello mate try some of these Troubleshooting Steps for Windows 7 start at point 15 then do chkdsk Disk Check

The go through the other stuff.

Oops should have mentioned this one too start at point 7 - option 3 Optimize Windows 7[2]=Performance Maintenance

Read other 8 answers

Hi All, Hope you all are well and doing best in your job. However, I am bit scared as my laptop has some issue and my work is pending because of this. Here is the detail description of the problem. When I start my PC, it starts the screen light. Just in next moment, a bright white color flash goes through for a fraction of a second and then screen remain blank. I have tried hard reset, BIOS update as suggested in following link.http://support.hp.com/us-en/document/c03518165 However, when I connect it to another monitor, it starts good. I can access my PC from another monitor. but not from  its own screen. I tried to find the drivers and softwares but i did not work. I would really appreciate if you help me in resolving this issue.

Read other answers

Hey BleepingComputer community,
I am having trouble with my Gateway GT5685E desktop that i upgraded to Windows 8 from Vista HP. After a few months of installing it, it suddenly crashed. It starts up, but there's a blank screen, no POST, no cursor, nothing. At first, I thought it was the mobo graphics, but after I bought a new NVidia GT610, it still hasn't worked. It has an Intel Core 2 Duo E4600 @2.4 GHz. Can it be something else, like the PSU, the hard drive, memory, or even the motherboard? Please I need replies ASAP because I use this computer everyday.

A:Blank Screen on startup

Hi terrytek,
Did you get this resolved?
I understand from your post that you've been using Windows 8 for several months without any issues but recently it will not power up or perform a POST.  Is this correct?
I am going to assume you are fairly competent with installing hardware since you've stated you purchased a new graphics card and it hasn't changed anything.
Basic questions I'm sure you've already checked but humour me:
Do you see any power lights on the front of the case?
Do you see any lights on motherboard to indicate it has power?
I have seen issues like this before on older ASUS boards. What I've done in the past is remove the CMOS battery for a little while.
To do this, ensure the computer is unplugged for the mains, remove the CMOS battery from the motherboard and leave the battery out for 15 seconds. Put the battery back in and power on the computer. 
Does anything happen?
Thank you.

Read other 6 answers

I hope someone can help me with this one.

When I start up my PC, it loads up to a blank screen (with the arrow from the mouse which I can move around the screen). I have no idea what could be wrong. I left it on for hours hoping that Windows would finally appear but it doesnt.

I tried running in Safe Mode and Last Known Configuration. Both result in the same problem. (For Safe Mode, the words "Safe Mode" appear on all four corners of the screen by the rest remains blank.

Any idea what the problem could be? I can get into System Recover. Would that solve the problem? I really need to get into the my system soon!

A:Blank Screen on PC Startup

Can you access Task Manager? If so, try starting explorer from there. Otherwise, I would try system restore or system recover.

This happened on my XP system a few weeks ago, had to resort to a boot CD to access the drives. Seems some malware had edited the registry, so XP was running but I had no input (trying to invoke task manager got me a message stating it had been disabled); it also trashed a 320gig slave drive (from which I'm still trying to recover files). After several days of cursing, trying to restore registry backups, system restore, etc. I could never get a useful start from the HD; finally gave up, reformatted, and reinstalled XP. Hope you have better luck.

Read other 6 answers

Hi, I have a DELL Inspiron E1705 and when I try to start Windows XP, the computer may appear to stop responding (hang) with an empty, black screen immediately after the power-on self test (POST) is complete and before the Windows XP logo typically appears on the screen. I've tried rebooting in safe mode, last configuration, taking the battery out and many others. Nothing seems to work! Control Alt Delete just sends it back to POST and then a blank screen once again! I called Dell and they said give them $ & they'll answer my problem! Lol

Any ideas? Please? All my work info is on it and I need to get it up and running soon! Thanks for any advice!

PS! I was running spyware & AVG but it seemed to have gotten hung up overnight so I restarted the computer this morning due to it being frozen). Thus, I'm almost positive a virus initiated the problem.

A:Blank Screen on Startup

Hi, do you have an XP CD at hand?

Read other 3 answers

Hello All,

As the title says I start up my computer and get blank screen. I have tested with 2 monitors so thats not the problem. I have changed the ram so that appears not to be the problem either. I have made a vid:


and heres a pic of my motherboard:


Any suggestions would be welcome.
The computer was shipped from poland to Ireland, something must have gone wrong on the way.

A:Blank screen on startup

that green cable with 4 connections is for a different sort of motherboard.
when you start this there is no beep from the speaker - see if you can reconnect this and then tell us how many beeps you get when you turn it on, One beep is good - many beeps is not good but should give a clue as to what is missing.

Is the voltage setting correct?
I noted from the video that the power light and the HDD lights looked as if they were already on before you started the system - is this so?

Read other 6 answers

I recently left my computer on overnight. When I woke up I found that it had turned off, sort of. Everything was powered on, but the HD was not reading and the NIC lights were not flashing. I have it set to never go to sleep, in the BIOS as well as in WinME. I pushed the reset button and ever since When I power it on it enters the same state: the monitor won't come on, but the HD and all the lights come on, but the HD stops reading after about 5 seconds and it just sits there after that! Please help!
system specs: AMD K6-2 500, Asus P5A MB, 128 MB RAM, Riva TNT v550, 30 GIG 7200 ATA/100 HD.

A:Blank screen at startup

almost makes me wonder if the cpu didn't fail. Usually what happens when you don't seat a processor correctly.

Read other 3 answers

Hi all,

I am having a problem with my xp. It only started happening today. During startup the screen goes blank for a min or two before the login screen appears. Then it appears and everything seems to be normal. It never did this before and i dont know what is causing this. I would appreciate it if you could help me?

P.S. I downloaded a racing game that required me to disable my cd drives to play. I did so and the game worked fine. But the problem occurred when i restarted the computer. I'm not sure if it is related or just a coincidence or even a spyware.

Danish Ajmeri

A:Screen goes blank on startup

Well, first of all welcome to the Tech Support Forums. I would try runing some virus/spyware programs, just go make sure that's not it. I wouls suggest Ad-Aware, and Spybot, for anti-spyware/adware...and AVG, and trend micro's online scan avaiable at http://housecall.trendmicro.com.

Read other 1 answers

Hi guys,

I'm having a problem with my old computer...

Whenever it starts up, it'll go through the boot process... memory check, cd drive check etc etc... but when it usually loads windows it just goes blank. Its a black screen but its definitely not the monitor as i have tested it with others... could it be my video card?

It could be windows too I guess, but i reinstalled it about a week before it stuffed up and it worked perfect... I am running windows xp and its a really old amd computer but has run without any problems for ages.

Thanks for any replies.



A:Screen goes blank after startup

Try Safe mode (repeatively press F8 function key on Windows Startup)
Then go to Device Manager (Start-->Run-->devmgmt.msc)
Click the + sign on your Display Adaptor to expand it
Then right click on your actual Display device, and uninstall it

Go back to Normal mode (ie Restart)
Go on the web, and download the most up to date driver for your Display card (from your manufactures support page)

Read other 3 answers

I'm having a problem on startup. I have a HP dv2500t Notebook running Vista Home Premium.

I left the room for about an hour and when I came back, I had a BSOD. I didn't think to write it down.

When I try starting my laptop now, nothing happens. The screen comes on (turns a different shade of black), but stays blank. No HP logo, no Windows, no nothing. The HD light flashes every once and a while but nothing else happens.

I looked on the HP site and they said to reseat the memory. Is this possibly the problem or is it just a generic fix-all? I thought it had something to do with the BIOS being jacked up. Is it possible the BIOS has gone corrupt? Anybody have any suggestions?

A:Blank Screen on Startup

I have read of some issues with some BIOS levels not resuming from standby/sleep/hibernate properly. When you get it back up you might search for that.

While not theoretically impossible, I have never heard of a BIOS being corrupted without overt action on the part of the owner, as in a failed BIOS upgrade.

Reseating the memory could force the machine to recheck installed hardware, which, if you are in a repetitive loop of failed restarts, might break you out of that.

Read other 8 answers


I know this problem have been brought up a bazillion times. Before I posted here, I've tried possible solutions that were around in this forum and on the net. But maybe it's because I'm doing it wrong (my first computer ever), the problem still persists. I'm posting this from my school computer, btw.

I bought a Toshiba netbook NB205 about three months ago. It was working perfectly fine until two days ago. When I turn on my computer, it goes all the way to the windows xp startup screen...and then blank. Nothing. I've waited for a while since I thought it was just taking long to load. But after 30min, I gave up and manually shut it off.

I pressed the power button again and the screen goes to the whole "windows did not shut down properly" part. I've tried everyithing there but the problem is still there. I've tried pressing F8 and the possible solutions there, Fn+F5, removing the battery/unplugging the AC cord and pressing the power button for 60 seconds, etc. but nothing worked.

The only thing I didn't try was the using an external monitor one since I do not have a cord for it nor do I have any external monitor.

I'm just wondering if there is any other way to fix this than the ones mentioned earlier. Or do I have to bring it to a technician? And are there any ways to prevent this from happening again?


Read other answers

I tried booting up my XP today, and it went to a blank screen, with a flashing ___ line. That's all that was on the screen. It's right after the press F2 for setup and F12 for w/e else.
I've also tried hitting both F2 and F12 and nothing happens. After a while, and a little messing around, i finally got it to boot up just fine. Is there any way to stop this from happening again? If not, what will become of this? It is a fairly new Dell Dimension 3200 i think.

A:Blank Screen on startup?

You may have a dodgy master boot record.


Read other 2 answers

Not sure what is going on...we had the power company shut of power to put a new poll in without notifying us while I was using my laptop, now I am having issues.

Dell Inspiron 6000 with Vista home premium...

When I start it up it gives me a screen that says that Windows was shut down improperly, giving me options as to how to boot. I tried hitting F8 and starting from the last known safe spot but no matter what option I try it acts like it is trying to start up and then I just get a dark, blank screen -- although I can still see and move my mouse.

Any ideas would be great and thanks in advance!


A:Blank Screen On Startup

I'm seeing a lot of these recently - I suspect a conflict between a Windows Update and an older video driver (but have no evidence to support it). I've only had my hands on one of these since I've started suspecting this - and it didn't have any evidence (nor could I recreate the issue).

Are you trying the Last Known Good Configuration - or the Safe Mode - or both? If you can't get into Safe Mode, you'll have to try repairing it with the Vista DVD.

Read other 5 answers

this morning when i woke up i started my laptop got a message saying to log on use ctrl-alt-del did not no why it showed that to me so i restarted the laptop to see if it would go into safemode would not go into safemode so i restarted the laptop again and now i get a black screen will not load windows or go into safemode can someone give me some idea's please ?forgot to mention the lights are all lit up green on the laptop but nothing but a black screen

Read other answers

When push on the power button i heard fan (or HD) run, the screen light but any info appears. The screen goes on and off (the screen not the laptop) continuosly every few seconds.Tried some solutions from HP site but without results.When Windows button + B + power on are pushed, the caps lock blink twice then pause continuosly but none happens.Couldn't verify the RAM because not found instructions for to remove keyboard.. (model is 15-G000SL). I found a similar problem on this board, they says to update the BIOS, i downloaded BIOS to a USB key, but dont know how to start it, if that is the solution to try. Can someone help me?

Read other answers

I don't recall my operating system, I know it was XP I don't remember if it was home or not because its been such a long time since I used the computer,...but a long time ago I came home and turned on my computer and it just went black...as if the monitor wasnt hooked up. I have a feeling somebody did something because it worked totally fine before hand and nobody in this house fesses up to anything...but thats besides the point, anyway...before I go and format a harddrive and instal windows to try in the computer I was wondering if that sounds like anything anybody might just know what happened. I know a long time ago on another computer I had I was tweaking stuff out i think in CMOS and i did something a little bad and it did the same thing, but I know nobody would even attempt something like that on my computer...
if theirs anything you can think of off the bat, even if theirrs 10 different things please let me know..Id rather not pay some douchebag to fix my computer....

Read other answers


running windows xp home on an ibm laptop.

I disabled the vga driver and after restart cant see anything after the windows logo / splash screen.

-> restarting in vga mode still wont let me see anything
-> restarting in safe mode hangs at .../Drivers/Mup.sys

not sure how to re enable the vga driver...

thanks for your time.


A:Blank screen after startup

Reboot your computer, press F8 during the boot process, use the arrow keys to highlight Last Known Good Configuration, and then press ENTER.

Read other 29 answers

A couple of days now, whenever windows 7 is started up it gets past the CD Checking cursor blinking screen and then goes blank for a few seconds before showing back when the desktop is showing. For some reason, it no longer shows the logo or the "Windows is starting up" blue screen. It skips those screens and stays blank for the remainder of when they should appear and comes back on at the desktop.

A:Win 7 - Screen goes blank after startup

I would suggest using System Restore to reset your system to a point in time before this issue started happening.

But, I would wonder if it's necessary since the Desktop is coming up normally.

If this is a precursor to the KSOD (Black Screen of Death), I'd suggest backing up your stuff and setting new System Restore points "just in case".

Read other 1 answers

hey, I have a HP Pavilion Elite, OP windows seven.
The problem i have is when i turn the computer on, it goes through the RAID boot up and the Ethernet Boot up. But after that, all I receive on my monitor is a blank black screen. if anyone knows how to fix this, that would help a lot. Thnx.

A:Blank Screen at Startup

What changes did you make prior to this happening?

Is this new behavior with a RAID then Ethernet boot? Do you have RAID?

Read other 3 answers

I have a HP Stream I bought on a back-to-school sale this year. This morning when I opened it and turned it on, all I got was a blank screen. Sometimes the screen shows the curser by itself and sometimes the cursor with a blue circle but most of the time, nothing at all. I have tried turning it off and restarting it several times. I have tried closing it and opening it. I have tried turning it off, closing it, opening it and turning it on. The same results every time, a blank screen sometimes with cursor and blue circle. I have tried advice on this forum to do the following:Boot the computer normally and log-in. At the black screen, hold down the ctrl and alt keys and press delete. Select Task Manager. There are several other steps, but the CTRL+ALT + DEL does nothing. All I get is a blank screen, so there is no way I can select task manager or anything else.   I am not sure if it is a WIN 8 32 bit or 65 bit or 8.1 but I have listed the model # if that helps. 

View Solution.

A:Blank Screen on Startup

Hi @jdsullivan411?,Welcome to the HP Forums! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. Thank you for posting. I have read your post, and I understand that you got a blank screen when you started the stream book. I wanted help. What is the product number? BCM943142 HM did not locate the product. Please try a hard reset as explained on the link below:HP Notebook PCs - Computer Does Not Start (Windows 8) Let me know if it worked. To say thank you, click on the "thumb up". Accept the post as solution, if your problem solved, so other people have the same issue can see it. Good luck,

Read other 4 answers

My problem is similar to mooremny because my DELL Latitude D810 hangs with an empty black screen after the Windows XP page has finished scrolling across the screen at start up. It will not show the Welcome (Click your user name) pageIt will boot up fully in Safe Mode and the Welcome (Click your user name) page works ok.I followed elise025 instructions in the similar post by inserting the XP CD-ROM but it still won't boot up in normal mode (I checked the Boot Sequence on the BIOS page and it shows 1.Diskette Drive on top of the list.I uninstalled my AVG anti virus progamme in case that was the problem, but I still have an empty black screen in Normal Mode. I also ran CHKDSK but all seems to be ok with that utility.This problem originally began after I had successfully booted up in Normal Mode and read my emails. then I closed the lid and when I re-opened it an hour later it showed an empty black screen. It usually shows the same page that I was working on previously.I'm hoping you can solve my problem too! Many thanks

Read other answers

My Lenovo ideapad u430 touch has developed a new issue since a week. It's about 1.5 years old. Never been dropped or damaged in any way. Been working fine till now. When the laptop is restarted or started from an off state the laptop turns on with lights and sound of fan, but the screen is blank. No lenovo logo nothing. Cannot get into bios setup either. No new updates or new devices added or anything like that. My solution was to force turn it off and start again. If I leave it there off for 30 mins to few hours and try again, it starts fine. This was few days ago. I used that trick for 4-5 days. Now it doesnt seem to start normally at all even after repeated on and offs. I don't think its a display issue.I have done all obvious things like opening it up and cleaning, connecting external monitor, removing and reinserting ram etc. Any insight on this is highly appreciated. Thanks.

Read other answers

Blank screen at start up and you don't get a boot up that I can tell.have done what was proposed on previous post. But nothing has worked. 

Read other answers

Originally I posted my malware/trojan problem in this thread as I thought I was a simple victim of the google redirect virus and other tiny annoyances


It also mentions how I could not provide a gmer log on account of the computer crashing every time I ran the program. An error log is provided in the thread as a replacement.

However while surfing the net my computer suddenly slowed down, developed a black screen then rebooted itself. After the HP splash screen I get a black screen with a blinking cursor. Here are the steps I tried to fix it.

1. Hitting F8 (for safe mode) just generates single beeps (one for every button press)
2. Hitting F11 (System Recovery 11) just gets system beeps as well (one for every button press)
3. Checked RAM sticks to see if they're working. Both the ram and the ram slots are working fine
4. Do not own a vista start up disc on account I bought a laptop and the OS was already installed in the system.

Computer basics
OS: Windows Vista
Laptop Model: HP Pavillion dv6500

A:Blank screen on startup

Please wait until you get assistance with your malware log topic.

Read other 2 answers

Every time Windows does those mandatory updates, I cant use my computer anymore.  Usually I can find a solution, but not having luck this time.  So...at first, I would see the hp logo and then it would go blank.  Now when I start up, it's just blank.  I tried F2 diagnostics and no problems.  Can't boot from my recovery disk.  Don't really know what I'm talking about here. Just tried things I read.  I have no idea where to take it for repair except BB and I'd rather not.  I'm assuming it's an easy fix and I'm cheap.   I would welcome suggestions on this specific issue and/or how to stop these problems in the future.  It is continually frustrating. Do I just have to turn off all updates?  Wouldn't that cause other problems?

Read other answers

So i recently got a new graphics card Geforce 9800 GT and my monitor was VGA/VGA and worked fine so i brought a adapter but my monitor wouldn't doa nothing the green light would come up but it would stay black. Since i thought it may have been the graphics card i tried a monitor that i brought about 10 years which was also VGA/VGA but it worked perfectly i was shocked because it was so old. but now i'm using a old screen which isn't that great but manageable.

Btw my monitor is AOC N19W and my old one is a CTX S500. Also i've double triple quadruple checked the cables

A:Blank Screen on Startup

Bad RAM can mess up all sorts of things, I don't know the details, but what they said is correct. Try using just one stick of RAM at a time and see if that makes a difference, if is the RAM then you can pinpoint which one. Also try them in different slots, sometimes one will work in one slot but not in another, although if it's a RAM problem likely it's a faulty stick

Read other 3 answers

I have reinstalled my OS about 3 times. However, 'time after the installation' I still have problem where my computer boots up and I have a dark screen. I normally have to reboot it about 1 to 4 times.

When I go inside my machine I wear antistatic wrist band. The disk I used to install the OS is not damaged. The hard drives both OS and aux/misc. use are in working order. Cables are all connected. Heck screws aren't touching the board from the last time I had to take out the mother board.

Any suggestions?

Also I in some instances would get a freeze then blank (black) screen while performing normal activities on my computer.

I don't know what is going on?

A:Keep Getting Blank Screen @ Startup.

Read other 6 answers

I just accidentally downloaded a nasty virus. When ran, it installed itself and shut the computer down. When I tried to start it up again, a blank screen appeared after Vista's loading bar, and before the welcome screen and Vista logo. When I go into safe mode, the computer crashes with a blue screen after a minute. I managed to disable all services and processes in msconfig before it crashed, but it still does the same thing.

After some more googling, I tried pressing Alt-Tab, and 2 applications came up, both with Vista's default icon. The first didn't have a name, and the other was titled Windows Logon.

A:Blank Screen on Startup


Are you still having this problem? If so, when you get the blue screen, what does it say? Also, what kind of computer is this, as in make and version number, eg Acer 5230 etc.



Read other 3 answers

Hi there, I read a couple posts related to this problem but none have seemed to properly address or solve my problem so far. I'm running Windows XP Pro on my laptop and apon startup my computer screen will show the Windows logo and then go blank and continue to startup. I can hear the icon popping sound once the startup has finished. The strange thing about this is that when i tap my power button, the closing jingle happens and then it shuts down. Normally when the screen is working tapping the power button won't to anything unless I hold it down, then it will inproperly shut down. So far this the only way I am able to get my screen to work, after shutting down i simply restart and most times the screen then works the second time around. Any help would be great, thanks

One other small problem, my battery icon wont show up on my task bar, I have insured that the ALWAYS SHOW thing is ticked, and it wont turn on unless plugged into power and once plugged in, is constantly charging but never does increase its battery power.

A:Screen blank on startup

I have a very similar problem and am still trying to find out why it happens,but some info is avalable on this site http://www.ezinearticles.com/?What-To-Do-When-Windows-Wont-Boot&id=16309 and also this one http://techrepublic.com.com/5100-10877-6031733.html# write back if you have any success...

Read other 1 answers

For the last few days, each time I start IE 5.5 I am taken to a blank screen. My home page is http://www.google.com and that's what appears in the Address bar, but the screen is blank. "Done" appears in the Status bar at the bottom. When I hit Refresh, the regular Google screen appears. And I noticed just now that when I came to this forum, a banner appeared at the top, but nothing else until I hit Refresh, making the Tech Support Guy home page appear. I use a Dell Dimension desktop running Windows Me. I tried deleting and reentering my home page, but that didn't solve the problem. Any ideas on how to avoid having to hit Refresh? Thanks.

A:Blank screen at IE startup

Read other 6 answers

Bit of a problem here. I just got a new Firewire PCI card and attempted to install it. I got it in alright and closed up the case. When I tried to turn on the computer, it would do the memory check, show the bit at the bottom that allowed me to go into the BIOS etc. but before I get the "Starting Windows XP" screen, everything freezes and the screen goes blank. I've already tried taking out the card, but that didn't help. Every time I restart the computer it does the same thing.

A:Blank Screen After Startup

Go back in and be certain the ram is in right and all pci cards are reseated...then reseat all plugs on drives etc...I would bet you bumped something when you installed the card.

Read other 3 answers