Over 1 million tech questions and answers.

DHCP Server Issue

Q: DHCP Server Issue

I was created a DHCP server in Server-2008 r2 but it didn't provide IP automatically to client and on the other way in the roles sections when I click on DHCP, it didn't expand as other roles expand.
Please provide the solution.
Shashank Saxena

Read other answers
Preferred Solution: DHCP Server Issue

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


I'm working on a W2K server, set up as a DHCP server, has 2 NICs although 1 is disabled. I'm trying to figure out why the server is registering the loopback address now although the static address is still configured properly? How do I fix this without uninstalling and reinstalling DHCP?

A:W2K DHCP server configuration issue

Upon double checking, it wasn't bound to the NIC. It wouldn't let me remove and readd the server, although this should have been permitted. I ended up uninstalling and reinstalling DHCP to fix the issue. If anybody finds an answer to this issue.....

Read other 1 answers

My home network is supposed to have a typical IP range of and subnet of, but for some unknown reason, the DHCP server is not assigning the correct IP to connected devices.  As a temporary solution, I've been manually assigning
IP addresses to each and every device in my network.
I'm not sure how can I revert my network back to normal.  It was running fine for several months and suddenly this issue pops-up.  At present, the DHCP server seems to be not working at all.  If I tried to obtain IP automatically, I will get
the following IP and subnet mask: (Preferred)
I've tried to disconnect the potential devices (2 WiFi Repeaters which are set to AP mode - their SSID <g class="gr_ gr_706 gr-alert gr_gramm gr_inline_cards gr_run_anim Grammar multiReplace" data-gr-id="706" id="706">are</g>
MYS-1stFloor and MYS-2ndFloor) that may be causing the DHCP conflict and restarted the entire network, ensuring that only the intended DHCP server (the main router from my ISP) is connected to the network switch, but it doesn't work.  Somehow, an unknown
network by the name of "MYS-1stFloor 3" appeared when I am connected to the network via LAN cable.  I have no idea where this network comes from.
Is there any way to check which device is taking over the role of the DHCP server?  Or maybe my router is faulty so its DHCP function i... Read more

Read other answers

I'm having issues connecting to the internet with my desktop computer through my wireless router (my laptop works just fine). If I connect LAN directly to my modem the IE works jsut fine, but if I connect WAN or LAN to the router I can't seem to get to the internet. The connection shows that it is connected in the network connections area, however. I've gone through the settings on my laptop and they match what I have on my desktop, so I'm lost as to where to go next. Is this a DHCP server issue?

Oh and the most frustrating part, is that on a fresh reboot, you can log right on and IE will work for one or two pages, and then the error page comes up. It also seems to be runing IE more slowly than it used to. I've run spybot and my norton and both are clean to see if it was virus related, but I'm just an ametur so any suggestions are appreciated!


A:Internet connection issue (DHCP server?)

So are you saying that when your desktop computer is connected to the router via network cable, your IE won't work? And if you connect the computer directly to the modem, IE works?

Since you have a wireless router your laptop works fine which is good. Hmmm...........on the desktop computer I would try to un-install IE and re-install it again and see if that helps. Also perform a windows update on that desktop computer.

I would also try to perform a windows repair and see if that helps as well.

Read other 2 answers

I need the IP address ,DNS and gateway address so on .Is it possibile to get it from the modems DHCP or do I need the ISP DHCP working?

I'm setting up are home network and getting connected to the internet but the internet connection is down .But is it possibile that I can get this from the modem. .

Like how does the computer talk to the modem and the modem talk to the DHCP server .I never had this problem before.

A:Can you get DHCP info from the modem software even when the DHCP server is down

Read other 8 answers

I'm running a simple network at home with a Linksys BEFSR41 router. I have two computers hooked up wired and a wireless router acting like an access point that I use for my laptop occasionally. Until this weekend I've been having no problems but I shut down the computers due to weather and now one of them is not able to communicate with any others on the network. The problem computer will get an address supplied to it by the router (DHCP server) but once it has it I cannot get any other connectivity. Of course this is hindering internet access on this computer. I can ping the loopback and assigned IP addresses w/o problems but when I ping the default gateway (router) and/or the other computer I get "Request timed out." I initially thought it was the NIC so I bought another one but still get the same issue. I've moved the cards to different PCI slots but no luck. I tested the cable running from the computer and the router but found no problems. I even tried resetting the TCP/IP stack but still didn't work. The computer in question is running WinXP SP2 with the original NIC being a Linksys LNE100TX and the new one being a D-Link DFE-530TX+.

Any clues on this? If more info is needed let me know--it's been a while since I've posted. Thanks in advance.

A:Solved: Getting IP addr from DHCP but cannot ping DHCP server

Read other 11 answers

Is it better to use Win2000 Server DHCP or DHCP from my Netgear wireless router?

I am currently in the process of setting up a Win2000 server on my home network which consists of four other 2000/XP machines.
The server is going to be configured as a domain controller and will utilize the Active Directory.

Should I use the Win2000 Server DHCP or stick with my wireless router as the DHCP server? What are the advantages/disadvantages to both and which would be easier to maintain.

Is a 550mhz PIII with 256MB RAM fast enough to make a good home server running Win2000 server?

The server is going to have (2) 120GB Western Digital 7200rpm drives with 8MB cache for storage and a single 60GB Western Digital 7200rpm drive for the OS and few other applications.

The server's primary function is to serve as a media server with an approaching 10GB of MP3 and music video files which is continually going to grow. Disk contention is at a minimum since there are only four PC's on the network. There will also be a lot of digital photos stored on the server and will also serve as a place to perform backups from the other four networked PC's.

A:Win2000 Server DHCP or Router DHCP?

We have a similar setup in our office using Small Business Server, a public IP coming into our router with DHCP turned on, connected to a NIC in the internal DHCP server (which is also running ISA). A second NIC in the server bridges to the internal hub to provide DHCP services to the clients. This way we control port filtering in 2 places and with 2 levels of NAT taking place we feel secure. It may be overkill but we're concerned that EVERYONE is trying to hack into ISA and DHCP servers connected directly to public IP that this setup provides an added level of security.

Read other 1 answers

My WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150).

Ipconfig /all shows the IP address as but this is determined by an entry in the registry at HLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{39A...} > 'DhcpIPAddress' - REG_SZ - Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically ( and getting internet fine.

After much searching I can't figure out what's wrong.

I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.
Tried setting the IP manually to - limited connectivity goes away but I get no internet connection from the router nor file sharing.

Any help please?

A:Solved: DHCP IP by registry not by DHCP server??

Read other 8 answers

I'm running Remote Server Administration Tools (RSAT) on Windows 7 Professional 64-bit and I've noticed that when I run the DHCP Management tool (DHCPMGMT.MSC) and I add our DHCP Authorised server then close the console, it forgets the DHCP server and I
have to re-select it next time I use the console. 
On the other hand, the DNS console remembers that I've used a particular DNS server even after I close the console.
Wondering why the DHCP Management console is so forgetful?

A:DHCPMGMT.MSC in Remote Server Administration Tools (RSAT) won't remember DHCP server

This is by design.

Read other 10 answers

IP Network: Dhcp server works fine. (CISCO ROUTER)

Windows 200o servers, Windows 2000 clients (up to dated, sp4, rollup1 etc) IS6sp1

Some pc's with IP dhcp , works ok
Some pc's with fixed IP, works ok

After changing fixed IP on a client to dhcp-IP, the client can not find the DHCP server.
change back to fixed IP, PC works fine again.

DHP server and other DHCP clients still working fine

Local Area connection status: only outgoing packets, no incoming.

reboot, or ipconfig /renew no solutions

Does someone know this problem ?

Read other answers

I'm messing around with W2K Server at home and can't seem to get it connected through my cable modem to my ISP's DHCP server. I know the cable and connection are good because it works on my W2K Pro workstation. I've tried ipconfig /renew but that's when the error occurs that it can't find DHCP. I can successfully ping the loopback address. The NIC is set to use DHCP.

Since I'm just becoming familiar with Server I'm sure there's something I'm not configuring properly. Suggestions?


A:W2K Server can't find external to DHCP server

Read other 6 answers

I was trying to use tftp32d to pxe boot machines however, I couldn't get the DHCP server that is built into that program to work and eventually got angry and gave up. When I had some more patience, I started trying it again and it worked immediately without any settings changed.

The reason for my post is because it stopped working again. I can't figure it out and it's driving me nuts. Could this be an issue with the setting where you can select which network your own for example work, home or public location?

Read other answers

Red Shield - IE Enhanced Security Configuration for Administrators
Amber Shield - IE Enhanced Security Configuration for Non-Administrators
Green Shield - IE Zones
When I click on the how to correct this it takes me to a Windows 2003 page not 2012 for the first issue

And page does not exist for the second issue ?
Any ideas ?

Read other answers

Not getting IP from Dhcp server.
Checked in Dhcp Error Showing BAD Address.
IP 20-25 % IPs are showing free..

Read other answers

running winxphomesp2 on abit kt7-333 with intel 10/100pro V onboard networking

working fine then suddenly this morning while browsing ( no downloads / no installs)
systray icon shows yellow ! and loses connection

router is linksys wrt54g default gateway

ip num changed to
ipconfig /release clears ip
ipconfig /renew fails due to timeout
no other comps online affected

ip config /release then boot
reverts to 169.x.x.x

uninstall network device and boot
windows new device found wizard opens locates identifies installs driver
tcp/ip auto configured to get ip auto get dns auto dhcp enabled
renew ip fails timeout
ip defaults to again

connect pc directly to cable modem
reset cable modem and boot computer
no effect

nic shows enabled and working normally but no connectiivity to lan or internet

any ideas what why how happens
what to do to repair
what to do to avoid repeat
do i have to get a pci nic and disable this one in bios?

A:Can't get IP from DHCP Server

run this command in the command prompt tool

ping localhost

and post results


Read other 3 answers

I had to reinstall windows2000. When I went to load Road Runner it can't release/renew an IP address. The modem is fine. The router is fine. The other computer in my house sees the internet but my does not. Can someone give me some idea on what to do? Thanks.

A:DHCP Server

Read other 13 answers

I'm using a DHCP running on Windows 2k3 server. What could be the problem if every time someone using his cellphone connects to the network, the internet connection automatically drops....

Read other answers

Right now I have my server connected to a router and the router does the dhcp for me. I am thinking of putting a second nic in the server and using it for dhcp. If I have computers in the house that are not a part of my domain will I still be able to get online with them if they are connected to my switch? I guess to paraphrase myself I am asking can you use a server to route and not have everyone connected to the server in your domain?

A:Server DHCP or No

I'm not sure what DHCP has to do with routing... Are you trying to break your network into subnets?

You wouldn't need a second NIC to move DHCP to your server. If you want to move DHCP from your router to your server, just set up a new DHCP scope on the server and that's all that's required. Clients do not have to be part of the domain to get an address from a DHCP server.

Read other 1 answers

Here is my current configuration:

We have 7MB/768K DSL Business dynamic IP connection.
Anywhere from 10-20 simultaneous users.
One Cisco 30 port switch feeding into one Linksys wireless router to provide local IP addresses to all the users for the one IP address to the world.

It seems to me we have a huge bottleneck at the wireless router but we need it for the DHCP server in that router.

Are there any low cost solutions that would provide faster performance for the users?

A:DHCP Server (Do I need one?)

Hi skibizkit, and welcome to TSG.

skibizkit said:

... provide local IP addresses to all the users for the one IP address to the world.

It seems to me we have a huge bottleneck at the wireless router but we need it for the DHCP server in that router.Click to expand...

Sharing a single Public (world) IP address with multiple Private (local) IP addresses will require some type of router that supports NAT (Network Address Translation). Running a DHCP server on the router should only add a small amount of local bandwidth usage when a computer first connects to the router and gets assigned its private IP address by the DHCP server. The DHCP server is then out of the picture until another computer comes on line or the DHCP lease time (could be up several days) expires for each computer.

Is the speed bottleneck related to accessing the Internet through the DSL connection or exchanging data between computers (and servers) on the same local network?

Read other 2 answers

Anyone here have any experience implementing Microsofts dhcp-server-callout .dll? I'm considering using it to deny any rogue devices plugged in to my network. Here's an article about it:

http://www.petri.co.il/filter-mac-address-windows-server-2008-dhcp-server-callout-dll.htm .

Read other answers

Work in school with about 35 w98 clients and nt 4 server, recently had broadband installed so I had to change the IP address on the server as requested by broadband company then set up new dhcp scope for clients. Server reboots with new ip but cannot release and renew ip addresses on clients. (I had logged them all on ready.) Activated and reactiveted scope, changed ip back to orginal it all works but when you change it back to new settings clients can't see server, I gave one client a static address from the new range (an excluded number) and it logs on sweet as a nut - so I'm thinking dhcp problem. Also when I do IPconfig on server it gives 2 nic addresses for one mac address why?Any help would be appreciated!

A:nt server dhcp problems

Begining is the best solution!! hehe! So, You should do your DHCP as a new one, anyway, you were given a new IP, so it's absolutely new, isn't it!
Try mine!
Seperate DHCP from network, simply unplug the connector!
Stop DNS, delete your DHCP scope.
Uninstall, yes, uninstall you NIC!
NEXT! Do it in reverse!
Reinstall you NIC by restarting Windows! type cmd in Run command and ipconfig /all. How many NIC you have now? ( ofcourse, after you set the static IP, subnet...)
Restart DNS.
Create new DHCP scope, activevate,... ( Be sure you do it completely right).
Now, renew until DHCP work, ( Until you see the green light, you knew it).
Now, test DHCP in client by plug the connector!
Try this first!

Read other 1 answers

Just need to know because thats what it says on my other computer that im trying to use the router with

A:How do you contact your DHCP server?

kcplayboi_26 said:

Just need to know because thats what it says on my other computer that im trying to use the router withClick to expand...

If your PC is set to obtain an IP address automatically at boot up then it uses a DHCP broadcast system, this system sends a DHCP request via the network software through the network card and through the network cable out on to the network, if a DHCP server is available then it will reply and your PC will be given an IP address by the DHCP server,

DHCP servers can be a router, a PC running Internet Connection Sharing, or a PC running a DHCP client (such as on windows 2003 server).

If your PC cant find an DHCP server and you have it plugged into a DHCP server then either the cable is wrong or faulty, or the DHCP server is not seeing the PC.

Please post back saying what exactly you are trying to achieve.

Read other 5 answers

You may be thinking at first that this would be a typical 169.x.x.x thing, but it is far from. I've tried doing the winsock and tcp/ip fixes and nothing seems to work. There are two PC's currently on my topology, and my PC works perfectly fine. So it is apparent that the other computer has a phony DHCP server hosted locally on the other computer.

The Router:
Router's DHCP range:
Offending computer's IP: !!!???

I have run the Smitfraud fix and in the log file it returns some pretty interesting entries regarding this DHCP server. I tried deleting the offending registry keys listed in the log file, but to no avail.

Tried disabling the DHCP service, tried assigning statically, nada.

So it would appear that it has been hijacked, but i have no idea how to remedy the situation. Any ideas?

A:Phony dhcp server

Read other 7 answers

I Just set up a wireless network everything works fine, other laptops, wii... but one laptop with vista sp2 connects to router but not to internet. did the ipconfig and wireless lan DHCP enabled ethernet " " enabled. but the tunnel adapter (4 of them) are not enabled. can someone please help me? it connects fine to my brothers homes network.

A:Cannot connet to DHCP server

What firewall is the laptop in question using? Is it the Windows one or a 3rd party one?

Read other 19 answers

My internet browsing has slowed to a crawl and I cannot access web meetings and other sites I have subscribed to. I did some system testing and everything came back normal except for the following: VIA Compatible Fast Ethernet Adapter: failed DHCP Server = failed pinging w/32 bytes of data request timed out (this is repeated 4 times) ping statistics for packets: send=4 received=o How can I fix this failure? Is this DHCP server from the browser; from my internet provider? Who issues this protocol number and can I change it, do I need to change it? When my computer is running the way it should it is fast and the problem with it acting so slow was intermittent for a while, now it is constant.
I use windows XP

A:DHCP Server = __.___.__.__ failed

Read other 11 answers

Hello everyone!

I'm new to this site and I've searched for a topic related to my problem, but couldn't find anything.

I had Norton Internet Security 2005 installed on my computer, but when I added a new hardware item to it, I had to uninstall NIS and re-install it because it wouldn't work. After rebooting, I couldn't establish an intranet connection that did work on the comp before. I managed to find out that there is no default gateway on the LAN, because "no DHCP server was found". To be honest, I don't even know what this exactly means, but anyway. Here's what I tried so far, and didn't work:

1. Restore the default winsock settings, with the netsh winsock reset catalog command and with downloaded winsockfix programs too.

2. Try to renew the IP-address by right-clicking on the LAN settings.

3. Reset TCP/IP stack to installation defaults, with the netsh int ip reset reset.log command.

I've got Windows XP Sp2 and a D-Link DSL-360T modem/router, with ethernet.

I would appreciate any help, but please write it in an "advice for dummies" way, I'm quite a newbie with technical issues. Thanks in advance for your help!


A:Help! No DHCP server found!

Read other 16 answers

We have a Local Area Network at work and on this network we have a VM Server with Windows 2003 Server R2 that we plan on using for Active Directory and this server also has DHCP and DNS Server configured on it. is the Server IP. NAT is not configured on the server but is configured on the router.
From this Network I have my own private address range
which connects to my NAT Router. I am able to get an ip address of from the DHCP Server for my XP Client

interface vlan10
ip address
ip nat outside
no shutdown

Next I setup a second interface on my NAT Router.
Interface Vlan 300
ip address
ip nat inside
ip helper address
no shutdown

I set up the range on the same DHCP Server
When I connect my Windows XP Client to Interface Vlan 300 I am unable to get a DHCP address on this client but on the server it says that it received an ip address.
DHCP Server address
ip address

DHCP Server Setup
Vlan 300
ip range -
DHCP Options:
003 Router
006 DNS Server
015 DNS Domain Name SQA.com
046 WINS/NBT Node Type 0x8

Any Ideas on how to fix this so I can get a DHCP address on Interface Vlan 300 I am assuming it is a configuration issue.

A:DHCP Server behind a NAT Router

it's actually a routing issue; if you can add proper routing from the router to the server,
it will all work.

HOWEVER, it would be far easier to just place all systems in the same subnet.

Read other 5 answers

I Have a new dell machine which is set to automatically detect the dhcp server (ip address) but it does not detect the dhcp server and sets its self a private ip address. I have tried ipconfig from the cmd and it will not release when i do this and reboot the ip is set and then pics upthe private address. the renew command returns the message unable to connect-time out error, is the a hardware problem or program problem.

A:Dhcp server not detected

Read other 11 answers

I use a Verizon USB broadband modem attached to my Vista Home Premium desktop using ICS thru a wireless network for internet access and a home network. The desktop is linked to the wireless by CAT5 cable to a regular port on the router. We can then connect my wife's XP and my Linux laptops wirelessly. The router has DHCP disabled and all networked machines get their ip thru ICS from the desktop. This has worked well for 2 years. Suddenly I get limited connectivity from my NIC and a private ip (169.xxx.xx.xx). I looked at the services and found the DHCP server had been stopped. When I tried to restart it as a network service I got an error stating "the account specified for this service is different from other services running in the same process." If I change the logon to Local Service I can restart the service but it still will not give the NIC a valid ip. I have tried to use the diagnose repair option from network and sharing center but it fails as well. Anyone have a suggestion on how to fix this?

A:ICS and DHCP server not working

May or may not work but a winsock reset can be helpful in these sort of issues.

1)Click on the Start Button
2)Type "cmd" in the start search area
3)At the top of the menu you see cmd icon, right click it and left click "run as administrator".
4)DOS window, in this window type this minus the quotes " netsh winsock reset "
5)Hit enter key on your keyboard.
6)Restart the computer.
Give this a shot and see if it helps.

Read other 4 answers

Is it better to have my win2k server distribute IP's, or my my router? Is there a difference? Are there any benefits or drawbacks from doing it one way or the other? What would happen if both are set for DHCP? Thanks

A:DHCP: server or router?

Read other 9 answers

Hello all,
I just finished building my computer, specs below, and im having a problem getting the internet to work. When ever i release and renew my ip it says dhcp server unavailable, i tryed reinstalling the nic driver , removing and adding my tcp\ip protocol,tryed a different nic to but i get the same problem so im just not sure what else to try
O and im running 98se

Thanks for your help


A:dhcp server unavailable?

Read other 8 answers

Hi Geeks!
I want to backup my DHCP server. I want to make sure that if my DHCP server goes down for some reason there is a server at standby that can come and takeover as a DHCP server and start leasing the addresses.
Or if i can add an additional DHCP server.
My Current DHCP Server is Windows 2000 Professional.
Is there any way that i can create a DHCP backup server as in case of Active Directory...

Kindly let me know if anyone has any sort of solution

A:Backup DHCP Server

Read other 6 answers

I have reviewed the posts on DHCP but have had no luck in resolving my problem.
I have An NT 4 server as PDC running DHCP (The service is running)
2 NIC's in the server with static IP's and
Scope with a rang >
Sub net
Reserved >
I did not config any other options
No Routers, WINS or DNS Just trying to get DHCP working first

Static IP on WIN98 clients work but when I select DHCP the client receives the "No Domain server found...and I get the windows 169.xxx.xxx.xxx default address.

As a test I have an ISDN box that acts as a DHCP when I hook it up to the network the clients do receive an IP from it. This box will not be on the network so I need to get DHCP running on the server.

Looking through the other posts, I can not find any problems with the setup or config.

A:{Resolved} - DHCP server

Read other 16 answers

Our DHCP server has a scope of x.x.x.50 to x.x.x.150 with a few reservations added, but the reservations all fall outside that scope. It's using a /16 subnet mask so the reserved IP's on on the same subnet. The DHCP server is the one you get with Win2k3 server standard edition.

QUESTION: Are the reservations actually doing anything ?

I'm sure the answer is an obvious "NO" but I just want to hear someone else say it.

troublegum -

A:MS DHCP Server on Win2k3

Read other 11 answers

Modem goes to wireless g broadband router wrt54g. Then from there cable goes to desktop. I'm currently on a laptop connected to the wireless router. I've tried connecting directly from modem on the desktop and still no connection. Tried winsock and lsp fix, installing new driver, even disabled mcafee.Also tried new cable.Tried releasing and renewing. New driver or uninstalling network card did not work. Any other ideas?

A:Can't connect to DHCP server

Hold the windows key and then press "r". Type "cmd" enter, then type "ipconfig /all". what does that say?

Read other 4 answers

Is it okay or dangerous to trust my wireless router?

A:Is it okay to trust the DHCP Server?

The IP address is the default for certain home broadband routers, principally various D-Link and Netgear models. This address is set by the manufacturer at the factory, but you can change it at any time using the network router's administrative console.http://compnetworking.about.com/od/routers...168_0_1_def.htmBut also see http://www.bleepingcomputer.com/forums/top...tml#entry999836

Read other 2 answers

In the DHCP Options: Scope, Active Options area I selected & added 003 Router, 006 DNS Server, 044 WINS/NBT Servers, & then a window opeded saying that I needed to add 046 WINS/NBT Node Type & to select 0x1=B node, 0x2=P node, 0x4=M node, 0x8=H node. Online help doesn't give any help with which to choose? Does anyone have an idea & what is the diference? Thanks for any help

A:{Advice Given} - NT4 Server DHCP

Read other 7 answers

Windows 7 Home Premium x64 SP1
Computer: Sony Vaio VPSCB11FX
Router: Apple Airport Extreme
Windows Security Essentials
Windows Firewall Disabled during tests.

Getting FAILED no repsonse DHCP server on IntelPRO wireless test. Tried ipconfig release+renew. Tried using Latency Optimizer and connectivity fixer PRO. Tried turning everything off, then turn on Modem-Router-one and one computer. Nothing works. Other wireless connections in the house work fine. Driver is up to date.
Connected directly to router with ethernet cable also works fine.


Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Luftwaffle>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Luftwaffle-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : getinternet.no

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : getinternet.no
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : F0-BF-97-5D-97-96
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix... Read more

A:No Response DHCP Server

Read other 6 answers

I just got Cox cable and it hasn't been working right.

I have a netgear WG602 wireless access point. I can connect to it but it has limited or no connectivity. Repairing the connection doesn't work and doesn't give me an IP.

I connected the ethernet cable directly to my laptop and it didn't work at all. I called them and it worked by directly connecting, but the wireless still didn't work.

Then I messed with wireless settings to try to connect, and I finally got online but my ip is 70.x.x.x, the apparent IP for all Cox subscribers.

But I got that 70.x.x.x through my router instead of a 192.x.x.x so I have no idea why it's doing that. It's really weird and I still can't get a dynamic IP.

Thanks for the help.

A:Can't connect to DHCP server

Read other 8 answers

I have an XP PC and a 2000 Pro PC connected to a Speedstream DSL Router that pushes out IP's and I am on the internet on both PC's.
I also have a 2000 Domain Controller server that is pushing out IP's.
I would like to connect them all together and use the server for DHCP. How do I stop DHCP on the router and have the PC's on the network get the IP from the server. I have tried to turn off DHCP on the router, but then I can't connect to the internet.


A:DSL Router/Server/DHCP

Read other 15 answers

I have a vista home premium laptop I have been trying to connect to the internet using wifi. I have an xp desktop that connects quickly. My laptop says there is no response to the dhcp server. Can you help me fix this?

A:DHCP server no responce

Hi -

Let's see what your system can tell us about the wifi situation. Please download the EXE file - save to Documents. RIGHT-click on EXE file, select "Run as Administrator"


2 Notepads will open one behind the other. Save both as text files. Attach to your next post.

Also, try booting into SAFEMODE w/ Networking and try Internet connection there.

Do you have Internet Security suite installed - w/ 3rd party firewall?

Regards. . .



Read other 1 answers

Im having a issue specifically with a vm server, i can get the dhcp request from router and a ipconfig looks nice and clean , but i still cant access the internet, any ideas regarding virtual severs and dhcp?

Read other answers

Modem goes to wireless g broadband router wrt54g. Then from there cable goes to desktop.(desktop is xp) I'm currently on a laptop(vista) connected to the wireless router. I've tried connecting directly from modem on the desktop and still no connection. Tried winsock and lsp fix, installing new driver, even disabled mcafee.Also tried new cable.Tried releasing and renewing. Tried static ip. New driver or uninstalling network card did not work. Any other ideas?
Host name:******
Primary Dns Suffix:
Node Type:Unknown
IP Routing Enabled:No
WINS Proxy Enabled:No
Ethernet adapter Local area connection 2:
Connection-specific DNS Suffix:
Description: Intel(r) PRO/1000 PL Network Connection
Physical Address:00-12....
DHCP enabled:yes
Autoconfiguration enabled :yes
I.P. Address:
Subnet Mask:
Default Gateway:
DHCP Server:

A:Can't connect to DHCP server

Read other 6 answers

I'm looking for a DHCP server similar to that installed on routers, to run on my computer. I need to manage and assign ip addresses automatically to my home network

A:Solved: DHCP Server

Read other 16 answers

I have win2003 server and my dhcp server quit giving IP's when a lease runs out. I have tried to reboot the serever and I have tried to start and stop the DHCP service to no avial. Now I have had to go to all the machines in our office and give them static IP's. Does anybody know how to fix this?


A:DHCP server not working

Any error messages in Event Viewer on the Server or Clients.

Read other 2 answers

the DHCP server is probably the correct way that i have to approach the previous networking ip address dorm question. It is perplexing, in that other students also have gotten the same type of ip address conflict. I take it that that would more than likely indicate that DHCP is in effect. What to do from here? Kindly advise further

Again, THANKSi

A:DHCP server follow up

Please respond to your original post - do not start another as it gets confusing. I'm going to reply to your original. Do not reply to this post.


Read other 1 answers