Over 1 million tech questions and answers.

Bad value for Linux applicaiton monitoring metric in IMC

Q: Bad value for Linux applicaiton monitoring metric in IMC

I got an iMC alert: Trap of Source: rt0012g.sdd.hp.com(15.80.33.131)Location: "San Diego R&D"Contact: [email protected] Name: Level-2 Threshold Alarm of Application ManagementSeverity: CriticalTrap Time: 2016-11-30 13:17:00Description: Application monitor (Linux_15.80.33.131) File System(/home/impts)File System Usage Ratio is in level-2 threshold range: 95.0%, and current value is 402.87%; application type is (Linux). What did value 402.87% mean? Why it was over 100%? Thanks,

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Bad value for Linux applicaiton monitoring metric in IMC

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 151.2

I got an iMC alert: Trap of Source: rt0012g.sdd.hp.com(15.80.33.131)Location: "San Diego R&D"Contact: [email protected] Name: Level-2 Threshold Alarm of Application ManagementSeverity: CriticalTrap Time: 2016-11-30 13:17:00Description: Application monitor (Linux_15.80.33.131) File System(/home/impts)File System Usage Ratio is in level-2 threshold range: 95.0%, and current value is 402.87%; application type is (Linux). What did value 402.87% mean? Why it was over 100%? Thanks,

Read other answers
RELEVANCY SCORE 63.6

Hi all,

I have 2 adapter, same model same speed. When I use "route print" command to check the table, they are the same metric.

I need to use the designated adapter to connect a server. How can I make sure this adapter is higher priority in the route table. 
Remark: This PC is not allow to set the route table. I have to use the automatic metric algorithm.

Read other answers
RELEVANCY SCORE 57.2

I need your help to source some free or VERY cheap solution for the health monitoring of Linux and VM systems and also – inclusive of, hopefully, Oracle databases, etc.

A:Health Monitoring Linux VMs & Oracle DB

Could you describe a little bit more what you expect from "health"?  Specific processes running, SMART drive status, database integrity?

Read other answers
RELEVANCY SCORE 50.4

I know others have had this problem but I am not able to remove this myself.

I am using a Dell Inspiron 9400 laptop with XP

The error is:
services.exe - Application Error
The Instruction at "0x0032595a" referenced memory at "0x00000000". The Memory Could not be "read".
Click OK to terminate the program
Click on Cancel to debug the program

When I click either one I get a notice that the system will shut down in one minute which it does.

I have run every Malwarebytes, Ad Aware, Avira and SuperAntiSpyware, Spybot Search and Destroy.

I followed the instructions on this site but could not download the ATF Cleaner as that link did not work.

I am attaching logs for the Malwarebytes and SuperAntiSpyware.

Thanks for your help.

Malwarebytes Log

08:25:24 Bart DeLio MESSAGE Protection started successfully
08:27:37 Bart DeLio MESSAGE IP Protection started successfully
08:39:58 Bart DeLio IP-BLOCK 141.136.16.151 (Type: outgoing)
08:40:01 Bart DeLio IP-BLOCK 141.136.16.151 (Type: outgoing)
08:40:07 Bart DeLio IP-BLOCK 141.136.16.151 (Type: outgoing)
08:40:11 Bart DeLio IP-BLOCK 206.161.121.4 (Type: outgoing)
08:40:14 Bart DeLio IP-BLOCK 206.161.121.4 (Type: outgoing)
08:40:20 Bart DeLio IP-BLOCK 206.161.121.4 (Type: outgoing)
08:40:31 Bart DeLio IP-BLOCK 206.161.121.2 (Type: outgoing)
08:40:31 Bart DeLio IP-BLOCK 206.161.121.3 (Type: outgoing)
08:40:34 Bart DeLio IP-BLOCK 206.161.121.2 (Type: outgoing)
08:40:37 Bart DeLio IP-BLOCK 206.161.121.3 (Ty... Read more

A:Services.exe - Applicaiton Error

Hi -Please read this output from M/soft -Re: referenced memory at "0x00000000". The Memory Could not be "read".Microsoft has confirmed that this is a bug in the Microsoft products that are listed in the "Applies to" section. This bug was corrected in the latest service pack for Visual Studio 6.0. For more information about Visual Studio service packs, click the following article numbers to view the articles in the Microsoft Knowledge Base:194022 (http://support.microsoft.com/kb/194022/ ) INFO: Visual Studio 6.0 Service packs, What, Where, Why194295 (http://support.microsoft.com/kb/194295/ ) HOWTO: Tell That a Visual Studio service Pack Is InstalledTo download the latest Visual Studio service pack, visit the following Microsoft Web site:http://msdn2.microsoft.com/en-us/vstudio/Aa718353.aspxThank You -

Read other 2 answers
RELEVANCY SCORE 50.4

getting wmp54gsv1_1.exe application error at shutdown

A:Wmp54gsv1_1.exe Applicaiton Error

Hello and welcome to BC. This is a Linksys wirelss router issue. Read this please. Fom the last BC post herehttp://www.bleepingcomputer.com/forums/lof...php/t65379.htmlThanks to the member sonnytwins, here is a solution for the 'WMP54GSv1_1.exe' error that TiffanyH was experiencing:"I used to get the same error popup as TiffanyH, until I got the fix (from Linksys customer support chat session), here are the details and the fix:router: WRT54GS Linksys wireless router with Speedboosternetwork card: WMP54GSOS: Windows XP homethe problem: each time the PC shuts down, get multiple annoying error popups relating to wmp54gsv1_1.exe. Sometimes happens at startup too. The router connection stills works fine though, it's just an inconvenience I guess.- uninstall the network card- reboot- when it comes back up, it'll bring up a "found new hardware" popup- choose the "automatic" option- insert the CD that came with the network card, then wait a few seconds- voila!The idea is to use the Windows utility for the network card, not the Linksys one. This worked right away for me, no more annoying error popups upon shutdown, and the internet connection is as good as it ever was.BTW, this response had nothing to do with the virus/spyware issue that originated the thread, it's only about the error popup wmp54gsv1_1.exe (which appears in the last couple of paragraphs in the thread).Good luck everyone!"Thanks for the tip sonnytwins.

Read other 1 answers
RELEVANCY SCORE 46

hi all. I am getting several errors with bood performance and shutdown performance monitoring issues. I was wondering if anyone knows what the errors are and how to fix them.

they are errors:
100
200
203
102
108
101
106
501
500
110
107
103
351
350
304
305
302
They are in order from most recent to not so recent. They are all warnings(most of these are warnings), errors, and i think 2 criticals. the bottom of the list started the 15th. the top is today-the 29th. i have updated everything i can think of, and i really think these may help lead me to some boot up problems i have been having.
Btw- did a clean install of win7 64x the 15th. VERY FEW programs installed. ALL updates current. no games. just basic stuff like adobe etc.
Any help would be much appreciated!
Thanks in advance.

A:boot performanc monitoring and shutdown performance monitoring issues

  
Quote: Originally Posted by allen1979


hi all. I am getting several errors with bood performance and shutdown performance monitoring issues. I was wondering if anyone knows what the errors are and how to fix them.

they are errors:
100
200
203
102
108
101
106
501
500
110
107
103
351
350
304
305
302
They are in order from most recent to not so recent. They are all warnings(most of these are warnings), errors, and i think 2 criticals. the bottom of the list started the 15th. the top is today-the 29th. i have updated everything i can think of, and i really think these may help lead me to some boot up problems i have been having.
Btw- did a clean install of win7 64x the 15th. VERY FEW programs installed. ALL updates current. no games. just basic stuff like adobe etc.
Any help would be much appreciated!
Thanks in advance.


Is your boot up slow? Don't pay attention to these unless you notice that your computer isn't performing well or is crashing etc.

Read other 2 answers
RELEVANCY SCORE 44.8

Hello,

Lately, I've noticed all of my applications (Word, Photoshop, etc.) use the metric system of measurement. I'm not sure why this started, but I'd like it to go back to the imperial system. Do you know how I can change this default setting? Thanks!

Chris

A:Metric system!

I don't know about Photoshop, but in Word you can go to

Tools -> Options -> General tab and check that the measurement units are in inches

Entering "measurement" in Windows Help gained this information:

To change the way your computer displays numbers
Open Regional and Language Options in Control Panel.
On the Regional Options tab, under Standards and formats, click Customize.
On the Numbers tab, specify any changes you want to make.
Among items you can change are the decimal symbol and list separator, the format used for negative numbers and leading zeros, and the measurement system (U.S. or metric).

Note

To open Regional and Language Options, click Start, click Control Panel, and then double-click Regional and Language Options.

Read other 2 answers
RELEVANCY SCORE 44.4

Hi,

I'm looking for an solution for an random issue on my clients computers (Windows 7 or 10).
They connected to an business vpn with Juniper network connect.
As usual, to be sure the computer use the vpn network to make dns reolution etc... the virtual network card created by juniper is using metric 1 to have the top priority.
That's working well since 1 or 2 years.
For an unknown reason When they connect to the vpn some computers keep the internet gateway instead of using the one provided by juniper vpn...
The solution we've found is to edit the juniper metric from 1 to 2 and after ipconfig /flushdns the route table is using the vpn gateway..the pb is, juniper create an virtual card each connections, so it is deleted when the users disconnect his vpn session.
I don't know why but the computers seems not update the route table when connecting to vpn..
We tried :
 - changing from ethernet to wireless or 3G/4G internet source
 - change the network card order in advanced parameters from the networking center..
 - route -f is not workingg

Do you have any idea..?
regards

Read other answers
RELEVANCY SCORE 44.4

Hi:
I've started a virtual machine which has two nics with qemu-kvm on server 192.168.6.2, one nic with qemu-kvm param "-redir tcp:40037::3389" is in "user" mode which IP is 10.0.2.15, so if I connect to 192.168.6.2:40037, it will map to
10.0.2.15:3389, the other is in bridge mode which IP is 192.168.6.100, my pc is 192.168.6.220, In the vm, "route print" shows two default gateway as below:
0.0.0.0          0.0.0.0      192.168.6.1    192.168.6.100    5
0.0.0.0          0.0.0.0      10.0.2.2          10.2.2.15    5
When I use my pc connect to 192.168.6.2:40037, always cat not connect, so I change the metric value to 100 of 10.0.2.2, it works well.I am confusing. My question is:
I capture packet on nic 10.0.2.15, when connect, the src IP  is 192.168.6.220, src mac is the mac of 10.0.2.2, all these are right, but when reply, why it still select default gateway of 10.0.2.2? I mean the dst is 192.168.6.220 and there is a route
item like:
192.168.6.0    255.255.255.0            on-link     192.168.6.100    261
why doesn't it choose this one?
Or it doesn't find routing table at all when reply, just according to the receive interface? But if really this, why doesn't it work when metric value are the same? 
Or it doesn't find rou... Read more

Read other answers
RELEVANCY SCORE 44.4

Hello!
Got a problem with Vlan's, I have created 2 different Vlan on Realtek or intel network card.
Work ok, virtual cards getting the correct IP address, but Windows 8 using DNS server from virtual network card  who has the lowers metric.
PC show takes DNS server setting from Vlan200 with metric 5 but instead, he using the DNS server from Vlan37 with metric 22.
Maybe someone know how can I fix this issue?
On Windows 10 don't have this problem.

Read other answers
RELEVANCY SCORE 44

I have had windows 7 for a few weeks and every time the PC is rebooted the Metric for both the Lan (172.17) and Wifi(192.169)goes back to 20, the Lan is set to Automatic and the wifi is set to 10, has anybody seen this problem before?

Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 172.17.96.4 172.17.99.156 20
0.0.0.0 0.0.0.0 192.169.1.1 192.169.1.14 20

Regards

A:problem with windows 7 not using correct metric

Sounds quite bizzare, Windows assigns a lower metric to the gateway it can communicate the fastest with, but in this case both have been assigned 20.
If you've manually assigned a gateway and metric you should see that in the list of persistent routes.

I wonder if your issue is similar to that in http://www.sevenforums.com/network-sharing/47280-how-configure-multiple-gateways.html

I'm stumped and have emailed MS as it works as expected in Win XP

Read other 5 answers
RELEVANCY SCORE 44

I looked forward to opening 'publisher' for the first time to see if I could produce an item to fit into a magazine/newspaper. I made my initial box-size and then discovered that IT'S ALL IN IMPERIAL! Considering that most of the people in the world use Metric and don't mess up our engineering and space stations by making stuff in imperial, why would Microsoft imagine that imperial works here. We went Metric in '71... Put it in Metric and let the yanks find the box marked 'Imperial'...
Anyhoo, I'm looking for the box to tick to choose to have the scales in Metric please, as I can't find it simply. Please may someone tell me...?

A:Changing scales to metric? (Publisher, PPT, etc...)

The horizontal and vertical rulers in Microsoft Publisher 2007 can be changed to display a different type of measurement unit. By default, the rulers in Publisher display inches, but you can change them to a variety of other measurement units.
For microsoft Publisher 2007.

Instructions

1 Once you're in your document, choose the "Tools" menu, and click "Options" to open the "Options" dialog box.2 Select the "General" tab at the top of the "Options" dialog box, if necessary, to display the basic settings for Microsoft Publisher.3 Click the arrow to display the "Measurement units" drop-down list from the "Options" dialog box. These are the different types of measurements you can display on the Publisher rulers. Choose the measurement you want from choices that include inches, centimeters, picas, points or pixels.4 Click the "OK" button to close the "Options" dialog box and return to your Publisher document. Your rulers will display with the measurement you picked. Use the same process to switch back to the original measurement or to choose a new unit of measurement.

Read other 2 answers
RELEVANCY SCORE 44

I changed my OS to Windows 8.1 64bit. my fingerprint scanning software(simple pass identity) not working and my webcam also not working. i have downloaded and installed drivers&softwares from http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-m6-Notebook-PC-series/5296045/model/5305648 ,but still its not working. Regards

Read other answers
RELEVANCY SCORE 44

Hey guys,
I am using a 3G modem (Virgin Mobile MC760). In short; I have 2 connections; 1 is wired ethernet and the other is this 3G modem. I want to be able to use the 3G modem in a guest Vmware system while still using my regular ethernet for everything else in the host. (Unfortunately this modem doesn't work in VM so I am stuck having 2 internet connections in Win7 and trying to route this).

I have read up on metric values but heres the problem. I set the ethernet for a metric value of 1 and the 3g connection as 9999, ethernet alone works fine, as soon as I connect the 3g modem it takes priority and changes my metric value of the ethernet higher and creates a 0.0.0.0 default gateway, when my ethernet is 192.168.1.1. The only way around this is if I disconnect my ethernet and reconnect it, it will then take priority and have both be connected and use ethernet.

Is there any solution to this?

A:Using 3G Modem, it changes metric value and default gateway, help?

  
Quote: Originally Posted by petya124


Hey guys,
I am using a 3G modem (Virgin Mobile MC760). In short; I have 2 connections; 1 is wired ethernet and the other is this 3G modem. I want to be able to use the 3G modem in a guest Vmware system while still using my regular ethernet for everything else in the host. (Unfortunately this modem doesn't work in VM so I am stuck having 2 internet connections in Win7 and trying to route this).

I have read up on metric values but heres the problem. I set the ethernet for a metric value of 1 and the 3g connection as 9999, ethernet alone works fine, as soon as I connect the 3g modem it takes priority and changes my metric value of the ethernet higher and creates a 0.0.0.0 default gateway, when my ethernet is 192.168.1.1. The only way around this is if I disconnect my ethernet and reconnect it, it will then take priority and have both be connected and use ethernet.

Is there any solution to this?


Dont think so. I have a virgin 3g modem and the coding is built into the firmware in the dongle.

Read other 4 answers
RELEVANCY SCORE 43.6

Does anyone have a part number or know where the following can be ordered from:M3 metric guide screws for 5.25-inch drives These are a special screw used in the HP EliteDesk tower drives, but are not included. 

Read other answers
RELEVANCY SCORE 43.6

Hi,
I have both Windows XP and Office XP. Currently, I'm working on a Word document in which I need to set the margins all around to 1.5". My software, however, is only giving me measurements in cm.
I tried, following some advice, to go into my computer's control panel to regional settings, and then to the numbers tab. Unfortunately, my computer has no numbers tab. It only had a general, languages and advanced tab.

Any help would be appreciated.
Thank you.
 

A:converting from metric to us imperial measurement system

Is there a customize button. Under that, there should be measurement system setting.
 

Read other 3 answers
RELEVANCY SCORE 43.6

I need to mount a 500 GB 2.5" hard drive in a HP Prodesk 600 G1 SFF and I do not have any additional M3 metric isolation mounting guide screws.  The service manual states that these can be ordered fro HP.  Does anyone know where on HP's site these can be found?

A:M3 metric isolation mounting guide screws

@D_Andrzej 
?Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).If you are unfamiliar with the Forum's private messaging please click here to learn more.Thank you,Omar

Read other 3 answers
RELEVANCY SCORE 43.2

The company I work for has recently gotten a new Internet connection at their farm across the street. Originally the time clock was placed there and monitored over the LAN on the computer that I am at right now. Now that there is a new connection I need to know how to connect the time clock on the other internet connection to this PC. Networking has never been my strong suit. any help would be appreciated!

-Bumbers

P.S. The time Clock is an anviz EP300 and the PC is running windows 8.1
 

A:Solved: Connect Bio-metric time clock to another network?

Hi Bumbers, and welcome to TSG.

Does the new connection at the other building have at least one static public IP address? If not, things may get a bit more complicated.

Beyond that, you will need to set up whatever modems and routers are being used across the street to port forward from the Internet public IP address to the private IP address of the time clock on the LAN. Having the time clock use a static IP address on the LAN, rather than get its IP address via DHCP would also simplify things.

It appeared to me that only registered users on the Anviz web site can download product manuals. I have no idea if or how the time clock can be properly configured to use a static IP address, the port numbers used, or the type of security it offers. Once you have port forwarding configured, the time clock will be exposed to attacks from the Internet.

After you have everything configured at the other location, you should be able to use the public IP address of the other location to access the clock from your location.
 

Read other 3 answers
RELEVANCY SCORE 43.2

How can I manage the option of convert the metric degrees in Weather app in metro screen. In Cuba when i live the wheather messure is in celcius degrees. Thank you

A:Convert the metric degrees in Weather app on metro screen

Hello Kbayin, 1st open the weather app then select settings tab from the start button in the lower left corner. On the right hand side select weather preferences then Celsius or Fahrenheit for temperature.

Read other 3 answers
RELEVANCY SCORE 43.2

When ever I go to log on to my Dell Latitude E7440 with windows 7 Professional x64 I get an error screen saying that windows could not find a bio metric device. This is true because my computer does not have a fingerprint reader on it. I was wondering if anyone could help me so i don't have to sit through my computer looking for the device and not finding it every time I go to log in. TIA

A:How to Disable Search for Bio metric Device on Windows 7 Start up?

Hi Welcome to Seven Forums .. Strange issue you seem to have ...

Reading the System Specs for your Laptop from the Link below ..

Seems some Models do have the Fingerprint Reader ...

Could it be some Software you have Installed from the Dell Website ..

That is causing this message ? ...

Dell Latitude E7440 User Review

Read other 1 answers
RELEVANCY SCORE 43.2

Hi, I'm new to this forum, and hope to solve my problem with some expert guidance.

The problems started with me trying to create a shared file in onenote, which could be edited and viewed by all users of my computer. In the UAC, it asked me about some permission about "INTERACTIVE" and "SERVICE", if I remember right. I allowed it to do so, and hoped to set up the notebook in the public documents folder.

But, since then, the libraries (Documents, music, etc) reported being "Unresponsive" when I clicked on "Includes: 2 locations".


Also, the "See more results" link in the start menu reports an error as in the picture:



I recently installed Autocad Architecture Metric (US) in my computer, and then tried opening it in Guest account, but it just shows the following:


Then:



Then it shows:



And then it disappears, and nothing happens. I'm unable to open the software even when I applied read&exec permissions for guest in the folder containing the program. Path: C:\Program Files\Autodesk\AutoCAD Architecture 2011 (The folder containing the program)... (acad.exe)

All the other apps like chrome, pdf, etc are running without any problem, as this problem arose after their installation.

Also, please tell me why this app runs in guest account only if I select "Run as administrator". Other standard accounts are fine. Thanks!

A:Can't install Autocad Architecture Metric (US) in Guest account

why dont you try using the administrator account

Read other 3 answers
RELEVANCY SCORE 43.2

Living in France you cannot avoid a French keyboard, they're everywhere. So I learned using the azerty, but stuck to English.

This is of course beyond the people designing Windows.

So how can I have Windows 8 speaking English, but using French options for the rest (?, keyboard, date format, metric)?

And of course, ALSO WITH METRO please. It seems independent of the "real" OS.

Thanks in advance

A:French Keyboard, , metric and date with English speak W8

A lot of these changes can be made through the Control Panel > Clock, Language and Region
If it affects Metro, I do not know.

Read other 1 answers
RELEVANCY SCORE 42.4

Hi!
I have a question that I can't find the answer for, I've been searching like crazy but keep finding the same responses which have in my case proven useless.
The situation is this: I have one router and one computer, the computer has two network interface cards which are both connected to the router and given IP addresses. I have made the metrics in Windows such that normal traffic SHOULD always choose NIC 1 and I have in the application "Tixati" set it manually to use NIC 2. I have then set my firewall to only allow the application "Tixati" to use NIC 2 while blocking it from using NIC 1. So in theory everything on my computer should use NIC 1 except "Tixati" which should use NIC 2.
The problem: The issue is that for some reason Windows will sometimes think it's a good idea to just straight up switch over to using NIC 2 for ALL traffic, even though it has a waaaay higher metric (static permanent routes) and the firewall is blocking access for the applications on that interface, which results in the applications being straight up blocked. This is temporarily solved by disabling and enabling NIC 1... Until it happens again.
The cause: I just straight up don't know, I do however think it has something to do with Windows probably trying to use a different NIC at the slightest hint of an issue with the main NIC, it often happens during web browsing and I even found one specific website that seemingly caused this issue every time I reloaded... Read more

Read other answers
RELEVANCY SCORE 42.4

I have been to the section of Win7 personalization where metrics are stored for text display.

If you look at the window options section for borders and such, and select a metric in ("Change Windows colors and metrics" will get you there in the search box) -- everything seems to be in there except the area called window text. Window text is in the illustrated screen area. I can make a screen shot if necessary.

Going to the selections that default at an item called Desktop then right click to open, Window text is not there. An Item called Window (single word) is.

The goal is to have my files and folders show larger in -- Explorer I guess-- and in the network file folders I have in an old style workgroup set up for the home.

I have tried all of the options at the metrics screen but have failed to get a simple folders and files list to display in a larger font.

Read other answers
RELEVANCY SCORE 39.2

Goal: Dual boot Windows 7 and Linux and have an NTFS partition for both OS.

Problem: When creating Logical Partitions with any Linux partition tool(Gparted, cfdisk) the Linux swap and ext 4 partitions shows up on Windows 7 as primary partitions outside of the Extended partition while the NTFS partition shows up inside the Extended partition as logical drive. Disk management shows 5 primary partitions and 1 logical drive inside an extended partition.(As seen in Disk1.jpg attachment) I'm using MBR.(not UEFI)

I can create the partitions in Windows 7 disk management and choose not to format the two logical partitions used for Linux. I can then use the mkswap and mkfs.ext4 command to format the partitions.(See Disk2.jpg attachment)

Questions:
Why is Windows 7 disk management not showing my partitions correctly when I use a Linux tool to partition the disk? Will this cause any problems with Windows 7? I'm afraid of making Windows 7 unbootable.(although it booted just fine I do plan on using EasyBCD to add an entry to load the grub bootloader for Linux)

If I partition my disk with Windows 7 disk management(as seen in Disk2.jpg) will that cause any problems for Linux?

What is the recommended way to handle this? What are the downsides to each way?

Note: I'm a bit of a linux noob.

Read other answers
RELEVANCY SCORE 39.2

Hello.

Devices powered by Linux are increasing day by day, and most of these devices are positioned at the entry or key points of any organization?s network. Misconfigurations and easy to exploit vulnerabilities are commonly leveraged by bad actors. Many of these attacks can be studied by configuring low-interactive Honeypots.

Low-interactive Honeypots can capture the malware scripts and binaries, however analyzing these malware samples are also important. Further, keeping such analysis openly available helps independent researchers to search information of their interest and make useful conclusions.

Detux aims at automating the analysis of Linux samples, by supporting multiple CPU architectures (ARM, MIPS, MIPSEL, x86 and x86-64), and making its result openly available for researchers.

detux - The Linux Sandbox


 

Read other answers
RELEVANCY SCORE 39.2

OK,
My config is HP G6 1075 SA with W7 Home Premium 64 bit pre-installed. It was working well until last week when I decided to install Debian Linux. I am no N00B to Linux and have installed it probably 100s of times. Debian installed and booted well but Windows BSODed with an error 0x0000225 cannot access drive. I formatted C and attempted to reinstall Windows 7 but it is unable to detect the HDD. I accept terms of license and move on to the point of choosing disks but nothing shows up. (There is an option to choose drivers. Where do I locate them? The HP website isn't helpful and I can't even find my product let aside the drivers)

I have already tried :
1. Partitioning an NTFS file system in Debian. Doesnt show.
2. Deleting a partition in Debian and attempt to see the free space in W7 Installer. Didn't work.
3. Try to do the BIOS setting thing (Change SATA option from AHCI to compatible or something). I could find no such setting in BIOS. The BIOS was severely limited with only option of switching on fan.

What do I do ?
The chipset is Intel HM55 if that helps and harddrive is SATA 5400 rpm 500GB.

A:W7 installer doesn't detect SATA after Linux, Linux works smoothly

All Linux code must be deleted using the CLEAN ALL command.As you have had linux on the HD you need do a Clean all & full format.

Do a full clean & full format in command prompt.
1) Boot DVD & Press Shift+F10 (for command prompt)
DISKPART : At PC Startup
2) Boot DVD, & Command Prompt at Startup
(for command prompt)

Type in command line
DISKPART
LIST DISK
SELECT DISK # (win HD)
CLEAN ALL
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT fs=NTFS
ASSIGN
EXIT
EXIT





SSD / HDD : Optimize for Windows Reinstallation

Read other 5 answers
RELEVANCY SCORE 39.2

I am experienced Windows user, but I don't like W10 spying on me and I want to start learning and slowly transition to linux distro with a reliable option to run windows programs I am familiar with in secure controlled environment. Memory, storage space and processing power is not a problem. Thank you for any recommendations

Read other answers
RELEVANCY SCORE 38.8

Scientific Linux 6.7 Officially Released, Based on Red Hat Enterprise Linux 6.7
Based on the freely distributed source code of the recently announced Red Hat Enterprise Linux (RHEL) 6.7 operating system from Red Hat Inc., Scientific Linux 6.7 is here to update its base to the upstream OS, add some tweaks, update many of its core components, and address some of the most annoying bugs.

Prominent features of Scientific Linux 6.7 include the addition of the IceWM window manager, updated the OpenAFS package to version 1.6.14, updated the epel-release package to version 6.8, built the glusterfs-server package from the TUV sources provided for the GlusterFS client.
 

Read other answers
RELEVANCY SCORE 38.4

Hi there

I usually run a LINUX HOST for testing Windows VM's - but I need to test some new releases of various Linux distros so I've created some VM's --easy enough and running them on a Windows Host.

However I can't attach a USB drive with a Linux file system (XFS) to the VM as the Windows HOST rejects the HDD wanting me to format it !!. There's 2.7 TB of media files on it - I want to test running media server in a VM.

Anybody know how to bypass the Windows nag prompt about the HDD and be able to attach it direct to the VM.

(The other way round is no problem -- never a problem loading NTFS HDD's on to Linux machines -- however the NTFS file system is SLOW compared with XFS -- on USB3 device on Native windows transfer rate of 1 TB of files from fast NTFS HDD to NTFS USB3 device is max 82 Mib/s - average for whole transfer. On same machine with Native Linux and XFS to XFS (using same HDD's and USB 3 port avg speed is 350 mib/s !! -- HUGE difference !!!).

Note I have to have a Windows Host for this --I know I could run Linux VM's from a Linux Host but in this case I do have to use a Windows Host as that will be the destination system at the end of testing.

BTW I'm running VMWARE workstation 12.1 on W10 Pro Host.

Cheers
jimbo

Read other answers
RELEVANCY SCORE 38.4

Hi all,

where to locate DHCP code, which my Linux machine(red hat linux-2.4) is using?i tried to f ind it in /usr/src/linux-2.4.20.8, but no result.
 

A:where to locate DHCP code, which my Linux machine(red hat linux-2.4) is using.

I moved you over to development, maybe someone here will be familiar with the layout of the source files.
 

Read other 2 answers
RELEVANCY SCORE 37.6

I have SUSE 9.3 Installed on a 19GB partition of a 40GB hard drive. I heard that it is possible to dual boot with Windows with Linux being the first installed OS, but it's complicated. Can anyone tell me if I can pull this off without having to make Windows the first installed OS? Here is how I have my partitions:
hda1=1GB [swap]
hda2=17.8 / [root]
 

A:Linux/Windows dualboot machine with Linux first?

The easiest way: Make hda1 bigger and install Windows there.

You will have to restore GRUB later using the SuSE CD and also create the GRUB menu entry for WIndows..
 

Read other 1 answers
RELEVANCY SCORE 37.6

Ok, I have a Toshiba PCX 2200 series and this is the modem that Road Runner uses(well one of them anyway) and also I use the USB cable not the NIC. Is linux refusing the USB and prefers NIC?
 

A:I tried on the linux boards so now I'm here, about cable modem on linux...

Most of the times yes... it depends of the distro version that you use...
In any case you're better off with a nic card ( and this applies for Micro$oft OS as well...)
 

Read other 1 answers
RELEVANCY SCORE 37.6

Any hint on booting from the USB or SD card slots into Linux Mint??  ref: Yoga 11e Chromebook 20DU 0008US. Inpossible to use this for any serious work.  Maybe Mint is the cure?

Read other answers
RELEVANCY SCORE 36.4

Hello i have a couple of questions i want to try a different os for my windows 7 computer but im pretty confused on which one too use. theres this one ubuntu Ubuntu online tour and then linux New features in Linux Mint 13 - Linux Mint which one should i try out and is it user friendly? and how many other os are there for windows 7 im pretty confused... and before i download it should i backup my pc before i install it. any input would be helpful. thanks

A:want to try unbuntu and linux or linux mint

Linux mint is comparatively easier to use, as it's GUI is similar to Windows. On the other hand, Ubuntu or Fedora look a bit different, but the functions are basically the same.

It will be a good idea to take a backup before installation.

Read other 9 answers
RELEVANCY SCORE 36.4

Hi,

I need to read windows files on linux for Red Hat Linux 9.x.
Can some one tell me the way, how this can be done or some setting which enable to read files from windows on linux.


regards
ratan
 

A:windows files on linux for Red Hat Linux

If you need to read an NTFS mounted drive in that machine then you'll need to add kernel support for NTFS. Try looking http://www.linux-ntfs.org/ for that info. If you just want to hit shares then just mount them via smb.
 

Read other 1 answers
RELEVANCY SCORE 36.4

I AM CLEARING AND REWORKING MY NT4 AND WAS WONDERING ABOUT A LINUX OS TO WORK ALONG WITH IT IN A PARTITION.
COULD ANYONE RECOMEND A GREAT BROTHER?
I HEARD THAT CORELS LINUX IS SUCH A PLAYER WITH NT4. ANY OTHER LINUX OS THAT MAY BE BETTER? I AM A VERY NEWBIE AT THIS POINT>

THANKS------------OKOKOPO

 

A:{Moved to Linux Forum} - NT-4 AND LINUX ?

Greetings

OK, I have never worked with Corel's Linux, but I have been told that it is a nice version to learn the Linux GUI.

Other good version's to learn on are Mandrake and Red Hat. But, if you want to get more power out of your linux installation, you need to use distributions like Slackware, or Debian.

And... I am sure that another Linux fan will have a completely different point of view. Oh well... If you want, I can move this thread to the Linux forum, and you can see what their reaction is.

My best solution for you, is to buy a "Linux for Dummies" type of book, which should come with a free CD with a Linux distribution on it. That way, you get a beginner's Guide to Linux, plus a pressed bootable CD.

What I can give you, are specific instructions to installing linux as a dual boot system with NT.

If you go to www.xperts.co.za/reuel/multiboot I have specific instructions on how to dual boot your system with NT.

Hope this helps

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/reuel/multiboot

Every morning is the dawn of a new error...
 

Read other 2 answers
RELEVANCY SCORE 36
RELEVANCY SCORE 35.2

Hi there

Linux Mint (17) QIANA now released

I Am trying this in a VM now before testing on a REAL machine. I'm looking for good things with this release --it's a LTS (Long Term support) release which will be supported until 2019.

This is the sort of things I've been looking for -- I tend to use Linux as an everyday desktop and like the idea of Long term release support -- one of the main reasons I chose OPENSUSE over a lot of other ones - but I do prefer a debian based system over an RPM based one like SUSE even though I haven't had too many complaints with it.

(I recommend you use the LEGAL torrent in their links - it's a lot faster than some of the servers until the mirrors get loaded up with the new release).

The Linux Mint Blog ? Blog Archive ? Linux Mint 17 ?Qiana? Cinnamon RC released!

Cheers
jimbo

A:Linux users - Linux Mint 17 "Qiana" releaed

Originally Posted by jimbo45


Hi there

Linux Mint (17) QIANA now released

I Am trying this in a VM now before testing on a REAL machine. I'm looking for good things with this release --it's a LTS (Long Term support) release which will be supported until 2019.

This is the sort of things I've been looking for -- I tend to use Linux as an everyday desktop and like the idea of Long term release support -- one of the main reasons I chose OPENSUSE over a lot of other ones - but I do prefer a debian based system over an RPM based one like SUSE even though I haven't had too many complaints with it.

(I recommend you use the LEGAL torrent in their links - it's a lot faster than some of the servers until the mirrors get loaded up with the new release).

The Linux Mint Blog ? Blog Archive ? Linux Mint 17 ?Qiana? Cinnamon RC released!

Cheers
jimbo



Yup... great news...Just to emphasise - Qiana is RC at the moment...

Read other 24 answers
RELEVANCY SCORE 34.4

Ars reports from the Linux Security Summit?and finds much work that needs to be done.

The Linux kernel today faces an unprecedented safety crisis. Much like when Ralph Nader famously told the American public that their cars were "unsafe at any speed" back in 1965, numerous security developers told the 2016 Linux Security Summit in Toronto that the operating system needs a total rethink to keep it fit for purpose.

No longer the niche concern of years past, Linux today underpins the server farms that run the cloud, more than a billion Android phones, and not to mention the coming tsunami of grossly insecure devices that will be hitched to the Internet of Things. Today's world runs on Linux, and the security of its kernel is a single point of failure that will affect the safety and well-being of almost every human being on the planet in one way or another.

"Cars were designed to run but not to fail," Kees Cook, head of the Linux Kernel Self Protection Project, and a Google employee working on the future of IoT security, said at the summit. "Very comfortable while you're going down the road, but as soon as you crashed, everybody died."

Continue Reading - http://arstechnica.co.uk/security/2016/09/linux-kernel-security-needs-fixing/

Share your thoughts and opinions below.
 

A:Linux kernel security needs a rethink, Linux Security Summit

Same thing that has been argued time and again about Windows OS over the years...
 

Read other 1 answers
RELEVANCY SCORE 33.6

I've been cosidering giving linux a shot, but am unsure which to try, there are so many, and all have there following.
I want it to be fairly simple to install, and I want it to ideally recognize all my hardware the 1st time.

It'll be on a 1.8ghz p4, 512mb ram, 60gb(or more) hd., intel integrated 845gl graphics, and integrated stereo sound.

I've been looking at Ubuntu, and it looks ok, but I know nothing about linux, so I may be way off track.

Any help?
 

A:What Linux to try for a Linux noob?

I've yet to get to grips with Linux but as far as installing. If you wish to pay (this will give you some hand holding, but Tech sopt can supply this) SUSE went on withotu problems. For a free one (2.6GB download) Fedora core was also trouble free for me.
Spike has installed Fedora Core 4 I believe and I think this went well for him.

In your own words Spike.
 

Read other 37 answers
RELEVANCY SCORE 32

Hi, I was wondering if there was a way to see if my work lap top was being monitored? I use it for personal use after hours and surf sometimes while at work. Nothing scandalous, but curios if there was a way to check and also clean if possible. Any reccomendations are much appreciated. Is there cleaning software available?
I am not in the office, and do not have to go through a network server or through any company-type network. Internet explorer is browser.
Thanks
 

A:lap top monitoring

So how are you connected to the Internet at work if you're not using any "company-type" network?
 

Read other 3 answers