Over 1 million tech questions and answers.

HP Omni 27-1210xt Video Location

Q: HP Omni 27-1210xt Video Location

I need to know where is the video located on this unit, is it onboard or seperate? Thanks

RELEVANCY SCORE 200
Preferred Solution: HP Omni 27-1210xt Video Location

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: HP Omni 27-1210xt Video Location

PlunksComputers wrote:I need to know where is the video located on this unit, is it onboard or seperate? ThanksThe graphics are integrated into the motherboard and not upgradeable.

Read other 4 answers
RELEVANCY SCORE 110

I got a HP Omni 27-1210xt into my shop last week and it had a bad hard drive, so i replaced the drive with the exact model and blew out the dust while i had it apart and after i put it all back together the video never displays, it did once but the unit shut off like 10 seconds after it came up, the other times you can hear the fans and the system running but just never shows a video, I have removed the memory and turned it on and it beeps so i would only say it rules out the motherboard or processor, so I'm looking for it to be video. Now I have located the processor but I do not see where the video is on this unit, doesn't appear to tbe onboard, maybe under some of the other covers? I'm about to strip it down some more. Any trouble shooting tips or ideas guys?

A:HP Omni 27-1210xt No Video

Still no comments or tips, anyone able to assist with this problem?Thanks

Read other 1 answers
RELEVANCY SCORE 55.6

I have an Omni 200 all in one. It shutsdown periodically. It seems to be when watching video, but not all video. Any suggestions? Could this be a java issue? 

A:omni 200 shutdown watching video

Tomcat1015, welcome to the forum. This is normally a symptom of over-heating.  It would be good to find a diagnostic software that has a temperature reading.  Here is a Speedfan.  As soon as it shuts down you should boot and check the temps. Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.  

Read other 2 answers
RELEVANCY SCORE 55.2

I am trying to upgrade my computer. So far I've successfully upgraded the CPU, RAM and wifi/bluetooth adapater. However, I have not been able to successfully upgrade my video card.  I've purchased two different cards and when I install them the computer powers up but the screen is black. It seems like the computer is still functioning because when I remove the card and boot using the onboard video the system has installed drivers for each of the two cards I've tried. This is my computer:http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03377747 These are the two video cards I've installed:https://www.amazon.com/HP-EliteOne-Radeon-Graphics-671864-002/dp/B00H71JJOShttps://www.amazon.com/Asunflower-GeForce-N13P-GL2-A1-660498-002-Graphics/dp/B01MF91A4P I noticed that my computer doesnt have a cable connected to either the MXM_LVDS or UMA_LVDA ports which are located right above the MXM slot. Is this related to my problem? I've inspected the hardware and there does not appear to be a lose cable anywhere.  As far as I can tell there is nothing to plug into either one of those two ports. I have also updated my bios, disabled secure boot and all power management functions (suggestions I read in other posts). So far nothing has worked.  I've included a copy of my msinfo32 and a picture of the motherboard. I'm at my wit's end, so any assistance would be greatly appreciated.  

A:HP Omni 27-1057c video card upgrade

Hi, The first card is compatible with the 51 machines including the following 27" machines HP Omni 27-1010ef AiO PC FRHP Omni 27-1200a AiO PC AUSTHP Omni 27-1200ee AiO PC ARABHP Omni 27-1200eg AiO PC GRHP Omni 27-1200er AiO PC RUSSHP Omni 27-1200es AiO PC SPHP Omni 27-1202ed AiO PC NLHP Omni 27-1210xt CTO Desktop PCHP Omni 27-1265ef AiO PC FR the second card is compatible with 14 machines insluding the following 27" machines HP Omni 27-1100ee AIO PC ARABHP Omni 27-1100er AiO PC RUSSHP Omni 27-1100et AiO PC TURKHP Omni 27-1101ed AiO PC NLHP Omni 27-1101er AiO PC RUSSHP Omni 27-1140eg AiO PC GRHP Omni 27-1180ef AiO PC FR  Your 27" machine is not in BOTH lists therefore the simple answer: they are not compatible with your machine. Regards.

Read other 1 answers
RELEVANCY SCORE 45.2

I am trying to play videos from a website, but I get a message that says that I cannot play the video due to my location. Is there a way to still watch the videos?
 

A:Can't play video due to location

Doesn't sound like you can. However you didn't provide any information.
At least post the website URL!
 

Read other 1 answers
RELEVANCY SCORE 45.2

We have a video and in box see at left three choices photo, video and photo and video. Ours is a video with audio. On right side we see a mail symbol. So do we click the video button on left side then the mail button image on the right side and expect a place for email address of file to pop up with the video file attached?

Read other answers
RELEVANCY SCORE 45.2

I want to install a new better graphics card but I don't know where the location of the video card is.

My model is an "HP Pavilion dv7-2713cl"
 

A:Location of video card?

Read other 7 answers
RELEVANCY SCORE 44.4

Hi folks,
On a Windows 7 system, where do I go to locate the version of video card?
Having webcam issues and have to know if it will support the cam.
Thanks.
Lee
 

A:Solved: Video Card location?

Right Click on "My Computer" and select "Manage" from the pop up menu.

Wait for the Computer Management screen to open and click on "Device Manager" in the left hand pane.

Expand the "Display Adapter" listing in the right pane by clicking the "+" sign next to it.

This will display the name and model number of the adapter. Double click on it if you need more details like the driver version.
 

Read other 3 answers
RELEVANCY SCORE 44

I have a new laptop, a Dell Precision M4400. The first thing I did was a format and a clean install with Windows 7 Ultimate. So far, so good, and it certainly seems to be an improvement over XP.

Being an oldtimer, I like to partition the hard drive and put all of the data folders onto the D: drive. It makes it easy to backup, and lets me reload the operating system without losing information.

Windows 7 lets you change the location of the user folders My Documents, My Music, My Pictures and My Videos. I used that feature to move all to the D: drive.

Since then, in Windows Explorer there folders that were moved are shown as multiples of the D: drive.

In Computer > Local Disk C: > Users > My Account >

the folders are listed as below:

AppData
Contacts
Desktop
Downloads
Favorites
Links
Saved Games
Searches

If, however, I click on my account shown under Desktop in the Explorer, the folders are:

AppData
Contacts
Data D:
Data D:
Data D:
Data D:
Desktop
Downloads
Favorites
Links
Saved Games
Searches

It's not a big deal, but it does seem a bit odd. The location option no longer appears when I right-click the moved folders, so it seems that their existence as those default folders is no longer valid, or it isn't possible to restore them to their original location.

I thought of deleting my account, and creating a new one but that seems a bit extreme as all other functions are good. The registry does show the My Documents, etc. as all being the D: drive, but e... Read more

A:My Documents/Pictures/Video Location Change

Hello Stephen, and welcome to Seven Forums.

It seems like the WARNING under step 9 in the tutorial below is what happened to you.

User Folders - Change Default Location


Backup the contents of these folder to be safe, restore the default user folder locations, and delete any user folder that does not have the "Location" tab in it's properties windows. Now repeat moving the default location for the user folders, be sure to use the tutorial above to not avoid the issue in the warning at step 9.

Hope this helps,
Shawn

Read other 4 answers
RELEVANCY SCORE 44

Hey

I want to watch some episodes, for example: http://www.nbc.com/Las_Vegas/video/episodes.shtml from NBC but I'm in the UK and I get that warning up saying the clip is not available from my location.

I've tried using some USA proxies but that didn't help, kept getting the same message.

Is there any way to bypass this ?
 

Read other answers
RELEVANCY SCORE 43.2

So, this is a bit odd. I built an upstairs office in my shop, it's like a loft. I am going to describe our network as best I can, and the problem and maybe someone can help us out.

Downstairs (right from where Rogers service comes in) we have a 24 port switch, the modem and a D-Link router

Upstairs we have a TP-Link 8 port switch, another D-Link 16 port switch.

The PC is a custom built i7-4790 @ 4.00GHz with 16 Gigs DDR3 Radeon R9 200, and it's running Win 7 64bit. It has wi-fi (disabled) and a gigabit lan.

We're not stressing the machine or the network much, Quickbooks, Office applications, and one thing I think it might be important to mention. The QB company file is stored on this machine and shared across 4 PCs total. We've also had network problems since we "upgraded" to QB 2016

I will post several attachments to give you an idea of our setup. We have a decent internet service (20/10 or something) and downstairs doesn't seem to have a problem. Upstairs however, we have choppy "rolling" sound from media. It will also pause from time to time. Here's the thing, the media is stored on the same machine that is having the problem. If I use my trackball and just roll the wheel it'll roll the sound too if you follow..... If I open a new tab, same thing. If I open a new program same thing. open a folder, same... Essentially, anything I do causes it to happen. The AV is Trend Micro, and I have tested it with this disabled. In f... Read more

Read other answers
RELEVANCY SCORE 43.2

I have a Gateway laptop - an MX6439 with a Mobile AMD Sempron processor 3400+, 1.8Ghz and 448 MB of RAM. I have had no troubles with it until earlier today, when I tried to play some music and it gave me an error that read, "Windows Media Player cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program, or it might not be functioning properly." When I delved into my sound devices settings, I found that most of the audio/video devices, specifically the Audio Codecs, Legacy Audio Drivers, Media Control Devices, Legacy Video Cappture Devices and the Video Codecs, have no location. Under that heading, it just says, "unknown", and claims that the device is working properly. I have had this laptop for a while now, and the only thing notable is that there are two magnets in the carrying case I use to take it with me - they have done no damage to the computer itself, so I doubt it was those that did this. I tried everything I could think of, and this is decidedly over my head. Can anyone lend a helping hand?

PS: I know for a fact that I did NOT uninstall any drivers, I never delve that deep into the computer unless I absolutely have to. I also know that all my sound devices were working just fine yesterday and the day before, so I honestly have no idea what could have done this.
 

A:Solved: Audio/Video driver troubles, location unknown

Try a System Restore to an earlier time and date when they were working.

go Start>>All Programs>>Accessories>>System Tools>>System Restore

Then restore my PC to an earlier time.

Pick the dates in Dark Blue only.

BTW PCs and Magnets don't go together very well.
 

Read other 2 answers
RELEVANCY SCORE 43.2

I was reading in the tutorials about changing default location of files and folders and not sure if I understand it correctly. I would like to take my Windows 7 Library and move it from my C: drive to my HDD which is D: C: is my SSD 80gb that has my windows 7 on it and D: drive is a 500gb HDD that I use for storage. I use iTunes and the music and movies take up way to much space on the C: drive. In the past I have tried installing iTunes on D: but all music and video's went to those folders on C: If I can relocate the Libraries, my space problem would be helped greatly.

A:Question regarding changing default location of Music and video files

Hello Jack,

Yep, you have it confused just a bit.

You would not be able to move a library since a library is just a collection of folders.

If you like, you could include a folder (new folder if needed) that's located where you want to save the files at in a library. Afterwards, set that folder as the default save location of the library. This way anything you save into the library will get saved to the folder by default.

Hope this helps,
Shawn

Read other 9 answers
RELEVANCY SCORE 40

OK, I've googled and searched for this as much as I can. I'm a new Windows 7 user. I have a library (Documents) with three folders included. Call them folders A, B, and C. I understand how to set the default save location. Let's say I've set it to Folder A. Now, I want to save a file in *Folder B* by using the convenient Libraries button. Let's further say that Folder B is the location "C:\FolderB". It seems that IF there is a subfolder, say "C:\FolderB\test", I can save it there by clicking Libraries, expanding FolderB, and double clicking on "test". HOWEVER, if C:\FolderB has no subfolders, I can't seem to save there by using Libraries.

That is to say: IF you have a folder in your Library that is not the default save location AND that folder has no subfolders, there's no way to save there by starting from the Libraries button. Is this correct? (If so, it is rather disappointing and seems to undermine the idea of Libraries so I hope I'm missing something...)

A:Saving to a library location that is NOT the default save location

I might be missing your intended idea, but if you name the folder, such as "Test B", then you should be able to save the .ext (if named) to that particular folder by clicking on the "C" drive... wait for it (the drive) to show up, then save.

If you name a .txt file (or another extention) and save it to your desktop, you can also move it to that named folder on "C" drive.

Just curious as to why you want to have different named folders on "C" drive when you can use the Documents folder?

Read other 3 answers
RELEVANCY SCORE 39.6

Not sure if this is the correct catogory to post my question in, but here goes. I have a HP Omni 100, about 6 yrs old. About a month ago, I went to the restore function & my computer crashed. Now, all I keep getting on my screen, after the initial start up is select keyboard function, or something of that nature. I hope I have not lost everything I have in that computer, since I have pics I cannot replace. Two or three months ago, it started to act funny. The page I was on would turn into a smaller square in the middle of the screen, and that square would be full of multi colored lines.(Like snow on a tv screen) Now I cannot get it to do anything but show the keyboard page????? Please advise as to what I could or should do. THANK YOU Roger
 

Read other answers
RELEVANCY SCORE 39.6

Hi,My pc monitor suddenly just stop working. But there isnt any port available to connect to another monitor. All my work is this pc and i need to extract them, is there anyways to do it? Also is it advisable to get it repair?

Read other answers
RELEVANCY SCORE 39.6

I have a all in one HP OMNI 200 pc. The computer came with windows 7 but was upgraded to windows 10 about 6 months ago.   Was trying to do a recovery/reset and it froze up with the following message:RecoveryYour PC /device needs to be repaired.  The operating system couldn't be loaded because the kernal is missing or contains errors.File:/windows/system32/ntoskrnl.exeerror code 0xc0000221

Read other answers
RELEVANCY SCORE 39.6

I keep getting the error "Location is not avalable F:\ refers to a location that is unavailable........" in windows 7. Sometimes it shows as "SYSTEM (F) and other times as a picture of a drive with a question mark over it ans F:\. I have done a check disk and the command prompt "gpupdate /force" as suggested on a site but no luck.

I have looked at other solutions but nothing seems to pertain to my specific problem. Any help will be appreciated. I have attached screenshots.

A:Location is not avalable F:\ refers to a location that is unavailable

Hello and welcome freislander mate just download this and it should open up and show all the drives with their letters.
Partition Manager Server, server partition manager and partition magic server for Windows Server 2000/2003/2008. Server Partition software for Windows Server and None-Server partitions < handy tool to keep for later too.

Read other 9 answers
RELEVANCY SCORE 39.6

how do i change my network location to its true location

see where my web sites on msn is?

A:change my network location to its true location

is there not a way to change this?

Read other 3 answers
RELEVANCY SCORE 39.2

I have an All in one desktop Omni 27 1001ed. Now I want to use my external HD 3TB but it only reconize 2TB. Can someone explain what to do to get the other 1TB also. I have already changed the disk to GPT and formatted it again. Still no result. 

Read other answers
RELEVANCY SCORE 39.2

Hello world!The problem is I have the HP Omni 27-1002er and have no idea how to add a second monitor to it.Where can I find video out port?Thank you!

A:HP Omni 27-1002er

Hi, It does not have out port for an external monitor:      http://support.hp.com/in-en/product/hp-omni-27-1000-desktop-pc-series/5186974/document/c03262527/ If you wish, please use USB to HDMI or USB to DVI adapter such as:       http://www.officeworks.com.au/shop/officeworks/p/comsol-usb-to-dvi-hdmi-vga-adaptor-cou2dhvad Regards.

Read other 1 answers
RELEVANCY SCORE 39.2

Omni 100 all in one pc will not boot/power up.When I push the power button, I can hear the fan engage and spin but nothing comes up on the screen. The first time I tried to turn the computer on this morning,the little blue light on the lower right corner DID light up but nothng else happened. After watching/waiting for 10 minutes, i held my finger on the power button to turn the machine off, waited a few minutes, hit the button again. The second time, the fan started going but the blue light did NOT come on this time. I waited 5 minutes and nothing happened. This time, I just pulled the plugg out of the wall and waited 10 minutes, plugged it back in, hit the button, same thing,,,fan engaged, no blue light,,,fan just spinning/whirring but nothing comes up on the screen. I have another one of these computers and i switched power supplies and the power supply is fine.

Read other answers
RELEVANCY SCORE 39.2

I'd like to upgrade the RAM in my all in one and I'm finding conflicting answers on whether this can be done.  I currently have  8GB (2x 4GB DDR3 1333 SODIMM- 10600)I've got Windows 7 Home Premium 64 bit as my OS.Most of the specs for my computer list 8GB as the maximum amount of RAM possible, but another source on the HP website advises that it depends on the OS, and that with Windows 7 premium 64 bit, 16GB is the max.I don't want to purchase memory that won't work.  Can someone confirm which is the correct maximum amount of RAM for this model? Thank you!

Read other answers
RELEVANCY SCORE 39.2

Can I add an SSD drive to an Omni 27 (1200ev)  or do I have to replace the original drive? Ideally I'd like to retain the 2TB hard drive and have at least the OS on the SSD. Kind Regards, Brad

A:Can I add an SSD drive to an Omni 27?

Brad, Here are the specs for your HP Omni 27-1200ev Desktop Computer and its IPISB-NK (Lavaca3-SB) motherboard. Based on the specs, this model only supports two SATA drives. One SATA data cable for the hard drive and one SATA data cable for the optical drive. Please send KUDOs

Read other 8 answers
RELEVANCY SCORE 39.2

I just recently started having this problem, I would go away from the comp leaving it on sleep for about an hour come back and it would not let me open any programs, security options and even after several restore's and virus checks it still is giving me the problem, sometime it fixed itself but this time it has not. Any solution to do it other than a full wipe, The programs work in safe mode but other than that no other mode works
 

A:Problems with my Hp omni all in one pc

You can try a System Restore. If you aren't familiar with that process, you need to indicate which version of Windows you are using (XP, Vista, Windows 7) so we can direct you.
 

Read other 3 answers
RELEVANCY SCORE 39.2

Hi, I have bought ALL IN ONE HP OMNI 120 PC from Singapore. Currently i am in india and am facing issue with the PC that it is not booting. When i checked with Local HP support they said, the motherboard needs to be replaced. However, the motherboard is not available anywhere and am stuck with the PC as i didnt find the replacement motherboard. Please let me know where i can get the motherboard for this PC and the cost of it ? Also, provide the warranty details of the motherboard. Also, i would like to know,whether it is advisable to replace the motherboard or buy a new PC?

A:want to buy All in One Omni 120 PC motherboard

Hi,Can you please provide the exact model of your Omni 120 PC for further help. Let me know,David

Read other 1 answers
RELEVANCY SCORE 39.2

I have some issues when I OCR with this software, specifically with PDFs, I get black outed boxes on the images, Any ideas? I can post examples if needed,
 

Read other answers
RELEVANCY SCORE 38.8

Hello:
Please I really need your help. I don't know what happened with my desktop HP Omni 100Pc. I can turn it on but when it is about using it it completely crash and freezes.
It has windows 7 home basic 64 bits sp1 . It is an old computer but it was working great.

I'm unable to restore it to previous point because all my restore points where deleting. I was scanning my computer yesterday with norton antivirus and my hp turned off by itself.
If want to check my documents or even open a photograph, my computer crashes.
I used to use auslogic software but as it expired I opted to delete it.
Sometimes when I wanted to download something and the norton block I would turned off the antivirus for a while and turn it off. I rarely use my computer because mostly I do everything on my mobile device but since I started studying I really need and now it is not working. Please help me I don't know what to do and I don't have money to fix it or buy a new one


Sent from my iPhone using Tapatalk
 

A:My desktop all in one HP Omni 100Pc

Read other 7 answers
RELEVANCY SCORE 38.8

Hello Friends....!!! Just want to share the feedback , experience of TAB OMNI10 from HP. It is third class product with major issues in touch and Motherbaord, infact i approach them to provide me extended warranty then there team denied for the same as they know there product is very poor in performance. So Pls dont go with this product . 

Read other answers
RELEVANCY SCORE 38.8

I have had problems with the touch screen on my HP Omni 10 not working for some time, sometimes it works and sometimes not. Recently it has taken about 15 mins for anything to appear on the screen when I boot up. Now nothing appears on the screen when I boot up. I know the power is on as it buzzes when you touch the MS logo at the bottom of the tablet

Read other answers
RELEVANCY SCORE 38.8

This is to inform you that i have purchased HP Omni 10 last year and unable to use it for a single day with satisfaction. Touch and motherboard has been changed during warranty period but still the issue comes with new touch.   This product is like a garbage for me and i will not recomend this product to anybody. I want complete replacement of my product or return my money. Otherwise i will esclate this to the consumer court. Thanks Gurpreet Singh

Read other answers
RELEVANCY SCORE 38.8

Hi Folks,

i am using omnipage 16 version for OCR purpose,i want to run the .exe in my application but the condition is it should run in the background meaning (NO GUI)..if i give parameters to it should take and processes it and giveback the output..the whole thing should be done in the background because the client shouldnot know about this Omnipage.

this is my urgent requirement.
 

A:Omni Page .exe should run internally

This is a duplicate post!
 

Read other 1 answers
RELEVANCY SCORE 38.8

Posted in the notebook section as this all in one uses mainly notebook parts. I am looking for the part number / availability of the option video card upgrade. I will also the proper hp heatsink. Other than knowing this a MXM type, I have been unable to find part numbers. Wish I had the option at time of purchase, but FRY's did not stock the unit with upgrades. Thanks

Read other answers
RELEVANCY SCORE 38.8

I added a micro sd card to increase the stoarge capacity of my omni 10.  I thought the card that was previously installed was a "space filler", I was not aware that it contained the recovery system. Somehow out of nowhere, bitlocker was installed on my notebook, and my device begain vibrating and indicating that it had crashed.  So I rebooted it, and was unable to continue wihtout inputting the bitlocker password which I don't have.  There was very little by way of outside software on the device, so I decided to recover the unit, only to find out that I had discarded the micro sd recovery disk.  I do have all the original paperwork, and found my product number serial number and so forth.  I downloaded a windows 8.1 from HP website, but it wouldn't install, because the version I downloaded didn't match the id on the motherboard. I have now ordered a new recovery disk from ebay for $5, and will attempt to recover the system, I don't know what will be left of the tablet, but I can live with it whatever it is.  I had already installed Office 2016 on the device so I could have my current version of outlook on all my devices, and can reinstall it.  My only question is what is on the motherboard, and how can I know it.  All I know is it is windows 8.1 I' think, and I don't know what version it is  or even if there are multiple versions.  I can't find an answer on the website, and can't locate a contact for custome... Read more

A:omni 10 operating system

It is Windows 8.1 Standard (Home) 32 bit. HP does not make Windows 8.1 available for download so you likely got a retail version from Microsoft. But what is odd is that Windows 8.1 Home does not have bitlocker...only Pro version so that is a mystery.  From here I cannot really understand what you are asking.   The exact model number of the laptop or Product Number would help tremendously. If the recovery disk you got for $5 is for the correct model series it should work but will provide a bare factory reinstall. 

Read other 1 answers
RELEVANCY SCORE 38.8

I was reading these posts on the Hp all in one.  The same thing has happen to mine. Just get a Blank screen.  Did this end up being the Mother Board???  Mine is only 3 years old. Any information on how to preceed would be wonderful Thanks 

A:Re: All in one Hp Omni 27 blank screen

Hi @esleman,Thanks for becoming a member of the HP Support Forums. I understand you are having an issue with blank screen. I will be glad to help you.Please post the full product number and operating system in use on your computer. See the following, if you need help with that information.How Do I Find My Model Number or Product Number?Is the Windows Version on My Computer 32-bit or 64-bit?Please get back to me with above information, so I can help you better.

Read other 1 answers
RELEVANCY SCORE 38.8

hey guys i have had a hp omni 100 all in one pc and it was working fine its 6GB RAM IS only thing ive customized on it since i bought it. and it randomly stopped loading or doing anything past the POST screen it will literally do nothing I have tried reinstalling the ram multiple times I tried using the CMOS jumper but it hasn't done anything please help
 

A:HP Omni 100 All In One Freezes At Boot

Have you tried swapping the CMOS battery in case it needs replacing?
 

Read other 1 answers
RELEVANCY SCORE 38.8

I finally got my printer to work with windows 7 but it won't print shipping labels with stamps.com, ebay & paypal. They all say they are unable to communicate with the printer. I get a message to enable bi-directional communication with the printer and I can't figure out how to do that. I would appreciate some help. Thanks.
 

A:Solved: omni directional

You've marked this thread solved.
If this was intentional and is correct, could you please post the solution that you found so that others can benefit.
If not, I suggest that you click "Mark Unsolved" at the top of this thread. That makes other helpers more likely to step in with suggestions. Hopefully you'd be in a position shortly thereafter to click "Mark Solved" for real.
 

Read other 1 answers
RELEVANCY SCORE 38.8

hey all. I was wondering if anyone could suggest to me a freeware wireframe and navigation design app.
similiar to omni graffle for the Mac and Microsoft visio for the PC.
I don't need anything that's fancy as long as it makes my job easy and cuts to the chase in my layout and planning for a couple of websites that I will be doing.
 

A:freeware like omni graffle

You could use Open Office Draw or DIA.
http://www.openoffice.org/product/draw.html
http://live.gnome.org/Dia
 

Read other 2 answers
RELEVANCY SCORE 38.8

Posted in the notebook section as this all in one uses mainly notebook parts. I am looking for the part number / availability of the option video card upgrade. I will also the proper hp heatsink. Other than knowing this a MXM type, I have been unable to find part numbers. Wish I had the option at time of purchase, but FRY's did not stock the unit with upgrades. Thanks

Read other answers
RELEVANCY SCORE 38.8

I recently replaced my desktop with a new HP desktop. I installed my scanner software (not new). I am now getting a message to register my scanner software at every startup. I find no way to disable this popup from the window that comes up, I cannot register through OMNI because it is likely no longer supported. Is there anything I can do from my desktop, short of uninstalling software, to eliminate this popup on startup?

thanks
marcelo
 

Read other answers
RELEVANCY SCORE 38.8

When I insert the CD-R, the PC does not seem to recognize it.I cannot determine if this PC is even capable of burning to a CD-R.

A:I have an HP Omni 200 PC. I cannot burn a photo to a CD-R. C...

Hi, There are many HP Omni 200 machines, what is your ? The following link shows one of them             https://support.hp.com/us-en/product/hp-omni-200-5300-desktop-pc-series/5035328/document/c02671736 It should be able to burn CDR and CDRW. Please use CyberLink software which came with the machine to burn. Regards,

Read other 1 answers
RELEVANCY SCORE 38.8

Tthe HP Omni 120-1134 can have a max of 8GB of DDR3-10600 (PC3-1333) RAM and comes with 4GB.Does it originally come with [email protected] cards or [email protected] card?





DeskJet 3755 ePrint

Read other answers
RELEVANCY SCORE 38.8

Hi all!I have an all in one Hp Omni 27-1001es and i have a really big problem!!! Yesterday i was working on pc and needed to leave it for some minute.When i got back the screen was blank and the pc looked freezed; i tried to reboot and nothing changed!!!!At start up the power button led works, the fan starts to work and the led of hard drive too but the screen continues without signal of life. Unplugged everything, opened the case to clean from dust, checked the Ram and nothing appears to be burned or disconnected. Thanx for any helpLeo











Solved!
View Solution.

A:All in one Hp Omni 27 blank screen

Hello Leo3680,

 

 I understand your computer powers on but doesn?t show a display on the monitor, is that correct? I will be happy to help you.

 

If you haven?t tried already start with a hard reset.

 

1.       Remove all  cables from the computer including the power cord

2.       Press and hold the power button for 30 seconds

3.       Once done only insert the mouse, keyboard, and power cable

4.       Try and turn the computer on to see what happens.

 

 

Please respond back at your earliest convenience.

Thanks

Read other 7 answers
RELEVANCY SCORE 38.8

I currently own an All-In-One HP Omni 27 PC. For about 6 months now, the monitor has gone dark. The light at the top turns on and the fans will run, but the monitor will not come on or show the HP loading screen. I have tried the BIOS fix, but once completed, my computer does not reset like the instructions say it should. Has anyone else had this problem or know of a solution?Thanks,Noah

Read other answers
RELEVANCY SCORE 38.8

Hi Folks,

i am using omnipage 16 version for OCR purpose,i want to run the .exe in my application but the condition is it should run in the background meaning (NO GUI)..if i give parameters to it should take and processes it and giveback the output..the whole thing should be done in the background because the client shouldnot know about this Omnipage.

this is my urgent requirement.
 

A:Solved: Omni Page

I am not sure omnipage was intended for this purpose. I.e. the developers of omnipage want people to know that they are using their programme.
 

Read other 1 answers