Over 1 million tech questions and answers.

I think my power supply died !

Q: I think my power supply died !

Hi, this is my first post, so I hope I can explain what happened to my pc clearly. I have an older gateway 450mhz and recently I tried to power it up and nothing happened, like it didn't have power. So I reset my power strip thinking it just tripped the breaker, and it started to come on, I could hear it power up and then it just shut off again, no power, lights or any thing. so I plugged it directly into the wall. and the same thing happened, started to power up, and it was like it would reach a certain power level and trip some kind of internal breaker or something.
Hopefully there's someone out there that knows whats wrong and if its worth fixing..... Thanks alot for any replys
Melajewels

PC is a Gateway 450mhz
With Win XP on a 80gig HD
And Win Millennium on a 2gig separate HD
128 Ram

RELEVANCY SCORE 200
Preferred Solution: I think my power supply died !

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: I think my power supply died !

Read other 9 answers
RELEVANCY SCORE 74.8

Presently have this power supply:

Antec BP500U ATX 12V 500W Power Supply

http://www.amazon.com/Antec-BP500U-...1?ie=UTF8&s=electronics&qid=1297041715&sr=1-1

Computer overheats and shuts down. On checking, the fan in the power supply stopped working. Looking to replace the power supply with a different brand. The fan in this one was LOUD.

I'm running an Intel Core i7.

Does it matter what brand/type I replace the power supply with? (I see 550w, 600w, dual power. Should I consider any of these?)

Are there any recommended brands/models that keep it very cool and very quiet?
 

A:Power Supply Fan Died

Read other 7 answers
RELEVANCY SCORE 74.8

Hi all,

my power supply died two days ago. By chance, everything else seems in
order, except for the USB ports which act strangely.

I bought a new power supply and installed it. The computer boots normally
and the OS starts without a problem when there is no USB devices plugged to
the motherboard.

If I try to plug something to the USB ports while the computer is on, there
is no problem and all my USB devices work fine.

But if I boot with the USB devices plugged to the motherboard, the computer
doesn't even try to boot (nothing happens when I press the power button).

Someone have a hint?

If the USB ports are not working properly, should I change the motherboard (in case it blows up something else with time) or just disable USB ports and buy a PCI USB card?

Thanks!
 

A:power supply died

Read other 9 answers
RELEVANCY SCORE 74

My power supply died a few days ago and I have replaced it. My PC will now boot but will not send a signal (turn on) the monitor. Everything on the PC seems to work but it just will not turn on signal to the monitor. I have tried two different monitors with the same result.

Help!?!?!

Thanks,

Tod
 

A:Power supply died, now monitor will not power on

Read other 11 answers
RELEVANCY SCORE 74

I built this new computer about a month ago.
core i5 2500k
GTX 570
8gb of ram
Windows 7
Old Power Supply: http://www.newegg.com/Product/Produ...ords&cm_mmc=KNC-GoogleAdwords-_-pla-_-NA-_-NA

It's a pretty by the book build. Last night though, I walked into my room and noticed the power off, and it wouldn't turn on. I opened it up, checked all the connectors, gave it another shot, and nothing.

My old computer had a 750 watt Cooler Master (http://www.newegg.com/Product/Product.aspx?Item=N82E16817171024) in it, so i took that out and tossed it into the new system while I wait for OCZ To send me a new PSU. Everything seemed great, I did my normal tasks for the rest of the night. When I launched Battlefield 3 though, the PSU actually makes a very odd buzzing noise. I don't remember this at all from my old computer. The red warning light doesn't go on or anything, it just buzzes. It also happens in Dungeon Defenders. The second I turn either game off, it stops.

Right now I'm back to basic tasks, but is this just due to the extra load from the new system? My old computer probably could have run fine off something much weaker than 750w (it had 8800 gt / Q6600), so I'm wondering if this it's just finally getting a workout or something. It has always run fine, I'm not sure why it would act up in the new comp. I'm sort of stuck until OCZ Gives me a replacement. Is it safe to run this thing?
 

A:Power Supply Died, Replaced With Old One

Read other 13 answers
RELEVANCY SCORE 73.2

I have a Lenovo Thinkcenter i7 M92 that worked a while ago and when I turned around to work on another computer, it apparently turned off and now the power will not come back on. The power button wont even light up, nor will the lights where the network cable plugs in. Have tried different outlets, different power cords. I am thinking it is a power supply issue but I cannot find a power supply to order. Any suggestions would be greatly appreciated.
 

A:Lenovo Thinkcenter M92 - Power supply died???

I was looking at eBay (I have an older LeNovo), noticed there are a few Internal power supplys there.
How did you make out so far? a couple 200 watts and 230 watts ones.
 

Read other 2 answers
RELEVANCY SCORE 73.2

2 days ago the power outlet that my computer was placed into was kinda half exploding. And the "lightning protector" that was attached into it died. I was trying to connect the computer to a different power outlet , and the computer won't turn on.
Not sure what happend... So Idk what to do... Should I buy a new power supply and see if everything is ok? Or just give the computer to some lab and have em to "make it work" ??
 

A:computer died / power supply replacement

Anyone? No sense? It's not like a genius question. Just kind of a "your opinion"
 

Read other 3 answers
RELEVANCY SCORE 73.2

Bit of a long story for this but bear with me.

I was playing a game this past sunday when my main pc lost it's power, after it died I heard what sounded like metal hitting metal within my case, I took my power supply out and took it apart to find what looked like a coil wrapped around a plastic tube, half burned, so I guess it melted itself off. It was my fault as the inside had tons of dust clogging the fans and vents. Luckily I had a backup for just such a problem, I borrowed the power supply within this secondary pc, it has a 1000watt psu(sli ready) whereas my old had a 600w(also sli ready), I figured it would be a more than suitable temporary psu until the replacement I ordered arrived.

However for whatever reason it won't work in my main pc, whenever I boot it up, everything seems fine but after so much time of being in use the pc just loses power. If I do nothing it will stay on, if I do anything other than idling it loses power. If I scan using MSE it always crashes around 7 minutes or so of scanning but spybot can scan completely, if I browse it tends to take a bit longer to crash (around 30 minutes more or less). I have ran a temperature detector in the background as I scanned and did other things and nothing ever went above 50C so I'm fairly certain that it isn't a heat problem.

To be honest I've been pretty lucky with most of my past pc's, I've had this one for about 8 1/2 months and other than a few random crashes this has ... Read more

A:Power supply died, backup won't work.

THat is frequently a result of a power supply burning out. Especially if it was a lower quality manufacturer PSU
 

Read other 2 answers
RELEVANCY SCORE 73.2

I have a 6.5 yr old e9180t which the power supply died on me this weekend. The unit has an interesting history. The mother board was defective when I bought it and they had to finally replace it along with thousands of others. This unit coined the term inherently defective with google at the time. They rolled it our before really vetting it properly. When I looked inside the box when I first got it I noticed how crammed the interior was compared to my previous unit.  This unit has always run HOT. After years of the heat build up I eventually just removed the side panel due to the heat. So when the power supply died this weekend I discovered another big design problem with this unit. For the first time I removed the top plastic panel . . .  this panel completely hid and covered a vent for the power supply the whole time! The vent was completely covered with thick dust. I literally had to peel the dust off this area. I always used air to blow the dust way inside but since there was no vent visible I had no idea about this issue and never saw the need to remove the top plastic cover.  So I plan to replace the power supply and have two questions. 1. First what is a good replacement? I see that EVGA makes these power supplys where both ends of the wires are plug in which seems like a perfect DIY approach. The current dead power supply was a Samsung 460watt HD642jj. I use two 27" hp monitors with this unit and work on graphics mostly during the da... Read more

A:Need to replace an overheated power supply that died for my ...

After posting this I thought about the issue with the power supply and HP must have installed the power supply upside down and that is why this power supplied died and why this unit was always super hot. I just looked at the power supply and yep I think it was upside down. For years I have been plugging this in on the upper right hand side not the left hand side. The only person who has worked on this computer was the guy who was hired by HP to replace the motherboard after two months since the board was defective from the get go. I wonder if he had taken it out and put it back in wrong? I don't know since I thought HP and the guy knew what they were doing and I had no idea to keep a close eye on how the power supply should be. Unbelievable! 

Read other 2 answers
RELEVANCY SCORE 73.2

Hi. This is the story. In the middle of my son using the computer, it just shut down. I came down to the room where it was a minute later, tried flipping the master switch on the surge protector off and on, then pressed to power button on the case. It started up. A few minutes later my son called me again because it had shut down again. The former trick didn't work. Here's what I've tried:

Flipping the I/O switch on the power supply both ways and trying to power up.
Unplugging the power supply from the surge protector and plugging it with another cord directly into the wall outlet. Then flipping that I/O switch again.

Nothing happened. Does this sound like it's the power supply?
 

A:Computer died!! Is this a power supply problem?

I`m afraid it does sound like the psu has gone bad.

However, the only way to tell for sure, is to try another psu, and hope that`s all it is.

Regards Howard
 

Read other 6 answers
RELEVANCY SCORE 72.4

My system has 3 HD's. The SATA is an add on, with a sata pci card, just for storage. The 2 IDE's are setup for dual boot with XP Pro on both(C:drive & D:drive). One is more for gaming, the other is for everthing else. Everything has been fine for several months until my power supply burnt up. I had set up a dvd to burn when I went to bed and the power supply died during the burn process. I replaced the power supply and now cannot get my C: XP to boot completely. I can however boot to my D: XP and access my C:drive and all of its files as well as my SATA storage drive.

On bootup, I select the XP installation that is listed first which is my D:drive, all goes well and evething works. If I select the second installation which is my C:drive all seems well... It shows that Windows XP is loading but when it normally goes to the screen that allows me to enter UserName and Password all I get is a black screen and it just stays like that. No error or reboot... nothing.

Would really hate to reformat(take about 2 days) as I had just got it setup the way I want it. Since ntloader does come up and allows selection would it be safe to assume bootini is ok? Is it probable that the death of my power supply could have cause corruption to kernel32.dll? What say you?
 

A:Power supply died, 1 of dual boot inaccessible

Have you tried doing a Windows repair on the C: partition?
 

Read other 3 answers
RELEVANCY SCORE 72.4

I am now in China. My W540 power supply stopped work yesterday. My machine is still under base warranty. What I can do now? It seems there is no IWS (International Warranty Service) here. I cannot understand why. Please help! 

A:traveling in China, W540 power supply died, what I...

I am sure that you can located one in China for fairly cheep, especially since they are probably made there anyway, and then upon your return, have the original replaced under warranty.     Ask around, there must be a computer outlet somewhere that sells parts that can locate one for you in China.    It may be a knockoff, but it will get you by for your trip, just make sure the voltage/amperage match that printed on the original.

Read other 1 answers
RELEVANCY SCORE 71.6

a few hours ago, my mom brought home a brand new Acer Travelmate 4603WLCi laptop. after connecting the AC adaptor to the laptop, I turned the thing on. it worked just fine, and the Acer ePower Management software showed 33% battery power and still charging.

I was playing Solitaire back then, only for like 20-30 minutes, when suddenly the laptop just died. plain died. without shutdown.

so I turned it back on, and it went back on. only for like a few seconds after the Windows XP splash screen showed up, it died again. this time, I can't turn the thing on again.

I checked the adaptor cable that connected to the laptop, it's plugged firmly. however, the 'battery charge' lamp did not lit. I disconnected the adaptor cable, tried to turn on the laptop, it didn't work. I tried removing the battery, re-installing it, then tried turning it on again, also didn't work.

so I re-plugged the laptop to the adaptor, and thought that it'd charge up. but after 3 long hours of (useless) waiting, it's still not showing any signs of life.

I assume that this is a power adaptor failure, because when you connect the adaptor to the laptop, the 'battery charge' light is supposed to lit and you should be able to power-on the laptop. but hey, if the adaptor fails, aren't I supposed to be able to power-on the laptop by just the battery?

well, that's all I can tell for now.
thanks in advance for any advice(s) given.

cheers!
... Read more

A:my Acer TravelMate 4603WLCi died. power supply failure?

Acer Travelmate 4603WLCi laptop shut down

Hi Dhaninugraha:

The situation you described back then, now looks quite familiar to me.

The same happened to me last night. My Acer Laptop just died, just as you described. I did all the things which are common things to try to make it back working again...NOTHING !

How did you back then solve the problem. Did you find out what the failure was?

I would really appreciate any help you can provide.

Best,

franziskaner12
 

Read other 2 answers
RELEVANCY SCORE 57.6

I have a W540, which currently uses a 170W power supply (20V 8.5A) I also just recieved a docking station for a P50 which has a 230W power supply showing 20V 11.5A. The connectors look the same, but I'm hesitant to try the 230W power supply in the W540. Should this be ok to use the 230W power supply with the W540?













Solved!

Go to Solution.

A:Power Supply Question - Can I use the 230W power supply with a W540?

230 watts is the maximum power supply, it only supplies the power needed by the computer. I sold my W540, so i can't test this for you. But i do the use the ThinkPad X1 Carbon with the 230 watts power adapter without any problem.

Read other 2 answers
RELEVANCY SCORE 57.6

I have 2 failed Z800 power supplies (1150 watt version). After some internet research I am led to believe this is a common problem and related to the PS capacitors. Since I do not know how to do this capacitor replacement (yet). I thought I would buy a new PS. However, I do not want to buy a Z800 PS since it seems to me to be a defective design. Can anyone chime in and tell me if the new z840 1125 watt PS will work with my older z800? I have called HP support and spoken with the correct support people on this and they were not able to confirm if the Z840 PS will work (fit) on the z800. The closest confirmantion I recieved was that if it fits then it should work. Instructions to fix the capacitors:http://h30434.www3.hp.com/t5/Business-PCs-Workstations-and-Point-of-Sale-Systems/Z800-power-on-issue... Same issue I am facing:https://www.youtube.com/watch?v=f563JGeoxaw On a side note, can anyone recommend a good service tech to make such capacitor repares in Southern California or insrtuctions on how to make this repair (with pictures). Thanks    

Read other answers
RELEVANCY SCORE 55.2

I have a DellHP-145SNF Power supply.
These wire's are coming from the Voltage regulator/control PCB inside the P/S.
There are 6 wires involved.
Here are 3 questions that I have,
1 - What is the Orange - "Power Good" looking for?
2 - What is the Brown wire for.
3 - What is the Purple - "+5VSB (Standby)" used for.

The Gray is Power ON when hooked to ground.
Black goes to ground.
Blue/White goes to -12V.

Jay
 

Read other answers
RELEVANCY SCORE 51.2

Hey, i'm building a computer but i haven't realized that the power supply i need is an atx 2.0. What power supply should i get??

I was orignally looking at the Ultra X-connect but it doesn't support atx 2.0 Damn.
 

A:power supply atx 2.0 any suggestions as to a power supply?

Read other 10 answers
RELEVANCY SCORE 50

Toshiba Satellite L305-5955, Ive taken apart and replaced power jack. Not directly soldered to motherboard. While still apart, and battery out/in, connected power supply and still absolutely no response. Power supply is NOT original, and slightly different specs, i.e original 19v..6.3A

current 19v..3.1A
 

A:Toshiba Satellite L305-5955 does not respond to power supply, new power jack

Almost certainly the problem is that the current rating is wrong, if the laptop needs
6.3 A of current, it won't function on less (just as you can't use a 3A fuse for a kettle!)
Unfortunately it must be the right current rating, I know, I've been caught that way too!
Maybe you can exchange it?
 

Read other 2 answers
RELEVANCY SCORE 50

Ever since i got this new motherboard and CPU ive been having a bit of a nightmare with it.

Gigabyte ga-ma790fx-ds5 -Latest Bios
AMD Phenom Black Edition 9850,
4 gigs PC 6400 ram (Corsair XMS2 CM2X1024-6400
ATI Radeon 4870

The problem is that the motherboard will NOT power up at all with the 2 of the latest power supplies (600 watt+) i have.

It wont work at all with; (Nothing happens its just dead)
Arctic 600 watt Jeantech PSU (brand new and working)
Corsair 620 watt HX PSU (working)


It only seems to work with my Jeantech 450 Watt PSU and i cant for the life of me figure out why. Ive tried everything to get the board to work with the new PSU's. I had thought that the PSUs i got were dodgy but after testing out one in an older PC it worked fine.

Ive removed all parts and tried powering up and i cant get it to boot up. But the PC seems to work fine with the oldish 450 watt PSU which i find just unbelievable.

Can anyone help with this nightmare? Now on the Gigabyte site the CPU i have isnt listed as supported by this motherboard which is kinda worrying could this be the reason? If so how the old PSU boots up.

I just want to have the fracking thing working with the right PSU.
 

A:Power Supply Wont Power up - Gigabyte ga-ma790fx & AMD Phenom 9850

if I read the specifications right on your mobo... it implies that it has the 4 pin PCI-e input(power) but it also has the 8pin ATX power conector. (it may be simply removing a cap that is actually right next to the 4 pin connector, thus making it an 8 pin connector (thats how it was on my mobo)

Try using the 8pin power with your new PSU, see if that works.
 

Read other 7 answers
RELEVANCY SCORE 50

I'm interested in the Toshiba G25 laptop but have heard that you can't use it on airplane seat power. It comes with a 120W AC power supply (15Vx8A), but I've been told that most airlines limit seat power to 75-90W max. Lind sells a 12V car adaptor for the G25, but specifically won't include an airline plug for this reason (which I can get independently, of course). I've read some interesting electrical discussions on this board. Can ya'll comment on the following or provide any general advice about power consumption?

1) Given that the voltage of the laptop and airline seat power pretty much match up (12-15V), if the amp draw on the laptop exceeds what the airline power supply can deliver, what will happen? Will it damage the laptop to feed it insufficient current? Will it shut down the laptop altogether? Merely dim the screen?

2) If I remove the laptop battery, which requires power to charge it, how much will that reduce the power need of the laptop? I'm not sure how to work the math, but the spec sheet states the battery supplies 4400mAh at 8A output. Does it require the same to charge it?

3) Most importantly, on my 15 hour transpacific flights, will the DVD player work with that ultrabrite screen at the low airline power supply? A nice feature of the laptop is that you can watch DVDs without powering up the Windows operating system (it has a small linux OS for the DVD player). Granted, the DVD drive and screen are prob... Read more

Read other answers
RELEVANCY SCORE 50

Hi, so I have had a powering issue with my previous power supply which was the Corsair CX600W so i purchased a newer power supply - the EVGA SuperNova G2 550W. I unhooked my old psu, hooked up my new one and the PC turned on and I turned it back off from the power button on the case. I also hava a boot drive problem so I unplugged the sata cables from my SSD and wanted to try to turn on the PC with only my HDD. I did this with the PSU switched off and the power cord unplugged. When I tried turning the PC on again the PSU made a clicking noise and nothing turns on. The motherboard Led's are lit up so it is definitely getting power but when I go to turn the computer on it just makes a quick clicking noise and nothing turns on. Any help is appreciated, thanks!
 

A:Power Supply makes clicking noise when I press power button

You may just need to drain the power off from the power supply and try again. Unplug the power to the power supply, press and hold the power button for 30 seconds, then plug it back in and try to turn on the computer again. If that doesn't put the old power supply back in and see if the PC works, or was the old one dead? If the PC works with the old one and not the new one then you may have gotten a faulty power supply.
 

Read other 2 answers
RELEVANCY SCORE 50

I have a Dell 8600 about two years old. When I plug in the AC adapter, it intermittently fades to the battery as though the plug was pulled out (its not) and of course the screen fades in an out when every time it swithces--it does it every 30 to 60 seconds or so. I switched to a different AC adapter (I have a Dell 600M with the same AC adapter)-same thing so I know it is something internally. Any ideas?
 

A:Dell Laptop Power Supply Fading In and Out--power jack is bad or loose?

Read other 14 answers
RELEVANCY SCORE 50

Hi,
I picked up this Alienware 5700 off ebay to hopefully refurbish for my son but I'm new at this and still learning and so this thing has me baffled. The laptop is in pristine condition but shows no signs of life. When I plug in the power supply the green light on the power supply goes from solid green to blinking rapidly to the point you can barely see it. To me that would mean a short somewhere right ? If so where ? Has anyone else ever had experience with something like this ? I just don't want to go buying a new battery for a laptop that maybe fried already. Any help would be greatly appreciated.
 

A:No power, no lights but green light on power supply blinks rapidly

Remove the laptops battery and try the AC power only. If the green light does the same, it still could only be a bad AC adapter, or at worst, a shorted laptop motherboard
 

Read other 1 answers
RELEVANCY SCORE 50

I have an enquiry relating to video cards. In order to do my job, I need to get a card with at least 512MB of VRAM, preferably 2GB. However, the ones I've found online use 300w What's the maximum watts that I can use with my Lenovo H520s? And what would happen if I used a 300w video card in it? 
 
Mod:  edited Subject with a problem description













Solved!

Go to Solution.

A:What graphics card will my H520s power supply support (PSU, power calculator)

Use a power supply calculator to get a accurate calculation of your power requirements.   Graphics card manufacturers have to figure a worst case scenario when giving power requirements.
 
 www.coolermaster.com/power-supply-calculator/
 
Mod:  removed the Newegg calculator, which only gives a recommended psu size, rather than a power calculation.   The CoolerMaster gives both. 

Read other 9 answers
RELEVANCY SCORE 50

Yesterday in my house,electric fuse was switched to turn on cooker in my kitchen. During this power delivery was stopped for 4-5 second only.
When power back on then pc automatically turns on and just before bios show me :"?Power supply surges detected during the previous power on ASUS anti-surge was triggered to protect system from unstable supply unit.
Press F1 to continue.? And then pc booted fine to Windows.

Is this normal ? Did it damage something? Why i get that message is this normal?


PC:
6700K stock
16GB DDR4
Asus Z170-P
Corsair 750 RM
Gtx 1080
SSD 1x

Read other answers
RELEVANCY SCORE 50

Hello: Just received a beautiful W530 Laptop - love the T and W versions of this machines. However, with such a large power requirement, want to make sure that I will be able to run and charge the W530 on United Airlines, American Airlines, etc., using the supplied 170 W Power supply...  Please confirm your experience that this will work. Otherwise, using this laptop on long haul flights will not work. 

Read other answers
RELEVANCY SCORE 49.6

I have an enquiry relating to video cards. In order to do my job, I need to get a card with at least 512MB of VRAM, preferably 2GB. However, the ones I've found online use 300w What's the maximum watts that I can use with my Lenovo H520s? And what would happen if I used a 300w video card in it? 
 
Mod:  edited Subject with a problem description

A:What graphics card will my power supply support (PSU, power calculator)

Use a power supply calculator to get a accurate calculation of your power requirements.   Graphics card manufacturers have to figure a worst case scenario when giving power requirements.
 
Newegg - Power Supply Calculator
 
 
 

Read other 2 answers
RELEVANCY SCORE 49.6

Had to up upgrade my power supply on my hp envy 750-116. The new power supply(500b evga) does not have a power cord for the slim laptop like drive. looking for possible fix for the problem
 

Read other answers
RELEVANCY SCORE 49.6

I've recently inherited a lovely Y70-70 touch from my father, and have restored it to factory settings recently. However I'm having issues at the moment where it shuts down instantly at random times when not plugged in. Checking the system logs in the event viewer I see the following Critical message: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Generally online help seems to suggest this is a power supply issue. Have I got a duff battery in here? Are there further diagnostics I can run? Unfortunately I'm out of warranty so keen to solve this myself!

Read other answers
RELEVANCY SCORE 49.6

It's been a while since I built a system from scratch and have a... errr... simple question

gfx: Sapphire HD3850 512MB Ultimate (passive)
http://www.sapphiretech.com/us/products/products_overview.php?gpid=225&grp=3

MB: MSI P35 Neo2 FIR
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1261&maincat_no=1

PSU: Seasonic M12II 500W
http://www.seasonic.com/product/pc_retail.jsp

The motherboard has a power connector for the graphic card next to the slot.

Is there any reason I should connect the power for the card to the power connector on the board instead of directly to the power supply?
 

A:Graphic card power to power supply or connector on motherboard?

First time I have ever seen that feature. I like it. I'm thinking that is a neat/easy way to partially eliminate cable clutter from the PSU. Give it a shot, you can always revert to PSU cable if you wish.
 

Read other 1 answers
RELEVANCY SCORE 49.6

Sorry I don't know the proper terms, but basically the pin inside the jack where the power cord gets plugged into on my laptop was bent so that it's really hard for me to plug in my power cord and have it stay in place. My warranty with best buy has expired, so I need to figure out how to solve this problem on my own. I can't just leave it like this because the cord comes out really easily and I can't continue to work with such a tenuous setup. Anyway, is this just a matter of replacing the entire unit inside my laptop? I know you probably need more information, but I'm not sure what to provide, so please ask any questions. The laptop is a Toshia M-45, about 3-4 years old. Thanks in advance
 

A:Bent power supply pin - Hard to plug in power cord

umm.. bend it back so it's closer to normal? That's all I can say about it. usually works for me.
 

Read other 1 answers
RELEVANCY SCORE 49.6

I have a Sony VGC-RB42G computer. I recently moved my computer, cleaned off all the dust, and when I plugged everything back in, it won't power up. The light on the power supply blinks green, inside the motherboard also has a green light that blinks as well. It has a ticking sound too, but I am not sure if it is coming from the power supply or the motherboard. Any idea what could be wrong.

FYI, I have already unplugged everything from the power supply, pulled out the ram, checked the battery, and put everything back together and still no change. One thing I thought was strange was after I unplugged everything, I pulled the power into the power supply again and this time the green light came on but did not blink. It stayed solid.

Help
ncleo
 

A:No Power, Blinking green light on power supply and motherboard

Sounds like a Power Supply problem.
 

Read other 1 answers
RELEVANCY SCORE 49.6

Hi,I have tried two batteries.Checking the Battery  Icon on Thinkpad it  reports 88% ChargingSometimes it fails to boot up then I have to remove battery and press power button while applying the mains adaptor.Any suggestionsThank You 

Read other answers
RELEVANCY SCORE 49.6

Hello guys.  Can anyone help me understand the power supply on the HP Envy Phoenix 860-019?  The PCIE connector 6 pin connected to the GTX 960 has black and white wires.  Shouldn't there be yellow and black wires?  Yellow is usually 12 volt and black wires ground.  Is the 6 pin connected to my GTX 960  supplying a standard 75 watts of power or something else?  I want to install a GTX 1070 but the 6 pin wire colors are not the industry standard color scheme.  Also there is a 2 pin power connector with a white and black wire.  Usually a 6 pin and a 2 pin can be used together to connect into a 8 pin socket on a GTX 1070.  Will my connectors supply the needed power and connect properly because the color scheme on the wires make no sense. Thank you

Read other answers
RELEVANCY SCORE 49.6

I have just bought a Dell 19.5 V 90 W power supply adapter for a Dell from ebay. The PSU turned up this morning without a power cord. That's annoying enough but when I looked the connector needed is a type I have never seen before. The centre pin is slightly longer and wider than the other two so I assume that is the Earth pin. The centre pin is also offset between the other two. Again I suppose for connecting only 1 way. The two outer pins have a distance of just under 2 cms between them. Please can anyone tell me what type of connector this is. If I can get some info on it then I may be able to get one.

Thank you Terence



 

Read other answers
RELEVANCY SCORE 49.6

Hi, I just bought an HP pavilion e9300 a few week ago. And I am going to upgrade the power supply so that I can get a new graphic card--ATI 4870 which requires at least 500 watt power supply. My current computer is shipped with a 350 watt power supply. I will probably get a 650 watt considering the 70% effeciency of power supply.
However, when I talked to an HP technician, he insisted that I could go for a power supply with no more 450 watt. Because the system I just got has a motherboard which has a max power limit 450 watt. He said if I go beyond that, the motherboard will burn out.
So what shall I do? I really want to get ATI 4870 work well on my computer.
Thx very much.
 

A:Does power supply with higher power rating really burn motherboard?

The long answer is "No".
Just be sure of the dimensions of the power supply before you order a replacement, as HP uses some pretty strange sizes sometimes, and you want the new one to fit with room to spare.
 

Read other 3 answers
RELEVANCY SCORE 49.2

The HDD and Power LEDs on one of my computers have "died"
i.e. they no longer work. Both of them stopped working at the
same time. It's an old SOYO SY-6BA+III board. Everything else
seems to be working just fine..... any ideas?.... could something
have burned out / died to cause this?
Oh yes.... have checked the wires
 

A:My HDD and Power LEDs have died - help

Thanks Per Hansson.... yup, connected them to a 9v battery and
they are dead.... I'll raid some off an old case that I have laying
around.
Thanks again.

 

Read other 2 answers
RELEVANCY SCORE 49.2

My buddy was on his computer when it just up and shut off, and now it won't power back on. The motherboard LED won't even come on. Anyone know any way to fix it? I'm at a loss.
 

A:My buddies PC just died. Won't power on.

if you want, lend him your power supply and try booting it with yours instead.

Might be the motherboard as well.

Did he notice any overheating before it happened?
 

Read other 3 answers
RELEVANCY SCORE 49.2

Several months ago I upgraded most of my PC.
ASRock Z370 Gaming K6
i7 8700k Coffee Lake
Team T-Force Vulcan DDR4 2800 (16 gigs)
EVGA Geforce GTX 970
2tb SATA hard drive

This was all running on a Corsair 500 watt power supply. Now a couple days ago I decided it was finally time to upgrade, so I bought another 16 gigs of the same RAM listed above and a Seasonic Focus+ 750 Gold power supply. (I think) everything is hooked up the way it should be, only now it's sounding like my hard drive doesn't want to turn on. It'll make a whir like it's trying but then it just makes a sound like it can't turn on. I'm assuming this is the problem because my motherboard can't detect the hard drive, and it's still plugged in the same spot I had it originally when it was working. I believe it was slot SATA3_0_1.
Faulty hard drive? Or hopefully I'm doing something wrong so I don't have to screw with returning it.
Any ideas would be warmly welcomed!
 

Read other answers
RELEVANCY SCORE 49.2

Working on a dell dimension 2400,think may have bad power supply.Anybody know if that model uses a proprietary PSU? or will a regular industry standard one work?
 

A:Dell Power Dimension 2400 power supply

Should be a standard ATX PS.
 

Read other 2 answers
RELEVANCY SCORE 49.2

i Have Z50-70 . i bought it from 2 yearsi have now this problem when i plug charger in it this messege appered and charge icon say that( plugged in .not chargeing ) when i shutdown lap it charge . some times when i remove battery laptop not work . replug charger more times to work i try hold on power 30 sec . and load default Bios . and Wipe all Files . what is probleme please ? motherboard or socket charge or adpter ?  

Read other answers
RELEVANCY SCORE 49.2

Ok, so it's time again for me to pick a new power supply, however, I'm in need of some help determining the appropriate wattage for my hardware setup.

AMD Phenom II X4 955 45nm AM3
GSkill Ripjaw X 16.0 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Corsair TX750w (I dont think its the V2)
ASUS M5A97 (AM3r2)
***here are the voltages listed on speccy*** (if they are of any use??)
+12V 11.731 V
+5V 4.935 V
CPU CORE 1.284 V
VIN3 1.668 V
VIN4 2.148 V
+3.3V 3.132 V
VIN6 1.092 V
VIN7 1.632 V
VIN8 1.668 V
ASUS ATI Radeon HD 5870 (x2 in Crossfire @ 158w ea)
59GB Patriot Pyro SE SSD
31.3GB OCZ OCZ-ONYX SSD
LG HL-DT-ST DVDRAM GH24NS90 ATA

I have terrible luck with random bsod's and power supplies pooping on me, I want to pick one this time that will last me. Also, I have my power running through a Monster Power HT700, I live in a new apartment so the wiring should be ok, I've dusted out all of the components inside the case, double checked my connections, all that jazz. I've got a cooler over my memory, I am still using my stock cpu cooler, but thats changing soon (I get crashes @ idle too) Any help I could recieve I would appreciate, thanks

Andrew

A:Hardware Power Consumption-Picking a new Power Supply

You have pretty much the same problem as me (getting BSOD's randomly). For me it's bulging capacitors on motherboard. You should take a closer look for capacitors on your motherboard. Dead capacitors look something like that:
http://upload.wikimedia.org/wikipedi...densatoren.jpg

Read other 9 answers
RELEVANCY SCORE 49.2

Hello to the HP community. I must warn you all, this is a long thread and is potentially confusing, so only read this if you're interested in giving feedback. I am here today to not ask a question, but to share with you my confusion on your Pavilion desktop PCs. I've looked at the technical specifications for many of the Pavilion desktops, including my own, and I simply can't understand one thing; where do you get your PSU power ratings from? I currently have a Pavilion 500-319na: http://support.hp.com/us-en/document/c04343438.It's a good computer, powerful in most areas although the GPU isn't, so I'm looking to upgrade it. The first thing I check before I upgrade parts, and hopefully others do too, is the PSU's power rating. And this is where my problem lies. Firstly, your website states that for my PC, and others, it's an external power adapter. It simply isn't, as it's inside of the PC. I've seen in many discussions that this has confused people, including myself. And secondly, your website states that for many of the Pavilion PCs, including mine, the PSU is rated at 180W. Let me tell you why I believe is wrong: The PSU that comes with my PC, and presumably other Pavilions too, has four power outputs: 3.3V (12A) and 5.08V (10A) outputs, 'limited' at 70W. Then there are 12Va (7A) and 12Vb (10A) outputs. These apparently produce 180W. First of all, the 3.3V and 5.08V outputs can't be limited to 70W, in theory. This is because, using the equation... Read more

Read other answers
RELEVANCY SCORE 49.2

Hi forum and pc gurus,

My problem is specified down to my PSU, at least I think so. (550W Logisys PSU - maybe the quality has something to do with it, I paid $19 for it from NEW EGG). I have A Gigabyte GA-965P-DS3 Motherboard, a Intel Core 2 DUO Conroe 2.13GHz processor with heatsink and Fan, Sapphire ATI X1950 Pro, 2 GIGS of WINTEC DDR2 PC 6400 (800) RAM, 1 SATA Maxtor 320 GIG HD, 1 2.5 inch SATA 160Gig HD, and two DVD Burner Optical Drives (both IDE).

I have it hooked up like this, two Optical Drives connected to 1 IDE connector/cable which is hooked into the IDE input on the motherboard, both are set to slave. Two CD outs (connected one to each Optical Drives) to one CD input on the motherboard. Both HD's are connected to SATA inputs on the motherboard, one is set for master, one is set for slave (I heard that it did not matter but wanted to state that anyway), then my ATI RADEON X1950 is hooked directly into my only PCI Xpress 16 slot. The power connectors are then all hooked into their respective inputs on the drives and Video Card. ANd last but not least, all the Power button and LED connectors are hooked into their input on the motherboard, wich I set up exactly as the motherboard diagrams and directions directed. I turned the switch on the PSU to on and I only got a faint mouse like squeek, then nothing, not even the fan. So I figured it was DOA, so I had newegg send me another. I got it today, installed it, hooked all the power connectors to the hardware, th... Read more

A:POWER SUPPLY FROM HELL! I cannot get my custom built PC to power on! HELP!

Read other 16 answers
RELEVANCY SCORE 49.2

I shut down my Pavilion Elite for 1 week while away and now it will not turn on. The power supply light is on, I replaced the CMOS battery and the power switch is ok.

A:Pavilion elite power supply light on, won't power up

As you did not mention any message or display on the screen, I would use this tutorial for a step by step diagnostic.  It also helps to remove the side panel, and visually watch the CPU and rear case fan movement(s).  As you press the power button, pay attention to the fans. Also does the Power Supply LED stay ON? Or did it go OUT when you pressed the power button?  

Read other 5 answers
RELEVANCY SCORE 49.2

Yea...so we finally got my girlfriends new PC up and running. The problem im having...or more of a concern really. Is when you flip off the power supply, and then flip it back on, the PC gets a short burst of power. IE the lights and fans all come on for a second or two. Then you can press the power button and turn it back on.

Any ideas guys?
 

A:Power Flashes when I flip the power supply switch..

Read other 7 answers