Over 1 million tech questions and answers.

unwanted page break

Q: unwanted page break

Can anyone help with removing the pagebreak on page 1 (so as to bring page 1 and 2 together?) thanks

Preferred Solution: unwanted page break

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: unwanted page break

Hi ibm.

Not sure what overall result you're looking for, but try this.

1. Select the entire table.

2. Table > Table Properties > Row: uncheck "Specify height", check "Allow row to break across pages".


Read other 3 answers

I have a user that created a table in word.
The first two pages break correctly, but the 3rd page breaks about half way down the page. The fourth and fifth pages look fine. The first couple of rows on page 4 are small enough that they should fit on the bottom of page 3...... I would appreciate any suggestions.

A:table break/page break in Word

Click in table.
Hit Table-->Select table
Check the following settings:

1. Format-Paragraph, Line & Page Breaks tab. Keep with Next and Keep Rows together--turn OFF

2. File-Page Setup, Layout tab. Alignment must be Top (not center)

3. (for Word 97)
Table-Cell Height & Width. Allow rows to break across pages must be OFF.

3. (for Word 2K)
Table-Table Properties. (I forget which tab.) Allow rows to break across pages must be OFF.

It could be a combination of 2 or more of the above 3...

Read other 1 answers

We are using Word 2003 SP2, running on on WinXP version 2002 SP2.
to briefly illustrate our problem:

Say I have four Word files, called B, C, D and E. Each file is three-to-five pages long, and each file ends with a Next page section break, created by dropping down the Insert menu and selecting Break... > Next page. Remember that - each of the four files ends with a Section Break (Next Page).

I create a fifth file, called A, which is a composite of files B through E inserted as links (because I want to be able to update files B through E and then pull those changes into file A). My new and blank file A is open, and I drop down the Insert menu, select File, and navigate to the file called B. I press the Insert button at the lower-right of the Insert File window and select Insert as Link. I repeat this process for files C, D and E so that, when I finish, file A is made up of files B through E, each inserted as link.

When I review file A and scroll from top to bottom, I notice that file D's text does not begin at the top of the page following the end of file C's text, as you would expect with a Section Break (Next Page) inserted at the end of file C, but rather the Section Break (Next Page) has somehow turned into a Section Break (Continue) during the linking process to file A, and so file D's text begins on the same page and a line or two below the end of file C's text. This is bad.

Can someone tell me how I can prevent my Section Break (Next Page) f... Read more

A:Section Break (Next Page) turns into Section Break (Continue)

Read other 7 answers

I have worked out how to set the print area using a macro, but what I want to know is can you make the excel not split the data between pages. So if you have a block of information is there a way to have a macro or VB code that moves the line breaks so that the print area must always keep that block of information on the same page.
Thanks David

A:print area and setting page break to show block of info on same page in Excel

Hi, I guess a macro is the best solution but it must be written, you'll have to calculate the number of rows and columns per block v.s. the page size to set the page break.
This includes margins, header rows and foorter rows.
You could record a macro and then set the blocks of data as you need them.
Stop the recording ans see how it's done, then edit it to suit your purposes and replace the fixed references to dynamic ranges

Read other 1 answers

I am trying to have A5 column width be 10 from line 1 to line 50 but on A5 line 51 and on I want the width to be 10. How do I do this?

Read other answers

How do I insert a page break in Acrobat 7? Looked in the help files but way too much stuff comes up...anybody know? I'm new to this program. Thanks.

Read other answers

Can some please tell me how to remove the page break from a word file ?? its between the second and third row of a the table.

it has a dotted line going across and i cant do anything to it to remove it

A:Word Page Break

Sounds like an automatic page break. What's happening that you don't like it there?

Read other 3 answers

Hi I am trying to print pages off the net which are set with page breaks (you can choose with or without pagebreaks), but when I go print preview/or print, my computer seems to abandone the page breaks and prints the pages overlapping.

Is this a setting I can control adjust in IE

I use IE7

This has only started happening recently

Any help would be gratefully appreciated

A:Page Break Handling

On these pages, did you check for a Printer Friendly version?

Personal rant:

There is a problem with the defaults in WEB publishing, especially when CSS (Style Sheets) are used. Ever notice how some pages print with the right side chopped off (at least in IE6, I hear IE7 takes care of this problem)? The problem stems from a long-time issue of HTML formats (including CSS) of defaulting to pixels for sizing. IMHO this is a very BIG mistake, the default for sizing should be percent. This would allow your WEB pages to automatically resize to the viewer's screen AND resize for printing.

Many WEB Publishers take the lazy way and just use the pixel default and do not notice what affect is has on viewers, especially when printing, hence the extra work of publishing a Printer Friendly version of their WEB page.

Read other 1 answers

I have a file which is slightly wider than letter size and about 10 pages in length.
I don't want to change column width so I select fit to in page setup.
When I go print preview after that, horizontal page breaks are gone.(only at the bottom of the print area)
I go back to page set-up and select Adjust to: which now less than 100% due to trying to fit in letter size width. Now, page breaks are back.
Should I do this every time, or is there any way to see page break even though I select fit to?


A:Page Break Excel

Read other 6 answers

I have a word doc that is multiple pages. Right in the middle of a table is a dotted line going across . When printed it looks like a page break. How can I remove this line.

A:dotted line not a page break

Read other 7 answers

MS word will, for some unkown reason, not automatically insert a page break. You can manually input a page break but word will not do it on its own. I have never seen this problem before. I am running MS office 2003 on a Dell XPS 4100 with Vista.

I have already uninstalled office and reinstalled it to no effect.

I am open and happy for any suggestions

A:automatic page break not working

Read other 10 answers

Not having a knowledge of word(or the pc for that matter).my problem is this.I have a word doc. saved.Now I would like to enlarge the font size.Which necessitates changing the page breaks.In my attempt to do this ,I wind up with only a quarter of a page on two or more pages.Went to Dreamboats,website but that didn't help.This is not an earth shaking problem for me but if you can help,I would hope you can pretty basic.Thanking you in advance.

A:Solved: need some basic help with page break

Read other 12 answers

I am working with large word documents that have been converted from DCF format. These have unwanted "blank pages" sprinkled throughout the document. I can neither delete nor write on this page.

I need help!!


A:Word Page Break problem

Read other 10 answers


I have a report in MS Access that is to return up to 32 records, no more, but possibly less. For the date, a user inputted criteria, there can be more than 32 records for the day. What I did is work with the page margins to be sure that only 32 are returned on each page, which works great.

The problem comes in when I try to sum the amounts. I need the first 32 records on page 1 to sum, then have the next 32 on page 2 sum independent of the first page, and so forth. I tried putting =sum([Amount]) in the page footer, but this gave me a #Error. Is there any way that I can either force a page break after 32 records so that it will treat each 32 as its own set of data? If not, is there any way that I can get the sum in the page footer to work? I've been pulling my hair out trying to solve this one, please help.

Thanks in advance,


A:Page break in Microsoft Access

Read other 9 answers

The little black square is in the margin to the left of a paragraph at the top of page 3 of my document. I have text boxes on all 13 pages occupying the left half forcing the text outside of the boxes to align on the right side of the pages. The boxes are aligned with the left and bottom margins and the anchors are locked. The same thing is happening at the top of page 2 but nowhere else in the document. I can't figure out what the difference is or how it got this way. I've double-clicked on the square to get into Line and Page Breaks in Paragraph Formatting and unchecked all of the options with no success. The line above does show an auto page break. Any ideas?

Read other answers

Hello Good Morning,

I was wondering if anyone would be able to help me move a pagebreak using VBA. I have a form and it is variable in the number of rows and the height of those rows, there are groups of data that do not have a consistant height (could be 12.75 a row or 100 a row) and also no not have a consistant number of rows. (excel 2002) I have researched for 2 days and have not found anything that did this or something like this (that I understood anyway)

1) Page Set Up 100% of normal size THEN
2) Checks make sure the page break is NOT in the middle of a data set
3) If it is, Move it.

Say the data i do not want to break up is in rows 30 - 40, then 42-56, then another group of 8-12 rows I know I am not supposed to use the "Select" Option, but my idea to get this to work is,

Select Rows (30:39)
If pagebreak is here then
select pagebreak
move pagebreak to Row 29
end if

Select Rows (42:55)
If pagebreak is here then
select pagebreak
move to Row 41
end if

Select Rows (No Page Break Here For all my data set)
If pagebreak is here then
select pagebreak
move to Row 41
end if

end sub

Does anyone have any thoughts? Is there anyway to pull this off? Or something that will have the same effect?

I dont mind tedious, when I am getting a new macro to work.

(I have taught this all to myself using the VBA book for dummies and wonderful forums like this, but generally speaking all of the Dim Boolean Loop types of code I have not needed to sort out yet. Help in e... Read more

A:Page Break - Not in specific locations.

I've come across something like this once before.


For your example, I created the four "names ... to be defined" ("curly" quotes must be replaced with "straight" quotes).

Then, w/r/t "Select Rows (30:39)" I made row 39 way high so that the "boundary" rows would definitely be on different pages.

Then I ran this:

Sub test()
Range("A30") = "=PageOfPages"
Row30Page = Range("A30")
Range("A39") = "=PageOfPages"
Row39Page = Range("A39")
If Row30Page <> Row39Page Then
MsgBox "We need to tweak the layout."
End If
End Sub

With r39 way high it gives a prompt. Resetting r39 to default height and re-running gives no prompt. Do you follow?

Read other 3 answers

When doing a Page Break Preview, there a a page break for all cells, so the print option is set to print a page per cell.

Using Page Layout --> Remove Page Break (or alternatively Reset All Page Breaks) does not solve the issue.

One solution is to change the Size from 8.5 X 11 to 8.5 X 14, but I do not wish to print legal size.

A Google search, typically returned the Remove Page Break solution.
Any solutions?

A:Excel 2010, every cell has a page break

Read other 12 answers

Well, I'm having a problem figuring out where to put this post.

But here's the problem. My computer has spontaneously put a page break across my saved documents, and nothing I can find in the help file removes it.

I've even tried removing a cell from below the break and pasting it above the break, and the machine just corrects and returns to the previous appearance.

Gene Douglas

A:False page break on Word document

Read other 7 answers


I know very little about coding, but have found it very useful...does anyone have any ideas for code that would look at a spreadsheet and insert page breaks with the criteria that if several items are the same (e. g. phone numbers) they would be forced onto the same page - putting the break at the top of the next page?
I already have code that will insert a break at every change - what I need is, if I have the page formatted to have 10 rows but the numbers come in groups of anything from 1 to n together, if the numbers (going down in a column) are: 111222333444 and the page allows for 10 rows, the break would be after the 3s, but if the data was 12223334555 the break would come after the 4.
Thanks to all in advance!

Read other answers

I have a Microsoft Word 2010 document attached. That document consists of 2 pages.
Page 1 is formatted with 1 column, has some text and then has a Section Break (Next Page)
Page 2 is formatted with 2 columns and has some text with a Column Break.
I want to get rid of the Section Break (Next Page) on Page 1 and replace it with a Section Break (Continuous) so the top of page 1 is formatted with 1 column and after the Section Break (Continuous) formatted with 2 columns.

No matter how I insert a Section Break (Continuous) before the Section Break (Next Page) and then delete the Section Break (Next Page), the previously inserted Section Break (Continuous) changes to a Section Break (Next Page).

A:Word 2010 Section Break (Next Page) problem

Read other 6 answers

I would like to create a mailmerge document with "consecutive" data (ie: first name, last name, gift amount) that I want to keep in the SAME page from one record to the next until I get to the real bottom of the page. I cannot find a way to make the merged document NOT put a page break between each record (word 2007). Where can I find such a command?

Also when I tab between each field, the fields line up for the FIRST record, but then they are out of wack for subsequent records. How can I assure that the data in the records will line up throughout the whole merged document? ie:
first name1 last name1 amount1
first name2 last name2 amount2
first name3 last name3 amount3
etc, etc., etc.

Thanks for any help you can provide.

A:Solved: word mail merge page break

I've used the merge feature quite often in the past, using the Mail Merge wizard, which is still included in Word 2007. But I've never had occasion to do the type of merge you are wanting. But I have heard (in which forum I don't remember) that there is such a thing as a "directory" merge in Word, which prints a continuous listing of the data fields, laid out as you specified them in your post.

For my own curiosity, I just tried using Word 2007's Help feature to find information on a directory merge; sadly, it seems to be lacking, or missing entirely, from what I can see. But I just tried this, and it seems to work: Start the merge wizard, and when it asks you what type of document you are working on, choose Directory. This will allow you to choose to specify which fields, one by one, you want on each line of your printed listing. To take care of the column alignment problem, I would suggest that you create a one-row table (with or without borders, and with or without any before/after spacing you want) to hold the fields you want on each record of your listing. When I chose to complete the merge, using one of my own data files, Word produced a continous listing, one line for each record in my data file, filling each page until all data records were printed. Of course, you can specify which records you want included, if you don't want all of them, during the merge process.

Hope this will help.

Read other 3 answers

I have a form that I need to print on one page. Here's my current CSS:
@media print {
    div#formcontainer {display: block;}    form { font-size-adjust: .4;}    textarea {width: 98%;}    body {background-color: #ffffff;}    a {color: #000000;}    .page-break    { display: block; page-break-before: always; }    .address {width: 92%}}The page is printed via window.print() when a button is clicked.
This works in every browser I've tried, except IE (currently running IE 11. In IE, the Zoom shrinks the form so it fits on one page width wise, but it inserts a page break where it would normally put it if I didn't use the Zoom. I also loose the centering of the text at the top.I've tried using height and page-break-inside: avoid parameters, but no luck. Any help in solving this problem would be greatly appreciated.

Read other answers

Hi All,

This is a different question that I posted before. I want to get the page Break inside a table in MS word so I have
a table in MS word, Inside the table, I have a text called PageBreak in one of the rows of the table. As soon as I see this word PageBreak,
I want an actual PageBreak inside the table. I know how to achieve this if I don't have a table in Microsoft word by replacing the text with ^m, but I am having problem with page break inside the table.
I want to write this in a macro.

How can I acheive this.

Any help will be greatly appreciated.

Read other answers


How can I interchange the key shortcuts for inserting a line break with paragraph break one?

They are currently inserted by pressing Shift+Enter and Enter respectively. I would like to reverse that assignation.

I would like to get a new paragraph break when pressing Shift+Enter, and a new line break when pressing Enter.

The reason is because is much more common to insert new line paragraphs and it's more comfortable to use a single key.

How can I do it?
I've tried in Options -> Customize Ribbon -> Customize Keyboard Shortcuts -> but I Can't find the related functions there.

Read other answers

As there is no Break/Pause key on the keyboard ... What is the key stroke combo that allows you to do a ctrl-break? I have searched around and cannot seem to find an answer. I have tried all the variations that are listed on wikipediahttps://en.wikipedia.org/wiki/Break_key I have also tried the other suggestions that are listed on this site, however they are for other products, and they do not work for the Yoga 11s Ideapad

Read other answers

Hey Guys,

I use Word 97, but I am sure that this question is applicable for all Word versions. The Page Break feature in word seems to be self-explanitory (start a new page) but could you provide an explanation for the other page break features that appear in the page break dialog box? For example,
below the Insert Page break box, if memory serves correctly there is a "section break" option, and radio buttons that allow you to select a section break for a "new page" or a "continious page" and then to the right you have options for "odd" and "even" pages. (Please correct this if I am wrong here) My question is, when would you use the section break feature and wouldn't this just start a new page in Word? More important, what's the difference between selecting a new page section break vs. just inserting a new page for a regular "page break?" Any info or examples about the use of this feature would be helpful! Thanks!

A:Questions Involving Word's "Page Break" Options

Hi, Jack.

I need to write this up for my site, so I'll do it now and reply to you when it's done. You can have yourself a look-see. And when I say now, it's 9:30 PM EST and I can probably have it up by 10 or 10:15 tonight.

Read other 3 answers

I have Access 93 SP2.

I have a report where I am doing calculations on each row of data in the Sub Detail_Print. What is happening is that the detail line that is to print on the top of the 2nd page and any detail line to print first on subsequent pages is having this routine executed twice.

I have created the smallest possible report which simply selects a list of order numbers. The only section is the Detail. The only line in the Sub Detail_Print is

MsgBox "OrderNumber is" & Me.OrderNumber

In Preview, I see a msgbox for each line then the ordernumber that should print at the top of the second page shows its msgbox, the first page appears, when I click the arrow to go to the next page the same msgbox appears again.

It appears that Access gets the line, executes the code, decides it doesn't fit on that page, does the new page, regets the line and re-executes the code placing it on the new page.

I could find nothing on this anywhere. Has anyone else seen this? Is there some setting I am missing?

Thank you!

Read other answers

When I close down after using the internet often there is a web page remaining from a site I have not been on. It is a sort of pop-up advertising on-line gambling. Is it malware? nothing is showing on a routine scan.

A:unwanted web page

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a

Having problems with spyware and pop-ups? First Steps

link at the top of each page.

Please follow our pre-posting process outlined here:


After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

Read other 1 answers

I just bought this computer and already I am plagued by the unwanted "Conduit search" page and have thus far, been unable to get rid of it. Can anyone shed some light on this?

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium, 64 bit
Processor: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, Intel64 Family 6 Model 28 Stepping 10
Processor Count: 4
RAM: 2037 Mb
Graphics Card: Intel(R) Graphics Media Accelerator 3150, 256 Mb
Hard Drives: C: Total - 138525 MB, Free - 102719 MB;
Motherboard: Acer, Veriton Z290G
Antivirus: PC Cleaner Pro, Updated: Yes, On-Demand Scanner: Disabled

Actually, I am using Vipre Premium Anti Virus

A:Unwanted web page

Read other 12 answers

Windows xp, ie8.

I have been getting //rvzr-a.akamaihd.net coming up on my pc and I cannot see how to get rid of it, apart from the cancel X at the top of the screen.
Where is it coming from and can I stop it as it takes over the computer when loading.

A:unwanted web page

Read other 12 answers

I have started getting an unwanted web page show up on my pc.  I'm running windows 7.  In the tab it says (Sponsorship) on the address line it says    m.goodthingshappen.com.  Warns me that my computer is in poor shape.  That it is a certified Microsoft partner and wants me to download a repair tool.  I've run Malware and bytes, CC cleaner. Search and Destroy.  So far it doesn't seem to hurt any thing but it keeps coming back. yipnyapThanksEdit: Moved topic from Windows 7 to the more appropriate forum. ~ Animal

A:Unwanted web page.

 Install and run MBAM
Information about MBAM: http://www.bleepingcomputer.com/virus-removal/how-to-use-malwarebytes-anti-malware-tutorial
If this scan has been done, please post the log into your next reply.
  Running TDSSKiller to obtain log
Note: Don't cure or delete a threat, but choose skip for all instead.
Please download TDSSKiller from here and save it to your Desktop
Doubleclick on TDSSKiller.exe to run the application, then click on Change parameters

In the Additional options: Check Detect TDLFS file system
Click Start Scan and allow the scan process to run.
Choose for all threats to Skip for all of them.
Click Continue
Please post the TDSSKiller.[Version]_[Date]_[Time]_log.txt found in your root directory (typically c:\)
 ESET Online Scanner
Note: If your AV is blocking Eset online scanner, please temporarily disable your AV.
I'd like us to scan your machine with ESET OnlineScan This process may may take several hours, that is normal.
Hold down Control and click on this link to open ESET OnlineScan in a new window.
Click the  button.
For alternate browsers only: (Microsoft Internet Explorer users can skip these steps)
Click on esetsmartinstaller_enu.exe to download the ESET Smart Instal... Read more

Read other 12 answers

I seem to be infected with some malware that directs my browser to an unwanted web site--'Adultfriendfinder'.

In Safe Mode, I have run updated versions of AVG, Ewido, Microsoft Antispyware, Spybot S&D, CW Shredder, Adaware w/ VX2, Spyware Blaster, Spyware Guard. Also ran Windows Update for all fixes, etc.

I previously had a program listed in Add/Remove Programs called Mysearchbar, but I couldn't uninstall it, and a search of My Computer didn't locate it. However, the last set of scans seems to have removed it.

Also--possibly related--I am unable to enable Internet Connection Firewall on my dialup connection. I get a message 'Cannot enable shared access. Error 1060: the specified service does not exist as an installed service.' I don't know how to deal with this.

I'm using Windows XP Home.

Here's the Hijackthis log. Any assistance would be much appreciated.

Andy Mason


Logfile of HijackThis v1.99.1
Scan saved at 8:26:29 PM, on 2/3/2006
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\Program Files\Roxio\Easy Media Creator 7\Drag to Disc\DrgToDsc.exe
C:\Program Files\... Read more

A:Unwanted web page--possible hijack?

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst. I will be back with a fix for your problem as soon as possible.

Please be patient with me during this time.

We also suggest that you Subscribe to this thread to be notified of fixes as soon as they are posted by our Team. You can do this simply by clicking the "Thread Tools" button located in the original thread line and selecting "Subscribe to this Thread".

Read other 12 answers

ive got this problem with my internet explorer browser.
Each time i open it, my home page isnt the one that ive set, its changed to something about spyware.
I know that i have gotten spyware on my computer that is causing this, however none of my scans are showing anything.
Is there a way to delete it from the regisrty?
Any help would be great

A:Unwanted Home Page

please go through the 'Having problems with spyware/viruses' in my sig. This will help you get rid of the hijack, and remove all the spyware, and hopefully even speed up you computer.

Read other 1 answers


A:unwanted home page

You are infected with a variant of the CoolWebSearch.Download CWShredder from the below link and unzip it into a directory. Start CWShredder and click on the FIx button to have it remove all CWS infections it finds.Download CWShredder from:http://www.merijn.org/files/cwshredder.zipAfter you download the program, unzip it into a directory. Make sure all browser windows are closed and double click on the cwshredder.exe to start the program. When the program is loaded click on the "Check for Update" button, and if it finds an new version it will download it. You should then double click on cwshredder.exe again and click on the "FIX" button (not the "Scan only" button) and let it scan your computer.To get the best results it is recommended that you run it in safe mode. Reboot windows and press F8 at boot/windows startup, usually right after the beep. Then select safe mode.A tutorial that goes over this process step by step can be found here:How to remove CoolWebSearch with CoolWeb ShredderOnce that is completed you should follow these steps in order to clean your computer of Malware which can include Viruses, Trojans, Worms, Spyware, Hijackers and DialersStep 1:Download Spybot and Adaware from the following locations and install them. You should run both programs and clean up what it finds. This is to gaurantee that you find the most malware you can installed on your computer.Before running the scans on both programs, it is mandatory that you updat... Read more

Read other 2 answers

Hi, I followed your advice for Scrollisalegend about an unwanted web page... It was the same page that was plague-ing me, so I followed the same directions. Here is my Hijackthis log...
Logfile of HijackThis v1.97.3
Scan saved at 1:43:28 PM, on 11/3/2003
Platform: Windows ME (Win9x 4.90.3000)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:

R0 - HKLM\Software\Microsoft\I... Read more

A:unwanted web home page also

well if you had the same problem as Scrollisalegend then you had a CWS hijack, running the programs from that thread cured the problem, but to ensure you stay cured
read here and download the security updates mentioned at the bottom

Read other 1 answers

I have a Lexmark Optra Lxi + printer connected to a NetWare 4.11 server by parrallel cable. I have two new computers using Windows 2000 Pro and every time I print from those machines I get a sort of cover page with the users name spelled out ascii style:

and some other information including the app that sent the print job, time, etc. I can't seem to find out out to shut this function off.

I have 4 other machines running Win98 and they DO NOT get the extra cover page when they print.


PS I put this in networking because I'm not sure if the problem is with the server (Novell) or the clients printing on the network (Win2K)

A:Unwanted Cover Page

Read other 12 answers

Hey all,

I don't know how this happened, but I now have this default home page for some weird search portal which I don't know how to get rid of.

I can change to another page through tools->internet options then home page, but every time I restart the computer, it will go back to this default unwanted home page.

I have a feeling you need to change something in the registry, what I don't know - anyone have an idea out there or any other methods of getting rid of this.

I have tried using a few spyware detectors to no avail either.

Thanks - any comments very much appreciated

A:Unwanted Home Page

Read other 10 answers

I must have opened a funky e-mail. Somehow every time I reboot, the home page on my IE6 goes to a search engine that I do not want. I have tried changing the home page and it works until I reboot. I have also gone into regedit and changed the home page spec, but it still changes at reboot. How can I get rid of this thing?

A:unwanted home page

Read other 15 answers

My operating system is Windows 98. I have an annoying website that comes up as my homepage when I connect onto the internet. It doesn't always come up immediately either. What I see first is a message box saying that a plugin is in progress and then the unwanted webpage pops up. How can I once and for all get rid of this website file???

Thanks for any help.

A:Unwanted home page

Your Homepage has been Hijacked. Go to the security site on this Forum .
Download and run Hijack this and post your log in the Hijack this site and one of the Security Experts will help you.

Read other 2 answers

Hi everyone,
I have Win98 and IE6. I have inherited a very unsavoury web page as my home page and I cannot get rid of it. I reset the homepage to yahoo or similar but every time I boot up this other home page (porn)is loaded. I have tried deleting it and searching for it. The search said it was in temp internet files so I deleted it but still it comes back every time I start up. Very frustrating. Please help.

A:Unwanted Home Page

Read other 6 answers

Hi... I bet you guys get this a lot...... but somehow I've become stuck with some po*y searchco as my home page and I don't want it. Dunno how this happend. Can someone please show me how to get rid of it...

A:Unwanted home page ?!?

Click on the link in my signature to download Hijack This. Download it and click "Save".

Itís very important that you save it to its own folder on your hard drive, such as program files (not temporary files or the desktop), so that it can create proper back-ups and be able to restore them if necessary.

The downloaded program will be a .zip file. Extract the .exe file from it and save in the permanent folder you just created.

Click on Hijackthis.exe to launch the program.

Click the "Scan" button when the scan is finished the scan button will become "Save Log" click that and save the log.

The log should open in notepad. Click on "Edit > Select All" then click on "Edit > Copy" then Paste the log back here in a reply.

DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required.

Read other 1 answers

When I start the computer, it shows the desktop for a second, then a file opens. I just have to click the red "X" in the top right corner and it goes back to the desktop, but how do I get rid of the file that opens. It is called "common" and there's nothing in it.

A:Unwanted page at boot up.

What program is "common" opening in? Or is it a file folder?
Click the Help menu to see what program -- if it just says About Windows, then it is a folder that is opening in My Computer. If so, check the address bar to see the full path to this folder. If the address bar is not displayed, click View | Toolbars and check it. If your system is not set to display the full path, you can click the down arrow at the right end of the address bar, and that will let you see just where this "Common" folder is located. paste that path into your next reply.
Or, you can click Tools | Folder Options..., View tab, and check one of the Display the full path in the ??? bar options.

Whether it's a folder, or a file opening in a program, we need to find out where it's starting from. Copy and paste the following code into Notepad, then save it on your desktop as Runkey.bat Be sure you set the Save As Type: setting to All Files. Then double click the file. A notepad window will open up. Paste the contents into your next reply.

if exist regkey.txt del regkey.txt
>> regkey.txt reg query "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run" /s
>> regkey.txt reg query "HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Run" /s
>> regkey.txt reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer" /v DesktopProcess
Start regkey.txt
Also, check the startup folder (Start | All Programs | Startup) to see if ... Read more

Read other 3 answers

IE page scrolls when I press up/down arrows on my keyboard. Any way to get rid of this nuisance?

I have IE8, Vista SP2.

Read other answers

Hi..I'm new here so please bear with me.

Every time I switch on my pc and go online I get a web page come up that has replaced my home page of choice. A search engine I've never heard of and don't want.
I go into settings/general and delete it and put in my own web page of choice only to have it reappear next time I go online. Is there any way I can get rid of this for good and keep my home page of choice permenantly.

Thanks for any advice.

A:Unwanted home page ?!?

Read other 9 answers

I am running a Dell desktop win xp pro sp 3. I have a worm that I cannot remove. It will open additional pages in IE that seem to be selling or advertising info. I have the pop up blocker on. Using Avast professional addition. I have done a full system scan and a boot time scan, both indicate signs of a trojan but cannot delete or move. I also run updated versions of Ad-Aware and Spybot search & destroy and delete what they find. Also have run CCleaner and delete what it finds. I did have the postcard.exe virus/worm, but now it appears to be gone, but the IE pages still open as well as some pages won't open at all. Please advise what more I can do. Thanks - Kevin

A:Unwanted Page redirects and pop ups

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

Please copy this page to Notepad and Save it to your Desktop in order to assist you when carrying out the following instructions.

Before beginning the fix, read this post completely. If there's anything that you do not understand, kindly ask your questions before proceeding.
Ensure that there aren't any opened browsers when you are carrying out the procedures below.

It is IMPORTANT that you don't miss a step & perform everything in the correct order/sequence.


Please note that these fixes are not instantaneous. Most infections require more than one round to properly eradicate.

Please stay with me until given the 'all clear' even if symptoms seemingly abate.

Kindly follow my instructions and please do no fixing on your own or running of scanners unless requested by a helper.


Please uninstall the following via Start->(or My Computer)->Control Panel->Add or Remove Programs if it still exists:

Viewpoint Media Player<<This is ... Read more

Read other 2 answers

Really strange happening!!~
Hi guys
I use Windows 98

Until yesterday - whenever I logged in to the net, the first page I saw - and the one I wanted by default - was the www.megalink.net web site. (That is our ISP). But something happened yesterday that is very distressing. Since then, when I click on the I.E. icon to log-on , what comes up is a Google page - with the headline "I can Find It" at the top. And the URL in the address line is www.icanfindit.net/?aid=577.

So I went into IE Tools, Internet options, General and sure enough, that new URL is in the address line for the home page address. So I changed it back to the Megalink URL, clicked APPLY and OK. Then I manually changed the URL in the IE screen to Megalink, and it came up. I went back into Tools, Internet Options and clicked save current.

But when I log off and back on - the same problem recurs. And while the Google page is loading, this line appears on the task bar at the bottom of the screen: http://4-counter.com/?b=crue

Any thoughts?

anxiously - StanC

A:Unwanted starting page on log-on

Read other 16 answers