Over 1 million tech questions and answers.

Logman creates performance counters on Windows Server 2008/2012 correctly but incorrectly on Windows Server 2003

Q: Logman creates performance counters on Windows Server 2008/2012 correctly but incorrectly on Windows Server 2003

Hello,
I created the following performance counter using logman.exe.

logman.exe create counter US_Triton_Perf_Log -b 9/23/2015 09:30:00 -e 9/30/2099 18:30:00 -r -s $server -si $frequence -cf $folder\$server.txt -f $logtype -o C:\local\logs\Perfout_$Server --a -v mmddhhmm -rf $max_duration

When I do this across multiple servers specifically for Windows Servers 2008/2012, the counter is created to repeat and run everyday at 930PM and stops running everyday at 430PM. This works perfectly fine as intended. However, When I do this for a Windows
2003 server, my created counter is very different.
For example, in this case, I have set to the counters to start at 930AM and end at 1830PM, because I have set a maximum duration of 9 hours, the job terminates and begins on the next day, since I have the repeat option on. However, this does not apply to
our 2003 server; logman creates the job to run once a week in this case it would be on a Wednesday. In addiiton, I noticed that the job doesn't not even start at it's indented time. It actually does not start at all. I also notice that the jobs on all windows
2003 servers are created in a pending status, which then prevents me from removing the counter remotely.

I would like to know if windows 2003 is capable of working like my win 2008/2012 servers using logman, and if historically, the job has to be kicked off through scheduled task.




Both Jobs are using the same criteria, but are created differently. The top photo was created on a windows 2003 server and the bottom photo was created on windows 2012 server.

Am I missing something here.

FYI
I have a script to automate across 200 servers, so when I deployed this it turned out about 50 servers were actually running as intended, and a whole bunch of them were in pending status, and all stopped.

I appreciate any response on this issue.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Logman creates performance counters on Windows Server 2008/2012 correctly but incorrectly on Windows Server 2003

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 134.8

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 117.2

We had:

1) 1 Windows Server 2003 running Active Directory services to manage logon and permissions for file sharing.
2) 15 workstations.

We now want to have:

1) 1 Windows Server 2008 R2 server running Active Directory services to manage logon and permissions for file sharing.
2) 15 same workstations, with their same user profiles.

So I joined the 2008 R2 server to the domain, and then used the dcpromo tool to make it a domain controller.

Problem is, whenever I take the old server offline, (the 2003 one) everything flips out, logons are slow, and the 2008 server gives people trying to access shared files weird errors like that the server that authenticated them cannot be contacted, and asks them to log in again with their username and password before accessing shared files on the server.

What did I do wrong? I must be forgetting something.
 

A:Replacing a Windows 2003 AD DS server with a 2008 R2 AD DS server

1. Transfer all FSMO roles to your 2008 R2 server
2. Uninstall AD on 2003 server
3. You can now permanently take 2003 server offline
 

Read other 13 answers
RELEVANCY SCORE 110.4

I'm currently using windows 2008 server, I want to move my Sever to Windows server 2012. Can you suggest me the easiest method for <g class="gr_ gr_146 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del multiReplace"
data-gr-id="146" id="146">doign</g> this, It's running on Cloud as RDP <g class="gr_ gr_246 gr-alert gr_tiny gr_spell gr_inline_cards gr_run_anim ContextualSpelling multiReplace" data-gr-id="246" id="246">i</g>
don't want to change any network settings also <g class="gr_ gr_329 gr-alert gr_tiny gr_spell gr_inline_cards gr_run_anim ContextualSpelling multiReplace" data-gr-id="329" id="329">i</g> want the login IP to look like
192.168.1.1:<g class="gr_ gr_477 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del multiReplace" data-gr-id="477" id="477">xxxx</g> instead of random IP4 Address any method for doing this?

Read other answers
RELEVANCY SCORE 107.2

Hello!
1) Suppose there are two user-defined data-collector sets: SQL and SQL-MEMORY. If I use

logman start/stop SQL or logman start/stop SQL_MEMORY
- both commands succeed.
2) If I export, for example, SQL data collector set to the xml file, delete the SQL from Performance Monitor, import it back by 
logman import SQL -xml C:\Distr\SQLServer2019\COUNTERS\SQL.xml

and try to start using the same command  (logman start/stop SQL ) the following error arises:

The same error arises when starting SQL in GUI.
This error does NOT arise if the SQL data collector set (its xml file) is imported manually!

It means no data collector sets can be started after being imported by
logman import command ... why???


Regards,
Michael

Read other answers
RELEVANCY SCORE 103.6

Hi All,

I am planning to buy Dell Precision 650/670 with approximately the following configuration:

DELL PRECISON 650
Intel Processor XEON 2.8GHZx2 (Dual)
Intel Motherboard 7505 CHIPSET
2 GB ECC DDR1 RAM
Supported Interfaces : IDE/SATA/SCSI
Harddisk: Optional
Optical : Optional
AGP Graphic Card
300 Watt POWER SUPPLY

I plan to run a server application on these machines, on either Windows 2003 or 2008 Enterprise Server.

I have searched the dell.com website and cannot find any drivers for these models for Windows 2003/2008 operating system.

So I just want to know that are there any working drivers (for all the system components) available for these models for Windows 2003/2008 operating system.

Has anyone been using these systems in a similar setup/environment.

Please share the drivers/links any other performance considerations necessary.

Thanks for your help and guidance.
 

A:Windows 2003/2008 Server Drivers for Dell Precision 650/670

http://downloadcenter.intel.com/Sea...+Chipsets&ProductProduct=Intel®+E7505+Chipset

http://www.intel.com/p/en_US/support/highlights/chpsts/e7505
is this correct??
 

Read other 2 answers
RELEVANCY SCORE 102.8

Hi,
I would like to know how to configure a Windows Server that will host a windows Diskless Client, I've read a lot of forums and blogs regarding this subject and I even tried to applied those summarized guide but until now I'm still stuck, and I hope someone
in this forum can help me or give me a detailed guide to this particular subject. I would really appreciate whatever suggestion or support that may give to me. 

Thank you,

Read other answers
RELEVANCY SCORE 100

I have a file server at home with a Quad core, 4gb ram, and a 3tb of storage. It is running Ubuntu Desktop and sharing video files primarily. From my school I have access to a free copy of Windows Server 2008 R2. Other than the server I have 2 Windows 7 desktops, 1 Windows 7 laptop and 1 Windows Vista laptop.

I am interested in moving to a Windows setup as I am done with the ?Ubuntu? experiment. WHS looks like what I need, but I have a free copy of WS 2008 and I would miss the $50 for WHS. My goals can be described best as:

Need to Haves:
? File/media server (local network)
? Dedicated game server for various games for friends.
? Print server

Nice to Haves:
? Music/Video Streaming over the internet
? Automatic backup server
? File server over the internet
? Ability to manager other PC?s from the server

My ability as an admin:
? No experience
? Willing to learn and put forth initial effort to get setup
? Don?t have time to really spend more than 1 day moving from Ubuntu to the new setup.
? Don?t want to be stuck constantly screwing with things to get it right or keep it running.

What is going to be best option for my situation?

A:Help choose: Windows Home Server 2011 vs. Windows Server 2008 R2

Honestly, I use both in their proper settings, and unless you have a domain at home with multiple users, Windows Server 2008 R2 is overkill...and would require much more tweaking and add-in apps to do what you want. Given your write-up, WHS 2011 is the way to go. It does much of what you want out of the box, and is designed for people who don't want to become server admins (or at least not be forced to).

Read other 2 answers
RELEVANCY SCORE 100

The following Structure is a representation;
PC1 - IP 10.0.0.10 - FQDN PC1.DOM.LOCAL
PC2 - IP 10.0.0.20 - FQDN PC2.DOM.LOCAL
SRV1 - IP 10.0.0.5 - FQDN SRV1.DOM.LOCAL - File Share 'FLDR1' / USR1<ReadOnly>


SRV1 has a folder, FLDR1, being shared for read only access to user USR1.

PC1 and PC2 logged on as Domain User USR1.
PC1 is able to connect to SRV1 to see and look in FLDR1.
PC2 is unable to connect to SRV1 to see and look in FLDR1.
Now there are multiple means of connecting to SRV1 to see the share FLDR1.


The following connections were done in combination with the following methods;
Method 1 - via logged on Domain User CMD Prompt with 'NET VIEW'.
Method 2 - via logged on Domain Administrator CMD Prompt with 'NET VIEW'.
Method 3 - via logged on Domain User Explorer Window.
Method 4 - via logged on Domain Administrator Explorer Window.

Connection 1 - via Server Name.
Connection 2 - via Server IP Address.
Connection 3 - via Server Fully Qualified Domain Name.


Now that the stage is set, going to the fun part...

Testing from both PC1 and PC2...
-------------------------------------------
PC1 : Method 1 - Connection 1 - Success
PC1 : Method 1 - Connection 2 - Success
PC1 : Method 1 - Connection 3 - Success
PC1 : Method 2 - Connection 1 - Success
PC1 : Method 2 - Connection 2 - Success
PC1 : Method 2 - Connection 3 - Success
PC1 : Method 3 - Connection 1 - Success
PC1 : Method 3 - Connection 2 - Success
PC1 : Method 3 - Connection... Read more

Read other answers
RELEVANCY SCORE 100

I have 2 servers; windows 2000 & windows 2008, I can always access them via XP but my system 7 home can't authenticate. It appears to add the domain name as a preamble my user name in the authentication....does this make sense?


thank
-Jeff

Read other answers
RELEVANCY SCORE 99.6

We have a requirement to get the windows services from one of our remote server. We already have a group with admin rights on that machine and users added to it. But while fetching the services from that details we get below error.
We are using C#.net to fetch the services.
Error:
InvalidOperationException Was caught
Cannot open Service Control Manager on computer :"". This operation might require other privileges.

Read other answers
RELEVANCY SCORE 99.6

Hi Experts,
Could someone please help me how to copy file from Windows 2012 server to Linux using rsync.

Read other answers
RELEVANCY SCORE 99.2

Hi, I am going to install windows 2008 server on the IBM server x3650 7979 and couldn't get the supportive RAID Serv as the I am currently got the IBM ServerGuide Setup and Installation CD version 7.4.17 for adaptec RAID controller 8K but it does not have windows 2008 server option. Do assist me in this regard. thanks
 

Read other answers
RELEVANCY SCORE 98.8

Hi,

I have a set of 5 machines - 2 desktops (one being a thin client and the other to function as a 'server' ) and 3 notebooks. I was wondering what was the difference b/w the 2 versions Windows Server 2003 and Windows Small Business Server 2003. Is it true one cannot use a thin client but need a regular cpu setup to use Small Business Server 2003 ?

There is a difference in costs and since i have windows 2000 on the desktops and xp on the notebooks wondered if i needed to shell out so much more $$ for the Windows Server 2003 . I plan to put in a wireless networking system to link all the 5 machines.

Thanks in advance for any and all advise.

S
 

A:Solved: Difference b/w Windows Server 2003 and Small Business Server 2003

ok i got the answer to this from another source.
 

Read other 1 answers
RELEVANCY SCORE 98.8

Hi,

I have a set of 5 machines - 2 desktops (one being a thin client and the other to function as a 'server' ) and 3 notebooks. I was wondering what was the difference b/w the 2 versions Windows Server 2003 and Windows Small Business Server 2003. Is it true one cannot use a thin client but need a regular cpu setup to use Small Business Server 2003 ?

There is a difference in costs and since i have windows 2000 on the desktops and xp on the notebooks wondered if i needed to shell out so much more $$ for the Windows Server 2003 . I plan to put in a wireless networking system to link all the 5 machines.

Thanks in advance for any and all advise.

S
 

A:Solved: Difference b/w Windows Server 2003 and Small Business Server 2003

Windows Server 2003 for Small Business Server has the following restrictions:
- Only one computer in a domain can be running Windows Server 2003 for Small Business Server.
- Windows Server 2003 for Small Business Server must be the root of the Active Directory® forest.
- Windows Server 2003 for Small Business Server cannot trust any other domains.
- A Windows Server 2003 for Small Business Server domain cannot have any child domains.
- Each additional server must have a Windows Small Business Server 2003 client access license (CAL). You can use CALs for each user or for each device.
The standard edition of Windows Small Business Server 2003 includes Windows Server 2003 technologies, including fax service, firewall service, and remote-access service. Additionally, it includes Microsoft Exchange Server 2003, enhanced tools for server monitoring and administration, and an out-of-the-box solution for internal Web sites. The standard edition is ideal for customers who do not require the higher-level functionality included in the premium edition

The premium edition includes everything in the standard edition, plus Microsoft SQL Server 2000, Microsoft Internet Security and Acceleration (ISA) Server 2000, and Microsoft FrontPage® 2003. The premium edition is ideal for small businesses with more demanding IT needs, such as data-intensive line-of-business applications, or advanced firewall and Web-caching capabilities

The standard edition has most of the stuffs inside.
 

Read other 2 answers
RELEVANCY SCORE 98.4

Hi guys,
 
What free Antivirus software for servers?
What free anti-malware would NOT be a good idea?
 
Info:
My friend has purchased a Poweredge server to act as a fileserver for a private network not connected to the internet..  He uses 2 laptops at the most  to access files on the server.
 
However at some points he will update Windows Server 2008 plus odd bits by temporaily hooking up to the Internet., and obviously leave himself open to malware etc. for a short time.
 
The cost of server Antivirus is very high and usually effective for 10 workstations upwards, and obviously he would appreciate keeping costs down.
 
 
Questions:
I would appreciate thoughts on ideas for avoiding a costly solution.
 
Also, if he got Malware on it (e.g. Rootkit or Delta) would current Bleeping Computer tools (e.g. Rkill, RogueKiller etc) still work on the server - or does it require another approach? 
 
I am asking fior advice BEFORE he gets started while options are open.
 
 
Thanks in advance guys
 
 
 
 
 

A:Free Server Antivirus ? e.g. for Windows Server 2008

The answer is fairly simple. Just read the details on the site -
Microsoft Security Essentials is available for small businesses with up to 10 PCs.
 
• Microsoft Security Essentials:
Microsoft updated it’s free Anti-Virus solution at the end of 2010 to support Windows 2008/R2.
This is easily one of the better free offerings as Microsoft has updated this solution to complete directly with some of the biggest solutions, such as Mcafee and Symantec paid versions.

When downloading, simply choose Windows Vista / Windows 7, as Microsoft has yet to update the website.http://www.microsoft.com/security_essentials/
 
Regards -

Read other 6 answers
RELEVANCY SCORE 98.4

As my final project for the year i am setting up a server that we will eventually move all our computers on to. I am using a poweredge 2900 as a server with windows server 2008 installed. As of now i have 2 computers connected to the domain which they can log on to.

- what i need help with
- How do i give all users access to programs?
- Each student needs to have access to her own drive through the server not locally.
The client computers are connected to a switch using dhcp.
Any help would be greatly appreciated.

A:setting up a server for school help (windows server 2008)

I'm quite sure your instructor/teacher did not intend for anybody but you to do the final project for the year and nobody else.

Read other 9 answers
RELEVANCY SCORE 96.4

I'm trying to decide between Windows Home Server and Windows Server 2008 R2 for my home server PC. Ordinarily it would be a clear cut choice, but I've got a free copy of Server 2008 R2 through my academic MSDN subscription. I'd like to avoid spending extra money if Server 2008 R2 would do the job. But I'm willing to buy Home Server should it prove necesary. Any input is appreciated. Thanks.

A:Windows home server vs Server 2008 R2

Server 2008 R2 is a more fully functional product. You will be able to do similar things, but it might be a little more involved getting it set up and working. Plus, if you are interested in IT, you could use the Server 2008 R2 experience....but you won't get hired for your knowledge on Windows Home Server.

My vote is Server 2008 R2 without a doubt.

Read other 9 answers
RELEVANCY SCORE 96.4

Hi all
Have been a LONG LONG user of Linux as a server (hosting VM's XP / W7 mix) and file / print sharing.

I used to avoid MS like the plague as far as SERVER environments are concerned - probably because my first experince was Windows NT (Windows NeanderThal or Windows No Thanks) which was SO HORRIBLE that it put me off Windows servers for ages.

(Note I'm using a server in a HOME environment where we have around 8 machines (most of which are actually mine for testing -- not a corporate environment which has other considerations).

The problem now with the latest Linux distros that they are trying to be "A Better Windows than Windows". You can of course customize them but I haven't got the time or patience to do this any more. To select what packages to install / leave out now is a 100% pain and if you do it wrong the chances are the system will give errors.

I've looked at the new SUSE 11.2 -- slick and polished - bit I don't NEED "an alternative Windows".

I've just been looking at Windows Server 2008 R2 (got it from Technet) and I'm REALLY IMPRESSED with it so far. I've installed the STANDARD version - you don't need datacenter or Enterprise version for a home server.

It runs vmware server on it just fine (although I might go the whole hog and use the Hyper-V virtualisation -- need to do a bit more research).

I'm quite happy letting MS do the updates than having to mess around with Kernel compiles etc.

Incidentally as a HOME server there ... Read more

A:Windows 2008 Server or Linux for server

Windows servers have come a very long way in the last few years, I will never use a linux server ever again.

Read other 9 answers
RELEVANCY SCORE 94.8

Hiya

The Windows Server 2003 Statement of Support (SOS) for Microsoft Project Server 2002 lists detailed instructions for configuring Microsoft Project Server 2002 on Windows Server 2003. The SOS lists the steps IT admins must take after setup on both a clean installation of Windows Server 2003 and on upgraded installations.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Project Server 2002
Microsoft Office (download is Microsoft Word file)
http://www.microsoft.com/downloads/...eb-721f-464e-98eb-67029ee81a1f&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 94.8

Hiya

Emergency Management Services is a new feature in Microsoft Windows Server 2003 that supports remote management and system recovery for servers that are not accessible through a conventional connection. By using Emergency Management Services with other software and hardware components, you can remotely perform tasks such as recovering unresponsive servers and powering servers off and on, even when they are not accessible through a standard network connection. Emergency management services also supports headless servers—those without a local keyboard, monitor, or mouse. This document provides an overview of Emergency Management Services and its components. It explains how to choose and configure hardware and software that supports Emergency Management Services. It provides guidance for enabling Emergency Management Services, and information about using this technology to troubleshoot problems with remote servers.
System Requirements
Supported Operating Systems: Windows Server 2003

Only servers running a Windows Server 2003 operating system can be monitored using Emergency Management Services. For additional hardware and software requirements, please consult the chapter.

http://www.microsoft.com/downloads/...a6-97d2-448c-a0dd-4cfaa0be7d14&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 94.8

Hiya

By adding an additional server to your Microsoft® Windows® Small Business Server 2003 network, you can enable Terminal Server. Using Terminal Server, you can host your users' desktops. This can save your organization money by allowing you to extend the life of your desktop hardware.
After you have installed Windows Small Business Server 2003 and have completed the To Do List, you can join an additional server to your network and configure it as a terminal server.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word or Word Viewer
http://www.microsoft.com/downloads/...45-57ef-43eb-802f-f274fd937400&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 94.8

i am having microsoft windows server 2003 for small business server Service Pack 1.iwant to run an application build up with ASP.NET & SQL DATABASE.for generating reports we are using crystal reports.
while running the application i am gettig an error message as

File or assembly name CrystalDecisions.Web, or one of its dependencies, was not found.

i tried to copy all the dll files in to the bin folder.still the problem is not solved..
Source Error:
Line 13: debugging ASP.NET files.
Line 14: -->
Line 15: <compilation defaultLanguage="c#" debug="true"><assemblies><add assembly="CrystalDecisions.CrystalReports.Engine, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.ReportSource, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Shared, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Web, Version=9.1.5000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></assemblies></compilation>
Line 16:
Line 17: <!-- CUSTOM ERROR MESSAGES
Source File: C:\Inetpub\wwwroot\HomagIndiaCIS\web.config Line: 15

Assembly Load Trace: The following information can be helpful to determine why the assembly 'CrystalDecisions.Web' could not be loaded.
=== Pre-bind state information ===
LOG: DisplayName = ... Read more

Read other answers
RELEVANCY SCORE 94.8

Hiya

The Windows Server 2003 Statement of Support (SOS) for Microsoft Project Server 2002 lists detailed instructions for configuring Microsoft Project Server 2002 on Windows Server 2003. The SOS lists the steps IT admins must take after setup on both a clean installation of Windows Server 2003 and on upgraded installations.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Project Server 2002
Microsoft Office (download is Microsoft Word file)
http://www.microsoft.com/downloads/...eb-721f-464e-98eb-67029ee81a1f&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 94.8

Okay what are the steps needed to make the new Windows 2003 server take over all roles that the old 2003 server had? Here is the scenario. I have 1 2003 server this was really only a glorified desktop but it served its purpose. It was the only Server on the domain in a single domain/single site scenario. I now have had a second 2003 server built And I have it added into the domain. I setup all the same functions DNS Server, Domain Controller - Active Directory, File server and print server.

With Server 1 turned off and Server 2's IP changed to the IP of Server 1 the clients are pulling DNS from the PC's in the domain do work fine I.E. log in fine authenticate have full control over the shares they should, have internet browing.

The problem is that Server 2 (only when Server 1 is turned off) is not able to populate all the active directory objects (I mean it shows the item but it is greyed out and gives some errors about a Global Catalog Server not being available). Why am I geting this if both PC's are setup as Active Directory domain controllers?

Please explain this and let me know what else I have to ensure to do before pulling off this original Windows 2003 server so far I have the following done -

Shares from Server 1 recreated on Server 2 - Check
Server 2 is now configured as the DNS Server and functioning just fine - Check
Server 2 has print ques recreated and everyone is printed to it just fine -check
Server 2 is showing all the AD items from Server ... Read more

A:Added ones Windows 2003 Server want to remove old 2003 server.

This sounds tricky alright. I did the MCSE exams on AD and Windows 2000 server etc, from what I can remember there is only one Global Catalog server in the network. So I assume that when you set up the first server it assumed this role for the network. BUT when you add the second server this finds that there is already a Global Catalog server and does not assume this role itself.

http://www.microsoft.com/resources/...03/all/techref/en-us/W2K3TR_Ad_dctrl_over.asp
"The first domain controller in a forest is automatically created as a global catalog server. Thereafter, you can designate other domain controllers to be global catalog servers if they are needed."

I would try to promote your 2nd server to a Global Catlog server and see if this resolves the issues.

regards,
J
 

Read other 2 answers
RELEVANCY SCORE 94.8

Currently we are on an NT network with a few 2000 servers tossed in. Today I learned that the plan is to migrate everything to Linux. Lets assume that this only applies to the servers and that the users will still operate with 98/nt/2000/xp. What are your thoughts on this?

I put this in this forum for a reason. Because I'd rather get the advice from 2000 and 2003 experts who know what Linux cannot replace than to hear the Linux fanboys and anti-Microsoft activists praise it to the high heavens.

What would your concerns be if this was done on your network? What problems have you encountered if you'd tried this? Or what successes? Know of any businesses that have done this successfully?
 

A:Is Linux ready to replace Windows 2000 server and 2003 server?

Read other 9 answers
RELEVANCY SCORE 94.8

Just bought 2 new Intel S5000VSA server boards, After building both Pcs using the Intel disc that came with board and even the win 2003 setup disc directly I cant seem to install windows server 2003 without receiving a BSOD during setup. All Hardware is compliant with the board. Please Help
 

A:Cant install Windows Server 2003 on Intel s5000vsa server board

Strip the system down. One memory stick, no USB devices, on-board video and sound, no sound card and try the OS install again. Reset the bios to failsafe defaults
 

Read other 2 answers
RELEVANCY SCORE 94.8

Hiya

Proxy Server 2.0 is not compatible with computers running Windows Server 2003. The Proxy Server client is compatible with computers running Windows Server 2003.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Proxy Server 2.0
http://www.microsoft.com/downloads/...f7-b55c-4acd-8167-1923402a9703&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 94.4

I have a print server running 2003 standard sp2, I have been looking for a way to allow helpdesk staff install and manage printers without logging into the server and without adding them to the admin group.

So I added them to the power users group and the print operators group, that worked fine they were able to UNC ( \\servername ) to the server and install printers, drivers, as well as uninstall drivers? printers ect????.
Now the problem??? this works great from an XP box, but when we try it from a windows 7 machine we get access denied. More specifically it acts like it is going to install the printer then when it comes to the driver installation part it fails ?Printer driver was not installed. Access is denied.?

No changes have been made to the permissions I can log into an XP machine with my profile and it works fine log out go to a Windows 7 machine use the same credentials and I get the above message access is denied. I am an admin of both machines on the windows 7 machine I have UAC turned off completely. Running XP Pro SP3 & Windows 7 pro both are 32 bit machines.

I should also add that I have made the necessary group policy changes to allow printer operators to Load/Unload device drivers and under the local policies/security options I ensured that the Prevent users from installing printer drivers was Disabled.

Any help would be much appreciated.

Thanks

A:Windows 7 & 2003 Server Standard SP2 Unable to remotely install driver on print server

How do you enter the credentials on the Windows 7 machine? I've noticed that you have to use "domain\username" rather than just the username in some cases.

Read other 3 answers
RELEVANCY SCORE 94.4

Hiya

Microsoft Windows Terminal Server lets users run Windows®-based applications on a remote computer running one of the Windows Server 2003 family of operating systems. This white paper contains testing methodologies, results, analysis, and sizing guidelines for Windows Server 2003 Terminal Server. Hewlett Packard working in cooperation with Microsoft to perform the initial sizing tests and data collection in HP labs. Microsoft performed the final round of testing and analysis collection using Hewlett Packard equipment. The tests were performed using Windows Server 2003, Enterprise Edition, build 3790.
System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Word
http://www.microsoft.com/downloads/...63-7c42-4372-ab37-d8c8987a71da&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 94.4

Setup Is Comcast(DNS/ISP/Phone)->D... Computer Connected --> Server(AD/DNS/DHCP/RRAS)F... Server --> Switch --> WIndows Xp And Sever 2003 As Work Station. Problem Is Trying To Install VNC On All Computers Behind The Primary Server 2003. Need To Forward Ports Through Server 2003 to Dlink For Query to Internet: Thanks In Advance
 

Read other answers
RELEVANCY SCORE 94.4

hi guys!
I just installed Windows 2000 Advance Server recently to a Compaq Proliant ML530 server and found out that the license for this server is more expensive than Windows Server 2003 Standard. The SmartStart CD of the compaq does not support windows server 2003 and I don't want to manually re-configure everything and start all over again. Does Win2K A.S. support Windows Server 2003 upgrade?
 

Read other answers
RELEVANCY SCORE 94.4

Hiya

The Windows Server 2003 Statement of Support (SOS) for Microsoft Internet Security and Acceleration (ISA) Server 2000 lists the steps necessary for ISA Server to function properly on computers running Windows Server 2003. It includes information that an administrator needs to know for setup on both a clean installation of Windows Server 2003 and installations upgraded from the Windows 2000 Server family.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Internet Security and Acceleration Server 2000
Microsoft Internet Security and Acceleration Server 2000 Service Pack 1

http://www.microsoft.com/downloads/...48-8a4b-450e-bd03-1ed3d5e359da&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 94.4

Setup Is Comcast(DNS/ISP/Phone)->D... Computer Connected --> Server(AD/DNS/DHCP/RRAS)F... Server --> Switch --> WIndows Xp And Sever 2003 As Work Station. Problem Is Trying To Install VNC On All Computers Behind The Primary Server 2003. Need To Forward Ports Through Server 2003 to Dlink For Query to Internet: Thanks In Advance
 

Read other answers
RELEVANCY SCORE 93.2

Hi,

I am not able to connect to OPC server for non admin user in windows server 2003.

I get Runtime error '-536608665(e0040067)':
Failed to connect OPC server.
The system returned the following error message:
Access is denied

But i can connect non admin user to opc server in Windows xp

Is it possible for non admin user to connect OPC server in windows server 2003?

OPC server and client are on same system

Please give me your feedback

Thanks!
Santosh

A:Non Admin not able to connect OPC server in Windows Server 2003

From what I've read on this thread, you'll need to set computer-wide DCOM security permissions. You'll want to peruse that thread.

On another note, this isn't really the best spot for this question. An error message isn't a crash, hang or bsod, and the situation is more relevant to specifically the Windows Server section (even though OPC servers can and often do exist in many client versions of Windows). You'll be able to receive more help there, as it's pertinent to your needs.

Read other 4 answers
RELEVANCY SCORE 93.2

Ok so i need to set up windows 2003 server edition as a vpn server so someone can connect to it from home or from his work! Does anyone have any advice i have been trying but nothing seems to allow me to get connected!
 

Read other answers
RELEVANCY SCORE 93.2

Hey all,

I'm inexperienced with Windows Server 2008 and am setting up a "lab" or test server here at the company I work for's network.

In the intial configuration process, when setting up the Active Direct Domain Services, I'm stuck at the DNS server

Questions are...

-Do I install it?
-Will this interfer/mess up things with our main file server?

Sorry, a bit amateur with this stuff

Any help is appreciated
 

A:Windows Server 2008 - DNS Server..?

Bump...

Anyone?

Thanks
 

Read other 3 answers
RELEVANCY SCORE 92.8

Hi, Can any1 help me i have did upgrade Windows 2000 Ent. Server (SP4) to Windows 2003 Ent. Server, but after rebooting the machine all of sudden BLUE screen appears with mentioning below error though OS working in safe mode. Please help me out to resolve the issue ASAP.
Driver_IRQL_NOT LESS OR EQUAL

Then at the end it says
Beginning dump of physical memory

HYDIS.sys address 7505AF5 base at F74E9000
Stop: 0x000000D1 (0xf3bbf000, 0x00000002, 0x00000001, 0xF7505AF5)

Physical memory dumb.
Contact your system administrator or technical support group
BR,

Sharjeel
 

Read other answers
RELEVANCY SCORE 91.6

We have a Windows 7 Pro laptop that can't see any of the 300 or so Windows XP and Windows Server 2003 Machines.

It can, however, see all (around 13) Windows Server 2008 and Windows 7 Machines that are on the network. Using \\ServerName\Share doesn't connect, and they don't show up on the network map.

It can ping the servers though. They ping by hostname and by ip address. Other Windows 7 Pro Laptops don't have this same problem!

Additional Info:
They are all joined to the domain; servers, laptaps, etc.

A:Windows 7 Computer can't see Server 2003 Server

My problem is when i join in 2003 domain server i get the msag

"An attempat to resolve the DNS name of a domain controller in the domain being joined has failed.
Please verf=ify this client is configured to reach a DNS server that can resolve DNS names name in
the target domain. for information about network troubleshooting, see windows help "

tell me what i have to do! 10Q

Read other 1 answers
RELEVANCY SCORE 91.6

Hi all ,

This is my first post on this website , i hop i can find some one to help me .
The problem is i installed windows 2003 server on my computer and i don't know how can setup ftp server and web server on it ? i create the domain but i faild to do the rest . I have MCSE 2000 but i feel i don't take anything , I am looking for any help like pdf file or book can i buy .
also the register.com ask me for dns server on my home page , is it the dns ip address comes with my ip static address or not ?

Thanks for help !!!
 

A:SETUP FTP & WEB SERVER ON WINDOWS 2003 SERVER ...HOW ?

Control panel. add/remove programs, on the left add/remove windows components, application server, iis. Click on details of iis for ftp.
 

Read other 1 answers
RELEVANCY SCORE 90.8

Logon to Outlook Web Access takes long!!
I have just setup Microsoft windows 2003 and Exchange 2003. the problem i have is when i try to logon on Outlook Web Access on the internet the logon windows appears fine, but it's taking long time to logon.
 

Read other answers
RELEVANCY SCORE 89.2

Well we're finally upgrading our server from Windows NT to Windows 2003. Is there any way to import/export all of my data onto the new server? Or should I just share everything I have on NT and then just copy/cut all the information and paste it onto 2003? I'm just trying to figure out what will be the easiest way to move everything since I have about 700 users on NT lol. I really don't want to type all the names in again on 2003....Thanks in advance! :approve:
 

A:Moving from Windows Server NT to Windows Server 2003

Are you getting a new server with 2003 on it or just upgrading the existing box to 2003?

If it's upgrading the existing server, start here:
http://www.microsoft.com/windowsserver2003/upgrading/nt4/tooldocs/default.mspx
 

Read other 4 answers
RELEVANCY SCORE 89.2

The above 2 updates keep coming to my Windows Update but when I install the (2) KB's it says download not installed "Try again" and in History "Install Fail". Please help me, sooo frustrated at this point, usually don't have
issues

Ruth M. Stauffer

Read other answers
RELEVANCY SCORE 88.4

   Dear Team
       I have windows 2012 R2 domain server. It is connected domain perfectly windows 7 pro .
      But if i connected domain windows 7 ultimate . It is showing DNS error. I am joining same process win7 pro.
      please help me how to join windows 7 ultimate in domain.

   Note. I give my client PC windows 7 ultimate network proper DNS.

Read other answers
RELEVANCY SCORE 88.4

Hello all, I'm not sure if this is an operating system question or more of a software development question.

Anyway, I have a legacy COM service, a COM server that runs as a windows service, that was written for Windows NT 4.0. I have managed to use the service on both Windows 2000 and Windows XP unchanged. However, I now wish to run the service on a Windows Server 2003 machine and I can't seem to get it to work.

This is what happens:-
1. Install the service and set it to log on using a domain account.
2. Start the service from the services.msc applet.
3. Start the client application and connect to the service.
4. At this stagte the client applicaiton freezes for approximately 60 seconds and then returns with the error message "Server execution failed".

I've also tried using the client whilst the service is stopped. In this case when I connect the service is started but I get the same error.

The development team also provided a standalone application that hosts the exact same COM objects, mainly for debugging purposes. If I use the standalone application everything works fine.

Its all very strange.

Does anyone have any idea what the cause might be? And preferably a solution.

Thanks,
Kep.
 

A:DCOM service on Windows Server 2003 - "Server execution failed" when connecting

I found the answer.

http://msdn.microsoft.com/newsgroup...-DC48AB0DA5C9&dglist=&ptlist=&exp=&sloc=en-us

The above discussion says that a service must enter a running state before a COM server calls CoRergisterClassObject. So I guess its a development problem.

Not sure why it only manifests on Windows Server 2003 though.

Kep.
 

Read other 1 answers
RELEVANCY SCORE 88.4

I am trying to setup my own VPN, I have installed Server 2003 on my server machine. The server machine is connected to my Netgear router which connects to the internet.

I have setup the VPN service and can connect localy using an advanced connection setup in windows XP on my client machine.

Also on my network is a fileserver running windows vista(soon xp or server) the server has over 500gb of storage mostly full t hat i want to share over my VPN. This is also onnected to the netgear router.

My problem is with sharing these files. How do i set the drives on my file server as standard shares for all VPN connected users? I can access them local over the lan but not sure how to share for users dialing into the VPN?

any step by step tutorials links would be welcomed or if anyone can help me it would be brilliant or if somone can get on msn with me and walk me through what im doing wrong that would be awsome too. Thanks alot
 

A:Windows Server 2003 as VPN server

Information for how to configure a Windows2003 VPN server can be found at:
http://www.onecomputerguy.com/networking/w3k_vpn_server.htm

You don't need to make any changes or additions to shares in regards to VPN client's being able to access previous shares on the server. Whatever you have assigned for the LAN access can work for VPN.
 

Read other 1 answers