Over 1 million tech questions and answers.

Wierd dual monitor qlitch that messed up laptop monitor

Q: Wierd dual monitor qlitch that messed up laptop monitor

I had my laptop hooked up to my tv an dead using it as dual monitors. I was listing to Pandora and surfing steam which I'be Done hundreds of times. Then my computer froze up an did turned it off for a bit. I turned it back on and I got a Windows error recovery. I ran start up repair but when it got to the Windows lock screen the login part was completely gone.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Wierd dual monitor qlitch that messed up laptop monitor

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 91.6

I am using a 22" screen for my primary screen and the laptop lid open for a secondary screen. The main screens resolution is 1680x1050, I can set it to anything I want and it's always using the full screen. The laptop screen on the other hand will only use the full screen if it's at 1400x1050 resolution (max for that screen, IBM Thinkpad T43). With the large 22" screen I have no trouble reading the screen at high resolutions, the screen is huge, with the little 14" screen though I have to strain to read the screen at 1400x1050.

The problem is when I set the laptop screen to anything lower than 1400x1050, it uses less of the screen. Preferrably I want it at 1280x1024 or 1024x768 (I dont know which I want yet as I can't see the freaking screen at that resolution). At 1280x1024 for instance the useable screen is just a box in the middle, so the "1280x1024" is still barely readable for me cause it's shrunk from full screen, plus it's just annoying only using a portion of the screen.

I have played with the ATI Control Center, the Thinkpad display settings and windows display settings and just cannot get this thing to go full screen at lower resolutions when docked and using the external monitor.

Anyway to resolve this?
 

Read other answers
RELEVANCY SCORE 83.2

I have HP Desktop Tower Pavilion with windows 10, I had two HP S2031 monitors in dual mode, worked fine. One of them died, I got a good deal on a larger HP 27er monitor.  I hooked it up, they were both working fine ... it was using a default monitor
setting ... and then yesterday the computer downloaded some updates, and in doing so, it downloaded the driver for the HP 27er and installed.  The next thing that happens is the older HP S2031 starts to go dark ... like it is going into sleep mode, and
then it is totally black.  On reboot, it starts up with both monitors working, but within seconds of reboot the HP S2031 goes black again. The HP S2031's buttons do nothing, other than the power button, which turns it off and on, but that is it.  
I have done all troubleshooting, I did not even have them set up to sleep, all settings are at NEVER.  In coming here, I have done all the fixes I can find for similar  that are posted for similar issues, the Windows Key + W... nothing. 
The create new power plan ... nothing.  the device manger>display adapters>disable then enable ... nothing.  and lastly Start>Control Panel>System>Device Manager>display adapter>driver tap>update ... still nothing.  HOW
DO I GET THE HP S2031 MONITOR TO NOT BE IN SLEEP AND HAVE BLACK SCREEN.  I can not figure this out and am not finding any fix.

Read other answers
RELEVANCY SCORE 80.8

hey guys, haven't been here for awhile, need to ask a question!

I have a HP laptop with window's vista, Intel centino duo, wireless.

This morning it was doing it's usual installing important updates, and my monitor goes black for a few seconds and the icon's turn big (as in safe mode big) and awhile later my screen blacks out and goes back to normal, but my icons are all messed up ( i'm a neat freak with my icons) please can someone give me advice, this just started this morning and it's bugging me thanks so much, I appreciate it!
 

Read other answers
RELEVANCY SCORE 78.4

My computer is an HP dv2500 it got knocked over.
About 1/3 of my monitor is white with colored lines
going up and down the screen. Could there be something
that came loose or is my led messed up. The other 2/3s of
the screen are fine. In fact I am using it to send this.

A:laptop monitor messed up

Can you take a picture?

Read other 1 answers
RELEVANCY SCORE 78.4

My friends laptop is broken and im not sure whats wrong with it. The monitor is/has been "broken" for a while now and she just told me. For the moment its hooked up to an external monitor but the laptops monitor is so dark you can barely see and not read anything on it. I first thought it was just the brightness but that didnt help, then i updated the drivers...nothing...its dark even through the startup. It is a Dell Insperon 5150 and it about 2 years old. I was told it didnt slowly fade either, it was just like that day upon startup one day. Thank you in advance.
 

A:Laptop monitor messed up

Read other 7 answers
RELEVANCY SCORE 76

Hi All, Can I connect two monitors to an Acer Aspire X desktop? I know they have one VGA and one HDMI, so can they have dual displays? Thanks.

A:dual monitor support - Acer Aspire X Dual Monitor

Specifically what desktop are you asking about?  Do you have a part number?



Important Links: Global Support Pages | Knowledge Base ArticlesRemember to mark posts that resolved your issue with Accept as Solution. You can even mark multiple posts in a single thread. This will make it easier for others to find the same information. Use the Give Kudos button to offer a thumbs-up for good post content and a pat on the back to the author.

Read other 4 answers
RELEVANCY SCORE 76

I have an HP laptop and I have been running it with dual monitors. I finally decided to upgrade to Windows 7 and after I installed it I noticed that the built in monitor of my laptop looked strange and when I opened the display settings to change the screen resolution and set the external monitor as a separate monitor rather than a mirror I noticed that only one monitor was detected and it was the external one (Generic non-pnp monitor on standard VGA graphics adapter) and the built in monitor does NOT show up at all.

I've tried the detection button, in hopes that the computer would read the built in monitor and I could fix the problem. This did not help. I tried unplugging/replugging the external monitor to no avail. I tried restarting without the external monitor plugged in and it STILL reads the built in monitor as if it is the external one. Is there anyway to fix this? I have not tried re-installing the OS, not yet anyways.

Any suggestions ?
 

A:Monitor Issues - Laptop Reading Built In Monitor as if it were my external monitor.

Only thing I can think of is to disconnnect the external monitor, uninstall any monitors listed and then reboot and hope the computer installs the correct drivers for the laptop monitor.
 

Read other 1 answers
RELEVANCY SCORE 73.6

I'm using a T430s and a mini dock plus series 3. This is the dock with the dual DVI, dual DisplayPort, 1x VGA. I do not use the laptop's built-in screen; just the 2 external monitors. Intel HD4000 graphic chip and Nvidia Optimus/ I previously had 2 20" monitors with a 1680x1050 resolution using DVI-to-DVI. They both worked fine. I upgraded to 2 24" monitors with a 1920x1200 resolution. The laptop is not recognizing the second monitor. I have tried:dual display port (dock side) to mini display port (monitor side): only 1 monitor recognizeddual dvi (dock side) to HDMI (monitor side): only 1 monitor recognizedI ruled out monitor and cable problems by swapping...each by itself works fine. Looking up specs, I believe this resolution should be supported by DP or DVI. Can anybody confirm that this is a supported config? Any ideas what is wrong? UPDATE - I did try 1 DP/mDP and 1 DVI/HDMI: this does work. However, its not an ideal solution because it would interfere with the monitors ports which I want to use for a second PC. UPDATE 2 - OK, now I am beyond aggrivated. I also have a support ticket w/ Lenovo where they suggested switching to Integrated Graphics only in the BIOS. I tried that, no luck. After changing that setting back, i tried to get my 1 DP / 1 DVI working, but now it would not recognize dual monitors. ??? After some testing, I'm finding that the -only- setup that works is the following: Dock DVI port 1 to Moni... Read more

A:Second monitor not detected: T430s with Mini Dock Plus Series 3 dual external monitor

Fixed; was a driver issue. Problem seems exclusive to a Dell u2415 on DP port 1 only of the dock or to the laptop's DP port (at least for the couple monitors I tried). It's possible it could affect other monitors. My starting point: 9.18.13.4535 / 9.17.10.2843 (Nvidia /  Intel) The latest driver from Lenovo is 9.18.13.4535 / 8.15.10.2725. I'm not sure how i have a slightly newer Intel, but that's what it was. I couldn't install the Lenovo driver. I also couldn't install a newer driver from Intel (10.18.10.4276). In both cases Windows or the Intel installer stopped me saying the mfr provided the drivers and that the installed version was up to date. I worked around by first rolling back the Intel driver. The manual (.zip) install of the latest intel driver worked. This immediately fixed the Dell u2415 on DP port 1 and laptop's built-in DP port.

Read other 3 answers
RELEVANCY SCORE 73.6

Hi.

I recently got a monitor from one of my friends saying that it was broken. Its a Dell 19in LCD. I have my main monitor a 22in Samsung wide screen So i just plugged it into the second DVI slot on my graphics Card. When i went into the display config i set up dual monitors just to see if it was working. The dell monitor would blink up then quit on me.

When i was messing with the Display settings I made the Dell. Not my Samsung the Default Monitor. I unpluged the broken Dell and restarted. Now my computer regognizes the Samsung as the second monitor and it just shuts it off and recognizes nothing as the main.

I managed to get it into safe mode and it recognized the samsung but every time i try go back to Normal Start the screen is blank.

How can i get it to recognize the Samsung as my main?
 

A:Computer is stuck in dual monitor mode and will not display my Samsung monitor

You might try reinstalling your cards video drivers
 

Read other 2 answers
RELEVANCY SCORE 73.6

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Enterprise, 64 bit
Processor: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 4
RAM: 8129 Mb
Graphics Card: AMD Radeon R9 200 Series, -1 Mb
Hard Drives: C: 232 GB (21 GB Free); D: 931 GB (395 GB Free); E: 698 GB (152 GB Free);
Motherboard: ASUSTeK COMPUTER INC., Z87-PRO
Antivirus: Windows Defender, Disabled (360 Security)

First post, hope I am not necro'ing anyone's thread.

The Issue: Dual monitors, secondary stays in D-VID Power Saving Mode and goes to black and flashes the standby light.

Monitor Model: LG 24'' IPS LED D2343 (CINEMA 3D)

Was working perfectly less than 24 hours ago, upon boot up this issue arose, attempted fixes to follow:

Basic Fixes Attempted:

1. Classic restart.
2. Removed screen connections, power and DVI.
3. Swapped Ports on the actual GPU between main and secondary monitors, main monitor fires up no problem.
4. Used the Monitor and cables with a different PC- The Monitor worked perfectly.
5. Reinstalled GPU Drivers.
6. Cleaned out the tower, dust etc.
7. Checked and re-checked as many settings as possible on W10, everything from Power settings to Display and Device management, this includes trying hot keys- like those used to project screens etc.
8. Checked windows Update- fully updated.
9 No dodgy software detected or any software installed lately.

Intermediate Fixes Attempted:

1. Removed and ... Read more

Read other answers
RELEVANCY SCORE 73.2

Hi, i just moved in to college and set up my computer, but due to limited space didn't bring my second monitor. Now my aim, and ventrilo windows are still on the other monitor but no way to get them to the current monitor for use. Any help?
 

A:Dual monitor to single monior, windows stuck on other monitor

Go into the properties of your graphics card and select Single Display.
 

Read other 2 answers
RELEVANCY SCORE 73.2

Running dual monitors in Win 10 and when going through the Color calibration steps on monitor #2 (Control panel / Display / Calibrate color) the settings stick as long as the 2nd monitor is active.

If I switch to single display (Windows Key + P / PC Screen only) then the 2nd monitor loses its color calibration. Also anytime I reboot my PC (Even if I have both monitors active) the 2nd monitor loses my calibration.

The 2nd monitor has a fairly strong bias for the color Green so I can always tell right away.

I'm probably overlooking something and was hoping someone might of dealt with this before

Read other answers
RELEVANCY SCORE 73.2

I have an ATI Radeon 4670 card. I have not had trouble getting it to "Dual Display" in the past. Usually I wanted to do an extended display. I am now trying to get it set up with my HDTV with HDMI. I have added the Realtech drivers and HDMI adapter to the video card and have been able to get HDMI and digital sound to the HDTV, I am trying to get the two displayed as clones.

The problem I am having is after getting Catalyst to display the HDTV, I have lost the image on the monitor. In the process of trying to get it back to both displays I have accidently made the HDTV an extension of the monitor. Which is really a cluster as I can not get to the control panel to make any changes. All I have is the extension showing on the big TV but none of the controls. I tried rebooting in safe mode but was unable to access the catalyst control center as it did not boot in safe mode. The big plus is that in safe mode both screens are visible, but I can not undo the Catalyst settings. I am now running a system restore which will take me back to tomorrow settings, which is not ideal but better than not being able to access anything outside of safe mode.

How do I get the TV and monitor to display at the same time?
 

Read other answers
RELEVANCY SCORE 73.2

Whenever my computer recovers from sleep mode, or when the screensaver comes on and I wake it up, I find that all my apps are now on my main monitor.

Example: Google Chrome and Skype on Monitor 1.
Microsoft Word and MSI Afterburner on Monitor 2.

-computer sleeps/ screen saver turns on-
-I wake the computer up-

Google Chrome, Skype, Microsoft Word, and MSI Afterburner are on Monitor 1.
Nothing on Monitor 2.

Is it possible to fix this?

Specs
OS: Windows 7 Home Premium
Using DisplayFusion Pro v5.0.1 to extend my taskbar to the second monitor.

GPU: r9 290
CPU: i5 4670k @ 4.2 Ghz
Mobo: ASUS z87 sabertooth TUF series
PSU: Corsair TX-CMPSU 650W

A:After dual monitor sleep recovery, all apps shift to one monitor

I've had dual monitors for years now and have never had this problem. But I also have no screen saver.

If you put your system to sleep why would you want a screen saver? All that does is keep the system active and running - which is the opposite of what sleep does.

Remove the scree saver and see what happens.

Read other 2 answers
RELEVANCY SCORE 73.2

About 6 months ago i invested in a second video card to use with an old monitor and a new PC. After much trial and error i eventually got it all working.

A couple of days ago i re-installed windows however and therefore all my settings have been reset and am now havein problems, and if i remember rightly the same ones as before. But for the life of me i cant figure out how to solve them this time round. So any help would be appreciated.

Spec -

2x plug and play monitor (almost sure it has nothing to do with these so wont add details)

1x Nvidia Geforce FX 5200 (AGP) with fully updated drivers (from manufacturers website) (the monitor off this video card works fine)

1x ATI Radeon 7000 (PCI) fully updated drivers (without catylist command centre however due to some installation problems. I had these before when both monitors worked fine..just the drivers) - Problematic monitor

Bios - Dell Computer Corporation A12 (newly updated) (I heard somewhere that this may have an effect).

The Problem-
On my second monitor (Radeon 7000 (PCI) whenever i try to move a frame, scroll in IE etc the refresh rate is appaling. Entire lines get moved at a time.
The only time the refersh rate does not slow is when moving the mouse and scrolling through files in c drive as far as i can tell. If i switch my primary monitor to this one and stop the monitor 'extension' it still flickers. Ive checked my monitors by changing which card they use and as expected, th... Read more

A:Dual monitor problems- second monitor refresh times dreadful

Well, could be bad drivers... nvidia and ATI hate eachother, so I dunno why you got cards like that, could be a driver conflict from un-updated windows files, that is to say, uninstall drivers, update everything on windows, re-install newest drivers.
 

Read other 3 answers
RELEVANCY SCORE 73.2

Hello I basically need conformation that I'll need to buy a new monitor in order to have a dual monitor set up with my current system. I'm not super tech savvy so if you need any other info please let me know.

I have a Radeon HD 6670 with 3 ports, an HMID, VGA (which is my monitors type) and DVI. Each port has a stamp next to it that indicates what port type it is/supports (the VGA has a CRI stamp next to it though). My main VGA monitor works fine with the VGA/CRI port, but my second I have to use a VGA to DVI adapter and it's not working.

I've gone through a lot of forums, and found some conflicting information. So I really want to know is it possible to use a converter/adapter or will I need to just go out and buy a new monitor that has a DVI hook up?

I hope I don't need a new monitor, I'm on a very tight budget. (la sigh)

A:Radeon HD 6670 Dual Monitor setup not detecting 2nd monitor

I would try one of these before giving up on the monitor:

Rosewill 10ft. DVI-A (24+5) Male to HD15 VGA Male Analog Video Cable w/ Ferrites Cores, Model RCW-900 - Newegg.com

Forget adapters, you might not a have a compatible one, the DVI connector has many variants.

Look at that cable end and make sure it would fit on your video card's female DVI connector (it should), it's DVI-A (analog only) to VGA which is analog only....

More info:

http://www.datapro.net/techinfo/dvi_cables.html

http://www.cableorganizer.com/articl...or-pinout.html

Read other 8 answers
RELEVANCY SCORE 73.2

Hi!
I recently bought a DVI cable to plug my external LG monitor to my laptop to run nVidia's DualView (stretch format) across the two monitors. I'm using a beta driver (169.04 from laptopvideo2go.com), and when I enter nVidia control panel and go into the setup additional monitors tab, it only lets me choose "choose only ONE monitor". So I did that just to test that my monitor was plugged in right, and it worked. So I KNOW that my monitor is working and is being recognized by Vista. But when going into display settings byt right clicking on my desktop, it also only recognizes 1 monitor. Is it my beta display driver messing my Vista up? Or what could it be?
Any help would be greatly appreciated

Thank you
 

A:Solved: Dual monitor in Vista not working. Only showing 1 monitor.

for drivers to work properly in vista i'm pretty sure you have to have signed drivers, since it's beta are you sure they are signed?
 

Read other 3 answers
RELEVANCY SCORE 73.2

I am having troubles getting my dual monitors back.
Initially had a GeForce 8400GS 512MB PCI video card and was using the on board video (Biostar G41 M7 MB) for dual VGA monitor setup.

I've installed a Radeon HD 6670 1GB PCI-E video card with monitor one setup via DVI to VGA adapter on output one and 2nd monitor on VGA onboard video.
I cannot get the second monitor to detect in any configuration. Tried looking in BIOS of MB, using 2nd DVI (w/ vga adapter) on Radeon card.

Am at a loss and I hope I have provided enough information for some assistance.

Much appreciated

Weeg

A:Radeon HD 6670 Dual Monitor setup not detecting 2nd monitor

  
Quote: Originally Posted by Weeg


I am having troubles getting my dual monitors back.
Initially had a GeForce 8400GS 512MB PCI video card and was using the on board video (Biostar G41 M7 MB) for dual VGA monitor setup.

I've installed a Radeon HD 6670 1GB PCI-E video card with monitor one setup via DVI to VGA adapter on output one and 2nd monitor on VGA onboard video.
I cannot get the second monitor to detect in any configuration. Tried looking in BIOS of MB, using 2nd DVI (w/ vga adapter) on Radeon card.


I don't understand why you are using a combination of DVI (to VGA) out of your HD6670 to one monitor, and also using the VGA out of your motherboard to the other monitor.

Am I interpreting what you've done correctly? You are using just the DVI output from your HD6670 through a DVI-to-VGA adapter and on to your first monitor, and also using the VGA output from the onboard graphics of the motherboard to feed the second monitor? If so, this is very wrong.

Your new HD6670 has TWO video outputs of its own: one is DVI, and the other is VGA. You should connect your second analog monitor to the VGA output of the HD6670, not to the onboard graphics VGA output.

Also, if you can disable the onboard graphics in the BIOS that's definitely what you should do when you install an external video card as you've done. At the very least you should give priority to the new PCIe video over PCI (which was your old GeForce card, and probably o... Read more

Read other 2 answers
RELEVANCY SCORE 73.2

I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.

The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has helped.

Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.

A:Dual monitor setup locks 144Hz monitor at 60Hz

Are you sure the other monitors are independent (dual or multiple mode) rather than cloning the main monitor? If they clone the main monitor, then this explains the 60Hz refresh rate, as all settings (resolution, color depth, refresh rate) should be common for all monitors and the others can only do 60Hz.

Read other 8 answers
RELEVANCY SCORE 73.2

I have a laptop with a monitor port in back so i can use both it's LCD and a CRT to display the same stuff. Is there a program that will allow the laptop's own LCD and a CRT to both combine to display one big wide screen?
 

A:Dual Monitor w/ Laptop and CRT

Assuming the correct drivers are loaded, you should be able to do this natively by toggling the Fn+ {whatever key toggles the display mode for your laptop} so both are displaying, under Display in control panel tick the "extend my Windows desktop onto this monitor" box directly under the resolution setting in the "Settings" tab.
 

Read other 3 answers
RELEVANCY SCORE 73.2

I've got an HP Pavilion Laptop and I'm trying to connect my Samsung SyncMater 915N to it. I've got Windows 7 Ultimate 64 bit. I tried plugging my monitor in using a vga cable and pressing windows key-p but the external monitor didn't show anything and said "not optimum resolution". I tried changing settings and I screwed things up because I selected making the not working monitor the primary desktop:dead:

Any help is much appreciated
 

A:Trying to get dual monitor with laptop

I'm using an external monitor with an HP Compaq 6715b laptop.
All I did to get it working was right click desktop, select properties, select settings tab.
External monitor was showing greyed out on the right of the primary. Clicked on it and selected "Extend my Windows desktop onto this monitor". And it worked. Should also be able to adjust the external monitor resolution from here to make sure its in the range required by it. Although I'm using this XP machine just now so the instructions might be slightly different on Windows 7. Will check later when I am at home.
 

Read other 4 answers
RELEVANCY SCORE 73.2

I have a laptop with a monitor port in back so i can use both it's LCD and a CRT to display the same stuff. Is there a program that will allow the laptop's own LCD and a CRT to both combine to display one big wide screen?
 

A:Dual Monitor w/ Laptop and CRT

Read other 9 answers
RELEVANCY SCORE 72.8

just getting my dual monitor setup running, and it seems fine, both monitors running off one ati video card (x1600pro), primary monitor running off of DVI and the second running VGA, PC is running Windows XP Media Center

the problem is the second monitor seems washed out, the colours seem over exposed, or too bright however you want to describe it. The first/primary monitor is perfect. I have the silver theme enabled on WinXP, and by default, the highlighting color is gray, I can hardly see the gray on the second monitor when the background is white because its so washed out

any idea how to get this monitor to look the way its suppose to?

Thanks alot!
 

A:Dual Monitor Problem - Second Monitor washed out, very bright

Read other 8 answers
RELEVANCY SCORE 72.8

First of all, hello! And thanks for your time!

I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.

Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.

Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop.

I don't remember changing/installing anything that could've changed that...

I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display.

I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.

Here are my system specs:

Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G

Thanks!

Djoulz.

A:Dual monitor setup - fullscreen goes on wrong monitor

My desktop has my LCD monitor through Display Port and my TV through DVI. What I do is have my multiple monitors set to "Extend these displays" and make the LCD the primary display. Ive included two pictures of what my settings look like, first is with the LCD(1) selected and the second is the TV(2).

I will say that sometimes the program you are using forces the fullscreen to go to the primary screen, I have had this trouble with Everquest a number of years ago. There was a program that you could run with the game that allowed you to put the game window into boxes, different screens and a bunch of other things.

I primarily use my TV for watching movies/tv, Media Player Classic does a great job of being able to open to fullscreen in either monitor, regardless of how the monitors are setup.

Read other 2 answers
RELEVANCY SCORE 72.8

Here is my problem. I have a primary monitor and then I run S-Video out to the TV so I can watch video clips.

With Vista, I had no trouble starting a video clip in media player on the primary screen and then dragging it over to the second monitor (TV) for actual viewing.
However, I tried to do that with Windows 7-it won't let me drag Media Player over to the second monitor. I can drag other applications to the second Window (Word, Browsers), but not any media program. Even tried another media player application.

Not sure what to do-how can I get this to work? I want to be able to watch TV/Movies on my second monitor.

Jim

A:Dual Monitor Issue-Can't drag MedPlay to Second Monitor

Actually update. I have a hard time dragging anything to my second display. I never had trouble dragging things to my second monitor before. When I get to the right edge of my main display, the window dragging stops..I can't get it to the second monitor. What am I doing wrong?

Read other 2 answers
RELEVANCY SCORE 72.8

i have only one monitor, and somehow it is being treat as though its the secondary monitor in a dual monitor set up.

i cannot view my start menu, or view any programs being opened, as when i try to open them, they presumeably open on the phantom primary monitor.

even when i try to open display settings, i cannot see the box.

i am able to move my mouse to the left border of the screen and move it off into oblivion, and occasionally drag random folders and short cuts over to view.

if anyone can walk me through how to fix this (im not very good with computers, beyond playing games it would be appreciated.

im on my gf's mac right now to write this post, as my pc cant do anything at the moment.

thanks

A:single monitor stuck in dual monitor setting

just wanted to add, when i go into safemode to try to change the settings from there, there is no monitor alternative to choose, and it is stuck in default. ive read here and there, that safe mode is where need to go to change this back to a single monitor, or at least choose your monitor as the primary, but i dont know if there are no options

Read other 19 answers
RELEVANCY SCORE 72.8

Hi,  What was the solution for this issue? I have the same and can't find a solution. Updating the drivers didn't solve it. Thanks,Regards

Read other answers
RELEVANCY SCORE 72.8

I have a dual monitor setup, where the laptop is hooked to a 2nd monitor (TV) thru an HDMI . I primarily use the 2nd monitor. Can I blank screen the 1st (laptop screen) monitor, yet continue to use the 2nd monitor with the lid open for access to the keyboard?(I noticed with changed settings in Win7 control panel, I can close the lid without cutting off [sleep, hibernate or shut-off] the computer and had to reduce the 2nd monitor display to fit the visible screen. But to use the keyboard one has to open the laptop lid, which kicks in the 1st screen)Thank you

Read other answers
RELEVANCY SCORE 72.8

I recently purchased another monitor so I can run dual-monitors on my newly upgraded-to Windows 8 desktop. I set the monitor up last night, and I haven't had any major issues so far... One issue that I've run into, though, is the secondary monitor (regardless whether it's the monitor I owned first or the one I just bought) flashes randomly. Last night, a restart fixed the issue, so I didn't think anything of it. Today when I started it up, it was fine again for about 5-10 minutes. Then it began to flash randomly. It's not a constant steady flash, it only happens once every 3-10 minutes, but it shouldn't be happening. Does anyone else have the same problem and/or have suggestions on how to fix it?

Add'l info:

Monitors (both connected via HDMI, primary to primary gfx card, secondary to secondary gfx card)
1x Asus VW246H 24"
1x Asus VE248H 24"

Both set to 1920x1080p resolution, left as primary, right as secondary.

GFX:
2x EVGA Nvidia GTX 560 Ti's in SLI Configuration

Most recent stable Nvidia drivers are installed. I'll test the beta ones later and update this if anything changes.

Read other answers
RELEVANCY SCORE 72.8

i have GeForce 8400 GS
this VGA Card have 2 output
VGA and DVI

1 Output VGA = going to my SAMSUNG LCD Screen ( Nice )
1 Output DVI ( im using DVI to VGA Adaptor like http://upload.wikimedia.org/wikipedi...DVI_to_VGA.jpg ) = Assus VH192, but isn't work. My ASUS SCreen going to YELLOW

already update driver NVIDIA to latest
but not work
anyone can help me ?

A:Dual Monitor, but Yellow Monitor in Extended Screen

have you update your ASUS monitor display driver?

Read other 9 answers
RELEVANCY SCORE 72.8

I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.

I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.

In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.

When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.

I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"

I have two monitors, both work fine as standalones but Windows will not detect either as a secondary.

Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.

A:Dual monitor issue, secondary monitor is undetectable

Welcome!

Try updating your card drivers. Go into Device Manager and right-click on your display adapter.

I suspect that the cards are too old, though. We will see.

~Jonathan

Read other 8 answers
RELEVANCY SCORE 72.8

I have the 2nd setup through a vga to hdmi cable but it just sits there black with "check signal cable."

2nd monitor is an lg2241

Tried:

- multiple re-boots
- downloaded a driver from LG but don't see that it did any kind of install. Double clicking it's zip file opened it and clicking on the three files did nothing but open gibberish code.
- at screen resolution I see multiple displays and I have it set on extended.
- Clicked detect and identify
- #2 says display device on vga
- tried unplugging and reconnecting the cable (hdmi to vga)

I'm lost. SOS!

lol!

Thx,
Dave

A:Dual monitor setup hdmi to vga on 2nd monitor shows nothing

Dave welcome to the Seven Forums.

That cable won't work unless the VGA port on the computer/laptop supports digital (highly unlikely), as VGA is an analogue signal and HDMI is digital. To get it to work you would need some kind of converter not an adapter, which that cable essentially is.

Assuming this is your monitor,

LG E2241V-BN: 22" Full HD LED LCD Monitor | LG USA

is says it has a VGA port on it. If it does then just use a plain old VGA cable.

Read other 9 answers
RELEVANCY SCORE 72.8

Need help with dual monitor setup. First time trying to do it.

2 Problems
1.
Second monitor does turn on, but is only showing native resolution (1024 x 768) but it has the ability to go up to 1280x1024.
I want to to be able to set it to 1280x1024.

2.
Second monitor will not boot up along with computer.
I shut down my PC, the monitor is still plugged in, and it doesn't wake up automatically.
Things I've tried
- Updating drivers, obviously. (Nvidia, etc.)
- Uninstalling default driver of second monitor in Device Manager then rebooting computer, then plugging out and replugging the monitor back in (so it reinstalls) because it doesn't boot up on its own.
- My Power Options is set to "High Performance" so that's not the reason why my 2nd monitor isn't booting up with my PC.
- I have tried plugging in the VGA cord of my second monitor into the mother board but it didn't come up.
General Information
- The second monitor is an HP Compaq LE1711
- The second monitor is plugged into my GPU? via a VGA cord into an HDMI to VGA Pigtail Adapter (company: ATIVA), into an HDMI port.
- The main monitor (1920x1080) is plugged into my GPU?, via a VGA cord into VGA to DVI-I Dual Link Adapter, into a DVI-I port.

Picture of what I'm seeing:


I'm pretty sure I've got some of the terminology wrong (I'm not a computer expert).

Any help is appreciated!

DXDIAG

DxDiag.txt

Read other answers
RELEVANCY SCORE 72.8

 Have a eliteone 800 g2 with additional hp E240c monitor.Want a setup with dual monitor, but no detection of the E240c.Have followed the installation guidelines from the E240c and connected with the displayport cable on both machines but no additional monitor detected.  Graphics intel hd graphics 530 has factory special driver. Looked if driver should be updated, but no driver was found to update this config specific driver. Who can help me out why it doesn't work. Posted to support team but no respons after 3 days , so hope this forum can help me out.

Read other answers
RELEVANCY SCORE 72.8

I've searched some forums and while i have found all sorts of dual monitor problems i haven't found this one.

I have a MSI M670 laptop ( with nvidia 6100Go graphics card ) and a Samsung SyncMaster T240HD. I always connected my monitor with a VGA cable on my windows xp and everything worked fine.
After i've installed Windows 7 when i connect the monitor to my laptop automatically the laptop monitor is disabled and the Samsung becomes the primary display.
If i press windows_key+P Computer Only is selected and whatever i select from the list ( duplicate, extend, projector only ) nothing happens and Computer Only is always selected.

In the Nvidia panel under the "Set up multiple displays" option after i connect the Samsung it becomes the only option so i cannot revert to my laptop display whatever i do.
Rigurous Display Detection does not help at all.

Any ideas ?

A:dual monitor problem (primary monitor disappears)

Have you been to multiple displays option in nvidia control panel and selected them both?

Read other 2 answers
RELEVANCY SCORE 72.8

Hi,

I'm currently using two 4:3 monitors of my PC, and I'd like to substitute them with one big wide screen monitor. The only thing I'm worry about is that I won't be able to have different "spaces" for my windows that they could expand to (so I could have, for example, my e-mail on the right part, and my browser on the left).

All I've found so far are virtual desktop software, but that's not what I need. I'm looking for something that splits the visible desktop into multiple parts.

Any ideas? I'm using Vista by the way
Appreciate your help
 

A:Solved: Having Dual monitor behavior in a Single monitor?

Read other 7 answers
RELEVANCY SCORE 72.8

Have a large screen tv on wall connected with HDMI to computer. Have a Samsung monitor on my desktop. Cannot make the desktop my primary monitor no matter what I do. (although have had this working before). We had a break-in and monitor was stolen. So replaced with new but cannot make it primary.....always defaults to samsung tv on wall. I have tried all normal solutions.... unplugged all....began with desktop monitor....added tv, etc. Have spent way too many hours and am sure answer is simple. HELP PLEASE!

A:wrong primary monitor in dual monitor setup

Right click on your desktop, select Screen Resolution, then click on the screen you want to make primary. Select Multiple Displays, and it should be there!

Read other 6 answers
RELEVANCY SCORE 72.8

Hi guys! I've been coming across an issue lately and wanted to get some insight as to what exactly is going on. I'm guessing it's the video card, and all my drivers for it are up to date, but I want to make sure.

The first time this happened was on 5/31/2014(see attached screenshot). It's happened a total of 4 times in the past two weeks and always at the same instance. I have a single monitor plugged into my video card(HD 6850) and also have my TV plugged in as well for when I want to watch movies and such. Typically I am running my PC in dual monitor mode(duplicate screens) even when the TV is off but when I turn to TV on these past 4 times, the screen flashes black as normal, but instead of both screens appearing again in tandem the TV is blank and my pc monitor now has a GSOD. I've attached another screenshot as well from 6/4/2014.

It does not happen every time but as I noted it's done this 4 times. As instructed I've also attached my zip file with all the info from DM Log Collector. Let me know if I'm missing anything else that you need. My pc specs are in my profile as well.

A:BSOD when switching from single monitor to dual(monitor + TV)

Bump.

Read other 6 answers
RELEVANCY SCORE 72.4

I apologize if this is the wrong forum, wasn't sure. I have this laptop:

Series 7 15.6" Notebook | Samsung NP700Z5AH

Basically, what I want to do is have a dual monitor setup with my laptop's screen being one screen, and my TV via HDMI out being the other. I want to be streaming something on my TV while still being able to use my computer like normal. How would I go about doing this? Thank you!

A:Dual Monitor Question With Laptop and TV

Have you installed the ATI catalyst application? (you will want it if you plan on doing multiscreen)
If you plug in a second screen (for example your tv via hdmi) it should bring up the multiscreen wizard for you which will aide you in setting it up in a rather self explanatory method.

P.S. make sure you have the laptop on a cooling pad when you are double working it like this. Playing HD video is resource consuming and generates heat.

Read other 5 answers
RELEVANCY SCORE 72.4

I just set up a new HP slimline laptop. Has no VGA or Display Port.
Owner has a 19" monitor to use as a dual boot system.
I got a USB to VGA adapter and got the second monitor recognized after installing the driver that came with the adapter.
Problem is that the external monitor is displaying the same size as the laptop display.
How can I get the full display on the external?
Pete

A:Laptop dual monitor question

Did you "Extend" or "Duplicate"?

Read other 1 answers
RELEVANCY SCORE 72.4

Hello I would like to use my old Toshiba laptop (it is Ubuntu Linux) as a secondary monitor for my desktop (which is vista)/ Is this possible without lots of hardware hacking? the laptop only has an S-video port....my desktop is running an old 8800 gts that i can plug into. Tried a few times to get this working but i was unsuccessful. I have done dual monitor before but not with a laptop as the secondary let alone a Linux laptop. Any help/advice would be greatly appreciated!
 

A:Desktop and laptop dual monitor

Hi, this isnt really that simple.

The S-Video port on the laptop is output, not input.

What you would need to do is open the laptop, disconnect the screen and then find a way (through adapters or by making something) to connect the screen to the desktop.

I'd suggest it's better to take the financial hit and buy a monitor, they are reasonably cheap these days if you go for a basic one.
 

Read other 2 answers
RELEVANCY SCORE 72.4

I need more desctop space so I've connected a Dell 1920x1080 monitor to my Vaio laptop to run as dual monitor together with the inbuilt 1280x800 screen. This works very well as a continuation of my desktop apart from a big problem with resolution:

In Vista's Display Setting I am given a choice of the following resolutions for the second monitor:

1280 x 800
1280 x1024
1360 x 768
1680 x 1059

(plus many more smaller ones).

None of these are the same as the monitor size (which is 1920x1080), so when I select, say, 1680x1059 (the highest) from Vista's choice the picture spreads these 1680x1059 pixels evenly out over the whole monitor screen which has approx. 20% more pixels and is not even the same format. The result is a hopelessly blurred picture which is also strecthed out (from ratio 8:5 to 16:9). Can you imagine? It is impossible to do any graphic work when circles are oval shaped, square shapes look rectangular and you are not quite sure on which where the lines are.

How can I get the same perfect resolution on the big screen as on the laptop screen?

A:Dual Monitor from my Vaio laptop

What graphics chip is on the Vaio? If it's either an ATI or Nvidia, you should check to see if you have the latest drivers for it.

You should be able to specify the secondary monitors (the 24") resolution in the cards control panel:
ie Catalyst Control Center for ATI > Display Manager or the Nvidia Control Panel for Nvidia.

Read other 3 answers
RELEVANCY SCORE 71.6

Hey. Firstly, apologies if this is a noob question but any guidance will be helpful.

Basically, i have a LCD monitor connected through HDMI to my laptop and both screens are working at the moment as duplicates.

What i am after is the screens to coincide and for me to be able to drag a window from my laptop to monitor, or vice versa.

When i have the 'extend desktop on 1 and 2' setting selected my laptop works as normal but the monitor screen only shows the wallpaper of my laptop and nothing else.

Is there anything i can do from here to be able to use both screens together or am i simply stabbing in the dark?

Thanks in advance,

Topcat9H.

A:Problems using dual screens with a laptop and monitor...

So what happens if you drag a window from one screen to the other or press
(Windows key + shift + >) or (Windows key + shift + <) ?

Read other 7 answers
RELEVANCY SCORE 71.6

Hi, I am a newbie here but thought someone could help. I have and IBM T30, using a IBM Docking station. I have hooked a second monitor up to the docking station that allows me to have 2 monitors running off the one internal serial device. I have added an ATI rage video card to allow me to have 3 monitors working together. This has workied for other's in the past. Here is the problem, when you work for a little while it will then freeze, causeing you to have to hard boot, then it will freeze all the time. Another latop will do the same thing. I have swapped out to a different docking station with another card of the same type and it does the same thing. I have updated driver's and done everything I can think of. My laptop has 1gig of memory so that shouldn't be an issue. Please any suggestions? Please Help!
Gina
 

Read other answers
RELEVANCY SCORE 71.6

I am trying to setup a home working station, and I am hoping to be able to have a dual monitor setup. I am not sure if I need to find a docking station, or port replicator, or what products are available for this. I'd prefer a station or port that accepts HDMI (fastest, best quality?) or the VGA plugs, but I was wondering what I would need to get that I can plug my laptop into, and still be able to take it travelling with me.

A:HP 15-ay039wm Laptop - Dual Monitor Station

@steve086 Welcome to HP Support Forum. Your machine does not have docking port therefore only one way to go: using USB Port Replicator. There are many around. To be able to connect to two monitors (3, including laptop screen) all you need is an USB Port Replicator which is DisplayLink certified. Example      http://www.displaylink.com/newsroom/press-releases/displaylink-powers-latest-hp-3005pr-usb-30-port-r...    https://support.hp.com/au-en/document/c04052300    http://www.displaylink.com/products/universal-docking-stations Travelling with this type of device is not ideal. Regards.

Read other 1 answers