Over 1 million tech questions and answers.

Solved: Brother 2070N is not found on my network

Q: Solved: Brother 2070N is not found on my network

I have a Brother 2070N printer connected to a D-Link DI-624 router. I use three laptops on the network, two Vista SP1 and an XP SP3. I have had no problems prior to this. Now none of my PCs can connect to the printer. The printer's ready light comes on, but goes off after a few minutes. I have tried resetting to the default settings (which I thought I was already using.) I was able to print a set of "printer settings" pages. The IP addresses match what I have set in the printer properties of each PC. I am at a loss. Any ideas? How about starting over completely? I'm not sure where else to go with this.

Thanks,
Max

RELEVANCY SCORE 200
Preferred Solution: Solved: Brother 2070N is not found on my network

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: Brother 2070N is not found on my network

Read other 9 answers
RELEVANCY SCORE 84

Anyone Help
Printer gives ERROR MESSAGE
error:cgpdftaraster:cups......
 

Read other answers
RELEVANCY SCORE 72.8

Hello.

I network an XP box and a 98 box via Ethernet. The two also share a DSL connection via a Zoom modem with a built-in router (5651_X4_2_2). The router connects to a Linksys switch (EtherFast 10/100 5-Port Workgroup Switch EZXS55W). The switch has SIX ports: five used (Zoom router patch, XP patch, 98 crossover, 98 patch, Brother patch) and one unused labeled "uplink" (not sure what uplink is - not important, is it?).

I've attempted multiple times using Brother's software to configure a Peer-to-Peer printer via the XP box but the printer is not recognized on my network. USB config as Network Printer was a breeze but want Peer-to-Peer so I don't have to turn on XP box to print 98 box docs.

Brother's tech support was scripted as expected and wasn't of much assistance. One suggested there is an IP address conflict.

I'm at wit's end and now turn to you guys. Any suggestions?

Thanks in advance.
 

A:Peer-to-Peer printer (Brother HL-2070N) config

Read other 7 answers
RELEVANCY SCORE 58.4

Hi There,
I am having problems configuring my Brother MFC-7860DW printer on my home network.
I have connected the printer via ethernet to my home wireless router. I assumed it would pick up a DHCP address from my router but it didn't. When I ran a configuration page, it gave me a 169.x.x.x address. So I manually configured a static IP with the appropriate subnet mask and tried to print from my vista printer, however it failed to print. I tried to ping the printer with the assigned static IP and it said "destination host unreachable". I've re-set printer and turned it off/on and also rebooted the wireless router. Still same thing. I'm wondering if there is something wrong with the printer itself? I also have tested the ethernet cable with a laptop and it is working. I even tried adding a static IP reservation in the web admin page of the wireless router.
I'm kinda stuck. Any ideas? Pls help.
 

A:Solved: unable to network Brother printer

Read other 10 answers
RELEVANCY SCORE 57.2

Links:

[Amazon] Brother Printer Work Smart MFCJ870DW
[Brother USA] Brother MFC-J870DW
[Amazon] Brother Printer MFCJ450DW
[Brother USA] Brother MFC-J450DW

=======================================================

Here's what happened. My family and I are looking for a new printer, and we're tired of being scammed by either cheap pieces of crap that don't last a year, or reliable printers with proprietary and/or expensive ink replacements. We initially set out to find a laser printer, and I found a really nice one, but it was monochrome. I am the only one who was fine with it. Everyone else said "COLOR ONLY!" pretty much unanimously.

That quickly ruled out laser printers, since I found it impossible to find a reliable, color laser printer with low operating costs within our measly budget of $200. I'm the only tech-minded person in the family, and I just can't get anyone on board with the idea of buying a more expensive and reliable product up front for years of savings down the line. That puts me in a very tight spot.

I eventually found these Brother Work Smart All-in-ones, and they have some of the highest reviews on Amazon. We chose the MFC-J870DW over the MFC-J450DW simply because it is the "higher model" and they're the same price on Amazon. However, I noticed this morning that they are so similar, and we were looking at both of them, that I accidentally purchased the MFC-J450DW instead.

We all literally could not care... Read more

A:Solved: Brother MFC-J450DW and Brother MFC-J870DW ||| Differences between these print

Is this in the wrong forum?
 

Read other 2 answers
RELEVANCY SCORE 52.8

Here I go again. I asked this before and the problem was solved. However I installed a new and upgraded mobo and cpu. The printer will not install now. For general safety I reinstalled W10 and all my programs. I downloaded and ran the Brother drivers setup.exe. All I get is "machine not found". This is so even though after running setup.exe the Brother mfc-j895dw printer appears in Devices and Printers each time I attempt the install though I remove that device each time. I even tried the previously failed cd install just in case but it still fails. Setup.exe runs and decompresses all the files into a folder Install which contains setup.exe. I deleted that folder and the driver download and tried running setup several times to no avail. I deleted the downloaded file, the Install folder, and the printer from Devices and Printers before attempting each reinstall. I disconnect the Brother from everything before starting setup and only reconnect it when installation says to reconnect. I also set the printer as the default printer each time to no avail.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: AMD Ryzen 3 3200G with Radeon Vega Graphics, AMD64 Family 23 Model 24 Stepping 1
Processor Count: 4
RAM: 16310 Mb
Graphics Card: NVIDIA GeForce GT 710, 1024 Mb
Hard Drives: C: 111 GB (64 GB Free); H: 465 GB (369 GB Free); I: 931 GB (817 GB Free);
Motherboard: ASUSTeK COMPUTER INC., ROG STRIX B450-F G... Read more

Read other answers
RELEVANCY SCORE 49.2

Does anyone know of a good, cheap, Big Brother type program that runs over a network?

I currently use RemoteAnywhere and like it's features except for the fact that the user can easily tell if I'm watching and they can see it running and can use the S.O.S function to annoy other users on the network.

I have also tried the Big Brother program but it slowed the network down too much. Does anyone know of any good programs that fit this description. Also, this will be used in a school environment so one with educational functionality would be handy as well, such as allowing the teacher to show a student what they are doing on their computer.

Thanks for the help here guys
 

Read other answers
RELEVANCY SCORE 48.4

Alright, so I have a computer, Windows XP, my brother has a laptop, same, windows XP. And I wanna start a LAN network, so that we can share files, not so that he can see my hard drive or anything, just like a sharing folder where I can throw things in there and he'd get it.

Because we like to share media, like music, videos, pictures and such. Instead of the hassle of getting USBs and sending over MSN and stuff.

And my computer has a printer connected to it. So how can I get my brother connected to the printer so he doesn't have to send me the document to print? Like he can just print from his room?

Thanks ahead!
 

A:How can I start a LAN network between both me and my brother's computers?

This TCP/IP Home Networking and File Sharing Tutorial should get you started.
 

Read other 3 answers
RELEVANCY SCORE 48.4

Hi, my brother has been having some problems staying connected to my HDD through a wireless network. My HDD has loads of videos and music files and i thought it would be best to share them and not continuesly burn them to a DVD..
But every time he opens any media player to play a file across the network, a error message pops up "network or path file not found". Somtimes he is able to play 2mins of any file then this error will occur...

I was thinking, what if i buy some network cable and run a direct link, pc-pc. Will i be able to still have the wireless network running on both pc's and have this connection between them or will there be some kind of conflict.

The internet is connected though the wireless router so i kind of need the wireless, i know this problem has nothing to do with the wireless network cuse we are able to play LAN games with no problem.

A:Brother's PC looses connection to Network HDD

Quote:





Originally Posted by Aus_Karlos


Hi, my brother has been having some problems staying connected to my HDD through a wireless network. My HDD has loads of videos and music files and i thought it would be best to share them and not continuesly burn them to a DVD..
But every time he opens any media player to play a file across the network, a error message pops up "network or path file not found". Somtimes he is able to play 2mins of any file then this error will occur...

I was thinking, what if i buy some network cable and run a direct link, pc-pc. Will i be able to still have the wireless network running on both pc's and have this connection between them or will there be some kind of conflict.

The internet is connected though the wireless router so i kind of need the wireless, i know this problem has nothing to do with the wireless network cuse we are able to play LAN games with no problem.





Assuming you both have an RJ45 plug on your networking cards you should be able to do a direct connection. You need to make sure you buy a cross-over cable. If you buy a standard networking cable it will not work.

BTW: It could very well be the wireless connection. When you are gaming there isn't as much data being sent over the network as there is when he is streaming music/video. If possible, try to place the wireless router closer to his PC to see if the problem persists.

Lydokane

Read other 6 answers
RELEVANCY SCORE 48.4

Yesterday my brother woke up and his computer would not connect to the network, would get stuck trying to identify it.
I got him on a a little wireless adapter (as opposed to a wired one) and it slowed the connection down for me. He is now using a different computer (wired) and the connection is still very slow.
If my computer is the only one connected I don't have any issues, if either of the computers he can use is connected (wired or wireless) I have connection issues.
At first I thought it was an issue with his PC tried to see about fixing his driver and if his IP was borked to no avail, but now I'm starting to think it could be mine or an issue with the router/modem (which was provided to us by our ISP) but I have no idea how to even begin to figure out what is wrong.

Read other answers
RELEVANCY SCORE 48.4

Model: Brother MFC-9440cn Printer/Scanner/Fax
PC's: Windows 7 32bit

It was working before I went in to check on it its connected to a network of about 6/7 computers all of a sudden its not printing. So I check all cabling and troubleshoot it, it says something like "unable to find printer on the network". So I reinstalled the drivers and on the installation it detects the printer fine but same issue after install. So I decide to try the scanner and it works fine.... Im not one to use faxes so i didnt try that but im assuming the printer alone is the issue so any tips on how to fix it?

Thanks in advance for any advice.
 

Read other answers
RELEVANCY SCORE 47.6

I cannot find a driver when trying to install the printer over my home network.Printer is installed and working on Dell XP 3100
Printer has prevously been installed via usb on Tosh Win 7
Printer & file sharing are set up on both computers
Files and printers can be seen from the Tosh that are on the Dell.
When i try to install, I get error message that a driver cannot be found. Remeber the printer is installed locally on both machines... so drivers are present.
Does anyone know how to direct to the driver? I do not have an printer install disc... installed from download.

thanks
JP

A:Install Brother HL-1440 as network printer on Windows 7

With my Brother, running the downloaded installer finds the printer already on he network. Sets it up and install the drivers. Otherwise, W& will try to use it's geneic WSD, which is not bidirectional.
I did have a problem that I resolved by completely uninstalling and re-running the latest installer from Brother's website. Hope that helps.

Read other 1 answers
RELEVANCY SCORE 47.6

The printer is hooked up through the router via ethernet cable, in a normal port (no special network printer port on router, not the internet connection port, ordinary port where additional computers hooked up to network go)

I am doing the configuration (changing IP addresses, installing the software as indicated by the user's guide) on one computer that is connected to the router via cable

The OS of the configuring computer is WinXP 64 Bit (and i hope the Win64 Bit is not a problem because i bought the printer knowing it was "fully compatible with WinXP64" and it would mess up my whole office if it is incompatible

I did the installation and followed the steps, i changed the IP of the printer and the IP in the installation so that they have the same IP, when the software asked, I entered the same DNS my computer uses to connect to the router, and for "gateway", i entered what I put for my computer's "default gateway"

after all that, i hit next and it says it was successful

the diagnostic program which automatically runs on reboot after installation says that the printer is not connected to the network/computer/printer is offline/etc

thanks for any help you guys could give
 

A:Linksys WRT54G + Brother DCP-540CN Network Printer

Read other 16 answers
RELEVANCY SCORE 47.6

I am installing windows NT server 4.0 with service pack 4 as a member server on the network. The problem is in network neighborhood I get a listing of all computers on the network but can only access the server, all others have the message - ' the network path was not found'. I can ping the machines so the physical connection is fine and I have set the network server as the browse master. What am I missing?
 

A:{Solved} - Network path not found

Read other 12 answers
RELEVANCY SCORE 47.6

I had to refresh my laptop after installing an update and got this message: "Restoring Network Connections" window.......An error ocurred while connecting to Z. to \\Epson 80128 \Memory Card. Network path was not found.

Can anyone tell me what this is please? I have recently installed an Epson All-In-One 435 printer and it's worked fine. I now get this message and I don't know why. I am not entirely a beginner but don't know an awful lot about computers. I'm a pensioner so plain English will be most acceptable! Thankyou for any help you can come up with.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 32 bit
Processor: Genuine Intel(R) CPU T1600 @ 1.66GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3002 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1308 Mb
Hard Drives: C: Total - 227598 MB, Free - 132341 MB; D: Total - 10872 MB, Free - 1844 MB;
Motherboard: Wistron, 3612
Antivirus: Norton Internet Security, Updated and Enabled
 

A:Solved: Network path was not found

Read other 8 answers
RELEVANCY SCORE 47.6

On one of my PCs I am able to access the various drives as either a local device or as a network device. For example, I can access the hard drive as a local device C:\ or as a network device \\PM1\C (PM1 is the computer name).​
Same is true for the second hard drive (D:\ or \\PM1\D), the CD/DVD drives, the memory card reader. But it is not true for my external (USB) hard drive. I can access the external drive as N:\ but I am NOT able to acess it as \\PM1\N. Windows tells me \\PM1\N can not be found even though N:\ is found.​
As best I can tell I have Sharing and Security set properly for all of the drives including N. All of the drives are NTFS. I'm running WinXP Pro SP2.

If I move the external USB drive to another PC I do NOT have the same problem there. So I think the problem is specific to how something is set in this one particular PC.

Any clues?​
Peter​
 

A:Solved: Network Device Not Found

Read other 8 answers
RELEVANCY SCORE 47.6

Hi all. I just reformatted my hard drive and reinstalled windows after a nasty run-in with a trojan. Everything seems to be in order except my networking. I plugged in my ethernet connection and nothing happened, when usually it will recognize it. when I tried to open IE to double check and it opened the network connection wizard window. When I selected "join local network" it said that my hardware was not found. My guess is that my drivers are messed up somehow with my networking (the ethernet port is built in though, it's not external.) I have all my system disks, and when I put in the Dell Resource and Drivers CD it just came up with a self-help window that gave me nothing. Thanks in advance for your help!

Erik
 

A:Solved: Network Hardware not found

Read other 6 answers
RELEVANCY SCORE 47.6

Hi all.. I'm brain dead at the moment so looking for some assistance. I just formatted and re-installed XP on a Dell laptop and device manager says I have a network controller not found. Ethernet port is working and and it appears so is everything else. But before returning the laptop to the owner I would like to find out what isn't working. Anyone know of a way to check and see what particular device this is referring to?
 

A:Solved: Network Controller not found

Read other 6 answers
RELEVANCY SCORE 47.2

Hey
I have a HP Pavillion dm4 1050so Notebook PC.
I upgraded from Windows 7 Home Premiuim to Ultimate .
As i was downloading the drivers for HP.
all the drivers worked execpt the ones for the WLAN installed,
I have tried installing the drivers
Intel PRO/Wireless Drivers for Microsoft Windows 7
again and again .. but it shows that
it may not have been installed properly,
And when i checked the device manager, It shows
"Network controller device and unknown deivce" for which it has nt found any drivers.
I guess unkown device must be WLAN switch,..
so now the weird situation is that my laptop cannot connect to a wireless netowrk but my mobile phone can!!
could someone please help me out>??

Ajay

A:[SOLVED] Network Controller Drivers Not Found

Go to this link and insert your operating system. Quite often the network drivers are included in the chipset drivers. Also, while you're at it if you haven't already, update your BIOS too. ALWAYS make sure you have the latest drivers because it'll save you heartache in the future!

Try the chipset driver and see if that solves your network issue.

Good day!

Mike

Read other 5 answers
RELEVANCY SCORE 47.2

Hello all,
My friends pc shows no available network adapters in task manager. Device manager shows the adapter as working. c:\ ipconfig returns nothing. Ran malwarebytes and a trojan program both ran clean. Used netsh to reset winsock, ip and ipv4. Still no love. Gently guide me forward oh wise ones.

Thanks
 

A:Solved: No active network adapters found

Read other 6 answers
RELEVANCY SCORE 47.2

Hello, everyone. I'm running Windows XP Professional, SP 2. I've never had problems getting on the internet, but yesterday, when I started up my computer, i get the error message, "No Active Network Adapters Found" under the Networking tab of the Task Manager, and now I can't get on the internet even though it'll show that I'm connected. The Network Adapters section in the Device Manager isn't reporting any problems.

However, there's also another problem that occurs simultaneously: now, while my computer's booting up, if I keep re-opening the Task Manager, it'll literally take about 5 minutes to populate the "User Name" column under the Processes tab. In addition, if I try looking at My Computer, nothing will appear and the searchlight will come up for these 5 minutes. I'm not sure if this and the network adapter problem are interconnected, but I figured I'd metion this too.

Thanks in advance for any help provided! Please let me know if any other information is needed. Thanks again!
 

A:Solved: No Active Network Adapters Found

Read other 9 answers
RELEVANCY SCORE 47.2

Hi,
My Xbox 360 recently went in for repairs due to a malfunction in the hardware. When i got it back a few days ago, I reconnected it to my wireless network using the same method that i used when i first got the Xbox. It was then that the internet connection on my computer stopped working. The network works fine because i can ping the main computer in the house. When I opened the linksys control panel i received a message reading, "You are connected to the network, but the internet cannot be found. I have tried a number of tests and steps that I will list below and have searched numerous forums, but to no avail. If anyone has any ideas please help.

Other Information

-There are 3 computers (excluding mine), a psp, and an xbox 360 all with internet connections that are running great.
-The main computer (the one connected to the router) is a mac while all the others (including mine) are running on Windows XP Home Edition.

What I've Tried

-I have disconnected and reconnected the internet connection.
-I have been able to ping the main computer.
-I have not been able to ping google.
-I have restarted the DSL and Router and have gotten no results.
-I have run the internet connection wizard to make sure all of the settings were correct.

I any one has any suggestions or comments it would be greatly appreciated.

Thank You for Your Time,
R.I.
 

A:Solved: I am connected to the network but the internet cannot be found???

Read other 16 answers
RELEVANCY SCORE 47.2

Hi,

Thanks in advance to anyone who can help. After reinstalling Windows XP Home edition on my PC I have found that a driver for the Network Card could not be found (see attached file containing pics). In Device Manager the network card does not appear under network adapters but instead under other devices as an Ethernet Controller with a yellow question mark and exclaimation point. When viewing the details the device status says the driver is not installed (code 28). On microsoft's website it says the following on code 28:

Code 28
The drivers for this device are not installed. (Code 28)
Recommended resolution

To install the drivers for this device, click Update Driver. This starts the Hardware Update Wizard.

Unfortunately, Windows does not appear to have a driver and I can't connect to the internet to search for one.

I tried installing DriverGuide which says the device is an "82551 10/100 Mbps Ethernet Controller" made by Intel.

Can anyone please give me some guidance on how to fix this problem?

Thanks

BurnleyBoy
 

A:Solved: Network Card Driver Not Found

Hi,

I have just found the driver for this network card on Dell's website, installed and the card is now working! Thanks!
 

Read other 2 answers
RELEVANCY SCORE 47.2

I have attached my home network configuration. Only one part is not working. When the David-PC (win 7) tries to access the SharpeLaptop (XP) i get error code 0x80070035; NETWORK PATH NOT FOUND. This fails on wireless or ethernet hookup. All PC's are using McAfee Virus software which is supplied with ATT U-verse service. Trying to access the the daves-dell PC (XP) works fine Either of the 2 XP PC's can access the David-PC OK. The only failure is trying to access the laptop from the David-PC.
If I disable the McAfee firewall on the laptop, then the David-PC can access the laptop. I have tried duplicating all the McAfee settings of the two XP PC's and still fails.
Any ideas???
 

A:Solved: Home network Path Not Found

Even though all 3 PC's had the same McAfee Virus protection program, apparently the one on the laptop was corrupted. I reloaded the program on the laptop and now all is working okay.
 

Read other 1 answers
RELEVANCY SCORE 46.4

Hi,

Hope this is the correct Forum for Printer questions.
Is it ?

Have a 5 yr old Brother printer (HL-2140) which uses a TN-360 ink Cartridge.

A Brother branded "high yield" TN-360 goes for about $ 50. Wow.

I see that Amazon carries several other non Brother, but supposedly compatible
TN-360 cartridges by mfg. names I've never heard of.

Much, much cheaper.
Am willing to try one, but am very uncertain which of the brands to go with.

Anyone have any experience with non Brother labeled "compatible" cartridges ?
Any good ?
Which Brand should I try, perhaps ?

Note: It's almost worth buying a brand new Brother printer instead !

Thought on ?

Thanks,
Bob

A:Brother Printer and Non-Brother Branded Ink Cartridges ?

Hi, again:

You will likely find that the answer to this question falls into 2 major camps:
Only use OEM, branded ink from the printer manufacturer (or a trusted, high-volume, reputable seller), OR
It's perfectly fine to use knockoff, refurb, non-branded
I don't know anything about Brother, as I have been using HP printers/all-in-ones since the days of the printing press.

No matter which brand, in the printer industry, the ink/toner is how the manufacturer makes its money, not on the hardware.

There are many factors in the risk:benefit calculation, such as budget, volume of printing needs, need for optimal performance, etc.

My own personal experience for relatively heavy home/home office use is that it is not worth skimping on the cost of discounted ink/toner.
There can be serious quality issues with the cheap stuff (even branded, refurbished ones).
And there can be quality issues even when buying "new" OEM ink/toner from 3rd-party sites or even brick and mortar big box stores (the items may be legit, but they are stale).
If the price seems too good to be true, it probably is.
HP has a terrific ink/toner program -- 2 or 3 mouse clicks and I have the products on my doorstep 1 or 2 business days later, with free shipping. The price is highly competitive, and the ink/toner is always fresh and high-quality. This works very well for me.

Your mileage may vary, of course....
Cheers, MM
P.S. Did you resolve the other issue reported HERE??? If so, it helps us (a... Read more

Read other 4 answers
RELEVANCY SCORE 46.4

I have XP Pro on an IBM T42 laptop. Had significant trouble with trojans/malware recently, but believe I have cleaned and recovered.

Currently my wireless network at home is functioning OK. But when I go to "View Wireless Networks" it says that there are "No wireless networks in range." Also when I go to Advanced Settings, there is no data listed under "Preferred Networks."

I have two concerns. First I am wondering if there is still some residual effect from the malware that I should be concerned about. Second, when I travel I cannot search for available wireless networks because the utility always reports that none are available, even though some networks certainly are.

Thanks very much for any advice and help.
 

A:Solved: XP wireless network - no networks found message

Read other 11 answers
RELEVANCY SCORE 46.4

Hello Everyone And Happy New Year,
New to this site,

My problem is, I was on my pc, left to go to the store,
when I came home, I got this message, and my pc won"t log me on...........(Using xp pro ser. pk. 3, Firefox, wired connection.)

Server not found
Firefox can't find the server at isearch.avg.com

But my home page is yahoo.com

I checked this out and it said I had Error Code 12007
not sure what this is or if it's relevant to my case.

My wife's pc which I'm using now, she doesn't have that problem,
I have no problem logging on with her pc.
She's using Internet Explorer with the same wired connection.
Both have Windows xp..........

I also found out that in Network Connections,
I have, Red X Local Area Connection
Network Cable Unplugged..
I checked everything and all were connected.
I tried unplugging the modem and linksys than waiting
45 seconds and reconnecting them. still the same problem.

Thank-You,
John God

A:[SOLVED] Server Not Found Network Cable Unplugged

This post can now be closed.
The problem was a broken wire plug leading into the linksys.
The end that locks the wire into the linksys was broken off
Was not making contact.............

Thank-You,
Johngod

Read other 1 answers
RELEVANCY SCORE 46.4

I have Dell Inspiron 530 with Netgear router.
I finished uninstalling McAfee, installed Ad-Aware Total Security, and these problems started.

I'm unable to connect to internet. Network and Sharing Center says 'Currently not connected to any networks". Clicking on the X sign says:
Network adapter "Intel 82562V-2 10/100 Network Connection" is experiencing driver or hardware related issues. Make sure Internet Protocol Bindings are correct ... Ensure that Internet Protocol Version 4 (TCP/IPv4) and Internet Protocol Version 6 TCP/IP/v6 are selected in configuration for the network adapter "Local Area Connection".

Here are the things I have already done tp no avail:
- checked to make sure TCP/IPv4 and TCP/IPv6 are selected
- Uninstalled Ad-Aware Total Security and re-booted
- Turned off WIndows Firewall and Windows Defender
- Installed new drivers for Intel 82562V-2 10/100

Device Manager shows these are working correctly:
Cisco ANyConnect VPN Virtual Miniport Adapter for Windows x64
Intel 82562V-2 10/100 Network Connection

and shows yellow warning (!) signs for these:
! Intel 82562V-2 10/100 Network Connection - RRNetCap Miniport
! WAN Miniport (IP) RRNetCap Miniport
! WAN Miniport (IPv6) - RRNetCap Miniport
! WAN Miniport (Network Monitor) - RRNetCap Miniport

I have tried to uninstall these and disable them but hasn't helped.

Reading other threads on this, it seems the problems were either fixed by:
- system restore to a previous resto... Read more

A:Solved: Problems connecting to Intenet, No network found

I just Re-uninstalled Intel 82562V-2 10/100 Driver, re-booted and it fixed the
issue somehow!!

This is after 6 hours of trying to figure out what was going on.

GO-figure.
 

Read other 2 answers
RELEVANCY SCORE 46

I tried doing an upgrade this weekend for a Medical Record program... things went south so i restored the backup, only problem is that we had a mapped drive pointing to the directory containing the program... now when i try to map it , i am told that The drive could not be mapped because no network was found... any ideas where i might check to fix this?

Thanks in advance!
 

Read other answers
RELEVANCY SCORE 46

Hi and sorry if this sounds confusing but I was hoping I could maybe get some help. I got a Acer Laptop from my buddy that had windows 7 and when he had it his harddrive had crashed so he put in a older harddrive in it and installed windows Vista. Doing that caused the ethernet and network adapter to not work at all (says it need drivers) and I can't access the internet at all on it. I don't know if I can grab the drivers somewhere else or if I have to just count my losses. Please let me know if you need anymore information thank you!
 

A:Solved: My network adapter and Ethernet drivers are not found on my Vista

Read other 13 answers
RELEVANCY SCORE 46

On my other computer I am running Windows XP and I cannot connect to the internet, I have factory restored the computer and am having problems conneting to the internet. It shows the "Local Area Connection" Icon is missing and that there is no "Network Adaptor" So it would be nice if someone could help out.

-Thanks.
 

A:Solved: Local Area Connection + Network Adaptor Not Found?

Read other 16 answers
RELEVANCY SCORE 43.6

this is the log of HijackThis , plz help...
thkz

pic of my desktop --> http://clientes.netvisao.pt/jfernand/pc.JPG

Logfile of HijackThis v1.97.7
Scan saved at 20:32:12, on 26-07-2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\RUNDLL32.EXE
C:\Programas\Zone Labs\ZoneAlarm\zlclient.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\System32\ZoneLabs\isafe.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
D:\Programas\Webroot\Spy Sweeper\SpySweeper.exe
D:\Ficheiros\browser removers\HijackThis.exe

O3 - Toolbar: &Rádio - {8E718888-423F-11D2-876E-00A0C9082467} - C:\WINDOWS\System32\msdxm.ocx
O4 - HKLM\..\Run: [ROBOTFTPSCHED] D:\Programas\RobotFTP\botsched.exe
O4 - HKLM\..\Run: [NvCplDaemon] RUNDLL32.EXE C:\WINDOWS\System32\NvCpl.dll,NvStartup
O4 - HKLM\..\Run: [nwiz] nwiz.exe /install
O4 - HKLM\..\Run: [NvMediaCenter] RUNDLL32.EXE C:\WINDOWS\System32\NvMcTray.dll,NvTaskbarInit
O4 - HKLM\..\Run: [Zone Labs Client] "C:\Programas\Zone Labs\ZoneAlarm\zlclient.exe"
O4 - HKLM\..\Run: [DAEMON Tools-1033] "D:\Programas\D-Tools\daemon.exe" -lang 1033
O4 - HKLM\..\Run: [NeroFilterCheck] C:\WINDOWS\system32\NeroCh... Read more

A:[Solved] plz help - big brother...

Read other 9 answers
RELEVANCY SCORE 43.2

Would someone please mind taking a look at my this log for me?

Thanks in advance:

Logfile of HijackThis v1.97.7
Scan saved at 10:11:13 PM, on 1/16/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\fast.exe
C:\Program Files\Microsoft Hardware\Mouse\point32.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\NavNT\vptray.exe
C:\WINDOWS\System32\P2P Networking\P2P Networking.exe
C:\Program Files\Winamp\winampa.exe
C:\Program Files\Hewlett-Packard\HP Software Update\HPWuSchd2.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\bin\hpotdd01.exe
C:\Program Files\MusicMatch\MusicMatch Jukebox\mmtask.exe
C:\WINDOWS\System32\ctfmon.exe
C:\Program Files\Microsoft Money\System\mnyexpr.exe
C:\WINDOWS\System32\RUNDLL32.EXE
C:\Program Files\Steam\Steam.exe
C:\Program Files\Siber Systems\AI RoboForm\RoboTaskBarIcon.exe
C:\Program Files\Adobe\Acrobat 5.0\Distillr\AcroTray.exe
C:\Program Files\NavNT\defwatch.exe
C:\Program Files\Executive Software\DiskeeperWorkstation\DKService.exe
C:\WINDOWS\System32\inetsrv\inetinfo.exe
C:\Program Fil... Read more

A:[Solved] My brother's Hijack This! Log

Read other 6 answers
RELEVANCY SCORE 43.2

A friend of mine called me last night with a problem trying to un-install the Brother software for a multifunction printer. This particular printer is no long manufactured, so is hard to find much about it. She has tried the Brother un-installer with no luck. Every time she boots up her computer she gets this message...Failed to start the control center. The required info is missing. Please re- install the multifunction suite. CC3-001-00001907. She brought it over last evening and I tried for a couple hrs to get rid of it. I was reading info on line and tried about everything I read. I went into the registry and deleted everything I saw that was Brother. Still no luck. We ran malwarebytes free just in case it was a type of malware. Did a full scan and found nothing. Today she called me and says it is still there. I told her how to open files and folders and delete anything there with Brother on it. She did find a folder and deleted it. Still doing the same thing. What next??
Thanks for any help.
 

A:Solved: brother mfc - 240 c software

Read other 10 answers
RELEVANCY SCORE 42.8

Could someone take a look at this. My brother is infected and I don't really want to screw up his machine with my lack of knowledge with HiJack this.

He has already run Adaware, Spybot, and done a virus scan. He is getting some sort of popup "freesites" I think he said. He just restored his machine the other day and got smacked before he even got the thing updated.

Thanks folks.

Logfile of HijackThis v1.99.1
Scan saved at 5:15:49 PM, on 3/12/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
c:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
c:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Softex\OmniPass\Omniserv.exe
C:\WINDOWS\System32\ScsiAccess.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\WINDOWS\System32\jhedxwoursikbm.exe
C:\WINDOWS\System32\MSDATLST.exe
C:\windows\system\hpsysdrv.exe
C:\WINDOWS\LTMSG.exe
C:\WINDOWS\System32\MSDATLST.exe
C:\Program Files\Microsoft AntiSpyware\gcasDtServ.exe
C:\Program Files\Softex\OmniPass\OPXPApp.exe
C:\Program Files\Intern... Read more

A:Solved: HiJack This log of Dumb Little brother.

Read other 8 answers
RELEVANCY SCORE 42.8

My brother went around on some sites last night that were serials and keygen related, and I do not authorize any sort of behavior like this as it is illegal. However he tried to find a good antivirus and when I started my computer this morning, I found WinAntiVirusPro2007 installed so I deleted it and then the fun began. Adware like crazy. I have ran Spybot S&D, Nod32, and Adware Personal many times over and still cannot get rid of everything his download must have installed.
After visiting the forums here, I've downloaded hijackthis and here is my first log. Any help would be greatly appreciated.

Logfile of HijackThis v1.99.1
Scan saved at 6:08:48 PM, on 6/14/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16473)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Eset\nod32krn.exe
C:\Program Files\Common Files\New Boundary\PrismXL\PRISMXL.SYS
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Digital Media Reader\shwiconem.exe
C:\WINDOWS\system32\hkcmd.exe
C:\Program Files\CyberLink\PowerDVD\PDVDServ.exe
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\Program Files\DriveHQ\DriveHQ Desktop Express\D... Read more

A:Solved: Little brother likes to help - Please advise

Read other 10 answers
RELEVANCY SCORE 42.8

Logfile of HijackThis v1.97.7
Scan saved at 8:14:37 PM, on 8/19/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb08.exe
C:\Program Files\Hewlett-Packard\HP Software Update\HPWuSchd2.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\bin\hpotdd01.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Real\RealPlayer\RealPlay.exe
C:\WINDOWS\System32\EXSHOW95.EXE
C:\WINDOWS\System32\ICO.EXE
C:\Program Files\Hasbro Interactive\Atari Arcade Hits 1\Atari icon.exe
C:\WINDOWS\System32\Pelmiced.exe
C:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr.exe
C:\documents and settings\administrator\local settings\temp\8cu5B.exe
C:\documents and settings\administrator\local settings\temp\SGgWMA.exe
C:\WINDOWS\System32\EXSHOW.EXE
c:\progra~1\intern~1\iexplore.exe
C:\documents and settings\administrator\local settings\temp\venIK9b.exe
C:\WINDOWS\System32\msjml2.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Common Files\Symantec Shared\S... Read more

A:Solved: Brother in Laws Machine

Read other 9 answers
RELEVANCY SCORE 42.8

Hello, I'm helping a blind person out with her printer and can't seem to get the thing to work. She's running 98se. She has a braille printer connected to one parallel port and a scanner to another parallel port.
I've installed a Brother HL5040 via USB but it won't work. Is the USB port COM1 & COM2? The other port is an Epson port LPT1. Can I delete that port? She used to have an Epson and there are traces of Epson all over this pc. I thought LPT1 was a parallel port????
Can someone help me out? A PC guy would do it but he wants $150 just to come over and she can't afford that.
Thanks so much and may God bless,
Peter
 

A:Solved: USB and Brother HL5040 printer....

Read other 9 answers
RELEVANCY SCORE 42.8

I have a brother printer Mfc-j265w with the screen saying unable to init 4f. I have search the web for a fix. The fix said to clean the encoder strip check for foreign objects, and to reset the machine. While doing these steps I found that the printer head will not move from the far right. Can I get some help with this or is my printer toast? Thank You for your help Larry

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.20GHz, Intel64 Family 15 Model 6 Stepping 5
Processor Count: 2
RAM: 2039 Mb
Graphics Card: Intel(R) Q965/Q963 Express Chipset Family, 384 Mb
Hard Drives: C: Total - 76216 MB, Free - 44887 MB;
Motherboard: Hewlett-Packard, 0A60h
Antivirus: AVG AntiVirus Free Edition 2015, Updated and Enabled
 

A:Solved: Brother Printer Problem

You've probably seen this
http://fix-your-printer.blogspot.de/2012/10/solvinf-error-code-4f-on-brother.html

It might be worth trying this
http://tricks-collections.com/reset-all-models-of-brother-printers/
 

Read other 3 answers
RELEVANCY SCORE 42.8

I'm running a Windows 7 machine. I've installed the drivers on this computer and can print from it with no problems. However when I follow the on-screen instructions to set up the wireless connectivity for the printer, the set up wizard does not find any devices. Per the instructions, I've tried disabling my computer's firewall but to no avail. I've tried both set ups (with an Ethernet cable and without) but both have yielded the same result. I've checked to make sure all the cables are inserted correctly and firmly. I also printed a network configuration sheet and the wireless on the printer is "active."

I've also tried going into my modem (U-verse) and see the printer hooked up via Ethernet cable, however the status is "off" (though the printer is on). I've tried disabling the firewall for the printer through my router but I get an error that I am not allowed to disable it.

Am I missing something here? Could something be wrong with the printer or is it just user error...?

Thanks in advance for any help!
 

A:Solved: Help setting up Brother HL-2170W

Is this really solved?
 

Read other 1 answers
RELEVANCY SCORE 42.8

When I try to print the Selection and Current Page options are greyed out. It used to be available so something has been erased or corrupted.

Can anyone help please. I dont use these options very often but they are useful occassionally.

-----------------------------------------

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz, x86 Family 6 Model 15 Stepping 6
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce 6200 LE, 512 Mb
Hard Drives: C: Total - 232048 MB, Free - 174864 MB; D: Total - 6404 MB, Free - 1507 MB;
Motherboard: ASUSTek Computer INC., Basswood, 1.05, MS1C69S06101833
Antivirus: Virgin Media Security Anti-Virus, Updated: Yes, On-Demand Scanner: Enabled
 

A:Solved: Brother Printer DCP-135C

Read other 7 answers
RELEVANCY SCORE 42.8

I want to make a Minecraft server for me and my brother to play on together, we both have Minecraft and i have the server up. I can get on it but I can't figure out how to get him on it. From what I understand I don't need to port forward because we are in the same house and on the same internet. I've tried putting the Ip address in the server address, but it always says it is out of reach.
Honestly I have never put up a server. I downloaded the software and ran everything. I have not done anything like port forwarding, I don't know how to and from what I've read I don't need. I can get on the server I jest can't get him on. We both have a PC both with Windows.

All I want is to have a server for us to play on. Thank you for any help. I really don't know how to do this so any help would be great.
 

A:Solved: Can't get my brother on my Minecraft server

Read other 13 answers
RELEVANCY SCORE 42.4

hi, iv'e ran adaware,spybot,and agv.all windows updates are done. just seemstobe some stuff leftover in the hijackthis log that needtobe looked at.
thanks ahead of time forthe help..

her's the log.....

Logfile of HijackThis v1.99.1
Scan saved at 8:49:34 PM, on 6/13/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\WINDOWS\system32\S3apphk.exe
C:\WINDOWS\LTMSG.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Pinnacle\InstantCDDVD\InstantWrite\iwctrl.exe
C:\Program Files\TizzleTalk\TizzleTalk.exe
C:\Program Files\MSN Apps\Updater\01.03.0000.1005\en-us\msnappau.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
C:\windows\system32\rlvknlg.exe
C:\WINDOWS\system32\m?config.exe
C:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
C:\Program Files\InterVideo\Common\Bin\WinCinemaMgr.exe
C:\Program Files\... Read more

A:Solved: brother-in-laws computer has a problem or two

Read other 6 answers
RELEVANCY SCORE 42.4

I have a Brother Multifunction device that I need to configure the scanning part. I have looked and can't find how to be able to add computer accounts or email addresses to the machine for people to use. Any one have any suggestions?
 

A:Solved: Brother MFC 8480 DN Scanner Setup

You don't add Windows user accounts or email addresses to a printer or scanner. You connect it to a wireless router (either wired or wirelessly) so that all computers connected to that same router via wireless connection can share it.
 

Read other 3 answers
RELEVANCY SCORE 42.4

running Windows XP Home & FireFox. my printer is connected via a USB port. when i try to print, the printer display shows 'receiving data', the printer icon on the monitor task bar disappears (as in the doc has printed) but i don't get a physical printed doc. i use PaperPort a lot so i switch back & forth between hard copies & virtual copies. the virtual copies aspect works fine, just can't get hard copies. i have tried disconnecting the power cord, didn't help. suggestions, please!
 

A:Solved: Brother MFC-440CN Printer won't print

Read other 6 answers
RELEVANCY SCORE 42.4

Can someone please point me in the right direction to learn how to refurbish the drum in a Brother laser printer?

Thanks in advance.
 

Read other answers