Over 1 million tech questions and answers.

Will not accept RDP incoming

Q: Will not accept RDP incoming


I have done everything I can think of to allow incoming RDP sessions, but it is not working.

I have checked the box under system properties/remote (Allow Remote Assistance connection to this computer) and I have check the box under McAfee Firewall/ports and system services for port 3389.

I have also temporarily turned off the firewall....no good.

I know that system I am RDP'ing from works because I can get to a Windows XP machine.

Thanks in advance.

Preferred Solution: Will not accept RDP incoming

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Will not accept RDP incoming

Quote: Originally Posted by mlvogt57


I have done everything I can think of to allow incoming RDP sessions, but it is not working.

I have checked the box under system properties/remote (Allow Remote Assistance connection to this computer) and I have check the box under McAfee Firewall/ports and system services for port 3389.

I have also temporarily turned off the firewall....no good.

I know that system I am RDP'ing from works because I can get to a Windows XP machine.

Thanks in advance.

What version of win 7 are you using (starter,home,pro,ultimate)??
ken J

Read other 8 answers

To make a long story short, I'm following this guide to allow my Dreamcast to connect through my computer's broadband connection.

I got through it all fine until I have to create a connection that can accept incoming connections. I go into the new connection wizard but on the screen to set up an incomming connection, upon clicking next, I get the following message (sorry for using putfile):http://putfile.com/pic.php?pic=10/29922373750.jpg&s=x10

I'm assuming it's an XP Home Edition thing, which is what I'm running, but I'm not sure.

A:Accept Incoming Connections

Read other 6 answers

Hi all!

Yesterday, after my Win 8.1 box did an automatic restart because of updates, I can't connect to it anymore! When I try, the client gives me an error after approx 30 seconds, suggesting that the remote PC might be turned off, or having network related errors! I've been connecting to this machine this way for the last 6 months, and I just doublechecked that incoming RDP is turned on, and a "netstat -a -o" also shows that the port should be listening for connections. I also tried turning the built-in firewall off, no luck.

Anyone with suggestions? I really need RDP, since it's the only way to gain full productivity (ie multiple screens, printing to local printer etc)


A:Win 8.1 Pro RDP won't accept incoming RDP after restart

Just noticed that there is no IP address in the table for port 3389, could this be related to my problem? Haven't changed anything on my network adapter, though!

Read other 3 answers

FIrst of all, hi everybody, this is my first post here!!

i use win xp pro w/sp 2 and usb adls modem, and this is my problem: i created a vpn with a friend of mine, everything is perfect, except for one thing: i can connect to him (i mean, he acts as server) but i cannot be the server, when he tries to connect to me, he gets a connection refused error.. another example, i can play games as client but not as host... i can use a software for remote desktop (VNC free edition) and i can see his desktop (act as client) but he can't see mine (he gets timeouts and connection refused errors)...

i shutdown the firewall, the antivirus, and lowered internet security in windows, but i never managed to make it work!

apart from that, every p2p program works perfectly, so i'm a bit confused...

help...! i don't know how to fix this issue! wacko.gif

thanks in advance!

A:XP doesn't accept incoming connection, Help!

Do you have a DSL router with a firewall on it? Do you know what port is being used when you're trying to act as a server? If so, have your friend try to telnet to that port. You can also try locally telnetting to that port. If he can't, then the port is being blocked for some reason. If you can't, then there may be something else going on. If you're able to change the port, try that.

Read other 3 answers


My husband and employer both sent me an email that shows the correct date in the email time line, but Outlook shows a recieve date of April 2008.

It doesn't happen on every email, just some. We've all checked our clock dates and their correct. Talked to my Internet Service Provider and they said it was an Outlook problem.

Any ideas?


A:Incoming email randomly shows incoming date 04/08

Hi helpcook, you dont mention what version of Outlook you are running but this link is the same for most versions http://support.microsoft.com/kb/q197717/ Also check Windows control panel>date & time>time zone. Make sure all is correct.

Read other 2 answers

Audio jack from laptop only accept the first device introduced and if i want to exchange headphones with speakers the speakers dont work,but if i restart and insert the speakers work very good,please tell me how to solve the problem 

Read other answers

Hi....don't know if there is an answer for my "problem" or not...Hope so.

it is now 3:19 in the afternoon (Central St. Time) There has been something coming in ...in my OE e/mail (I have 6.0, and dial up)...This "whatever" has been "receiving" since 15 min. until 2:00 (1:45 p.m.)..it is still coming in...
Is their any way that I can purge incoming...I don't know what it is...and don't care what it is....I don't want it anyhow...
I have been e/mailing my sis in Houston back and forth this morning with no problem, and we have just finished on the phone...and it isn't she who is sending me something.

I just want to know what I can do to stop this from coming in...it is tying up my computer for other 3/mails, and I can't send any out until this is finished...

I did shut my computer down...and I got the (yellow triangle with exclaimation point ) saying error...but closed that and shut down anyhow...waited a few minutes then turned the computer back on.....and it started still coming in...

Can anybody help here...please tell me what I can do....aside from pitching the computer out the window.


P.S. it is now 3:27 and still coming in.


Read other 14 answers

I followed the following steps on windows 8

1. Everything working I can ping Google
2. Create new incoming vpn network
3. I can no longer use DNS pings to outside addresses don't work although the router still seems to be the DNS server and I can use DNS from another machine on the network including from a vm running on the same machine
4 nslookup to internal and external addresses give a no response from server error
5 Delete the vpn connection and everything works again

My network settings for the pc are all automatic (although I have tried statically setting the ip etc as well)
The settings for the VPN are simply no tcpv6 tcp 4 has a range of ip addresses

I can connect to the VPN from an external network

I have tried turning off the windows firewall but this had no effect nslookup still failed

Any clues how to fix?

Read other answers

Due to lack of funds I've reverted to dial-up and am wondering if I can set up my lap top to accept incoming phone calls while I'm online. Using a Velocity Micro, with Windows XP, and I'm NOT the brightest bulb in the package, so any help should be explained as if talking to a 53 year old beginner intermediate type, thanks. stancusso

A:incoming calls?

Read other 6 answers

my zone alarm has blocked several incoming and outgoing connections.
here is my hjt log:
Logfile of HijackThis v1.99.1
Scan saved at 1:12:21 PM, on 7/2/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\Windows Defender\MsMpEng.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
c:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\Program Files\SpywareGuard\sgmain.exe
C:\Program Files\SpywareGuard\sgbhp.exe
C:\Program Files\Yahoo!\browser\ybrwicon.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\Mozilla Firefo... Read more

A:help, too many incoming connections

Hi, Welcome to TSG!!

Run HJT again and put a check in the following:

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://ca.red.clientapps.yahoo.com/c...search/ie.html
R1 - HKCU\Software\Microsoft\Internet Explorer\SearchURL,(Default) = http://ca.red.clientapps.yahoo.com/c.../www.yahoo.com
R1 - HKLM\Software\Microsoft\Internet Explorer\SearchURL,(Default) = http://ca.red.clientapps.yahoo.com/c.../www.yahoo.com
O2 - BHO: Nick Aracde Toolbar - {4E7BD74F-2B8D-469E-9EB4-FE6FA694B13E} - C:\PROGRA~1\NICKAR~1\NICKAR~1.DLL (file missing)
O3 - Toolbar: Nick Aracde Toolbar - {4E7BD74F-2B8D-469E-9EB4-FE6FA694B13E} - C:\PROGRA~1\NICKAR~1\NICKAR~1.DLL (file missing)

Close all applications and browser windows before you click "fix checked".

Read other 2 answers

Get your VM's Prepped because build 10122 is coming for fast ring testers and its the 2nd Insider Preview.

A:Incoming Build!!!

Not bad... internally MS is @ Build 10125


Read other 8 answers

Hi, techguys!

I need help with the following problem. I'm on a LAN provided by my ISP, but the LAN is very hostile (when I first connected two years ago, I got hacked within something like 15 minutes). I have closed all my ports by disabling all kinds of Windows XP services (Home) and I installed Jetico Firewall, which I think is really good. I log everything, allowed and blocked traffic.

Jetico allows one to see ARP packets going out and coming in. And that's where my problem lies: Almost nothing goes out, but every second, I get about 8 ARP packets! That seems like very much. No addresses on this LAN are trusted. I have disabled NetBIOS and even uninstalled Microsoft Client from the Internet Connection.

I was wondering if there is a way to somehow regulate this traffic. I've tried blocking the packets, but the Internet connection went dead.
Isn't there a way to limit this traffic? Maybe by hardcoring the gateway's and DNS servers' MAC addresses? If yes, how do I do that?
In the command line it says that my gateway MAC is dynamic. Does that mean I have no control over this crazy stuff?
And how can I determine the MAC of my DNS servers?

I have Ethereal installed, but I have no idea whatsoever what to do with it besides watching all those packets come in. I was alarmed by the administrator of firewallleaktester[dot]com that when I registered there for the mailing list, his logs showed some specially crafted packets that 'could only be t... Read more

A:Incoming ARP flood

Read other 6 answers

So I got the above IP in my firewall as an incoming connection blocked.
It resolves to helionresearch dot com
Anyone have anything to add as to what this might have been about?

A: incoming connection

Hi bass740 From what I see, HelionResearch.com is the website of a Marketing Company that offer advertising and performance monitoring solutions for other companies. My guess is that some website(s) you went on uses their services and when loading that page, it tried to load content from HelionResearch.com as well, but your Firewall blocked it since it wasn't needed or unwanted. At one point, it almost looks like Adware or browsing tracking.

Read other 19 answers

I keep having incoming blocked ip messages popping up from my malwarebytes. I have run scans with Avast and Malwarebytes and nothing is showing up on the scans. What should I do to make these go away?

A:Incoming Blocked IP Help

That is a sign that malwarebytes is doing its job and protecting you from attacks, if you like you can disable the pop up in the options menu.
If you like we can have a little look see while you are here, make sure you don't have anything obviously nefarious....
Lets scan with ESET Online Scanner.
Please right-click your internet browser shortcut on the desktop or start menu and select Run as Administrator from the context menu.
Follow this link or right click and "copy link location", then paste the link into the address bar on your newly opened browser instance
Note: If using Mozilla Firefox you will need to download esetsmartinstaller_enu.exe when prompted then double click on it to install.
Firstly, Accept the Terms and click Start

Click Enable detection of potentially unwanted applications and click Start again.

ESET will then download updates, install and begin scanning your computer. Please be patient as this can take some time.
When the scan completes, click List of found threats. Note: If no malware was found you will not get a list.

Click Export to text file and save the log on your desktop. Then click the Back button.

Check Uninstall application on close and Delete quarantined files, then click the Finish button.

When you click finish the browser will not close but will offer you ESET products. Be aware the scan has actually finished and you need to close t... Read more

Read other 22 answers

Newby with servers here. ~5 years ago, then IT blocked IPs busting in on the Anonymous FTP service, creating 'locked' folders and storing? who knows what. He then set an option to block those series of IPs, most of which were coming from China with the IPs of: 20x.xxx.xxx.xxx

Today, we need to allow a client to access our anonymous FTP service and, unfortunately, they have an IP starting with 206.28.xxx.xxx

Have searched all areas that "I'm familiar with", but I need help to dig deeper for blocking/unblocking incoming IPs..

Read other answers


I have an iPad that I use to remote desktop to a Windows XP Pro machine using VPN. All works fine every time. I also have a Windows 7 Pro machine that I want to use instead of the XP one, but can't get a reliable VPN connection.

The VPN connection appears to work every time, but I can only get the remote desktop connection about half the times I connect. Sometimes disconnecting VPN and reconnecting works, sometimes not.

Any ideas (in plain English...)???


A:Unreliable Incoming VPN

I'm experiencing 'no internet' but connected problems with my Windows 7 VPN. VPN Sucks. I'm finding it's unreliable.

Read other 1 answers

Most of the incoming mail messages are, for unknown reasons, going into the deleted folder rather than into the inbox. This began about two weeks ago when I upgraded to Norton 360 Premium. Maybe this has nothing to do with that, but everything was working prior to it. I am using MS Outlook 2003. I have not made any changes to my Outlook. How do I correct this annoying situation.

A:Incoming Emails

Yes, it could be a coincidence, but I would first suspect Norton. If you can't find any Norton options relative to handling incoming mail I would uninstall it, at least long enough for testing. Symantec has a very good Norton Removal Tool, and that link also gives instructions on how to make sure you have the Product key saved for a later re-installation.

Read other 1 answers

A friend has a problem with his internet connection. While online a message pops up saying 'You have just ignored an incoming call', and his connection is lost. On checking he has not had any calls. What could be causing this, and how can it be solved. Cheers.

A:Incoming Call

Guessing its a dial-up connection?

If he has "call waiting" enabled on the phone line it puts a "beep" on the line when a call is waiting (when the line is otherwise engaged, in this case with an internet connection).

Thats what the modem will be detecting I would guess. If the caller then hangs up, the beep while they were waiting can often be enough to disrupt the connection.

How does he know that nobody was calling? If they had given up and hung up?

Read other 3 answers

I have had a web-based email account (starspath) for two years and have had no problems until recently. For whatever reason I can send email, but can't receive any at all. I have not exceeded storage capacity and never open suspicious attatchments. However, I do suspect that may account may be contaminated from some unknown source. It's not a computer issue since I have the same problem whether I'm using my computer, a friends, or a public computing center. When I send messages to this account from an alternate account, they immediately return as "undeliverable", "couldn't find mail exchanger or IP address". I forwarded this problem to the starspath tech support, but inquiries are not exactly acknowledged in a timely manner if you know what I mean. I recently entered the job market (again) and depend on this account as a contact source from prospective employers. Anybody have a solution for me??
Thank You!!

A:No Incoming Mail

To be honest this sounds like something your mail provider will need to sort out. In the meantime you could set up an alternative email address and then set up a rule in the problematic address to forward on to the new address. Then when you want to receive you can receive from the new address.
To be honest I dont think this will work, but its the only thing I can think of and you sound quite desperate

Read other 1 answers

since using a modem router to use the net i can send e-mail but cannot receive. i keep getting asked for my user name and password. i am using wanadoo broadband. i can receive mail using the online mail at the wanadoo home page so my account is still active

A:no incoming mail

check the email settings have been entered properly in your program

Read other 1 answers

Hello there,

I am making a Remote Control program like Teamviewer in VB.Net using the TCP protocol and it works fine locally (in LAN), but nobody outside of my network can connect to my computer. I've tried to add exceptions to all TCP ports and I've tried to totally disable the firewall, but there still is no connection. Why is this+how do you fix it?


A:How to allow *all* incoming TCP connections

How are users attempting to connect?

How does your app handle NATs?

How does your app handle brute forcing the credentials needed to connect/control?

Read other 9 answers

A friend of mine got some malware on her 2-month-old Win7 laptop, so she went to Bellsouth/Yahoo customer service. They tried to sell her a $450 package for 3 years of virus cleanups. Part of their sales pitch, while they were logged into her computer, was to pop up a list with a bunch of IP addresses on it, claiming that these were the incoming connections for the last 24 hours -- "...and notice how many of them were from outside the US."

This sounds bogus to me. I'm not aware of anything on Win7 that does incoming IP logging on a new, only-slightly-tuned system.

What do you think? Was this real, or fake? (If real, I really need to know how to make use of that log myself.)

Gear in SoFla

A:Win 7 logs incoming IPs?

Sounds like a scam to me, how did they receive the call and did they have a very heavy South Central Accent?

Read other 1 answers

Hi...How do I set-up E-mail notification so that any new E-mails that are sent to me while I'm viewing previously sent E-mails, appear on my inbox list? I have to exit my E-mails and then re-enter to become aware that there are new E-mails for me...............Thankyou........Dave


Not sure you can do this but i need to know what you are using as an e-mail client 1st...

Read other 5 answers

Hello, guys how are you doing? i am trying to send e-mails using the Outlook express but it gives me the following Errors and the error message says- " The host 'http' could not be found. Please verify that you have entered the server name correctly. Account: 'http', Server: 'http', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D"(Moderator edit: topic moved to more appropriate forum. jgweed)

A:Incoming And Out Going Mail

Is this an old, establish account that has worked in the past, or is it a new OE account you have just set up?

Read other 3 answers

Hello Every One.
I want to change the notification sound on incoming mail. There surly must be a better sound than ​I'm getting at the moment. arram,

A:Incoming mail

Which browser are you using ?
IE 10 ?

Read other 6 answers

Sir, I cannot receive mail through Outlook Express. Error code says "Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', Server: 'pop.mail.yahoo.com', Protocol: POP3, Port: 995, Secure(SSL): Yes, Error Number: 0x800CCC0F".

Kindly help.

Thanks and regards


Read other answers

hi this is somewhat of an emergency, there has been a ton of technically related issues that persist. my inbox typically is in reciept of hundreds of unique mail from regular clientele and visitors to my website but for some time now inbox is at 0 new mail. im highly sought after in my field, ive attempted to contact hundreds and hundreds of technical experts and get no replies please advise as to any resources that repair communication online. there has to be resources for victims of email theft, technical engineers or consultants versed in wired communication that could stop what ever is blocking incoming data any advise or reccomendations would be much appreciated

A:no incoming data

 What email service are you using? 

Read other 1 answers

Hi, how can I make the incoming e mails in Gmail look darker? Thank you

Read other answers

I have XP and Outlook Express 6 --all at once the incoming mail switched from the long used default format to plain heavy block letters and no way to switch to pictures or move to listed sites--the upper portion of the window works perfectly and I can't locate the window to switch the bottom back -I now have many e-mails I can't read properly and can't toss them-

A:incoming e-mail

Hi wfl80

You have the Preview Pane enabled?
If you want to close the Preview Pane in Outlook Express:
View > Layout
Uncheck: Show preview pane
Apply, OK to save and close.
What Font is showing for Outlook Express?
Tools > Options > Read tab

These are my settings in Outlook Express:
Font settings
Western European
Default Encoding:
Western European
If the above doesn't help, try creating a new Identity in Outlook Express to see if the font problem persists in the new Identity. If it doesn't, you can migrate to the new Identity and Import all your messages to the new Identity.

Create a new Identity:
File > Identities > Add New Identity
Name the Identity
Click Yes when asked if you want to switch to the new Identity.
Cancel out of Importing or Upgrading if the option is given.
Recreate your E-mail account.

Send yourself a Test message to verify your account settings are correct and to preview the font.

Let us know what happens.

Read other 1 answers

when on net a box sometimes appears top left of screen saying you have ignored an incming call and disconnects from net when i check there has been no call this sometimes happens only once a night or it can happen over and over

A:incoming calls

do you have call waiting?

Read other 2 answers

So I got the above IP in my firewall as an incoming connection blocked.
It resolves to helionresearch dot com
Anyone have anything to add as to what this might have been about?

A: incoming connection

Hi bass740 From what I see, HelionResearch.com is the website of a Marketing Company that offer advertising and performance monitoring solutions for other companies. My guess is that some website(s) you went on uses their services and when loading that page, it tried to load content from HelionResearch.com as well, but your Firewall blocked it since it wasn't needed or unwanted. At one point, it almost looks like Adware or browsing tracking.

Read other 19 answers

win xp - dial up I have a program on my lap top that tells me when a call is coming in (I didn't put it there) would like to have it on my desktop computer. Any answers?

A:incoming call

Hello ; Perhaps this Link will help ?


Read other 1 answers

Hello, ive been trying to get some information about R600, but internet is confusing xD
how would it be?
how much would it cost?
And ive heard that would be better than the G80, cause of the 512bits 120 GB/s rate transfer, 64 unified shaders, etc, etc....but how much expensive? xD

Greetings from Chile

A:what do you know about the incoming R600?

The X2800XTX is going to be ~$600US. It is better than the G80 with 64 Unified Shaders doing 4 ops per clock so theoretically 256 Unified Shader ops per clock cycle. It will run at 700/2400 and will have 153.6GB/s memory bandwidth. It should be about 1.5x more powerful than G80. G81 should be a little more of a competition, but the R600 should still be better than the G81 aka 8900GTX.

Read other 2 answers

can anyone help me with a problem i have with incoming audio.when using the pc to pc voip i can talk normal and my contacts can hear me in a normal voice but when they talk to me their voices are distorted this also happens when i use media player 11 to listen to dvds or cds.

A:incoming audio

something is wrong with the sound or the mic you are using.

Read other 3 answers

We have some obstruction stopping our incoming emails and now have 1200 in backlog.
We use Outlook Express 6 . How can we remove the blockage please?? :

A:Block in incoming emails

Read other 7 answers

I am a gamer! and egar to work in game designing!

i am going to rebuild my rig with this system!

:Model - Gigabyte GA-MA78LMT-S2
Form Factor - Micro ATX
Sockets - AM3
Supported CPU - Phenom II / Athlon II / Sempron 100 Series
Chipset - AMD 760
RAM Type - DDR3
RAM Bus (MHz) - 1333/1066/800
RAM Max. (GB) - 8
RAM Slot - 2240pin
PCI Express x16 Slot - 1
SATA Port - 4
FSB Speed (MHz) - 2600
IDE Port - 1
Audio Chipset - Realtek ALC888B
Audio Channel - 8
Video Chipset - ATI Radeon 3000
LAN Chipset - Realtek RTL8111D/E
LAN Speed (Mbps) - 10/100/1000
USB Interface - USB 2.0
USB Port - 4
Warranty (Year) - 3
Product id :: 4497

Model - AMD Phenom II X4 955
Clock Speed (GHz) - 3.2
Core - 4
L3 Cache (MB) - 6
L2 Cache (MB) - 2
Lithography (nm) - 45
Warranty (Year) - 3


Model - A DATA
Capacity(MB) - 4096
Type - DDR3
Bus Speed(MHz) - 1333
Number of Pin - 240
CAS Latency - 9
Voltage - 1.5V
Warranty - Product Life Time

ATI Radeon? HD 4770
512MB, GDDR5
640 Stream Processors
ATI Stream Technology
51.2 GB/s Memory Bandwidth
ATI CrossFireX? Technology (up to 2 GPUs)
PCI Express 2.0 x 16


My Current Display: Greatwall 1440X900

Should i attach a PSU with this?
iS this okey for budget 450$?
Is this Okey for GAMING?
is this Okey for Unreal Development Kit?
is this okey for 3D Studi... Read more

A:This is my new system Incoming this month.. How is this RIG?

Manly the one thing that will hold you back in gaming on this build will be your video card. Other then that it should work great with UDK, and StudioMax. Id make sure to have a 650 watt power supply and upgrade the video card down the line if you want to run your games a high rez.

Read other 4 answers

I am using Thunderbird as mail client and working fine.but recently I am sticking on a problem that last week I had send a mail to my three friends.A couple of my friends got the mail successfully but unfortunately the third one got the mail in a corrupted format like in the sense the words and sentences spread out over the sheet in an incorrect format. So that I had tried to send the mail again and again but unfortunately he is getting the mail in the same corrupted format. But the other two friends forwarded that mail to the third one, then he got the mail in the original format.I wonder how this happens?.Can anybody suggest a solution?:

A:Incoming mail problem

Hi sijumon,

Check with your friend if he is set up to receive emails in HTML format. If he isn't that would explain the problem. You'd need to send him emails in Plain Text format.

You can select the format via:-

Tools > Account Settings > Composition & Addressing > Compose message in HTML format (tick or un-tick)

Read other 3 answers

I am using OE at present. When I receive the messages, the dialog box shows total message size and new meesage size on server. Somehow I have become very used to this information. But this does not seem to be possible in Thunderbird. Is it possible to get such a feature in Thunderbird?

Read other answers

I was using gmail to stop spam in hotmail - and I decided I did not like the setup - would rather my mail go and come from hotmail. I deleted gmail (within Windows Live Mail) but my mail is still coming in through gmail on the web.

How can I get hotmail working properly so the mail comes through it?

A:[SOLVED] Incoming hotmail

Anyone who has your Gmail address will send you Email through Gmail. Anyone who has you Hotmail Email account will send you mail through Hotmail. Send everyone on your Gmail contacts list an Email telling them to write you at your Hotmail address.

Read other 6 answers

Hi I am somewhat experienced in computers, but not very hardcore.

Anyway, my PC's onboard sound card recently stopped working, so I got a new (budget) sound card, a CMI8738/C3DX PCI Audio Device as listed on the device manager. I have disabled the onboard sound card (High Definition Audio Bus) in the Device Manager (it now has a little red X on it).

The output sound is working fine, but everytime I try to use the mic, the whole computer hangs.

Does anyone know what the problem is?

Thank you.

A:Incoming audio causes crash

Read other 7 answers

Could you please explain what's an " Incoming echo request" ? ( Path = Windows Firewall ..... Advanced tab.... ICMP settings) . Should the box be blank or ticked ?

Thanks in advance,


Read other answers

I am trying to use the Windows 2000 Fax Service. I can send a fax but can not receive. When I make a voice call to the fax number I just hear the ring tone but no modem answer. The modem is an Intel HaM Data,fax Voice.

With BitWare installed I can send & receive.

The only reason to use the Win 2000 offering is that my other software, CA Bitware, and Symantec TalkWorks dont seem to be compatible with my HP 1444C scanner - or at least they don't appear in the scanners "send to" choices. Help appreciated.


Read other answers

i need to know my incoming and outgoing server, but i have no clue what this is, it's for email.


Read other 9 answers

This is the message I recieve when I'm trying to open my email:
"Message could not be delivered. Make sure there is sufficient memory and disk space and that the messge store is accessible, then try again."

A:Not enough memory to allow incoming emails.

What email program do you use?
How much hard drive space do you have?
What operating system?
How much RAM?
Have you ever had this problem before?

Read other 2 answers

What causes email to duplicate itself? Is it a Server problem or what? This morning 8 of my incoming messages have quadruplicated themselves. The others are normal. I've had this problem occasionally, off and on, but usually only duplication and not quadruplication. Chuck ([email protected])

A:Incoming Email duplicates Itself!

Read other 7 answers