Over 1 million tech questions and answers.

Is it possible to change a touch display to a normal display...

Q: Is it possible to change a touch display to a normal display...

Is it possible to change a touch display to a "normal" display in a HP Pavilion ProtectSmart 13-a187no ?

RELEVANCY SCORE 200
Preferred Solution: Is it possible to change a touch display to a normal display...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Is it possible to change a touch display to a normal display...

Hi @Karsten2,I hope you enjoy your visit to the HP Support Forums. I understand you are have a question about the touchscreen. I will be glad to help you. You can disable the Touch screen by Press the Windows logo key + X.Select Device Manager from the list.Click the little arrow next to Human Interface Devices to expand the list.Click the touch screen driver (in my case, NextWindow Voltron Touch Screen).Right-click, and select Disable from the list.Click Yes on the dialog box that asks if you are sure you want to disable the touch screen driver.Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below! Thanks.

Read other 1 answers
RELEVANCY SCORE 90.4

I have Dell Inspiron 5547 laptop (Touch Screen, 15 inches, 16 GB RAM and i7 4th Gen processor, Out of Warranty). Some days back, suddenly the display went dim and anything is hardly visible. After some initial investigation, the display chip (may be VGA or LED display chip) on the motherboard appears to be burnt out (may be due to voltage surge). Even the numbers printed on the chip is not readable because of which it is difficult for the local repairing shops to repair this problem.
I think Dell India Service Center doesn't deal with chip level repair and hence replacing motherboard is the only way they can fix this. This will be very costly (considering that the laptop is not under warranty so will have to pay for warranty extension, motherboard replacement and repair service) and time consuming.
Hence, to avoid all this I have come here to seek some assistance.
If there are anyone using the same laptop (Inspiron 5000 series 5547 Touch Screen Display with i7 4th Gen Processor and 16 GB RAM) then could you please take a clear picture of your laptop's motherboard or if you recognize the display chip then only that should be sufficient. In this case, I can read the chip related number from the image and try to repair it.
What are the charges for buying a warranty for the laptop, motherboard of my laptop and repairing charge? 

Request your response and help.

Regards,
Rohit Kumar

A:Display Issue - Dim Display for Dell Inspiron 5000 (Model 5547) - Touch Screen Display with i7 4th Gen Processor and 16 GB RAM

You'll have to call Dell about the possibility of a warranty extension;  in the US, it's sometimes possible but will likely run over $300 -- or about what a board replacement would cost.
If you're getting video, the GPU is OK -- and it's more likely the power circuit to the backlight that's bad.  It'll likely cost as much to repair as to replace the board -- though you'll still be putting $300-400 into an out of warranty system, so replacing the system may be a better idea (if you do this, consider buying a 3-year warranty with the next system).

Read other 1 answers
RELEVANCY SCORE 77.6

The display is plugged in and touch is registered - except the touch registered on another monitor, not the S230tm. I have two build-in touch displays on my device (it's a HP Sprout Pro), and the S230tm is a third screen. However, the touch from the S230tm gets registered on the first/main display. The first displays still works correctly with full touch functionality. The location and interaction is correct , it's just the display that is wrong - I can drag and click items on my FIRST monitor by touching the THIRD monitor. I found that some have used Tablet PC settings to configure the correct monitor, but... I can't successfully touch the display when the "touch display" message comes up on the S230tm as the touch is clearly registered on the first display. I've updated the driver from the original 1.0.0 to the recommended 2.0.0RevA, and moving around different USB connectors, to no avail.  

Read other answers
RELEVANCY SCORE 75.6

Hey guys. Yesterday i connected my pc to a TV and today when i want to start up my pc it says "Cannot display this video mode, change computer display input to [email protected] Could you help me with this problem?
 

Read other answers
RELEVANCY SCORE 74.8

I recently bought an E431 (still under warranty) which has a touch display.I would like to replace with non-touch display, preferably swap kind of thing, like trade-in.someone pls help me know the procedure/process.

Read other answers
RELEVANCY SCORE 74

Hi all.
 
I'm planning to buy an X1 Carbon, and I'd like a hint to help me to choose between touch and non-touch display; I'm not planning right now to make a major use of the touch panel, but this could change in the future.
 
Apart from the touch feature, there are other differences between these two options? Image quality? Screen surface, matte or glossy? Thickness? Weight? Battery usage? Other?
 
Thanks in advance for any suggestion.
 
EDIT: Sorry, wrong forum section. Can't find a button to delete. Somebody can kindly move to the right section? Or delete from me? Thanks
 
Moderator note: post moved.

A:X1 Carbon 6th gen display: differences between touch and non-touch (touch capability aside)

Hello and welcome,
 
I have no personal experience with the Carbon series, but the way I read the base spec the touch option is only available with the FHD screen.  I guess that's "other" ...
 
http://psref.lenovo.com/syspool/Sys/PDF/ThinkPad/ThinkPad%20X1%20Carbon%20(6th%20Gen)/ThinkPad_X1_Ca...
 
FWIW,
Z.

Read other 2 answers
RELEVANCY SCORE 74

Hi all. I'm planning to buy an X1 Carbon, and I'd like a hint to help me to choose between touch and non-touch display; I'm not planning right now to make a major use of the touch panel, but this could change in the future. Apart from the touch feature, there are other differences between these two options? Image quality? Screen surface, matte or glossy? Thickness? Weight? Battery usage? Other? Thanks in advance for any suggestion. EDIT: Sorry, wrong forum section. Can't find a button to delete. Somebody can kindly move to the right section? Or delete from me? Thanks

Read other answers
RELEVANCY SCORE 70.4

I have this funny problem:
- I hate silver/light gray finish of non-touch e7440 but prefer it's matte screen over glossy touch screen.
- I like visuals of E7440 touch with it's dark grey and carbon.

Therefore I plan to buy e7440 touch and if I won't be happy with the glossy screen, I would like to retro-fit a standard non-touch matte screen. Is it possible (screen back lids are the same in case of touch and non-touch models) or are there some physical differences between the screens and carbon/non-carbon lids?

A:E7440 touch - can I retro-fit non-touch matte display?

The parts won't interchange between the touch and non-touch screens, no.  They are indeed different.

Read other 4 answers
RELEVANCY SCORE 69.2
A:how to replace my hp 14-r121ne touch display to non touch di...

Hi, You don't need to spend money to swap. Please try the following steps to disable touchscreen. First, go to the device the manager by opening the "Charm Menu" and search for "Device Manager." If you don't see it, change the search filter to "Settings."Once in the Device Manager, expand "Tab." Then find "Human Interface Devices" and expand it.You should see several "HID-compliant device" listings. Some PCs will call it an HID-Compliant Touch Screen, but yours may vary?if you don't have a touch screen option, you may have to try each HID Compliant ____ until one works. When asked if you want to disable the device, select "yes." That's it! The touch screen on your Windows 8 device should be disabled.   You can turn back on any time. Regards.

Read other 1 answers
RELEVANCY SCORE 68.8

Windows 7 EnterpriseSystem does not see or react to external display when connectedNothing displays when connectedExternal display says nothing connectedTried multiple dongles - same results
Other system that include a VGA connector work just fine to same external display.

Read other answers
RELEVANCY SCORE 68.8

Question that I could not find an answer for on Google before I buy. I currently have a Dell 6420 using Win 7 SP1 with a 1366 X 768 display that I have the text set at 125% so I can read it. What display is going to look better on an X1 Carbon if I use that setting, the 2560 x 1440 WQHD IPS LED Display or the 1920 x 1080 Full HD IPS LED Display using Win 7 Pro?

Read other answers
RELEVANCY SCORE 66.8

I just buy Dell Latitude Rugged 7202 and touch is not working in either laptop mode or tablet mode, under Setting and PC info getting  "No Pen or touch input is available for this display" 

OS: WINDOWS 10

Please Help Me

A:Dell Latitude Rugged 7202 touch not working - "No Pen or touch input is available for this display"

Hi ttthai2902,
Thank you for writing to Dell Community Forum.
Please check the link for the troubleshooting steps that you can try:
http://dell.to/2olytdD
Please click my DELL-username and send me a Private Message with the Dell Service Tag number and your email address.
Note: please don't mention the service tag or email id on the public forum as it contains your personal information

Read other 1 answers
RELEVANCY SCORE 65.6

i have an acer aspire 7720 when i turn it on the windows error recovery screen comes on it will open in safe mode with networking and in safe mode but nothing else and only with an external monitor plugged in heeelp
 

A:no display in normal mode

Boot into Safe Mode and uninstall the video drivers.
 

Read other 2 answers
RELEVANCY SCORE 65.6

I am still getting pictures on some websites that are just blank boxes with a small white box and a red "x".

Also, when I power up in the morning, my pc is trying to update the "normal" template in Word.

This pc was a lemon to begin with, it kept seeing my psc2210 all-in-one as a disk drive. Neither Microsoft or Dell could give us any good fixes. My NT manager just kept messing around with the control panel stuff and finally got something to work.

I sure wish one of you had a magic fix for me. Working on this pc all day everyday is so frustrating!

A:Display AND Word Normal

Have you tried downloading firefox and seeing if there is a problem with that browser? That will tell us if its a problem with IE or something else on the computer.

Read other 1 answers
RELEVANCY SCORE 65.2

I have an Envy 23 that was touch/pen capable until only a few days ago.  It now shows "no pen or touch available for this display."  The HID compliant for touchscreen is hidden and cannot install, update, or rollback driver because the hardware is not connected.  I have attempted to rollback Window updates, install Window updates (all), restore to an earlier time when the PC was working with touchscreen, update and rollback drivers, reboot to the manufacturer set up, etc.  I would attempt to calibrate except there is no option for that.  Many of the suggestions require steps that are no longer found on the PC.The onscreen keyboard has even disappeared.   The only suggestions I can find from forums, web searches, and the customer care number is to winkey + X and update the driver in the HID --- No possible since it cannot find the hardware or hardware is not connected.  What hardware?  It is not in the hardware recovery, reboot, search of PC, and I did not buy this separate.  I have looked for calibration options but they do not exist on the PC as far as I can find.I have looked on HP's site for the driver(s) or other options and nothing. Is there a way to get the touchscreen driver, hardware, or whatever is needed fixed?  I purchased this specific for the touchscreen and to lose it kind of defeats the purpose of having it.Thanks 

A:No Pen or Touch Available for this display

Hello, You might want to check if the hardware is working fine by running the diagnostics, follow the document below on how to perform the steps. http://support.hp.com/in-en/document/c03488148 If that passes and since you have already tried a restore, I would suggest you to backup the files and recover your pc. Document mentioned above will help you with that as well.  ***If my post helped, click the White thumbs-up symbol to say thanks******Please mark Accept As Solution if my post solved your problem******Although I am an HP Employee, I am speaking for myself and not for HP***





I am an HP employee

Read other 1 answers
RELEVANCY SCORE 65.2

I bought An Hp Eny x360 with a touch screen display. The touch screen stopped working and when I go to the Pc Properties it says Pen and touch not available for this display. Many People said that the solution was to open device manager and go Human Interface Devices and enable Touch Screen. However i cant find it. What should i Do?Spoiler (Highlight to read)   

Read other answers
RELEVANCY SCORE 64.8

Whenever i run a video it displays brighter than normal, blacks arent blacks, but greys. The preview picture you get from WMV and AVI display in normal true colour, but as soon as i run them, they are brighter youtube videos display in normal colour, but stage6.com videos dont, it happens in both WMP VLC and Winamp. How can i correct the colour, or lower the brightness????

I dont know if it is gamma, brightness or contrast but how do i lower what i need to.

Thanks
 

A:Videos display brighter than normal???

Lowering the brightness and adjusting other things are a function on the buttons on the monitor, different model monitors have buttons for this in different places the best thing is for you to search the monitor make and model number find the manufacturers web site and then the manual and follow the manual.
 

Read other 1 answers
RELEVANCY SCORE 64.8

I am using windows 7. When I go to start up my computer, I get no display but I hear the computer starting normally with no display. Yet, when I start up in safe mode, I get a display. How can I correct this problem so that I get a display with windows normal start? Is there anything that I can do in safe mode to get this display working properly in normal start up?

A:No monitor display with normal startup

In safe mode with networking try updating the driver for video card and monitor.

Read other 9 answers
RELEVANCY SCORE 64.8

Hi there,

So I'm planning on buying one of the new Macbook Pros (can't believe it myself, I love PCs...) and I'm not sure whether to get a glossy display or a normal one. I've always had a normal display but I've seen glossy ones and they seem really good...easier to see everything, things are sharper, videos look better etc. But someone told me glossy displays are bad because they get a lot of glare during the day. Is this true? Or, could someone recommend me one over the other for other reasons? If I buy a normal display, I could also buy one of those plastic sheets to make it into a "glossy" display...seems cheap though.
 

A:Glossy vs Normal Display for Mac Laptop

Wow, APPLE is offering both versions?

GLOSSY displays are not really sharper (IMHO) - they are shiney, and what you see a lot is your OWN FACE!! Every Windows Notebook on the market is GLOSSY - it sucks. Really.

See for yourself in a store.
 

Read other 1 answers
RELEVANCY SCORE 64.8

Dear friends,

I have hp 520 notebook pc with intel core duo and windows7 ultimate build 7600 32 bit installed in it.

But when I boot up, my touchpad and display hang.
Please find the error message.


Code:
mobile intel 945 express chipset family display adapters
Windows cannot initialize the device driver for this hardware. (Code 37)

synaptics ps/2 port touch pad
This device cannot start. (Code 10)
Someone please help me..

Thanks in advance

A:touch pad and display problems!!!

  
Quote: Originally Posted by bobbygeorge


Dear friends,

I have hp 520 notebook pc with intel core duo and windows7 ultimate build 7600 32 bit installed in it.

But when I boot up, my touchpad and display hang.
Please find the error message.


Code:
mobile intel 945 express chipset family display adapters
Windows cannot initialize the device driver for this hardware. (Code 37)

synaptics ps/2 port touch pad
This device cannot start. (Code 10)
Someone please help me..

Thanks in advance



It could be as simple as going to HP and getting a video, and touch pad driver. Try that first

Ken

Read other 8 answers
RELEVANCY SCORE 64.8

I am trying to find ANY information (reviews would be best) on the P50's FHD Touch display. That seems to be quite elusive. Does anybody have experience with that display? I have been using Macs over the past few years and the screen brightness of the P50 concerns me a bit (My 2012 Macbook Air has 354 nits). And the touch display is even a notch dimmer.  - FHD (1920 x 1080) IPS, 300 nits- FHD Touch (1920 x 1080) IPS, 270 nits How happy are you with your touch display? (brightness, colors). Or would you recommend sticking with the non-touch FHD display?

Read other answers
RELEVANCY SCORE 64.8

NO PEN OR TOUCH INPUT AVAILABLE FOR THIS DISPLAY in HP Pavilion 10 TouchSmart Notebook PC - e008AUi format last weekhow can i fix this? and no HID Complaint TouchScreen Driver 

Read other answers
RELEVANCY SCORE 64.8

Hello, I recently bought a HP Envy M7 Smart Touch Energy Saver laptop, after a month of using it I just became so irritated by Windows 10 constantly freezing or apps crashing (due to compatibility).  So I Installed Windows 8.1 In order to maintain the touch screen interface in the laptop, after I installed windows 8.1 I downloaded all of the drivers available for my Laptop, after updating every single aspect, my Windows System Information states "No Pen or Touch Input", I cannot seem to find any touch screen drivers in the HP website and there are some drivers in Device Manager with an exclamation mark as "Unknown Devices", I've enabled view hidden devices and there's no sign of any touch screen driver. I made a component test in UFI to see if there was a faulty with the touch screen and there's not, it's just a driver compatibility issue. Any help? Please and thank you

A:No Pen or TOuch Input is available for this display HELP

Hi @faviodelgado, Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community! I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY m7 Notebook and the Touch Screen not working correctly. Hereis a link to help troubleshoot the Touch Screen in Windows 8. Here will show you how to check if your Touch Screen is enabled: Press the Windows logo key + X.Select Device Manager from the list.Click the little arrow next to Human Interface Devices to expand the list. Click the touch screen driver. Right click to confirm that it is enabled. Please let me know how this goes. You can say thanks for trying to help by clicking the Thumbs Up below! Thanks.

Read other 3 answers
RELEVANCY SCORE 64.4

Hello,

I've been having problems with my computer starting yesterday. There is a program that wants to change my registry information, my display properties, and there are a bunch of popups when I go to the internet. Any help will be greatful! Thanks!

Logfile of HijackThis v1.99.1
Scan saved at 12:52:50 PM, on 5/24/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\Program Files\Digidesign\Drivers\MMERefresh.exe
C:\Program Files\Diskeeper Corporation\Diskeeper\DkService.exe
C:\WINDOWS\System32\DVDRAMSV.exe
C:\WINDOWS\ehome\ehSched.exe
C:\Program Files\Common Files\EPSON\EBAPI\SAgent2.exe
C:\Program Files\ewido\security suite\ewidoctrl.exe
c:\program files\mcafee.com\agent\mcdetect.exe
c:\PROGRA~1\mcafee.com\agent\mctskshd.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\wanmpsvc.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\system32\TPWRTRAY.EXE
C:\Program Files\TOSHIBA\TouchED\TouchED.Exe
C:... Read more

A:Spyware wanting to change my registry information, change display properties, popups!

Do not create a new thread for the same issue. Your other thread has been deleted. A 24 hour period must pass before a bump is allowed.

Please read this thread:

http://www.techsupportforum.com//sec...ijackthis.html

Please subscribe to this thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

Before begining the fix, read this post completely. If there's anything that you do not understand, kindly ask your questions before proceeding. Ensure that there aren't any opened browsers when you are carrying out the procedures below. Save the following instructions in Notepad as this webpage would not be available when you're carrying out the fix.

It is IMPORTANT that you don't miss a step & perform everything in the correct order/sequence.

You have mutiple infections, and this will take several passes to get it all.

---------------------------------------------------------------------------------------------



Download the file - combofix.zip
Within it, double-click on combofix.exe & follow the prompts given
Depending on the severity of your infection, it may reboot your machine 1-2 times.
When it's done, it shall produce a report which you should post back here. Should it not open, it it located at C:\combofix.txt

Also post a new HJT log.

Read other 1 answers
RELEVANCY SCORE 64.4

Hi everyone, thanks for looking.
Im running into a particular problem that I cant seem to find the reasons or the settings.

I watch HBO GO (i have a valid subscription) on my Windows 7 Home laptop and use an HDMI cable to connect my TV.

Scenerio 1:
If I leave the close the lid power option on hibernate, I must leave the laptop open and, when I connect the HDMI the TV, it becomes my monitor and I view as the monitor and watch anything full screen no problem.

Scenerio 2:
I change the power option on the lid close to "do nothing". When the HDMI cable is hooked up, if the laptop is open it uses the laptop display, if its closed it displays through the HDMI/TV. This is perfect and exactly what I want.
I can watch as the monitor no problem HOWEVER, if I choose full screen, I get gray borders and the "Full Screen" is not full and just centered.

I can not for the life of me figure out why and Im going crazy.
Does anyone know why the power option would have an effect on this and what settings I could change?

Many Thanks in Advance!!!

Max
 

A:External display settings change when Power options change?

Check to see what resolution your laptop's display is at, what the external TV resolution is when you connect it to your laptop, and MAYBE what resolution the videos you're watching are. This just sounds like a resolution issue. If the TV is at a larger resolution than your laptop's resolution, change the TV's resolution to the size your laptop is at. Then try watching a video to see what happens. Hope this helps.
-Lance
 

Read other 2 answers
RELEVANCY SCORE 64

Good evening,
My problem started over the weekend. I turned on my computer, noticed it to be running a little funny but thought it was due to the fact I just took it out of sleep mode. I opened firefox and I got redirected. I knew that was not normal. I quickly ran a malware software and virus program. Deleted some files, restarted. When I went to restart, Microsoft updated Windows 7. No biggy. When I went to turn my computer back on my display had white lines all over the screen and I could not load into Windows normally, only safe mode with networking.

I system restored to before the updates, and nothing.

I am a little lost on what I should do. I keep getting an add for Java to install, which I deleted a couple of months back.

I don't know if this is a display driver, graphics card issue or a virus problem. Any help would be wonderful.

Here are my specs:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz, Intel64 Family 6 Model 26 Stepping 5
Processor Count: 8
RAM: 8183 Mb
Graphics Card: NVIDIA GeForce GTX 470, 1280 Mb
Hard Drives: C: Total - 122001 MB, Free - 2810 MB; F: Total - 953866 MB, Free - 278183 MB; G: Total - 476936 MB, Free - 441806 MB; H: Total - 953866 MB, Free - 840337 MB;
Motherboard: ASUSTeK Computer INC., P6X58D-E
Antivirus: None

*I thought I had Ad-Aware anti-virus installed but its not showing up.

Thank you for your time and... Read more

Read other answers
RELEVANCY SCORE 64

Hi, yesterday I noticed a crack in my laptop's screen. At first, my laptop was working fine, but after a while it began to detect input in the area where the crack is located instead of where I was trying to direct the curser (this occured not only when touching the screen but when using the trackpad as well). My laptop is also slow to process new input. I thought about disabling the touchscreen in order to use my laptop for now, but I cannot find the option in order to do this, and my laptop's slow processing of input is making this extremely difficult.  Would I be able to have this repaired?If so, how much would it cost?For now, what can I do in order to use my laptop?  

A:Screen cracked, display is normal, but it is glitchy and slo...

Use it as a desktop CPU with an external monitor, keyboard and mouse attached. It can be repaired. Anything can be repaired. Provide the full model number and we can tally up the cost of the parts. 

Read other 1 answers
RELEVANCY SCORE 64

Hello friends,
Pls help.
I use WIN XP Pro and Firefox 2.0.0.3
All of a sudden my screen display is cut/shrunk. the bottom half is not showing fully. About one quarter is missing. Pls see the attached image and suggest solutions to bring it to full display/screen. Thx a lot buddies. Cheers
 

A:Solved: screen display is not normal, it has shrunk

Close your web browser then put your mouse cursor on the edge of the Taskbar (you should see the cursor change to a double arrow). Hold down the left mouse button and drag the Taskbar down to the normal location.
 

Read other 1 answers
RELEVANCY SCORE 64

Dear Team, After  2 day of usage i found that touch screen is not responding. i had complaint on croma on 3rd june 2018 and  their responded me that lenova team is going to help me on that and their put a mail on 3rd june itself on "[email protected]" and after two day i had given a call on  help line no 18004197555  and thier assist me on the same day through remote access and their told me its a software error we ar going to solve this and if the same thing raise we are going to replace the LAPTOP  and after that display  touch get start working normally and after 10 day the same issue raised once again on 13 june 2018 and then once again i conntact to help line no and their aisst me and told we are going to diagnosis system and after that their once again troubleshoot the laptop and give me instruction to backup my data so their can format the system and after that ther do the samething and once again display touch get working normally now today same issued  on 16 june 2018 raised and touch is not working so what should i do and i want to know about the policy if the same issuse raised 2 or 3 time  with in 19 day so what should i do and i want proper SOLUTION  on my  issuse and At that time while taking a laptop croma person  as told me clearly lenovo as a replachment policy  within 7 day if some issuse raised their going to replace the laptop is TRUE OR NOT   KINDLY HELP ME WITH THE I... Read more

Read other answers
RELEVANCY SCORE 64

Hello, My laptop screen (common) is in trouble, I can still use it, but I want to replace it with a touchscreen, is it possible? Thanks

Read other answers
RELEVANCY SCORE 64

While viewing gmail on my touch, I am no longer able to manipulate the screen laterally to read email that is not wholly contained within the screen. If I select a hyperlink which opens in another window, I am able to manipulate the screen back and forth. This seems to be a recent problem. I've checked the different settings and can find no adjustments that help. This occurs whether I use the specific gmail icon or Safari browser to access gmail.
 

Read other answers
RELEVANCY SCORE 64

I have a problem with my p.c. when you turn on its only blank screen no display and not goin to lenovo logo. But if you choose or press the button selecting the hdmi av pc or screen setting there is display.  Thanks for who can help.

Read other answers
RELEVANCY SCORE 64

Tonight I was doing work and my Lenovo U430 Touch fans all of my applications froze. The mouse and keyboard also went unresponsive. After waiting a few minutes I tried to hard reset using the power button. I tried this multiple times and the computer would not shut down, even holding the power button for up to a minute. The display still shows the time when it froze, it would not recognize when the charger was plugged in/out, or caps lock turned on/off (light under key). When plugged into HDMI nothing appeared on the TV. I can still hear the fans going a bit louder than normal. Does anyone have any suggestions? Currently waiting for the laptop to die because I cannot remove the battery (easily).  Any input or thoughts about what this could be would be appreciated. 

Read other answers
RELEVANCY SCORE 64

I just upgraded to Windows 7 Home Premium (x64).
I have two monitors: a 24" Dell 2407WFP-HC, which is just a standard, non-touch monitor, and a Wacom Cintiq 21UX, which is a pen-enabled display.
I've got two issues, which may be related.
The Wacom is pressure-sensitive, but in Photoshop the pressure-sensitivity isn't registering. The lightest press creates a line with the same thickness as the heaviest press.
Also, every press results in the little swirling circle Tablet PC thing, which wasn't the case back when I was using Vista. In Vista I would get that only the first time I pressed the pen to the screen.
The problem seems specific to Photoshop, as I do get pressure-sensitivity in Corel Painter.
I'm not sure if this is the cause of the issue, but when I go into the Tablet PC Settings in the Control Panel, on the Display tab under Display Options there's a drop-down menu listing both monitors. When the Dell monitor is selected it says "Pen Input Available" and gives me a Calibrate button. If I choose the Wacom, it says "No Pen or Touch input is available for this display," and the Calibrate button is greyed out.
If I click the Setup button under Configure (still on the Display tab), both screens turn a light grey and the Dell screen shows a message saying "Tap this screen with your tablet pen to set it as the Tablet PC screen," with the option to hit enter to move the message to the other display. I do that, then tap the Wacom,... Read more

A:Windows 7 Touch/Pen Display Issues

In case anyone is interested...
Which monitor is listed as being Pen and Touch enabled depends on which one is set as primary. Changing it didn't resolve my Photoshop problem.
However, I took a shot in the dark and disabled "Pen Flicks." That solved the Photoshop issue.

Read other 2 answers
RELEVANCY SCORE 64

Can the Dell XPS 15 9550 w/ 4K Touch Display be configured with both a PCIe SSD and a 2.5" drive?  Dell Chat Support says "yes", but I have also read that the 4K Touch Display requires the 84WHr battery which extends to fill the space of the 2.5" drive. At 4:44, in the YouTube video below, I think we see that there is no room for a 2.5" drive. But, maybe Dell has a different model option that supports 4K Touch and dual HDD. This question has probably been posted before, but I didn't find by searching.

A:Dual HDD in XPS 15 9550 w/ 4K Touch Display

If you want the UHD screen, the larger 84 W-Hr battery is mandatory - you do indeed lose the 2.5" drive bay.  The only way to increase internal storage in this model is with a larger capacity M.2 PCIe/NVMe drive.

Read other 1 answers
RELEVANCY SCORE 64

I want to know if it is possible to upgrade my T570 (20jw006) from FHD to UHD (+touch if possible), if it is possible what do I need. My screen already broke so I'd like to give 4k screen a shot. I want to know what I'll need because in my country, the technicians will give a higher price once they know you have no idea what you need.  I also want to know if it's possible to reach Lenovo Technical Support in Nigeria, I've been trying to reach them for a month now Thanks

Read other answers
RELEVANCY SCORE 64

Good morning: I'm trying to know if there is a Thinkpad model with touch and matte screen. In my company we have several Thinkpad:Yoga S1, tactile and matte, with ghosting problems.X 1 Yoga, touch and glossy. I'm looking for a matte display quality as the one existing in other models, not touch, such as T480S.It is or has been a touch Thinkpad model with a matte screen quality? Computers with touch screen you can configure in the Lenovo shop but usually it is not clear if it's matte screen.How can I find models with these features? Very thanks

Read other answers
RELEVANCY SCORE 64

I have hp slate 6 voice tabI need display+ touch screenAnd I am from India andhra pradash kurnoolI asking all mobile shops no have any oneIs a parts please u can help me??

Read other answers
RELEVANCY SCORE 64

I have purchased Gateway ZX 4800-2 from the Best Buy.
The display item at the store was working perfectly and I was be able to use with my fingers. However, the one I have purchased has problem. On the computer properties, it says "No Pen or Touch Input is available for this Display" I do not think the problem is about hardware. But windows 7 might not accept something. Can anyone help me about this problem. System has wireless mouse and keyboard and only one small received came with system where you plug to the usb slot. System has Windows 7 OS on it.
Also, at the device manager, there is something with yellow mark named TACTION. I could not find driver for this name. I dont know what kind of driver it is and I even do not know what is TACTION is.

A:"No Pen or Touch Input is available for this Display

  
Quote: Originally Posted by reachist


I have purchased Gateway ZX 4800-2 from the Best Buy.
The display item at the store was working perfectly and I was be able to use with my fingers. However, the one I have purchased has problem. On the computer properties, it says "No Pen or Touch Input is available for this Display" I do not think the problem is about hardware. But windows 7 might not accept something. Can anyone help me about this problem. System has wireless mouse and keyboard and only one small received came with system where you plug to the usb slot. System has Windows 7 OS on it.
Also, at the device manager, there is something with yellow mark named TACTION. I could not find driver for this name. I dont know what kind of driver it is and I even do not know what is TACTION is.







Hi Reachist! Welcome to SevenForums! Try right-clicking on TACTION and going to properties. Then to the Details Tab and from the drop-down menu choose Hardware IDs. There'll probably be two. Post them back and I'll try and help.

Thanks,
ZeshanA

Read other 5 answers
RELEVANCY SCORE 64

Hello,I have a u330 touch with broken display. When looking for parts to replace it, I stumbled upon a higher resolution screen (full HD), but I want to make sure it will work. I see the part listed as for this model, but want to make sure that the u330 touch will be able to handle the screen if I upgrade with the replacement. Thanks for the help.  

Read other answers
RELEVANCY SCORE 64

I have purchased Gateway ZX 4800-2 from the Best Buy.
The display item at the store was working perfectly and I was be able to use with my fingers. However, the one I have purchased has problem. On the computer properties, it says "No Pen or Touch Input is available for this Display" I do not think the problem is about hardware. But windows 7 might not accept something. Can anyone help me about this problem. System has wireless mouse and keyboard and only one small received came with system where you plug to the usb slot. System has Windows 7 OS on it.
Also, at the device manager, there is something with yellow mark named TACTION. I could not find driver for this name.
When I try to update and locate Gateway Driver DVD, it says already using updated driver.
But still yellow mark is there. I dont know what kind of driver it is and I even do not know what is TACTION is.
Also, when I go to touch portal, it says "Multitouch hardware is not available on your computer"

Read other answers
RELEVANCY SCORE 63.6

Everything was working great for almost 6 months but 3 weeks before while my pc was idle suddenly some graphic display glitches came up and my keyboard and mouse froze up, so I had to do a hard reset by pressing the power button. There used to be GSOD when windows login screen comes up.
 
If I boot in safe mode I can use the device manager to uninstall the AMD 7800 driver which replaces it with the stock "Standard VGA Graphics Adapter" drivers, then reboot in normal mode and everything works.
 
After 2 to 3 days, everythings went back to normal and I was able to install the display drivers. So after 1 week passes, suddenly the GSOD came back randomly. It randomly appears on screen sometimes after 7 hours or somestimes 4h etc. Everytime the keyboard and mouse didn't responded and i had to do hard reset.
 
http://imageshack.us/a/img833/1897/8mac.jpg
 
Now from the last 3 to 4 days, I can't even get into windows normal mode. After the windows logo loading screen, nothing appears, the screen just goto black as normal (As if it trying to load the windows) and again I have to do a hard reset.
 
I only get the crashes if I Install Display Driver and let the system reboot.
 
I tried the different card (Nvidia 7300GT) but same problem. Only happens when I install display driver and let the system restart.
 
Temperatures are normal as well. So far I've disabled the display driver from device manager and using the standard one without any issues.
Thing... Read more

A:Display Driver Crashes in Normal Windows Mode

 Download BlueScreenView: http://www.nirsoft.net/utils/blue_screen_view.html
Double-click BlueScreenView.exe file.
When autoscan is done (screen comes up), click Edit/Select All...then File/Save Selected Items.
Save the report as BSOD.txt.
Open BSOD.txt in Notepad, copy all content and paste it into your next reply
 Publish a snapshot with Speccy:
 
      http://www.bleepingcomputer.com/forums/t/323892/publish-a-snapshot-using-speccy/#entry1797792
 
  Please download MiniToolBox , save it to your desktop and run it.
 
Checkmark the following checkboxes:
List last 10 Event Viewer log
List Installed Programs
List Users, Partitions and Memory size.
Click Go and paste the content into your next post.
 

Read other 23 answers
RELEVANCY SCORE 63.6

Everything was working great for almost 6 months but 3 weeks before while my pc was idle suddenly some graphic display glitches came up and my keyboard and mouse froze up, so I had to do a hard reset by pressing the power button.
There used to be GSOD when windows login screen comes up.

If I boot in safe mode I can use the device manager to uninstall the AMD 7800 driver which replaces it with the stock "Standard VGA Graphics Adapter" drivers, then reboot in normal mode and everything works.

After 2 to 3 days, everythings went back to normal and I was able to install the display drivers. So after 1 week passes, suddenly the GSOD came back randomly. It randomly appears on screen sometimes after 7 hours or somestimes 4h etc. Everytime the keyboard and mouse didn't responded and i had to do hard reset.

http://imageshack.us/a/img833/1897/8mac.jpg

Now from the last 3 to 4 days, I can't even get into windows normal mode. After the windows logo loading screen, nothing appears, the screen just goto black as normal (As if it trying to load the windows) and again I have to do a hard reset.

I only get the crashes if I Install Display Driver and let the system reboot.

I tried the different card (Nvidia 7300GT) but same problem. Only happens when I install display driver and let the system restart.

Temperatures are normal as well. So far I've disabled the display driver from device manager and using the standard one without any issues.
Things I tried:
Fres... Read more

A:Display Driver Crashes in Normal Windows Mode

Welcome to Sevenforums...

Maybe could have a look HERE

Read other 2 answers
RELEVANCY SCORE 63.2

Not sure whats ging on with my Ideapad. I can see that the power is working but the screen remains BLACK. I think it may be the display card, but I'm not sure. Can anyone point me in the right direction to a good Lenovo Repair store close to Philadelphia? Any advise would help! Thank you!

Read other answers
RELEVANCY SCORE 63.2

Not sure whats ging on with my Ideapad. I can see that the power is working but the screen remains BLACK. I think it may be the display card, but I'm not sure. Can anyone point me in the right direction to a good Lenovo Repair store close to Philadelphia? Any advise would help! Thank you!

A:DISPLAY PROBLEM Ideapad U310 Touch

Hi DILEMMA123,
 
Welcome to Lenovo Community!
 
As I understand that you are facing issues with your Ideapad U310 touch display, however when you power on the unit there is power but  no display and the screen remains black.
 
Here are the troubleshooting steps that you may try
Please do try these troubleshooting steps that may help. - Start by doing a hard reboot, remove the battery and unplug the AC adapter then press and hold the power button for 20 seconds then try booting it up again. - If this will not work, do test the AC adapter if it's working properly. Remove the battery and power the laptop with just the AC adapter connected and see if it will boot up or not. do also try a different AC adapter that has the same voltage and see if it will work or not. - Proceed with reseating the RAM's if trying a different AC adapter will not work, remove them all for couple of seconds then put them back in making sure everything is seated properly. - If it will still not work, connect an external monitor and see if you'll get any display from it. If there's a display on the external monitor that could mean that the problem is the built in display.  - But if there's still no display on the external monitor that means the problem lies in the motherboard.
In addition, here are further service centers that you can also check
I hope the above information helps.
 
Please feel free to post in Lenovo Community Forums if you have any further queries!... Read more

Read other 1 answers