Over 1 million tech questions and answers.

ENVY 34c - Partitioning - HP My Display doesn´t work

Q: ENVY 34c - Partitioning - HP My Display doesn´t work

I am using Windows 7 Professional with the HP ENVY 34c Monitor.I am having a problem with my HP My Display Functionality.I installed the drivers and the software and nothing works on the MY DISPLAY Program.Partitioning does not work, App Sync does not work, even the screen rotation feature does not work.HP My Display is updated to latest version. The only thing that does work is the Wizard, which allows me to adjust the Screen Brightness and Contrast. The main reason I purchased this monitor was to use the Partitioning features, so please someone help. Thank you in advance for any suggestions.

RELEVANCY SCORE 200
Preferred Solution: ENVY 34c - Partitioning - HP My Display doesn´t work

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: ENVY 34c - Partitioning - HP My Display doesn´t work

Hello @MiRoCZ73, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your monitor is not able to access the HP My Display software for the purpose of partitioning and App Syncing, and I would be happy to assist you in this matter! To correct this issue, I recommend removing all of the My Display Software from your computer, and re-installing it. If you do not have the software on hand from a CD, I suggest downloading and installing the software by clicking on the link below: sp70687.exe If the issue continues, I suggest following the steps below: Step 1. Unplug the power cord from the back of the monitor and the wallStep 2. Hold the power button down for at least one minuteStep 3. Plug the power cord back into the monitor and then into the wall outletStep 4. Press the Menu button on the monitorStep 5. Navigate to the Factory Reset option and select itStep 6. Try a different cable connecting your monitor to your computerIf the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. If your monitor is still not able to use partitioning, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.www.hp.com/contacthp/I hope this helps!Regards

Read other 2 answers
RELEVANCY SCORE 129.6

Exact same problem on Windows 10.
Tried all of six steps above, including buying three new cables in step 6 one of those was the specific cable recomended by HP support.
Make 9 calls to HP  and 4 calls to Microsoft. HP signed me up for their paid Freinds Support and I called them 5 times.
I tried the monitor on a surface Book, and Asus Desktop and a Dell Destop. Did not work on any of them. I have installed the latest drivers multiple times and update the firmware in my laptops, Surface Dock and Asus Desktop.
HP connected to my Surface Book several times and installed two different - third psrty partitioning programs. One didn't work the other did but it was a trial version and wanted more money than I felt it should cost.
 
I'm using it as a single monitor with no partitioning. It mostly works but has some strange events where the mouse clicks are off by several undred pixles. rebooting fixes that.
 
Now I have atiny little spider runing arround under the front glass. Very distracting. How did it even get in there? I would have thought the area between the glass and the disply would be sealed arround the edges. 

Read other answers
RELEVANCY SCORE 58.4

Hello! I?m going to keep this thread pretty quick, my computer started acting very strangely, turning on/off rapidly, and through a little internet searching, found that the quick fix was to reset the CMOS on my PC. After doing so, my computer finally turned on, but now doesn?t display, or give power to my RGB keyboard and mouse, although the RGB in the system works. I can?t get into the BIOS or anything, as it seems that the keyboard and mouse aren?t getting power, and the obvious display issue. However, the Bluetooth light on mhm Bluetooth adapter (also USB) does have a light on, so power is going to the USB ports. So, I?m thoroughly confused, and I?m wondering if anyone has a fix unknown to me as of yet, before I ship it out to somewhere for the next 3-4 months for repair (a horrible experience). Thanks!

OS:Windows 10
I?ll put out more info from the PC if needed.
 

Read other answers
RELEVANCY SCORE 57.6

Hi all,

The main problem is type in the forum boxes but not send this message or anything happens after click, rest of functions are OK.
It?s win xp, sp3

Thank you!

Read other answers
RELEVANCY SCORE 57.6

hi everbody i have a toshiba satelite a355 sp7927 R and I change the operative system from vista to windows 7 and then my touch pad does?t work. I try install the drivers from the toshiba support web side and the problem still exists. please someone help me ???????

Read other answers
RELEVANCY SCORE 57.2

I have a problem, i have windows vista in my laptop, my wireless use to work perfectly but now it doesnt want to connect to any page (not even google), the messenger and limewire work, but it doesnt show me any page, ill be very glad if you can help me, thank you.
 

Read other answers
RELEVANCY SCORE 57.2

Its been two weeks that I couldn't use F2 to decrease volme, both F1 and F3 are working well so far. Does any one know what's wrong with my laptop? Thanks,

Read other answers
RELEVANCY SCORE 57.2

Hi, I have got a couple of weeks old Notebook whoms TouchPad mouse suddenly stopped to work. According to Device Manager its enabled and working correct, but it doesnt. I have tryed to found guidelines to fix it by means of Google, but nothing has helped me. I have updated and restored and checked everything but nothing has helped me to get it work again correct. I havent had courage enough to do a hard reset yet or to go back to factory settings. What to do ?????

A:TouchPad mouse doesn´t work

Hello @Kotitonttu,  If your PC is under warranty,  please Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer Verify the warranty status here: http://support.hp.com/us-en/checkwarranty .   Hope this helps, for any further queries reply to the post and feel free to join us again !!  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

Read other 1 answers
RELEVANCY SCORE 57.2

Hi. I have four HP Envy notebook computers that I use regularly at work. Suddenly, starting up one day, all four computers stopped connecting to our wireless network. I tried at a different wireless network and neither of the computers still cant connect. I even tried a third and still no result. All of my other computers that runs Windows 10 (2 Acer, 1 Asus, 8 iMac) are still able to connect to all of the wireless networks. I even run Windows 10 on all 8 iMacs and they can still connect to all of the networks. And there hasnt been any chances to the wireless network. Strange thing is when I bring the computers to my home they can find my wireless network at home, all four of them with no problem. Ive tried all Windows repair and HP assistant and none of it works. Ive updated to the latest drivers and all I can think of. What can have happened. Ive noticed it has been a Windows update, but if that update have affected the network drivers,  how can it the work at home. I can also add that all four laptops work if I use Ethernet. Hope someone can help out. //Richard

A:Wireless network doesn´t work

Hello @Richard63, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the WiFi issue, and wanted to assist you!  I understand that the Envy notebooks will no longer connect to the network.  However, they all connect to your home network.   If you believe an update to be the cause, you can try performing a System Restore, to set the notebooks back to their previous working states.  You can also try uninstalling the network drivers, then restarting the notebooks.  This should allow the system to install compatible drivers.  If you continue to have issues with the notebooks only connecting to the home network, then you may consider restarting/resetting the router.  Please post back with the results. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!

Read other 1 answers
RELEVANCY SCORE 57.2

Hi all,
I purchased a used IBM T41 laptop with WinXP and everything was working fine: cable and wireless internet, Dvd reader , wireless signal (like antenna) was flashing at the bottom of the screen, .
I had some problem and reinstalled OS: deleted partition and formatted into NTFS, install fresh WinXP.
I didnt get any error during installation, but some problem came after: internet, wireless connection, USB drivers, DVD reader and many other.
I couldnt find network adapter name in the Device manager.
To fix this problem I download drivers from IBM site and try one by one to install it.
Finally my internet start to work and I do not have any yellow question mark in Device Manger, but wireless internet and dvd writer do not work.
Network Adapter( in the Device Manader) and Network Connection display only cable internet device and do not have Wireless device type. Also, I have Wireless Link and Wireless Network icons on the Control panel.
Why wireless doesnt work? How can I fix it?
Is this possible that my laptop did not have wireless card before?
Is this possible that card stopped to work after reformatting to NTFS?

Thank you
 

A:wireless doesn’t work after reinstall OS

Read other 7 answers
RELEVANCY SCORE 57.2

Yesterday i installed a PCI wifi card in my pc after which my sound completely stopped working, i have tried updating drivers, selecting the right speakers in the windows control panel and pretty much any other suggestion i found on other sites. My concern is that i might have damaged my motherboard while installing the PCI (I hit it with a screw driver when trying to remove my GPU to fit the PCI in), and that this is the cause of the problem. Do you have any other ideas on how i can fix my sound in windows or should i just assume i damaged the motherboard and buy a soundcard/ a new motherboard?
 

A:Solved: PC sound doesn´t work.

The test is to remove the wireless card, as of course beofre you installed this the sound worked
If it then still does not work and there are no warnings shown in device manager for the sound then I think you can presume that you have indeed damaged the motherboard.
That said, is the sound coming from the integrated sound chip or from the GPU
 

Read other 14 answers
RELEVANCY SCORE 57.2

This issue happened 30 minutes ago and I don?t know what to do, I have a Lenovo think pad yoga 260. I was doing some work on it and once I was done I closed it and put it into sleep zone, 5 minutes later I come and it doesn?t turn on the button nothing is helping I tried plugging it in and that didn?t help. Don?t know what to do any help? thank youamir

A:Laptop randomly doesn’t work

Hello and welcome,
 
No idea if this will help, but try the emergency reset hole in the bottom.  Use a paperclip or similar.
 
https://download.lenovo.com/pccbbs/mobiles_pdf/yoga260_ug_en.pdf
 
Z.
 

Read other 1 answers
RELEVANCY SCORE 56.4

I have a lenovo z50-70 laptop with a built in cam. The cam works on skype, whatsapp, websites on firefox, and the built in Lenovo camera app. When I go on websites on google chrome that use the webcam it will not work even though those websites are always allowed to use the cam on chrome and the settings are not blocking camera use. Chrome is up to date along with the laptop cam driver. I even tried with all chrome extensions disabled and it still doesn't work.

Examples of websites are https://www.onlinemictest.com/webcam-test/, https://webcamtests.com/
The Cam will not work on chrome on these or any other websites that I have tried, but it works just fine on those same websites on firefox.

Any ideas on what it could be?
 

Read other answers
RELEVANCY SCORE 56.4

when I plug my PS/2 mouse in, it beeps and doesnt work... please help me, maybe it is something with bios or i dont know, but the mouse is working well. I have tried it on other pc and it worked so...PLEASE
 

A:when I plug my PCI mouse in, it beeps and doesn´t work...

I think you mean you have a PS/2 mouse. Try another mouse, and see if that cures the problem. If not remove the mouse from Device Manager and on re-boot let Windows re-detect it to see if that helps.
 

Read other 3 answers
RELEVANCY SCORE 56.4

I have a lenovo v110 for 2 months and I?m having many problems with it such as usb ports not working or stuck pixel on screen and it turns on randomly what can I do

Read other answers
RELEVANCY SCORE 56.4

Hi, My touchpad it doesnt work I cannot set because id diesnt appear in my device What can i do? Thnaks a lot

Read other answers
RELEVANCY SCORE 55.6

Essentially, everything is wrong with my computer and I have no way to fix it. The first problem arose about a year ago. My laptop battery suddenly wouldn?t register any charge, and could only be used while plugged in. I thought that might be a battery issue, but, a few months later, I replaced the battery and still had the same issue. Next, I started getting the ?blue screen of doom,? the Kernel Data Inpage Error. My laptop began to consistantly stop working after a few hours of use: webpages would stop loading, files wouldn?t open after being clicked, and then the mouse and screen would become unresponsive. Most of the time, I turn the computer off, unplug it, and restart it to resume use. However, if I left the computer on, it would either give a black screen reading ?all boot options are tried,? or the blue Kernel Data Inpage Error screen (the Kernel Data Inpage Error is the rarer of the two). It would last longerer the less I used it and after repeated sessions of rebooting after freezing, it would only last a few minutes. It also took a while after startup before it could open programs or load websites, but besides this, it still functioned as a proper computer, so, while frustrated and constantly attempting to find a solution, I dealt with it. However, recently, it?s begun to have errors opening any program not factory installed with windows or Google Chrome (I have no idea why Chrome, other browsers won?t open). Originally, I received an error box that... Read more

Read other answers
RELEVANCY SCORE 55.6

Hi

I have got outlook 2010 initially my work email was on POP3/IMAP (I was using IMAP) and outlook Suggested Contacts was working fine no problem ,,,,means when I try to type any address in To or CC fields automatically gets completed.

Then my company change email accounts for all personnel to from POP3/IMAP to Exchange, I set up a new profile on my outlook 2010 to receive email from the exchange, and IMAP is not working any more.

How can I make those Suggested Contacts that were working with IMAP before to work with Exchange email ?

Thanks
 

Read other answers
RELEVANCY SCORE 55.2

Hello, I have a Toshiba Laptop U925T ...I upgraded the OS from Wiindows 8 to Windows 10 and my Touch Screen stop working. Now I downgrade to Windows 8 again and the it still not working.
 

A:Toshiba U925T-Touch Screen doesn´t work after upgrade OS

Probably missing a driver. Go to Toshiba's web site and locate the driver for your Windows version
 

Read other 1 answers
RELEVANCY SCORE 55.2

When I turn the screen 360 o the tablet mode doesnt turn on automatically and the keyboard doesnt turn off. How can this be fixed? As it is now, its useless.

Read other answers
RELEVANCY SCORE 54.8

 long story shortfirst i thought its an Operiting_System problem, tryed lot of stuff no solutionthought that my device doesn?t have a Bluetooth , meh i can live with that but then i try a bootable Ubuntu USB  , the OS start and Bluetooth icon on top right bar went on\off... by itself until it disappears went to settings activate it , laptop move , it goes off again -whaaaaat- used Wi-Fi bottom to disable then enable , BT went on -yeeeeh- hit slightly  beside it BT on\off but WI-FI is fine  so i want be 100% sure its a hardware problem and not something else like BIOSand any idea how to fix it by myself or should I go to maintenance thanks in advancesorry about my grammar google only helped with translation 

A:T430_s Bluetooth doesn’t work on windows 10 ,but works -with glitches- on Ubuntu

update your windows bluetooth driver .... i also suffering this problem 





Supratimmajumder

Read other 1 answers
RELEVANCY SCORE 54

Hello.

I recently purchased the new HP Envy 6.

1. I am unable to do a the standard windows 'create a system backup' in the Backup and Restore option. After a while, it gives a 0x80070002 error saying 'The system cannot find the file specified' ; and my External hard drive autoplays. I have found quite a few similar problems online but none of the solutions have worked. I tried doing a factory restore, failed again.

2. While partitioning the hard drive using Disk Management, I was easily able to shrink the C: to 125 GB but faced problems when creating a new volume. It asks to create the Basic ton Dynamic Disk and then fails to do so. Apparently there are 4 primary volumes already - System, c:, Recovery and HP tools. So how do I allocate the remaining?

3. The HP Envy 6 does not have an optical drive, so how do I best create a backup of my OS?

Thank you.

A:New HP Envy 6 - Facing problems with backup and partitioning.

I can't help with question 1. I gave up on Windows Backup and Restore due to peculiarities such as you are experiencing.

Question 2: Whatever you do, do NOT convert or accept dynamic disks.

Question 3: Most would tell you to use an external disc. It's a good idea to have one to back up your personal data, in addition to the OS. Not sure, but you might be able to back up the OS to a USB stick.

The best single thing you can do now is to post a picture of Windows Disk Management so we can see your current partition arrangement. You may have to convert C to a logical drive, but the picture is needed.

Read other 9 answers
RELEVANCY SCORE 49.6

I plan on doing a full reformat soon, but I had some ideas. I wanted to make a few partitions on my drive, maybe store away 5gigs for my mp3 collection (pulled from my absurdly large CD collection), 10gigs for videos and whatnot, 20gigs for games, so on.
Will this 'work'? I was reading somewhere that with Windows xp it is a good idea to save the pagefile to its own partition, to prevent fragmentation. I would like to do that. Also, I wanted to make a partition to install my games to, again, would this 'work'? Or is it a must to install all programs/games to the same partition as windows?

I'd really like to try and isolate the windows install on its own partition basically, if it's possible.

What do you think?
 

A:Partitioning up my HD, will this 'work'

Read other 14 answers
RELEVANCY SCORE 48.8

I recently had some trouble partitioning a new hd I put into my new pc. Its a 200GB drive, but when I was installing XP Pro it only saw 130GB and partitioned and formatted it that way. Under disc manager I can see the other 70GB there as unpartitioned space. I've been told that only Partition Magic will extend this NTFS partition, however I don't want to pay for a program that I'll use once.

Is there a way I could do this: Partition the remaining 70GB, then transfer all of my stuff (including my XP Pro install) from my current partition onto the 70GB partition, then get Windows to boot from the 70GB partition and use the other 130GB as storage?
 

A:Partitioning Question. Will this work?

Read other 9 answers
RELEVANCY SCORE 47.6

Ok, this seems like the most ... suited forum for it.

So every few months I like to back up all my data and do a clean wipe of my system... Just to keep it quick and clean. A nice purge never hurts. Well, unless you don't backup properly...

So, I thought of something recently, and was wondering if it would work:

I have a 300GB hard drive, I only use about 200GB, usually.

Say I only have 50GB of stuff to backup, would I be able to repartition my HDD, adding a new partition of say, 75GB, without deleting my current one? I'd use ****** Partition Manager Server (because I got it for free off of http://www.giveawayoftheday.com/) to do this?

If so, once I have that new partition, could I then install windows on it and have it be TOTALLY separate from my current one? IE: Say I had a bunch of malware and stuff on my current partition, would ANY of it be able to get to the new partition?

Next I'd move my stuff over to the new partition via an external HDD (I'd copy it on, reboot into new partition, copy stuff onto new partition).

Then I'd delete the old partition and resize the new one...

Would this work?

Sorry if it's so fractioned... It's hard for me to make it coherent.. =(

Thanks in advance!
-ThatGuy

A:[SOLVED] Partitioning and Clean Wipes - Will this work?

Why not do this:

Of course backup all of the important data that you have to another media like DVD or other media and then purchase a good image program like Acronis True Image from : http://www.acronis.com

Then do a good purge and format and re-install everything all updates, programs, and data etc so the computer is working perfectly for you. Then make an image with Acronis to a separate hard drive.

Next time just restore the image from Acronis backup and you are backup and running in no time flat. A lot less than partitioning, formatting, installing windows and all of the eupdates and all of your programs, the last one of those I did it was 5 hours before I released the computer back to the customer.

Read other 8 answers
RELEVANCY SCORE 44.8

The computer will turn on, but will not display. I've followed all the steps here several times, http://support.hp.com/us-en/product/HP-Pavilion-23-g200-All-in-One-Desktop-PC-series/7161726/model/7..., but the problem persists. All media have been disconnected/removed from the computer.  Help!

Read other answers
RELEVANCY SCORE 44.8

Hey! I haven't been able to connect to a secondary display since upgrading to windows10. I have updated all drivers yet can't seem to find the problem. Also my brightness control doesn't work anymore(neither the physical button control nor the one on the taskbar). Here are my system's specs:
                             
 HP ENVY 15 Notebook PC
serial number: [personal information removed]
Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz
Intel HD graphics and NVIDIA GeForce840M

Read other answers
RELEVANCY SCORE 44.4

I have a brand new Envy x360 that I've had about a week. The power will turn on but there is no display, no HDD activity and lights on the cap locks and mute will not turn on. I've tried a hard reboot, held the power button down for up to 30 seconds to shut it off. I've connected it to an external monitor via the hdmi port, and i've disconnected the battery for about 30 minutes, connected AC power. Still not display, no bios post and no HDD activity light. At this point I'm guessing the motherboard failed. Are there any other troubleshooting suggestions or should I return it to the store I got it at (Costco) for a replacement?

Read other answers
RELEVANCY SCORE 44.4

i have an envy 4-1115dx running win8. i power the device on and am able to run diags on it. (all passed) when i turn it on i get past the BIOS but once i get past that the screen goes blank. i can move the mouse around a little but never get the login screen. i tried to run a recovery but that never goes anywhere. i dont believe that the display is bad as i can see everything fine in the bios and diag screen. any ideas are welcome

Read other answers
RELEVANCY SCORE 44.4

On bootup after the PC has been off for an extended period of time, the display is distorted. Sort of purplish. I can sort of see what is going on in the back ground, see the HP logo on POST boot, see my background when getting into Windows. After about a minute, the issue will sort of go away, on the right side of the screen the display will be sort of grainy, on the left side it looks great.  Any idea what the issue could be?

Read other answers
RELEVANCY SCORE 44.4

I have an Envy 24 IPS Monitor with display issues.  It looks very "cloudy" and there is a thick vertcal line going down the middle.  I hooked it up to my iPad and had the same display issues.  Already have done factory reset.  Any help appreciated.  I've had the monitor less than a year and it's been great until recently.

Read other answers
RELEVANCY SCORE 44.4

Hi,My little brother dropped his Envy X2 10" convertible and now it has a broken screen. I disassembled it to see the model, and searched the internet for it.The model number for the screen I have is: TV101wxm-np1The only type I can find on Ebay, Aliexpress, repair shops: TV101wxm-np0Are these compatible?  Thank you!Casper

Read other answers
RELEVANCY SCORE 44.4

I recently attempted to install software for a MD passport external hard drive on my hp envy laptop. Initially everything seemed to work fine but when I went to start up the software the screen went blank except for the cursor. I can push control,alt and delete and the task manager displays. If I do the old power off and then push the Windows,B button and power button simultaneously I get the sign-on screen. I can then sign on but the screen goes blank again. Any help would be appreciated

Read other answers
RELEVANCY SCORE 44.4

No display by HDMI or touch screen. Fan is running and lighted keyboard function works properly. Any way to factory reset?

Read other answers
RELEVANCY SCORE 44.4

I have an HP Envy Dv7-7233nr that has a cracked screen.  I bought a new screen and while replacing it the lvds cable was damaged and it was replaced.  After replacing both the screen and the lvds cable i cannot get a display (The backlights are not coming on).  I connected to a external display and was able to see the desktop and update drivers and use the F4 function for the monitor display.  I also went in to display settings and windows does not recognize the built in monitor.  So thinking the new screen was defective i tried the old screen and still did not get a display only on the external monitor.  I then installed the new screen on another laptop and everything worked.  Should I replace the motherboard or can someone help me with some extra troubleshooting ideas?

Read other answers
RELEVANCY SCORE 44.4

The display on my Envy 15, product number: J9H90UA#ABA, flickers when moving the screen back and forth. From what I have read, this is due to a faulty LCD display cable. I can buy a replacement cable but I am not really sure how difficult it would be to replace it. Does anyone know of any how-to videos or anything for this? I am not very experienced with working on computers. Also, does anyone know how long I can expect the display to last in the current state of flickering before the cable just gives out altogether? Thanks.

Read other answers
RELEVANCY SCORE 43.6

I will buy a unit HP Envy  700 - 327c. I have two queries: 1. I would like to ask if this computer is capable to dual monitor display with its on-board display card . At the back it has one VGA and one DVI port. Can I use both of these ports? 2. If I'm going to buy an expansion graphic card, what specs would be compatible with this desktop? I will use this for my everyday computing in the office. Thanks

A:Dual display for Envy 700 - 327c

Hi, Please check the following discussion:    http://h30434.www3.hp.com/t5/Desktop-Audio-Video-Monitors/Dual-monitors-on-HP-envy-700-327c/td-p/473... Regards.

Read other 2 answers
RELEVANCY SCORE 43.6

I have hp envy 2015 and the laptop display is blinking. This blinking is best described as the frequency of the refresh rate of display was not correct. I got envy with winows 8.1 but upgraded it to 10. I have used win 10 for a week but there was fault whit the screen so the laptop was sent to hp repair where they updated bios and replaced the faulty display. 6 months later i face a NEW problem with flickering display. I can best describe it as very slight blinking of the whole screen but it is very anoying when you open aplications or programms that have contrast of dark colors. I made sure all my drivers are updated, i made sure that the refresh rate of the screen is made 60 Hz (max). Backlight is fully bright and there is no interference whit lights in the house cuz the problem is present in darkness. I even tought that there might be the ptoblem with program compatibility but that might not be the case. I am out of ideas what to do please help .

A:Flickering Display on envy 2015

Envy 2015 is not really a model we need to know the HP Model number: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00033108 Sounds like a hardware issue I hate to say. Have you tried an external monitor? If the display is stable on an external then the problem has to be the screen panel itself of a connection to it. 

Read other 1 answers
RELEVANCY SCORE 43.6

Greetings HP Fans. I purchased an HP Envy X360 about 8 months ago.  I've noticed over the past couple of months that the display will blink (flicker) off for a fraction of a second on a regular basis.  On average ever 20 - 30 secords.   I had read that it was a Google Chrome issue, but I've noticed it on everything, programs, apps, etc.  It happens in both regular and tablet mode. I've been searching the blogs, but I've not found anything that addresses this particular issue. Any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 43.6

Hi please help me as well as I am having the exact same problem. I am unable to connect an external laptop to use my screen via the HDMI cable.

A:Re: HP Envy 34c - HP My Display has stopped working

Hi there @boowah, May the Forums be with you!  I understand that you are trying to use your 34c display with your laptop computer.  I am happy to give you a hand with this. What is the model# of the laptop you are trying to use? Are you getting any error messages on the display when you try to output to the 34c? Also please see HP ENVY 34c Media Display - Product Specifications. What is the maximum resolution supported by your notebooks display adapter? Please let me know when you can.

Read other 1 answers
RELEVANCY SCORE 43.6

OK. I just purchased the Envy 34 Curved all in one due to the tremendous real estate on the 34 screen. Here's my question - I am trying to use a portion of that Envy screen to emulate my laptop screen, so I can toggle back and forth between the laptop and the HP Envy.  In my prior desktop arrangement, I used a KMV switch that allowed me to share the keyboard, mouse, and speakers using a single monitor.  But now, since the HP Envy 34 does not have a traditional monitor input port, per se, I'm not sure if any of this can be done. I've tried hooking up the laptop to the HP Envy Curved 34 all-in-one by hdmi. It works but it takes up the entire HP Envy 34 desktop  (can't seem to shrink it as a separate window on the desktop). I've also tried to connect the two computers together wirelessly using the Windows 10 Connect feature, but the laptop does not seem to support the Miracast functionality (even tho the laptop also uses Windows 10). Is there a way to use a USB to USB conenction, or a USB - C port, or even the Thunderbolt port to get the laptop screen onto the HP Curved 34 screen?  Hope this is clear!!

Read other answers
RELEVANCY SCORE 43.6

The display of my notebook is very low like it change into another videocard or what its really different.

Read other answers
RELEVANCY SCORE 43.6

Hello, I have hp envy dv6 7250er and it has 1366x768 display matrix. I know that 7000 seria include notebooks with FullHD matrix. So is it possible to change 1366x768 matrix on FullHD matrix?

Read other answers
RELEVANCY SCORE 43.6

The panel on my laptop is a Brightview with LED backlit, but the vieweing angle is not so good, and the colors tend to get darker or brighter as I move the screen. I would like to change it with an IPS panel but I don't know neither the model to get or how to get it, (or how to do it, but I'll get this done from someone else if I'm not capable enough).So, basically the question is: Is it possible? If it is, how can i know what panel to buy or if it'll be compatible?













Solved!

View Solution.

A:Display panel upgrade on HP ENVY 15

This is your screen: 15.6-in, BrightView, full HD, LED for non-Touchscreen computer models with bezel 763582-001  This is a 30-pin right rear connection LED panel with bottom and top mounts.  Even though this says it is for a Dell it will work in your laptop: http://www.ebay.com/itm/15-6-LED-LCD-Screen-Display-For-DELL-inspiron-15-7566-1745-FHD-IPS-CIE1931-72-/351939188033?hash=item51f135d541:g:ELoAAOSwImRYSObP Your Manual: Manual Not your exact model but the process is the same: https://www.youtube.com/watch?v=FYoXz12gYQc If this is "the Answer" please click "Accept as Solution" to help others find it.   

Read other 2 answers
RELEVANCY SCORE 43.6

Recently my HP MY DISPLAY software has stopped working.  This is the softare that allows me to use the advanced features of 34" curved display.  I have downloaded all of the drivers/software on the support page but it hasn't helped.  I have uninstalled them and reinstalled and it has not helped.  When I try to open HP MY DISPLAY a messge pops up that says "Enumerating Display Devices phase 1" , then a large moving circle displays like it is waiting.  Then I get the error messge "HP My Display has stopped working". Any ideas?

Read other answers
RELEVANCY SCORE 43.6

Display screen on laptop is not working. However, when I hook it up to an external monitor through an HDMI cord the display of the monitor portrays on the external monitor just fine. When issue first started, it was a white blank screen when connected to monitor that displayed functions normally. I allowed laptop to update, and then laptop screen worked properly. A few days later same issue, blank white screen on laptop display. Now it is just a black screen. I am writing this through the malfunctioned laptop, with display on external monitor. Brought it to Geek Squad and they said it was probably a software issue. Please help!

Read other answers