Over 1 million tech questions and answers.

can't get Microsoft Visio Viewer to work?

Q: can't get Microsoft Visio Viewer to work?

I have installed and then reinstalled Microsoft Visio Web Viewer 2003 and still can't open .vsd files. I saved the .vsd file to my desktop. Afterwards, I opened Internet Explorer. Then I clicked Open in Internet Explorer, then pasted the file's address into the Explorer browser.

When I click ok, rather than an image of the file, I get a blank window with a small box with a red x in it. What am I doing wrong?

Please advise, thanks very much.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: can't get Microsoft Visio Viewer to work?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 73.6

Visio files are received as attachments in Outlook 2016. Visio Viewer 2016 and IE11 are also installed on Windows 10 (1607).
Previewing the Visio file (VSD in this case) is successful. However, when you try to open the Visio file, IE11 attempts to open it (as expected) but only displays a blank page.
Does anyone know if there is a fix for this issue?   Other articles suggest that Visio Viewer 2016 does not support IE11.

Read other answers
RELEVANCY SCORE 64

I have Office 2007 and the Office 2010 Visio Viewer installed. Anytime I click on a vsd file, I am redirected to Internet Explorer where the Visio Viewer is launched. This is fine for browsing a Visio file. I can move the diagram around and zoom in for more detail.

However, when I want to print the Visio diagram I'm finding I cannot get it to work properly. First and foremost, Visio diagrams seem to work on a "boundless" paradigm. There is no real "border". If you move a diagram up, the scroll bars re-position to keep the diagram "centered". So, when I go to Print Preview, I find the diagram is too small. I want to zoom in on the diagram and have it print to fill the page, without unnecessary white space around this. But... this does not happen. The Visio Viewer does some kind of reduction, making the fonts look pixelated.

I can't for the life of me find a way to center the diagram to fill the page and then print this. I've tried a couple of separate tools, like visViewer, but they can't achieve this either. My "workaround" is to use visViewer to screen capture portions of a diagram, then bring those separate images into Photoshop and piece them together. This is laborious and tedious.

So am I missing something? Or is there a 3rd party Visio viewing tool that does a sufficient job and being able to print diagrams with a decent scaling function, so that a diagram will "fit to page" with good resolution? Heaven forb... Read more

A:Visio viewer -- terrible at printing

I believe the main issue with printing from microsofts viewer is related to a bitmap representation of a vector image - quality will always suffer in these circumstances

There are other (mostly if not all Free ) viewers for the format, have not used any of these as I have direct access to all versions of the Visio application but may be worth a check to see if anything better meets your needs

there's a list here ... ... Free Visio Viewer Downloads - Visio Viewer Software

Read other 1 answers
RELEVANCY SCORE 63.2

Hiya

The Microsoft Visio® Viewer 2002 allows anyone to view Visio drawings and diagrams (if created with Visio 5, 2000, or 2002) inside their Microsoft Internet Explorer version 5.0 or later Web browser.
Visio users can freely distribute Visio drawings and diagrams to team members, partners, customers, or others, even if the recipients do not have Visio installed on their computers. Internet Explorer also allows for printing, although this is limited to the portions of the drawings that appear in the current view.

The Visio Viewer 2002 enables users to discover the advantages of using Visio drawings, charts, and illustrations in a Web-based environment. It is particularly useful for teams that need to collaborate from different locations.
Required software
Microsoft Internet Explorer 5.0 or later, and any of the following Microsoft operating systems:

Microsoft Windows® 98 Second Edition (SE)
Prerequisite: Install the updated Windows installer for Windows 98
Microsoft Windows® Millennium Edition (ME)
Microsoft Windows NT® 4.0 with Service Pack 6 or later
Prerequisite: Install the updated Windows installer for Windows NT
Microsoft Windows® 2000 (any edition)
Microsoft Windows® XP (any edition)

http://office.microsoft.com/downloa...aseID=41367&area=search&ordinal=1&redirect=no

Regards

eddie
 

Read other answers
RELEVANCY SCORE 57.2

Hopefully someone can advise and help. I purchased ( I'm in the UK), Microsoft Visio Premium 2010 through the employee home-use program. Unfortunately, I had to rebuild my PC from factory settings and lost MS Visio, I have no disk. I have the product code, but the download link I was given 2010 doesn't exist. I cant find anywhere a download link, can anyone please help.

Thanks

Read other answers
RELEVANCY SCORE 56.8

Hello, I need to convert a PDF file and be able to edit it using Microsoft Visio 2003. If anybody could help me or lead me in the right direction that would be great. Thank you!
 

A:Microsoft Visio 2003

Dream on!

You're talking about converting a display format file, probably a raster based graphic, into a vector based file. I don't think that's going to happen.
 

Read other 2 answers
RELEVANCY SCORE 56

please let me know why alwayes appears on the screen that it needs to update the ( microsoft visio for enterprise architects SR-1 ) , it bothers me , please solve this problem to me !

Read other answers
RELEVANCY SCORE 56

Hi I have visio 2007 files but I've installed visio 2013 on my windows 7 enterprise.
When I open 2007 visio file on visio 2013 system auto-start convert and crash. 
I tried repair office, repair visio, uninstall and re-install office 2013 + visio 2013 but same issue.
Could you please help ?
event mgr details:
Faulting application name: VISIO.EXE, version: 15.0.4927.1000, time stamp: 0x58ec8270
Faulting module name: VISLIB.dll, version: 15.0.4927.1000, time stamp: 0x58ec80cf
Exception code: 0xc0000005
Fault offset: 0x0025bc01
Faulting process id: 0x2240
Faulting application start time: 0x01d2f57442bfe02b
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\VISIO.EXE
Faulting module path: C:\Program Files (x86)\Microsoft Office\Office15\VISLIB.dll
Report Id: 819e1cdb-6167-11e7-8623-10604b5de299

Read other answers
RELEVANCY SCORE 55.6

I use Microsoft Visio to design Traffic Control Plans for my business. Monday am I could suddenly not open any file including ones saved on flash drive. I have had 2 services look and we have uninstalled reinstalled did repair etc nothing works. Files say Corrupted how can 100's of files be that way. I noticed something when I was playing with it because it will open new sheets to draw on only to be "corrupted" as soon as saved and closed. I usually name them MHT #etc. If I name them drawing 1etc I can now open my new ones. Anybody out there use this program. I use Windows 7 Home Premium.
 

A:Microsoft Visio 2016 Corrupted Files

How to Repair a Corrupt Visio File

?
 

Read other 1 answers
RELEVANCY SCORE 54.8

Hiya

Tools to support deployment of Microsoft Office Visio 2003
System Requirements
Supported Operating Systems: TabletPC, Windows 2000, Windows 2000 Service Pack 2, Windows 2000 Service Pack 3, Windows XP

Microsoft Office Visio 2003 Professional, Microsoft Office Visio 2003 Standard, Microsoft Windows 2000, Microsoft Windows XP
http://www.microsoft.com/downloads/...f0-13c2-42bc-a561-c7dfd166642d&DisplayLang=en
Regards

eddie
 

Read other answers
RELEVANCY SCORE 54.8

A customer of mine has Visio Professional 2007 and every day or so he gets the pop up wanting him to select either add or remove Features, Repair or Remove.  After doing the repair it works, but he keeps getting this.  I've removed the program
and reinstalled, but the problem came back.  Any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 54.4

I needed to free up space on my C: drive, so I attempted to uninstall Microsoft Vision Standard 2007 -- but the uninstallation would not work using Add/Remove Programs. So, I hastily used the Windows Installer Clean Up Utility to remove it, which is appears to have done to some extent.

Problem: The program is still appearing in the Add/Remove programs pane, and it won't allow me to uninstall from there.

I've tried reinstalling Visio from the disc, but receive this error right before it quits:
"Microsoft Office Visio Standard 2007 encountered a problem during setup."

I don't want the program anymore, I'm just trying to remove all traces of it from my computer without causing further damage.

When I run Microsoft Office Diagnostics, I got this result:Setup Diagnostic ? Missing media

The Setup Diagnostic was not completed because a valid source was not found. Either the local installation source is missing, or the original source that was used to install Microsoft Office is not available to the repair process. You may need to provide the original source to allow this diagnostic to run successfully. Valid sources for the 2007 Office release include the following:

Your 2007 Office release installation CDAn installation disk or repair CD provided by the vendor of your computerA connection to a network installation of the 2007 Office release
After you obtain access to a valid source, run Office Diagnostics again.
Any help would be great,
Thanks!

Read other answers
RELEVANCY SCORE 54.4
A:need a good teach - yourself visio book...mine is visio v 4

Many of them out there. Try Barnes & Noble or Border's Books.

Courtney
 

Read other 2 answers
RELEVANCY SCORE 54.4

I am using Microsoft word 2016 and Visio 2013.
I put the Visio images directly in the word document and a Visio object is created.
However, if the file I have created is opened and saved in lower version than word 2016 (let's say word 2010) the visio object is shown as an unidentified object in my pc. Whereas, in the other pc where it was edited (which was having a lower
version of Microsoft word) it works fine.
Please help me solve this problem.
Thanks in advance.

Read other answers
RELEVANCY SCORE 53.2

Hiya

The Microsoft Visio IFilter is a component used by the Microsoft Windows Indexing service, SharePoint Portal Server and SharePoint Team Server to index text in Microsoft Visio files (.VSD, .VSS, .VST, .VDX, .VSX, .VTX formats).
System Requirements
Supported Operating Systems: Windows 2000, Windows NT, Windows XP

Requires one of the following operating systems:

Microsoft Windows NT 4.0 (with service pack 6 or later)
Pre-requisite: install the updated Windows installer for Windows NT
Windows 2000 Professional (with Service Pack 3 or later)
Windows 2000 Server (with Service Pack 3 or later)
Windows XP Professional

Requires the following minimum hardware:

PC with Intel Pentium or AMD Athlon-class processor running at 200 MHz or higher.
64 MB of RAM for the operating system, plus an additional 16 MB of RAM for the Microsoft Visio IFilter
5 MB of available hard disk space.
http://www.microsoft.com/downloads/...21-dd90-447f-b145-ded2bc21cb5c&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 53.2

Hi,

At work, we recently upgraded from Visio 2000 to Visio 2003.

Mistake. Big mistake. Huge.

Now, when we try to edit the graphics, we get the same types of problems that many other users have reported: lines don't connect; text is improperly kerned (spaced between letters); text appears lighter (medium gray) in print and on screen; some elements don't display.

Has anyone been successful at getting Visio 2000 images into Visio 2003 format without heavy image editing?
 

Read other answers
RELEVANCY SCORE 47.2

I gave up on getting Winfax 10 to work reliably with XP Pro and decided to try the built-in fax software. Installed and runs ok, but when I go to view a fax (received or sent), instead of the Image and Fax viewer, I get Hex Workshop.

Photoshop is the default viewer for TIFs. Hex Workshop is installed and used, but is not the default for any file type!

Any thoughts?
 

A:Microsoft Fax Viewer

bobroosth said:

I gave up on getting Winfax 10 to work reliably with XP Pro and decided to try the built-in fax software. Installed and runs ok, but when I go to view a fax (received or sent), instead of the Image and Fax viewer, I get Hex Workshop.

Photoshop is the default viewer for TIFs. Hex Workshop is installed and used, but is not the default for any file type!

Any thoughts?Click to expand...

Uninstal and
Reinstall

Really, I run winfax pro 10 without any problems. It does a great job. the one thing you need to watch out for is that when you install winfax 10, it corrupts a word file if you use Win2k Pro. This affects word 2000. You should be OK if you don't use word 2000. The symantec site has an excellent FAQ for troubleshooting probs too...doc

 

Read other 1 answers
RELEVANCY SCORE 47.2

I would be interested in how many people have successfully installed and used, Microsoft's RAW Image Thumbnailer and Viewer for Windows XP ?
 

A:Microsoft's Raw Viewer

Read other 6 answers
RELEVANCY SCORE 46.8

Hi.

I have just received an MS Publisher file from a colleague. But I don't have Publisher and don't wish to purchase it. Does anyone know of a viewer for MS Publisher?
 

A:Microsoft Publisher Viewer

nope, doesn't exist
best you can do is order the 30 day trial, then continue using it as a viewer after the functions stop
http://www.microsoft.com/Office/publisher/prodinfo/trial.mspx

or have them pdf it and resend it to you
 

Read other 2 answers
RELEVANCY SCORE 46.8

I was asked to come here to check if I had any infections or not. From: http://www.bleepingcomputer.com/forums/t/178933/microsoft-event-viewer/I posted: In EventViewer, sometimes I get a yellow triangle with ! with Event ID of 4226 with this message:TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.What exactly is happening here and is this a bad thing? Any help would be good, thank you!

A:Microsoft Event Viewer

I'll help you get started.Please refer to the instructions of quietman7 as shown in the link below for Malwarebytes..http://www.bleepingcomputer.com/forums/ind...t&p=1001350Then post the results of your MBAM log here.

Read other 1 answers
RELEVANCY SCORE 46.8

When I attempt to open raw images i get the message "failed to load the image" but it is okay to open jpegs. I can open RAW in CS3.

Help

Pete
 

A:Microsoft RAW image viewer

If you just want to quickly review raw images before processing them, try IrfanView. You can view them as thumnails and quickly open individual images for a closer look.
 

Read other 3 answers
RELEVANCY SCORE 46.8

Hi,

the microsoft photo viewer on my w81 desktop opens some fotos & others says not known format.

Where can I download & install again in case it is corrupted?
 

A:microsoft photo viewer

Read other 10 answers
RELEVANCY SCORE 46.8

I'd like to install the Microsoft Image Viewer. The program that allows you to "print" something to a file instead of a printer. I must've uninstalled it or something, because I can't find it anywhere on my computer.

If anyone knows what I'm talking about and can help me find it, or install it, that'd be greatly appreciated.
 

A:Microsoft Image Viewer (Need Help)

I think you might actually mean "Microsoft Document Image Writer", which is very different to Microsoft Image Viewer.

Perhaps the link below will help?

http://www.mydigitallife.info/2007/...oft-document-imaging-format-with-office-2007/
 

Read other 2 answers
RELEVANCY SCORE 46.8

I just got a .mpp extension file.

Does someone know from where I can download a Microsoft Project file Viewer?

This is urgent.
 

A:Microsoft Project Viewer

to my knowledge a viewer for mpp files doesnt exist, however this link may be of use to you.
http://www.kidasasoftware.com/support/qa/Viewer_and_Project_files.htm
 

Read other 1 answers
RELEVANCY SCORE 46.8

Hi,

could anyone please provide me the .mpp(microsoft project viewer) software to me. It's needed to me as there is an important document to view in .mpp format.

Thank you for your valuable time.
 

A:I need .mpp(microsoft project viewer)

http://office.microsoft.com/en-us/assistance/HA010449811033.aspx

www.microsoftprojectviewer.com

http://www.projectreader.com/

HTH
 

Read other 3 answers
RELEVANCY SCORE 46.8

In EventViewer, sometimes I get a yellow triangle with ! with Event ID of 4226 with this message:

TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts.

What exactly is happening here and is this a bad thing?

A:Microsoft Event Viewer

Hi .FWIW: This is NOT the same as the limitation on simultaneous downloads possible, do not treat it as such.http://64.233.169.104/search?q=cache:S_r82...;cd=7&gl=usLouis

Read other 4 answers
RELEVANCY SCORE 46.8

my xps viewer is not working. xps viewer has stoped working. I went to look to uninstall net framework 3.0 but I cannot find it. 3.5 but no 3.0 on my list. when I try to turn off windows features for net framework, it says please wait for ever not moving at all on the bar. when I downloaded the uninstall tool for net framework 3.0 from microsoft it cannot find the requred programs or uninstall anything, if I look for the xps viewer file I can find it, I do not know or think its a good idea to go into windows and delete net framework 3.0 from my computer? but I do not know how to fix this issue? any help appreciated, no there is not a restore point.

A:microsoft xps viewer error

I'm not sure why you want to uninstall .NET Framework 3.0 - we instead need to make certain it IS installed and enabled and that .xps is also enabled.

Here's how to make sure you have .NET Framework 3.0 installed and XPS Viewer enabled: What is the XPS Viewer?. The article suggests if .NET Framework 3.0 isn't installed (and I get the impression that might be the case from your post though I'm not sure how or why that happened), to install it using the download from the link in the article but the download says it isn't for Vista and I cannot understand how the two articles both from Microsoft can present such diametrically opposite guidelines - so to be on the safe side I wouldn't do it yet (but we may come back to this later if all else fails).

In the meantime, let's try some general troubleshooting, starting with a check of your system files and hard drive for corruption or problems.

Go to Start / All Programs / Accessories / Command prompt and right click on command prompt and click run as Administrator.

Type sfc /scannow and enter and let it run. It will scan and try to fix some of your system files. Hopefully it will complete with no corruption it could not repair (if there is such corruption post back here or try to analyze it to find the problem file(s) using http://support.microsoft.com/kb/928228. Try to attach the report (you may need to copy it to your desktop before it will permit you to attach it) here so we can see if they can be repaired with good copies... Read more

Read other 11 answers
RELEVANCY SCORE 46.4

On my new Dell Laptop running Windows 7, when I attempt to open a PPS file, I receive the following message:

"This program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem."

I have uninstalled and reinstalled this program 3 times. And after every reinstall it works for a short time and then quits.

Anyone have any explanations/cure?

Thanks, as always
... Red Boy
 

Read other answers
RELEVANCY SCORE 46.4

Does anyone know the name/location of the Microsoft Picture and Fax Viewer? I want to associate my scanner with it, and it asks for the .exe location. Any ideas?
 

A:Location of Microsoft Picture Viewer

Read other 10 answers
RELEVANCY SCORE 46.4

could someone please tell me where to find this file, so i can associate with my files, went to registry told me to look in c:/windows/System32
found fontview.exe but not a good file

thank you for you help
Marie

A:microsoft windows font viewer

Hi and welcome to TSF see if the info here can help with your issue How to restore Windows 7 default fonts. - Microsoft Answers

Read other 6 answers
RELEVANCY SCORE 46.4

online course I want to take. Problem is I can't get the downloaded file to run. I downloaded it from 2 different places with the same results. I click on the agreement, and as soon as I click on 'continue', I get the message "The installation of this package failed." It is instantaneous. No time to even start working.

I am running XP Home with SP2. Operating system was recently reinstalled by a professional after running Panda, and removing a couple Trojans.

I tried a download form Microsoft and from CNET. Went to a third one, softpedia, but didn't download from this site. Didn't know what External Mirror 1-SP1 or External Mirror 2-10 meant.

Thanks.

A:[SOLVED] Need Microsoft PowerPoint Viewer for an

So you tried this one right? because that one installed for me no problems. If you can't install that one then we know it's a problem with your PC and not the download itself.

Read other 6 answers
RELEVANCY SCORE 45.6

I downloaded the newest version and can't get it working......
http://www.microsoft.com/windowsxp/using/digitalphotography/prophoto/raw.mspx

Has anyone actually tried this on Canon's *.cr2 files and been able to view the thumbnail? I had the previous version and it worked for the Rebel RAW files but this version will not work on my 30D RAW ( .cr2 ) files.

This is what I ran into.....
Upon the first attempt to install the app I was given two choices.. 1) Repair ( as I had the previous ver installed ) 2) Remove. I selected Repair because in most cases it will write over what's already there and add the new files. That didn't work so I went at it again and selected Remove. That wiped all versions off. I reinstalled the app and during the process I was given the choice of which file formats to include. I selected among others the .cr2 format because that's what I need. It completed the install process, I rebooted, opened up a folder that contained some .cr2 files and I do not get a thumbnail. I have tried to look at it with a right click and " preview ", no go. I tried " open with " , selected Microsoft RAW Image Viewer and all I get is " Failed to load the Image ". Anyone have any ideas as their " white paper " doesn't give any clues as to what is going on?

buck52 if you happen to read this it is supposed to handle Nikon's NEF files.
 

A:Solved: New Microsoft RAW Image Viewer Problem

Read other 8 answers
RELEVANCY SCORE 45.6

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Pentium(R) CPU 2020M @ 2.40GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 2
RAM: 6026 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 476587 MB, Free - 304323 MB;
Motherboard: TOSHIBA, Portable PC
Antivirus: Bitdefender Antivirus Free Edition, Updated: Yes, On-Demand Scanner: Enabled


I get below message whenever I try to play a power point show. I have installed and uninstalled the viewer numerous times but still get the message.
Microsoft powerpoint Viewer 2007
usage
/extract path, extracts the package to the path folder
/runs the package in silent mode
/?shows this help message

 
When I go to default programs,
.pps is set to power point viewer.exe
 

A:Solved: Microsoft powerpoint Viewer 2007

Read other 14 answers
RELEVANCY SCORE 45.6

Hi... Just out of curiosity was wondering how to fix these errors I have received regarding Microsoft Antimalware and Service Control Manager.. Below are the error messages shown in Event Viewer. Also would these in anyway affect the performance of my computer?

1. Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
Feature: Network Inspection System
Error Code: 0x80070005
Error description: Access is denied.
Reason: The system is missing updates that are required for running Network Inspection System. Install the required updates and restart the computer.

2. The ScRegSetValueExW call failed for Start with the following error:
Access is denied.

3. The ScRegSetValueExW call failed for FailureCommand with the following error:
Access is denied.

Any help appreciated thanks !

A:Errors in Event Viewer - Microsoft Antimalware and SCM

ScRegSetValueExW is due to AVG, you can stop it by opening AVG - Options/Advanced Settings and turned off " AVG Self Protection". Not sure if it is a good idea though, proceed with caution.

Microsoft Antimalware Real-Time Protection is due to having both MSE and AVG installed same time. Uninstall one.

Is your computer up-to-date with Windows Updates?

Read other 9 answers
RELEVANCY SCORE 45.6

Hi, All of a sudden I am having a problem with my Quick Time Picture Viewer, it is v 5.0.1. I am using Win XP home with SP 2.

It will not open any of my pictures anymore. Every time that I try to view a picture it pops out an error message that says>>

Couldn't display "cute cat-3.jpg" because a suitable graphics importer could not be found

Shoot it was working just fine, then "BAM!" It started giving me that message.

Anyone know what to do to make it work again?

Wendy

A:PICTURE VIEWER WON'T WORK!

Here's a good freeware pic viewer program from Adobe:http://www.adobe.com/products/photoshopalbum/starter.htmlorgo to start/Quicktime/and click on Quicktime updater.

Read other 8 answers
RELEVANCY SCORE 45.6

no matter how many times i click the thumbnail it wont open...i dont know how to get it workin....can someone please help me out?

A:cant get my picture and fax viewer to work

G'Day sully1717,

Try this workaround......

Click Start > Run: type regsvr32 %systemroot%\system32\shimgvw.dll then click OK.

When you receive a message similar to this: DllRegisterServer in C:\Windows\System32\shimgvw.dll succeeded. Click OK.

Close out of Windows Explorer where you have been trying to view your pictures, and reopen it; all should be fine.

Please Note: You will need to be logged on with an Administrator Account to be able to do these changes in the Registry.
Please be very careful when typing the commands, taking note of any spaces etc.

Try it and post back with the outcome.

Read other 3 answers
RELEVANCY SCORE 45.2

hi all,

i always check my boot time from event manager following this pattern:

Event viewer -> Applications and Services log -> Microsoft -> Windows -> Diagnostic Performance -> Operational

off late, i have noticed under Microsoft i get another entry along with Windows. it is IEResp. this was not present earlier.

further under Diagnostic Performance, there was only operational but now there are two more entries i.e Diagnostic and Diagnostic -loopback.

i have observed that my booting time has also gone up.

are these entries valid? why have they turned up? is it ok to keep them or is there any thing i need to do since these entries have turned up.

kindly drop ur views.
thanks,

A:Event Viewer: New Entries Under App. & Service Logs -> Microsoft

pls drop in your views

Read other 6 answers
RELEVANCY SCORE 45.2

Hi,
I am using a microsoft mouse on Win 7-64. In Windows Picture Viewer the mouse wheel won't zoom the image in and out. (yes I make sure I left clicked it, and yes it scrolls fine everywhere else (internet, word, etc))
What could cause this? Something I can check in the registry?
The mouse drivers are the vanilla drivers you get when installing Windows 7-64.

Read other answers
RELEVANCY SCORE 45.2

Hello all,

I have absolutely no idea what has happened to my computer. It was working fine when I left, when I cam home I have lost all my icons(shortcuts). My wife said that she tried to copy some pictures from her SD card to the hard drive. I have no idea if this caused the problem, but all of my icons are leading to the microsoft photo viewer. Does anyone have any idea how to fix this?

Thanks in advance.

A:All Icons have Changed and lead to Microsoft Picture viewer

Hello Darrin,

Downloading and merging the lnk (LNK) option in the tutorial below should be able to fix this for you. It will restore the default associations of lnk (shortcut) files.

Default File Type Associations - Restore

Hope this helps,
Shawn

Read other 8 answers
RELEVANCY SCORE 45.2

Hi,

I am using a microsoft mouse on Win 7-64. In Windows Picture Viewer the mouse wheel won't zoom the image in and out. (yes I make sure I left clicked it.) The wheel scrolls fine in ie9beta.

What could cause this? Something I can check in the registry?

The mouse drivers are the vanilla drivers you get when installing Windows 7-64.

A:Cannot zoom in Windows Picture Viewer (Win 7-64) using Microsoft mouse

Though this doesn't directly answer your question, I use xnview and set it as default for viewing images. I do so because it's free, you can improve the photos, resize, whatever you need to do.

Read other 1 answers
RELEVANCY SCORE 45.2

Hi,

I've got a new Windows Vista that I bought, and it seems I have both Microsoft Office Powerpoint Viewer 2003 and 2007. I don't know where they came from, but one was probably installed via "Microsoft Works" by my family, and the other one (this is just a guess) from microsoft update maybe? The thing is, in Start - Programs I have both. Is there any way to get rid of 2003? Add/Remove programs shows just 2007, and one seems to be in C:/ProgramData and the other in C:/Program Files. Any help?

Thanks in advance =P

A:Microsoft Office Powerpoint Viewer 2003 And 2007

Hi again, PP viewer allows you to read Power point files if you dont want it just delete 2007 through add and remove programs if 2003 remains I would reinstall it then remove it. http://www.microsoft.com/downloads/details...;displaylang=enhttp://www.microsoft.com/downloads/details...;displaylang=en

Read other 2 answers
RELEVANCY SCORE 45.2

Re: Microsoft Power Point Viewer (MSPPV) 2007 version



Downloaded and installed from the recommended site.

Download details: PowerPoint Viewer 2007

Am getting a message that the file: MSVCR80.dll is missing and after reinstalling the MSPPV the viewer still does not work. I simply wish to VIEW a ppt presentation (file extension *.ppt) sent to me for review.



Please advise with specific instructions, am using Windows 7.


Cordially, RJL

A:Microsoft Power Point Viewer 2007 (MSPPV)

this problem comes with one of the power point viewer 2007 update.
solution will be
to manually select not to install that update.
or to get power point viewer 2010
Download details: PowerPoint Viewer
that has no such problems as far as i know.

Read other 5 answers
RELEVANCY SCORE 45.2

Hiya

With Microsoft Access Snapshot Viewer, you can distribute a snapshot
of a Microsoft Access database that allows the snapshot to be viewed
without having Access installed. For example, a customer may want to
send a supplier an invoice that is generated by using an Access
database. With Microsoft Access Snapshot Viewer, the customer can
package the database so that the supplier can view it and print it
without having Access installed.

The Microsoft Access Snapshot Viewer is available with all versions
of Access - though it is not installed by default - and is also
available as a separate stand-alone. The Snapshot Viewer is
implemented by using an ActiveX control.

A vulnerability exists because of a flaw in the way that Snapshot
Viewer validates parameters. Because the parameters are not correctly
checked, a buffer overrun can occur, which could allow an attacker to
execute the code of their choice in the security context of the
logged-on user.

For an attack to be successful, an attacker would have to persuade a
user to visit a malicious Web site that is under the attacker's
control.
Maximum Severity Rating: Moderate

Affected Software:

Microsoft Access 97
Microsoft Access 2000
Microsoft Access 2002
Download locations for this patch

Access 2002:

http://microsoft.com/downloads/deta...63-1BBE-4009-9DF8-52D3A916D54F&displaylang=en

(administrative update only)

http://microsoft.com/office/ork/xp/journ/snpv1001a.htm

Access 2000:

http:... Read more

Read other answers
RELEVANCY SCORE 45.2

Within the past couple of days, a problem has occured on my computer with Microsoft PDF Reader from the App Store. I have searched this forum and found a couple of others experiencing the same problem, but no mention as to how to fix it.

When I open some PDF files using the PDF Reader, they appear with black backgrounds behind/over the text and-or over images. Note that this problem only occurs with SOME PDF files - not all. I am able to open and view the affected PDF files just fine in Foxit
PhantomPDF 6.0. The files affected were created using various versions (PDF-1.5, PDF-1.4, etc).

Only a couple of days ago, I was able to view these affected PDF files without any problem in the Microsoft PDF Viewer. I re-downloaded a couple of the files and tried to view them, but got the same black background.

The fact that I am still able to view the files in Foxit tells me that there must be something wrong with the Viewer software and not with the PDF files. I did an uninstall of the PDF Viewer then reinstalled it from the App Store, but this did not fix the problem.

I noticed one person responded to a similar problem in these forums by asking if the problem persisted in Safe Mode. I tried to see if it persisted for me in Safe Mode, and quickly discovered that the Microsoft PDF Reader cannot be run in Safe Mode on my computer.

Any suggestions on how to fix this problem?

Read other answers
RELEVANCY SCORE 45.2

This error is occurring at start up and on a reboot Microsoft Security Essentials seems to be working and updating ok.
Only thing changed recently was a reinstalled 64 bit driver for Epson DX750 printer.

Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 27/11/2014 19:47:03
Event ID: 3
Task Category: Session
Level: Error
Keywords: Session
User: SYSTEM
Computer: Barrym-PC
Description:
Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>3</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>14</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2014-11-27T19:47:03.531250000Z" />
<EventRecordID>84</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="152" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>Barrym-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
... Read more

A:Microsoft Security Client error in event viewer.

Don't know if this is recommended or not but it seems to be a solution:
(Solved) - Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D ? How-To Geek Forums

Similar things mentioned in this MS thread:
https://social.technet.microsoft.com...7itprosecurity

Read other 3 answers
RELEVANCY SCORE 45.2

After much searching I'm back to this forum for some help!   All of a sudden I'm not able to open pictures in Microsoft Office Picture Manager as they only open in Microsoft Photo Viewer.  Right clicking on the photo 'Open With' will not open in Office Manager but in Photo Viewer.  I have checked the defaults and they are correct.   I have uninstalled Malwearbytes as one post indicated file extension exes. can be missing or changed to nothing at some point because of that software.  Also have went to the registry but FileExtensions file is not there but a FindExtension is and could not continue with suggestions for correction.  Look forward to some help!  Thanks a lot!...........Candy  (I do run RegServe)

A:Microsoft Office Picture Manager isn't the default viewer

Part of your problem could be using registry cleaners as they are not recommended here at Bleeping Computer forums. When you change default - browse program, is the Microsoft Office Program Viewer listed?

Read other 9 answers