Over 1 million tech questions and answers.

T440S won't hibernate with USB 3.0

Q: T440S won't hibernate with USB 3.0

Hello,On my T440S, since BIOS v2.37.1.13 (with little hope that v2.39 would fix it, I installed it to no avail), I can no longer enter hibernation.When I try to do so, the red LED blinks multiple times and then the computer immediately wakes up. The event viewer only shows:The system has returned from a low power state.Wake Source: UnknownThe workaround is to either unplug all usb devices, or disable USB 3.0 support in the BIOS, which sucks for a 1000e + laptop.Otherwise, the computer enters a sleep-hibernate-wake up loop which is draining the battery.When do you plan on releasing an update (BIOS or USB 3.0 driver) to fix this hibernation issue?Thank you.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: T440S won't hibernate with USB 3.0

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 39.6

Hi

My computer can only hibernate once, after that, if it has already hibernated once before during the session, it goes into a strange state where the power is never turned off, but I can't return to windows.

I have this issue. I have the hibernate button and the computer does never go automaticaly to hibernate state.
Powersettings network card are off:
My first hibernate shuts down fast, starts up after first hibernate is fast en everything works ok. Then I do a next hibernate and the computer does not shut down any more. I have to reset the computer and windows comes with the Safe Mode startup screen, where I select "Startup windows normaly", after that everything is working ok again.

What can I do, so I can do multiple hibernate's after each other, without a reboot?
Does anybody has a sollution for this? Thanks in advance.

Chillie

A:Hibernate startup fails after second hibernate

Update your specs so we know what hardware you are using.

http://www.sevenforums.com/general-d...tem-specs.html

Read other 4 answers
RELEVANCY SCORE 36.4

After checking how slow my computer was running, shutting down and taking a nap I decided to shutdown Hibernate and save the time and HD space for other things.

Hibernate file is a large file that is build on startup in your root directory of C:
It seems to store information so if your computer goes to sleep automatically stores the information and suppose to help on startup coming out of sleep mode.
I think it is default on for all installs.


Do you have it ON or OFF?

A:Hibernate or NOT TO Hibernate that is the question

on. hard drives are big enough now that i don't need to worry about massive files taking up precious space anymore. Mainly use sleep though, its alot better in 7 than in previous versions.

Read other 9 answers
RELEVANCY SCORE 36.4

Hi all, My enter key fell of today while writing an essay. It turns out the keycap is broken, but I can't find a replacement anywhere as it is different to all the sites I have seen (See Photo)I only need the actual cap, not the hinge or anything.Can anyone point me in the right direction? The model number of the laptop is 20AQ0069UK, a T440s  Thanks All


























IMG_E6190[1].JPG ?706 KB

Read other answers
RELEVANCY SCORE 36

I recently updated my BIOS on my T440s to 21.20.When I try to change the boot order priority, the screen becomes filled with random characters thus rendering my unable to change some settings in the BIOS. Any thoughts? Thanks.?

Read other answers
RELEVANCY SCORE 36

I just installed a MYDIGITALSSD Super Boot 2 42mm SATA III 2242 M.2 SSD 256-GB in my T440S. The laptop does not recognize a second drive. I can't find the drive to format and use. Does anyone have an idea why that would be? Did I miss something? Thanks!

A:T440S will not recognize M.2 256-GB SSD

For some reason the title changed, I did not type that in. I updated the title. Also, I removed the SSD from the M.2 slot because all of a sudden I lost my track pad. It would not work at all. I could not even access the BIOS. I removed it and everything went back to normal. No idea what could be going on. Any help would be greatly appreciated.

Read other 1 answers
RELEVANCY SCORE 36

Hello! I tried to calibrate display with Calibrize software and ended up changing system's Pnp Generic Monitor icm file. Is there a way to get it back or download somewhere without installing Windows 10 again? Thanks.

Read other answers
RELEVANCY SCORE 36

Dear Users, Since a few moments I am a (happy) owner of Lenovo?s new and business class model T440s. As I could find out, Lenovo is building in two different displays. On the one hand there are several model with aLG-DisplayModel: LP140WF1 (sp)(k1)P/N: 0C00349FRU: 04X0626 And the other from AUOModel: AUO B140HAN01.2FRU: 04X0436 (You can look up your displaymodel via BIOS, Everest or any related program) As far as I could find out in the world wide web there are several users reporting with a LG Display in their T440s that it is in quality inferior to the AUO Display. It seems that Lenovo is ready to replace the LG with an AUO display, sending out a tech. My question is what your experiences are and what can we, the owner of a  LG-Display, do?Is there a real quality gap between these two types of Display? My T440s, as i mentioned, has a LG Display. I can live with this one, if there are no great difference in the quality to the AUO Display. I am excited about your opinions.Thanks Fire

A:T440s - LG or AUO Display

Don't sweat it. Both are absolutey huge upgrades over the TN panel. While the AUO is a bit better, its not worth the trouble. I have both and I like both. I did a compare on the same thread u heard about the issue.

Read other 9 answers
RELEVANCY SCORE 36

Question for T440s owners with AUO panel (B140HTN01.2, non-touch). Is it PWM flicker free across all brightness level?

Read other answers
RELEVANCY SCORE 36

So I'm having trouble with my wifi card on my t440s.I began by putting the windows 7 x86 hard drive in the laptop from my x220, the wifi didn't work so I uninstalled the old drivers and replaced the drivers with the recommended t440s drivers on this site. The wireless worked, I then installed all the stuff lenovo bridge suggested, the start bar stuff annoyed me so I took it out. From then on no operating system, or drivers I have installed, have been able to find the hardware for the Wifi drivers.The bluetooth is working and I have tried using the bios to make sure the wifi function key isn't broken.I have also tried installing windows 7 x64, which is what im working with now, to try and find the hardware.When I go into network adapters, its literally just not there.

Read other answers
RELEVANCY SCORE 36

I just installed one ssd m.2 to my T440p, and use tool to move system startup to this ssd, but when i move this ssd to boot first, but pc could not work normally. Who do this same as me? Please help me, thanks

Read other answers
RELEVANCY SCORE 36

Hi!I started getting low memory messages (*) every 4-5 days. I have a T440s with the following specs (W7 Professional). What you recommend I do beside hardare upgrading the RAM? And can I safely upgrade the RAM? Thank you!(*) Your computer is low on memory To restore enough memory for programs to work correctly, save your files and then close or restart all open programs.

Read other answers
RELEVANCY SCORE 36

Hello.I have T440s with discrete graphic Nvidia Gt730M (optimus model).Is it possible connect external monitor 4k 60Hz over display port? or only 30 Hz?Same question for display port in Dock? Whick model of docks support 4k 60 Hz?

Read other answers
RELEVANCY SCORE 36

i have a t440s and my screen is very dim i need to use a flashlight to see it, i checked the cables and all are connected there is a blue or orange one that isnt i thought that it was weird but i saw on a picture that its like that when i turn it on the lenovo logo comes on but very dim and windows is also very dim i hooked it up to the dock and ran a hdmi cable to it but that didnt work eighter i tested it with my other t440s and it did work when i connect the d-sub cable directly to my laptop it does work and the screen is just black with nothing on it. what can i do?

Read other answers
RELEVANCY SCORE 36

Hello,I recently got a ThinkPad T440s and I noticed that if it gets into the hibernation mode, I cant get out of it. The fans make every 5 seconds or so bursts of air, but I can not get it to start neither to power off by pressing the power button for some time. I have to let the battery run out of juice before using the laptop again.Please help!

Read other answers
RELEVANCY SCORE 36

Can someone please look in the BIOS under startup and see if something appears under HDD2 even though there is nothing there.
 
Thanks

Read other answers
RELEVANCY SCORE 36

I T440s which I updated to Windows 10.  I updated the Lenovo drivers after updating and I have the latest Trackpaad/trackpoint drivers.  I want to use the track point but not the touchpad.  When I go into settings and choose either "Classic Trackpoint" or "Trackpoint Only", the buttons on the trackpad do not work.  Help, Please.
 
Jim
 
 
Moderator comment: Model added to subject for clarity.

Read other answers
RELEVANCY SCORE 36

Apologies if this question has been previously answered.  I searched and couldn't find a response.   I'm still using the original HDD that came with the laptop.  I'm thinking of upgrading to an SSD and cloning the HDD to the SSD.  My question is what to do, if anything, with the, M.2 16gb cache that came with the laptop.  Should this drive be left alone as is in the laptop after the HDD to SSD upgrade?  Should it be removed?  Should anything be done to the M.2 drive if I upgrade the HDD?  My understanding is it currently speeds up the computer at start-up and with an SSD, this wouldn't be all that necessary.   I appreciate everyone's time.  Thank you.   -Rich

Read other answers
RELEVANCY SCORE 36

i have a t440s and my screen is very dim i need to use a flashlight to see it, i checked the cables and all are connected there is a blue or orange one that isnt i thought that it was weird but i saw on a picture that its like that when i turn it on the lenovo logo comes on but very dim and windows is also very dim i hooked it up to the dock and ran a hdmi cable to it but that didnt work eighter i tested it with my other t440s and it did work when i connect the d-sub cable directly to my laptop it does work and the screen is just black with nothing on it. what can i do?

A:VERY DIM SCREEN ON T440S

Make sure drivers are updated and not using a generic VGA driver. This would make the dock not work and not be able to adjust screen brightness. If it is to the point where you can hardly see it at all then it most likely is a bad screen.

Read other 1 answers
RELEVANCY SCORE 36

Just wondering - where does the 12 GB RAM limit for the T440s come from? Is it related to the motherboard or BIOS or the operating system? (for example, if I run 64 bit Linux can I potentially enjoy 16 GB of RAM?)

Read other answers
RELEVANCY SCORE 35.6

Hi, I've run into a problem recently where I will hibernate (either by closing the lid or hitting the hibernate button) and the system will begin to hibernate (the blue screen comes up), however, almost immediately goes back to being on. I've noticed that after it comes up, things that connect to the internet have had their connection broken.

A few days ago (before this started happening) I was infected with the Windows XP Internet Security 2010 virus. I removed it with the Malware scan. It looks like it's gone, but I was wondering if maybe this had something to do with it?

Any help would be appreciated!

Read other answers
RELEVANCY SCORE 35.6

Hi,I have a T440s with touch display under Windows 10 pro. on initial start of the computer, touchpad and trackpoint usually work well, but after a couple of minutes the cursor just disappears and touchpad and trackpoint donīt work anymore, the only way to navigate then is the touchscreen. I already updated the driver and made a bios update, both didnīt help. Has anyone a good idea on that issue. Cheers, Jakob

Read other answers
RELEVANCY SCORE 35.6

Running into an issue where the machine completely powers down after undocking.  Drivers have been updated, battery has been swapped out and so has the docking station. Just curious if this is a board issue or a larger concern.  Any insight would be appreciated. Thanks, NALIT

Read other answers
RELEVANCY SCORE 35.6

I have a T440s
i keep having problems with connection to my router the computer keeps loosing connection and then I have to select the router and then the computer has to troubleshoot the wifi and reset the wifi. this has been going on from when I received the unit.
 
Moderator note: model added to subject for increased visibility.

Read other answers
RELEVANCY SCORE 35.6

I bought B140HAN01.2 from aliexpress but it turns out that it's 1.1. display is nice, colors are ok, much nicer then 1600x900 i had before but brightness is REALLY low.Is there a way to bump it up?i checked edid and it looks ok:# edid-decode /sys/class/drm/card0-eDP-1/edid :(
Extracted contents:
header: 00 ff ff ff ff ff ff 00
serial number: 06 af 3d 11 00 00 00 00 03 17
version: 01 04
basic params: 95 1f 11 78 02
chroma info: 87 e5 a4 56 50 9e 26 0d 50 54
established: 00 00 00
standard: 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
descriptor 1: 14 37 80 b8 70 38 24 40 10 10 3e 00 35 ad 10 00 00 18
descriptor 2: 00 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 20
descriptor 3: 00 00 00 fe 00 41 55 4f 0a 20 20 20 20 20 20 20 20 20
descriptor 4: 00 00 00 fe 00 42 31 34 30 48 41 4e 30 31 2e 31 20 0a
extensions: 00
checksum: a1

EDID version: 1.4
Manufacturer: AUO Model 113d Serial Number 0
Made in week 3 of 2013
Digital display
6 bits per primary color channel
DisplayPort interface
Maximum image size: 31 cm x 17 cm
Gamma: 2.20
Supported color formats: RGB 4:4:4
First detailed timing includes the native pixel format and preferred refresh rate
Display x,y Chromaticity:
Red: 0.6425, 0.3359
Green: 0.3134, 0.6201
Blue: 0.1513, 0.0527
White... Read more

Read other answers
RELEVANCY SCORE 35.6

Hey guys, this windows 8 Pro unit does not go to desktop so I was going to install from disk but at windows setup I am seeing a Lenovo_Recovery partition so how can I do the recovery instead of wiping the drive and reinstalling please?

A:Lenovo T440S Recovery?

Press F11 at boot:
 
https://support.lenovo.com/us/en/solutions/migr-4ufuyk

Read other 17 answers
RELEVANCY SCORE 35.6

I have a T440S that is still under warantty. The screen has a bright white spot about the size of a small led. It can be easly seen on a white bachground from several feet away. On a colored screen it appears as a spot of lighten color. It can not  be seen on a black background. I do not believe that this is a dead pixel. Is this covered by the Lenovo warantty? If not, how easy is it to replace the screen. Are screen whitelisted in the Bios? Can I upgrade this to a touch screen? The current screen is a AU OPTRONICS B140HAN01.2 Can I use any version of B140HAN01 or does it have to be the .2 version? I assume that the 2 refers to the version number.

Read other answers
RELEVANCY SCORE 35.6

This is probably a simple problem, but I can't figure it out. Device: T440s running Windows 10 Pro Problem(s): If I unplug it from the power adapter, re-plugging it has the following effects--it does not recognize that it is plugged in, and the red light over the 'i' on the lid repeatedly flashes a fast sequence of four short flashes followed by a brief pause. It does this until the battery drains and then it shuts down. Adding some further confusion: It will not shut down or restart when plugged in. It will sit on the blue, "Shutting Down" or "Restarting Windows" page for as long as I leave it. I have to force it to shut down by holding down the power button until it turns off. And yet further confusion: If, while it is turned off, I disconnect the external battery and plug in the adapter, I get the standard three flashes to indicate that it's charging. I can then reconnect the external battery, and it charges like normal though the light gives me an occasional double-flash as it charges and the charger gets hotter than normal.So, I'm not sure if this is a bad adapter, battery, motherboard, or something else entirely. I'd like to fix it before my Macbook wielding colleagues catch on and give me grief. Any help is much appreciated.





DRJT400T400, 2.4 GHz P8600, 2G RAM, Win7 (32 bit)T440s, i7 4600U, 8G RAM, Win8.1 Pro (64 bit)

Read other answers
RELEVANCY SCORE 35.6

Hello, Iīve bought a refurbished t440s and my screen as some dark areas. You can see in the pic. Is this a malfunction from the LCD.Is worth to buy a new one?

Read other answers
RELEVANCY SCORE 35.6

Hi, I am using T440s from last two years. From last couple of days my T440s fan making loud noise and I am not sure what was the problem. I need the solution or any technical support for this problem and laptop is out of warrenty. Please suggest.

Read other answers
RELEVANCY SCORE 35.6

Hello All, i'm using my T440s laptop with latest Windows 10 proand my wifi driver is : Intel-Dual-Band-Wireless-AC-7260 Version : 18.33.7.2 i think it's the latest version my issue is sometimes the wifi connection getting slow and when i open task manager and see the performance of wifi connection i found that is no sent and recieve signalthis issue happen manytime for 2 or 3 min then it worked fine

Read other answers
RELEVANCY SCORE 35.6

First off, I am an Electronics Technician by trade.  I have 25 years of experience with all kinds of electronics.  This one has me scratching my head.  This all  started because I had an issue with my touchpad so I changed it out.  During the process I removed all power including, power cord, external battery and internal battery.  Replaced the mouse pad and put everything back together.  When I went to power it up I got no response.  Here are the things I have tried. 1. Hold the power button for a minute.  Tap it 10 times then hold anothe minute.2. Remove all batteries and press the power button for 1 minute.3. Remove all batteries and the RAM module and press the power button.4. Press the reset button through the cover on the back of the machine.   5. Lastly I disconnected the CMOS batter along with all other power.  The last step actually let me me boot up my machine and everything was working like normal.  I was happy I had fixed the problem, but I didn't.  Once I shut down the machine it still will not power back up.  I have to disconnect the CMOS battery again in order for me to powe up the machine.  Once the machine comes back I updated the BIOS to the latest version and that didn't help either.  I am stumped!  Any advice that anyone can give me is greatly appreciated.  

A:Thinkpad T440s won't power up

 It sounds like the power button.  Make sure the little cable is inserted all the way and is straight.  Also, the little board with the actual button might not be mounted correctly.

Read other 1 answers
RELEVANCY SCORE 35.6

Hi All, I have a T440s in an Ultradock with the monitor closed and three external monitors connected (1 HDMI, 1 DVI, 1 VGA). Everytime that i undock the laptop and open the display, the display stays black.  This doesn't seem to happen if i put the laptop to Sleep, undock the laptop, and then turn the machine back on.  The only solution after undocked is to do a hard shut-off (losing any open data) and then turn the laptop back on. I've used the Lenovo Updates and Drivers application as well as the support website to validate that the Intel HD Graphics drivers are on the latest version. Any help is appreciated!  

A:T440s Display off when undocking

Hi Fightnaggie08,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that you are facing the issue with Display issue on ThinkPad Ultradock with ThinkPad T440s.
 
Regarding this issue I suggest you to check with updating the ThinkPad Ultradock firmware to resolve the issue.
 
Please click here to visit the link to know the steps on how to perform the firmware update.
 
Hope this helps. Do post back if issue persists!
 
Best regards,

Hemanth Kumar

 




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 35.6

We bought several T440s machines at our school.  So far, I've seen 4 units where you open the lid and it will not power on...it has 3 LED lights on FN - F1 - F5 I have to pop the back battery and press the reset Does anyone know WHY this happens?? Windows 10 Pro 64

Read other answers
RELEVANCY SCORE 35.6

Hi, I'd like to upgrade the BIOS on my T440s from the original version [GJET83WW (2.33 )] to the latest available here as a CD ISO [GJET92WW (2.42)].How can I do this without using a CD drive? As an aside, I'm running Linux, not Windows, but that shouldn't matter for the BIOS update... Cheers. 

Read other answers
RELEVANCY SCORE 35.6

What new models in the Lenovo range are there that boast the same excellent features of the T440s - specifically: two batteries providing a whole day of power even three year's later!a 14" (or 13.3") screenminimum 12GB RamBut I'm asking for more than just technical specs ... has anyone had any experience with a newer Lenovo laptop that would rival the T440s?

Read other answers
RELEVANCY SCORE 35.6

Hi, I have a t440s which has been running great until very recently.  Now every time I undock the computer it immediately shuts down. Any idea how to fix this? It works when docked and on battery just when i undock it shuts down.










Solved!
Go to Solution.

A:T440s shuts down when i undock

Hi Dsc,
 
Welcome to Lenovo Forums.
 
Undocking a portable computer while it is in either standby mode or hibernate mode can result in data loss and system instability. To avoid loss or damage, use Undock to undock your computer, or shut down the system and undock the portable computer while your system is off.
 
How exactly are you undocking the computer? Are you undocking the computer using undock option?
 
Also, please update the latest BIOS.
 
Let us know how you get on.
Regards,
Shashi
 
Tap that Kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

Read other 3 answers
RELEVANCY SCORE 35.6

After a while of operation the computer temp rises substantially (CPU core temp goes upto 98 deg celsius!). Mostly seen after computer goes to sleep and wakes up. How would I solve this issue?  

A:Lenovo T440s CPU overheating

If you are still under warranty, call support.  (1-800-426-7378)  Don't take it apart.  If warranty has expired, the first step is to clean the vents and reset the fan with new thermal paste.  Here is the service manual:
https://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/t440s_hmm_en_sp40a25360_04.pdf
 

Read other 1 answers
RELEVANCY SCORE 35.6

Hi, I'm aware I'm not the first one asking this question, but none of the proposed solutions in other threads worked for me so far. Problem: the Touchpad can only perform a leftclick and rightclick but it cannot move the cursorSetting: T440s, Windows 10 attempts:- uninstalling driver and installing Synaptics driver (no effect)- installing Windows Updated (no effect)- updating BIOS (no effect)- disabling device in devmgmt and rebooting (curser can be moved while pressing the touchpad down) reenabling and rebooting (cursor cannot be moved anymore)- disabling and reenabling touchpad in BIOS (no effect)- reverting to an older driver version (no effect) and updating driver again (touchpad works for a couple of seconds as it should, even the cursor is moving! Then it stops again )- uninstalling driver and let Lenovo System Update do its job (no effect)- refreshing Windows (no effect)- completely formatting harddrive and reinstalling Windows from DVD (no effect) then trying all of the above again (same effects) I know its not a hardware failure, because when booting Ubuntu the touchpad works just fine! Settings->Touchpad->Additional Settings->ThinkPad shows the Touchpad in Grey. The Dropdownbox "Pointing Devices" only offers "Use Trackpoint Only" and "Use Classic Trackpoint Mode Only". This does not change at any time while performing actions listed above. Both selections where tested after all of the attemps listed above, none showed any effect.&n... Read more

Read other answers
RELEVANCY SCORE 35.6

Something is wrong with the keyboard my 3-year old T440s. Windows 10 hangs on start-up. Pressing Enter key doesn't go into BIOS at start-up. Pressing F1 does take me to BIOS but within BIOS no other keys work, enter, arrow keys, F9, F10 all don't work. On the other hand, it seems that the Fn key is always in effect -- pressing space key can change the keyboard light (which was supposed to be Fn+space). Any idea what the problem could be? At least what can I do first so that Windows 10 can be loaded?

Read other answers
RELEVANCY SCORE 35.6

Hi AllIs it possible to replace a touch screen on a T440s for a standard LED ? are the connections the same

Read other answers
RELEVANCY SCORE 35.6

I have 3 Dell U2414H monitors that support DisplayPort 1.2 daisy chaining.  I purchased the T440s with docking station.  The laptop arrived before the dock.  It has Windows 8.1 Pro x64 running.  I setup the monitors to daisy chain off of the T440s miniDP port.  I got exactly as I should.  3 separate monitors.  I could maximize windows inside a monitor and they'd maximize to their monitor.  I could drag windows between monitors.  Everything is working. When the dock came in (today) I left the monitors daisy chained.  I did change out one cable (that I know is working) so that the DP input would attach to the dock's DP output.  I am not getting a picture on the monitors.  If I use just one monitor, and turn off DP1.2 (in the monitor's menu), I get a picture on one monitor.  Do these docks not support daisy chaining?  I've verified that I'm on FW 2.17 for the dock.  I also want to submit a support ticket with Lenovo, I just don't know how to do that yet.  Thanks!













Solved!

Go to Solution.

A:UltraDock for T440s + DP1.2 Monitors

I'm seeing the same issue, same monitors. If I plug in the DP cable directly to the laptop and it works fine. If I go through the dock, it doesn't work. I'm using Win7

Read other 9 answers
RELEVANCY SCORE 35.6

 My T440s webcam stopped working. I'd appreciate troubleshooting suggestions. It seems to have failed after the Win 10 1607 update, but I can't pin down the timeline to be sure. Symptoms:Skype and Camera app both show camera icon with diagonal line instead of image:?.Green light comes on when software tries to use cameraWindows registry trick to fix much publicized USB webcam issues with 1607 does not help.Details:Windows 10, update 1607.Device Manager shows Integrated Camera "SunPlusIT", "working properly".Driver 2016-03-07, ver 3.5.7.25.  Windows update says that is the latest.For those interested I've pasted the events logged from this device below, all of which are timestamped to the time that the 1607 update was done. Thanks for any help.  Events logged:Device USB\VID_04F2&PID_B39A&MI_00\6&86b9249&0&0000 requires further installation.Device USB\VID_04F2&PID_B39A&MI_00\6&86b9249&0&0000 was migrated. Last Device Instance Id: USB\VID_04F2&PID_B39A&MI_00\6&86b9249&0&0000 Class Guid: {6bdd1fc6-810f-11d0-bec7-08002be2092f} Location Path: Migration Rank: 0x0 Present: trueDriver Management has concluded the process to add Service SPUVCbv for Device Instance ID USB\VID_04F2&PID_B39A&MI_00\6&86B9249&0&0000 with the following status: 0.Driver Management concluded the process to install driver spuvcbv.inf_amd64_42621fadb3577e9b\spuvcbv.inf for Device Instance ID USB\VID_04... Read more

A:Troubleshoot T440s webcam

Nothing like posting a question to make me think of an answer. The older driver from Lenovo solved the problem:Package Sunplus / Realtek Rev. Issue Date
-------- ------------------------- ---- ----------
1.0.0.10 3.4.7.36 / 6.2.9200.10252 03 2015/09/11 

Read other 1 answers
RELEVANCY SCORE 35.6

Hello! I have following issue with my new T440s' speakers:a) having generic audio driver, there is silent noise everytime some sound is played approx. for 5 secondsb) having most recent Realtek there is permanent the same noise unless it is muted using Fn+F1. Only "software mute" doesn't work. I have Windows 8.1 x64.I tried some googled tips with disabling the microphone but none of them has worked. This is very annoying, since there is SSD and ULV this is the only noise this laptop produce. Thank you! Drozi

A:T440s speaker noise

I have exactly same problem. However, I don't think that this is driver problem since this buzzing is heard even when laptop is in bios. From what I can tell, sound(buzzing) is comming directly from speakers.(both of them) And you are right, it is extremly annoying and it is killing this otherwise very quiet laptop.

Read other 9 answers
RELEVANCY SCORE 35.6

I have an issue with my new T440s, Win8.1 Pro fully up to date with the latest Synaptics 18.0.7.40 driver from the Lenovo update. I am using a freshly installed copy of Windows rather than the provided image. Sometimes when working with the touchpad and clicking the pad down to drag something, it's as if ClickLock has been turned on from the mouse control panel settings, where it acts like the mouse button is held down until you click (not tap) it to release it again. ClickLock is turned off in the control panel. I found that the issue is greatly reduced (but not gone) if I turn momentum all the way down under Advanced -> Motion. This is driving me nuts as it's seemingly random. If I click and drag to select text then go to move the cursor, sometimes it acts like the mouse button is still held down and I change my selection. Or, sometimes I just want to move my cursor and it ends up dragging something or selecting text. Anybody else experiencing this? Lenovo please can you sort this out. I find myself using the touchscreen more and more as it's simply more reliable than the trackpad!

A:T440s Trackpad - ClickLock bug

Still experiencing this, but not heard anyone else mention it?About 25% of the time when I drag to select text by pressing down the pad, it still acts as if the button is held down after I let go and I have to click it down again. The fact it is so unpredictable is so frustrating, I end up having to double tap the pad to start a drag motion instead.

Read other 3 answers