Over 1 million tech questions and answers.

S510P fan runs high every time after wake from sleep

Q: S510P fan runs high every time after wake from sleep

Each time I put my laptop to sleep, when I wake it, the fan runs high continuously. This started about 6 months ago. Finally decided to check here if anyone has this issue, or has resolved it before.Thank you

Read other answers
RELEVANCY SCORE 200
Preferred Solution: S510P fan runs high every time after wake from sleep

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 70.4

Hi,

I recently started getting BSOD every time I wake from sleep.

The blue screen error says BAD_POOLER_CALLER.

The only new hardware I added was the hard disk I replaced 4 months ago.

Attached is the dump and system information.

Appreciate your kind help.

Thank you.

Read other answers
RELEVANCY SCORE 70.4

I've got an HP XP pc that the cpu cooling fan runs on high as soon as the pc boots up. I pulled the side cover off to see if the fins were dirty but they are clean, plus it does it on a 'cold' startup. This started after I left it on all night a few days ago. I also noticed that it is slightly slower than before. I have run my virus scan and Malwarebytes but no change.
I'm affraid there is a cootie in there somewhere, where do I start?
 

A:Fan runs on high all the time, even on first startup

Look at the cpu usage and what is causing high cpu, assuming it is high cpu.
If it is not then well, thats a problem more serious.
 

Read other 1 answers
RELEVANCY SCORE 68.4

Here's my issue:

Everyday at 0400 my computer (Windows 7 x64 Ultimate) wakes from sleep.

What I have already done:
}Checked "Scheduled Tasks;" nothing is set to run.
}Checked programs that run in the task tray for automatic update / scan settings; nothing is set to run.
}Checked Wake-On-LAN settings, WOL is completely disabled.
}Checked hardware that is allowed to wake the computer; everything is disabled.
}I have looked in the "Event Viewer;" there are many entries, but the most recent entry at exactly 0400 follows:

>
- System

- Provider

[ Name] Microsoft-Windows-Kernel-General
[ Guid] {A68CA8B7-004F-D7B6-A698-07E2DE0F1F5D}

EventID 1

Version 0

Level 4

Task 0

Opcode 0

Keywords 0x8000000000000010

- TimeCreated

[ SystemTime] 2010-06-08T10:59:59.502000100Z

EventRecordID 41206

Correlation

- Execution

[ ProcessID] 4
[ ThreadID] 44

Channel System

Computer Blue

Security


- EventData

NewTime 2010-06-08T10:59:59.500000000Z
OldTime 2010-06-08T05:35:25.616006700Z
<

I'm not sure if that helps at all, there are a few more events in there that follow within seconds of this, mostly services stopping and starting. I just cannot figure out what keeps causing this.

Also: Tonight I will try closing ALL my open programs, if that doesn't work I could disable all my services and figure out if... Read more

A:Wake From Sleep, Same Time Every Day, Not A Scheduled Task, Possibly A Service?

Hi -

You seem to have covered areas I would have suggested.

Is SP2 in along with all Windows Updates?

www.update.microsoft.com

Validate your Windows 7 installation -

www.microsoft.com/genuine

Regards. . .

jcgriff2

.

Read other 8 answers
RELEVANCY SCORE 68.4

My primary drive is a kingston SSD and since iv installed windows 8 its not been able to wake up from sleep without freezing and causing BSOD it used to not even produce DMP files but hs recently with I will upload the content

any help would be appreciated I have recently reinstalled windows to help fix the problem which was unsuccessful

I hope its not a hardware issue as I built the computer myself and heard from a fourm that it could be the ssd but have no idea

Thanks
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols

Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (6 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16864.amd64fre.win8_gdr.140309-1509
Machine Name:
Kernel base = 0xfffff800`e601f... Read more

Read other answers
RELEVANCY SCORE 68

My PC is fairly new and I'm having problems with slow shutdowns/restarts and slow sleep/wakes. Recently it seems to fail waking altogether and restarts after a while instead. Usually during waking I just have a black screen for a long time before the reset/restart but sometimes I see the Windows log-in screen but it's unresponsive.
The problem predates my CPU undervolting and doesn't seem to change when I switch RAM settings back to Auto instead of XMP (I my RAM necessitates some kind of overclock in order to function at its rated speed).

Can anyone advise how to proceed? Thanks.
System specification below. This forum has a fantastic design that eliminates the form of pasted lists of information. That's just great for preventing people from reading it. I was worried someone might have read this information.
OS: Win 10 Pro 64-bitMainboard: ASUS Z170 Pro GamingCPU: Intel i7 6700 (6th gen), Stock HSF, Undervolt Offset -0.15 V, LLC 4RAM: Corsair LPX Vengeance 2x8GB DDR4-3000 (CMK16GX4M2B3000C15)Graphics: Gigabyte NVIDIA GeForce GTX 950Sys Drive: Samsung Evo 750 SSD, 250 GBData Drives: OCZ Vertex 2 SSD, 60 GB; WDC WD1002FAEX-00Y9A0, ~1 TB; WDC WD2003FZEX-00Z4SA0, ~2 TB; WDC WD2002FAEX-00MJRA0, ~2 TB; RAID 0, ~300 GB [Maxtor 6B160MO x 2]PSU: XFX TS 750W (P1-750S-NLB9)Bluetooth: Parani UD100 Bluetooth USB AdapterMonitor: LG 21.5" W2246S-BF 16:9 Wide LCD Monitor 1920x1080 5msLogitech G500 mouse, K120 keyboard.UEFI BIOS divergence from optimised default settingsAI Overclock Tune... Read more

Read other answers
RELEVANCY SCORE 67.6

Can anyone explain why the event viewers reported time for a sleep wake event is different to the event. e.g. in the attached I woke the PC at around 7 this a.m. but I also put it back to sleep at midday and it woke it again around 3; it seems (maybe coincidence) to be reporting the prior event?

k.

Read other answers
RELEVANCY SCORE 67.6

I have a p50s running windows 7 (64 bit)... I just updated my bios two weeks to 1.22 and I am now having issues with my computer waking from sleep. The computer goes to sleep within 15 seconds of initiating sleep. I do not have an issue waking the computer from sleep if it has only been sleeping for a couple hours. However, if I leave it overnight or over the weekend without waking it, I get the login screen to input my password, but it takes almost 5-10 minutes for the computer to recognize typing my password. Once it recognizes my password, it logs in and I do not have any issues.If I hold the power button and shut the computer down and restart, select "Start windows normally" -- it recognizes typing my password and launches immediately. I do not have hibernation or hybrid sleep as an option in my power settings, so that could not be the culprit.Any help would greatly appreciated!

Read other answers
RELEVANCY SCORE 67.6

My computer is to be having some problems booting when it has been asleep/hibernating/turned off. At first it seemed to be just when it had been asleep or hibernating, but recently it wont boot after being turned off for a short while (an hour or so).

What happens, is that after turning it on, I get a "No signal" message on my monitor, and nothing shows up on it. The computer turns on, it makes the usual noises, but no signal comes through to the monitor.

The only way I can seem to get it started after this is if I leave it unplugged for a while, usually at least an hour and a half or so, then it will either boot from scratch or resume Windows from sleep/hibernation.

I never have the problem turning it on at the beginning of the day when it's been off all night, so it's as if it needs to be off for a long while for some reason.

I'm running Windows 7 Ultimate 64-bit on an AMD A10-5800K and Gigabyte F2A85X-D3H, with 8GB RAM.

Thanks in advance for any help you can provide

A:Windows wont wake up from sleep, hibernation or turned off for a short time

Before going too deeply into this, if the light on the monitor is lit, try a different cable.

Read other 2 answers
RELEVANCY SCORE 67.2

W7 PC wakes up from sleep every few minutes. It didn't use to. I am the builder / owner / sole user. Investigation done so far at the DOS prompt to establish the cause:

powercfg -devicequery wake_armed
(no results returned)

powercfg -waketimers
There are no active wake timers in the system

powercfg -lastwakeWake History Count - 1
Wake History [0]
Wake Source Count - 0Other ideas to try and establish the cause with please?

Many thanks.

Read other answers
RELEVANCY SCORE 64

Hi, I'm using Windows 10 pro on S510p, it's wokring well but there is 1 serious issue.When I close the lid of this machine, it goes to sleep, but after few hours the machine wakes up and then it shut itself down (not going back to sleep mode) so the next day when I power the machine, it doesn't resume from sleep, it starts a complete boot. Are there any settings to make the machine full sleep without waking up? (it's not connected to an Ethernet so there is Wake on Lan or something).

Read other answers
RELEVANCY SCORE 61.6

Hi,

I am new here. Hoping someone can help me out with this issue. I work in IT so am not a complete computer bonehead and am at my wits end with this.

My laptop is about 4 years old, it's a toshiba. For whatever reason, it started taking 5+ minutes to wake up from sleeping. If it sleeps for an hour, it's OK.. but if you leave it sleep all night and try to wake it up in the morning, it's quite cranky. After the 5+ minute wake up, it performs as normal. It was running Windows 7 Home 32 bit.

Troubleshooting steps that I have taken are as follows.

Reinstalled windows. Issue was resolved! but after about 2-3 weeks, issue came back. I thought maybe it was some type of windows update, so I reinstalled windows again and paid closer attention to the updates. Issue presented itself again after 2-3 weeks, and there were no updates immediately done prior to it starting.

I started to think maybe it was something related to my hard drive, so i performed laptop surgery and swapped out my original hard drive with a solid slate drive, and installed windows 7 Ultimate 64 bit (this laptop can support 64 bit so I figured why not upgrade.).

issue again was resolved for a few weeks, and now it's back to taking 5+ minutes to wake up again.

If you're turning the laptop on from scratch, it takes 10-15 seconds tops. if you're restarting, it's 10-15 seconds tops (man, I love SSD...)... if you're waking itup within the hour, its 1-2 seconds. But anything longer then that, 5+ minutes.

It ba... Read more

A:Laptop extremely slow to wake up from sleep mode, 5+ minutes to wake

Hi there, have you ran any malware/anti virus scans?

Read other 9 answers
RELEVANCY SCORE 61.2

I have a Dell Optiplex 755 with WinXPPro SP3, 2GB RAM and an Intel Core 2 Duo E4600, and it is unreliable for Wake on LAN and Wake on Ring. I also wonder whether my Standby - Sleep - Suspend (S1 or S3) is working correctly.

When the PC is in Standby - Sleep - Suspend mode (S1 or S3), Wake on LAN and Wake on Ring work some of the time but not all of the time, and I'd like them to be 100% reliable.

These may be two different problems, but your advice will be appreciated. (Also, if I should post in a different forum, please advise.)

My Network Card is an Intel 82566DM-2 Gigabit Network Connection, and I recently upgraded its drivers using "generic" PROXP.exe from the Intel website, although this has not helped the problem. The specific driver file e1e5132.sys is now from 2009 -- it used to be from 2007. But, as I say, Wake on LAN from Standby was not and is still not reliable, both before and after the driver update.

In Settings .. Network Connections ... Local Area Connections ... Properties ... Configure ... Power Management, all the Wake on LAN options are checked ON:

- Wake on Directed Packet
- Wake on Magic Packet
- Wake on Magic Packet from Power Off State
- Wake on Link

The NIC card's Diagnostic checks are all OK.

My fax modem card is a Conexant D850 PCI V.92 Modem, and I have the most recent drivers dated 7/27/07, version 7.67.0.50. In Settings ... Phone and Modem Options ... Modems ... Properties, "Allow this device to bring... Read more

A:Trouble with Wake on Ring, Wake on LAN and Standby - Sleep - Suspend

More to above: Dell has suggested I must re-install Windows. I've never done that, and I realize I'd probably lose all my applications and data - no good. Seems to me that's like using an atomic bomb to kill a mosquito. And why should I assume that will work?

But is there a way to re-install -- or maybe fix -- Windows that leaves everything else safe?

FYI - About a month or so ago, I ran SFC (System File Checker) in repair mode, and that didn't help with this problem.

Any ideas?

Read other 1 answers
RELEVANCY SCORE 57.2

I have an issue with the sleep function. The computer does not awake from sleep. When I try to do it, it behaves as if it was waking, but it never ends and there is only a black screen; the mouse and keyboard are inoperative. The only thing possible to do is a hard reboot. When it boots, it shows a notice with a minute report (in the zip file) usually saying there was a blue screen, but I NEVER see any blue screen at all.

I know the power configuration is OK because I have always used the same scheme. A powercfg ?energy report shows several errors and warnings. They refer to USB and PCI (vendor 1002=ATI motherboard), but I don?t know how to repair them.

I downloaded the drivers downloader from Rrecipester.org and downloaded and installed the drivers. They are all Broadcom Corporation signed, the brand of my USB Bluetoth attachment. I rebooted after installing, as recommended. Run powercfg ?energy again and got the same report issues (in the zip file). I don?t think the processor utilization warnings to be very important because they are low and sporadic picks. It has been like this for some time now, so I don?t have a restore point. Can someone help and tell me what I can do so solve this issue, please?

Files uploaded in the attached zip:
. Windows warning after reboot
. Windows dump and xml files (2 = 1 each)
. Powercfg -energy report
I wanted to correct the thread title, but was unable to do it. Maybe someone else can do it.

A:No Wake From Sleep BlockedI have an issue with the sleep function. T

Quite confident it's a driver issue, it will be very difficult to troubleshoot from the one included dump file though as it's incomplete and inconclusive.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 000000000000109b, (reserved)
Arg3: 0000000004440006, Memory contents of the pool block
Arg4: fffffa8007c481b0, Address of the block of pool being deallocated

Debugging Details:
------------------

***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

Cannot get _POOL_TRACKER_BIG_PAGES type size
Cannot get _POOL_TRACKER_BIG_PAGES type size

POOL_ADDRESS: fffffa8007c481b0

BUGCHECK_STR: 0xc2_7

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffffa80036544e0 to fffff800038c2d40

STACK_TEXT:
fffff800`00b9c360 fffffa80`036544e0 : 00000000`00000000 00000000`000007ff fffffa80`... Read more

Read other 9 answers
RELEVANCY SCORE 57.2

Whether I choose any option other than to turn PC off, instead of tapping spacebar on my MS wireless keyboard I have to tap the button for power on the tower, then the monitor turns on as the fan runs, but always a black screen. So then I have to do a manual boot and select to start normally.
 
Started a week ago, around the same time as a graphics card failure. I installed a new PNY GeForce, updated ALL drivers on my Gateway DX4710-UB301A, (Win 7 Home Premium 64-bit, AVG antivirus free 2014) played with power management and startup config settings, trolled forums, performed malware scans, and still can't figure out the issue. 
 
Please help!

Read other answers
RELEVANCY SCORE 54.4

I was on FB, shut lid to laptop and came back to it after eating supper. The computer acted frozen. Then it said no connection. Sometimes we do have to turn our U-Verse off and try again so I did. Still nothing so I shut down by holding my finger on the shut off button for a few seconds. When I turned it back on the first of 3 screens came up and I swiped on my touch screen and it did go to the second screen where I put my pin in. It pops up HP with the thinking circle then goes to the third screen which is a black or sleeping screen. I had family and friends give advice....We have tried taking out the battery and using just the power cord, didn't help. A friend tells me the third screen has gone into sleep mode and something is running in the background. He doesn't know how to wake the screen so we can use task master to shut down running programs. He also says when We shutdown it is not completely turning off. He googled and did say it has been a problem sometimes with update......I just want to try and figure out how to wake up the screen so I can work on the other issues. Thanks.

Read other answers
RELEVANCY SCORE 52.8

Hi all,the time on my newly purchased yoga p40 runs faster than the actual time. I did change the settings to "update time automatically through internet", but this does not work. Every day the clock on the laptop runs around 10-15 minutes faster than the real time. please help,thanks 

Read other answers
RELEVANCY SCORE 52.8

Hi all,the time on my newly purchased yoga p40 runs faster than the actual time. I did change the settings to "update time automatically through internet", but this does not work. Every day the clock on the laptop runs around 10-15 minutes faster than the real time. please help,thanks 

A:Yoga p40 - Time runs faster than actual time

Hi there, Fabriceknecht -  
 
Thank you for writing in to the Lenovo Forum - happy to have you here today.
 
I would suggest looking at your notebook BIOS page, check to make sure the clock date and time is accurate.  Also - check for updated BIOS files, then flash to newer BIOS if present. Most of the time this can work to resolve this issue, if nothing helps, it may need to be sent to a service center for hardware replacement.
 
Update us how it goes.
 
 
 
 
Regards,
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

Read other 1 answers
RELEVANCY SCORE 51.6

It takes like 3 seconds to open the file explorer when the laptop is brand new and has i7 7700HQ, 16GB RAM, Nvidia GTX 1060 6GB...

What i've done:
Scan for malware
Check for disk errors
Reboot (?)
Optimizers

Haven't installed anything weird lately... Any ideas?
 

A:High response time on new high-specs computer

LOL NOBODY ANSWER TO THIS THREAD, BUT DO NOT DELETE IT SO PEOPLE CAN REALISE THIS.

Apparently, Nvidia laptops include some power boost options, so when you disconnect the laptop from the electricity, performance will drop significantly in order to save battery. This will include general OS performance as well as games FPS. Fixed by connecting the laptop lmao.
 

Read other 2 answers
RELEVANCY SCORE 51.6

Greetings.  I have a T61 that won't wake from sleep. Situation:Put PC to "sleep" using Fn+F4, closing lid or let it go to "sleep" via system timerPC will not wake upon opening lid, using Fn+F4 or power button.We're forced to either 1) hold down power button (which forces a reboot), or 2) (when that fails), unplug from wall AND remove battery.System:T61, 7664 RYU, Bios 7LETC6WW (2.26)VistaAll Microsoft and Lenovo patches installed and current Notes:Don't have a restore point we can refer back to.Don't want to have to burn it down and start over.My hunch is that there is a conflict somewhere in the registry (maybe between what the bios thinks and what the registry has)?I'll PayPal you $25 if your solution fixes it....  Seriously. Many thanks.  

A:T61 Won't Wake From Sleep

Hi, I have the same problem and have tried all the fixes...none work.  If you get a solution please let me know! Thanks,[email protected]

Read other 4 answers
RELEVANCY SCORE 51.6

I am using a wake on lan app on my ipod so i can wake my computer from sleep. Im running into a problem though. When i go into configure my network adapter, and go to the power management tab, if "allow the computer to turn of this device to save power" is unchecked, the app works, but when the computer comes back on it cant connect to the internet, if it is checked, the app doesnt work, but when the computer turns back on the internet works. Any ideas on how to solve this problem, so the internet will work when it wakes and the app will work, thanks!

A:help with sleep / wake on lan

Actually i dont think the internet is working with either setting. After short periods, like 5 minutes or less, the internet still works, but after longer periods, when i wake it the network has limited connectivity or doesnt work entirely.

Read other 2 answers
RELEVANCY SCORE 51.6

Hello Eight Forums,

New HP Notebook. One month power on. W8.1 64bit

Setup with Classic Shell and Fast Startup Off

Have to decide next week. If I should return for new machine exchange or keep with two known issues.

1) Sleeps on timer okay. Just cannot wake from Sleep. Tap space bar. Black screen goes gray. Times to black.
Noticed ethernet lite not on. Plug is clear plastic with white led normally on and on during startup.

Suspect power to NIC not satisfied so, no wake from Sleep. Have to force shutdown. Startup is normal. Forced shutdown is not flagged prompting startup options.

2) igfx Tray Module has stopped working pops dialog box on some startups.

HP and I have been round and round. HP wants me to contact Microsoft. We all know that's not fun. HP is bad enough. Always leaving remote session with machine worse for the experience.

HP went through settings and drivers. HP un-installed, re-installed over-installed and updated drivers till they were exhausted. Using HP Support Assistant and pulling soft paks from HP.com.
Then came the requisite System Recovery. Then came more BS.

Yesterday, after a Device Manager graphics driver un-install / install. Windows Update offered it's two cents with an Intel HD Graphics update.

I can return to Staples for new same machine. No harm. No foul. No cost. New warranty period.

Machine worked no issues afaik for two weeks. Then BIOS and UEFI manual pull updates via HP Support Assistant. No issues.... Read more

A:New W8.1 cannot wake from Sleep

Geez, not even a Welcome

HP referred me to Microsoft. Microsoft referred me back to HP
M$ did offer me fee based support. No guarantee my system would not be left as a door stop.

So, whose responsible here. HP the vendor of M$
Or, M$ the author of W8
Or, Intel
Or, one of the umpteen needless Windows apps that came pre-installed.

If I want Netflix. I can get em' without a Tile.
If I want the weather...well, you can follow where I'm going.......................

Not even a Welcome ~

Read other 4 answers
RELEVANCY SCORE 51.6

Hi,

Hoping someone can help me with this.

I installed 7RC a couple of months ago. Since then whenever my pc sleeps I can not wake it up. It used to wake up fine in XP.

To get it going again I have to cold reboot or pull the plug. When it comes back up everything I was doing is still there, I just have to enter my password.

I think I have all the settings right but if someone could run me through everything that needs to be set I'd be really grateful.

Thanks in advance.


Rich

A:PC Won't wake from sleep

Mine is the same and takes about 2 and a half mins to wake up

I have my bios set to wake up on double mouse click, it does wake up eventually

Should be fixed in the official release!!

Read other 9 answers
RELEVANCY SCORE 51.6

Since installing SP1 my computer has been acting like a one year old. When I put it to sleep at night it keeps waking and then goes to sleep only to wake again. Left untouched it went through this cycle all night. Starts 20 seconds after I put it to sleep and stays on for 2 minutes and then goes to sleep for 20 seconds then wake for two minutes etc etc etc.I disconnected a flash drive that I had in a USB port.
I disabled "wake timers" under Sleep in Power Options
I disabled "allow this device to wake the computer" in the properties of the USB wireless mouse
In the properties for the network adapter under the "Advanced" tab I disabled the "Wake on Settings". That fixed the problem but then I couldn't wake my computer with Logmein and I think Orb is disabled.
Noticed when I went back that there's another tab "Power Control" for network adapter. I disabled "allow this device to wake the computer" and changed the Advanced tab "Wake on setting" to "OS controlled".
Now when I put it to sleep it seems to stay down. I'll update tomorrow if it misbehaves tonight.

A:Sleep Wake Sleep Wake

If you think it might be the network card, you can always open a cmd prompt and run powercfg -lastwake to see which device was logged as waking the machine last.

Read other 3 answers
RELEVANCY SCORE 51.6

My computer can go to sleep mode. But upon wake up, it will stuck there with no video signal. I can see the fans are moving, cd and hd seems working. I have the latest bios installed and have tried different settings. Any thoughts?
This is my spec:
MSI Neo2 P35 with intel e2180
evga 8600gts
4gb ram.

A:Help with sleep wake up

Do you also have the latest driver for your video card?

Read other 9 answers
RELEVANCY SCORE 51.6

Hi,
I've been running Windows 7 Ultimate for the better part of a year now. For about the last week or so now, my computer is going in to (what I assume is) sleep mode at the most inopportune moments. No amount of anything will wake the computer from its sleep - not the keyboard, mouse, ethernet activity (which should keep it from falling asleep in the first place) - only a hard reboot will bring my PC back to a state where I can use it.

Some of the things I've tried, so that people don't answer with "change your power plan settings" or some such thing. If it was that easy, I wouldn't be here asking for help. I'll restate that I've been using the same Win7 Ultimate install on the same PC for a year now, and it's only in the last week this has been happening.

Anyways, I have:
Verified all my power plan settings;
Disabled any screen saver;
This is an older desktop, not a laptop, so hibernate and hybrid sleep options are not even present. Nevertheless, I've followed this guide and this one for disabling both.
Used device manager to specify my keyboard, mouse, and ethernet card as "wake up" devices. Also used the command line to manually set these as "wake from any state", only to have them all not work.
Tried changing group policy and eliminating sleep/hibernate from the user group.
As I said, it's only been doing this for a week or so now. All my drivers are current. All my system updates are current. I haven't installed any new software. I was ... Read more

A:A sleep I can't wake up from.

Did you try system restore? Actually sounds like a bad power supply. Good luck to you.

Read other 4 answers
RELEVANCY SCORE 51.6

So it sleeps no bother normally but it seems that if my htpc has woken it with a wol magic packet, it will not go back to sleep , ever unless manually put to sleep. Rebooting and automatic sleep works again. I recently reinstalled windows and have looked atvevery setting I can think of. Including unattended sleep timeoutvin gpedit which I have tried not config and set to one min. Powercfg shows nothing.

A:no sleep after wake on lan

I have been searching the internet and it seems that this situation is unique.

To clarify, sleep works fine but if the computer is woken with a magic packet from any source it does not then go back to sleep after inactivity. Even the monitor stays on.

In gpedit I have tried disabling allow applications to prevent sleep under power options with no change.

Anybody got any ideas, this is driving me crackers!

Read other 9 answers
RELEVANCY SCORE 51.6

My computer will go into sleep mode (sleep, hibernate, and all power off settings in the power setting are disabled) and it will not wake up. Preform a hard reboot and it beeps once every second without getting through post. Leave it alone for a few days and it's fine boots as normal. Last for a day or two then happens again. Any one got any ideas?

A:Sleep will not wake

Hi @Cbwesson, and thank you for your post.Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that your computer is not waking properly from sleep. I am happy to help with this. Please post the full product number and operating system in use on your computer. See the following, if you need help with that information.How Do I Find My Model Number or Product Number?Is the Windows Version on My Computer 32-bit or 64-bit? For now and assuming that you are using Windows 10, give this a try: HP PCs - Sleep and Hibernate Issues (Windows 10, 8), and let me know how it goes. I look forward to seeing your response, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.

Read other 6 answers
RELEVANCY SCORE 51.6

I'm running Snow Leopard on my iMac which is wirelessly connected to the house's router with Airport. The PC is connected directly to the router with the ethernet cable. It is a fairly new computer, running Windows 7. It is an Acer, 2.something GHz processor. Is there any software that I can use on my mac to wake up my PC remotely from my Mac? Thank you.
 

A:Can I Wake My PC From Sleep From My Mac?

Wake on Lan is just a magic packets to notify any WOL capable nic and computer to turn on or wake up. Just Google search for OS x wol.
http://www.readpixel.com/wakeonlan/
 

Read other 1 answers
RELEVANCY SCORE 51.6

driver me crazy:
my PC details :
MB : GIGA X38-DQ6 BIOS F9a
Menory: G.Skill DDR800 (1+2G) X2 =6 G 4-4-4-12
CPU: E6550
Harddisk : WD 3200YS
Vedio Card: LeadTeck PX8800GT
I can not stand 8800GT's 100% fan noice , so I order AC S1 (Rev2) heatsink to replace old one, replcace is good, the noice is down, and also control the temp to 43 degree,
then the story comes: I find VISTA Home P 64 SP1 Can Sleep , but when I try to wake up , the PC , CPU(Fan), Hardisk , VedioCard fan start working , but the LCD have no signal, and Wireless Keybord and mouse does not work .
I reinstall chip (MB)drivers and vedio card drivers ... ... still same problem.
I change DELL 2407 to Philips 190P stll no siginal...

I change BIOS From S3 to S1 , yes, it can wake up, but I need S3 !!!
I check the Device Manger, and find SYSTEM DEVICES -> PCI Bus Properties general say working properly, BUT resources menory range conflicts
pls. see the picsorry it is Chinese ) :
Powercfg /a says system support S3:


I am sorry my OS is Chinese, but I can NOT find answer from China, pls. help, if you guys need transfer into English, just let me know!
one more pic from DM:

A:S3 STR Sleep Can NOT Wake up

Hi Wufawutian,

Check this Tutorial for solving sleep problems...

Power Options and Sleep Mode Problems

Let me know the results
Steven

Read other 5 answers
RELEVANCY SCORE 51.6

Hi Guys/Gals

Never use sleep function but last night instead of selecting shutdown hit sleep by mistake. Couldn't get system to wake from sleep and had to turn off by holding power button.

Today when switching system back on i get fan & case lights on , hdd and dvd activity. The keyboard is unresponsive (no lights) and monitor remains in stand by. Mouse gets power but doesn't wake pc.

Using reset or power button on case just restarts system to exact condition above.

Can't contact pc manufacturer til monday (pc 4 months old). Read quite a few other posts regarding vista sleep issues but haven't found anything that would seem to rectify this problem.

Any comments/tips gratefully recieved

Karlos

A:Can't Wake PC From Sleep

Well I'm a beginner but I had a lesser important case than yours. I found you interupt a process of sleep if you try to wake it before about 5 seconds. Anyway, there are a couple of things you can try.

Unplug the power cord and plug it back in.

Pull out the wall socket thingy and put it back in.

Try doing something like booting into safe mode if you can.
The pc maybe still functioning but the monitor can't interact with it. Once you try to boot it, keep pressing F8 for about 10 seconds and then press enter. See if anything happens.

Could also be a shortcircut or something. Other people have had a similar problem.

Read other 12 answers
RELEVANCY SCORE 51.6

My Vista PC keeps going into sleep mode, or closes down. When I start it up again, it gets to a black screen saying continue restore, or re-start. Sometimes I get a blue screen with some sort of loading message on it, but on re-booting, it's ok. I 'googled' the sleep mode problem, and on one link it said it is commonly and registry error, and I needed to download a program to fix it. Can anyone help with the solution. Thanks.
 

A:Wake from sleep

Read other 7 answers
RELEVANCY SCORE 51.6

Hi group,When my PC (HP Pavilion) goes into "idle" - when I'm not using it - it will not wake back up. I get no video, and sometimes my mouse will not wake up either. When I disconnect my power cord and reconnect the computer, I am able to boot up and things work. The computer works fine as long as I don't let it go to idle. For example, when I shut it down, it will boot up fine the next time. This just started happening recently after two updates: one from Norton, and the other from Quicken. I have no idea whether one of these caused the problem. I keep my PC well-maintained with all the latest updates. I have run the power troubleshooter, as well as the updates troubleshooter, and both detected no problems. Open to any ideas you may have,Thanks,Jeff

Read other answers
RELEVANCY SCORE 51.6

hi-i am trying to enable wake my computer from sleep using the keyboard or mouse.i have checked all of the bios settings and neccessary power settings are all enabled.i ran the power-cfg cmd to check if my computer will allow itself to use these,and it stated that i could using s1 setting.however it still wont work.i checked on the internet,and one forum suggested it could be that i should check the option under usb root hub-"allow this device to wake computer from sleep".i cannot check any of these options as the box is grayed out.can anyone help?

A:wake from sleep

It may be that one or more devices in your system is/are not compatible with sleep mode, hence those options are greyed out.

Read other 1 answers
RELEVANCY SCORE 51.6

1st system
Windows 7 x64 7600 clean install, intel e6550 cpu, intel 965g motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more mornitors, 1.5gb memory

- no problems going to sleep or waking up, using either S1 or S3 as sleep state in bios

2nd system
Windows 7 x64 7600 clean install, intel i5 750 cpu, gigabyte p55-md80 motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more monitors, 4gb memory

- no problems going to sleep or waking up, using S1 as sleep state in bios

- no problem going to sleep using S3, however cannot wake up from S3 sleep. Pressing the power button produces a normal reboot instead of a wake up.

System 2 can sleep and wake up normally when using just the nvidia 6200. It is only when the 4670 video card is used in system 2 that S3 sleep becomes an issue. Doesn't matter if its by itself or paired with the 6200.

I have tried every sleep tweak suggested here in terms of modifying bios settings and advanced power settings. I've tried the radeon driver 9.9, 9.5, and 9.3 for win7 64. There are many reports of S3 issues with MSI motherboards in general, as well as with win7 ati drivers. Open to any suggestions. Thanks

A:Cannot wake from S3 Sleep

  
Quote: Originally Posted by johnhoh


1st system
Windows 7 x64 7600 clean install, intel e6550 cpu, intel 965g motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more mornitors, 1.5gb memory

- no problems going to sleep or waking up, using either S1 or S3 as sleep state in bios

2nd system
Windows 7 x64 7600 clean install, intel i5 750 cpu, gigabyte p55-md80 motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more monitors, 4gb memory

- no problems going to sleep or waking up, using S1 as sleep state in bios

- no problem going to sleep using S3, however cannot wake up from S3 sleep. Pressing the power button produces a normal reboot instead of a wake up.

System 2 can sleep and wake up normally when using just the nvidia 6200. It is only when the 4670 video card is used in system 2 that S3 sleep becomes an issue. Doesn't matter if its by itself or paired with the 6200.

I have tried every sleep tweak suggested here in terms of modifying bios settings and advanced power settings. I've tried the radeon driver 9.9, 9.5, and 9.3 for win7 64. There are many reports of S3 issues with MSI motherboards in general, as well as with win7 ati drivers. Open to any suggestions. Thanks


Hi,

Try Standby Tool, it solved all my S3 problems.
Here is the version for Win7.
In the post you'll see "mst09098.exe".

http://www.degroeneknop.nl/forum/ind....htm... Read more

Read other 4 answers
RELEVANCY SCORE 51.6

help please...
i just added 2 gig of ram to my lappy.(it was originally using 2 gig)
Since added i realised that windows is having trouble waking from sleep especially if i leave it to sleep for some time ( about an hour of sleep time) when i try to wake it it justs seems to lose power and dies or the fans just keep spinning but nothing happens.... nand i have run windows memory diagnostics... it doesnt seem to detect any problem with the ram..

A:Cant Wake From Sleep

  
Quote: Originally Posted by manusdn7


help please...
i just added 2 gig of ram to my lappy.(it was originally using 2 gig)
Since added i realised that windows is having trouble waking from sleep especially if i leave it to sleep for some time ( about an hour of sleep time) when i try to wake it it justs seems to lose power and dies or the fans just keep spinning but nothing happens.... nand i have run windows memory diagnostics... it doesnt seem to detect any problem with the ram..



Hi manusdn7 and welcome

The windows memory test does not stress your memory enough to tell, plus it is run from within windows.

You need to run memtestx86

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember that memtest errors can be either memory or bad motherboard slots so you may have to test memory one stick at a time, and the slots with known good memory.

Let us know if you need further assistance
Jan

Read other 5 answers
RELEVANCY SCORE 51.6

Hi All,
   My boss just bought a XPS 15 9550 last September.  There are a few cases each week that it does not wake up from sleep.  All drivers are up to date.  I did an online check with Dell for hardware check and all seems fine.
The computer goes into some state that the screen is black, the computer is running and there is nothing else but holding the power button down to restart it.

It's frustrating. 

A:Cant wake up from Sleep

Hi,
Thank you for writing to us!
We would like to apologize for the inconvenience caused.
In this case we would suggest you to update the BIOS to the latest version. Also update the chipset drivers on the system ( un-install -> restart system -> install ).
Kindly private message the service tag and email address.
Thanks
Robin

Read other 1 answers
RELEVANCY SCORE 51.6

Having struggled to get my computer to sleep -

When I do a wake up from 'Sleep' I get - Windows did not shut down correctly.
It then offers the 'Safe Options' list,

Anyone know why it does this?

A:Wake up from sleep

Does the power remain connected to the PC?

Read other 5 answers
RELEVANCY SCORE 51.6

Hi, I was wondering if anybody has had this problem before?

My computer was put to sleep earlier on today, and I moved the mouse to turn it back on. The power light went from orange (sleep mode) to blue (powered on). Nothing was displayed on the machine. Bashed some buttons, nothing happened, so did a hard reboot.

The power button went red (which happens if I hard reboot it) then to blue but that's it. The fans and hard drive starts going, but no beeps, no POST, no display. Nothing.

Already, I've tried:

- Reseating my RAM sticks - nothing
- Unplugging the hard drive - bf actually broke a sata slot, although he says it was lose before. The pins are not straight now and I can't get the black slot back onto the mobo. Plugged hard drive into sata 2 slot, still get no reaction.

Anything else I can try?
 

A:Can't wake up from sleep.

Try clearing CMOS, see if that helps.

http://time4tech.com/article25.html
 

Read other 3 answers
RELEVANCY SCORE 51.6

Hi all,
I have win 7 x64 running on a custom built machine. Every now and then the machine freezes up when I try to wake it up from sleep (usually overnight). I have not made changes to make it hybernate. I experienced this again last night and am wondering if I could get some help analyzing this minidump as I don't know how to analyze it.

Any help will be appreciated.

Thanks!

A:win 7 won't wake up after sleep

Hello IndianinIA,

I wonder if that was caused by your network driver. Try uninstalling and reinstalling that driver, e1e6032e.sys, and make sure that you get the latest version.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Jonathan\Desktop\020810-18921-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02a00000 PsLoadedModuleList = 0xfffff800`02c3de50
Debug session time: Sun Feb 7 23:28:12.828 2010 (GMT-5)
System Uptime: 0 days 13:16:53.125
Loading Kernel Symbols
...............................................................
................................................................
..............................
Loading User Symbols
Loading unloaded module list
...............
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 9 answers
RELEVANCY SCORE 51.6

I try hitting the power button, nothing. I have to restart, it takes a long time to read the hd's in bios, then when it restarts there is no network connection, so I need to restart again.

no real pattern to this, sometimes I leave the machine on all night and no problems, other times just a couple hours and it happens.

I am also using a wireless mouse/kb if that makes a difference.
bp

A:win 8 goes to sleep (i think) and won't wake up

Originally Posted by badperson


I try hitting the power button, nothing. I have to restart, it takes a long time to read the hd's in bios, then when it restarts there is no network connection, so I need to restart again.

no real pattern to this, sometimes I leave the machine on all night and no problems, other times just a couple hours and it happens.

I am also using a wireless mouse/kb if that makes a difference.
bp



I think you switch to second screen try to plug-in the second monitor and switch only PC screen only

Read other 3 answers
RELEVANCY SCORE 51.6

Hi guys, srry haven't been to tech support guy for awhile, in case if i miss any information, feel free to remind me
and i'll post it asap.

My laptop is about 2 years old (Acer Aspire 6920), one day like any normal day i was away from my laptop
and it went to sleep. The next time i was using it i tried to wake it up, it froze for around 10 mins, so i tried to
restart it and the next thing i knew it only starts up to "startup repair". Any attempts to access safe mode to
debug the computer has failed and since then the laptop has gone on a loop -->fail to repair in startup repair
--> restart computer again --> running startup repair. So i decided to reinstall the OS.

after reformatting and reinstalling windows 7 to my laptop though, i seem to encounter a similar error. The laptop
seems to work fine although whenever it goes to sleep and i try to wake it up, the screen froze and starts
flashing and the laptop wont work until you restart the computer again. I made my second attempt to reinstall
a new OS to the system and the same error occurred. My laptop has the latest bios and i tried various versions
of drivers for my graphics card (intel 965 chipset) and the problem continues to persist.

I was wondering if there's any program to debug this error or whether this is a hardware error that i can somehow detect.

Thanks!

Acer Aspire 6920
Windows 7 32 bit operation system
 

A:Cant Wake up from Sleep

bump
 

Read other 1 answers
RELEVANCY SCORE 51.2

CPU runs high all the time,even with mouse movement only. No certain app running high, just the fact one is running = high cpu... During the Panda Active Scan, my McAfee did remove some 'harmful' programs. Browser locks up. Using XP IE7. If two or more apps are running, CPU stays at 100 percent. Have used spyware removal, turned off updates and rebooted, etc. Thanks.

Deckard's System Scanner v20071014.68
Run by Janelle Ray on 2008-03-30 14:55:42
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.


-- Last 5 Restore Point(s) --
51: 2008-03-30 20:55:55 UTC - RP1524 - Deckard's System Scanner Restore Point
50: 2008-03-30 17:27:12 UTC - RP1523 - Configured Turbo Lister
49: 2008-03-29 21:54:06 UTC - RP1522 - System Checkpoint
48: 2008-03-28 21:14:22 UTC - RP1521 - System Checkpoint
47: 2008-03-27 21:11:59 UTC - RP1520 - Software Distribution Service 3.0


-- First Restore Point --
1: 2008-02-20 00:32:50 UTC - RP1474 - System Checkpoint


Backed up registry hives.
Performed disk cleanup.



-- HijackThis Clone ------------------------------------------------------------


Emulating logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2008-03-30 14:59:01
Platform: Windows XP Service Pack 2 (5.01.2600)
MSIE: Internet Explorer (7.00.6000... Read more

A:cpu runs high

bump bump

Read other 1 answers
RELEVANCY SCORE 51.2

Why is it doing that? My computer is a year old. Toshiba Satellite. 
 
The cpu fan used to run really fast and the cpu temp was pretty high. It was like that constantly. This was 2 weeks ago. Now the temp and fan are lower and I don't know why.
 
I did spray it out with air and some dust came out but I didn't notice a drop in temperature and fan speed until several days after that.
 
Is my fan dying? 

Read other answers
RELEVANCY SCORE 50.8

Hi there,
long time reader, first post, I really hope someone can help me with this.

I do have extensive knowledge of both computer hw and Windows 7 OS but
this problem is driving me crazy.

New build
Mobo Asus H81M-K
CPU I7 4790
12GB RAM Kingstone 1300
Video: GeForce 610 2GB ram
3 Sata drives
1 Optical device

all brand new, everything works flawlessly but the only thing is if I put
the computer in sleep mode for more than few minutes
when I wake the machine (either pressing a key on the keyboard,
or pushing the power button, tried, no difference) no signal on the monitor.

Fans will spin, but monitor will be black and the only way to exit this stall
is to force power off, no good.

Things I tried/did/checked:

Chipset updated
Bios flashed to the last available
Intel Management Engine Driver updated
Graphic card, LAN, audio drivers updated
any other possible driver updated, all manually.

Power plan custom set to never sleep, never turn off screen,
no screensaver, no device can turn off to save power,
in short, everything is set for maximum performance,
nothing turns off automatically.

Mouse can't wake the computer up, keyboard can

All the power saving modes and options in the EUFI/BIOS are turned off,
speed step turned off, core parking disabled, turbo boost disabled,
no overclock.

Only C state supported is S3

at the bottom of this post, the list of devices supporting S3 vs all devices
(nothing strange, graphic card was my doubt, but is there, it does support
the S3 s... Read more

A:Monitor won't wake from sleep, tried everything

Anyone?

Read other 8 answers