Over 1 million tech questions and answers.

rejection of docler sign on

Q: rejection of docler sign on

I swear I believe in people that declare issue in outstanding promotion

Read other answers
RELEVANCY SCORE 200
Preferred Solution: rejection of docler sign on

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 44.8

I am using XP Home. For the last few months, anyone trying to log on after the initial user gets the following message:

SAS window:winlogon.exe unknown software exception (0x00000008) occurred in the application at location 0x7c964edl

Eventually, Windows will allow the user to log on, but it is quite annoying to have to attempt to log on several times. This only occurs while the first user is already logged on. The first user to log on never has any trouble. It only affects subsequent users.

A:log on rejection

Check the Application and System logs in Event Viewer for recent errors that might point to where this error is happening. To get to Event Viewer you can go to Start>Run, type EventVwr.msc or open Control Panel double-click Administrative Tools and click on Event Viewer. BTW, have you added any new hardware or drivers recently?

Read other 1 answers
RELEVANCY SCORE 44.8

I am using XP Home. For the last few months, anyone trying to log on after the initial user gets the following message:

SAS window:winlogon.exe unknown software exception (0x00000008) occurred in the application at location 0x7c964edl

Eventually, Windows will allow the user to log on, but it is quite annoying to have to attempt to log on several times. This only occurs while the first user is already logged on. The first user to log on never has any trouble. It only affects subsequent users.
 

A:log on rejection

whats the event viewer say?
 

Read other 2 answers
RELEVANCY SCORE 44.4

My mum is a big user of EBAY. But each time I vist the EBAY site I recieve cookie rejection errors such as :

Cookie Rejection
Set Cookie (Then a jumble of numbers)
Open Cookies with

I've tried third-party internet browsers such as Mozilla Firefox with no luck.
PLEASE HELP

THANKS
 

A:Cookie Rejection

Read other 7 answers
RELEVANCY SCORE 44.4

When sending emails I receive a message "Your email message was unable to be sent because your mail server rejected the message 451 4.7.1 <End of Message> data rejected:ip has temporarily exceeded the allowed mail recipient relay per day"
Is it a coincidence that the problem occurred in=mmediately after accepting a windows update?
Terry Wooden

A:Email rejection 451 4.7.1

Hi Terry, and welcome to Vista Forums.

I'm not sure if Windows Update played a part in this or not, but I would contact your email provider and ask them about the message you received. They should be able to help you better with this.

Hope this helps,
Shawn

Read other 4 answers
RELEVANCY SCORE 44.4

HI, My Father helps to run an Animal Rescue Center in France.
Recently, when trying to email their members (200 plus in blocks of 50), the members who have Hotmail Adress's emails are returned.

An example of this is:

Subject: Undelivered Mail Returned to Sender

This is the SMTP Server program at host orange.fr.

I'm sorry to have to inform you that your message could not be
be delivered to one or more recipients. It's attached below.

For further assistance, please send mail to

If you do so, please include this problem report. You can
delete your own text from the attached returned message.

The SMTP Server program

: host mx3.hotmail.com[65.54.244.200] said: 550 Your e-mail
was rejected for policy reasons on this gateway. Reasons for rejection may
be related to content such as obscene language, graphics, or spam-like
characteristics (or) other reputation problems. For sender troubleshooting
information, please go to http://postmaster.msn.com. Please note: if you
are an end-user please contact your E-mail/Internet Service Provider for
assistance. (in reply to MAIL FROM command)
What is happening How can they Email their Membership if its thought of as spam?
Who's treating it as Spam Orange or Hotmail?
All other Members emails get though fine.

Thank you for you help as the Animals need these messages to get through!

Thanks Stimps
 

A:Hotmail Rejection

Read other 9 answers
RELEVANCY SCORE 44

Lately, when I forward email to some 12-15 recipients in a Group list, I get this message back:

"Mail Delivery Subsystem--Returned mail: User unknown"

Then, in the body of said message, it reads, as follows:

"[email protected]". This email address was not one of the address in my Group list and, in fact, I've never seen it before. I have no viruses, according to my most recent, and latest, checks. Also I'm regularly running several spyware detector programs including: Ad-aware, Spybot and Spy Sweeper.
 

A:Strange Email Rejection

Some people subscribe to an anti spam service that checks all incoming email. If the email service that you are using has also been used by spammers that service provider gets put on an automatic reject list. That recipient will automatically reject all email from anyone using that service. You would have to contact the particular individual that is using that service and ask them to contact the anti spam service and have them allow messages from you.

You could try sending a seperate test email to each individual on your list and see if it will go through that way. If you get a delivery failure message back you should be able to determine which recipient is using that service.
 

Read other 1 answers
RELEVANCY SCORE 44

Yet another problem...

Ok, I have IE6, with SP1 installed. My Yahoo! is my homepage, and since I am the only one using the computer, I have Yahoo remember my name and password so I don't have to re-log-in everytime I open my browser window.

Up until yesterday, everything worked fine. Today, however, I turn on my computer, open IE to check my email, and I'm no longer logged into Yahoo; their default My Yahoo! screen came up as opposed to my personalized one. When I tried logging back in, I entered my username, my password, and then clicked the box indicating I wanted my username and password remembered, but then I get this message:

The browser you're using refuses to sign in. (cookies rejected)

And I am unable to log in. I kept trying, until I finally realize that I am able to log on as long as I do not click the remember name/password box.

Obviously, however, this becomes quite annoying when everytime you open up your browser window, you have to re-sign in.

I checked my internet settings, everythings seems fine. I haven't made any recent changes to my system...

Anyone have a clue if this is a Yahoo! issue, or if it's something on my PC?

BTW, running W2K on a Dell Dimension 4100.

Thank you,
mopargirl
 

A:Yahoo Cookie Rejection

Read other 16 answers
RELEVANCY SCORE 43.2

In a pop-up, Outlook 2002 DEMANDS a password from me every time I try to send or receive e-mail. The blind password (xxxxxx) appears in the box so I know Outlook already has it yet it forces me to re-type it. Sometimes many times. So annoying! Please help. Paula
 

A:OUTLOOK 2002 password rejection

castledown said:

In a pop-up, Outlook 2002 DEMANDS a password from me every time I try to send or receive e-mail. The blind password (xxxxxx) appears in the box so I know Outlook already has it yet it forces me to re-type it. Sometimes many times. So annoying! Please help. PaulaClick to expand...

An having same problem ever since I upgraded to Outlook 2002 from 2000. Is this normal for 2002?
Dave
 

Read other 1 answers
RELEVANCY SCORE 43.2

Hi, I recently purchased 2 Yoga 920s from Lenovo. On one of them I am having serious issues with palm rejection and none of the solutions I can find on the various forums seem to resolve my issue. When writing (e.g. in One Note) and resting my palm on the screen, the cursor keeps "jumping" between my palm and the tip of the pen. This leads to any of the following behaviors:- Not writing at all (e.g. Hello turns into H    l  o)- "writing" where my palm is located- doing some freaky stuff and just creating random lines in the area of my palm and pen  How could I resolve this issue?

Read other answers
RELEVANCY SCORE 43.2

The following is the kind of thing that I get repeatedly. Does anyone else have similar experiences? Does it suggest that a hacker has gained access to my computer and is using it to disseminate scads of spam?
========================
From: Mail Delivery Subsystem <[email protected]>
Date: 2004/06/22 Tue PM 12:44:27 EDT
To: <[email protected]>
Subject: Returned mail: see transcript for details

----- The following addresses had permanent fatal errors -----
<[email protected]>
(reason: 550 5.1.1 unknown or illegal alias: [email protected])
<[email protected]>
(reason: 550 5.1.1 unknown or illegal alias: [email protected])
<[email protected]>
(reason: 550 5.1.1 unknown or illegal alias: [email protected])
<[email protected]>
(reason: 550 5.1.1 unknown or illegal alias: [email protected].
com)

----- Transcript of session follows -----
... while talking to ms-mta-03.tampabay.rr.com.:
>>> DATA
<<< 550 5.1.1 unknown or illegal alias: [email protected]
550 5.1.1 <[email protected]>... User unknown
<<< 550 5.1.1 unknown or illegal alias: [email protected]
550 5.1.1 <[email protected]>... User unknown
<<< 550 5.1.1 unknown or illegal alias: [email protected]
550 5.1.1 <[email protected]>... User unknown
<<< 550 5.1.1 unknown or illegal alias: [email protected]
550 5.1.1 <[email protected]>... Read more

A:Mail Delivery Rejection Mystery

i have seen this a number of times because of a virus - the virus goes through your mail address book - but also all the temp internet files looking for email adresses.

however, recently I have seen this when the PC is completely clean - anyway

1) run a virus scan - if you have your own make sure its upto date with latest virus definitions,

if you have XP or ME turn off restore
you may want to run the scan in safe mode
in XP / ME you will need to switch off restore
http://service1.symantec.com/SUPPOR...src=bar_sch_nam

also try running in safemode
http://service1.symantec.com/SUPPOR...src=sec_doc_nam

[meant to add - you can do an omline scan here or you can Run an online scan from here
http://housecall.antivirus.com/pc_housecall.

see here http://forums.techguy.org/t110854.html for other online scanners ]
 

Read other 1 answers
RELEVANCY SCORE 43.2

I have a yoga 720 and a bamboo ink stylus for it. i had recently sent the unit in to get the hinges replaced as they were warped. I recieved the laptop back and did the latest windows 10 update, however now when i rest my palm on the screen to write it glitches causing what i write to not appear. This was not an issue before sending it in. I am wondering if this is possibly something caused by sending the laptop in or a software issue. It works fine when i write without placing my palm on the screen.

Read other answers
RELEVANCY SCORE 43.2

The X1 Yoga rejects touch as if it were a palm way too easily. When using the X1 in tablet mode, my thumb often is at an angle where the entire thumb is used to scroll through pages, however, the X1 sees this as a palm, rejecting the touch.  Heres a video detailing what I'm talking about. As a note, this does not happen at all on a Surface Pro 4, which actaully knows that I'm using a thumb not a palm. I mean how can the touchscreen mistake my thumb for how big a palm is? Not very happy as I use my X1 in tablet mode to browse the web quite often.

A:X1 Yoga palm rejection way too sensitive

Is there a way to dial back the palm detection sensitivity on the X1 Yoga?

Read other 1 answers
RELEVANCY SCORE 43.2

Hi,My ideapad lenovo yoga 720(13 inches) had wifi problems and a "pen writing" dead zone when I used to write with my palm down. After talking with lenovo support, I ve decided to send it to repair.Days passed and I ve kept checking the repair board seeing messages as " looking for parts" then " repairing" and at the end "repair completed see notes" . But repair notes said " Verified orderly functioning. Taken functional tests for the device. "Now I am worried that they didn't repair my laptop. So I was asking myself "what did the message looking for parts meant"? Hope to hear somebody who had/ is in my same situation. Here's a video with the main problem. I received the PC. They didn't repair it because they marked it as "working unit". I am mad of this. Palm rejection is not working correctly or pheraps is the entire Display Digitizer. The funny thing is that I ve send it with a "tempered glass attached". I knew that if a repair centre has to deal with tempered glass "They will always peel it off" before starting to work on it. Well It is still there, that states the quality of the whole operation. Should had bought something else. Here I attach the video (italian "dubbing" sorry).https://youtu.be/-y47lqillhY

Read other answers
RELEVANCY SCORE 42.8

Using Windows 7, Windows Live Mail.When forwarding emails, I get a lot of popups saying the pictures could not be found, do I want to send the message anyway. Is there anything that can be done about this
 

A:Windows Live Mail Picture Rejection

Maybe you need to adjust your security settings.

The below fix depends on what version of the software you have.

----

In LiveMail, clear the &#8220;Block images and other external content in HTML email&#8221; checkbox, by doing the following:
Open the software
Click on Tools
Click Options.
Switch to Security tab.
Clear the box that says &#8220;Block images and other external content in HTML email&#8221;
Click OK.

That process may not work, but it's worth a try (also, you may not have a "tools" option in your version)

----

See if that helps.
 

Read other 1 answers
RELEVANCY SCORE 42.8

I bought the Lenovo Flex 5 with digitizer and active stylus hoping I would be able to use it for drawing and painting as well as writing notes/ journaling as it's advertised to be capable of but I'm really disappointed. First of all, if my palm is resting on the screen the pen acts really glitchy. Only about 10% of what I write/draw is registered at all and half of that is really delayed. Additionally the action isn't very accurate, if I use a ruler to draw a line it tuns out jagged and bumpy and everything I write/ draw looks really sloppy. I've used a Microsoft Surface Pro 4  and an iPad Pro with the pencil and none of these things were an issue, the outcome was as accurate as pen and paper.  I've tested out several applications/ programs, some are better than others but none of them are good enough for me to really want to use. I replaced the the active stylus with a Wacom Bamboo Ink stylus, the rubber tip feels better to use but the results are still the same. I also went to a store and tested both of my pens on the two Flex 5s they had on display and it was all the same. Is this a software issue that can be improved through updates? Or is anyone having a positive experience drawing on a Flex 5? It is advertized to have palm rejection, accuracy and pressure sensativity, there is digitizer technology that succesfully achieves all of those things for a plesant writing/ drawing experience so why doesn't this?

Read other answers
RELEVANCY SCORE 42.8

I've noticed that a portion of the screen of my yoga 720 won't respond to my wacom stylus while my palm is resting on the screen. I've tried the "ignore touch" option in windows settings with no avail. Anyone else have this issue? Is this something I can fix on my end?

Read other answers
RELEVANCY SCORE 42.8

As a new owner of the C930, I'm very much enjoying the experience.  Last night I started to play around with the Pen and doing some sketches and drawings using some built-in Windows 10 apps.  The experience was fine especially after I adjusted some Pen settings in Windows 10.  But one thing I noticed was there were some blemishes outside of my main drawing where possibly my palm was on the screen.  Small blemishes which I could "erase" but just wondering if others have the same issue and how you solved it. Thanks in advanceAmar

Read other answers
RELEVANCY SCORE 42.8

Hi,I'm totally dissatisfied with the outcome of my compensation claim. While reviewing the outcome, i could understand that the person who reviewed my case doesn't either study my case or doesn't even know why I'm claiming 600$ compensation. So i decided to explain my case to get you an overview what had happened and why I'm claiming for the compensation.Timeline30/06/2016 : Order was placed successfully for laptop model HP envy ae030tx with order number SCPO66872201/07/2016 : Payment cleared and was successful (AUD 1000.02) and offered 8 day delivery.<No communication from HP and was in need of laptop urgently for my work and studies>12/07/2016 : Order cancelled and informed through email. Replied email asking for explanation and expressing my urgency.15/07/2016 : Offered AUD 300 as a compensation by Sales person Sarath Raj by email explaining the unavailability of the product I ordered. Replied the email asking for either an alternative model HP Omen ax011tx or a compensation amount of AUD 699 to purchase the same model (HP envy ae030tx) from ebay HP authorised seller.<No reply or contact for that mail and I waited for 3 working days>19/07/2016 : I purchased the same model laptop from ebay HP authorised seller for amount (AUD 1649) since the stock availability from the ebay seller was going down and i was really in need of a laptop for my work and study.19/07/2016 : Replied to previous emails indicating that I was forced to buy the laptop because of those reason... Read more

Read other answers
RELEVANCY SCORE 42.4

Hi, I'm having problems with the palm rejection on my X1 Yoga. When using the TB3 port for video output to external monitors, the palm rejection gets twitchy when I have my palm on the screen and the supplied pen jumps all over the screen while drawing. The same exact thing happens with my Wacom Bamboo. When I stop using the TB3 port (either unplugging or set display to PC only), the insane jitter goes away and the palm rejection works normally. Also, if I use the pens with my hand lifted off the screen, there is no jitter. I tried the same thing on the HDMI connection and the palm rejection seems to be working fine. Any suggestions? I'm on Windows 10 Build 17134 & BIOS Firmware N25ET39W (1.25) and have all the latest updates installed through Lenovo Vantage. Thanks!

Read other answers
RELEVANCY SCORE 42.4

After upgrading to windows 10, palm rejection while using the stylus no longer works, causing there to be multiple glitchy inputs while the pen is active. It's set to right handed pen use and it's still messed up. The other thing is that crystal disk info says that there's no health setting for my SSD and most of it's stats are "unknown". Anyone know of any solutions to these issues?

Read other answers
RELEVANCY SCORE 42.4

I could really use your help! I use OneNote on my Yoga 14 (Type 20FY) to take notes in veterinary school and I've had an issue for the past year or so. While in tablet mode, if I'm using the stylus pen, it will take anywhere from 2 to 15 seconds after removing the pen from the screen to allow input with a finger. Sometimes it takes even longer than that and I have to either unfold the screen or write with the pen again to finally get it to toggle palm rejection off again. Here's a link to a video I made a few minutes ago of the issue https://youtu.be/-RPDYB96GXk  I usually just keep the computer folded over my left arm while writing with my right so that I can unfold it quickly and refold it, but this slows my note-taking drastically and drives me crazy! Even when everything is running perfectly, my classes cover so much material that I can't keep up, so this is really an issue for me.  This problem NEVER occurs when the computer is in laptop mode - the palm rejection toggling happens instantly every single time while in laptop mode. This makes me believe it might be a setting somewhere in the tablet mode code. Any suggestions are welcome and I'd be completely fine with disabling tablet mode entirely if that's possible. Below is some info on the system, if you need more info, let me know!Yoga 14 (Type 20FY)64 bit Windows 10 HomeMicrosoft OneNote 2016 MSO (16.0.8528.2126) 32 bit

Read other answers
RELEVANCY SCORE 42.4

I got my Yoga 260 around 10 days ago. I first updated my windows 10 to the new release (so I'm not sure if the problem was there from the begining). The pen is not working as it should be, the tip is not detected or detected by some offset (usually it goes into bottom of the screen besides taskbar). For example I start writing in onenote and suddenly instead of writing on the current line it is writing some wiggly things on the bottom of the page. This is not only happening in onenote or inking apps, even when I'm using the pen for selecting lines in a webpage, jumps happen.   Is this a pen problem? or display digitizer? Also I'm not sure if this is a driver problem or hardware problem. I tried to rollback to original installed windows 10 to test that, using factory resseting but I couldn't, windows keeps the upgrade. I checked the wacom driver it is recent 08/02/2016 even more recent than the one available on wacom's website (I tested both). I changed the pen and inking setting: made the handness to "right hand" and "Ignore touch input when I'm using my pen" to on, but nothing helped. It is really frustrating, because I mainly bought this notebook because of its stylus. So anyone else had the same problem? Any fixes for that?  Thanks

Read other answers
RELEVANCY SCORE 42.4

I got my Yoga 260 around 10 days ago. I first updated my windows 10 to the new release (so I'm not sure if the problem was there from the begining). The pen is not working as it should be, the tip is not detected or detected by some offset (usually it goes into bottom of the screen besides taskbar). For example I start writing in onenote and suddenly instead of writing on the current line it is writing some wiggly things on the bottom of the page. This is not only happening in onenote or inking apps, even when I'm using the pen for selecting lines in a webpage, jumps happen.   Is this a pen problem? or display digitizer? Also I'm not sure if this is a driver problem or hardware problem. I tried to rollback to original installed windows 10 to test that, using factory resseting but I couldn't, windows keeps the upgrade. I checked the wacom driver it is recent 08/02/2016 even more recent than the one available on wacom's website (I tested both). I changed the pen and inking setting: made the handness to "right hand" and "Ignore touch input when I'm using my pen" to on, but nothing helped. It is really frustrating, because I mainly bought this notebook because of its stylus. So anyone else had the same problem? Any fixes for that?  Thanks

Read other answers
RELEVANCY SCORE 42

I have a Win 7 Family pack Home Premium Upgrade edition. I bought it new and have had exclusive control of it. The 32 bit version is installed on two computers, self built, replacing XP. One of the computers had a HD crash. I first tried a system repair disc and installing a system image. When these did not work I tried to reinstall Win 7 on that HD, but Win 7 would not install on the HD and delivered a message that there was a HD problem. I installed a new SSD but no other equipment changes were made, other that disconnecting the other two HDs for purposes of the reinstall. Windows installed nicely from a flash drive, but is giving a message that the product key is incorrect.
I would appreciate insight on how to proceed. Thanks!

A:Prod key rejection on reinstall after HD failure- home prem family pac

Hello TMac, and welcome to Seven Forums.

What's the full error message?

Double check to make sure that you are entering the product key correctly. It's real easy to mistake say a 0 (zero) for an O (letter) etc.....

If it's just failing to activate online, then you might see if it may activate by phone instead.

Hope this helps for now,
Shawn

Read other 5 answers
RELEVANCY SCORE 41.6

EnvironmentOS: Windows 10 Pro x64, version 1903, OS build 18362.207BIOS: R0RET38W 1.21Pen: ThinkPad Pen Pro for L380 Yoga (01LW769)Power adapter: Lenovo 45W Standard AC Adapter (USB Type-C)Lenovo Vantage: Version 4.27.32.0All drivers are up-to-date Steps to reproduce1. Plug the power adapter's USB Type-C connector to the laptop.2. Don't plug the other end of the power adapter into a power outlet.3. Hover the stylus over the screen until the cursor is displayed.4. Place your plam on the screen and move your hand. Expected ResultThe cursor should be smooth as you move the stylus around the screen, which it is once you unplug the charging cable from the laptop. Actual ResultPalm rejection fails once the USB Type-C charging cable is fitted into the laptop's charging port. It does not matter if the power adapter is connected to a power source.  

Read other answers
RELEVANCY SCORE 41.6

I went into my User Accouts in the Control Panel. I deleted a User called Nathon. I created a new user account with Admin authority named Jack.
However, everytime that I start my computer from my morning bootup, the Signon Window has the deleted User, Nathon.
I have to type in Jack, for the new user, and I get into Jacks Account.

Why is Windows not remembering that I have deleted the USER, Nathon?

I have never had such a problem with any of my other windows computers.



Operating System
MS Windows XP Home 32-bit SP3
Installation Date: 28 April 2010, 17:47
Serial Number: B2KW2-WFXJP-DYBT7-HF44F-TJJ9W
Windows Security Center
Windows Update
AutoUpdate Download Automatically and Notify Prior to Install
 

Read other answers
RELEVANCY SCORE 41.6

You have recently removed one or more virusus from this computer, but now a new one has appeared.

First, AOL is extremely slow to start when I click on the icon. Once I've signed on, after a time a new sign-on screen appears on top of what I'm doing. I cancel that one. Soon I see activity at the bottom of the screen (where ordinarily you see "Done" or "//http:/..." etc. The virus is doing its own AOL activity! Soon afterward AOL is canceled, as if I had canceled it.

Also, Microsoft XP suddenly announces they are having to increase my virtual memory. Paging size is currently at 384 Mb, and my RAM is 1.25 GB. This is happening more and more frequently.

I have again changed my AOL sign-on password, and I no longer permit it to use the password automatically (I have to enter it at each sign on).

Thanks for any help you can provide.

A:Repeating AOL sign-ons, growing virtual memory, slow sign-ons

Hello,And welcome to BleepingComputer.com, before we can assist you with your question of: Am I infected? You will need to perform the following tasks and post the logs of each if you can.Malwarebytes Anti-MalwareNOTEMalwarebytes is now offering a free trial of their program, if you want to accept it you will need to enter some billing information, so that at the end of the trial you would be charged the cost of the product. Please decline this offer, if you are unable to provide billing information. If you want to try it out, then provide the billing information.Please download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program bef... Read more

Read other 21 answers
RELEVANCY SCORE 41.2

After having done the update, I'm having two issues that are bugging me:

1. I cannot change the lock screen from the "cave by the shore" default nor bypass it (Brink is working on the bypass issue I believe)

2. If I go into netplwiz and uncheck the need for a password, the "Welcome" screen has the system default user picture, that drawing of a circle over an arch, not the picture I assigned to the account. With the need for a password, the picture on both the sign-in screen and "Welcome" screen is correct tho.

The lock screen issue I can live with since I normally don't use a password, but the default user picture is bugging me. I went into %ProgramData%\Microsoft\User Account Pictures and replaced all the default pictures with ones the same name and size of the picture that I have for the account, but it still shows the default.

I've searched around for another place where the default picture is, but cannot find any, even with the search including hidden system files.

Anybody know where the system default user pictures are stored, other than in the User Account Pictures?

A:Odd Sign-in versus Auto Sign-in Problem in 1607

Hello TheSchaft,

Q1) I've added OPTION THREE in the tutorial below to be able to disable the lock screen again, but it doesn't do so at startup.

Lock Screen - Enable or Disable in Windows 10
Q2) I'm not aware of way to stop this yet when you have netplwiz set to automatically sign in to an account at startup. The blue note box at the top of the tutorial below will show you the default locations for account pictures to help.

Account Picture - Change in Windows 10

Read other 4 answers
RELEVANCY SCORE 40.4

Hey everyone

Every now and then my Windows 8.1 x64 shows the first sign-in sequence after a restart. I noticed it most recently happened after a normal Start->Power Options->Restart. I'm quite sure it has also happened after right clicking on start button (Control-X) and restarting from there, as well as from a custom shortcut I have for restart (shutdown.exe /r /t 00).

I had just finished installing IBM SPSS 22 for a class I'm taking, but I think this is unrelated.
It goes through the whole "Setting Up Your PC" and "Installing your apps" screens even though its perfectly fine and and all my data including app data is still there. See the attached file for an example of what was most noticeably shown.

With another incident, something similar to this happened but it actually reset some of my settings for things like MediaMonkey, Connectify Hotspot, GOM Player and VLC player. It was like they had been started for the first time ever with no license information or preferences like Always on Top.

Its not a matter of urgency but I keep worrying that one day it will actually mess with my system in a very annoying way.

Has anyone else experienced anything like this?
Thanks

Read other answers
RELEVANCY SCORE 40.4

So I just reinstalled Windows 10 on my machine.

Before I had it set up so that I could log in with a password or fingerprint.

Now it seems my only options are (1) password only OR (2) password, PIN or fingerprint.

I don't want PIN as a sign in option. But I have to enable PIN via "Windows Hello" before enabling Fingerprint sign in.

And once I have fingerprint sign in enabled, if I remove the PIN I lose both PIN and fingerprint sign in options.

Any ideas how I can set up password and fingerprint as my only two sign in options?

Read other answers
RELEVANCY SCORE 38.8

Ever time I switch coputer on its as if its the first time,It tell me to register my soft wearMy desk top is newAnything that I have saved is not thereTool bar is new any thing I had on tool bar is gone I get a quick message when I sign inThat says I am Temporary sign in and can't acess files says more but is to quick to read any help please Thanks

Read other answers
RELEVANCY SCORE 38.8

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3895 Mb
Graphics Card: Intel(R) Graphics Media Accelerator HD, 1723 Mb
Hard Drives: C: Total - 465774 MB, Free - 414091 MB; D: Total - 11062 MB, Free - 1580 MB;
Motherboard: MSI, IONA
Antivirus: PC Cleaner Pro, Updated: Yes, On-Demand Scanner: Disabled
My home page is my.yahoo. Browser is Firefox. After I close PC I have to sign on w/username & password, EVERY TIME. (I check box "keep me signed on for 2 wks, but it doesn't work). Same thing for my TV program guide. I'm in Fla & guide changes to Philadelphia area programs, requiring me to re-enter local zip code.
 

A:home page sign in & other sign ins

Read other 16 answers
RELEVANCY SCORE 37.6

Windows Fixit, num lock fix 50087, kb 154529


Vista Home Premium, Acer Aspire 6930, Centrino 2 duo, 4g memory.


Since installing this fix, which did'nt work, I keep getting the popup error message 'LogonUI.exe (this varies) -Bad Image, then text 'C:\PROGRA-1\google\GOOGLE-2\GOEC62-1.DLL is either not designed to run on Windows or contains an error.' Before installing it said setting a restore point, trying to restore there are no restore points. How is this, thought the system (Vista home premium) automatically set restore points. This popup is messing the system up bigtime, almost impossible to load programs etc. as it constantly pops up and will not cancel.
Any clues on how I might get rid of this problem? Unable to find help on Microsoft sites.
 

A:Solved: Tiger2010Felix12.2007 0 Sign In to Vote 0 Sign In to Vote Since installing

Read other 7 answers
RELEVANCY SCORE 36.4

My younger brother and I share a computer. It is Windows 10 Pro. I was letting him use it while i was asleep. All I know is that he was playing his video games. Anyways, he left the house to go hang out somewhere and i wake up to see that when i turn on the computer, only his account shows at the sign-in screen. Meanwhile, there are THREE accounts on this computer. My account, His account, and a local that my other siblings use sometimes. I restarted and even shut down my computer about 4 times. I waited until he came back and logged on his account to check what was wrong, and I see that my account is still there with all my files and docs. The other local account is there too. I log out to see if my User name is there but it isn't. I tried to see if my account was deactivated using these methods but none of them worked. I've looked on Microsoft's forums but all I found was how to activate the built-in administrator account. Please do your best to help!! I have important work to do on my account but i can't access it.

Read other answers
RELEVANCY SCORE 36

Does anyone know any good Sign-In/Sing-Out Board programs for windows for business use??
 

A:Sign-In/Sign-Out Programs

Read other 6 answers
RELEVANCY SCORE 36

Hi all... I've a problem on my machine... windows xp do a log off after i log in... I did a windows repair and now i can enter the safe mode but not the normal windows... now appears a blue screen... i did a highjack scan and the log is this... could anybody help me...
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:26:51, on 04-02-2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Safe mode with network support

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\TortoiseSVN\bin\TSVNCache.exe
C:\PROGRA~1\Mozilla Firefox\firefox.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.manufactor.pt/portal
R1 - HKCU\Software\Microsoft\Internet Connection Wizard,ShellNext = http://go.microsoft.com/fwlink/?LinkId=74005
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Window Title = Microsoft Internet Explorer provided by * * * PHC Norte * * *
R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,ProxyOverride = *.local
F2 - REG:system.ini: UserInit=C:\WINDOWS\system32\userinit.exe,C:\WINDOWS\system32\wsc... Read more

Read other answers
RELEVANCY SCORE 35.2

I Just had a log in error. I have a Dell Precision 7710 mobile work station with the Anniversary Update. I turned on the machine and tried to log in and got:

---------------
We can't sign into your account
This problem can often be fixed by signing out of your account, then signing back in. If you don't sign out now, any files that you create or changes that you make will be lost.
---------------

Logging out and restarting did not work. I shut it down, undocked (it is a Thunderbolt Cable Dock), and then restarted. Luckily it was back to normal log in. I shut down docked, and booted and it was normal log in again.
Not sure what happened. Hope the issue does not come back.

I read online this happened to others, but cannot find a cause or fix (other than restarting) and wondering if anyone knows why this happened.

thanks

Read other answers
RELEVANCY SCORE 28.8

ive set my desktop pc to sign in with a PIN. now, when I want to sign in on my windows 8.1 Dell tablet, it doesn't give me the option to enter a pin for that Microsoft account. if I try to use the password I had before the PIN, its now incorrect. how can I get signed in to my tablet?

Read other answers
RELEVANCY SCORE 28.8

I'm getting a error message that says your computer is running low on resources so no new user's can sign in please use an account that has already been signed in what does this mean I am not a new user
 

Read other answers
RELEVANCY SCORE 28.8

When I turn pc on, within last week it  goes to a page where address is http:// l.yimg.com/rq/Darla/2-7-5/html/r-sf.html.When that page comes up, a notice also comes up says page cannot be displayed . From there I hit homepage icon and it goes directly  there with no other problems. This has been happening for last week or so.Any ideas what or why? Paul

A:SIGN IN ?

 Sounds like malware.  Download & install Malwarebytes and do a scan with it.

Read other 2 answers
RELEVANCY SCORE 28.8

My daughter brought a dell computer ( I thought I had brought her up right but guess not ) Back to my question. It has a program or something that keeps you from having to enter a pass word to get into the XP. Is this something Dell has written and supplied or is there such a software available. Since only I use the computer it would be nice to have a program like that.

Thanks
 

A:XP sign on

Read other 7 answers
RELEVANCY SCORE 28.8

After installing XP PRO on my pc, I was directed to sign on names to create accounts to use it. I don't want to have to assign names in order for others to use my PC. Is it mandatory to do this??? How do I delete a name if I no longer want it?
Thanks,
Bev
 

A:XP PRO sign on

Read other 14 answers
RELEVANCY SCORE 28.8

Stuck at sign in screen. I type in my password and it says PC is offline. Please sin in with the last password used on this PC

Read other answers
RELEVANCY SCORE 28.8

hi i keep getting this message when i try to sign in on msn. i have disabled my firewall but still no luck. any help. here the message i get

Thanks
 

A:cant sign in on msn!!

Hi,
MSN would like to hear from people who cannot connect and get the same exact error number you have, please go HERE
and follow the instructions in the post by Daniel,

http://spaces.msn.com/members/MessengerSays/

Posted by Daniel

We are trying to collect additional info from users receiving the 80048883 error code when they try to sign in. If you are using MSN Messenger 7.5 or Windows Live Messenger 8.0 and you get this error please send an email to [email protected]. We&#8217;ll help you sign in, and you'll be helping us make Messenger Better.

11:03 AM | Permalink | Comments (90) | Trackbacks (1) | Blog it | Other Click to expand...

Also:

Bookmark this page, it's hard to find.

Go down through the list of help and try what is shown.

http://support.msn.com/eform.aspx?p...=support_home_options_form_byemail&ct=eformts
 

Read other 1 answers